PARAMETRIC STUDY ON THE GEOMETRIC PARAMETERS OF CORRUGATED BLAST WALL

Hanmuhammet , Gayypov (2017) PARAMETRIC STUDY ON THE GEOMETRIC PARAMETERS OF CORRUGATED BLAST WALL. [Final Year Project] (Submitted)

[thumbnail of Parametric study on geometric properties of corrugated blast wall.pdf] PDF
Parametric study on geometric properties of corrugated blast wall.pdf
Restricted to Registered users only

Download (2MB)

Abstract

After some tragic incidents happened on offshore platforms due to some unexpected internal
loads, such as hydrocarbon explosion or falling of a heavy material from top to a structure, the
consequences had a huge impact on structure, economy, environment as well as human safety.
As a solution, two methods have been suggested to overcome this problem, which are active and
passive explosion proofs. Active explosion proof is the way of preventing the explosion before it
happens, however, this way is considered expensive, also at the same time it is not fully reliable
since it is based on theories of technical failure and human error is not considered. While the
passive explosion proof is to reduce the consequences of an explosion after it happened, which is
inexpensive compared to other options (Sohn et al. 2013). So far, as the best type of passive
safety system, blast walls are being used broadly. Blast walls are designed to cover the
vulnerable structures on top side of the offshore platform to absorb the pressure after the
explosion occurred. The challenge that is being faced in this case is to obtain the optimum
geometric parameters and material type in terms of cost and performance, that can withstand
against various loading conditions. However, to do so, numerous simulations have to be
conducted to obtain the results, which decision will be based on. By varying all parameters,
numerous cases will be created which is too time consuming to analyze and study. Aim of this
paper is to determine most and least significant parameters. Two materials are being used, with
the various material properties, those are High Manganese and 9% Nickel.

Item Type: Final Year Project
Subjects: T Technology > TA Engineering (General). Civil engineering (General)
Departments / MOR / COE: Engineering > Civil
Depositing User: Mr Ahmad Suhairi Mohamed Lazim
Date Deposited: 22 Nov 2018 14:38
Last Modified: 22 Nov 2018 14:38
URI: http://utpedia.utp.edu.my/id/eprint/18122

Actions (login required)

View Item
View Item