Welcome To UTPedia

We would like to introduce you, the new knowledge repository product called UTPedia. The UTP Electronic and Digital Intellectual Asset. It stores digitized version of thesis, dissertation, final year project reports and past year examination questions.

Browse content of UTPedia using Year, Subject, Department and Author and Search for required document using Searching facilities included in UTPedia. UTPedia with full text are accessible for all registered users, whereas only the physical information and metadata can be retrieved by public users. UTPedia collaborating and connecting peoples with university’s intellectual works from anywhere.

Disclaimer - Universiti Teknologi PETRONAS shall not be liable for any loss or damage caused by the usage of any information obtained from this web site.Best viewed using Mozilla Firefox 3 or IE 7 with resolution 1024 x 768.

Noise Modeling

Mohd Amir Nazmi B Romli, Mohd Amir Nazmi (2011) Noise Modeling. Universiti Teknologi Petronas, Sri Iskandar,Tronoh,Perak. (Unpublished)

Full text not available from this repository.

Abstract

From this paper, there will be three studies that have been conducted. There are (1) Fan interaction noise (2) Modeling Noise for HWAT rotor, (3) Modeling near and far field Noise. In first research , a 3-D, unsteady, Reynolds-averaged Navier-Stokes (RANS) CFD code coupled to an acoustic calculation is used to predict the contribution of the exit guide vanes to tonal fan noise downstream. The configuration investigated is that corresponding to the NASA Source Diagnostic Test (SDT) 22-in fan rig. In this chosen configuration, there are 22 rotor blades and 54 stator blades. The stators are located 2.5 tip chords downstream of the rotor trailing edge. The RANS computations are used to obtain the spectra of the unsteady surface pressure on the exit guide vanes. Comparison of the computed sound power level at the exhaust plane with experiment show good agreement at the cut-on circumferential mode. The results and the validation from this investigation validate the use of the CFD code along with the acoustic model for downstream fan noise predictions. Besides that, for second research the paper demonstrates a computational methodology for the noise prediction of an horizontal axis wind turbine (HAWT) rotor in time domain. The aeroacoustic modeling is based on the Ffowcs Williams and Hawkings equation considering only the surface monopole and dipole noise sources.The aerodynamic analysis uses a two-dimensional low-order panel method combined for the calculation of the blade pressure distribution, obtaining satisfactory agreement with experimental data. Sound pressure level contours occur via Fourier transformations, while the directivity for a single frequency source is also examined. The final research is regarding the computational method to compute the near and far field noise of the vehicle. As aerodynamic component of noise is one of major contribution to the noise level that effect the environment, the near field flow time dependent pressure history in the flow is generated using computational fluid dynamic. The Numerical scheme is developed from acoustic far field noise predictions which use the near field solution as input to Kirchhoff formulation.

Item Type: Final Year Project
Subject: T Technology > TP Chemical technology
Divisions: ?? sch_che ??
Depositing User: Users 5 not found.
Date Deposited: 11 Jan 2012 12:23
Last Modified: 19 Jan 2017 15:45
URI: http://utpedia.utp.edu.my/id/eprint/434

Actions (login required)

View Item View Item