Welcome To UTPedia

We would like to introduce you, the new knowledge repository product called UTPedia. The UTP Electronic and Digital Intellectual Asset. It stores digitized version of thesis, dissertation, final year project reports and past year examination questions.

Browse content of UTPedia using Year, Subject, Department and Author and Search for required document using Searching facilities included in UTPedia. UTPedia with full text are accessible for all registered users, whereas only the physical information and metadata can be retrieved by public users. UTPedia collaborating and connecting peoples with university’s intellectual works from anywhere.

Disclaimer - Universiti Teknologi PETRONAS shall not be liable for any loss or damage caused by the usage of any information obtained from this web site.Best viewed using Mozilla Firefox 3 or IE 7 with resolution 1024 x 768.

DESIGN DIP COATER FOR WET COATING TECHNOLOGY

MOHD ISHA, KHAIRULDIN (2005) DESIGN DIP COATER FOR WET COATING TECHNOLOGY. Universiti Teknologi Petronas. (Unpublished)

[img] PDF
Download (2488Kb)

Abstract

WetCoating Technology is widely usedin industries nowadays. Dip coating is one of the techniques used in Wet Coating Technology. The device required to implement the technique is called dip coater. The conventional dip coating technique used to deposit sol-gel thin films on flat substrates is well established and accepted because of its simplicity and the high coating quality that can be obtained. Advanced Material Research Centre (AMREC) SIRIM Berhad as a collaborator provided the dip coater for the project. With the current dip coater, the thin=film produced has several problems including wavy surfaces and non-uniformity of the thickness. The dip coater control box is only limited to two speed controls which are 0.5 mm/s and 1.5 mm/s. The purpose of this project is to improve the performance ofAMREC dip coater by designing a new improved dip coater. Preliminary work of the project involved evaluatingthe performance of current dip coater by analyzing the coatings produced using several characterization tools. Examination of how dip coating process works lead to the identification of what causes thepoorquality of the coating. Factors that contributed to the problems are vibration produced by the sample movement and type of the motor choosen for the dip coater. It was found that the vibration of the system can be reduced when the nut follower pitch was reduced. Circuit of the system has been redesigned to allow the change of the motor movement, control the speed and providing various speed for dipping process.

Item Type: Final Year Project
Academic Subject : Academic Department - Electrical And Electronics - Pervasisve Systems - Digital Electronics - Design
Subject: T Technology > TK Electrical engineering. Electronics Nuclear engineering
Divisions: Engineering > Electrical and Electronic
Depositing User: Users 2053 not found.
Date Deposited: 30 Sep 2013 16:55
Last Modified: 25 Jan 2017 09:46
URI: http://utpedia.utp.edu.my/id/eprint/7619

Actions (login required)

View Item View Item

Document Downloads

More statistics for this item...