Welcome To UTPedia

We would like to introduce you, the new knowledge repository product called UTPedia. The UTP Electronic and Digital Intellectual Asset. It stores digitized version of thesis, dissertation, final year project reports and past year examination questions.

Browse content of UTPedia using Year, Subject, Department and Author and Search for required document using Searching facilities included in UTPedia. UTPedia with full text are accessible for all registered users, whereas only the physical information and metadata can be retrieved by public users. UTPedia collaborating and connecting peoples with university’s intellectual works from anywhere.

Disclaimer - Universiti Teknologi PETRONAS shall not be liable for any loss or damage caused by the usage of any information obtained from this web site.Best viewed using Mozilla Firefox 3 or IE 7 with resolution 1024 x 768.

Modeling and Simulation of the Switched Reluctance Motor

Ahmed Shaikh, Raheel (2011) Modeling and Simulation of the Switched Reluctance Motor. Universiti Teknologi Petronas, Sri Iskandar,Tronoh,Perak. (Unpublished)

Full text not available from this repository.

Abstract

This Paper summarizes the study conducted on the techniques used and implemented to minimize the torque ripple of the Switched reluctance Motors. These motors although offering the advantages of higher speeds, reliability and phase independence, have the limitations of the torque ripple and non-linearity in the magnetic characteristics. Thus in order to have the good understanding of the Motor, it is simulated in the MATLAB/SIMULINK environment. This paper describes details on modeling of two different configurations of Switched Reluctance Motor concentrating only on the linear model by obeying all of its characteristics. The two configurations of motors are applied with two different control techniques and the results are calculated and tabulated. Load and No load analysis are also performed to understand the behavior of motor with load. Through out the analysis, various values of turn-on and turn-off angles are selected and finally the optimum values are calculated based on the performance parameters of Average torque, speed and torque ripple. All simulations are documented through this paper including its block models and initializations performed. Finally a control technique is recommended which produces the best results with smallest torque ripple

Item Type: Final Year Project
Subject: T Technology > TK Electrical engineering. Electronics Nuclear engineering
Divisions: ?? sch_ecs ??
Depositing User: Users 5 not found.
Date Deposited: 11 Jan 2012 12:23
Last Modified: 19 Jan 2017 15:45
URI: http://utpedia.utp.edu.my/id/eprint/775

Actions (login required)

View Item View Item