Welcome To UTPedia

We would like to introduce you, the new knowledge repository product called UTPedia. The UTP Electronic and Digital Intellectual Asset. It stores digitized version of thesis, dissertation, final year project reports and past year examination questions.

Browse content of UTPedia using Year, Subject, Department and Author and Search for required document using Searching facilities included in UTPedia. UTPedia with full text are accessible for all registered users, whereas only the physical information and metadata can be retrieved by public users. UTPedia collaborating and connecting peoples with university’s intellectual works from anywhere.

Disclaimer - Universiti Teknologi PETRONAS shall not be liable for any loss or damage caused by the usage of any information obtained from this web site.Best viewed using Mozilla Firefox 3 or IE 7 with resolution 1024 x 768.

Pull-Out Tension And Flexural Capacity Of Adhesively Jointed Steel Plates Under Different Temperature

Siti Nur Hanani Sulong, Siti Nur Hanani (2008) Pull-Out Tension And Flexural Capacity Of Adhesively Jointed Steel Plates Under Different Temperature. Universiti Teknologi Petronas, Sri Iskandar,Tronoh,Perak. (Unpublished)

Full text not available from this repository.

Abstract

Adhesive bonding has established a remarkable interest in civil construction industry because of its proven success and wide application in aerospace and automotive industry. In fact, the application of adhesive has existed in construction of civil engineering facilities since 1960s in which the major application dominated by the segmental construction, externally-bonded reinforcement, structural repairs to concrete and also non-structural application. However, lack of design code and comprehensive research related to the use of adhesive bonding in load-bearing connections made this method of joining less attractive. Therefore, this experimental research was conducted to study the pull-out tension and flexural capacity of adhesively jointed steel plates. The effects of some of the critical variables on the performance of adhesive joint were investigated namely the overlapping length, curing temperature and joint configuration particularly single-lap joint. single-strap joint and double-strap joint. Only one type of commercially available structural adhesive namely Sikadur -30 was used to join the 100mm wide steel strips. It was observed from the test results that the stiffness and load carrying capacity of adhesive joints subjected to pull-out tension increases with decrease in overlapping length. Investigation the effects of the curing temperature; it was noted that at 45°C the adhesive was fully cured. On the other hand, the double-strap joint has shown much higher loading capacity under all loading conditions such as pull-out tension and bending. It has performed best amongst the three other types of joint designs investigated. The available results of this research study is a primary effort in order to establish the future research studies for adoption of adhesive joints as structural connection in the global construction industry.

Item Type: Final Year Project
Subject: T Technology > TA Engineering (General). Civil engineering (General)
Divisions: ?? sch_civ ??
Depositing User: Users 5 not found.
Date Deposited: 11 Jan 2012 12:24
Last Modified: 19 Jan 2017 15:49
URI: http://utpedia.utp.edu.my/id/eprint/790

Actions (login required)

View Item View Item