Welcome To UTPedia

We would like to introduce you, the new knowledge repository product called UTPedia. The UTP Electronic and Digital Intellectual Asset. It stores digitized version of thesis, dissertation, final year project reports and past year examination questions.

Browse content of UTPedia using Year, Subject, Department and Author and Search for required document using Searching facilities included in UTPedia. UTPedia with full text are accessible for all registered users, whereas only the physical information and metadata can be retrieved by public users. UTPedia collaborating and connecting peoples with university’s intellectual works from anywhere.

Disclaimer - Universiti Teknologi PETRONAS shall not be liable for any loss or damage caused by the usage of any information obtained from this web site.Best viewed using Mozilla Firefox 3 or IE 7 with resolution 1024 x 768.

Electrical Power System Modeling and Simulation of Putrajaya Precinct 5 Gas District Cooling Plant

Mohd Taib, Nurul Nashwar (2004) Electrical Power System Modeling and Simulation of Putrajaya Precinct 5 Gas District Cooling Plant. Universiti Teknologi Petronas. (Unpublished)

[img] PDF
Download (3799Kb)

Abstract

As a prerequisite for FYP, the author is required to submit a dissertation that records on going study of electrical power system in a Gas District Cooling (GDC) Plant located in Putrajaya Precinct 5, which subsequently is simulated to explore the system behaviour and response. Two major approaches of power system analysis, which has been covered, are load flow and short circuit studies. In relation with the operation of the plant, it is necessary to conduct such studies to ensure system's stability and robustness. The robustness of a power system is measured by the ability of the system to operate in a state of equilibrium under normal and perturbed conditions. Power system stability deals with the study of power system's behaviour under conditions such as sudden changes in load or short circuits on buses or branches. The first section of this report will elaborate on the introductory part, which consists of the brief description on the project, the scope of work and also the main activities that the author has participated. The second part of the report will cover the details of the literature review that the author has undergone. The first study being carried out is the process requirements, which encompass mechanical principles of the GDC system that is very important in designing Electrical Load Analysis (ELA). ELA is then evaluated to calculate maximum demand and peak load. Equipment sizing, power flow study using Newton-Raphson method and short circuit study using Per Unit method based on comprehensive study has also been conducted. The third section will focus on the methodology that has been taken by the author throughout her final year period in UTP. Consequently, this section will highlight procedures and tools that have been utilized in SKM® Power Tools [4]. SKM® Power Tools [4] have been extensively used in industry as it usually has the simplest solution for most cases. The aim of this project is to understand how the system works by creating a software simulation that represents electrical power utilization. Prior to this, there is a need in understanding an electrical system response with presence of a disturbance and interruption. This next slot represents results and discussion that has been covered especially on short circuit and load flow studies. The main intention is to develop a model for load flow and short circuit studies to validate the accuracybased on the relevant data obtained from the plant. The last section will outline some recommendations and will represent as conclusion of the report. This chapter is focusing on the relevancy of this study and the achievement of this project according to the objective and mil

Item Type: Final Year Project
Academic Subject : Academic Department - Electrical And Electronics - Pervasisve Systems - Digital Electronics - Test and Reliablity
Subject: T Technology > TK Electrical engineering. Electronics Nuclear engineering
Divisions: Engineering > Electrical and Electronic
Depositing User: Users 2053 not found.
Date Deposited: 30 Sep 2013 16:55
Last Modified: 25 Jan 2017 09:46
URI: http://utpedia.utp.edu.my/id/eprint/7920

Actions (login required)

View Item View Item

Document Downloads

More statistics for this item...