Carbon Dioxide Dry Reforming over Molybdenum Oxide Supported Nickel-Cerium Catalyst To Produce Synthesis Gas

A/L M. Elanjaran, Yuwerajen Mohan (2016) Carbon Dioxide Dry Reforming over Molybdenum Oxide Supported Nickel-Cerium Catalyst To Produce Synthesis Gas. [Final Year Project]

[thumbnail of YUWERAJEN MOHAN_16179_DISSERTATION.pdf] PDF
YUWERAJEN MOHAN_16179_DISSERTATION.pdf
Restricted to Registered users only

Download (867kB)

Abstract

The process of carbon dioxide dry reforming to produce syngas has received a wide reception in recent times. However, one of the major problem in this process is the catalyst activity is attributed to the high thermodynamic potential towards coke formation and sintering. The most appropriate catalyst and its support needed to be selected to ensure that the supported catalysts possess high activity, selectivity, longer lifetime and thermal stability in order to give the best yield of syngas. Thus, the objective of this project is to prepare molybdenum oxide supported nickel-cerium catalyst through wet impregnation method for carbon dioxide dry reforming process to produce synthesis gas and to investigate its performance based on physiochemical characterization. The methodology for this project is divided into three parts, where the first is to prepare the needed reagent and materials, followed by preparation of the catalyst and lastly is catalyst activity test. The results are taken based on the Gas Chromatography Analysis and BET surface area analysis to discuss on the effectiveness of the catalyst on the CO2 dry reforming process

Item Type: Final Year Project
Subjects: T Technology > TP Chemical technology
Departments / MOR / COE: Engineering > Chemical
Depositing User: Mr Ahmad Suhairi Mohamed Lazim
Date Deposited: 23 Nov 2017 09:44
Last Modified: 23 Nov 2017 09:44
URI: http://utpedia.utp.edu.my/id/eprint/17793

Actions (login required)

View Item
View Item