Determination of Stress Intensity Factor for Arc-shaped Tension Specimen by Using Finite Element Analysis

Marjono, Nurulain (2008) Determination of Stress Intensity Factor for Arc-shaped Tension Specimen by Using Finite Element Analysis. [Final Year Project] (Unpublished)

[thumbnail of 2008 - Determination of stress intersity factor for ARC-Shaped tension specimen by using finite e.pdf] PDF
2008 - Determination of stress intersity factor for ARC-Shaped tension specimen by using finite e.pdf

Download (3MB)

Abstract

Fracture mechanics is a method for predicting failure of a structure containing a
crack which divided into linear elastic fracture mechanics and nonlinear fracture
mechanics. The most important parameter in fracture mechanics, Stress Intensity
Factor (SIF), K, is used to more accurately predict the stress intensity near the tip of
a crack caused by a remote load or residual stresses. Fracture Toughness, Kc is a
property which describes the ability of a material containing a crack to resist fracture
when load is applied to the material. Fracture occurs when K1 ~ Kc.
The crack tip parameter K is useful tool to calculate the crack growth up to fhllure
for different crack geometry and loading conditions. The advancement of finite
element source codes allows the crack tip parameters (SIF and stress distribution) to
be computed nearly accurate without being overly dependent on purely experimental
work which is time and cost consuming.
The aim of the present work is to investigate the SIF of Mode-I crack type specimen
used in general applications. The SIF for different loading value and varied
parameter which obtained from ANSYS software will be analyzed and compared
with the calculation method. The modeling work is carried out using Arc-shaped
Tension specimens.
In this study, the Arc-shaped Tension specimen was modeled to carry aluminum
properties, which exhibit linear-elastic behavior under stresses. This specimen was
modeled to be plane-strain and finite-width exerted with opening mode loading
(Mode-l). The ANSYS finite element software is employed to model this specimen
and obtain the value ofSIF to compare and validate through theoretical calculation.
The modeling results have exhibit proper linear-elastic behavior and stress
distribution. From the numerical data and theoretical considerations, it shown that
the Mode-l SIF are dependent of the loading applied to the specimens. All of all, the
results show that increasing the load applied, ring segment distance, crack length or
decreasing the thickness can significantly increase the SIF.

Item Type: Final Year Project
Subjects: T Technology > TJ Mechanical engineering and machinery
Departments / MOR / COE: Engineering > Mechanical
Depositing User: Users 2053 not found.
Date Deposited: 30 Sep 2013 16:22
Last Modified: 25 Jan 2017 09:44
URI: http://utpedia.utp.edu.my/id/eprint/7148

Actions (login required)

View Item
View Item