Items where Department / MOR is "Chemical" and Year is 2024
Thesis
Ahmed, Mohd Izamudin Bin Itam (2024) Experimental and Numerical Investigation On The In-Cylinder Air Flow In A Curved-Cylinder Crank-Rocker Engine. Masters thesis, Universiti Teknologi PETRONAS.
Ali, Saad (2024) Nobel Metal Nanoparticle Decorated Graphene Nanoplatelet Reinforced CU Matrix Composite for Thermal Management Of Smart Electronics. Masters thesis, Universiti Teknologi PETRONAS.
Faqih, Mochammad (2024) Prediction of Dry-Low Emission Gas Turbine Operating Range Using Hybrid-Supervised and Unsupervised Learning For Lean Blowout Fault Prevention. Masters thesis, Universiti Teknologi PETRONAS.
Hashwan, Saeed Salem Saeed Ba (2024) Development of Film Bulk Acoustic Resonator For Carbon Dioxide Gas Detection Using Functionalized Zeolite. Masters thesis, Universiti Teknologi PETRONAS.
Isa, Noor Hidayah Mohamed (2024) Multivariate Matrix Analysis For Fuzzy Linear Regression Model. Masters thesis, Universiti Teknologi PETRONAS.
Khai, Lim Wen (2024) Offshore Coxswain Competency Evaluation Model (OC2EM) to Improve Human Performance in Offshore Process Safety. Masters thesis, Universiti Teknologi PETRONAS.
LIM, HUEI YEONG (2024) Investigation of HZSM-5 supported CaO for Pyrolysis of Oil Palm Empty Fruit Bunch: Optimization, Characterizations, and Kinetic Study. Masters thesis, Universiti Teknologi PETRONAS.
Mohamednour, Abdelslam Elsir Elsiddig (2024) "Development of Statistical Correlation for Predicting Porous Membrane Surface Properties Using Bubble Formation Information". Masters thesis, Universiti Teknologi PETRONAS.
Saaid, Husainni Mohd (2024) . Masters thesis, Universiti Teknologi PETRONAS.
Salleh, Putra Ahmad Khalifa Bin Mohamed (2024) Development of A Converter For Wave Energy Conversion System Using Modified Sepic Circuit. Masters thesis, Universiti Teknologi PETRONAS.
Shafee, Farah Amira Binti Ahmad (2024) Framework Of Urban Lakes Management Under Different Environmental Conditions in Australia and Malaysia. Masters thesis, Universiti Teknologi PETRONAS.
binti Mohammad Jakeri, Mazni (2024) Adaptive Security Activity Selection Model for In-House Web Application Development in the Malaysia Public Sector. Masters thesis, Universiti Teknologi PETRONAS.
binti Mohd Johari, Siti Aminah (2024) Utilization of Dairy Waste Scum Oil for Biodiesel Production Via Microwave Heating over Lithium Modified Eggshell Catalyst. Masters thesis, Universiti Teknologi PETRONAS.
ul Hassan Qureshi, Annas (2024) Conversion of CO2-CH4 Mixture to CNTS and SYNGAS Using NI-Based Hydrotalcites. Masters thesis, Universiti Teknologi PETRONAS.
Final Year Project
ABDULLAYEV, RASHID (2024) SYNTHESIS, CHARACTERIZATION AND THERMAL DECOMPOSITION PATHWAY OF MOF@IONIC LIQUID HYBRID MATERIAL. [Final Year Project] (Submitted)
ADLINA, MARIAH NUR (2024) ASSESSMENT OF TORREFACTION PERFORMANCE USING FLARE GAS AS A SUSTAINABLE TORREFACTION MEDIUM. [Final Year Project] (Submitted)
AHMAD TARMIZI, AZRUL HAKIM (2024) HEAVY METAL REMOVAL VIA CONSTRUCTED WETLAND. [Final Year Project] (Submitted)
ARMAN, NURBATRISYIA AQILAH (2024) DEVELOPMENT OF PREDICTIVE MODEL TO PREDICT ADVERSE EFFECT ON EMOLLIENT SAFETY. [Final Year Project] (Submitted)
Abd Hisham, Aiman Shafiq (2024) In-situ functionalized activated carbon for CO2 adsorption. [Final Year Project] (Submitted)
Abdul Hisham, Amirul Aiman Haqeem (2024) Adsorption of microplastics from aqueous solutions by modified magnetic biochar adsorbents. [Final Year Project] (Submitted)
Abdul Malek, Muhammad Syu'aib (2024) Optimization of Liquified Petroleum Gas Treating Unit. [Final Year Project] (Submitted)
Abdullah, Ahmad 'Iefwatfaaris (2024) Optimizing mother wavelet and decomposition level selection for enhanced fault detection. [Final Year Project] (Submitted)
Abdullah, Azalia (2024) Sonodegradation of micro-pollutants in aqueous solution. [Final Year Project] (Submitted)
Abdullah, Nurantashah (2024) Amino acid based ionic liquids for co2 capture and conversion. [Final Year Project] (Submitted)
Ag Abu Bakar, Ag Mohd Izzuddin (2024) A Study of the Carbon Credit Framework in Malaysia's Petroleum Refineries/Petrochemical Industry. [Final Year Project] (Submitted)
Ahmad Khairuddin, Ahmad Danial Hakim (2024) Extraction of Sugar Alcohols from Fermentation Broth as Sustainable Sweetener, Stabilizer, Surfactant and Humectant. [Final Year Project] (Submitted)
Ahmad Shafie, Mohamad Hafiz Fahmi (2024) Synthesis of cyclic carbonate from carbon dioxide gas for CO2 utilization. [Final Year Project] (Submitted)
Alias, Ahmad Fadhli (2024) Synthesis and Characterization of Zeolitic Imidazole Framework decorated graphene oxide for room temperature hydrogen storage. [Final Year Project] (Submitted)
Arivanandan, Suvan (2024) Mechanical and thermal properties effect on glycerol-pha treated of banana peel fibers composite films. [Final Year Project] (Submitted)
Ashraf Mukhlis, Rasyiqah Hanani (2024) Adsorption behaviour of methane onto non-carbonaceous adsorbent into microporous mixed matrix membrane (MMM). [Final Year Project] (Submitted)
Ayub, Aelieya Shahira (2024) Safety Analysis for Early Integration into Automated Engineering Workflows. [Final Year Project] (Submitted)
Azaman, Muhammad Aiman Ikmal (2024) Synthesis, Characterization and Thermal Decomposition Pathway of MOF@Ionic Liquid Hybrid Material. [Final Year Project] (Submitted)
Azhar, Nabilah Husna (2024) Modeling the effect of process parameters on CO2 methanation using machine learning algorithms. [Final Year Project] (Submitted)
Azizan, Mohamad Zhafran Hafiz (2024) Process and energy efficiency based study optimisation for upstream processes. [Final Year Project] (Submitted)
Azman, Muhammad Aiman Hakim (2024) Preparation & Evaluation of Graphene Oxide from Lignin biomass as Potential Supercapacitor. [Final Year Project] (Submitted)
Azmi, Adriana Nuralia (2024) Study effect of Activating Agents towards Production of Rubber-Seed Shell Activated Carbon for Removal of Oil, Grease and Chemicals Spillage. [Final Year Project] (Submitted)
Bong, Darius Qi Xuan (2024) Gas Hydrate formation using green solvent. [Final Year Project] (Submitted)
Burhanuddin, Nor Syahirah (2024) Development of inherently safer design assessment framework using phenomena incident ranking table. [Final Year Project] (Submitted)
CHANG, HARRIS CHING LI (2024) INVESTIGATING OILY SLUDGE SEPARATION TECHNIQUE. [Final Year Project] (Submitted)
Chai, Joey Li Xing (2024) Development of Adsorbent for CH4 Capture. [Final Year Project] (Submitted)
Chandrasehgaran, Neshwign (2024) Solar Microwave-Assisted Synthesis of Modified Alkaline Catalysts for Biofuel Applications. [Final Year Project] (Submitted)
Chee, Adam Tze Loong (2024) Evaluation of Carbon Capture Potential of Flue Gas from Cement Industry. [Final Year Project] (Submitted)
Chong, Jia Yi (2024) Modeling and simulation of ammonia decomposition reactor. [Final Year Project] (Submitted)
Chong, Kenneth Yih Haur (2024) Parametric study of H2 Production from organic waste. [Final Year Project] (Submitted)
Chung, Kelvin Jun Ket (2024) Predictive modeling of hydrogen production from methanol and water using photocatalytic processes. [Final Year Project] (Submitted)
Foo, Jia Wen (2024) Delignification of oil palm empty fruit bunches using deep eutectic solvent and valorization into bioethanol. [Final Year Project] (Submitted)
Ghazali, Nuraina Natasha (2024) Optimization of hydrogen-rich production from methane using Ir-modified Ni-based catalysts. [Final Year Project] (Submitted)
HUAI CI, PHOEBE GONG (2024) OPTIMIZATION OF PROCESS PARAMETERS FOR HYBRID FE3O4/TIO2 NANOPARTICLES:BIOAUGMENTATION PROCESS FOR OILY WASTEWATER. [Final Year Project] (Submitted)
Halmy Azam, Putri Nur 'Aisyah (2024) Study of greenhouse gas emission from flaring in oil and gas industry. [Final Year Project] (Submitted)
Hanafi, Aiman Hanif (2024) Novel crosslinker for carboxylated nitrile rubber. [Final Year Project] (Submitted)
Harudin, Mohammad Zhaffar (2024) Preliminary Techno Economic Assessment of scaled-up H2S Direct Conversion to Elemental Sulfur Using Catalytic Ionic Liquid. [Final Year Project] (Submitted)
Ho, Tze Jing (2024) Synthesis of carbon-based catalyst support from rubber waste. [Final Year Project] (Submitted)
Humaidi, Rabbiatul Adawiyah (2024) Effect of winterization and plant phenolic-additives on the cold-flow properties and oxidative stability of biodiesel. [Final Year Project] (Submitted)
Ishak, Nur Irdina (2024) Development and characterization of zeolite adsorbent for direct air capture. [Final Year Project] (Submitted)
Ismail, Nurul Izni (2024) Automatic Solvent Composition Determination for Acid Gas Removal Unit Using Artificial Intelligence. [Final Year Project] (Submitted)
JAMIL, IBRAHIM MUHAMMAD (2024) INNOVATIVE SLUDGE TREATMENT WHICH FORMS IN CRUDE OIL TANKS BY HEATING AND CHEMICAL DOSING. [Final Year Project] (Submitted)
JOHNSON, TIMOTHEOUS (2024) EFFECT OF HYDROGEN SULFIDE ON THE OVERALL ECONOMIC POTENTIAL FOR OFFSHORE CO2-NATURAL GAS SEPARATION: PROCESS SIMULATION STUDY. [Final Year Project] (Unpublished)
Jack, Tiffany Trixie Anak (2024) Choline Chloride–Oxalic Acid-Impregnated Resins for Separation of Cerium/Lanthanum/Neodymium in Sulfate Media Solution via Ion Exchange Setup. [Final Year Project] (Submitted)
Jintony, Micah Simanil (2024) Integration of safety instrumented system with automated HAZOP analysis. [Final Year Project] (Submitted)
Jusoh, Alia Najiha (2024) Geopolymer - liquid natural rubber adsorbent as cold-bonded lightweight aggregates for efficient dye removal. [Final Year Project] (Submitted)
K Gopala Krishnan, Thivyalakshmi (2024) Process simulation of adsorption process in gas separation. [Final Year Project] (Submitted)
KARIMOV, NAIL (2024) SYNTHESIS AND THEORETICAL INSIGHT ON THE INTERACTION BETWEEN UIO-67 AND IONIC LIQUID. [Final Year Project] (Submitted)
KHAIRUL EMRAN, HARITH ILHAM (2024) DEVELOPMENT FRAMEWORK FOR CARBON EMISSION (SCOPE 1 AND SCOPE 2) FROM WASTE MATERIAL RECYCLING PROCESSES. [Final Year Project] (Submitted)
Kamarulzaman, Kamalina (2024) Process Simulation and Techno-Economic-Environment Assessment of Cryogenic Process in Industrial Application. [Final Year Project] (Submitted)
Khairul Anuar, Nur Khairina (2024) Production of silver nanoparticles from macroalgae (seaweed) for potential photocatalytic dye removal. [Final Year Project] (Submitted)
Kong, Chi Chai (2024) Green solvent delignification of durian seed wastes for gum-based food coating. [Final Year Project] (Submitted)
Kong, Victor Wei Jing (2024) Study on the potential of microalgae cultivation for electricity and lipid production. [Final Year Project] (Submitted)
Lau, Cindy Jen Ding (2024) Molecular Simulation of Amino Acid Ionic Liquids Decorated Silica/Polyimide Mixed Matrix Membrane for CO2 Removal from CH4. [Final Year Project] (Submitted)
Lee, Emily Min Xuan (2024) Optimization using Particle Swarm Optimization (PSO) Algorithm with Python language. [Final Year Project] (Submitted)
Liew, Lih Xuan (2024) Development of Bentonite Composite Adsorption for Heavy Metal Removal. [Final Year Project] (Submitted)
Lim, Xin Ying (2024) Introduction of ethanol ammonium butyrate [EtOHA][BA] Ionic Liquid into rubber-seed shell based activated carbon for high CO2 removal. [Final Year Project] (Submitted)
Low, Yi Xun (2024) Valorization of Anaerobic Digestion Nutrient-Rich Effluents by Progressive Freezing. [Final Year Project] (Submitted)
MANHIQUE, ECKSON (2024) FEASIBILITY STUDY OF RECYCLING SYSTEM DESIGN FOR EO PRODUCTION FOR ENHANCED SELECTIVITY. [Final Year Project] (Submitted)
MASZELAN, MUHAMMAD ADZMIL (2024) OPTIMIZATION OF GLYCERIN PURIFICATION FOR HIGH QUALITY HAIR CARE PRODUCT. [Final Year Project] (Submitted)
MIGUEL, RUI (2024) MODELLING OF LIFE CYCLE ASSESSMENT FOR HYBRID CULTIVATION AND HARVESTING SYSTEMS OF MICROALGAE TO BIOFUELS. [Final Year Project] (Submitted)
MOHAMAD FEZAR, MUHAMMAD NAQIYUDDIN (2024) HYDROGEN PRODUCTION FROM PLASTIC WASTE. [Final Year Project] (Submitted)
MOHAMAD NAS, MUNNA FARRA SOFEA (2024) GAS HYDRATE BASED DESALINATION. [Final Year Project] (Submitted)
MOHAMAD REDZUAN, NURUL FARAH NAZWA (2024) PURIFICATION OF RESIDUAL GLYCEROL RECOVERED FROM BIODIESEL PRODUCTION. [Final Year Project] (Submitted)
MOHD ARIS, NURUL JANNATTI MAISYARAH (2024) LIFE CYCLE ASSESSMENT OF BIOLUBRICANTS PRODUCTION FROM UCO AND PALM-BASED FEEDSTOCK. [Final Year Project] (Submitted)
MOHD NAZRIN, NUR ARIFAH (2024) DEVELOPMENT OF CRADLE TO GRAVE LIFE CYCLE ASSESSMENT (LCA) FOR SUSTAINABLE AGRICULTURE PLANTING. [Final Year Project] (Submitted)
MOHD NIZAM, NURUL IZZAH (2024) LA AND Y CRYSTALIZATION BY USING PHYTOCHEMICAL BASED REDUCTION AGENT. [Final Year Project] (Submitted)
MOORTHY, JAYA SATHIVELLAN (2024) STUDY OF DYE REMOVAL VIA RADIATION TECHNOLOGY. [Final Year Project] (Submitted)
MUHAMAD SABIR, HAZIQAH AUNI (2024) DETERMINATION ON EFFECT OF ENZYMATIC HYDROLYSIS AND FERMENTATION CONDITION IN PHA PRODUCTION. [Final Year Project] (Submitted)
MURTHY, SHARVINA (2024) MULTIPHYSICS MODELLING OF ALKALINE WATER ELECTROLYSIS FOR A POWER-TO-HYDROGEN PRODUCTION. [Final Year Project] (Submitted)
Mansor, Muhammad Al- Imran (2024) Electrochemical-Assisted recovery of neodymium and dysprosium from end-of-use Magnets. [Final Year Project] (Submitted)
Masdi, Danial Aiman (2024) Kinetic and thermodynamic evaluation of Methylene blue adsorption using activated carbon/CNT/hydrogen titanate nanotubes (HTNT) composite. [Final Year Project] (Submitted)
Mat Said, Nurul Sa'eidah (2024) Mathematical modelling of multi-component gas separation process via membranes. [Final Year Project] (Submitted)
Mat Sarib, Nor Sofia Afifah (2024) Thermal modelling analysis of lithium ion battery. [Final Year Project] (Submitted)
May, Leesa Welson (2024) Evaluation of Scope 1 and Scope 2 emissions for biorefinery-based production of paper pulping industry via life cycle analysis. [Final Year Project] (Submitted)
Md Romzi, Mohamad Akil Najmi (2024) Comparison of Simultaneous/Separated Hydrolysis & Fermentation processes using enzyme and dry yeast for optimization of bioethanol production from oil palm empty fruit bunch. [Final Year Project] (Submitted)
Misran, Nurul Asyikin (2024) Production of Biodiesel from Waste Cooking Oil using Calcium doped in Activated Carbon support. [Final Year Project] (Submitted)
Mohamad Sukri, Aida Maisarah (2024) Agriculture waste for dye removal. [Final Year Project] (Submitted)
Mohamad Tharmizi, Thaza Amsyar Izzati (2024) Quantitative Risk Assessment at Hydrogen Processing Facility. [Final Year Project] (Submitted)
Mohamad Yusof, Nur Atiqah Syazni (2024) Potential of zeolite adsorbents with hierarchical structures for gas separation. [Final Year Project] (Submitted)
Mohamad Zaidi, Mohamad Danial (2024) Molecular architecture of GOF for CO2 adsorption. [Final Year Project] (Submitted)
Mohammed Hanafi, Nur Syifaa Nabihah (2024) Study of PHA from biobased (ananas) and synthetic plastic wastes. [Final Year Project] (Submitted)
Mohd Asmawi, Nur Izzati Fikriyah (2024) Study of wound dressing properties made of kenaf cellulose. [Final Year Project] (Submitted)
Mohd Fakhrurrozie, Nur Athirah Munirah (2024) Multi objective optimization of CO2 utilization process. [Final Year Project] (Submitted)
Mohd Fauzi, Nur Aminah Solehah (2024) Effect of Hydrate on Corrosion Formation in Oil and Gas Pipeline. [Final Year Project] (Submitted)
Mohd Fuzi, Nurin Faqihah (2024) Consequence study of accident scenarios for liquid hydrogen release. [Final Year Project] (Submitted)
Mohd Halmy, Muhammad Aidan (2024) Energy-water-carbon nexus study for optimal design of integrated energy-water system using Automated Targeting Modeling. [Final Year Project] (Submitted)
Mohd Nasir, Munirah Nurfatihah (2024) Optimization of Alkaline Electrolysis System for Hydrogen Production: A Simulation Study. [Final Year Project] (Submitted)
Mohd Pauzi, Muhammad Iman Aiman (2024) Establishing a GHG/Carbon Risk Matrix for Industry Climate Risk Management. [Final Year Project] (Submitted)
Mohd Suhaini, Nur Sara Safiah (2024) Production of Biodiesel from Waste Cooking Oil using Microwave Irradiation and Sulphonated Iron Catalyst with Activated Carbon Support. [Final Year Project] (Submitted)
Mohd Yusof, Amir Yusri (2024) Biomass-based porous carbon synthesis via a hydrothermal carbonization & activation process. [Final Year Project] (Submitted)
Mohd Zaib, Nur Athirah (2024) Amine-Impregnated of Silica Nanocapsules Adsorbent for CO2 Capture. [Final Year Project] (Submitted)
Mohd Zaid, Muhammad Hasif (2024) Automated Solvent Component Determination for Acid Gas Removal Unit Using Artificial Intelligence. [Final Year Project] (Submitted)
Muhd Najib, Asymal Hayati (2024) Evaluation of storage technologies for hybrid power systems via Automated Targeting Modeling. [Final Year Project] (Submitted)
Murugesu, Muvendran.N (2024) Screening and design biocompatible and biodegradable ionic liquids using COSMO-RS for food industries. [Final Year Project] (Submitted)
NOOR IZIR, MUHAMMAD TAUFIQ HIDAYAT (2024) SYNGAS PRODUCTION VIA BI-REFORMING OF METHANE. [Final Year Project] (Submitted)
Naoudzmin, Nashrie Izuwan (2024) Development of hazard prediction method health exposure to nanomaterials. [Final Year Project] (Submitted)
Ng, Agnes Xin Hui (2024) Influence of Active Metal on Alumina Supported Catalyst on Methanol Selectivity & Yield in CO2 Hydrogenation Application. [Final Year Project] (Submitted)
Ngu, Chii Ong (2024) Development of UV-GOF for CO2 Adsorption. [Final Year Project] (Submitted)
Nik Salehuddin, Nik Abdul Azeem (2024) To predict the mixed gas adsorption isotherms based on single-component adsorption isotherms using IAST. [Final Year Project] (Submitted)
Noor Affandy, Sarah Farina (2024) Fabrication of SPEEK composited with Silica-modified IL for H2 production via proton exchange membrane water electrolysis. [Final Year Project] (Submitted)
Nurul Azmi, Muhammad Rasyid (2024) Experimental investigation of the minimum auto-ignition temperature of selected dust. [Final Year Project] (Submitted)
Nyipa, Alexson De Anak (2024) LiDAR Corrosion Data Rendering and Classification Using Artificial Intelligence. [Final Year Project] (Submitted)
Othman, Ahmad Harith (2024) Hotspot Growth Prediction for Photovoltaic Panel of Large Scale Solar Farm using Artificial Intelligence. [Final Year Project] (Submitted)
POSA, MUHAMMAD IQMALUDDIN (2024) OPTIMISATION OF CATALYTIC REFORMING UNIT (CRU-1) AND THE PROCESS UNITS INVOLVED. [Final Year Project] (Submitted)
Parvinder Singh, Jasleender Kaur (2024) Adsorption behaviour of methane onto carbonaceous adsorbent into microporous polymers. [Final Year Project] (Submitted)
Pathooraman, Aqilah (2024) Thermodynamic properties of freeze crystallization of high-salt wastewater. [Final Year Project] (Submitted)
Pelembe, Edson Joao (2024) Development of Sustainability Quantification Assessment for the Natural Rubber Industry. [Final Year Project] (Submitted)
Poh, Ching Hong (2024) H2 Production Enhancement Using ZnO/BiVO4 and Carbon Quantum Dots. [Final Year Project] (Submitted)
Puteri, Auni Maisarah (2024) Study of alcohol components from ananas via enzymatic process. [Final Year Project] (Submitted)
Rahim, Nur Farishah Ainna (2024) Metal organic framework as methane adsorbent. [Final Year Project] (Submitted)
Ravindran, Danesh (2024) Study And Development of Minimum Ignition Temperature Predictive Tool for Combustible Dust Using Machine Learning Application. [Final Year Project] (Submitted)
Razali, Rawaida (2024) Detection of Rare Earth Elements in Solution using Raman Spectroscopy. [Final Year Project] (Submitted)
Ridzwan, Muhammad Fakhrul Radzi (2024) Quantitative Risk Assessment of Waste-to-Energy Facility. [Final Year Project] (Submitted)
Ril Anuwa, Nur Aqilah (2024) Biolubricant production from organic waste via solar microwave heating. [Final Year Project] (Submitted)
Rodzi, Umi Hazirah (2024) Optimization of azo dyes removal by hybrid silica adsorbent using Response Surface Methodology (RSM). [Final Year Project] (Submitted)
Rosli, Amal Firdaus (2024) Numbering-up of microchannel reactors for biodiesel production. [Final Year Project] (Submitted)
Rou, Kek Wan (2024) Predictive modeling of biodiesel-derived glycerol valorization to value-added products using machine learning algorithms. [Final Year Project] (Submitted)
Rozali, Adibah (2024) Molecular Design of Functionalized Silica Nanocomposites in Cellulose Acetate based Mixed Matrix Membranes for CO2/CH4 Separation. [Final Year Project] (Submitted)
Rubangi, Aireen Sofea (2024) Removal of hydrogen sulfide using laterite materials. [Final Year Project] (Submitted)
Rusli, Anis Izzana (2024) Thermal properties effect on gylcerol-pha treated of banana peel fibers composite films. [Final Year Project] (Submitted)
SAIFULRIZAM, NUR FARISHA DIYANA (2024) MACHINE LEARNING BASED TOOLS FOR ACID GAS REMOVAL UNIT (AGRU) PROCESS MONITORING. [Final Year Project] (Submitted)
SARIF, SUHAILIZA (2024) ARTIFICIAL INTELLIGENCE (AI)-BASED CONTROL FOR A CRYOGENIC AIR SEPARATION UNIT. [Final Year Project] (Submitted)
SEIDOVA, LACHYN (2024) CO2 CAPTURE VIA GAS HYDRATE FORMATION. [Final Year Project] (Submitted)
SHAHNIZAM, EZZA FAIHARAH (2024) PHYSICAL, MECHANICAL AND THERMAL CHARACTERISTICS OF PHA-CELLULOSE FROM BIOMASS FIBERS COMPOSITE FILMS. [Final Year Project] (Submitted)
SHRI, MANJU (2024) EMISSION FACTOR DEVELOPMENT FOR PETROL, DIESEL AND BIODIESEL USED IN MALAYSIA FOR NATIONAL GREENHOUSE GAS INVENTORY. [Final Year Project] (Submitted)
Saidia, Muhammad Fitri Hakimi (2024) Quantitative Risk Assessment for Chemical Methyl Tert-Butyl Ether Process Plant. [Final Year Project] (Submitted)
Saravanan, Sashivarma (2024) Anaerobic Digestion of Chicken Manure for Generation of Circular Economy Outputs: A Life Cycle Assessment (LCA) Study. [Final Year Project] (Submitted)
Shaharom, Farzanah Hannani (2024) Predictive life cycle assessment modelling for prediction of environmental performance of sustainable transport fuels. [Final Year Project] (Submitted)
Shahrir Affandi, Arash Hadzim Haiqal (2024) Development of nanoporous polymer materials based on ionic liquid surfactants for CO2 capture and Separation. [Final Year Project] (Submitted)
Shahrol Hanizam, Naif Nafiz (2024) CO2 reforming of methane over Ni-based catalysts. [Final Year Project] (Submitted)
Shaifol Azman, Nur Shahirah (2024) Production of Biodiesel from Waste Cooking Oil using Ca/Al2O3 Catalyst. [Final Year Project] (Submitted)
Sim, Zhe Xi (2024) Ionic liquid as stable and wide electrochemical window electrolyte for supercapacitor application. [Final Year Project] (Submitted)
Siva Kumar, Rishan Kumar (2024) Study And Development of Minimum Ignition Energy Predictive Tool for Combustible Dust Using Machine Learning Application. [Final Year Project] (Submitted)
Sourendaran, Sinesh (2024) Anaerobic Digestion of Food Waste using Rice Paddy Field Soil as Inoculum: Correlation with Carbon-to-Nitrogen Ratio for Enhanced Biogas Generation. [Final Year Project] (Submitted)
Sudiman, Siti Zawiyah Syamemie (2024) Comparison of Metastable Zone Width Analysis for Glycerol Originated from Purified Oil and Unpurified Oil in Solvent-Aided Crystallization. [Final Year Project] (Submitted)
Suhaifa, Nur Intan Syahirah (2024) Accuracy and Reliability of LOPC Calculations: A Validation Study. [Final Year Project] (Submitted)
Suhairi, Muhammad Aqil (2024) Computer Based Vision for Condensate Color Determination Using Artificial Intelligence. [Final Year Project] (Submitted)
Sukri, Farah Anissa (2024) Carbon Accounting Tool for Greenhouse Gas Emission Sources in Hydrogen Production Facilities. [Final Year Project] (Submitted)
THOOY, KOK PIN (2024) MULTIPHYSICS MODELLING OF SOLID OXIDE ELECTROLYSIS FOR A POWER-TO-HYDROGEN PRODUCTION. [Final Year Project] (Submitted)
Tambaka, Jordan Maikon (2024) Development of hazard rating system for nanomaterial. [Final Year Project] (Submitted)
Teh, Kok Xiang (2024) Photoelectrochemical Water-splitting based on Ce-doped ZnO nanorods for Solar-driven Hydrogen Generation. [Final Year Project] (Submitted)
Tengku Syed Mukhriz, Tengku Sharifah Nur Sabrina (2024) Determination of Metastable Zone Width of Biodiesel in Solvent-Aided Crystallization. [Final Year Project] (Submitted)
Terry, Darren Anderson Anak (2024) Study on the electrocoagulation method for microalgae harvesting. [Final Year Project] (Submitted)
Tuan Ismail, Tuan Muhammad Isma Hafizzuddin (2024) Study of chemical components of kenaf waste biooil via pyrolysis process. [Final Year Project] (Submitted)
VINCENT, VON VANCE (2024) GAS HYDRATE MITIGATION USING GREEN SOLVENT. [Final Year Project] (Submitted)
Wan Abdul Manan, Wan Nur Alya (2024) Model based control for an industrial Air Separation Unit. [Final Year Project] (Submitted)
Wong, Eunice Sze Ting (2024) Development and characterization of mesoporous silica adsorbent for CO2/CH4 permeation and separation. [Final Year Project] (Submitted)
Yusni, Nur Ain Aina (2024) Synthesis and Theoretical Insight On The Interaction Between UiO-67 and Ionic Liquid. [Final Year Project] (Submitted)
Zaharin, Muhammad Firdaus (2024) Palletizing geopolymer - liquid natural rubber adsorbent for wastewater treatment. [Final Year Project] (Submitted)
Zahuren, Muhammad Zahran (2024) Sonodegradation of micro-pollutants in presence of particulate materials. [Final Year Project] (Submitted)
Zaini, Muhammad Fadlan (2024) Benzene, toulene and xylene (BTX) extraction from waste tyre pyrolysis oil. [Final Year Project] (Submitted)
Zainuzi, Adlina Zafirah (2024) Combined Pinch-Exergy analysis for optimal LNG cold energy recovery. [Final Year Project] (Submitted)
Zulkifli, Nur Adila Nabiha (2024) Gas dispersion modelling for ethylene leak. [Final Year Project] (Submitted)
Zulkornain, Bilal (2024) Physical characteristics of pha cellulose from banana peel fibers composite films. [Final Year Project] (Submitted)
Past Year Examination Question
AJAK, ACHOL AGUEK TENGTENG (2024) SOLVENT-AIDED CRYSTALLIZATION FOR PURIFICATION OF BIODIESEL SYNTHESIZED FROM COCONUT OIL. [Past Year Examination Question] (Submitted)