Items where Department / MOR is "Petroleum Engineering" and Year is 2024

A

AFOLABI, FUNSHO AYOBAMI (2024) CHEMICAL ENHANCED OIL RECOVERY APPLICATION OF NOVEL SYNTHESIZED CELLULOSE-BASED POLYMERIC SURFACTANTS. Doctoral thesis, Universiti Teknologi PETRONAS.

ANUAR, ASTRIYANA (2024) IMPROVEMENT ON WAX MODELLING METHODOLOGIES FOR MICROCRYSTALLINE WAX HYDROCARBON MIXTURES. Masters thesis, Universiti Teknologi PETRONAS.

Abd Rahman, Muhammad Haiqal Danial (2024) Techno-Economic Study for Gas Flaring system; Towards Zero Flaring. [Final Year Project] (Submitted)

Abdul Manan, Nur Ainin Sofiya (2024) Investigation of sand consolidation efficiency of epoxy resin assisted by permeability enhancing additives. [Final Year Project] (Submitted)

Abdullah Abduljabbar, Mohammed Salih Ahmed (2024) Improving Erosion Modeling for Stand-Alone Screens Under Different Fluids and Particles Specifications Using CFD Simulations. Doctoral thesis, Universiti Teknologi PETRONAS.

Adedeji, Zainab Oyinda (2024) . Masters thesis, Universiti Teknologi PETRONAS.

Airul Asni, Farra Diba (2024) SCREENING OF IONIC LIQUIDS FOR CO2 CAPTURE. [Final Year Project] (Submitted)

Ajang, Isaac Shouki Aboch (2024) A Comprehensive Investigation on the Adsorptive Characteristics of a Commercial Polymeric Surfactant in Sandstone. [Final Year Project] (Submitted)

Amir, Ku Amirul Asyraf Bin Ku (2024) An Integrated Feature Selection Approach For Remaining Useful Life Prediction Of Industrial Machinery. Masters thesis, Universiti Teknologi PETRONAS.

Arain, Aftab Hussain (2024) "Development and Performance Evaluation of Biodiesel-Based Drilling Fluid using Calophyllum Inophyllum Oil for Improved Drilling in Shale Formation". Doctoral thesis, Universiti Teknologi PETRONAS.

Azri Farid, Nurrin Batrisyia (2024) Plugging performance Evaluation of Green Pickering Emulsion for Conformance Control. [Final Year Project] (Submitted)

B

Binti Kithar, Iffah Athirah (2024) Predicting Gas Solubility Using Machine Learning Techniques. [Final Year Project] (Submitted)

C

Cabir, Cabir Ismael (2024) Crude oil / water emulsion resolution using the special solvents. [Final Year Project] (Submitted)

Chan, Mayin (2024) Effect of Silica Fume on the Properties of Class G Cement. [Final Year Project] (Submitted)

G

Gumis, Marc Isaac Kalum Anak Dineal (2024) Prediction of CO2 Injectivity Changes. [Final Year Project] (Submitted)

H

HALIM, NOR HADHIRAH (2024) DEVELOPMENT OF GUIDELINES FOR THE SELECTION OF DEMULSIFIER BY INCORPORATING PROPERTIES OF CRUDE AND DEMULSIFIER. Masters thesis, Universiti Teknologi PETRONAS.

Husin, Muhammad Ibrahim Hakimi (2024) Investigation of Single-Component Epoxy Resin System for Sand Consolidation. [Final Year Project] (Submitted)

I

IFEROBIA, CAJETAN CHIMEZIE (2024) GEOMECHANICS OF SHALE-FLUID INTERACTION AND APPLICATION TO SHALE GAS RESERVOIR BRITTLENESS-FRACABILITY ANALYSIS. Doctoral thesis, Universiti Teknologi PETRONAS.

Ismadi, Syasya Afiqah (2024) Characterization of shale formation for CO2 potential storage. [Final Year Project] (Submitted)

J

Jaidin, Sahrman (2024) Effect of superplasticer in the properties of oil well cementing. [Final Year Project] (Submitted)

Justin, Weallfearnius (2024) Effect of Monoetheleneamine (MEA) concentration and temperature on material corrosion during CO2 capture: electrochemical and weight loss analysis. [Final Year Project] (Submitted)

K

Kamarozaman, Ahmad Aqil Awwab (2024) Investigation of Biopolymer Assisted Enzyme Induced Calcium Carbonate Precipitation (EICP) for Sand Consolidation Treatment. [Final Year Project] (Submitted)

Kamel, Muhamad Aizuddin Bin Mohd (2024) The Development an Algorithm Of Magnitudes Changes Of Frequency Response Analysis For Transformer. Masters thesis, Universiti Teknologi PETRONAS.

Kim, Qian Tan (2024) Carbon dioxide storage capacity estimation for depleted oil reservoir. [Final Year Project] (Submitted)

Kumar, Abhishek (2024) "Physics Informed Deep Learning for Power-Law Drilling Fluid Flow in Concentric and Eccentric Annulus ". Doctoral thesis, Universiti Teknologi PETRONAS.

L

Loganathan, Kumarendren (2024) Stability and viscoelastic behavior of a Polyacrylamide Polymer with the crosslinker: Experimental Investigation. [Final Year Project] (Submitted)

M

Mat Rozaidi, Noor Ain Natashah (2024) Toxicity screening of Green Pickering Emulsions to be utilized for production optimization. [Final Year Project] (Submitted)

Md Saidin, Muhammad Firdaus (2024) Surface morphology analysis of the effect of alkanolamines concentration on piping corrosion during CO2 capture. [Final Year Project] (Submitted)

Mhamod, Nur Aqelah (2024) Determination of Inkjet Carbon as an Emulsifier through Stability Screening and Rheological Analysis. [Final Year Project] (Submitted)

N

Noor Akmar Shah, Muhammad Bazly (2024) Characterization of shale formation for CO2 potential storage. [Final Year Project] (Submitted)

R

Razali, Nurezzatul Husnie (2024) Effect of Metakaolin on the properties of Class G cement. [Final Year Project] (Submitted)

Rosyarhan, Eliana Farisha (2024) Investigation on the effect of Induced Acidic Conditions on CO2 adsorption on Shale cap rock -Implication for geological carbon storage (GCS). [Final Year Project] (Submitted)

S

Shafie, Puteri Nur Fakhira Umairah (2024) Investigation of Enzyme Induced Calcium Carbonate Precipitation (EICP) on Different Types of Rocks. [Final Year Project] (Submitted)

Surpina, Nazliah (2024) Paraffin precipitate inhibition using eco-friendly inhibitors. [Final Year Project] (Submitted)

T

Teh, Wen Kang (2024) Influence of pH and Divalent Cation Effects on CO2 Hydrate Stability in Brine Systems. [Final Year Project] (Submitted)

W

Wan Azni, Wan Muhammad Amir Haziq (2024) Inhibitor for Salt Precipitation for CO2 injection efficiency. [Final Year Project] (Submitted)

Z

Zawawi, Muhammad Zahin (2024) System identification-based models for for quick performance evaluation of a gas flooding reservoir. [Final Year Project] (Submitted)