Items where Department / MOR is "Mechanical" and Year is 2012

Ahmad, Safinah (2012) Modal Analysis of Rotary Piston Blower. [Final Year Project] (Unpublished)

MD YUDIN, AHMAD SHUKRIE (2012) STUDIES ON THE RESIDENCE TIME DISTRIBUTION OF SOLIDS IN A SWIRLING FLUIDIZED BED. Masters thesis, UNIVERSITI TEKNOLOGI PETRONAS.

Ramli, Mohd Safwan Izzudin (2012) Line Modeling of C02 Corrosion of Offshore Pipeline. [Final Year Project] (Unpublished)

.

., Brilianto Brioann Boni (2012) REMAINING CREEP LIFE PREDICTION OF USED GAS TURBINE BLADES. [Final Year Project] (Unpublished)

., OBAKENG LEVY SIKO (2012) BENDING STRESS ANALYSIS OF HELICAL GEARS USING FINITE ELEMENT METHOD. [Final Year Project] (Unpublished)

., S. FAUZAN ASHRI (2012) THE EFFECTIVENESS OF MULTI-STAGED SWIRLING FLUIDIZED BED. [Final Year Project] (Unpublished)

., Syed Haider Ali Shah (2012) EFFECT OF CONDENSER CONDITIONS ON PERFORMANCE OF A STEAM POWER PLANT. [Final Year Project] (Unpublished)

., Vyner V Raya (2012) Image Reconstruction and Resolution via Electrical Impedance Tomography. [Final Year Project] (Unpublished)

., Vyner V Raya (2012) Image Reconstruction and Resolution via Electrical Impedance Tomography. [Final Year Project] (Unpublished)

A

A Rahman, Hamizah (2012) Design of an Explosion Vessel for Study of Flame Propagations. [Final Year Project]

A/L RAMAHLINGAM, TIRUSELVAM (2012) STUDIES ON A DOUBLE TUBE HEAT EXCHANGER WITH NOVEL SURFACE ENHANCEMENT FOR SINGLE PHASE AND MULTI-PHASE HEAT TRANSFER. PhD. thesis, Universiti Teknologi PETRONAS.

ABD RAHMAN, MOHAMAD ZULHAKIM (2012) TENSILE AND FLEXURAL PROPERTIES OF RECYCLED PP/KENAF/PET HYBRID COMPOSITES. [Final Year Project] (Unpublished)

ABDUL AZIZ, MOHAMMAD IQBAL (2012) Rotary Friction Welding of Copper Rods by Utilizing Lathe Machine. [Final Year Project] (Unpublished)

ABDUL GHAFFAR, AMIR FARID (2012) PALM OIL FIBER COMPOSITE LEAF SPRING FOR HEAVY VEHICLE. [Final Year Project] (Unpublished)

ABDUL RAHMAN, KHAIRIN EZZATY (2012) EXPERIMENTAL AND SIMULATION STUDY ON THE EFFECTS OF TUBE COIL PLATES ON THE PERFORMANCE OF STEAM PACKAGED BOILER. [Final Year Project] (Unpublished)

ABDUL SAMAD, MUHAMMED FARHAN (2012) TRIBOLOGICAL PERFORMANCE OF ADDITIVES IN COMMERCIAL LUBRICANTS. [Final Year Project] (Unpublished)

AHMAD ZUHAIRIE BIN YAHYA, AHMAD (2012) EFFECTS OF FIBER LENGTH ON FIRE PERFORMANCE OF INTUMESCENT FIRE RETARDANT COATING. [Final Year Project] (Unpublished)

AIMAN SYAFIQ BIN ZAKARIA, AIMAN SYAFIQ (2012) FATIGUE LITE PREDICTION METHODS IN AN ENGINE MATERIAL. [Final Year Project] (Unpublished)

AZFAR BIN JASNI, AZFAR (2012) Study on Effect of 5 wt. % of Coconut Fiber Reinforcement on Tensile and Flexural Properties of Epoxy Based Composites. [Final Year Project] (Unpublished)

Ab Hamid, Abdul Halim (2012) DEVELOPMENT OF INTUMESCENT FIRE RETARDANT COATING FOR PROTECTION OF WOODS. [Final Year Project] (Unpublished)

Abd Rahim, Muhamad Hanafi (2012) Aerodynamic Study of Delfy Hovering Flapping Wing. [Final Year Project] (Unpublished)

Abd Rashid, Mumtaz Hayati (2012) Design of Molten Salt Thermal Storage Tank. [Final Year Project] (Unpublished)

Abd Razak, Nurul Fatimah (2012) PRELIMINARY STUDY FOR METHANE GENERATION OF FELCRA NASARUDDIN USING ANAEROBIC DIGESTION. [Final Year Project] (Unpublished)

Abdul Hafeez Bin Abdul Shukur, Abdul Hafeez (2012) A Study of Stability and Vibration of the Drill String. [Final Year Project] (Unpublished)

Abdul Rahman, Muhammad Izzat (2012) Design and Fabrication of Brushless DC Motor Driven Personal Electric Vehicle (PEV). [Final Year Project] (Unpublished)

Abu Bakar, Khairunnisa (2012) Finite Element Analysis of Violin Bridge. [Final Year Project] (Unpublished)

Ahmad Husaini Bin Bahaman, Ahmad Husaini (2012) Parametric Analysis of Flat Plate Solar Collector For Performance Evaluation. [Final Year Project] (Unpublished)

Ahmad Kamil, Muhammad Akmalhazwan (2012) MODELING INTERGRANULAR FRACTURE AT ELEVATED TEMPERATURE. [Final Year Project] (Unpublished)

Ahmad Sohimi, Amierul Fahmi (2012) Tensile and Flexural Properties of HDPE/PET/Kenaf Hybrid Composites. [Final Year Project] (Unpublished)

Ahmad Syafwan Bin Mohd Saidi, Ahmad Syafwan (2012) Thermal Management of Battery for Proton Green Mobility Car. [Final Year Project] (Unpublished)

Aiwad Bin Zaidan, Aiwad (2012) Robotic Rehabilitation System In Malaysia. [Final Year Project] (Unpublished)

Aliff Amirul Hamzah Bin Adenan, Aliff Amirul Hamzah (2012) Reverse Engineering for Analysis and Design Improvement of Ball Valve Seat. [Final Year Project] (Unpublished)

Anggara Warsita, Anggara Warsita (2012) A Study on Extension of Useful Annular Area of a Swirling Fluidized Bed Distributor. [Final Year Project] (Unpublished)

Anthony Aga, Erizeanne (2012) Design and Development of Underwater Glider. [Final Year Project] (Unpublished)

Arif Zaki Bin Ariffin, Arif Zaki (2012) Development of Heat Exchangers Design Tool. [Final Year Project] (Unpublished)

Azreel Zairee Bin Omar, Azreel Zairee (2012) Energy Recovery Studies For Flare Systems in Offshore Oil and Gas Facilities. [Final Year Project] (Unpublished)

B

BIN JAMAL, AJMAL FALIQ (2012) STUDY OF COMPARISON IN CORROSION RESISTANCE OF FRICTION STIR WELDING ALUMINUM ALLOY (AA6061 AND AA1100). [Final Year Project] (Unpublished)

C

Cheng Lee Chon, Cheng Lee Chon (2012) GEOMECHANICS RELIABILITY MODELING FOR DE-RISKING. [Final Year Project] (Unpublished)

Chin Swee Miin, Chin Swee Miin (2012) Investigation of Particle Motion in a Swirling Fluidized Bed using Particle Imaging Velocimetry. [Final Year Project] (Unpublished)

E

EMALISA BINTI KAMSANI, EMALISA (2012) DEVELOPMENT OF AN AUTOMATED FLOW RATE ESTIMATION METHOD. [Final Year Project] (Unpublished)

F

Faimaize Bin Ibrahim, Faimaize (2012) Effect of Drag Reducing Agent (DRA) In the Injection Well. [Final Year Project] (Unpublished)

Fariza Fansara Binti Fauzi, Fariza Fansara (2012) Study on Thermal Performance Assessment of Solar Hot Water Systems (SHWS) in Malaysia. [Final Year Project] (Unpublished)

G

GOVINDERJIT SINGH, GOVINDERJIT SINGH (2012) Study of Friction Welding on Conventionel Lathes Machine. [Final Year Project] (Unpublished)

Goo Jia Jun, Goo Jia Jun (2012) Characterization of Swirling Fluidized Bed. [Final Year Project] (Unpublished)

H

HARBINDER SINGH, ANILDAV SINGH (2012) DEVELOPMENT AND TESTING OF INTUMESCENT FIRE RETARDANT COATING ON VARIOUS STRUCTURAL GEOMETRIES. [Final Year Project] (Unpublished)

HARBINDER SINGH, ANILDAV SINGH (2012) DEVELOPMENT AND TESTING OF INTUMESCENT FIRE RETARDANT COATING ON VARIOUS STRUCTURAL GEOMETRIES. [Final Year Project] (Unpublished)

Halim, Nor Haziyah (2012) STUDY THE EFFECTS OF SINTERING ATMOSPHERE ON CORROSION BEHAVIOR OF POWDER INJECTION MOLDING 316L STAINLESS STEEL. [Final Year Project] (Unpublished)

Haris, Sakinah (2012) Characterization of Precipitates in Steam Methane Reformer Tubes. [Final Year Project] (Unpublished)

Haron, Mohd Amin (2012) MODAL ANALYSIS OF A TENNIS RACQUET. [Final Year Project] (Unpublished)

Hashim, Mohd Zulkarnain (2012) DEVELOPMENT OF FAULT TREE ANALYSIS FOR COOLING WATER SYSTEM USING SPREADSHEET. [Final Year Project] (Unpublished)

I

IKA FARIKHA SYAZWANI BT ABD RAHMAN, IKA FARIKHA SYAZWANI (2012) DESIGN & FABRICATION OF VERTICAL TURBINE FOR RURAL MICRO HYDROELECTRIC GENERATION. [Final Year Project] (Unpublished)

Ilias, Ummu Hani (2012) Effect of Different Welding Tool Pin Shapes on Friction Stir Welding Plates Microstructure. [Final Year Project] (Unpublished)

Irfan, NoorFurqan (2012) Bending Stress Analysis for Spur Gear (2D Analysis). [Final Year Project] (Unpublished)

J

JARED SAMUEL S/O THANGGARAJ, JARED SAMUEL (2012) DESIGN OF CENTRAL SOLAR TOWER RECEIVER. [Final Year Project] (Unpublished)

JIN, JIANG PHUAH (2012) Fractional Flow Analysis for Chemical Flooding in Enhanced Oil Recovery. [Final Year Project] (Unpublished)

Joel Yeo Eng Hsien, Joel Yeo (2012) Estimation of Tire Cornering Stiffness Using Static Method. [Final Year Project] (Unpublished)

K

KAR FYE, CHAN (2012) A STUDY ON AN EVAPORATOR-CONDENSER COMBINATION FOR HUMIDITY CONTROL IN AN AIR-CONDITIONING SYSTEM. Masters thesis, Universiti Teknologi Petronas.

KON KIT LUNG, KON KIT LUNG (2012) MATERIAL FLOW STUDY DTTRING FRICTION STIR WELDING OF DISSIMILAR MATERIAL. [Final Year Project] (Unpublished)

Kan Sze Wei, Kan Sze Wei (2012) The Effect of Preferential Weld Corrosion Study in CO2 Capture Plant at PFK. [Final Year Project] (Unpublished)

Khairil Ikhwan Bin Abdul Rahman, Khairil Ikhwan (2012) Development of Diagnostic Program for Gas Compressor using Knowledge Based Management Concept. [Final Year Project] (Unpublished)

Khairul Anwar Bin Hasni, Khairul Anwar (2012) Stress Analysis of Steam-Methane Reformer Tubes. [Final Year Project] (Unpublished)

Khairul Ashraf Bin Minhat, Khairul Ashraf (2012) Effects of Drilling Induced Defects and Mechanical Properties of GFRE Composites. [Final Year Project] (Unpublished)

Khamis, Nur Syaheerah (2012) Computer Aided Design of Semi-Submersibles for Deepwater Operations. [Final Year Project] (Unpublished)

L

Lai Kok Soon, Lai Kok Soon (2012) Multiphase Flow in Naturally Fractured Reservoirs: Comparison of Matrix-Fracture Shape Factor and Transfer Function. [Final Year Project] (Unpublished)

M

MAT SHAYUTI, MUHAMMAD SHAFIQ (2012) THERMAL, WATER ABSORPTION, AND MECHANICAL PROPERTIES OF POLYPROPYLENE – GRAFT – MALEIC ANHYDRIDE COMPATIBILIZED POLYPROPYLENE / POLYCARBONATE BLENDS. Masters thesis, Universiti Teknologi PETRONAS.

MOHAMAD FAIZAL AZRI BIN AZAHARI, MOHAMAD FAIZAL AZRI (2012) Corrosion Characterization of Salvaged Subsea Pipeline. [Final Year Project] (Unpublished)

MOHD AIZAT BIN ZAINAL, MOHD AIZAT (2012) PERSONAL ELECTRIC VEHICLE PROTOTYPE DEVELOPMENT. [Final Year Project] (Unpublished)

MOHD KHAIRAN, SYAFIQ (2012) A STUDY OF AUTO-REINFORCED MAGNETIC FLYWHEEL'S PERFORMANCE. [Final Year Project] (Unpublished)

MOHD NASHIR, MOHD RIDHWAN (2012) INSITU PRODUCTION OF NANO METAL MATRIX COMPOSITE (NANO MMC’s) USING FRICTION STIR PROCESSING (FSP). [Final Year Project] (Unpublished)

MOHD RAHIM, MOHD NUZUL SYAZWAN (2012) INVESTIGATION OF PARTICLE MOTION IN A SWIRLING FLUIDIZED BED USING PARTICLE TRACKING VELOCIMETRY. [Final Year Project] (Unpublished)

MOHD RUSLAN, MOHD SYAFIQ (2012) Design Continuous Variable Transmission for Shell Eco Marathon Asia 2012 (SEM2012). [Final Year Project] (Unpublished)

MOHD SHAFRI, MOHD IZWAN SHAFIQ (2012) TENSILE AND FLEXURAL PROPERTIES OF COMMINGLED KENAF/PET REINFORCED POLYPROPYLENE HYBRID COMPOSITES. [Final Year Project] (Unpublished)

MUGILAN A/L MALAI RAJAN, MUGILAN (2012) The effect of hybrid filler loading on mechanical and physical properties of Epoxy Bio-Composite. [Final Year Project] (Unpublished)

MUHAMMAD LUQMAN MOHD NASIR, MUHAMMAD LUQMAN (2012) Development of an Effective Drying System to Improve the Fuel Quality of Poultry Waste Material Using FLUENT Simulation. [Final Year Project] (Unpublished)

Mat Ghani, Normanisah (2012) Experimental Investigation of Natural Convection from Pinned Plate Solar Absorber. [Final Year Project] (Unpublished)

Md Yusoff, Ahmad Sofwan (2012) Mechanical and Physical Properties of Titanium Alloy Ti6Al4V-2Y. [Final Year Project] (Unpublished)

Md Zuki, Mohamad Hanif Hazrin (2012) Mechanical and Physical Properties of Titanium Alloy Ti6Al4V-7Y. [Final Year Project] (Unpublished)

Mohamad Fahmi Bin Md Bekery, Mohamad Fahmi (2012) CHARACTERISATION OF INTER-LAMINAR SHEAR STRENGTH (ILSS) OF A RESIN INFUSED WIND TURBINE BLADE POLYMER COMPOSITE. [Final Year Project] (Unpublished)

Mohamad Shiham, Najwa Sofwani (2012) ANALYSIS ON PROCESS PARAMETERS OF SLS RAPID PROTOTYPING PROCESS. [Final Year Project] (Unpublished)

Mohamed Yusoof, Mohamed Zaid (2012) Finite Element Analysis on Residual Stresses Occur in Heat Affected Zone (HAZ) of the Carbon Steel Welded Pipe. [Final Year Project] (Unpublished)

Mohammad EL Hafiz bin Mushadad, Mohammad EL Hafiz (2012) Investigation into Resin Infusion Strategies in the Fabrication of GRE Composite Wind Turbine Blade. [Final Year Project] (Unpublished)

Mohammad Izzatul Akmal Bin Abdillah, Mohammad Izzatul (2012) Experimental Study on Spur Gear Vibration Characteristics under Various Loading Conditions. [Final Year Project] (Unpublished)

Mohd Amirul Bin Che Hussain, Mohd Amirul (2012) Mechanical Design and Dynamic Analysis of Pipe Crawling Robot for 6” to 10” diameter Internal Gas Pipeline Inspection. [Final Year Project] (Unpublished)

Mohd Aznan, Md Nasrun Faris (2012) Characterization of Solid Biomass Fuel Briquettes. [Final Year Project] (Unpublished)

Mohd Johari, Muhammad Syafiq (2012) Development of Reliability Model for Furnace System using Spreadsheet. [Final Year Project] (Unpublished)

Mohd Nazmi bin Mohamad Saifull Bahri, Mohd Nazmi (2012) Thermal Shrinkage and Gas Voids Formation of Waxy Crude Oil. [Final Year Project] (Unpublished)

Mohd Suhaimi, Nur Aqilah (2012) CFD Simulation of the Natural Convection of Pinned Plate Solar Absorber. [Final Year Project] (Unpublished)

Mohd Syuaib Bin Jamaludin, Mohd Syuaib (2012) Thermal Shrinkage and Gas Void Formation of Waxy Crude Oil with Additive. [Final Year Project] (Unpublished)

Mohd Zain, Mohammad Farhan (2012) Design and Analysis of a Hyperbaric Chamber. [Final Year Project] (Unpublished)

Mohd. Azlan B. Zamahari, Mohd. Azlan (2012) Design of a 3-DOF Parallel Mechanism with Shape Memory Alloy Actuators. [Final Year Project] (Unpublished)

Mokhtar, Siti Nur Farhin (2012) FRACTURE TOUGHNESS AND FATIGUE CRACK GROWTH TESTS OF FRICTION STIR WELDED PLATES. [Final Year Project] (Unpublished)

Muhamad Bakhtiar Bin Ismail, Muhamad Bakhtiar (2012) Model and Simulation of Heavy Load Carrier Mechanism. [Final Year Project] (Unpublished)

Muhamad Fadzir Bin Ab Razak, Muhamad Fadzir (2012) Numerical Investigation of Waste-Heat Driven Adsorption Desalination Cycle. [Final Year Project] (Unpublished)

Muhamad Faisal bin Ali, Muhamad Faisal bin Ali (2012) Development of Fuel Briquette from Palm Oil Mill Waste Mixed with Other Biomass Fuels. [Final Year Project] (Unpublished)

Muhamad Faris Bin Ali Osman, Muhamad Faris (2012) Mud Weight Prediction for Offshore Drilling. [Final Year Project] (Unpublished)

Muhamad Isfan Imanullah b Adnan, Muhamad Isfan I (2012) Modeling of Subsea Control Module using Agito SimulationX. [Final Year Project] (Unpublished)

Muhamad Nor Bin Azizi, Muhamad Nor (2012) Design and Construction of smoke wire apparatus for wind tunnel flow visualization. [Final Year Project] (Unpublished)

Muhammad Abduh Bin Mustapha, Muhammad Abduh (2012) Dynamics Fracture Propagation due to Cold Water Injection. [Final Year Project] (Unpublished)

Muhammad Azmeer Bin Rozman, Muhammad Azmeer (2012) Design of an Efficient Domestic Gas Oven. [Final Year Project] (Unpublished)

Muhammad Fadhil Bin Hassan Basri, Muhammad Fadhil (2012) Alternative Power Generation for Subsea Production System. [Final Year Project] (Unpublished)

Muhammad Faris Bin Che Salam, Muhammad Faris (2012) A Study on Repeatability of a Resin Infusion Strategy in the Manufacturing of Polymer Composite Wind Turbine Blade via Resin Infusion Process. [Final Year Project] (Unpublished)

Muhammad Hazwan Bin Desa, Muhammad Hazwan (2012) Design and Analysis of In-Field Liner (IFL) and IFL Pulling Head for Underwater Pipeline. [Final Year Project] (Unpublished)

Muhammad Hazwan Bin Desa, Muhammad Hazwan (2012) Design and Analysis of In-Field Liner (IFL) and IFL Pulling Head for Underwater Pipeline. [Final Year Project] (Unpublished)

Muhammad Waseem, Muhammad Waseem (2012) Characterization Of Crude Oil Emulsion. [Final Year Project] (Unpublished)

Muhammad Zahhar bin Hamizer, Muhammad (2012) Stress Analysis in Elastically Similar Complete Contacts. [Final Year Project] (Unpublished)

Muhammad Zamil bin Abdullah, Muhammad Zamil (2012) Thermal Analysis of Bovine Bone Drilling. [Final Year Project] (Unpublished)

Muhibbullah Bin Haji Salleh, Muhibbullah (2012) Investigation of Welding Parameter on Resistance Spot Welding of Stainless Steel and Mild Steel Sheet. [Final Year Project] (Unpublished)

Muhil Prakaash A/L Manickam, Muhil Prakaash (2012) A NEW TYPE OF WIND TURBINE TO SUIT THE SOLAR CHIMNEY FOR POWER PRODUCTION. [Final Year Project] (Unpublished)

N

NEW, MEI YET (2012) NUMERICAL STUDY OF CROSS FLOW FAN PERFORMANCE IN AN INDOOR AIR CONDITIONING UNIT. Masters thesis, Universiti Teknologi PETRONAS.

NGAH, MUHAMMAD HELMI (2012) Tensile and Flexural Properties of Grass/Epoxy Composites. [Final Year Project] (Unpublished)

Nadrah bt Isa, Nadrah (2012) X-Ray Amorphous Pattern Characterization of PETRONAS Petroleum Coke Product as a Potential for Advanced Carbon-Carbon Composite Material Precursors. [Final Year Project] (Unpublished)

Najwa Sofwani Mohamad Shiham., Najwa Sofwani (2012) ANALYSIS ON PROCESS PARAMETERS OF SLS RAPID PROTOTYPING PROCESS. [Final Year Project] (Unpublished)

Noor Farhane Binti Che Harun, Noor Farhane (2012) Study of Harnessing Raindrop Energy Potential in Perak, Malaysia. [Final Year Project] (Unpublished)

Nor Azlinda Azmi, Nor Azlinda (2012) Buckling Analysis of Single-walled Carbon Nanotubes (SWCNTs) using Finite Element Method. [Final Year Project] (Unpublished)

Nur Sabrina binti Md Danial, Nur Sabrina (2012) Study on Physical and Mechanical Properties of Rubber Latex Composites with SiO2 Addition. [Final Year Project] (Unpublished)

Nur Zaihasra Zahari, Nur Zaihasra Zahari (2012) TEMPERATURE DISTRIBUTION FOR PALM OIL MILL USING IR THERMAL IMAGING. [Final Year Project] (Unpublished)

Nur ‘Atikah bt Jamaludin Alias, Nur ‘Atikah (2012) Failure Analysis on Heat Exchanger Tube Bundle Leakage. [Final Year Project] (Unpublished)

Nurul Alia binti Mohd Anuar, Nurul Alia (2012) Stress Analysis of Underwater Pipeline for Irregular Seabed Topography Using CAESAR II. [Final Year Project] (Unpublished)

Nurul Fatin Syazwani Binti Azman, Nurul Fatin Syazwani (2012) Finite Element Analysis of Contra Bass Bridge. [Final Year Project] (Unpublished)

Nurul Hazwani Ahmad Shokri, Nurul Hazwani (2012) Study of Fluid-Structure Interaction (FSI) On Benfield Solution (BS) Line Using ANSYS. [Final Year Project] (Unpublished)

Nur’Aisyah bt Marzuki, Nur’Aisyah (2012) DEVELOPMENT AN AGGREGATE PLANNING MODEL FOR DISCRETE COMPONENT MANUFACTURING: A CASE STUDY FOR DISC BRAKE. [Final Year Project] (Unpublished)

O

OUMER, AHMED NURYE (2012) MODELING OF FIBER SUSPENSIONS FOR PREDICTION OF FIBER ORIENTATION IN INJECTION MOLDED POLYMER COMPOSITES. PhD. thesis, Universiti Teknologi PETRONAS.

Ollivia Lenya anak Sagu, Ollivia Lenya (2012) STRESS AT BOREHOLE DURING CARBON INJECTION. [Final Year Project] (Unpublished)

P

Past Year Exam Question (2012) FAB0025 INTRO TO BUSINESS & INFORMATION SYSTEM. [Past Year Examination Question]

Past Year Exam Question (2012) FAB0035 PRINCIPLES OF ECONOMICS. [Past Year Examination Question]

Past Year Exam Question (2012) FAC0015 CHEMISTRY 1. [Past Year Examination Question]

Past Year Exam Question (2012) FAC0025 CHEMISTRY II. [Past Year Examination Question]

Past Year Exam Question (2012) FAL0014 ENGLISH 1. [Past Year Examination Question]

Past Year Exam Question (2012) FAM0015 PRE-CALCULUS. [Past Year Examination Question]

Past Year Exam Question (2012) GAB4013 OPERATIONS MANAGEMENT. [Past Year Examination Question]

Past Year Exam Question (2012) HAB2013 HBB2013 HCB2013 CULTURAL ANTHROPOLOGY. [Past Year Examination Question]

Past Year Exam Question (2012) LCB1042 LBB1042 ACADEMIC WRITING. [Past Year Examination Question]

Past Year Exam Question (2012) MAB2053 MCB2063 MECHANICAL ENGINEERING THERMODYNAMICS II. [Past Year Examination Question]

Past Year Exam Question (2012) MAB3032 COMPUTER AIDED ENGINEERING. [Past Year Examination Question]

Past Year Exam Question (2012) MAB3062 FLUID MECHANICS II. [Past Year Examination Question]

Past Year Exam Question (2012) MAB3062 FLUID MECHANICS II. [Past Year Examination Question]

Past Year Exam Question (2012) MBB1023 MCB1053 STATICS. [Past Year Examination Question]

Past Year Exam Question (2012) MBB1043 MCB2043 DYNAMICS. [Past Year Examination Question]

Past Year Exam Question (2012) MBB1043 MCB2043 DYNAMICS. [Past Year Examination Question]

Past Year Exam Question (2012) MBB2022 MAB3032 COMPUTER AIDED ENGINEERING DESIGN. [Past Year Examination Question]

Past Year Exam Question (2012) MBB2043 MCB2034 SOLID MECHANICS. [Past Year Examination Question]

Past Year Exam Question (2012) MBB2053 MCB2063 MECHANICAL ENGINEERING THERMODYNAMICS II. [Past Year Examination Question]

Past Year Exam Question (2012) MBB2053 MCB2063 MECHANICAL ENGINEERING THERMODYNAMICS II. [Past Year Examination Question]

Past Year Exam Question (2012) MBB2063 MCB2053 FLUID MECHANICS II. [Past Year Examination Question]

Past Year Exam Question (2012) MBB2063 MCB2053 FLUID MECHANICS II. [Past Year Examination Question]

Past Year Exam Question (2012) MBB2072 MAB2083 MECHANICS OF MACHINES. [Past Year Examination Question]

Past Year Exam Question (2012) MBB2083 MCB1033 ELECTRICAL POWER AND MACHINES. [Past Year Examination Question]

Past Year Exam Question (2012) MBB2094 CONTROL SYSTEMS. [Past Year Examination Question]

Past Year Exam Question (2012) MBB2094 MAB3023 CONTROL SYSTEM MECHATRONICS II. [Past Year Examination Question]

Past Year Exam Question (2012) MBB3023 ENGINEERING MATERIALS. [Past Year Examination Question]

Past Year Exam Question (2012) MBB3023 MCB3023 ENGINEERING MATERIALS. [Past Year Examination Question]

Past Year Exam Question (2012) MBB3033 HEAT TRANSFER. [Past Year Examination Question]

Past Year Exam Question (2012) MBB3033 HEAT TRANSFER. [Past Year Examination Question]

Past Year Exam Question (2012) MBB3043 MCB3083 MECHANICAL ENGINEERING DESIGN. [Past Year Examination Question]

Past Year Exam Question (2012) MBB3043 MECHANICAL ENGINEERING DESIGN. [Past Year Examination Question]

Past Year Exam Question (2012) MBB3054 MANUFACTURING SYSTEMS & OPERATIONS. [Past Year Examination Question]

Past Year Exam Question (2012) MBB3054 MANUFACTURING SYSTEMS & OPERATIONS. [Past Year Examination Question]

Past Year Exam Question (2012) MBB4023 MAB3053 VIBRATION. [Past Year Examination Question]

Past Year Exam Question (2012) MBB4023 VIBRATION. [Past Year Examination Question]

Past Year Exam Question (2012) MBB4123 HYBRID VEHICLES. [Past Year Examination Question]

Past Year Exam Question (2012) MBB4123 MAB4123 HYBRID VEHICLES. [Past Year Examination Question]

Past Year Exam Question (2012) MBB4123 MAB4123 HYBRID VEHICLES. [Past Year Examination Question]

Past Year Exam Question (2012) MBB4133 MAB4233 VEHICLED DYNAMICS. [Past Year Examination Question]

Past Year Exam Question (2012) MBB4133 VEHICLE DYNAMICS. [Past Year Examination Question]

Past Year Exam Question (2012) MBB4213 ALTERNATIVE ENERGY. [Past Year Examination Question]

Past Year Exam Question (2012) MBB4223 MAB4513 ENERGY CONVERSION AND MANAGEMENT. [Past Year Examination Question]

Past Year Exam Question (2012) MBB4233 MAB4533 REFRIGERATION AND AIR CONDITIONING. [Past Year Examination Question]

Past Year Exam Question (2012) MBB4233 REFRIGERATION AND AIR-CONDITIONING. [Past Year Examination Question]

Past Year Exam Question (2012) MBB4313 ADVANCED MANUFACTURING TECHNOLOGY. [Past Year Examination Question]

Past Year Exam Question (2012) MBB4323 AUTOMATION AND ROBOTICS. [Past Year Examination Question]

Past Year Exam Question (2012) MBB4323 MAB4333 AUTOMATION AND ROBOTICS. [Past Year Examination Question]

Past Year Exam Question (2012) MBB4333 RELIABILITY AND MAINTENANCE. [Past Year Examination Question]

Past Year Exam Question (2012) MBB4333 RELIABILITY AND MAINTENANCE. [Past Year Examination Question]

Past Year Exam Question (2012) MBB4413 ADVANCED ENGINEERING MATERIALS. [Past Year Examination Question]

Past Year Exam Question (2012) MBB4413 MAB4413 ADVANCE ENGINEERING POLYMER, CERAMICS AND COMPOSITES. [Past Year Examination Question]

Past Year Exam Question (2012) MBB4423 CORROSION ENGINEERING. [Past Year Examination Question]

Past Year Exam Question (2012) MBB4433 FAILURE ANALYSIS. [Past Year Examination Question]

Past Year Exam Question (2012) MBB4433 MAB4423 FAILURE ANALYSIS AND NONDESTRUCTIVE EXAMINATION. [Past Year Examination Question]

Past Year Exam Question (2012) MBB4513 FACILITIES ENGINEERING TRANSPORTATION AND STORAGE. [Past Year Examination Question]

Past Year Exam Question (2012) MCB1012 INTRODUCTION TO MATERIAL SCIENCE. [Past Year Examination Question]

Past Year Exam Question (2012) MCB1012 INTRODUCTION TO MATERIAL SCIENCE. [Past Year Examination Question]

Past Year Exam Question (2012) MCB1012 MBB1052 INTRODUCTION TO MATERIAL SCIENCE. [Past Year Examination Question]

Past Year Exam Question (2012) MCB1033 ELECTRICAL POWER & MACHINES. [Past Year Examination Question]

Past Year Exam Question (2012) MCB1033 MBB2083 ELECTRICAL POWER & MACHINES. [Past Year Examination Question]

Past Year Exam Question (2012) MCB1053 MBB1023 STATICS. [Past Year Examination Question]

Past Year Exam Question (2012) MCB1053 MBB1023 STATICS. [Past Year Examination Question]

Past Year Exam Question (2012) MCB2013 FLUID MECHANICS I. [Past Year Examination Question]

Past Year Exam Question (2012) MCB2013 MBB2033 FLUID MECHANICS I. [Past Year Examination Question]

Past Year Exam Question (2012) MCB2013 MBB2033 FLUID MECHANICS I. [Past Year Examination Question]

Past Year Exam Question (2012) MCB2023 MBB2013 MECHANICAL ENGINEERING THERMODYNAMICS I. [Past Year Examination Question]

Past Year Exam Question (2012) MCB2023 MBB2013 MECHANICAL ENGINEERING THERMODYNAMICS I. [Past Year Examination Question]

Past Year Exam Question (2012) MCB2023 MBB2013 MECHANICAL ENGINEERING THERMODYNAMICS I. [Past Year Examination Question]

Past Year Exam Question (2012) MCB2034 MBB2043 SOLID MECHANICS. [Past Year Examination Question]

Past Year Exam Question (2012) MPW2153 MORAL STUDIES. [Past Year Examination Question]

R

ROFFIE, ZUBAIRI FARIHAN (2012) FINITE ELEMENT MODELING OF THICK WALLED VESSELS UNDERGOING LOCALIZED POST WELD HEAT TREATMENT. [Final Year Project] (Unpublished)

ROMENOR, MUHAMMAD RAFAEE (2012) MODEL OF COLLABORATION BETWEEN SUPPLIER AND MANUFACTURER FOR THE PROFIT SUPPLY CHAIN. [Final Year Project] (Unpublished)

Raja Mohamed Abdul Shaini, Raja Mohamed Rizal (2012) Performance of the Single and Double Pass V-Groove Solar Collector. [Final Year Project] (Unpublished)

Ramah Moorthy, Kuhaneswaren (2012) Screening Model for CO2 Miscible Flooding. [Final Year Project] (Unpublished)

Ramli, Meor Ahmad Saiful Ridhwan (2012) Modelling of Hydrates in Subsea Pipeline. [Final Year Project] (Unpublished)

Ramli, Syaida Hazira (2012) CFD SIMULATIONS OF ANNULAR DISTRIBUTOR OF SWIRLING FLUIDIZED BED (SFB) REACTOR. [Final Year Project] (Unpublished)

Romenor, Muhammad Rafaee (2012) MODEL OF COLLABORATION BETWEEN SUPPLIER AND MANUFACTURER FOR THE PROFIT OF SUPPLY CHAIN. [Final Year Project] (Unpublished)

Romenor, Muhammad Rafaee (2012) MODEL OF COLLABORATION BETWEEN SUPPLIER AND MANUFACTURER FOR THE PROFIT OF SUPPLY CHAIN. [Final Year Project] (Unpublished)

Romenor, Muhammad Rafaee (2012) MODEL OF COLLABORATION BETWEEN SUPPLIER & MANUFACTURER FOR THE PROFIT OF SUPPLY CHAIN. [Final Year Project] (Unpublished)

S

SAMI ULLAH, SAMI ULLAH (2012) SYNTHESIS, CHARACHTERIZATION AND EVALUATION OF EXPANDABLE GRAPHITE BASED INTUMESCENT FIRE RETARDANT COATING FOR STEEL STRUCTURES. Doctoral thesis, UNIVERSITI TEKNOLOGI PETRONAS.

SHAHIR BIN AHMAD SABRI, SHAHIR (2012) EFFECT OF THE INTERNAL FLUID FLOW IN THE GLASS FIBRE REINFORCED PLASTIC (GFRP) DYNAMIC. [Final Year Project] (Unpublished)

SHARIFF, MOHD FARITH (2012) HEAT SHIELDING PERFORMANCE OF MINERAL BASED INTUMESCENT FIRE RETARDANT COATING. [Final Year Project] (Unpublished)

SINNADURAI, SUREN LIM (2012) A COMPUTATIONAL APPROACH FOR THE MODELING OF SHORT-FIBER ORIENTATION IN A VISCOUS FLOW DURING THE MOLD-FILLING PROCESS USING DIFFERENT CLOSURE APPROXIMATIONS. Masters thesis, UNIVERSITI TEKNOLOGI PETRONAS.

SULAIMAN, AHMAD NURAIZAT (2012) THERMODYNAMIC ANALYSIS OF GAS TURBINE. [Final Year Project] (Unpublished)

Sabri, Shafiq Hakimi (2012) Conceptual Design Support Tool For Subsea Equipment Processing System. [Final Year Project] (Unpublished)

See Yun Chuan, See Yun Chuan (2012) Influence of Varying Rockwool Fibre Length on Properties of Intumescent Coating. [Final Year Project] (Unpublished)

Shamsud, Mohamad Hanif (2012) Design of a Desiccant Wheel of Thermally Driven Dehumidification System. [Final Year Project] (Unpublished)

Shamsudin, Mohamad Hanif (2012) Design of a Desiccant Wheel of Thermally Driven Dehumidification System. [Final Year Project] (Unpublished)

Sheikh Ali, Hanif (2012) CHARACTERIZATION OF REFORMER TUBE CREEP DAMAGE BY ULTRASONIC ATTENUATION PATTERN AND MICROSTRUCTURAL CHANGES. [Final Year Project] (Unpublished)

Shiva Sarvanan Pillai Subramaniam, Shiva (2012) Effects of Particle Size of Fumed Silica and Aluminium Trihydrate on Fire Performance of Intumescent Fire Retardant Coating. [Final Year Project] (Unpublished)

Siti Marhamah binti Mustafha, Siti Marhamah (2012) Design and Fabrication of Horizontal Turbine for Rural Microhydroelectric Generations. [Final Year Project] (Unpublished)

Siti Suhailah Binti Khairullah, Siti Suhailah (2012) PERFORMANCE MEASURE FOR STEAM ABSORPTION CHILLER OF A DISTRICT COOLING PLANT. [Final Year Project] (Unpublished)

Sitoi, Helder (2012) Solar adsorption cooling system using activated media for equatorial humid climate. [Final Year Project] (Unpublished)

Syed Ahmad Alhabshi, Syed Naufal (2012) Thermal Distribution of Temperature Rise for 18V Cordless Impact Drill. [Final Year Project] (Unpublished)

Syed Muhammad Afiq Bin Syed Othman, Syed Muhammad (2012) DESIGN OF MECHATRONIC SYSTEM FOR EYEBALL MOVEMENT. [Final Year Project] (Unpublished)

T

TRI BHASKORO, PETRUS (2012) EFFECT OF ADAPTIVE COOLING TECHNIQUE ON ENERGY USAGE PATTERNS OF A CENTRALIZED HVAC SYSTEM. Masters thesis, UNIVERSITI TEKNOLOGI PETRONAS.

W

WISMO WINARTO, FELIXTIANUS EKO (2012) INVESTIGATION OF MICRO BUBBLE FOR THE REMOVAL OF SUSPENDED PARTICLE AND ENHANCEMENT OF DISSOLVED OXYGEN IN POLLUTED WATER. Doctoral thesis, UNIVERSITI TEKNOLOGI PETRONAS.

Wan Ibrahim Bin Wan Mamat, Wan Ibrahim (2012) Development in Synthesis of Silicon Carbide from Natural Resource. [Final Year Project] (Unpublished)

Wan Sohaimi, Wan Muhammad Faris (2012) EVALUATION OF COATING PERFORMANCE FOR CORROSION UNDER INSULATION (CUI) PREVENTION. [Final Year Project] (Unpublished)

Wong Ning, Wong Ning (2012) Characterizing the Paraffinic Composition in Malaysian Crudes. [Final Year Project] (Unpublished)

Y

Yong, Lawrence Hao Peng (2012) Fill Removal in Wellbore Using Coiled Tubing. [Final Year Project] (Unpublished)

Yusof, Muhammad Shafiq (2012) Physical Properties Characterization of Biomass Fuel Briquette Made from Oil Palm Mill Residues. [Final Year Project] (Unpublished)

Yusoff, Muhamad Azlan (2012) Development of Life Cycle Cost Model of Passenger Car. [Final Year Project] (Unpublished)

Z

ZAINUDDIN, AHMAD FAZUAN (2012) THERMAL ANALYSIS OF ELECTRICAL DISCHARGE MACHINING USING QUITE ELEMENT TECHNIQUE. [Final Year Project] (Unpublished)

ZOHARI, ZAIFUL IQMAL (2012) A STUDY OF GASEOUS PRODUCTS OF MINERAL BASED INTUMESCENT FIRE RETARDANT COATING IN STRUCTURAL APPLICATION. [Final Year Project] (Unpublished)

Zainudin, Abdullah Farhan (2012) Influence of Heat Treatment and Microstructure on the Corrosion Performance of Carbon Steel Line Pipe in CO2 Environment. [Final Year Project] (Unpublished)

Zulkifly, Muhammad Amsyar (2012) MODAL ANALYSIS OF AN AIRCRAFT LANDING GEAR. [Final Year Project] (Unpublished)