Items where Department / MOR is "Mechanical" and Year is 2019

Thesis

,,, Muhammad Yasir (2019) The Study of Machinibility and Stress Corrosion Cracking Susceptibility of 316L Stainless Steel using End-Milling. Masters thesis, Universiti Teknologi PETRONAS.

A/L ARUMUGAM, THIBANKUMAR (2019) Residual Strength Analysis of Corroded Pipe Subjected to Internal Pressure and Longitudinal Compressive Stress. Masters thesis, Universiti Teknologi PETRONAS.

ABBAS, SYED SAMAR (2019) NUMERICAL INVESTIGATION ON HEMODYNAMICS AND PLATELET ACTIVATION POTENTIAL OF BILEAFLET MECHANICAL HEART VALVES. Masters thesis, Universiti Teknologi PETRONAS.

ABBASI, AIJAZ ALI (2019) Prediction Model for Natural Gas Hydrate Formation Property Relations. PhD. thesis, Universiti Teknologi PETRONAS.

ABDU ALIYU, ABDUL’AZEEZ (2019) COATING OF BULK METALLIC GLASS THROUGH ELECTRO-DISCHARGE PROCESS FOR POTENTIAL ORTHOPEDIC APPLICATION. PhD. thesis, Universiti Teknologi PETRONAS.

ABDUL MUTTALIB, MOHD FADHIL HARFIEZ (2019) FUEL CHARACTERIZATION AND COMBUSTION MODELLING OF POULTRY PROCESSING DEWATERED SLUDGE IN A BUBBLING FLUIDIZED BED REACTOR. PhD. thesis, Universiti Teknologi PETRONAS.

ABDUL RAZAK, MUHAMMAD AL’HAPIS (2019) PARTICLES MIXED ELECTRO-DISCHARGE MACHINING OF MAGNESIUM ALLOY FOR IMPLANTS APPLICATION. Doctoral thesis, Universiti Teknologi PETRONAS.

ABDULMALEK, SHAYMAA HUSHAM (2019) DEVELOPMENT AND EVALUATION OF HYBRID SOLAR-THERMAL DESICCANT MULTI-CHAMBER DRYER FOR IMPROVING DRYING UNIFORMITY. PhD. thesis, Universiti Teknologi PETRONAS.

AHMAD, MOHD FADZIL ALI (2019) Improving Performance of Wet-Gas Separator Through Compact Supersonic Vertical Configuration. Doctoral thesis, Universiti Teknologi PETRONAS.

AHMAD JAAL, RAFIDA (2019) INVESTIGATION OF CORROSION INHIBITION MECHANISM OF IMIDAZOLINE-BASED INHIBITOR IN CO2 ENVIRONMENT USING ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY (EIS). Masters thesis, Universiti Teknologi PETRONAS.

APPASAMY, JEVITHA SRI (2019) EVALUATION OF N-DOPED TiO2/SWCNT COATING LAYER FOR SELF-CLEANING SOLAR PHOTOVOLTAIC CELL APPLICATION. Masters thesis, Universiti Teknologi PETRONAS.

BAIG, ZEESHAN (2019) Development and Characterization of Graphene Nanoplatelets Reinforced Aluminum Nanocomposites. Doctoral thesis, Universiti Teknologi PETRONAS.

Babiker Adam, Mohammed Elamen (2019) Data Palm Seeds For Power Generation: Thermochemical conversion analysis of a gasifier-engine system. Doctoral thesis, Universiti Teknologi PETRONAS.

DAN, NSIKAN ETIM (2019) LOW TEMPERATURE NITRIDING OF DUPLEX STAINLESS STEEL TO INFLUENEC THE COMPOSITION ON CORROSION AND WEAR PROPERTIES. PhD. thesis, Universiti Teknologi PETRONAS.

EL ADAWY, MOHAMMED ABD EL MOTLEB KOTB (2019) CHARACTERIZATION OF FLOW STRUCTURES IN THE CYLINDER OF A GDI ENGINE USING STEREOSCOPIC-TIME RESOLVED PIV AND POD. PhD. thesis, Universiti Teknologi PETRONAS.

FARHOOD, NASEER HAMED (2019) EXPERIMENTAL AND FINITE ELEMENT ANALYSIS OF IMPACT DAMAGE RESISTANCE ON TYPE IV CARBON-BASALT/EPOXY HYBRID COMPOSITE PRESSURE VESSELS. PhD. thesis, Universiti Teknologi PETRONAS.

FAROOQ, I AZAM (2019) ANALYSIS OF SIXBAR LINKAGE APPLICATION TO GLOBE VALVE. Masters thesis, Universiti Teknologi PETRONAS.

FENTAYE, AMARE DESALEGN (2019) GAS TURBINE CONDITION MONITORING AND MAINTENANCE THROUGH AN INTEGRATED INTELLIGENT GAS-PATH DIAGNOSTICS. PhD. thesis, Universiti Teknologi PETRONAS.

GEBREMEDHEN, HAILU SHIMELS (2019) ENHANCING COMPUTATIONAL EFFICIENCY OF STRESS CONSTRAINED TOPOLOGY OPTIMIZATION. Doctoral thesis, Universiti Teknologi PETRONAS.

HARROUN, MHADI ABAKER ISMAEL (2019) INVESTIGATION ON THE DISPERSED PHASE, DROPLET MICROEXPLOSION AND SPRAY CHARACTERISTICS OF WATER-IN-DIESEL EMULSIONS. PhD. thesis, Universiti Teknologi PETRONAS.

ISMAEEL, ALI ABDUL WAHAB (2019) DEVELOPMENT AND EVALUATION OF DOUBLE SOLAR COLLECTORS INTEGRATED WITH VORTEX POWER GENERATOR. Doctoral thesis, Universiti Teknologi PETRONAS.

JESSAM, RAED ABBAS (2019) EXPERIMENTAL AND NUMERICAL INVESTIGATIONS ON THE PERFORMANCE OF S-SHAPED DIFFUSERS USING ENERGY PROMOTERS. Doctoral thesis, Universiti Teknologi PETRONAS.

KHAN, SAJJAD RAZA (2019) EXPERIMENTAL EVALUATION OF FATIGUE AND DYNAMIC TENSILE PROPERTIES OF REFILL FRICTION STIR SPOT WELD. PhD. thesis, Universiti Teknologi PETRONAS.

LIM, HUI LING (2019) A STUDY ON DEVELOPMENT OF REFINED EMPIRICAL FORMULATION IN PREDICTING THE ULTIMATE STRENGTH OF STIFFENED PANEL SUBJECTED TO LONGITUDINAL COMPRESSION. Masters thesis, Universiti Teknologi PETRONAS.

MAILABARI, RAPHAEL JOSHUA (2019) SYNTHESIS AND CHARACTERIZATION OF HYBRID NANO-FILLER REINFORCED EPOXY NANOCOMPOSITE FOR STRUCTURAL HEALTH MONITORING OF PETROLEUM PIPELINE. PhD. thesis, Universiti Teknologi PETRONAS.

MD SALLEH, SHAHRUL NIZAM (2019) TENSILE, PHYSICAL AND CHEMICAL CHARACTERIZATION OF PAN FIBRE MODIFIED WITH OLEIC ACID POST SPINNING TREATMENT. Masters thesis, Universiti Teknologi PETRONAS.

MEYGHANI, BAHMAN (2019) THERMOMECHANICAL ANALYSIS OF FRICTION STIR WELDING (FSW) ON CURVED PLATES BY ADAPTING CALCULATED TEMPERATURE DEPENDENT PROPERTIES. Doctoral thesis, Universiti Teknologi PETRONAS.

MOHAMMAD, SANAN T. (2019) EXPERIMENTAL IMPLEMENTATION AND CODE DEVELOPMENT TO EVALUATE A PARABOLIC TROUGH SOLAR THERMAL POWER PLAN. Doctoral thesis, Universiti Teknologi PETRONAS.

MOHAMMED MUTAFI, MOHAMMED ABDULLAH (2019) NUMERICAL INVESTIGATION ON THE EFFECT OF BALCONY OPEN UPSTAND ON SMOKE CONTAMINATION IN ATRIUM UPPER BALCONIES. Masters thesis, Universiti Teknologi PETRONAS.

MOHD JANI, NORANIZA (2019) THE PERFORMANCE OF BASALT AND PVA FIBRE REINFORCED SELF-COMPACTING CONCRETE SLABS SUBJECTED TO HIGH INTENSITY FIRE. Masters thesis, Universiti Teknologi PETRONAS.

MOHD YUNOS, YUSNENTI FAZIRAN (2019) SILICANIZING PROCESS ON MILD STEEL SUBSTRATE USING TRONOH SILICA SAND (SiO2) FINE PARTICLES. Doctoral thesis, Universiti Teknologi PETRONAS.

MONI, MOHAMAD NAZMI ZAIDI (2019) DOWNDRAFT CO-GASIFICATION OF OIL PALM BIOMASS FOR PRODUCTION OF SYNTHESIS GAS. PhD. thesis, Universiti Teknologi PETRONAS.

Memon, Zeeshan (2019) Experimental Investigation of Two- Phase Separation in a T-Junction with Combined Diameter Ratio. Masters thesis, Universiti Teknologi PETRONAS.

Naseer, Abqaat (2019) Grafting Of Metal Oxides On Graphene Nanoplatelets For Copper Composites Via Powder Injection Molding. Masters thesis, Universiti Teknologi PETRONAS.

PARAMAGURU, DHANIS (2019) INVESTIGATION OF UNDERWATER FRICTION STIR WELDING ON 5052 ALUMINIUM ALLOY TO OPTIMIZE THE JOINT STRENGTH. Masters thesis, Universiti Teknologi PETRONAS.

PUSPITASARI, DEWI (2019) THE INFLUENCE OF STRESS RELIEVING PARAMETERS ON THE PROPERTIES OF CLOSED-CELL ALUMINIUM ALLOY FOAM. Masters thesis, Universiti Teknologi PETRONAS.

SHAMSHIRGARAN, SEYEDREZA (2019) TECHNO-ECONOMIC OPTIMIZATION OF BIO-NANOFLUID-BASED SOLAR FLAT-PLATE COLLECTORS. PhD. thesis, Universiti Teknologi PETRONAS.

Sivanathan, Prema (2019) Effect of Chloride Concentrations and Temperature On Pre-Stressed Austenitic Stainless Steel 304 Based on Pressure Vessel in Oil and Gas Industry. Masters thesis, Universiti Teknologi PETRONAS.

ULLAH, BARKAT (2019) DESIGN AND MOTION CONTROL OF AN UNDERWATER GLIDER IN THE PRESENCE OF WAVE AND CURRENT DISTURBANCES. PhD. thesis, Universiti Teknologi PETRONAS.

YONG , HONG YAW (2019) HYDRODYNAMIC STUDY OF FREE STANDING DRILLING RISERS UNDER HURRICANE CONDITIONS. Masters thesis, Universiti Teknologi PETRONAS.

ZAHARIN, HAIZUM AIMI (2019) ANALYSIS OF POROUS STRUCTURE DESIGNS FOR IMPLANT APPLICATION USING ADDITIVE MANUFACTURING. Masters thesis, Universiti Teknologi PETRONAS.