Browse by Type

,

Souriaprasant (2024) Implementation of Azure DevOps into Budgeting and Expenses Management. [Final Year Project] (Submitted)

Chow Jet (2024) Mechanical and thermal characterizations of electrospun nanoyarn developed through nanomanufacturing technique. [Final Year Project] (Submitted)

NASIHA ATHIRA (2024) Paleo-depositional Trend Modeling for Optimized Natural Gas Reservoir Identification: A Step Towards Clean and Sustainable Energy Development. [Final Year Project] (Submitted)

Adlan Arif (2024) Onshore NW Peninsular Malaysia Geophysical Exploration Integrated Resistivity and Gravity. [Final Year Project] (Submitted)

A

ADLINA, MARIAH NUR (2024) ASSESSMENT OF TORREFACTION PERFORMANCE USING FLARE GAS AS A SUSTAINABLE TORREFACTION MEDIUM. [Final Year Project] (Submitted)

AHMAD TARMIZI, AZRUL HAKIM (2024) HEAVY METAL REMOVAL VIA CONSTRUCTED WETLAND. [Final Year Project] (Submitted)

ABDULLAYEV, RASHID (2024) SYNTHESIS, CHARACTERIZATION AND THERMAL DECOMPOSITION PATHWAY OF MOF@IONIC LIQUID HYBRID MATERIAL. [Final Year Project] (Submitted)

ARMAN, NURBATRISYIA AQILAH (2024) DEVELOPMENT OF PREDICTIVE MODEL TO PREDICT ADVERSE EFFECT ON EMOLLIENT SAFETY. [Final Year Project] (Submitted)

AJAK, ACHOL AGUEK TENGTENG (2024) SOLVENT-AIDED CRYSTALLIZATION FOR PURIFICATION OF BIODIESEL SYNTHESIZED FROM COCONUT OIL. [Final Year Project] (Submitted)

Abd Rahman, Masturah Dinie (2024) Smart and adaptive traffic light controller using vehicle density estimation at cross junctions. [Final Year Project] (Submitted)

Abu Bakri, Nur Afiqah (2024) AI enabled Speed regulation circuit for pico hydro generators. [Final Year Project] (Submitted)

Abdul Kafi, Dayana Batrisya (2024) Virtual Calibration certification using Blockchain. [Final Year Project] (Submitted)

Abdul Samad, Nur Alyssa (2024) Enhancing State of Health Estimation for Lithium-Ion Batteries Using Artificial Neural Networks. [Final Year Project] (Submitted)

Abdul Aziz, Nurin Insyirah (2024) Improving detection rate of insect invasion symptoms on tree leaves using synthesized images. [Final Year Project] (Submitted)

Arman, Amar Amirul (2024) Low cost walkie talkie circuit design and simulation. [Final Year Project] (Submitted)

Arbaai, Mohd Zhafiq Zaimie (2024) Fault Detection and Diagnosis in Electrical Motors Using Thermal Imaging Analysis. [Final Year Project] (Submitted)

Abd Ghani, Nurul Shahirah (2024) IoT-Enhanced Residential Database for Smart Diabetes Management. [Final Year Project] (Submitted)

Alias, Nabil Rizwaan (2024) Document Understanding Chatbot. [Final Year Project] (Submitted)

Azlan Shah, Aish Afryna (2024) Smart PaddyTech: Paddy Production Weather App and Pest Identification Chatbot. [Final Year Project] (Submitted)

AHMAD NAZMI, ATIKAH (2024) Fleet Management System & Dashboard. [Final Year Project] (Submitted)

Abdul Rahim, Saifullah (2024) SMART Traffic Light. [Final Year Project] (Submitted)

Abd Khalid, Nuha Nabilah (2024) Automated Expiration Alert System for Medical Supply. [Final Year Project] (Submitted)

Anthony Dass, Brendan Rahul (2024) Cybersecurity Training in the Metaverse. [Final Year Project] (Submitted)

Anuar, Muhammad A’rif (2024) Revolutionizing Fast Fashion Logistics: A Blockchain-Based Supply Chain Management System. [Final Year Project] (Submitted)

Abdul Khalid, Muhamad Syakirin (2024) Development of Augmented Reality (AR) Application for Gas Turbine. [Final Year Project] (Submitted)

Ahamad Azrahi, Nur Syuhada (2024) PHANTOM JAMS PREDICTION SIMULATION. [Final Year Project] (Submitted)

ABDUL HADI, NURUL 'IZZATI (2024) Automated Monitoring System for Program Accreditation. [Final Year Project] (Submitted)

Azmi, Muhammad Ihsan (2024) UTP E-Commerce Platform. [Final Year Project] (Submitted)

ABDULLAH, MAT ZARIF (2024) Itinerary Planning and Budget Approval System (IPBAS) Through Automated Data Driven Workflow. [Final Year Project] (Submitted)

Abd Azis, Abdul Hakim (2024) Revolutionizing Climate Action with CCUS Awareness using Metaverse. [Final Year Project] (Submitted)

Ali, Mohammed Sahil (2024) TOWARDS DEVELOPMENT OF A CARPOOLING APPLICATION SERVICE FOR UNIVERSITIES: UNISHARE. [Final Year Project] (Submitted)

ADNAN, NUR HUSNIENA IZZATY (2024) Sensitivity Analysis of Marine Controlled Source Electromagnetic Parameters for Carbon Capture Monitoring. [Final Year Project] (Submitted)

Abbas, Joseph Logoronyo (2024) Investigating the Effect of Superplasticizers and Curing temperature on Mechanical Properties of Ultra High-Performance Concrete - Compressive, Flexural, and Tensile Strength. [Final Year Project] (Submitted)

Abd Rahman, Nur Afham Syafiq (2024) Evaluation of Shoreline Changes of Manjung District Using Digital Shoreline Analysis System (DSAS). [Final Year Project] (Submitted)

Andre, Agam (2024) House Rental Management System for UTP Postgraduate Students. [Final Year Project] (Submitted)

Abd Mutalib, Nurrul Kamaliah (2024) Scentopia: Navigating the World of Fragrance. [Final Year Project] (Submitted)

Anak Lawrence, Larry Bhaduth (2024) Online Tailoring System. [Final Year Project] (Submitted)

Azisul Haq, Absarina (2024) ENTERPRISE RISK MANAGEMENT SYSTEM. [Final Year Project] (Submitted)

Arzahar, Nur Rabiatul Adawiyah (2024) University Event Management System. [Final Year Project] (Submitted)

Abd Rahman, Muhammad Haiqal Danial (2024) Techno-Economic Study for Gas Flaring system; Towards Zero Flaring. [Final Year Project] (Submitted)

Airul Asni, Farra Diba (2024) SCREENING OF IONIC LIQUIDS FOR CO2 CAPTURE. [Final Year Project] (Submitted)

Abdul Manan, Nur Ainin Sofiya (2024) Investigation of sand consolidation efficiency of epoxy resin assisted by permeability enhancing additives. [Final Year Project] (Submitted)

Azri Farid, Nurrin Batrisyia (2024) Plugging performance Evaluation of Green Pickering Emulsion for Conformance Control. [Final Year Project] (Submitted)

Ajang, Isaac Shouki Aboch (2024) A Comprehensive Investigation on the Adsorptive Characteristics of a Commercial Polymeric Surfactant in Sandstone. [Final Year Project] (Submitted)

Abdullah, Ahmad 'Iefwatfaaris (2024) Optimizing mother wavelet and decomposition level selection for enhanced fault detection. [Final Year Project] (Submitted)

Azizan, Mohamad Zhafran Hafiz (2024) Process and energy efficiency based study optimisation for upstream processes. [Final Year Project] (Submitted)

Azmi, Adriana Nuralia (2024) Study effect of Activating Agents towards Production of Rubber-Seed Shell Activated Carbon for Removal of Oil, Grease and Chemicals Spillage. [Final Year Project] (Submitted)

Azman, Muhammad Aiman Hakim (2024) Preparation & Evaluation of Graphene Oxide from Lignin biomass as Potential Supercapacitor. [Final Year Project] (Submitted)

Ahmad Shafie, Mohamad Hafiz Fahmi (2024) Synthesis of cyclic carbonate from carbon dioxide gas for CO2 utilization. [Final Year Project] (Submitted)

Azhar, Nabilah Husna (2024) Modeling the effect of process parameters on CO2 methanation using machine learning algorithms. [Final Year Project] (Submitted)

Ayub, Aelieya Shahira (2024) Safety Analysis for Early Integration into Automated Engineering Workflows. [Final Year Project] (Submitted)

Azaman, Muhammad Aiman Ikmal (2024) Synthesis, Characterization and Thermal Decomposition Pathway of MOF@Ionic Liquid Hybrid Material. [Final Year Project] (Submitted)

Abdullah, Azalia (2024) Sonodegradation of micro-pollutants in aqueous solution. [Final Year Project] (Submitted)

Ag Abu Bakar, Ag Mohd Izzuddin (2024) A Study of the Carbon Credit Framework in Malaysia's Petroleum Refineries/Petrochemical Industry. [Final Year Project] (Submitted)

Arivanandan, Suvan (2024) Mechanical and thermal properties effect on glycerol-pha treated of banana peel fibers composite films. [Final Year Project] (Submitted)

Ahmad Khairuddin, Ahmad Danial Hakim (2024) Extraction of Sugar Alcohols from Fermentation Broth as Sustainable Sweetener, Stabilizer, Surfactant and Humectant. [Final Year Project] (Submitted)

Abdullah, Nurantashah (2024) Amino acid based ionic liquids for co2 capture and conversion. [Final Year Project] (Submitted)

Ashraf Mukhlis, Rasyiqah Hanani (2024) Adsorption behaviour of methane onto non-carbonaceous adsorbent into microporous mixed matrix membrane (MMM). [Final Year Project] (Submitted)

Abdul Hisham, Amirul Aiman Haqeem (2024) Adsorption of microplastics from aqueous solutions by modified magnetic biochar adsorbents. [Final Year Project] (Submitted)

Alias, Ahmad Fadhli (2024) Synthesis and Characterization of Zeolitic Imidazole Framework decorated graphene oxide for room temperature hydrogen storage. [Final Year Project] (Submitted)

Abd Hisham, Aiman Shafiq (2024) In-situ functionalized activated carbon for CO2 adsorption. [Final Year Project] (Submitted)

Abdul Malek, Muhammad Syu'aib (2024) Optimization of Liquified Petroleum Gas Treating Unit. [Final Year Project] (Submitted)

Ahmad Faizal, Balqis (2024) Deep Neural Network Segmentation and Classification of Seizure State from Zebrafish videos for Traumatic Injury. [Final Year Project] (Submitted)

Azmi Sham, Amrizal Shahrul Danial (2024) Improvement of Waste Identification for A Sustainable Water Waste Collection Unmanned Surfaced Vehicle (USV). [Final Year Project] (Submitted)

Amir Husain, Muhammad Arif (2024) EV Charging Integration via Smart Grid Using Machine Learning. [Final Year Project] (Submitted)

Ahmad Termizi, Ahmad Azfar (2024) Implementation of Fractional-order PID Controller for Mobile Robot Using Arduino. [Final Year Project] (Submitted)

Abd Rasid, Muhammad Asyraf (2024) Sea conditions forecast. [Final Year Project] (Submitted)

Abdul Aziz, Hana Najwa (2024) Brain Computer Interface for Device Controls. [Final Year Project] (Submitted)

Ahmad Rezal, Nur Amira (2024) Major depressive Disorder detection using Effective Connectivity of EEG Signals and Deep Learning Transformer Model. [Final Year Project] (Submitted)

Ar Rayan, Daffa Muhammad Adha (2024) Behavior-Based Motion Planning of Autonomous Car Using Deep Learning Algorithm. [Final Year Project] (Submitted)

A. S. Viknesvaran, Naveenkumar (2024) Enhancing Electrical Vehicle Acceleration Performance With Supercapacitor Aided Regenerative Braking. [Final Year Project] (Submitted)

Azlin, Ahmad Arief Daniel (2024) Development of machine learning prediction model for sand production in oil & gas pipeline. [Final Year Project] (Submitted)

Abdul Nasir, Wan Amir Afiq (2024) Development of solar photovoltaic energy-storage system for a photo-electro-chemical (PEC) hydrogen production. [Final Year Project] (Submitted)

Aminuddin, Muhammad Faiq Afif (2024) Effect of 2D Nanocarbon-Based Nanofluid Coating for Effective Scale Inhibitor Management in Oil & Gas Production. [Final Year Project] (Submitted)

Azman, Muhammad Aiman (2024) Innovative Plasma-Exposed Materials for Advancing Fusion Reactor Performance. [Final Year Project] (Submitted)

Azlan, Aina Zafirah (2024) Effect of Volatile Corrosion Inhibitor on the Condensation and Corrosion Rates of Top-of-Line Corrosion in carbon steel. [Final Year Project] (Submitted)

Aedy Aeraunty, Nor Azlina (2024) Numerical Investigation of The Freshwater Production Performance and Rate of Evaporation for The Solar Desalination Process using MXene with Phase Change Material. [Final Year Project] (Submitted)

Ahmad Fauzi, Muhamad Nor Adlan (2024) Compression behaviour and energy absorption of foam-filled 3D-printed honeycomb sandwich composite structures. [Final Year Project] (Submitted)

Abdul Rahman, Amir Thaqif (2024) Pipe dented detection using acoustic emission. [Final Year Project] (Submitted)

Abd Rahman, Muhammad Haikal (2024) Lithium battery thermal management performances using a liquid cooling system. [Final Year Project] (Submitted)

Ahmad Shafudean, Nur Alyaa Safiya (2024) Corrosion study of the coated metal exposed to H2S environment. [Final Year Project] (Submitted)

Aminuddin, Amirul Basyiruddin (2024) Reliability prediction of Pipelines Exposed to Flow Induced Vibration. [Final Year Project] (Submitted)

Anuar, Muhammad Afiq (2024) Simulation of control of vibrations of piping system through usage of tuned mass damper system. [Final Year Project] (Submitted)

Abang Esmiera, Abang Irfaan (2024) Plasma treatment for lattice defect repair of laser-induced graphene. [Final Year Project] (Submitted)

alkhalil, Mustafa (2024) The Influence of Entry Length and Flow Development Regime in CFD. [Final Year Project] (Submitted)

Arichandrn, Sarrvesh (2024) The effect of viscosities and densities in multiphase flow in pipe. [Final Year Project] (Submitted)

Ahmad Shahabuddin, Ahmad irfan (2024) Enhancing Sand Screen Design: Unraveling Sand-Screen Interactions for Improved Flow and Sand Production Control. [Final Year Project] (Submitted)

Azman, Aiman Syafiq (2024) Design Optimization of High Torque Low Speed Radial Flux Permanent Magnet In-Wheel Motor for Agriculture Trolley. [Final Year Project] (Submitted)

Azisul Haq, Absarina (2024) Enteprise Risk Management System. [Final Year Project] (Submitted)

A. Hamid, Ishak Azizi (2024) Experimental study on steel-concrete deck slabs with UHPC concrete core. [Final Year Project] (Submitted)

Abu Bakar Sidek, Alisya Humaira (2024) Design of Monopile Foundations for Offshore Floating Wind Turbine. [Final Year Project] (Submitted)

Ab Aziz, Muhammad Abu Hanifah (2024) Optimisation study for removal of pollutants from wastewater using RSM. [Final Year Project] (Submitted)

B

Bonaventure, Evaviye Juanne (2024) MLP-Net Binary Numerical Image Classification. [Final Year Project] (Submitted)

Basri, Muhammad Syakir Sanim (2024) Predictive Maintenance Optimization of Equipment in Oil And Gas. [Final Year Project] (Submitted)

Bakhtiar, Nur Nadhira Dayana (2024) KidSafe: Smart Cabin Detection System for Child Safety in Vehicles. [Final Year Project] (Submitted)

Bani, Danial (2024) Predictive Analysis for Upcoming COVID-19 Cases. [Final Year Project] (Submitted)

Bong, Amberlye Wern Yie (2024) Railway Tracking System. [Final Year Project] (Submitted)

Bahrudin, Muhammad Aiman Aqil (2024) Universal EV Charging Tracker. [Final Year Project] (Submitted)

Baharudin Shah, A.B Eisya Natashah (2024) Sentiment Analysis-Based Approach in Automating Employee Retention Strategies. [Final Year Project] (Submitted)

Batali, Elias Levi Sebit (2024) Blockchain Technology and Supply Chain Management in the Construction Industry. [Final Year Project] (Submitted)

Bul, David (2024) Effect of Graphene Oxide as Nano Material on the Durability Properties of Concrete Blended with Silica Fume as Cementitious Material. [Final Year Project] (Submitted)

Bernadus, Muhammad Hakimie Daniel (2024) SeniorCare: A Mobile Medication Reminder Apps for Seniors. [Final Year Project] (Submitted)

Binti Kithar, Iffah Athirah (2024) Predicting Gas Solubility Using Machine Learning Techniques. [Final Year Project] (Submitted)

Bong, Darius Qi Xuan (2024) Gas Hydrate formation using green solvent. [Final Year Project] (Submitted)

Burhanuddin, Nor Syahirah (2024) Development of inherently safer design assessment framework using phenomena incident ranking table. [Final Year Project] (Submitted)

Baharuddin, Mohammad Tarmizi (2024) Printable Picohydroelectric Generator. [Final Year Project] (Submitted)

Bakri, Muhammad Aliff ZIkri (2024) Reliability, availability and maintainability (RAM) modeling with discrete event simulation method. [Final Year Project] (Submitted)

Bakar Shah, Muhammad Dennis (2024) Conductive Polymer Based Nanocomposites Coated Electrode for H2 Production. [Final Year Project] (Submitted)

Bernadus, Muhammad Hakimie Daniel (2024) SeniorCare: A Mobile Reminder Application for Senior. [Final Year Project] (Submitted)

C

CHANG, HARRIS CHING LI (2024) INVESTIGATING OILY SLUDGE SEPARATION TECHNIQUE. [Final Year Project] (Submitted)

Chok, Jing Jie (2024) Development of Guidance and Navigation System of Water Waste Collector. [Final Year Project] (Submitted)

Ch'ng, Jing Ying (2024) Rust measurement and detection using live camera using a drone. [Final Year Project] (Submitted)

Chew, Jing Ye (2024) Automated Internship Report Duty System Using Robotic Process Automation (RPA). [Final Year Project] (Submitted)

Calson, Woon (2024) U-Club: A Portal For Students To Advertise Their Clubs. [Final Year Project] (Submitted)

Chang, Eon Hau (2024) IS: MetaVerse: Transformative Education in Malaysia. [Final Year Project] (Submitted)

Cheong, William zhen yong (2024) Web-based system for UTP Research Staff Recruitment. [Final Year Project] (Submitted)

CLEMENT, MELANIE RACHEL (2024) Topology analysis of fractured limestone in Kinta Valley, Ipoh. [Final Year Project] (Submitted)

CHE MALIK, CHE NUR SYAMIZA (2024) Full Tensor Gradiometry (FTG) interpretation of the Offshore Penyu Basin, Malaysia. [Final Year Project] (Submitted)

Che Ali, Muhammad Anas Syazwan (2024) Evaluating the Effects of Vibrations on Jacket Platform Deck Framing System. [Final Year Project] (Submitted)

Chol Gakeer Alier, Nathaniel (2024) Predicting Employee Performance using Machine Learning. [Final Year Project] (Submitted)

Cristopher Stewart@Idris, Muhammad Azam (2024) Smart Water Tank Level Monitoring and Alert System in Labuan. [Final Year Project] (Submitted)

Chan, Mayin (2024) Effect of Silica Fume on the Properties of Class G Cement. [Final Year Project] (Submitted)

Cabir, Cabir Ismael (2024) Crude oil / water emulsion resolution using the special solvents. [Final Year Project] (Submitted)

Chong, Kenneth Yih Haur (2024) Parametric study of H2 Production from organic waste. [Final Year Project] (Submitted)

Chandrasehgaran, Neshwign (2024) Solar Microwave-Assisted Synthesis of Modified Alkaline Catalysts for Biofuel Applications. [Final Year Project] (Submitted)

Chee, Adam Tze Loong (2024) Evaluation of Carbon Capture Potential of Flue Gas from Cement Industry. [Final Year Project] (Submitted)

Chai, Joey Li Xing (2024) Development of Adsorbent for CH4 Capture. [Final Year Project] (Submitted)

Chung, Kelvin Jun Ket (2024) Predictive modeling of hydrogen production from methanol and water using photocatalytic processes. [Final Year Project] (Submitted)

Chong, Jia Yi (2024) Modeling and simulation of ammonia decomposition reactor. [Final Year Project] (Submitted)

Chung, Woon Shyen (2024) Design of Smart Indoor Air Pollution Monitoring based on Internet of Things. [Final Year Project] (Submitted)

Choong, Cheok Xuan (2024) Development of wearable resilience assessment system. [Final Year Project] (Submitted)

Cheong, Ian Yue Qian (2024) Investigation of Hydrogen PEM Fuel Cell Performance with Temperature Variation. [Final Year Project] (Submitted)

Cheah, Cheng Hooi (2024) Study of the Effect of Dust on Housing's Indoor Air Quality in Industrial Area. [Final Year Project] (Submitted)

D

Devaraju, Deepan (2024) UHostel : An Online Hostel Booking System. [Final Year Project] (Submitted)

DAMIAN ABA, SHAFIZUL ARIEFF ABA (2024) Porosity extraction from thin section images using python. [Final Year Project] (Submitted)

Daniel, Dzedryan (2024) Corrosion study of REE. [Final Year Project] (Submitted)

E

Edward, Rayan Roy (2024) Development of Smart and Portable Fruit Counting System. [Final Year Project] (Submitted)

Effendy, Mohamed Ayden Izran (2024) Non-invasive pipeline sand content monitoring in oil and gas pipeline using acoustic emission sensors. [Final Year Project] (Submitted)

F

Faizul, Ahmad Nuris Iqmal (2024) Enhancing the Learning of Computer Internal Systems Through Augmented Reality. [Final Year Project] (Submitted)

Foo, Jia Wen (2024) Delignification of oil palm empty fruit bunches using deep eutectic solvent and valorization into bioethanol. [Final Year Project] (Submitted)

Faizal Azwan, Nur Diana (2024) GPS Tagging System for SAR during Umrah & Haj. [Final Year Project] (Submitted)

Farhan Muaddi, Amir Afiq (2024) Estimation of aquaponics water quality index using artificial intelligence approaches. [Final Year Project] (Submitted)

Fazli, Farashah Farizal (2024) Performance Evaluation of Tensile, Flexural and Porosity Properties of Kenaf Core and Quarry Dust in Cement Brick. [Final Year Project] (Submitted)

Fitri, Muhammad Aiman Syazani (2024) Physical and mechanical properties changes during solid state sintering of W – Ti composition. [Final Year Project] (Submitted)

G

Gunasilan, Thaachayinie (2024) Analytics of passivated graphene field-effect transistors. [Final Year Project] (Submitted)

Ghani, Muhammad Aidid (2024) Development of wireless remote control and data monitoring for solar system using Lora / GPS HAT, Raspberry Pi 2/3, 868/915 MHz module. [Final Year Project] (Submitted)

Gumis, Marc Isaac Kalum Anak Dineal (2024) Prediction of CO2 Injectivity Changes. [Final Year Project] (Submitted)

Ghazali, Nuraina Natasha (2024) Optimization of hydrogen-rich production from methane using Ir-modified Ni-based catalysts. [Final Year Project] (Submitted)

G.Balan, Prusothman (2024) Investigation of angle orientation effect in two-phase flow in pipe. [Final Year Project] (Submitted)

Goay, Wen Khan (2024) Coupling Photovoltaic-Thermal Systems with Heat Pipes and Thermoelectric Generation for Enhanced Heat Management and Energy Efficiency. [Final Year Project] (Submitted)

H

HUAI CI, PHOEBE GONG (2024) OPTIMIZATION OF PROCESS PARAMETERS FOR HYBRID FE3O4/TIO2 NANOPARTICLES:BIOAUGMENTATION PROCESS FOR OILY WASTEWATER. [Final Year Project] (Submitted)

Hadliah, Ahmad Syafik Izwan (2024) Radio Network Planning and Performance evaluation in 5G network. [Final Year Project] (Submitted)

Harun Arashid, Muhammad Iqbal (2024) Experiments and Analysis of Biosignals for Motor Imagery Rehabilitation. [Final Year Project] (Submitted)

Hadi, Qistina (2024) A Computer-Implemented Method for Arc Flash Risk Assessment in Utility Plant Comprising High Voltage and Low Voltage Switchgear. [Final Year Project] (Submitted)

Hamzah, Ain Rabiatul Addawiyah (2024) Development of an IoT-Based Health Monitoring System for Elderly. [Final Year Project] (Submitted)

Hatta, Hairul Nizam (2024) Development of Olfaction based Mobile Robot. [Final Year Project] (Submitted)

Haja Maidin, Muhammad Nur Aiman (2024) Analysis and Classification of EEG recording of Major Depressive Disorder (MDD) and Alcohol Use Disorder (AUD). [Final Year Project] (Submitted)

Harry, Kimberly Jane (2024) Elderly Gigs: Empowering Senior Citizens through a Senior-Focused Career Platform. [Final Year Project] (Submitted)

HARIS FADILAH, NUR AINAA HAZIRAH (2024) Integrated Forecasting of Renewable Energy and Agricultural Production using LSTM, ARIMA, and Random Forest Model. [Final Year Project] (Submitted)

Hibrahim, Siti Assyahira Hibruani (2024) FYPortal: A User-Friendly Portal For Final Year Project Information and SV Availability. [Final Year Project] (Submitted)

Harudin, Mohammad Zhaffar (2024) Preliminary Techno Economic Assessment of scaled-up H2S Direct Conversion to Elemental Sulfur Using Catalytic Ionic Liquid. [Final Year Project] (Submitted)

Halmy Azam, Putri Nur 'Aisyah (2024) Study of greenhouse gas emission from flaring in oil and gas industry. [Final Year Project] (Submitted)

Humaidi, Rabbiatul Adawiyah (2024) Effect of winterization and plant phenolic-additives on the cold-flow properties and oxidative stability of biodiesel. [Final Year Project] (Submitted)

Ho, Tze Jing (2024) Synthesis of carbon-based catalyst support from rubber waste. [Final Year Project] (Submitted)

Hanafi, Aiman Hanif (2024) Novel crosslinker for carboxylated nitrile rubber. [Final Year Project] (Submitted)

Hasan Basri, Arina Amani (2024) Classification of Mild Cognitive Impairment in Senior Citizens from Blood Samples using Machine Learning. [Final Year Project] (Submitted)

Hafiz Herdev, Akmal Razif (2024) Development of Fault Detection Technique for Microgrid Protection during Grid-Connected Mode. [Final Year Project] (Submitted)

Halilol Rahman, Muhammad Mustaqeem (2024) Environmental Sustainability In Fibre-To-The-Home Design (FTTH). [Final Year Project] (Submitted)

Heng, Jun Wei (2024) Development of smart water quality control and management system. [Final Year Project] (Submitted)

Hong, Yao Cong Ivan (2024) Numerical Investigation of Geometric SCFs in Internally Ring-Stiffened Tubular X-Joints of Offshore Structures. [Final Year Project] (Submitted)

Hamdan, Muhammad (2024) Heat Map Recognition with ML in for Different Flow Regime. [Final Year Project] (Submitted)

Hasnol, Muhammad Hazim Nukman (2024) Effect of indenter geometry on the energy absorption of foam-filled honeycomb sandwich composite structures. [Final Year Project] (Submitted)

Hazri, Muhammad Eiman (2024) Testing, design and fabrication of test rig for vortex gravitational hydroelectric system and parameters study the related parameters. [Final Year Project] (Submitted)

Husin, Muhammad Ibrahim Hakimi (2024) Investigation of Single-Component Epoxy Resin System for Sand Consolidation. [Final Year Project] (Submitted)

I

Idris, Nurul Nabihah (2024) Dynamic Modelling for a liquid flow system. [Final Year Project] (Submitted)

Ibrahim, Fatin Nur Afiqah (2024) Investigation of techniques to mitigate the problem of class imbalance in Cognitive Frailty classification. [Final Year Project] (Submitted)

Iman, Wan Muhammad (2024) A Laundry Service Mobile Application (U-Wash) for UTP Students. [Final Year Project] (Submitted)

Ismadi, Muhammad Arif Hakimi (2024) MetaSafelabs: Virtual Environment Development for Laboratory Safety Training and Awareness. [Final Year Project] (Submitted)

Ismadi, Syasya Afiqah (2024) Characterization of shale formation for CO2 potential storage. [Final Year Project] (Submitted)

Ishak, Nur Irdina (2024) Development and characterization of zeolite adsorbent for direct air capture. [Final Year Project] (Submitted)

Ismail, Nurul Izni (2024) Automatic Solvent Composition Determination for Acid Gas Removal Unit Using Artificial Intelligence. [Final Year Project] (Submitted)

Izam, Muhamad Ameer (2024) Onshore NW Peninsular Malaysia Geophysical Exploration Integrated Seismic Refrection and TEM. [Final Year Project] (Submitted)

J

JOHNSON, TIMOTHEOUS (2024) EFFECT OF HYDROGEN SULFIDE ON THE OVERALL ECONOMIC POTENTIAL FOR OFFSHORE CO2-NATURAL GAS SEPARATION: PROCESS SIMULATION STUDY. [Final Year Project] (Unpublished)

JAMIL, IBRAHIM MUHAMMAD (2024) INNOVATIVE SLUDGE TREATMENT WHICH FORMS IN CRUDE OIL TANKS BY HEATING AND CHEMICAL DOSING. [Final Year Project] (Submitted)

John, Aileen John Anak Wilfred (2024) Design a portable walkie talkie based on Arduino. [Final Year Project] (Submitted)

Jusli, Nurin Aqilah (2024) Automated Check-In: Enhancing Student Attendance System. [Final Year Project] (Submitted)

Jahjahah, Mohamad Arif (2024) Intrusion Detection System Prediction System using Machine Learning. [Final Year Project] (Submitted)

Jamal Mohamad, Muhammad Hazim (2024) In & Out. [Final Year Project] (Submitted)

Johnsan, Thievalson (2024) Enhanced/Customizable integration of Virtual Reality(VR) gamification to help kids with dyslexia on object identification and spatial awareness. [Final Year Project] (Submitted)

JOHN, ELIZABETH INTEK ANAK (2024) AVO and Seismic Inversion application for Hydrocarbon exploration. [Final Year Project] (Submitted)

Jaidin, Sahrman (2024) Effect of superplasticer in the properties of oil well cementing. [Final Year Project] (Submitted)

Justin, Weallfearnius (2024) Effect of Monoetheleneamine (MEA) concentration and temperature on material corrosion during CO2 capture: electrochemical and weight loss analysis. [Final Year Project] (Submitted)

Jintony, Micah Simanil (2024) Integration of safety instrumented system with automated HAZOP analysis. [Final Year Project] (Submitted)

Jack, Tiffany Trixie Anak (2024) Choline Chloride–Oxalic Acid-Impregnated Resins for Separation of Cerium/Lanthanum/Neodymium in Sulfate Media Solution via Ion Exchange Setup. [Final Year Project] (Submitted)

Johan, Ahmad Fikri (2024) Simulation & Sensitivity Analysis of CO2 capture using various adsorbent for direct air capture (DAC) applications. [Final Year Project] (Submitted)

Jusoh, Alia Najiha (2024) Geopolymer - liquid natural rubber adsorbent as cold-bonded lightweight aggregates for efficient dye removal. [Final Year Project] (Submitted)

Jeevan, Natasha Voznyuk (2024) CFD modelling to predict fire escalation and propagation between fuel storage tanks in petroleum plants. [Final Year Project] (Submitted)

Johari, Muhammad Amirun Tasnim (2024) Desulphurization of waste tyre pyrolysis oil and its effect towards diesel engine fuel delivery metal degradation. [Final Year Project] (Submitted)

JEGANATHAN, NURJULIA MOHD JAILAM (2024) Karst Geohazard Mapping: Conventional Vs Machine Learning In Geoscience. [Final Year Project] (Submitted)

Javed Ahmad, Akil Akhtar (2024) Numerical study of wave kinematics beneath extreme waves. [Final Year Project] (Submitted)

K

KHAIRUL EMRAN, HARITH ILHAM (2024) DEVELOPMENT FRAMEWORK FOR CARBON EMISSION (SCOPE 1 AND SCOPE 2) FROM WASTE MATERIAL RECYCLING PROCESSES. [Final Year Project] (Submitted)

KARIMOV, NAIL (2024) SYNTHESIS AND THEORETICAL INSIGHT ON THE INTERACTION BETWEEN UIO-67 AND IONIC LIQUID. [Final Year Project] (Submitted)

Khor, Gee Pei (2024) Comparative Analysis of Deep Learning Approaches for Predicting EV Charging Station Loads: Spatial, Temporal, and Spatiotemporal Perspectives. [Final Year Project] (Submitted)

Karamudin, Muhd Ameerudin (2024) Classification of corrosion severity levels from acoustic emission data using machine learning. [Final Year Project] (Submitted)

Khalil, Muhammad Amin (2024) Knowledge Nexus: Empowering Students through Peer to Peer Learning and Income Generation. [Final Year Project] (Submitted)

Ku Adri Azhan, Ku Muhammad Danial (2024) Mobile App-Centric Authorization System for NFC-Intergrayed Locking Mechanism. [Final Year Project] (Submitted)

Khiril Anuar, Muhammad Haziq (2024) Intrusion Detection and Prevention System for Detecting and Preventing Telegram Bots. [Final Year Project] (Submitted)

Kumar, Padthmaruben (2024) Smart Flood Detection System. [Final Year Project] (Submitted)

Khamaruzaman, Abdul Latiif (2024) SigniFy: Simplifying Sign Language Learning Through Augmented Reality. [Final Year Project] (Submitted)

Khairol Tajaldin, Afeef Shazril (2024) A Machine Learning Approach to Song Genre Classification. [Final Year Project] (Submitted)

Kamarul Azril, Shamel Daniel (2024) Economic Viability for Rare Earth Element Mining using Machine Learning. [Final Year Project] (Submitted)

Kumar, Satganessh Suria (2024) Geotechnical Properties of Basalt Rock in Kuantan, Malaysia. [Final Year Project] (Submitted)

KRISHNAN, JEEVAN VARRMA (2024) Child Safety App. [Final Year Project] (Submitted)

Khair, Emir Danial (2024) UNIVERSITY STUDENT BUSINESS PROMOTION PLATFORM (uBiz) for UTP Student. [Final Year Project] (Submitted)

Khan, Mohammad Fayez (2024) AR APPLICATION FOR VISUALLY IMPAIRED PEOPLE (VIP). [Final Year Project] (Submitted)

Kamarozaman, Ahmad Aqil Awwab (2024) Investigation of Biopolymer Assisted Enzyme Induced Calcium Carbonate Precipitation (EICP) for Sand Consolidation Treatment. [Final Year Project] (Submitted)

Kim, Qian Tan (2024) Carbon dioxide storage capacity estimation for depleted oil reservoir. [Final Year Project] (Submitted)

Kong, Chi Chai (2024) Green solvent delignification of durian seed wastes for gum-based food coating. [Final Year Project] (Submitted)

K Gopala Krishnan, Thivyalakshmi (2024) Process simulation of adsorption process in gas separation. [Final Year Project] (Submitted)

Khairul Anuar, Nur Khairina (2024) Production of silver nanoparticles from macroalgae (seaweed) for potential photocatalytic dye removal. [Final Year Project] (Submitted)

Kong, Victor Wei Jing (2024) Study on the potential of microalgae cultivation for electricity and lipid production. [Final Year Project] (Submitted)

Kamarulzaman, Kamalina (2024) Process Simulation and Techno-Economic-Environment Assessment of Cryogenic Process in Industrial Application. [Final Year Project] (Submitted)

Kueh, Aubrey Wee Suang (2024) Investigation of Kinematic Trajectory for Harvester Robot Arm. [Final Year Project] (Submitted)

Kui, Ping Liong (2024) Automated Grading of Mango using Machine Learning. [Final Year Project] (Submitted)

Khor, Chun Sheng (2024) Prediction of Irregularities in Condensate Measurements using Deep Learning Network. [Final Year Project] (Submitted)

Kunasekaram, Kavinesh (2024) Hybrid Nanoparticles Reinforced Cooling Fluid for Effective Thermal Management in Electric Vehicle Battery. [Final Year Project] (Submitted)

Krishnamorthy, Sugenesh Asari (2024) EXPERIMENTAL STUDY ON MEASUREMENT OF CORROSION RATE ON GALVANIZED CARBON STEEL WHEN EXPOSED TO SOIL AND SALT WATER IN VARIOUS TEMPERATURE AND TIME DURATION. [Final Year Project] (Submitted)

Khan, Mohammad Fayez (2024) AR Application for Visually Impaired People (VIPs). [Final Year Project] (Submitted)

Kamil, Mochamad Zidan Aqila (2024) Linear Regression Model. [Final Year Project] (Submitted)

Khairolnezam, Iman Ezrai (2024) Framework for Effective Planning of Operation and Maintenance in Oil and Gas Industry. [Final Year Project] (Submitted)

L

Lim, Hui Si (2024) Type 20Diabetes Mellitus Managememt App. [Final Year Project] (Submitted)

Lim, Chin Yuan (2024) Cloud Architecture for Unveiling Business News Insights with Topic Modelling and Sentiment Analysis. [Final Year Project] (Submitted)

Loganathan, Kumarendren (2024) Stability and viscoelastic behavior of a Polyacrylamide Polymer with the crosslinker: Experimental Investigation. [Final Year Project] (Submitted)

Liew, Lih Xuan (2024) Development of Bentonite Composite Adsorption for Heavy Metal Removal. [Final Year Project] (Submitted)

Lim, Xin Ying (2024) Introduction of ethanol ammonium butyrate [EtOHA][BA] Ionic Liquid into rubber-seed shell based activated carbon for high CO2 removal. [Final Year Project] (Submitted)

Lee, Emily Min Xuan (2024) Optimization using Particle Swarm Optimization (PSO) Algorithm with Python language. [Final Year Project] (Submitted)

Low, Yi Xun (2024) Valorization of Anaerobic Digestion Nutrient-Rich Effluents by Progressive Freezing. [Final Year Project] (Submitted)

Lau, Cindy Jen Ding (2024) Molecular Simulation of Amino Acid Ionic Liquids Decorated Silica/Polyimide Mixed Matrix Membrane for CO2 Removal from CH4. [Final Year Project] (Submitted)

Lee, Maxwell Kim Hao (2024) Machine Learning-based Vehicle Crash Detection and Alert System. [Final Year Project] (Submitted)

Lee, Zhuo Xuan (2024) EEG Analysis and Modeling of Motor Imagery for Rehabilitation. [Final Year Project] (Submitted)

Liang, Yi Khai (2024) Development of IoT sensor for detection of land slides. [Final Year Project] (Submitted)

Leslie Ramsay, Mary Ilyona Anak (2024) FEM Analysis of PDC Drill Bit Cutter Efficiency Designed for Interbedded Formation Drilling. [Final Year Project] (Submitted)

LIEW, YOONG WEI (2024) Numerical Analysis of The Thermal Storage Density and Specific Heat Capacity of a Thermal Energy Storage Using Ionic Liquid-based Nanofluid. [Final Year Project] (Submitted)

Lee, Mohammad Ezlii Erzuan (2024) Performance Analysis of Thermal management system of Electrical Vehicle Battery using Heat Pipe. [Final Year Project] (Submitted)

Lee, Yong Hong (2024) Photovoltaic Panel Integrated with Solar Tracker and Fins as Passive Cooling System. [Final Year Project] (Submitted)

Ling, Kelvin Zhong Xian (2024) Development of Tungsten-Copper Alloy for Improved Thermal Performance at High Temperature Applications. [Final Year Project] (Submitted)

Lobojo, James Lugor Taban (2024) CampusConnect: Peer Tutoring Application. [Final Year Project] (Submitted)

M

MOORTHY, JAYA SATHIVELLAN (2024) STUDY OF DYE REMOVAL VIA RADIATION TECHNOLOGY. [Final Year Project] (Submitted)

MUHAMAD SABIR, HAZIQAH AUNI (2024) DETERMINATION ON EFFECT OF ENZYMATIC HYDROLYSIS AND FERMENTATION CONDITION IN PHA PRODUCTION. [Final Year Project] (Submitted)

MOHAMAD NAS, MUNNA FARRA SOFEA (2024) GAS HYDRATE BASED DESALINATION. [Final Year Project] (Submitted)

MOHD NIZAM, NURUL IZZAH (2024) LA AND Y CRYSTALIZATION BY USING PHYTOCHEMICAL BASED REDUCTION AGENT. [Final Year Project] (Submitted)

MOHAMAD FEZAR, MUHAMMAD NAQIYUDDIN (2024) HYDROGEN PRODUCTION FROM PLASTIC WASTE. [Final Year Project] (Submitted)

MOHD NAZRIN, NUR ARIFAH (2024) DEVELOPMENT OF CRADLE TO GRAVE LIFE CYCLE ASSESSMENT (LCA) FOR SUSTAINABLE AGRICULTURE PLANTING. [Final Year Project] (Submitted)

MIGUEL, RUI (2024) MODELLING OF LIFE CYCLE ASSESSMENT FOR HYBRID CULTIVATION AND HARVESTING SYSTEMS OF MICROALGAE TO BIOFUELS. [Final Year Project] (Submitted)

MOHD ARIS, NURUL JANNATTI MAISYARAH (2024) LIFE CYCLE ASSESSMENT OF BIOLUBRICANTS PRODUCTION FROM UCO AND PALM-BASED FEEDSTOCK. [Final Year Project] (Submitted)

MANHIQUE, ECKSON (2024) FEASIBILITY STUDY OF RECYCLING SYSTEM DESIGN FOR EO PRODUCTION FOR ENHANCED SELECTIVITY. [Final Year Project] (Submitted)

MASZELAN, MUHAMMAD ADZMIL (2024) OPTIMIZATION OF GLYCERIN PURIFICATION FOR HIGH QUALITY HAIR CARE PRODUCT. [Final Year Project] (Submitted)

MOHAMAD REDZUAN, NURUL FARAH NAZWA (2024) PURIFICATION OF RESIDUAL GLYCEROL RECOVERED FROM BIODIESEL PRODUCTION. [Final Year Project] (Submitted)

MURTHY, SHARVINA (2024) MULTIPHYSICS MODELLING OF ALKALINE WATER ELECTROLYSIS FOR A POWER-TO-HYDROGEN PRODUCTION. [Final Year Project] (Submitted)

Musa, Mohammad Indra Khuzzaimi (2024) A digital twin and 5G network solution for an industry application. [Final Year Project] (Submitted)

Mohamad Nazri, Mohamad Haziq (2024) Direct-drive linear motor for air vapor compressor air conditioning system. [Final Year Project] (Submitted)

Mohamad Zuki, Muhammad Hilman (2024) Development of Emergency Portable Ventilator. [Final Year Project] (Submitted)

Muhammad Alif Weerak, Nur Dhaifina Zafirah (2024) Fractional-order Neural Network for Prediction and Forecasting of Global Horizontal Irradiance. [Final Year Project] (Submitted)

Mohammad Kassim, Mohammad Fadhil Umair (2024) Energy Management System for Standalone Photovoltaic Systems Using Battery-Supercapacitor Hybrid Energy Storage. [Final Year Project] (Submitted)

Mohd Zahwan, Nurul Syafika Huda (2024) Investigation of SiC and GaN based Traction Inverter Performance in Electric Vehicle Drive Application using PLECS. [Final Year Project] (Submitted)

Mahmud, Muhammad Fikri 'Izzat (2024) Energy Management System (EMS) for Hybrid Renewable Power Generation. [Final Year Project] (Submitted)

Munusamy, Surendren (2024) Development of Low-Cost Raman Spectrometer for Liquid Substance Identification. [Final Year Project] (Submitted)

Mohamad Razali, Mohamad Izzad (2024) Deployment of Machine Learning Algorithm on Rasberry Pi for Classification of MDD from EEG Signals. [Final Year Project] (Submitted)

Mohamed, Muhamad Farhan Rais (2024) Development of 5G Cloud Platform for IoT of RAS (Recirculating Aquaculture system). [Final Year Project] (Submitted)

Mustaza, Syafiah Najwa (2024) Intellectual Property Advisory Platform: Integrating Recommendation Chatbot for IP Rights. [Final Year Project] (Submitted)

Mohd Norijasmi, Mohamad Aiman (2024) Food Recognition and Nutrition Analysis Application. [Final Year Project] (Submitted)

M Mathivanan, Lenuga (2024) MetaShield: Implementing Cybersecurity Awareness among UTP students during O’Week. [Final Year Project] (Submitted)

Mok, Wen Xuan (2024) Machine Learning Model for Air Quality Index Prediction. [Final Year Project] (Submitted)

Mohd Khairi, Ahmad Haikal (2024) Augmented Reality for Smart Coffee Farming: Detecting and Managing Coffee Rust in Coffee Plants. [Final Year Project] (Submitted)

MOHD YAZID, NUR BALQIS VANEESA (2024) Predictive Analytics with Data Visualization for Optimal Financial Management in Corporate Environment Using Machine Learning. [Final Year Project] (Submitted)

MAZWAN, MAIZURAH (2024) Mobile Application for Fruit Ripeness and Quality Grading Detection. [Final Year Project] (Submitted)

Mohd Ali Hanafiah, Izazi Rafiqah (2024) BabyBeacon: Automated Detection and Alert System for Unattended Infants in Vehicles. [Final Year Project] (Submitted)

Mohd Hamdan, Muhammad Aiman Hafiz (2024) Empowering Diabetics with Comprehensive Dietary Solutions for Sustainable Caloric Deficit Management. [Final Year Project] (Submitted)

Mohd Rusli, Muhammad Falikh Farhan (2024) SPEECHBOOST APPS: DEVELOPMENT OF SPEECH DELAY AIDS FOR KIDS. [Final Year Project] (Submitted)

Mohd Rosli, Ikmal Haikal (2024) ARFocusTherapy: Developing Augmented Reality Application for ADHD Children. [Final Year Project] (Submitted)

MOHD FAIZAL, AHMAD FADHLI (2024) Descriptive and Predictive Analytics for Food Price Trends Using Forecast Function. [Final Year Project] (Submitted)

Mohamed A'azam, Sarah Nasuha (2024) ProDrive - Video Processing for Enhanced Driving Safety. [Final Year Project] (Submitted)

Mohayadin, Muhammad Amirul Afiq (2024) Smart parking system. [Final Year Project] (Submitted)

Mohd Razak, Nur Izzatul Umaira (2024) Development of IOT Based Wastewater Monitoring System for Industrial Applications. [Final Year Project] (Submitted)

Muralindran, Kartigeindran (2024) Automated Approval Workflows: Enhancing Efficiency in University Processes using Power Automate. [Final Year Project] (Submitted)

Mohd Ariff, Irfan (2024) ChordWise: Enhancing Guitar Chords Learning through Augmented Reality. [Final Year Project] (Submitted)

Mohd Halim, Nor Amirah Hani (2024) LearnFlow: Automated Proactive Alerts & Self-Reflection Tool. [Final Year Project] (Submitted)

Muhammad Farid, Muhammad Faris Ilhan (2024) Optimization of Classroom Schedule. [Final Year Project] (Submitted)

MOHD NOR, NOR NADIRAH (2024) Petrographic study on the diagenetic features in the limestone of Gua Musang Fromation, Gua Musang, kelantan. [Final Year Project] (Submitted)

MOHAMAD ASHRAF, NURUL HADIRAH (2024) Depositional Modeling of Kapuni Field: A Strategic Approach to Reservoir Characterization in the Taranaki Basin. [Final Year Project] (Submitted)

MOHD ADNAN, MUHAMMAD AMMAR (2024) Characterization of basaltic formations for CO2 storage. [Final Year Project] (Submitted)

M. Ariffin, Kamilah Izzuani (2024) Cost Assessment of Building Information Modelling (BIM) in Construction Projects. [Final Year Project] (Submitted)

Muhammad Taddit, Muhamad Zulfikar (2024) Design and Development of Floating Wetlands. [Final Year Project] (Submitted)

Mohd Surajim, Ahmad Yaasin (2024) Mobile Application For Car And Motorcycle Rental Services In UT. [Final Year Project] (Submitted)

Mhamod, Nur Aqelah (2024) Determination of Inkjet Carbon as an Emulsifier through Stability Screening and Rheological Analysis. [Final Year Project] (Submitted)

Mat Rozaidi, Noor Ain Natashah (2024) Toxicity screening of Green Pickering Emulsions to be utilized for production optimization. [Final Year Project] (Submitted)

Md Saidin, Muhammad Firdaus (2024) Surface morphology analysis of the effect of alkanolamines concentration on piping corrosion during CO2 capture. [Final Year Project] (Submitted)

Mohd Fauzi, Nur Aminah Solehah (2024) Effect of Hydrate on Corrosion Formation in Oil and Gas Pipeline. [Final Year Project] (Submitted)

Murugesu, Muvendran.N (2024) Screening and design biocompatible and biodegradable ionic liquids using COSMO-RS for food industries. [Final Year Project] (Submitted)

Mohamad Zaidi, Mohamad Danial (2024) Molecular architecture of GOF for CO2 adsorption. [Final Year Project] (Submitted)

Mohd Fakhrurrozie, Nur Athirah Munirah (2024) Multi objective optimization of CO2 utilization process. [Final Year Project] (Submitted)

Mohd Fuzi, Nurin Faqihah (2024) Consequence study of accident scenarios for liquid hydrogen release. [Final Year Project] (Submitted)

May, Leesa Welson (2024) Evaluation of Scope 1 and Scope 2 emissions for biorefinery-based production of paper pulping industry via life cycle analysis. [Final Year Project] (Submitted)

Mohamad Sukri, Aida Maisarah (2024) Agriculture waste for dye removal. [Final Year Project] (Submitted)

Mohamad Yusof, Nur Atiqah Syazni (2024) Potential of zeolite adsorbents with hierarchical structures for gas separation. [Final Year Project] (Submitted)

Mat Said, Nurul Sa'eidah (2024) Mathematical modelling of multi-component gas separation process via membranes. [Final Year Project] (Submitted)

Mohd Zaid, Muhammad Hasif (2024) Automated Solvent Component Determination for Acid Gas Removal Unit Using Artificial Intelligence. [Final Year Project] (Submitted)

Mat Sarib, Nor Sofia Afifah (2024) Thermal modelling analysis of lithium ion battery. [Final Year Project] (Submitted)

Mohd Pauzi, Muhammad Iman Aiman (2024) Establishing a GHG/Carbon Risk Matrix for Industry Climate Risk Management. [Final Year Project] (Submitted)

Md Romzi, Mohamad Akil Najmi (2024) Comparison of Simultaneous/Separated Hydrolysis & Fermentation processes using enzyme and dry yeast for optimization of bioethanol production from oil palm empty fruit bunch. [Final Year Project] (Submitted)

Mohd Zaib, Nur Athirah (2024) Amine-Impregnated of Silica Nanocapsules Adsorbent for CO2 Capture. [Final Year Project] (Submitted)

Mohamad Tharmizi, Thaza Amsyar Izzati (2024) Quantitative Risk Assessment at Hydrogen Processing Facility. [Final Year Project] (Submitted)

Mansor, Muhammad Al- Imran (2024) Electrochemical-Assisted recovery of neodymium and dysprosium from end-of-use Magnets. [Final Year Project] (Submitted)

Mohd Suhaini, Nur Sara Safiah (2024) Production of Biodiesel from Waste Cooking Oil using Microwave Irradiation and Sulphonated Iron Catalyst with Activated Carbon Support. [Final Year Project] (Submitted)

Misran, Nurul Asyikin (2024) Production of Biodiesel from Waste Cooking Oil using Calcium doped in Activated Carbon support. [Final Year Project] (Submitted)

Mohd Yusof, Amir Yusri (2024) Biomass-based porous carbon synthesis via a hydrothermal carbonization & activation process. [Final Year Project] (Submitted)

Muhd Najib, Asymal Hayati (2024) Evaluation of storage technologies for hybrid power systems via Automated Targeting Modeling. [Final Year Project] (Submitted)

Mohd Halmy, Muhammad Aidan (2024) Energy-water-carbon nexus study for optimal design of integrated energy-water system using Automated Targeting Modeling. [Final Year Project] (Submitted)

Mohd Asmawi, Nur Izzati Fikriyah (2024) Study of wound dressing properties made of kenaf cellulose. [Final Year Project] (Submitted)

Mohammed Hanafi, Nur Syifaa Nabihah (2024) Study of PHA from biobased (ananas) and synthetic plastic wastes. [Final Year Project] (Submitted)

Masdi, Danial Aiman (2024) Kinetic and thermodynamic evaluation of Methylene blue adsorption using activated carbon/CNT/hydrogen titanate nanotubes (HTNT) composite. [Final Year Project] (Submitted)

Mohammad, Muhamad Azizul Hafiz (2024) Development of LoRa Mesh Networking System. [Final Year Project] (Submitted)

Muhamad Ismail, Liana (2024) IOT based Smart Agriculture Monitoring System. [Final Year Project] (Submitted)

Mohd Shaipul, Muhammad Aiman Haqiemi (2024) Cooperative Payload Transportation Using Dual-Tello EDU Quadrotor Drones. [Final Year Project] (Submitted)

Mohamed Sadik, Muhammad Aidi Farhan (2024) Fractional-ordering of Model Predictive Control for Process Plants Robust Performance. [Final Year Project] (Submitted)

Mansor, Faisal Nasif (2024) Speeding and Distance Tracking System. [Final Year Project] (Submitted)

Mohd Radzi, Noor'Izni Zafirah (2024) Alcoholic Detection using Effective Connectivity of EEG Signals and Deep Learning Transformer Model. [Final Year Project] (Submitted)

Mohd Jefri, Muhammad Faris Aiman (2024) Development of portable pico-scale hydro generator using Archimedes screw method. [Final Year Project] (Submitted)

Mohd Suhaimi, Muhammad Aiman (2024) Python Based Virtualization and Reporting Package. [Final Year Project] (Submitted)

Mohamad Sapawi, Mohamad Dzul Airie (2024) Failure Prediction of Corrosion in Pipeline Infrastructures using Decision Tree Regression. [Final Year Project] (Submitted)

Misnan, Muhammad Khairul Ikhwan (2024) MyGlukosa: Development of Dietary Tracking Mobile Application for Diabetic Patients. [Final Year Project] (Submitted)

Mohd Hanif, Muhammad Zharif Mifdhal (2024) CFD modelling of heat sinks thermal boundary layer effect on cooling of electronic components. [Final Year Project] (Submitted)

Muhamad Nasir, Muhammad Haniff (2024) Biodiesel synthesis from Soldier Larvae Lipid as palm-oil wastes reuse and reduce measures. [Final Year Project] (Submitted)

Moo, Su Min (2024) Investigation of using contactless vision-based method for vibration monitoring. [Final Year Project] (Submitted)

Mohd Ali, Muhammad Izzat (2024) Reliability, Availability and Maintainability (RAM) Study on Offshore Crane. [Final Year Project] (Submitted)

Mohd Rizal, Muhammad Iirffan (2024) Exploring Strategies to Promote Electric Vehicle Adoption in Malaysia. [Final Year Project] (Submitted)

Mohd Shaibi, Ahmad Bakhtiar (2024) Optimizing the Techno-Economic Performance of Photovoltaic Systems for Hydrogen Production and Electric Vehicle Charging Stations: A Comparative Analysis Under Three States in East Malaysia. [Final Year Project] (Submitted)

Mohamed Muzamil, Muhammad Shalihin (2024) Corrosion mechanism of copper exposed to sulphide environment containing dissolved CO2 and N2 gaseous. [Final Year Project] (Submitted)

Mohamad Farid, Amirul Firdaus (2024) Simulation of a liquid-cooling system for the battery thermal management. [Final Year Project] (Submitted)

Mohd Sabien, Nur Ain Shafizah (2024) Performance Investigation of Solar-Wind Hybrid System for Small-Scale Pond Aeration. [Final Year Project] (Submitted)

Mohmad Azman, Muhammad Amir Fitri (2024) Performance Evaluation of Compressive Strength, Density and Water Absorption Properties of Kenaf Core and Recycled Concrete in Cement Brick. [Final Year Project] (Submitted)

muhamad hadriq affandie, muhammad haikal hakimi (2024) Effect of moisture absorption on mechanical performance of polymer composite. [Final Year Project] (Submitted)

Mohamad Zahir, Muhammad Amirrul Nurrazzi (2024) Virtual Reality Model for Pipeline Isolation Plug. [Final Year Project] (Submitted)

Mustafa, Muhammad Zhafir Waqiyuddin (2024) Reliability prediction of pipelines subjected to Naphthenic Acid Corrosion. [Final Year Project] (Submitted)

Mohd Zaki, Hazirah Husna (2024) Development of cantilever beam fibre Bragg grating (FBG) based geophone with temperature compensation. [Final Year Project] (Submitted)

Mohd Fikri, Muhammad Afif Mustaqim (2024) Performance efficiency of vortex gravitational hydroelectric casing shape. [Final Year Project] (Submitted)

Mohammad Mokhtar, Muhammad Fawwaz Ezzat (2024) Turbine performance and efficiency for vortex gravitational hydro electric. [Final Year Project] (Submitted)

Mohd Roslan, Muhammaf Firdaus (2024) Investigation of mechanical field weakening for radial flux permanent magnet motor for retrofit marine hybrid electric propulsion system. [Final Year Project] (Submitted)

Mohd Fakharurazi, Aiman Aqmal (2024) Study of Flame Hydrogen at Ambient Pressure. [Final Year Project] (Submitted)

Mohd Nasaruddin, Arif Hafizuddin (2024) Nanoyarn Developemnet using Nanomanufacturing. [Final Year Project] (Submitted)

MOHD BAKRI, MUHAMMAD RIE RAIHAN (2024) Diagenesis alteration of carbonate rock in Pahang Areas. [Final Year Project] (Submitted)

MOHD NOOR AIDI, MUHAMMAD NOOR AIMAN (2024) Source rock assessment and HC potential of Jurassic-Cretaceous shales from Onshore Johor Areas. [Final Year Project] (Submitted)

MUSTAFA, HASREQ ISKANDAR (2024) Innovative Copper Cylinder Design and Method for Enhanced Geophysical Acquisition. [Final Year Project] (Submitted)

MAGHRIB, ALYA BATRISYIA (2024) Potential Karst as Carbon Storage through VR Model Development and Evaluation. [Final Year Project] (Submitted)

MUKHLISA, SYIFA (2024) CO2 Sequestration in coal seams - Rocks adsorption properties study. [Final Year Project] (Submitted)

MOHAMAD BAHTIAR, NAJWA ZAWANI DHAMIRAH (2024) Prediction of the Vertical Distribution of Fracture-Karst Porosity within the Jintan-3 Well. [Final Year Project] (Submitted)

mohd surajim, Ahmad yaasin (2024) Mobile Application For Car And Motorcycle Rental Services In UTP. [Final Year Project] (Submitted)

Mohd Nasir, Nur Hanani (2024) Numerical Investigation on Hydrokinetic Turbine Performance under Varying Ocean Currents Flow Velocities. [Final Year Project] (Submitted)

Mohd Rusdi, Nur Nasuha (2024) Vibration Analysis of a Jacket Platform Deck Subjected to Dynamic Actions Induced by Mechanical Equipments. [Final Year Project] (Submitted)

Mat Shaari, Muhammad Faisal (2024) Framework for effective quality management for construction oil and gas projects. [Final Year Project] (Submitted)

Mahadi, Ummu Habibah Ramlah (2024) Geotechnical analysis of a semi-circular breakwater used for mangrove protection against coastal waves. [Final Year Project] (Submitted)

Mohd Nasir, Munirah Nurfatihah (2024) Optimization of Alkaline Electrolysis System for Hydrogen Production: A Simulation Study. [Final Year Project] (Submitted)

N

NOOR IZIR, MUHAMMAD TAUFIQ HIDAYAT (2024) SYNGAS PRODUCTION VIA BI-REFORMING OF METHANE. [Final Year Project] (Submitted)

Nordin, Muhammad Redza (2024) Performance evaluation of online fake reviews of products using Machine Learning models. [Final Year Project] (Submitted)

Nor Hisyam, Amir Ahmad Shakir (2024) Analysis of Phasor Measurement Unit (PMU) application in Distribution Networks for Real Time Monitoring. [Final Year Project] (Submitted)

Nadarajan, Kavishinie (2024) VirtualVogue: AR Cloth Try-On Revolution App. [Final Year Project] (Submitted)

Norhisham, Hani Sabrina (2024) Interactive E-Learning Training Platform for NIOSH Modules. [Final Year Project] (Submitted)

Norhisham, Hani Sabrina (2024) Interactive E-Learning Training Platform for NIOSH Modules. [Final Year Project] (Submitted)

Nizam, Ahmad Aiman Hakimi (2024) Hybrid CNN-Random Forest for Malware Detection. [Final Year Project] (Submitted)

NOR HAMLI, MARYAM NURKHALISAH (2024) An analysis of karst features in the carbonate platform of Central Luconia Province using seismic multiattribute: A case study. [Final Year Project] (Submitted)

Nor’ Azman, Iman Nayli Sofiya (2024) DIET-OUT: AI Diet & Workout Consultant Mobile Application. [Final Year Project] (Submitted)

Noor Akmar Shah, Muhammad Bazly (2024) Characterization of shale formation for CO2 potential storage. [Final Year Project] (Submitted)

Nguku, Anita (2024) Formation damage during CO2 injection. [Final Year Project] (Submitted)

Ng, Agnes Xin Hui (2024) Influence of Active Metal on Alumina Supported Catalyst on Methanol Selectivity & Yield in CO2 Hydrogenation Application. [Final Year Project] (Submitted)

Nik Salehuddin, Nik Abdul Azeem (2024) To predict the mixed gas adsorption isotherms based on single-component adsorption isotherms using IAST. [Final Year Project] (Submitted)

Ngu, Chii Ong (2024) Development of UV-GOF for CO2 Adsorption. [Final Year Project] (Submitted)

Naoudzmin, Nashrie Izuwan (2024) Development of hazard prediction method health exposure to nanomaterials. [Final Year Project] (Submitted)

Nurul Azmi, Muhammad Rasyid (2024) Experimental investigation of the minimum auto-ignition temperature of selected dust. [Final Year Project] (Submitted)

Nyipa, Alexson De Anak (2024) LiDAR Corrosion Data Rendering and Classification Using Artificial Intelligence. [Final Year Project] (Submitted)

Noor Affandy, Sarah Farina (2024) Fabrication of SPEEK composited with Silica-modified IL for H2 production via proton exchange membrane water electrolysis. [Final Year Project] (Submitted)

Norhisham, Muhammad Daniel Haziq (2024) Development Of Automated Robotic Arm System For PCB Diagnostics In Electronics Industry Applications. [Final Year Project] (Submitted)

Ng, Wai Kean (2024) Virtual calibration for liquid flow meter calibration for oil and gas industry. [Final Year Project] (Submitted)

Noor Azmi, Mohammad Haziq Hakimi (2024) Home Solar Assessment Tool. [Final Year Project] (Submitted)

Najihah, Izzatie (2024) Failure Pressure Prediction of an API 5L X120 Pipe Elbow with Circumferentially Aligned Interacting Corrosion Defects Subjected to Internal Pressure. [Final Year Project] (Submitted)

Nerat, Amanda Jane (2024) Investigating the effect of bioethanol towards fuel delivery metal corrosion and elastomer degradation. [Final Year Project] (Submitted)

Norizan, Muhammad Nor Isyraf (2024) Removal of pollutants from wastewater using nOPLAC. [Final Year Project] (Submitted)

O

Ong, Wei Ling (2024) Deep Learning-based Algorithms for Malaysian Food Image Recognition and Calories Estimation for Diabetes Management. [Final Year Project] (Submitted)

OMAR BAKHTIAR, ALYAA BATRISYIA (2024) BEAUT@UNI – SALON SERVICE APPLICATION. [Final Year Project] (Submitted)

Othman, Ahmad Harith (2024) Hotspot Growth Prediction for Photovoltaic Panel of Large Scale Solar Farm using Artificial Intelligence. [Final Year Project] (Submitted)

Osman, Muhammad Iskandar Najmi (2024) Desulphurization of waste tyre pyrolysis oil and its effect towards diesel engine fuel delivery elastomer degradation. [Final Year Project] (Submitted)

Ooi, Wei Di (2024) Double-Passed Solar Air Collector with Metal Foam Matrix Integrated Storage System. [Final Year Project] (Submitted)

Ong, Kai Je (2024) The effects of spray distance on the mechanical properties of Thermal Barrier Coating on 316 SSL developed by thermal flame spray. [Final Year Project] (Submitted)

Omondi, Marcell Michael Akumu (2024) Steel-concrete composite deck slabs with high performance concrete core. [Final Year Project] (Submitted)

P

POSA, MUHAMMAD IQMALUDDIN (2024) OPTIMISATION OF CATALYTIC REFORMING UNIT (CRU-1) AND THE PROCESS UNITS INVOLVED. [Final Year Project] (Submitted)

Poh, Ching Hong (2024) H2 Production Enhancement Using ZnO/BiVO4 and Carbon Quantum Dots. [Final Year Project] (Submitted)

Pelembe, Edson Joao (2024) Development of Sustainability Quantification Assessment for the Natural Rubber Industry. [Final Year Project] (Submitted)

Pathooraman, Aqilah (2024) Thermodynamic properties of freeze crystallization of high-salt wastewater. [Final Year Project] (Submitted)

Parvinder Singh, Jasleender Kaur (2024) Adsorption behaviour of methane onto carbonaceous adsorbent into microporous polymers. [Final Year Project] (Submitted)

Puteri, Auni Maisarah (2024) Study of alcohol components from ananas via enzymatic process. [Final Year Project] (Submitted)

Peter, Karen Cherembang Anak (2024) CFD Analysis of PDC Drill Bit Designed for Interbedded Formation Drilling. [Final Year Project] (Submitted)

R

Rosmadi, Nurfarah Hanim (2024) Fractional-order Control Algorithm for Drone Safe Landing during the Loss of Propeller. [Final Year Project] (Submitted)

Raja Azlan, Raja Muhammad Raihan (2024) Condition Monitoring of Rotating Machine using Thermal Imaging. [Final Year Project] (Submitted)

Ramani, Divinyaa (2024) CarbonSense: Advanced Alarm System for CO2 Absorption and Desorption Reactor in Digital Twin Environment. [Final Year Project] (Submitted)

Rostam, Ariff Imran (2024) ENHANCING HSE TRAINING THROUGH IMMERSIVE METAVERSE EXPERIENCES. [Final Year Project] (Submitted)

Rozmi, Muhammad Danish Aiman (2024) Predictive Analytics for Safety Enhancement in Petrochemical Plants. [Final Year Project] (Submitted)

Rostam Affandi, Mariah Mardhiah (2024) Cleaning Service Application System. [Final Year Project] (Submitted)

Rizalman Haris, Muhammad Ilham (2024) TideGuard CampApp: An application for campers with River surge Detection System. [Final Year Project] (Submitted)

Rosdiazli, Nur Ahna Adli (2024) Developing Learning Assistance Tool For Visually Impaired Pre-Schoolers using Artificial Intelligence. [Final Year Project] (Submitted)

Roslan, Sri Ain Nasuha (2024) Dynamic Analysis of Stiffened Rectangular Plates with Openings. [Final Year Project] (Submitted)

Romi, Nurkhairun Nadia (2024) Hybrid Solar Still with Charcoal Heat Waste as An Enhancement for Extraction of Clear Water. [Final Year Project] (Submitted)

Rahman, Mohammad Miskatur (2024) Explore Ease. [Final Year Project] (Submitted)

Rosyarhan, Eliana Farisha (2024) Investigation on the effect of Induced Acidic Conditions on CO2 adsorption on Shale cap rock -Implication for geological carbon storage (GCS). [Final Year Project] (Submitted)

Razali, Nurezzatul Husnie (2024) Effect of Metakaolin on the properties of Class G cement. [Final Year Project] (Submitted)

Razali, Rawaida (2024) Detection of Rare Earth Elements in Solution using Raman Spectroscopy. [Final Year Project] (Submitted)

Ril Anuwa, Nur Aqilah (2024) Biolubricant production from organic waste via solar microwave heating. [Final Year Project] (Submitted)

Rosli, Amal Firdaus (2024) Numbering-up of microchannel reactors for biodiesel production. [Final Year Project] (Submitted)

Ravindran, Danesh (2024) Study And Development of Minimum Ignition Temperature Predictive Tool for Combustible Dust Using Machine Learning Application. [Final Year Project] (Submitted)

Rou, Kek Wan (2024) Predictive modeling of biodiesel-derived glycerol valorization to value-added products using machine learning algorithms. [Final Year Project] (Submitted)

Rusli, Anis Izzana (2024) Thermal properties effect on gylcerol-pha treated of banana peel fibers composite films. [Final Year Project] (Submitted)

Rubangi, Aireen Sofea (2024) Removal of hydrogen sulfide using laterite materials. [Final Year Project] (Submitted)

Rahim, Nur Farishah Ainna (2024) Metal organic framework as methane adsorbent. [Final Year Project] (Submitted)

Rozali, Adibah (2024) Molecular Design of Functionalized Silica Nanocomposites in Cellulose Acetate based Mixed Matrix Membranes for CO2/CH4 Separation. [Final Year Project] (Submitted)

Ridzwan, Muhammad Fakhrul Radzi (2024) Quantitative Risk Assessment of Waste-to-Energy Facility. [Final Year Project] (Submitted)

Rodzi, Umi Hazirah (2024) Optimization of azo dyes removal by hybrid silica adsorbent using Response Surface Methodology (RSM). [Final Year Project] (Submitted)

Rodzi, Hizami (2024) Simulation and Testing of Dynamic Current Limiting Algorithm to Extend Operating Range of Electric Scooters. [Final Year Project] (Submitted)

Roslan, Putri Aida Natasya (2024) Simulation and field vaildation of electric propulsion efficiency of electric scooter with variations of PWM frequency of H-bridge motor drive. [Final Year Project] (Submitted)

Rustam Fazly, Luqman Hakim (2024) Stabilization and Counter Mechanism of Sudden Mass Drop of Autonomous Small Drone During Package Delivery. [Final Year Project] (Submitted)

RUSDI, MUHAMMAD AFIQ (2024) Reservoir Characterization and Karst System Modeling through Immersive Virtual Reality. [Final Year Project] (Submitted)

Rahman, Mohammad Miskatur (2024) Explore Ease web app- helps travelers to hire local people to do the bookings and provide guidance. [Final Year Project] (Submitted)

Rohaizad, Amirah Rasyidah (2024) Experimental studies on sub-surface wetlands system in treating domestic wastewater- Water quality performance. [Final Year Project] (Submitted)

S

Sekaran, Sanjif Chandra (2024) Inventory Management System. [Final Year Project] (Submitted)

SEIDOVA, LACHYN (2024) CO2 CAPTURE VIA GAS HYDRATE FORMATION. [Final Year Project] (Submitted)

SARIF, SUHAILIZA (2024) ARTIFICIAL INTELLIGENCE (AI)-BASED CONTROL FOR A CRYOGENIC AIR SEPARATION UNIT. [Final Year Project] (Submitted)

SAIFULRIZAM, NUR FARISHA DIYANA (2024) MACHINE LEARNING BASED TOOLS FOR ACID GAS REMOVAL UNIT (AGRU) PROCESS MONITORING. [Final Year Project] (Submitted)

SHAHNIZAM, EZZA FAIHARAH (2024) PHYSICAL, MECHANICAL AND THERMAL CHARACTERISTICS OF PHA-CELLULOSE FROM BIOMASS FIBERS COMPOSITE FILMS. [Final Year Project] (Submitted)

SHRI, MANJU (2024) EMISSION FACTOR DEVELOPMENT FOR PETROL, DIESEL AND BIODIESEL USED IN MALAYSIA FOR NATIONAL GREENHOUSE GAS INVENTORY. [Final Year Project] (Submitted)

Suching, Herrent Elven (2024) Plant Disease Detection for Tomato/Chili Leaves using Image Processing and Machine Learning. [Final Year Project] (Submitted)

Syed Nasir, Syed Wafiy Hakim (2024) Age Invariant Face Recognition. [Final Year Project] (Submitted)

Sohaimi, Sakinah Fatini (2024) Smart Traffic Light System for Road Construction Work. [Final Year Project] (Submitted)

Shamsul Kamal, Nurain Afiqah (2024) Denoising of acoustic emission signal using wavelet transform. [Final Year Project] (Submitted)

Su, Michelle Hui Lin Eric (2024) Machine learning based video detection for precise fish feeding in aquaculture systems. [Final Year Project] (Submitted)

Shamas, Shamsuhaila (2024) Swarm Intelligence Robotics for Improved Emergency Response Plan. [Final Year Project] (Submitted)

Shaffie, Nursyifaa Aisyah (2024) E-FYP: Leveraging Data Analytics for Enhanced User Control in UTP Final Year Project Management System. [Final Year Project] (Submitted)

Sukhvindar Singh, Raveena Kaur (2024) Comparative Analysis Performance of the Prediction of Low-Rate DDoS Attack using Machine Learning. [Final Year Project] (Submitted)

Shan, Noor Syakira (2024) DEVELOPMENT OF MACHINE LEARNING MODEL SYSTEM IN MONITORING AND PREDICTING HYDROPLANT MACHINE PERFORMANCE. [Final Year Project] (Submitted)

Syed Omar, Alawi (2024) Appointment and Queuing System for Local Clinics. [Final Year Project] (Submitted)

Shaharil, Sofea (2024) An IoT-based Smart Urban Parking and Reservation System. [Final Year Project] (Submitted)

SALINDER SINGH, PEVAN JEET SINGH (2024) Enhancing Fire Drills Safety through Virtual Reality. [Final Year Project] (Submitted)

Sivappragasam, Hervishwaran (2024) StudyZen : A Holistic Platform for Student Well Being and Academic Success. [Final Year Project] (Submitted)

Saini Vermeulen, Muhammad Arif Nazhan (2024) AR-Driven Learning: A New Approach to Understand Gas Petroleum Engine. [Final Year Project] (Submitted)

Subramaniam, Dharshan (2024) UEats: UTP Food Ordering System. [Final Year Project] (Submitted)

Shamsul Bahri, Muhammad Akbar Shah (2024) Eye Tracker for Road Vehicle. [Final Year Project] (Submitted)

Saiful Bahri, Muhammad Najmi Afiq (2024) CW.io - Multiplayer Crossword Puzzle. [Final Year Project] (Submitted)

SHUKLI, NUR IRDINA (2024) Carbon Storage through mineral carbonation in mafic-ultramafic rocks. [Final Year Project] (Submitted)

SHAHRIZAL, FATIN NUR ANIESHA (2024) ML and seismic attribute fault detection, comparison and analysis, Malay Basin case. [Final Year Project] (Submitted)

SIU, MAYBELLINE CHENG KUEH (2024) Carbon Storage Strategies in Karstified and Fractured Formations: A Comprehensive Study of F-fields in Central Luconia Province. [Final Year Project] (Submitted)

Syed Rusli, Sharifah Ain Sabreena (2024) Heritage Threads: Tailored Cultural Expression. [Final Year Project] (Submitted)

Syamsul, Nur Dania Farizah (2024) Sentiment Analysis in Social Engineering Messages. [Final Year Project] (Submitted)

Shaiful Rahimi, Muhammad Norhazim (2024) MACHINE LEARNING-BASED PREDICTIVE MODEL FOR FUTURE SAVINGS: ANALYZING MONTHLY CONSUMPTION AND EARNINGS. [Final Year Project] (Submitted)

SAID MOHD NAJIB, ELIAS (2024) BLAZEBREAKER: GAMIFY THE FLAMES. [Final Year Project] (Submitted)

Suharto, Adzlan (2024) IoT-Based Smart Waste Management System For Malaysian Cities. [Final Year Project] (In Press)

Shafie, Puteri Nur Fakhira Umairah (2024) Investigation of Enzyme Induced Calcium Carbonate Precipitation (EICP) on Different Types of Rocks. [Final Year Project] (Submitted)

Surpina, Nazliah (2024) Paraffin precipitate inhibition using eco-friendly inhibitors. [Final Year Project] (Submitted)

Shahrol Hanizam, Naif Nafiz (2024) CO2 reforming of methane over Ni-based catalysts. [Final Year Project] (Submitted)

Shahrir Affandi, Arash Hadzim Haiqal (2024) Development of nanoporous polymer materials based on ionic liquid surfactants for CO2 capture and Separation. [Final Year Project] (Submitted)

Siva Kumar, Rishan Kumar (2024) Study And Development of Minimum Ignition Energy Predictive Tool for Combustible Dust Using Machine Learning Application. [Final Year Project] (Submitted)

Shaharom, Farzanah Hannani (2024) Predictive life cycle assessment modelling for prediction of environmental performance of sustainable transport fuels. [Final Year Project] (Submitted)

Saidia, Muhammad Fitri Hakimi (2024) Quantitative Risk Assessment for Chemical Methyl Tert-Butyl Ether Process Plant. [Final Year Project] (Submitted)

Suhairi, Muhammad Aqil (2024) Computer Based Vision for Condensate Color Determination Using Artificial Intelligence. [Final Year Project] (Submitted)

Sudiman, Siti Zawiyah Syamemie (2024) Comparison of Metastable Zone Width Analysis for Glycerol Originated from Purified Oil and Unpurified Oil in Solvent-Aided Crystallization. [Final Year Project] (Submitted)

Sukri, Farah Anissa (2024) Carbon Accounting Tool for Greenhouse Gas Emission Sources in Hydrogen Production Facilities. [Final Year Project] (Submitted)

Suhaifa, Nur Intan Syahirah (2024) Accuracy and Reliability of LOPC Calculations: A Validation Study. [Final Year Project] (Submitted)

Sim, Zhe Xi (2024) Ionic liquid as stable and wide electrochemical window electrolyte for supercapacitor application. [Final Year Project] (Submitted)

Saravanan, Sashivarma (2024) Anaerobic Digestion of Chicken Manure for Generation of Circular Economy Outputs: A Life Cycle Assessment (LCA) Study. [Final Year Project] (Submitted)

Sourendaran, Sinesh (2024) Anaerobic Digestion of Food Waste using Rice Paddy Field Soil as Inoculum: Correlation with Carbon-to-Nitrogen Ratio for Enhanced Biogas Generation. [Final Year Project] (Submitted)

Shaifol Azman, Nur Shahirah (2024) Production of Biodiesel from Waste Cooking Oil using Ca/Al2O3 Catalyst. [Final Year Project] (Submitted)

Saidi, Muhammad Haziq Mirza (2024) CO2 adsorption and desorption of amine-impregnated polymer aerogels. [Final Year Project] (Submitted)

Suhaifuddin, Sarah Hanni (2024) Automated detection of Diabetic Retinopathy. [Final Year Project] (Submitted)

Sia, Eric Siew Wei (2024) Development of Object Tracking system on a RISC V embedded system platform. [Final Year Project] (Submitted)

Salim, Muhammad Muzakki (2024) Development of Immersive learning of Boolean Algebra via gamification or virtual tour. [Final Year Project] (Submitted)

Syamsir Alam, Muhammad Danish Asyraf (2024) Short Term Solar Energy Prediction Based on Complete Ensemble Empirical Mode Decomposition With Adaptive Noise (CEEMDAN) and Sample Entropy. [Final Year Project] (Submitted)

Shahrul Azmi, Muhammad Hakimi (2024) Weed Classification and Localization. [Final Year Project] (Submitted)

Syakir Nurcholis, Ahmad Syakir (2024) Frequency Stability Analysis in the Rote Island Electrical Distribution System Under Various Conditions of Solar Power Plant and Bess Penetration Level. [Final Year Project] (Submitted)

Sawaludin, Muhammad Bazli (2024) Graphene Field-Effect Transistor for sensing applications. [Final Year Project] (Submitted)

Syarizal, Shah Hayziem (2024) CFD modelling and investigation on the utilization of Phase Change Material (PCM) in building’s cooling system. [Final Year Project] (Submitted)

Solahudin, Syaqir Aiman (2024) Structural Analysis of Deepwater Shaped Steel Lazy Wave Riser. [Final Year Project] (Submitted)

Suhazahari, Hazim Thaqif (2024) Design of test rig for static structural testing of offshore tubular joints. [Final Year Project] (Submitted)

Sibol Hamid, Muhammad Nabil Aiman (2024) Study the wireless sensor based data transfer from filed to the base unit and its effect on data loss. [Final Year Project] (Submitted)

Shane, Christian Caleb Anak (2024) Evaluate the Hydrogen Diffusivity in Transmuted Plasma-Facing Materials. [Final Year Project] (Submitted)

Sundarajan, Thaneswaran (2024) Material Selection for Fusion Reactor Blanket Layer Components. [Final Year Project] (Submitted)

Sharwar, Mohamed Raza Saquib (2024) Computational Modeling of Lithium-Ion Battery Packs with Varied Cell Spacing for Optimal Thermal Management Using Forced Air Cooling. [Final Year Project] (Submitted)

Syed Mohd Husainy, Sharifah Hannah (2024) Experimental and Molecular study of Uncaria Gambir Extract as a green inhibitor for steel. [Final Year Project] (Submitted)

Shaifuddin, Muhd Abdul Rahim (2024) Water repellency, permeability and wettability of thermal insulation materials for pipeline. [Final Year Project] (Submitted)

Sahat, Mohd Nurhadi (2024) The synthesis of epoxy coating reinforced with graphene oxide/mesoporous silica as coating for corrosion protection of steel structure. [Final Year Project] (Submitted)

Shaharzat, Muhammad Kamil (2024) Performance Evaluation of Tensile, Flexural and Porosity Properties of Kenaf Core and Recycled Concrete in Cement Brick. [Final Year Project] (Submitted)

Shariffuddin, Muhammad Nabil Fahmy (2024) Performance Evaluation of Compressive Strength, Density and Water Absorption Properties of Kenaf Core and Quarry Dust in Cement Brick. [Final Year Project] (Submitted)

Sumantere, Shahira Naziha (2024) Corrosion study of the effect different layer of coated metal in H2S environment. [Final Year Project] (Submitted)

Sapian, Muhammad Salman Hakim (2024) Effect of moisture absorption of polymer composite. [Final Year Project] (Submitted)

Singh, Harpreet (2024) Reliability prediction of Pipeline Isolation Plug. [Final Year Project] (Submitted)

Samuel, D'Wayne Jefferson (2024) Hybrid Photovoltaic Thermal Solar Collector with Integrated Thermoelectric Generators and Metal Heat Sink Fins. [Final Year Project] (Submitted)

S.M.Manogaran, Sashithaaran (2024) Visualization of Mixing of Different Liquids for Assessment of Mixing Efficiency. [Final Year Project] (Submitted)

Syamsul, Nur Dania Farizah (2024) Emotion Response Model in Social Engineering Messages. [Final Year Project] (Submitted)

Stewart @ Idris, Muhammad Azam Bin Christopher (2024) Smart Water Tank Level Alert and Monitoring System in Labuan. [Final Year Project] (Submitted)

Shahrol Azrai, Idlan Fahmi (2024) Stress and Strain Analysis During Pipeline S-lay Method. [Final Year Project] (Submitted)

Shah Jehan, Amir Syadiqin (2024) Numerical study of focused wave groups on spatially varying currents. [Final Year Project] (Submitted)

Suriya Kumar, Tharshini (2024) EFFECTS OF OILY SLUDGE ASH ON THE MECHANICAL PROPERTIES OF GEOPOLYMER COMPOSITE. [Final Year Project] (Submitted)

Shukri, Awliya (2024) Experimental study of an Offshore Oscillating Water Column integrated to an Oil Platform in a Low - Wave Environment. [Final Year Project] (Submitted)

T

THOOY, KOK PIN (2024) MULTIPHYSICS MODELLING OF SOLID OXIDE ELECTROLYSIS FOR A POWER-TO-HYDROGEN PRODUCTION. [Final Year Project] (Submitted)

Toh, Jian Yue (2024) Implementation of Intelligent Automatic Feeding with machine learning model and IOT on Recirculating Aquaculture System. [Final Year Project] (Submitted)

Tint, Zar Htut (2024) Development of Robotic Application on PV Panel Cleaning System at Solar Farm. [Final Year Project] (Submitted)

Tajul Azlan, Muhammad Faisal (2024) Development of wireless remote control and data monitoring for solar system using TELTONIKA RUT955 4G LTE and Arduino esp32module. [Final Year Project] (Submitted)

Tamil Selvan, Roshini Nair (2024) AlertNet : Accident Alert System. [Final Year Project] (Submitted)

Tamrin, Muhd Errizan Ashrin (2024) WheelShare - WheelChair Rental Apps. [Final Year Project] (Submitted)

Tingkas, Novi Fairindah (2024) Numerical Investigation: Performance Enhancement of Savonius Hydrokinetic. [Final Year Project] (Submitted)

Tan, Chi Kit (2024) Intelligent Supply Chain Management System (iSCMS). [Final Year Project] (Submitted)

Taban Lobojo, James Lugor (2024) CampusConnect Tutoring Application. [Final Year Project] (Submitted)

Teh, Wen Kang (2024) Influence of pH and Divalent Cation Effects on CO2 Hydrate Stability in Brine Systems. [Final Year Project] (Submitted)

Terry, Darren Anderson Anak (2024) Study on the electrocoagulation method for microalgae harvesting. [Final Year Project] (Submitted)

Tengku Syed Mukhriz, Tengku Sharifah Nur Sabrina (2024) Determination of Metastable Zone Width of Biodiesel in Solvent-Aided Crystallization. [Final Year Project] (Submitted)

Tambaka, Jordan Maikon (2024) Development of hazard rating system for nanomaterial. [Final Year Project] (Submitted)

Teh, Kok Xiang (2024) Photoelectrochemical Water-splitting based on Ce-doped ZnO nanorods for Solar-driven Hydrogen Generation. [Final Year Project] (Submitted)

Tuan Ismail, Tuan Muhammad Isma Hafizzuddin (2024) Study of chemical components of kenaf waste biooil via pyrolysis process. [Final Year Project] (Submitted)

Tan, Yu Ting (2024) Development of an IoT Enabled Respiratory System. [Final Year Project] (Submitted)

Thalaha, Ilham Izni (2024) Autonomous and Semi-autonomous Guidance, Navigation and Control of Unmanned Surface Vehicle for Water Wastes Collection (Phase 3). [Final Year Project] (Submitted)

Tan, Hon Chi (2024) Rust Detection on High Rise Structures. [Final Year Project] (Submitted)

Tey, Jue Xiang (2024) Mathematical design of RF microwave sinusoidal oscillator. [Final Year Project] (Submitted)

Tan, Derek Weng Hin (2024) Performance and emission investigation of a compression ignition engine powered with palm waste biodiesel. [Final Year Project] (Submitted)

Tan, Gabriel Xiao Ke (2024) Synthesis and Characterization of Zinc Oxide Nanoparticles for Enhanced LED Packaging. [Final Year Project] (Submitted)

Tan, Li Lun (2024) Effect of Hybrid Fillers on the Flexural Performance of 3D Fibre-Reinforced Composites. [Final Year Project] (Submitted)

Tham, Jian Yang (2024) Effect of Title Angle on Soiled Solar PV Panels in Malaysia. [Final Year Project] (Submitted)

Tamilarasu, Sangiitha (2024) Study on the Effects of Flow Baffles on the Heat Transfer in a Cold Water Reservoir. [Final Year Project] (Submitted)

V

VINCENT, VON VANCE (2024) GAS HYDRATE MITIGATION USING GREEN SOLVENT. [Final Year Project] (Submitted)

VUN, IVY JIN YING (2024) Seismic and DAS processing of X field, Peninsular Malaysia. [Final Year Project] (Submitted)

W

Wong, Grace Huei (2024) Development of an IoT-Enabled Automated Aquaculture Feeding System. [Final Year Project] (Submitted)

WIBOWO, TRISTANTO RACHMADI (2024) FORECASTING RICE PRICE IN MALAYSIA. [Final Year Project] (Submitted)

Wan Azman, Wan Amirul Ashar (2024) Gym Buddy Tracker Application. [Final Year Project] (Submitted)

Wan Azni, Wan Muhammad Amir Haziq (2024) Inhibitor for Salt Precipitation for CO2 injection efficiency. [Final Year Project] (Submitted)

Wan Abdul Manan, Wan Nur Alya (2024) Model based control for an industrial Air Separation Unit. [Final Year Project] (Submitted)

Wong, Eunice Sze Ting (2024) Development and characterization of mesoporous silica adsorbent for CO2/CH4 permeation and separation. [Final Year Project] (Submitted)

Wong, James Yun Yu (2024) Development of Mobile IoT Terminal with Data Cache. [Final Year Project] (Submitted)

Wong, Li-Kin Tristen (2024) Fast Ball Tracking. [Final Year Project] (Submitted)

Wong, Roger Yi Qin (2024) Fault diagnosis of PV plant using digital twin technology. [Final Year Project] (Submitted)

Wong, Chen Chee (2024) Analyzing the performance of melamine (P-C-N) system with layered hydroxides additives. [Final Year Project] (Submitted)

WAN HASSAN, WAN AHMAD FAUZI (2024) Geological and Geophysical Data Integration for Carbon Storage Evaluation in Carbonate Reservoir. [Final Year Project] (Submitted)

Y

Yap, Wei Cheng (2024) Synthesis and FPGA hardware simulation of an open-source RISC-V core for edge computing. [Final Year Project] (Submitted)

Yoga Lingam, Darmini (2024) Design and Development of Grid Monitoring System utilizing Photovoltaic Systems through Typhoon HIL. [Final Year Project] (Submitted)

Yunos, Anwar (2024) Mitigation of High Third Harmonic Current at Unit Connected Generator Neutral Using Metal Oxice Varistor. [Final Year Project] (Submitted)

Yap, Shes Lynn (2024) EHS fake photo detection system. [Final Year Project] (Submitted)

Yusof, Norhanis Athirah (2024) SignBridge: Deaf Accessibility in Malaysia Customer Service using Computer Vision and Deep Learning. [Final Year Project] (Submitted)

Yushaszami, Nurazmira Ayuni (2024) Queue Management System for Parcel Hubs. [Final Year Project] (Submitted)

YAZALY, MUHAMMAD NAUFAL (2024) Aeromagnetic interpretation of the Offshore Penyu Basin, Malaysia. [Final Year Project] (Submitted)

Yahya, Ahmad Khairuddin Iskandar (2024) Effective Maintenance Framework in Oil and Gas Projects. [Final Year Project] (Submitted)

Yai, Kuol Lueth Kuol (2024) Effect of Opening Size on Structural Behaviour in Composite Steel Deck with High Performance Concrete (HPC). [Final Year Project] (Submitted)

Yusni, Nur Ain Aina (2024) Synthesis and Theoretical Insight On The Interaction Between UiO-67 and Ionic Liquid. [Final Year Project] (Submitted)

Yusri, Muhammad Ali Syaharzuhdi (2024) Degradation of composite in hydrogen environment. [Final Year Project] (Submitted)

Yusoff, Mohamad Azfar (2024) Modelling and Simulation of a Diesel-Electric Hybrid Ship Propulsion System. [Final Year Project] (Submitted)

Yap, Yi Xian (2024) Corrosion Behavior Study of CFRP Strengthened Steel with Different Oxide Layer Thickness under High Temperature. [Final Year Project] (Submitted)

YOUSIF, AKRAM (2024) Enhancing seismic facies analysis in fluvial reservoirs: a comparison between clustering and classification techniques. [Final Year Project] (Submitted)

Z

Zulkifli, Adam Daniel (2024) Smart Grass Trimming Robot for Palm Plantation Management. [Final Year Project] (Submitted)

Zawawi, Muhammad Aniq (2024) Non-prior Information Root Finding Problem for Complex Real Time Engineering Tasks. [Final Year Project] (Submitted)

Zainal Azam, Zainal Ashraf (2024) Marketing Decision Assistance. [Final Year Project] (Submitted)

ZAILAIL, NAJIHAH ZAFIRA (2024) Integrated Employee Performance Management Dashboard for Human Resource Department. [Final Year Project] (Submitted)

Zulkefli, Muhammad Mukmin (2024) Predictive Analytics For Student Performance. [Final Year Project] (Submitted)

Zulfahmi, Farhan Hakimi (2024) Light Motion Sensor. [Final Year Project] (Submitted)

Zamri, Ameer Faqihi (2024) Memoria: Gallery Application for Android. [Final Year Project] (Submitted)

Zulqahar, Megat Aryf (2024) AR: The Future of Oil and Gas Industry. [Final Year Project] (Submitted)

Zidan Aqila Kamil, Mochamad (2024) Forecasting the Air Quality Index (AQI) in Jakarta, Indonesia by Using a Linear Regression Model. [Final Year Project] (Submitted)

Zawawi, Muhammad Zahin (2024) System identification-based models for for quick performance evaluation of a gas flooding reservoir. [Final Year Project] (Submitted)

Zahuren, Muhammad Zahran (2024) Sonodegradation of micro-pollutants in presence of particulate materials. [Final Year Project] (Submitted)

Zulkornain, Bilal (2024) Physical characteristics of pha cellulose from banana peel fibers composite films. [Final Year Project] (Submitted)

Zulkifli, Nur Adila Nabiha (2024) Gas dispersion modelling for ethylene leak. [Final Year Project] (Submitted)

Zaini, Muhammad Fadlan (2024) Benzene, toulene and xylene (BTX) extraction from waste tyre pyrolysis oil. [Final Year Project] (Submitted)

Zainuzi, Adlina Zafirah (2024) Combined Pinch-Exergy analysis for optimal LNG cold energy recovery. [Final Year Project] (Submitted)

Zaharin, Muhammad Firdaus (2024) Palletizing geopolymer - liquid natural rubber adsorbent for wastewater treatment. [Final Year Project] (Submitted)

Zainuddin, Nor Amirah (2024) Classification of Physiological Signals of Fatigues using machne learning Models. [Final Year Project] (Submitted)

Zairadi, Noor Arisya Fitri (2024) Modelling and Experimental study of hybrid grounding transformer using Metal Oxide Varistor (MOV) using MATLAB Simscape. [Final Year Project] (Submitted)

Zainal Abidin, Zalikha Armanee (2024) Mindfulnes in mediation. [Final Year Project] (Submitted)

Zamri, Muhammad Irfan (2024) Optimization of Penetration Rate for “Polycrystalline Diamond Compact Drill Bit” using Discrete Element Modelling. [Final Year Project] (Submitted)

Zamri, Harith (2024) CFD Analysis of PDC Drill Bit Nozzle Efficiency Designed for Interbedded Formation Drilling. [Final Year Project] (Submitted)

Zaimi, Qamariah (2024) Modelling and Analysis of Active Electric Power Steering of EV Passenger Cars for Enhanced Performance. [Final Year Project] (Submitted)

Zuhri, Adib Haqqi (2024) Pipe dented identification using fiber bragg grating sensor. [Final Year Project] (Submitted)

Zainul Hisyam, Abdul Hanan (2024) Simulated Tank Leaking Detecting Using Acoustic Emission (Ae) Technology For Inspection And Monitoring Of Tank In Process Industry. [Final Year Project] (Submitted)

Zainuddin, Hafiz Hazmirul (2024) Development Of Materials Informatics: The Materials “Gene” For Alloy In Charge in Nuclear Fusion Reactor. [Final Year Project] (Submitted)

Zainal Abidin, Adam Harith (2024) Development of diaphragm-based fibre Bragg grating (FBG) geophone for seismic acquisition. [Final Year Project] (Submitted)

Zuraini, Nur Fathiah Husna (2024) Exploring Pore Shape Effects in Metal Foam Filters: Implications for Flow Rate and Sand Production Control. [Final Year Project] (Submitted)

Zainol, Najmuddin Mifdhal (2024) Photovoltaic Thermal Solar Collector with PCM Embedded Porous Media Absorber. [Final Year Project] (Submitted)

Zakaria, Hanis Sofia (2024) Obstacles to the Adoption of Industry 4.0 in Malaysia: Identifying and Addressing Challenges. [Final Year Project] (Submitted)

Zulaily, Zafaran Iqhwanshah (2024) DEVELOPMENT OF COST EFFECTIVE IBS SYSTEM. [Final Year Project] (Submitted)