Items where Year is 2025

Abdullah (2025) Adaptive Threshold Based Clustering and Graph-Based Centrality Methods for Electroencephalogram Channel Selection in Brain-Computer Interface. Doctoral thesis, UNIVERSITI TEKNOLOGI PETRONAS.

Muhammad Risha (2025) The Effect of Clay Minerals and Microporosity on Siliciclastic Reservoirs: A Case Study from Labuan, Malaysia. Masters thesis, UNIVERSITI TEKNOLOGI PETRONAS.

Md Yusof, M Aslam (2025) LAND RIG. [Instructional Teaching Materials]

Md Yusof, M Aslam (2025) OIL TANKER. [Instructional Teaching Materials]

Md Yusof, M Aslam (2025) DRILLSHIP. [Instructional Teaching Materials]

A Rahman, Noor A'in (2025) Classification and Diagnosis of Acoustic Emission Signals in Application for Protective Coating Breakdown Event. Masters thesis, UNIVERSITI TEKNOLOGI PETRONAS.

Abdul Khalid, Haniza (2025) Enhancing Academic Well-Being: A Multifaceted Approach to Managing Psychosocial Hazards Among Academics at Private Research-Focused Universities in Malaysia. Doctoral thesis, UNIVERSITI TEKNOLOGI PETRONAS.

Abdul Manaf, Aida Syafiqah (2025) Microwave-Assisted Conversion of Glucose To 5-Hydroxymethylfurfural In The Presence Of Low Transition Temperature Mixture. Masters thesis, UNIVERSITI TEKNOLOGI PETRONAS.

Abdul Samat, Nur Amalina Shairah (2025) . Masters thesis, Universiti Teknologi PETRONAS.

Abdullah, Abdul Hazim (2025) Evaluation of Polyethyleneimine-Grafted Graphene Oxide Nanocomposite in Water-Based Drilling Fluid for Enhanced Rheological, Filtration and Shale Inhibition Performance. Doctoral thesis, UNIVERSITI TEKNOLOGI PETRONAS.

Abimbola, Tijani Oladoyin (2025) Enhancing Solar Distillation Efficiency with Integrated Photovoltaic and Heat Localization Techniques for Clean Water Production. Doctoral thesis, UNIVERSITI TEKNOLOGI PETRONAS.

Ahmad Annuar, Nadiyatul Farhana (2025) Brain Computer Interface for Control Applications using Intelligent Technique. [Final Year Project] (Submitted)

Ahmed, Syed Waqar (2025) Thermal Performance Evaluation and Optimization of Perforated and Chimney Structure Radial Heatsinks under Natural Convection for LED Applications. Doctoral thesis, UNIVERSITI TEKNOLOGI PETRONAS.

Al-Mahbashi, Najib Mohammed Yahya (2025) Kinetic Studies on the Treatment of Wastewater Containing Phenol using Integrated Paddy Stalks Activated Carbon-Activated Sludge System. Doctoral thesis, UNIVERSITI TEKNOLOGI PETRONAS.

Alameen, Mohammed Basheer (2025) Investigation On Impact Of Water Saturation And Silica Dissolution On Sandstone Stability During Water Flooding Process. Doctoral thesis, UNIVERSITI TEKNOLOGI PETRONAS.

Ali, Sajjad (2025) Thermal and Structural Analysis of Mg(BH4)2–Zr(BH4)4 Reactive Hydride Composite for Solid-State Hydrogen Storage. Doctoral thesis, Universiti Teknologi PETRONAS.

Ali Khan, Zulfiqar (2025) Enhanced Whale Optimization Algorithms for Scheduling Independent Tasks in Cloud and Fog Computing. Doctoral thesis, UNIVERSITI TEKNOLOGI PETRONAS.

Anka, Rashida Bello (2025) Building Customer Intimacy in Fuel Stations Through Self-Service Technology: The Role of Customer Willingness to Use and Perception. Masters thesis, UNIVERSITI TEKNOLOGI PETRONAS.

Hagar, Haithm Salah Mohammed Salah (2025) A Sustainable Chitin Nanocrystal-Stabilised Emulsions and Foams to Enhance The Conformance Control in Porous Media. Doctoral thesis, UNIVERSITI TEKNOLOGI PETRONAS.

Ismail, Marhaina (2025) Adsorption Of Carbon Dioxide and Methane onto Gallate-Based Metal-Organic Frameworks. Doctoral thesis, UNIVERSITI TEKNOLOGI PETRONAS.

Jamaludin, Siti Nur Fathiyah and Ibrahim, Noor Azahar (2025) BIOTITE GRANITE. [Instructional Teaching Materials]

Jamaludin, Siti Nur Fathiyah and Ibrahim, Noor Azahar (2025) GOMANTONG LIMESTONE. [Instructional Teaching Materials]

Jamaludin, Siti Nur Fathiyah and Ibrahim, Noor Azahar (2025) GRANODIORITE. [Instructional Teaching Materials]

Jamaludin, Siti Nur Fathiyah and Ibrahim, Noor Azahar (2025) KANTHAN LIMESTONES. [Instructional Teaching Materials]

Jamaludin, Siti Nur Fathiyah and Ibrahim, Noor Azahar (2025) PEGMATITE. [Instructional Teaching Materials]

Jamaludin, Siti Nur Fathiyah and Ibrahim, Noor Azahar (2025) PERIDOTITE. [Instructional Teaching Materials]

Jamaludin, Siti Nur Fathiyah and Ibrahim, Noor Azahar (2025) PERLOP IRON ORE. [Instructional Teaching Materials]

Jamaludin, Siti Nur Fathiyah and Ibrahim, Noor Azahar (2025) SANDSTONE AND SHALE. [Instructional Teaching Materials]

Jamaludin, Siti Nur Fathiyah and Ibrahim, Noor Azahar (2025) SANDSTONE AND SHALE ANGCO QUARRY, TUARAN SABAH. [Instructional Teaching Materials]

Jamaludin, Siti Nur Fathiyah and Ibrahim, Noor Azahar (2025) SANDSTONE AND SHALE KAMPUNG BAWANG. [Instructional Teaching Materials] (Submitted)

Jamaludin, Siti Nur Fathiyah and Ibrahim, Noor Azahar (2025) SANDSTONE AND SHALE, KOTA MARUDU SABAH. [Instructional Teaching Materials]

Jamaludin, Siti Nur Fathiyah and Ibrahim, Noor Azahar (2025) SERPENTINITE. [Instructional Teaching Materials]

Jamaludin, Siti Nur Fathiyah and Ibrahim, Noor Azahar (2025) SIMPANG PULAI MARBLE. [Instructional Teaching Materials]

Jamaludin, Siti Nur Fathiyah and Ibrahim, Noor Azahar (2025) SUEVITE. [Instructional Teaching Materials]

Jamaludin, Siti Nur Fathiyah and Ibrahim, Noor Azahar (2025) PORPHYRITIC GRANITE. [Instructional Teaching Materials]

Kanna Dasan, Yaleeni (2025) Optimization of Carbon Dioxide Biofixation using Chlorella vulgaris in Sequential Flow Photobioreactors for Production of Biodiesel and Biocomposites. Doctoral thesis, UNIVERSITI TEKNOLOGI PETRONAS.

Khan, Abdul Mateen (2025) Digitalization of Value Engineering in Buildings through BIM Plug-in Development. Masters thesis, UNIVERSITI TEKNOLOGI PETRONAS.

Matovu, Fahad (2025) Synthesis and Optimization of Low Temperature Refrigeration Systems using Generalized Disjunctive Programming. Doctoral thesis, UNIVERSITI TEKNOLOGI PETRONAS.

Mausor, Farahida Hanim (2025) Fast Moving Ant with Fuzzy Centroid: Imputation of Missing Value In Dataset. Doctoral thesis, UNIVERSITI TEKNOLOGI PETRONAS.

Md Iqbar, Izleena (2025) Techno-economic Assessment Of A Hybrid Floating Wind-gas Turbine Energy System For Offshore Oil And Gas Fields In Malaysia. Masters thesis, UNIVERSITI TEKNOLOGI PETRONAS.

Md Yusof, M Aslam (2025) JACKET PLATFORM. [Instructional Teaching Materials]

Md Yusof, M Aslam (2025) JACK UP PLATFORM. [Instructional Teaching Materials]

Md Yusof, M Aslam (2025) LNG CARRIER. [Instructional Teaching Materials]

Md Yusof, M Aslam (2025) SEMI SUBMERSIBLE. [Instructional Teaching Materials]

Md Yusof, M Aslam (2025) SINGLE POINT ANCHOR RESERVOIR (SPAR). [Instructional Teaching Materials]

Mohamad Asri, Nur Asyatulmaila (2025) Development of Artificial Neural Network (Ann) Model By Using Vegetation Indices to Detect Hydrocarbon in Oil Palm Trees. Doctoral thesis, UNIVERSITI TEKNOLOGI PETRONAS.

Mohamed, Abdirahman Hassan (2025) Kinetics of CO2 Hydrate Formation in Clayey Sand Sediments: Implications for CO2 Sequestration. Masters thesis, UNIVERSITI TEKNOLOGI PETRONAS.

Mustapha, Aliyu (2025) Assessment and Analysis of Signage Design using Simulation Technique Amongst Oil and Gas Tanker Drivers in Nigeria. Doctoral thesis, UNIVERSITI TEKNOLOGI PETRONAS.

Nasser Saleh Al-Dhawi, Baker (2025) Boron and Lithium Adsorption from Aqueous Solutions through Batch and Column Study: Desorption Mechanisms, Regeneration Techniques, and Kinetic. Doctoral thesis, UNIVERSITI TEKNOLOGI PETRONAS.

Nouh Hassan, Salma Awad (2025) Particles Coating Uniformity of Controlled-Release Urea Fertilizer: Experiments and Discrete Element Method Simulation. Doctoral thesis, UNIVERSITI TEKNOLOGI PETRONAS.

Nuthalapati, Suresh (2025) Detection and Characterization of Chloride Induced Stress Corrosion Cracking on SS304 Austenitic Stainless Steel under Thermal Insulation using Acoustic Emission Testing. Doctoral thesis, UNIVERSITI TEKNOLOGI PETRONAS.

Oladoyin, Abimbola Tijani (2025) Enhancing Clean Water Production Using Integrated Photovoltaic Thermal Enhancement and Heat Localization Technique (InPHOTEHL). Masters thesis, UNIVERSITI TEKNOLOGI PETRONAS.

Owusu, Victor Darkwah (2025) Experimental Investigation and Geochemical Modeling of Acidic Treatment for Salt Precipitation Mitigation to Enhance CO2 Injectivity. Masters thesis, UNIVERSITI TEKNOLOGI PETRONAS.

PAST YEAR QUESTION (2025) CEB3023/CFB2073 PROCESS SAFETY & LOSS PREVENTION, PROCESS SAFETY AND LOSS PREVENTION. [Past Year Examination Question]

Past Year Exam Question (2025) AAB2012 MATERIALS CHARACTERIZATION AND ANALYTICAL TECHNIQUE. [Past Year Examination Question]

Past Year Exam Question (2025) AAB2022 THERMODYNAMICS AND HEAT TRANSFER FOR MATERIALS. [Past Year Examination Question]

Past Year Exam Question (2025) AAB2033/MEB4033/MFB3043 MANUFACTURING TECHNOLOGY II, MANUFACTURING TECHNOLOGY II, MATERIALS PROCESSING II. [Past Year Examination Question]

Past Year Exam Question (2025) AAB2073 FAILURE ANALYSIS AND NDE. [Past Year Examination Question]

Past Year Exam Question (2025) AAB2083 ENGINEERING COMPOSITES. [Past Year Examination Question]

Past Year Exam Question (2025) AAB2092 PHASE TRANSFORMATIONS IN METALLIC MATERIALS. [Past Year Examination Question]

Past Year Exam Question (2025) AAB4062 GREEN COMPOSITES. [Past Year Examination Question]

Past Year Exam Question (2025) AAB4223 DEGRADATION MECHANISM AND PREVENTION. [Past Year Examination Question]

Past Year Exam Question (2025) AAB4233 ADVANCES SURFACE COATING. [Past Year Examination Question]

Past Year Exam Question (2025) BBM5114 PRINCIPLES OF CORROSION. [Past Year Examination Question]

Past Year Exam Question (2025) BBM5214 CORROSION INHIBITION, CATHODIC PROTECTION AND PROTECTIVE COATING. [Past Year Examination Question]

Past Year Exam Question (2025) BBM5223 ENGINEERING FAILURE ANALYSIS AND INSPECTION. [Past Year Examination Question]

Past Year Exam Question (2025) CBM5113 PRINCIPLES OF PROCESS SAFETY MANAGEMENT. [Past Year Examination Question]

Past Year Exam Question (2025) CBM5143 SAFE DESIGN AND OPERATION. [Past Year Examination Question]

Past Year Exam Question (2025) CCM5113 PRINCIPLES OF PROCESS SAFETY MANAGEMENT. [Past Year Examination Question]

Past Year Exam Question (2025) CCM5143 SAFE DESIGN AND OPERATION. [Past Year Examination Question]

Past Year Exam Question (2025) CCM5233 QUANTITATIVE RISK ASSESSMENT. [Past Year Examination Question]

Past Year Exam Question (2025) CCM5263 ENVIRONMENTAL RISK & IMPACT ASSESSMENT. [Past Year Examination Question]

Past Year Exam Question (2025) CEB1032/CFB1032-1 HEALTH, SAFETY AND ENVIRONMENT, HEALTH, SAFETY AND ENVIRONMENT. [Past Year Examination Question]

Past Year Exam Question (2025) CEB2013/CFB2013 SEPARATION PROCESS I, SEPARATION PROCESS I. [Past Year Examination Question]

Past Year Exam Question (2025) CEB2023/CFB2023 CHEMICAL ENGINEERING THERMODYNAMICS II, CHEMICAL ENGINEERING THERMODYNAMICS II. [Past Year Examination Question]

Past Year Exam Question (2025) CEB2093 REACTION ENGINEERING II. [Past Year Examination Question]

Past Year Exam Question (2025) CEB4013/CFB3023 PROCESS PLANT DESIGN, PROCESS PLANT DESIGN. [Past Year Examination Question]

Past Year Exam Question (2025) CEB4032/CFB3032 ANALYTICAL CHEMISTRY, ANALYTICAL INSTRUMENTATION. [Past Year Examination Question]

Past Year Exam Question (2025) CEB4233 SUSTAINABLE ENGINEERING PRACTICES. [Past Year Examination Question]

Past Year Exam Question (2025) CEB4533 TECHNICAL MANAGEMENT FOR PROCESS SAFETY. [Past Year Examination Question]

Past Year Exam Question (2025) CFB1023 PHYSICAL CHEMISTRY. [Past Year Examination Question]

Past Year Exam Question (2025) CFB1053 CHEMICAL ENGINEERING FLUID MECHANICS. [Past Year Examination Question]

Past Year Exam Question (2025) CFB1053 CHEMICAL ENGINEERING FLUID MECHANICS. [Past Year Examination Question]

Past Year Exam Question (2025) CFB1063 PROCESS HEAT TRANSFER. [Past Year Examination Question]

Past Year Exam Question (2025) CFB1072 CHEMICAL ENGINEERING THERMODYNAMICS I. [Past Year Examination Question]

Past Year Exam Question (2025) CFB2063 SEPARATION PROCESS II. [Past Year Examination Question]

Past Year Exam Question (2025) CFB2083 PROCESS MODELLING & SIMULATION. [Past Year Examination Question]

Past Year Exam Question (2025) DCM5013 GEOMECHANICS. [Past Year Examination Question]

Past Year Exam Question (2025) DCM5024 WELL ENGINEERING. [Past Year Examination Question]

Past Year Exam Question (2025) DCM5033 DRILLING FLUIDS & CEMENTING. [Past Year Examination Question]

Past Year Exam Question (2025) DCM5043 WELL COMPLETION. [Past Year Examination Question]

Past Year Exam Question (2025) ECM5053 OPTIMISATION. [Past Year Examination Question]

Past Year Exam Question (2025) ECM5123 REFINERY OPTIMIZATION. [Past Year Examination Question]

Past Year Exam Question (2025) ECM5133 ADVANCED DISTILLATION DESIGN. [Past Year Examination Question]

Past Year Exam Question (2025) EDB1053/EFB1074 MICROELECTRONIC PHYSICS & DEVICES, MICROELECTRONIC PHYSICS & DEVICES. [Past Year Examination Question]

Past Year Exam Question (2025) EDB2033/EEB2013/EFB2013 ANALOGUE ELECTRONICS, ANALOGUE ELECTRONICS, ANALOGUE ELECTRONICS I. [Past Year Examination Question]

Past Year Exam Question (2025) EDB3023/EEB4063/EFB3043 DATA & COMPUTER NETWORK, DATA & COMPUTER NETWORK, DATA AND COMPUTER NETWORK. [Past Year Examination Question]

Past Year Exam Question (2025) EDB3603/RBB2042 LINEAR ALGEBRA AND MATRIX METHODS, LINEAR ALGEBRA AND MATRIX METHODS. [Past Year Examination Question]

Past Year Exam Question (2025) EDB4033 COMPUTER SYSTEMS ARCHITECTURE. [Past Year Examination Question]

Past Year Exam Question (2025) EDB4603 DISTRIBUTED AND PARALLEL COMPUTING. [Past Year Examination Question]

Past Year Exam Question (2025) EDB4613 SCALABLE ARCHITECTURES. [Past Year Examination Question]

Past Year Exam Question (2025) EDB4713 UBIQUITOUS COMPUTING. [Past Year Examination Question]

Past Year Exam Question (2025) EEB2023/EFB1063 NETWORK ANALYSIS, NETWORK ANALYSIS. [Past Year Examination Question]

Past Year Exam Question (2025) EEB2043/EFB2043 COMMUNICATION SYSTEMS, COMMUNICATION SYSTEMS. [Past Year Examination Question]

Past Year Exam Question (2025) EEB2053/EFB2063 INSTRUMENTATION AND MEASUREMENT, INSTRUMENTATION AND MEASUREMENT. [Past Year Examination Question]

Past Year Exam Question (2025) EEB3013/EFB3013 POWER SYSTEMS, POWER SYSTEMS. [Past Year Examination Question]

Past Year Exam Question (2025) EEB3033/EFB3033 POWER ELECTRONICS, POWER ELECTRONICS. [Past Year Examination Question]

Past Year Exam Question (2025) EEB4033/EFB4023 DIGITAL SIGNAL PROCESSING, DIGITAL SIGNAL PROCESSING. [Past Year Examination Question]

Past Year Exam Question (2025) EEB4073/EFB4073/VDB4053 ENGINEERS IN SOCIETY, ENGINEERS IN SOCIETY, ENGINEERS IN SOCIETY. [Past Year Examination Question]

Past Year Exam Question (2025) EEB4213 MODERN CONTROL ENGINEERING. [Past Year Examination Question]

Past Year Exam Question (2025) EEB4313 ADVANCED ELECTRICAL MACHINES. [Past Year Examination Question]

Past Year Exam Question (2025) EEB4333 ADVANCED POWER SYSTEM. [Past Year Examination Question]

Past Year Exam Question (2025) EEB4423 SENSORS AND TRANSDUCERS DESIGN. [Past Year Examination Question]

Past Year Exam Question (2025) EEM5023 ADVANCED DIGITAL SYSTEMS DESIGN. [Past Year Examination Question]

Past Year Exam Question (2025) EFB1013 CIRCUIT THEORY. [Past Year Examination Question]

Past Year Exam Question (2025) EFB1043/EEB1063 SIGNALS & SYSTEMS, SIGNALS & SYSTEMS. [Past Year Examination Question]

Past Year Exam Question (2025) EFB1054 DIGITAL ELECTRONICS. [Past Year Examination Question]

Past Year Exam Question (2025) EFB2023/EEB1073 ELECTROMAGNETIC THEORY, ELECTROMAGNETIC THEORY. [Past Year Examination Question]

Past Year Exam Question (2025) EFB2053 MICROELECTRONIC CIRCUITS. [Past Year Examination Question]

Past Year Exam Question (2025) EFB2083 ELECTRICAL MACHINES. [Past Year Examination Question]

Past Year Exam Question (2025) EFB2083 - ELECTRICAL MACHINES. [Past Year Examination Question] (Submitted)

Past Year Exam Question (2025) EFB3023 CONTROL SYSTEMS. [Past Year Examination Question]

Past Year Exam Question (2025) EFB4133 DIGITAL SYSTEM DESIGN. [Past Year Examination Question]

Past Year Exam Question (2025) FEM2063/FFM2063-1 DATA ANALYTICS, DATA ANALYTICS. [Past Year Examination Question]

Past Year Exam Question (2025) GEB1032/GEB1033/GFB1033 Management and Organisational Behaviour, Management and Organisational Behaviour, Management and Organisational Behaviour. [Past Year Examination Question]

Past Year Exam Question (2025) GEB3043/GFB3043 - INTERNATIONAL FINANCIAL MANAGEMENT. [Past Year Examination Question]

Past Year Exam Question (2025) GEB3083 - INTERNATIONAL BUSINESS. [Past Year Examination Question] (Submitted)

Past Year Exam Question (2025) MEB1043/MFB1043 STATICS, STATICS. [Past Year Examination Question]

Past Year Exam Question (2025) MEB2043/MFB2043 - FLUID MECHANICS I. [Past Year Examination Question] (Submitted)

Past Year Exam Question (2025) MEB2053/MFB2053 - ME THERMODYNAMICS I. [Past Year Examination Question]

Past Year Exam Question (2025) MFB3023/MEB3023 ME DESIGN, MECHANICAL ENGINEERING DESIGN. [Past Year Examination Question]

Past Year Exam Question (2025) PEB4102 - ENGINEERING ECONOMICS. [Past Year Examination Question] (Submitted)

Past Year Exam Question (2025) TDB2043 - OPERATING SYSTEMS. [Past Year Examination Question]

Past Year Exam Question (2025) TEB2043 Data Science. [Past Year Examination Question]

Past Year Exam Question (2025) TEB2053 Embedded System. [Past Year Examination Question]

Past Year Exam Question (2025) TEB3213/TFB2143 COMPUTER FORENSIC, COMPUTER FORENSIC. [Past Year Examination Question]

Past Year Exam Question (2025) VEB2093NFB2063 - HYDROLOGY. [Past Year Examination Question] (Submitted)

Past Year Exam Question (2025) YBB1053 Analytical Instrumentation. [Past Year Examination Question]

Past Year Exam Question (2025) YBB1063 Organic Chemistry I. [Past Year Examination Question]

Raza, Aaqib and Yusoff, Mohd Zuki (2025) Development of a CNN-LSTM Deep Learning Model for Motor Imagery EEG Classification for BCI Applications. Engineering, Technology and Applied Science Research, 15 (3). 22705 – 22711. ISSN 22414487

Rishi, Kumar (2025) A User-Priorities-Based Agent on Analytical Approach to Enhance QoS for Cloud Services. Doctoral thesis, UNIVERSITI TEKNOLOGI PETRONAS.

Rozaini, Muhamad Tahriri (2025) Shaping of Metal Organic Framework (MOF) for CO2 capture of biomethere by pressure swing adsorption (PSA). Doctoral thesis, UNIVERSITI TEKNOLOGI PETRONAS.

Somireddy Janga, Venkata (2025) Computational Modelling and Analysis of Thermo-Mechanical and Material Flow Characteristics in Refill Friction Stir Spot Welding (FSSW) of Thin AA7075-T6 Sheets using Advanced Meshless Smoothed Particle Hydrodynamics Approach. Doctoral thesis, UNIVERSITI TEKNOLOGI PETRONAS.

Soomro, Mahnoor (2025) Vigv and Bleed Control Schedule for Hydrogen-Fired Three Shaft Industrial Gas Turbine. Masters thesis, UNIVERSITI TEKNOLOGI PETRONAS.

Surmi, Amiza and Shariff, Azmi Mohd and Lock, Serene Sow Mun (2025) Techno-economic assessment of cryogenic Rotating Packed Beds for nitrogen removal from natural gas. Results in Engineering, 26. ISSN 25901230

TURKSON, JOSHUA NSIAH (2025) EXPERIMENTAL AND PREDICTIVE MODELING OF OIL RECOVERY AND CO2 UTILIZATION EFFICIENCY OF CARBONATED WATER INJECTION IN SANDSTONE OIL RESERVOIRS. Masters thesis, UNIVERSITI TEKNOLOGI PETRONAS.

Tijjani Usman, Ibrahim Muntaqa (2025) Comparative Study of Three Grafted Plant Based Natural Coagulants for Water Treatment. Doctoral thesis, UNIVERSITI TEKNOLOGI PETRONAS.

Tubussum, Humera (2025) Impact of Workplace Bullying on Organizational Performance: Moderating Effect of Organizational Culture. Masters thesis, UNIVERSITI TEKNOLOGI PETRONAS.

Yusuf, Jemilat Yetunde (2025) Development of Deep Eutectic Solvent-Modified Multi-Walled Carbon Nanotube-Based Conductive Polymer Composites for X-band Electromagnetic Interference Shielding. Doctoral thesis, UNIVERSITI TEKNOLOGI PETRONAS.