Welcome To UTPedia

We would like to introduce you, the new knowledge repository product called UTPedia. The UTP Electronic and Digital Intellectual Asset. It stores digitized version of thesis, final year project reports and past year examination questions.

Browse content of UTPedia using Year, Subject, Department and Author and Search for required document using Searching facilities included in UTPedia. UTPedia with full text are accessible for all registered users, whereas only the physical information and metadata can be retrieved by public users. UTPedia collaborating and connecting peoples with university’s intellectual works from anywhere.

Disclaimer - Universiti Teknologi PETRONAS shall not be liable for any loss or damage caused by the usage of any information obtained from this web site.Best viewed using Mozilla Firefox 3 or IE 7 with resolution 1024 x 768.

System Identification for SISO Systems

Rangasamy, Kirutigaa (2014) System Identification for SISO Systems. Universiti Teknologi PETRONAS. (Unpublished)

Download (3MB) | Preview


System identification is a well-established field, grew both in size and diversity over the last several decades. In addition, system identification methods can handle an extensive range of system dynamics without knowledge of the actual system physics. In this report, system identification for single-input and single-output (SISO) system and the improvisation techniques are discussed. The most significant criteria in system identification are selection of suitable model structure, excitation signal, signal to noise ratio (SNR) and frequency. This can be done by using System Identification Toolbox in MATLAB, where it will build an accurate and simplified model from complex system with noisy time-series data. Three different systems are discussed by using ARX, ARMAX and OE models. For each system, five case studies with different orders are discussed. In addition, different types of excitation signals are used in order to get the best results. The model fitting, bode plot, step response and residual plot are obtained by using System Identification Toolbox. Besides that, the mathematical equations which are used to calculate the parameters are also presented in the following section. Based on the fitting, the best models are interpreted. The results of each case study show the importance of model selection for different scenarios.

Item Type: Final Year Project
Academic Subject : Academic Department - Chemical Engineering - Separation Process
Subject: T Technology > TP Chemical technology
Divisions: Engineering > Chemical
Depositing User: Users 2053 not found.
Date Deposited: 10 Oct 2014 12:09
Last Modified: 25 Jan 2017 09:37
URI: http://utpedia.utp.edu.my/id/eprint/14190

Actions (login required)

View Item View Item

Document Downloads

More statistics for this item...