Welcome To UTPedia

We would like to introduce you, the new knowledge repository product called UTPedia. The UTP Electronic and Digital Intellectual Asset. It stores digitized version of thesis, dissertation, final year project reports and past year examination questions.

Browse content of UTPedia using Year, Subject, Department and Author and Search for required document using Searching facilities included in UTPedia. UTPedia with full text are accessible for all registered users, whereas only the physical information and metadata can be retrieved by public users. UTPedia collaborating and connecting peoples with university’s intellectual works from anywhere.

Disclaimer - Universiti Teknologi PETRONAS shall not be liable for any loss or damage caused by the usage of any information obtained from this web site.Best viewed using Mozilla Firefox 3 or IE 7 with resolution 1024 x 768.

METAL-TO-METAL SEALING FOR fflGH PRESSURE SUBSEA PRODUCTION SYSTEM (SPS) BOLTED FLANGE CONNECTOR

MOHAMMAD RADZI, NURUL HIDAYAH (2009) METAL-TO-METAL SEALING FOR fflGH PRESSURE SUBSEA PRODUCTION SYSTEM (SPS) BOLTED FLANGE CONNECTOR. Universiti Teknologi PETRONAS. (Unpublished)

[img] PDF
Download (2339Kb)

Abstract

Metal to metal seal is one type of static seal used in high pressure Subsea Production System (SPS) Bolted Flange connector. Static sealing elements, as their classification implies, remain stationary relative to the surfaces they are sealing against. The subsea system can be located many miles away in deeper water and tied back to existing host facilities in shallow water. Due to the deeper water, higher challenges and problems need to be considered such as high reservoir pressures, low sea-bed temperatures, large variations in water depth range, flow assurance challenges, geo-hazard issue like gas hydrates, rough metocean condition, remoteness and hydrostatic pressure. The first objective is to analyze how leakages occur in SPS Bolted Flange connector. Bolt, flange and seal are the three main components in Bolted Flange connector that can contribute to the excessive leakage. Once excessive leakage happens in the deepwater, there will be loss in productivity, marine pollution and other important effects that need to be highly considered. From the literature reviews, main factors due to the seal that can cause leakage are inadequate overall flatness, inadequate smoothness and seal ring breakage can be concluded. The second objective is to propose and demonstrate the applicability of metal to metal sealing of SPS Bolted Flange connector for deepwater application. Temperature, pressure, industry design codes, life expectancy, leakage integrity and maintenance and accessibility are the key elements in selection of metal seal for SPS Bolted Flange connector. For this project, metal O-Ring has been chosen as the design for metal seal inside SPS Bolted Flange connector because its characteristics meet the deepwater and subsea requirements. The comparison has been made between Stainless Steel AISI 321, Alloy 600 and Alloy X750 by calculating the pressure exerted on the metal seal. All these materials satisfy subsea requirement but Stainless Steel AISI 321 has been chosen for metal ORing inside Bolted Flange connector due to cost consideration.

Item Type: Final Year Project
Academic Subject : Academic Department - Mechanical Engineering - Materials - Engineering materials - Metals alloys - Morphology
Subject: T Technology > TJ Mechanical engineering and machinery
Divisions: Engineering > Mechanical
Depositing User: Users 2053 not found.
Date Deposited: 22 Oct 2013 12:08
Last Modified: 22 Oct 2013 12:08
URI: http://utpedia.utp.edu.my/id/eprint/9389

Actions (login required)

View Item View Item

Document Downloads

More statistics for this item...