Items where Department / MOR is "Geoscience and Petroleum Engineering" and Year is 2012

Group by: Creators | Item Type | No Grouping

Jump to: Thesis | Final Year Project | Past Year Examination Question

Number of items: 231.

Thesis

CHALABI, AICHA (2012) Remote Sensing Analysis Of Recent Carbonate Platforms East Of Sabah: Potential Analogues To Miocene Carbonate Platforms Of The South China Sea. PhD. thesis, Universiti Teknologi PETRONAS.

KANIA, DINA (2012) FATTY ACID METHYL ESTER FROM JATROPHA CURCAS OIL AS A NEW (ECOFRIENDLY) BASED DRILLING FLUID. Masters thesis, Universiti Teknologi PETRONAS.

SAUKI, ARINA (2012) PHYSICO-CHEMICAL STUDY OF CEMENT DEGRADATION IN THE PRESENCE OF CO2. Masters thesis, Universiti Teknologi PETRONAS.

Final Year Project

ABDUL RASIB, AMIRA (2012) DRAG REDUCING AGENT BY WATER INJECTION USING NATURAL POLYMER (Solanum Tuberosum). [Final Year Project] (Unpublished)

ABDULLAH, MUHAMMAD SYAHIR (2012) PETROPHYSICAL PROPERTIES IN LIMESTONES AT GUNUNG KANTAN SUNGAI SIPUT, PERAK, MALAYSIA. [Final Year Project] (Unpublished)

ADIB ZULHILMI BIN MOHD ALIAS, ADIB ZULHILMI (2012) MATHEMATICAL MODELING OF HEAT TRANSFER IN MULTILATERAL WELL. [Final Year Project] (Unpublished)

AHMAD, NOOR AFIQAH (2012) Mitigation of Calcium Carbonate (CaCO3) Inorganic Scaling using Green Inhibitors. [Final Year Project] (Unpublished)

AHMAD FARIS HAFIZI BIN AHMAD PAUZI, AHMAD FARIS HAFIZI (2012) Assessing Reservoir Performance and Modeling using Prosper for Idle Well Reactivation. [Final Year Project] (Unpublished)

AINIL IZZYAN NAFFI, AINIL (2012) STUDY ON HYDRAULIC FRACTURING FLUID SELECTION TO MAXIMIZE EFFECTIVE HYDRAULIC FRACTURE LENGTH. [Final Year Project] (Unpublished)

AZATUL ITRI BT RORZLAN, AZATUL (2012) Evaluation of Polyaspartate for mitigating BaSO4 scaling. [Final Year Project] (Unpublished)

Abd Rahman, Iz’aan ‘Irfan (2012) Effect of Drag Reducing Agents (DRA) in Water Injection Well. [Final Year Project] (Unpublished)

Abdul Hamid, Nurulhuda (2012) Phase Behavior Comparison for Pure Components using Equation of State (EOS). [Final Year Project] (Unpublished)

Abdul Rahman, MUHAMMAD ZULHILMI (2012) RESEARCH ON EVALUATING SYNTHETIC HTHP FLUID LOSS REDUCER IN VARIOUS OIL BASE DRILLING FLUIDS. [Final Year Project] (Unpublished)

Adnan bin Hanapai, Adnan (2012) Design Methodology of Overshot Inverted Swellable Elastomer Packer. [Final Year Project] (Unpublished)

Afiq Hanafi Bin Mohd Ramli, Afiq Hanafi (2012) ETRO as a New Oil-Based Drilling Fluid for High Pressure High Temperature and Deepwater Well. [Final Year Project] (Unpublished)

Afiq Safeeuddin bin Nordin, Afiq Safeeuddin (2012) Enhancement of Kinetic Hydrate Inhibitor Polyvinylpyrrolidone(PVP) with Addition of Polyethyleneoxide (PEO). [Final Year Project] (Unpublished)

Ahmad Faheem Bin Md Sani, Ahmad Faheem (2012) Drag Reducing Agent for Water System Using Natural Polymer (Aloe Vera). [Final Year Project] (Unpublished)

Ahmad Haziq b Mohd Shah Zainudin, Ahmad Haziq (2012) Estimation of Pressure Drop and Liquid Holdup for Oil-Gas 2 Phase Flow through Vertical Tubing String. [Final Year Project] (Unpublished)

Ahmad Hisyam Rosaimi Bin Hassim, Ahmad Hisyam Rosaimi (2012) The Effect of Permeability towards Coalbed Methane (CBM) Production. [Final Year Project] (Unpublished)

Ahmed Fatah Alrahman Ahmed Mohammed, Ahmed Fatah (2012) Effect of Different Drilling Fluids on Reservoir Skin Factor. [Final Year Project] (Unpublished)

Ahmed Fatah Alrahman Ahmed Mohammed, Ahmed Fatah Alrahman (2012) Simulation Study of Polymer Flooding in Naturally Fractures Reservoirs. [Final Year Project] (Unpublished)

Ahmed Nabil B Zakaria, Ahmed Nabil (2012) Drag Reducing Agent for Water System Using Natural Polymer (Hibiscus leaves). [Final Year Project] (Unpublished)

Aiman Ajmal Bin Kamaruzaman, Aiman (2012) FACIES AND RESERVOIR CHARACTERISTICS OF CROSS-BEDDED AND PLANE-BEDDED SANDSTONE. [Final Year Project] (Unpublished)

Ainin Nurfarahim Binti Hamdan, Ainin (2012) Drillstring Design in ERD Based on Torque and Drag Analysis using WellPlan. [Final Year Project] (Unpublished)

Ali Mahmoudi, Ali Mahmoudi (2012) Improvement of Cement Placement in Horizontal Wells by Liner Rotation Using CFD. [Final Year Project] (Unpublished)

Amani Bin Hasim, Khairul (2012) EFFECT OF FLUID CHARACTERIZATION IN MINIMUM MISCIBLE PRESSURE PREDICTION USING MIXING CELL METHOD. [Final Year Project] (Unpublished)

Amanov, Nurjan (2012) Designing a cement program for Extended Reach Drilling well using Landmark software. [Final Year Project] (Unpublished)

Arun S/O Balachandran, Balachandran (2012) EVALUATION OF PALM OIL BASED FATTY ACIDS FOR SYNTHESIS OF EMULSIFIER IN DRILLING FLUIDS. [Final Year Project] (Unpublished)

Azri Hariz bin Abdul Raof, Azri (2012) Facies and Reservoir Characteristics of Cross-Bedded and Plane-Bedded Sandstone. [Final Year Project] (Unpublished)

Azrul Azwar bin Samsuddin, Azrul (2012) ASSESSMENT OF THE FRICTION AND WEAR BEHAVIOR OF DRILLING TOOLS. [Final Year Project] (Unpublished)

Bior Atem Bior Barach, Bior Atem Bior Barach (2012) THE STUDY OF HYSTERESIS EFFECT ON WAG INJECTION. [Final Year Project] (Unpublished)

Brian anak Nyambang, Dexter (2012) Mineralogy and Microscopy of Some Sedimentary Rocks in Sarawak. [Final Year Project] (Unpublished)

CALVIN LOWRANS, CALVIN LOWRANS (2012) OPTIMISING DRILLING FLUID TO MAINTAIN MUDSTONE FORMATION STABILITY. [Final Year Project] (Unpublished)

Chian, Chiew Kwang (2012) Simulation Study on Water-Alternating-Gas (WAG) Injection with Different Schemes and Types of Gas in a Sandstone Reservoir. [Final Year Project] (Unpublished)

Darren Wong Vun Nyap, Darren (2012) ASSESSMENT OF SUSTAINED CASING PRESSURE ON WELL INTEGRITY. [Final Year Project] (Unpublished)

EDDIE MAZWAN BIN OTHMAN, EDDIE MAZWAN BIN OTHMAN (2012) Developing non-Chemical Flow Assurance Strategies for Petroleum Production Systems. [Final Year Project] (Unpublished)

FAHMI AMNI BIN MUSTAFAAL BAKERI, FAHMI AMNI BIN (2012) NANO-EMULSION FOR PRODUCTION ENHANCEMENT PURPOSE. [Final Year Project] (Unpublished)

Fadzil, Muhammad Redha (2012) Alkaline Flooding of Low Acid Number Crude Oil. [Final Year Project] (Unpublished)

Farah Amalina Azianti Bt Azmi, Farah Amalina Azianti (2012) Mathematical Modeling of Wellbore Flow Behavior in Multilateral Wells. [Final Year Project] (Unpublished)

Faris, Faris (2012) Drilling Fluid. [Final Year Project] (Unpublished)

GHAZALI, MUHAMMAD FAIZAL (2012) DRAG REDUCING AGENT FOR WATER INJECTION USING SURFACTANT (SODIUM STEARATE). [Final Year Project] (Unpublished)

HAHIJARY, TIRZA (2012) PERFORMANCE OF DIFFERENT ACIDS WITH VARIOUS FORMULATIONS FOR SANDSTONE FORMATIONS (TERENGGANU SAND). [Final Year Project] (Unpublished)

Hafizul Naim Bin Baniram, Hafizul Naim (2012) Designing a Cement Program by Using Landmark Software at HPHT Well. [Final Year Project] (Unpublished)

Hamzah, Muhammad Haris (2012) ROCK GEOMETRY WITH COMPARISON TO POROSITY MEASUREMENT. [Final Year Project] (Unpublished)

Ikhwanul Hafizi bin Musa, Ikhwanul Hafizi (2012) Enhanced Coal Bed Methane Recovery by Gas Injection. [Final Year Project] (Unpublished)

Irshad Fajar, Irshad (2012) Calophyllum inophyllum Oil as Novel, Green and Low Cost Ester-Based Drilling Fluids. [Final Year Project] (Unpublished)

JACOB ADILLAH, BENJAMIN (2012) PERMEABILITY PREDICTION USING NUCLEAR MAGNETIC RESONANCE. [Final Year Project] (Unpublished)

JAMALIATUL MUNAWWARAH MOHD ALISJABANA, JAMALIATUL (2012) NUMERICAL MODELING OF PRESSURE DROP IN SUBSURFACE SAFETY VALVES. [Final Year Project] (Unpublished)

Jagaan Selladurai, Jagaan (2012) Optimization of Malaysian Mica in Oil Based Mud. [Final Year Project] (Unpublished)

Juan, Saw Li (2012) Minimum Miscibility Pressure Investigation for Carbon Dioxide Injection with Different Malaysian Light Oil Samples. [Final Year Project] (Unpublished)

KOH LIANG YI, KOH LIANG YI (2012) A STUDY OF WAG AND FAWAG INJECTION INDUCED ASPHALTENE PRECIPITATION IN LIGHT OIL RESERVOIR. [Final Year Project] (Unpublished)

LIM HWEI SHAN, LIM HWEI (2012) Simulation Studies on the Effect of Asphaltene Precipitation on Oil Recovery during CO₂ Injection for Light Oil Reservoir. [Final Year Project] (Unpublished)

Lim Win Shen, Lim Win Shen (2012) Effect of Drag Reducing Agent on Water injection Well. [Final Year Project] (Unpublished)

M.Sukrey, Anis Nadiah (2012) Sand production problem. [Final Year Project] (Unpublished)

MARUT DAMKAEW, MARUT DAMKAEW (2012) STUDY OF COCONUT OIL AS OIL BASED FLUID IN DRILLING OPERATION. [Final Year Project] (Unpublished)

MAT DAIT, MUHAMMAD HAFIZ IZUDDIN (2012) PETROGRAPHY AND PETROPHYSICAL CHARACTERIZATION OF CARBONATE ROCKS FROM GUNUNG RAPAT, PERAK, MALAYSIA. [Final Year Project] (Unpublished)

MOHAMAD FIKREE BIN OTHMAN, MOHAMAD FIKREE (2012) EFFECTIVENESS OF PVP AND CMA AS HYDRATE INHIBITOR. [Final Year Project] (Unpublished)

MOHAMMED AHMED OMER, MOHAMMED AHMED (2012) Drillstring Vibration Analysis in Extended Reach Drilling (ERD) using WELLPLANTM. [Final Year Project] (Unpublished)

MOHD NOOR, AHMAD SYAFIQ (2012) EXPERIMENTAL INJECTION STRATEGY FOR SURFACTANT FLOODING ENHANCED BY BRANCHED ALCOHOL ADDITIVE. [Final Year Project]

MOHD RAZMI ZIQRI BIN AHMAD SHUKRI, MOHD (2012) Drilling Fluid Study: Evaluating the Quantitative Determination Method of Partially-Hydrolyzed Polyacrylamide (PHPA) Polymer in Drilling Fluid. [Final Year Project] (Unpublished)

MOHD SALLEHUDIN BIN ABDULLAH, MOHD SALLEHUDIN (2012) EFFECT OF PRESSURE AND TEMPERATURE DISTRIBUTION TO THE DRILLING FLUID DENSITY FOR MANAGED PRESSURE DRILLING (MPD) APPLICATIONS. [Final Year Project] (Unpublished)

MUHAMMAD ASLAM YUSUF BIN MUSA, MUHAMMAD ASLAM YUSUF (2012) PERFORMANCE OF DIFFERENT ACIDS FOR ACIDIZING TREATMENT IN SANDSTONE FORMATION (PANGKOR SAND). [Final Year Project] (Unpublished)

MUHAMMAD ZAHIN BIN ABD RAZAK, MUHAMMAD ZAHIN (2012) STUDY OF SESAME OIL AS OIL BASED FLUID IN DRILLING OPERATION. [Final Year Project] (Unpublished)

MUTWAKIL MOHAMED ABDU, MIHRAB (2012) SIMULATION STUDY ON OIL SWELLING DURING CO2 INJECTION FOR LIGHT OIL SAMPLES. [Final Year Project] (Unpublished)

Makuach James Makeny, Makuach (2012) Simulation of Drilled Cuttings Transport through an Inclined Wellbore by Using CFD. [Final Year Project] (Unpublished)

Maziah binti Abu Mukhtar, Maziah (2012) Mechanism of Alkaline Flooding in Low Acid Number Crude. [Final Year Project] (Unpublished)

Mohamad Aliff Muniff Bin Mohd Nasir, Mohamad Aliff Muniff (2012) The Enhancement of Non-Destructive Testing (NDT) through Active Thermal Infrared Thermography to Identify Internal Piping Failure. [Final Year Project] (Unpublished)

Mohamad Azir Syazwan Bin Sufri, Mohamad Azir (2012) Study on Rice Husk as Lost Circulation Material. [Final Year Project] (Unpublished)

Mohamad Faizzudin B Mat Piah, Mohamad Faizzudin (2012) Enhanced Oil Recovery Field Development: Process Flow of EOR Selection for Sandstone Formation. [Final Year Project] (Unpublished)

Mohamad Haikal Bin Nordin, Mohamad (2012) Identifying and Evaluating Potential Inhibitors to Treat Downhole Asphaltene Precipitation using UV-Visible Spectrometer. [Final Year Project] (Unpublished)

Mohd Ashraf Bin Nor Azrol, Mohd Ashraf Bin Nor Azrol (2012) Well Configuration Design for Water Alternating Gas. [Final Year Project] (Unpublished)

Mohd Jamal, Marlina Iylia (2012) Phase Equilibrium Measurement of Methane Hydrate with Hydrate Promoters. [Final Year Project] (Unpublished)

Mohd Noor, Ahmad Syafiq (2012) EXPERIMENTAL INJECTION STRATEGY FOR SURFACTANT FLOODING ENHANCED BY BRANCHED ALCOHOL ADDITIVE. [Final Year Project] (Unpublished)

Mohd Shahnizam Khairuddin, Mohd (2012) EFFECT OF ELEVATION TO THE GAS AND OIL PIPELINE FOCUSING ON PRESSURE DROP BY USING NODAL ANALYSIS. [Final Year Project] (Unpublished)

Mohd Zarawi, Mohd Majdan (2012) The New Biodegradable Surfactant Drilling Fluid for Offshore Drilling Environment. [Final Year Project] (Unpublished)

Mohd Zulkifli, Nik Mohd Qusyairi (2012) Phase Behavior Study of Branched Alcohols as Additives in Surfactant Flooding. [Final Year Project] (Unpublished)

Moju Moses Duku Oliver, Moju Moses Duku Oliver (2012) Application of Inflow Control Device (ICD) for Optimizing Horizontal Well Performance. [Final Year Project] (Unpublished)

Muhamad Fazrin Bin Md Raus, Muhamad Fazrin Bin Md Raus (2012) Simulation of Onshore and Offshore Facility Flare Gas Reutilization in an Energy Recovery Scheme. [Final Year Project] (Unpublished)

Muhamad Firdaus Bin Zaini, Muhamad Firdaus (2012) The Enhancement of NDT Techniques through Active Thermal Infrared Thermography to Identify Corrosion under Insulation (CUI) in Downstream Piping. [Final Year Project] (Unpublished)

Muhammad Aizuddin B. Mohammad Roslan, Muhammad Aizuddin (2012) Gas Lift Optimization Of Bayan Wells Using PROSPER. [Final Year Project] (Unpublished)

Muhammad Amin Nizar Bin Che Abd Razak, Muhammad Amin (2012) EVALUATION OF LOW RESISTIVITY LOW CONTRAST RESERVOIR. [Final Year Project] (Unpublished)

Muhammad Ashraf bin Mohd Fahari, Muhammad Ashraf (2012) Designing Prototype of Acoustic & Resistivity Transducer. [Final Year Project] (Unpublished)

Muhammad Luqman Bin Hasan, Muhammad Luqman (2012) The Comparison of Different Types of Chemicals as Fluid Loss Control Additives in Synthetic Base Mud. [Final Year Project] (Unpublished)

Muhammad Naquib Bin Kamarul zaman, Muhammad Naquib (2012) Drag Reducing Agents for Water Injection using Natural Polymer(Mung Beans). [Final Year Project] (Unpublished)

Muhammad Raimi Bin Johari, Muhammad Raimi (2012) THE RELATIONSHIP BETWEEN PORE SPACE AND GRAIN SIZE. [Final Year Project] (Unpublished)

Muhammad Syahmi Azri Md Zanil, Muhammad Syahmi Azri (2012) Improvement of CO2 MMP Correlations by Incorporating Paraffinicity Factor. [Final Year Project] (Unpublished)

Muhammad Zulhilmi bin Muhammad, Muhammad Zulhilmi (2012) Study on the Effect of Different Ratio of Primary and Secondary Emulsifier in Drilling Fluid. [Final Year Project] (Unpublished)

Muhammad Zul’Aizat Mohd Zulkifli, Muhammad Zul’Aizat (2012) RESEARCH ON EVALUATING MICRO SIZE PARTICLE MATERIAL OF JATROPHA AS FLUID LOSS REDUCER IN SYNTHETIC HTHP DRILLING FLUIDS. [Final Year Project] (Unpublished)

NADIA ‘IZZATI BTE MOHAMED KHIROL AMIN, NADIA ‘IZZATI (2012) To Determine the Efficiency of Polyvinylpyrrolidone (PVP) and Polyacrylamide (PAM) as Drag Reducing Agent for Water Injection. [Final Year Project] (Unpublished)

NAHVIN JAYARATNAM, NAHVIN (2012) WELL INTEGRITY ASSURANCE IN EOR INJECTION WELLS THROUGH THE LENS OF THERMAL PROPERTIES OF PORTLAND CEMENT. [Final Year Project] (Unpublished)

NGUYEN THE THAO, NGUYEN THE THAO (2012) DEVELOPING A MATHEMATICAL MODEL FOR HYDRAULIC FRACTURING IN MICROSOFT EXCEL. [Final Year Project] (Unpublished)

NIK MOHAMMAD FADHLAN BIN NIK KAMARUDDIN, NIK MOHAMMAD FADHLAN (2012) INVESTIGATION OF THE IMPACT OF SALINITY ON ASPHALTENE PRECIPITATION DURING WAG-CO2 INJECTION FOR A MALAYSIAN LIGHT OIL. [Final Year Project] (Unpublished)

NOOR „ALIAA AMIRA BINTI MOHD FAUZI, NOOR „ALIAA AMIRA (2012) Performance Of Different Acids For Acidizing Treatment In Sandstone Formation (Terengganu). [Final Year Project] (Unpublished)

NOR AINI BT DAUD @ ABDUL RAHIM, NOR AINI (2012) EVALUATION OF PERFORMANCE ON RESIN COATED LOCAL SAND. [Final Year Project] (Unpublished)

NUR AZLIZA BINTI MOHD FUZI, NUR AZLIZA (2012) MECHANISM OF FORMATION DAMAGE USING ALKALINE FLOODING. [Final Year Project] (Unpublished)

Nathan, Kumar (2012) Numerical Modeling of the Flow of Fluids and Energy in EOR Injection Wells Using PROSPER. [Final Year Project] (Unpublished)

Nautiss Vijayakumar, Nautiss Vijayakumar (2012) A Comparative Study of Inflow Performance Models for Multilateral Wells under Single and 2-Phase Flow Production Conditions. [Final Year Project] (Unpublished)

Nik Fazril Ain Binti Sapian, Nik Fazril Ain (2012) Evaluation on Effectiveness of Ionic Liquids as Kinetic Hydrates Inhibitor Using Micro Differential Scanning Calorimeter (μ DSC). [Final Year Project] (Unpublished)

Nilton César Mugabe, Nilton César Mugabe (2012) OPTIMIZED FDP DESIGN PROCESS FLOW FROM RESERVOIR MODEL. [Final Year Project] (Unpublished)

Nur Emmi Anieshya Binti Saleh, Nur Emmi (2012) New Drilling Fluid Formulation Using 750 Molecular Weight Polyethylene Glycol Base Surfactant Derived From Natural Oil. [Final Year Project] (Unpublished)

Nur Fadzliana Azmi, Nur Fadzliana (2012) Improvement in MMP Predictions Using Paraffin Number. [Final Year Project] (Unpublished)

Nur Hidayatul Asmaa’ Sazli, Nur Hidayatul Asmaa’ Sazli (2012) IDENTIFYING RESERVOIR COMPARTMENTALIZATION USING FIELD DATA – FIELD X CASE STUDY. [Final Year Project] (Unpublished)

Nurfarah Shazlina Binti Zulkifli, Nurfarah (2012) Inhibiting Gas Hydration Using Surfactant. [Final Year Project] (Unpublished)

Nurliana binti Alias, Nurliana (2012) A STUDY OF PRODUCTION OPTIMIZATION USING PROSPER. [Final Year Project] (Unpublished)

Nurliyana Zadora Binti Choe, Nurliyana Zadora (2012) Investigation of the Thermal Effects on the Flow Resisting Properties of Hydrocarbon Flow in a Pipeline Using CFD Simulation. [Final Year Project] (Unpublished)

Nurul Nadia Ezzatty Bt Abu Bakar, Nurul Nadia Ezzatty (2012) To Evaluate Effectiveness of Polyacrylamide (PAM), Polyvinylpyrrolidone (PVP), and Polyethyleneoxide (PEO) as Drag Reducing Agent for Water System. [Final Year Project] (Unpublished)

ONG SHEAU , HUN (2012) A Study of CO2 and WAG Injection Induced Asphaltene Precipitaion. [Final Year Project] (Unpublished)

Pamok Taamsri, Pamok Taamsri (2012) Enhancement of Silica Sand by Resin Coating for Sand Control Application. [Final Year Project] (Unpublished)

Preveen Kumar A/L Rajan, Preveen (2012) STUDY ON CASTOR OIL AS OIL BASED FLUID IN DRILLING OPERATION. [Final Year Project] (Unpublished)

Priveetha Manogaran, Priveetha (2012) Investigation Study on the Strength Properties of Local Sand as Proppant. [Final Year Project] (Unpublished)

RAHIM, MUHAMMAD AFIQ (2012) EVALUATION OF PALM OIL BASED FATTY ACID FOR SYNTHESIS OF EMULSIFIER FOR DRILLING FLUIDS. [Final Year Project] (Unpublished)

RAZALI, NOR AMIRAH (2012) HYDRATES INHIBITION USING IONIC LIQUID. [Final Year Project] (Unpublished)

ROSSHAMILA AFIFAH BINTI MUDA, ROSSHAMILA AFIFAH (2012) Comparison between Two Surfactants (Sodium Oleate and Sodium Stearate)As Drag Reducing Agent in Water System. [Final Year Project] (Unpublished)

Rian Farisha Bt Ajaz Ahmad Khan, Rian (2012) Hydrate Phase Equilibrium for Methane in Synthetic Seawater. [Final Year Project] (Unpublished)

Rina, Buoy (2012) MULTI-WELL DRAINAGE AREA CALCULATION BASED ON DIFFUSIVE TIME OF FLIGHT: A NOVEL APPROACH FOR QUICK PRODUCTION FORECAST FOR CBM FIELDS. [Final Year Project] (Unpublished)

Rohaizreen Irdayu Binti Mohd Radzi, Rohaizreen Irdayu (2012) Investigation on Coating Materials to Enhance Sand Proppant Performance for Sand Production Control. [Final Year Project] (Unpublished)

Rosya Ila Binti Abdul Hamid, Rosya Ila (2012) Study of Minimum Miscibility Pressure of Malaysian Light Oil Samples Using Different Type of Gases. [Final Year Project] (Unpublished)

SALLEH, NURUL FADHILAH (2012) TO DETERMINE THE EFFICIENCY OF POLYAERYLAMIDE AND PVP AS DRAG REDUCING AGENT IN WATER FLOW SYSTEM. [Final Year Project] (Unpublished)

SITI NORFARIHA MAT HASBI, SITI (2012) Pore Pressure Analysis In Fine Sediment. [Final Year Project] (Unpublished)

Salleh, Nurul Fadhilah (2012) To Determine the Efficiency of Polyacrylamide and PVP as Drag Reducing Agent in Water Flow System. [Final Year Project] (Unpublished)

Sayidolimkhon Mirzaev, Sayidolimkhon Mirzaev (2012) Effect of Drillpipe Rotation on Cuttings Transport in Horizontal Wellbore Section. [Final Year Project] (Unpublished)

Sermphon Klaiseengern, Sermphon Klaiseengern (2012) Comparing Compositional and Black Oil Models in Simulating Miscible C O2 Injection. [Final Year Project] (Unpublished)

Sin, Chey Wan (2012) Hole Cleaning Analysis for Underbalanced Drilling by Using Landmark. [Final Year Project] (Unpublished)

Siti Nor Dahliawati bt Zulkefli, Siti Nor (2012) PERFORMANCE OF DIFFERENT ACIDS WITH VARIOUS FORMULATIONS FOR SANDSTONE FORMATION (PANGKOR SAND). [Final Year Project] (Unpublished)

Sufian Bin Abd Hamid, Sufian (2012) Prediction of Asphaltenes Behaviors in Reservoir during CO2 Injection. [Final Year Project] (Unpublished)

Suria Melanie Binti Mohammad, Suria Melanie (2012) To Determine the Efficiency of Wormlike Micelle as Drag Reducing Agent (DRA) for Flow Assurance. [Final Year Project] (Unpublished)

Syafiq Syazwan Bin Abdullah, Syafiq (2012) Evaluation of Sugarcane Bagasse as Lost Circulation Materials. [Final Year Project] (Unpublished)

Syakir Aslam Bin Mohamad Poad, Syakir Aslam (2012) The toxicity effects of water based mud with different additives on aquatic life. [Final Year Project] (Unpublished)

Syazwani Bt Mohd Sariffuddin, Syazwani (2012) Effect of Natural Polymer as Kinetic Hydrate Inhibitor Using Micro Differential Scanning Calorimetry (μDSC). [Final Year Project] (Unpublished)

Syed Hamimie Fakhri bin Syed Mohamad, Syed Hamimie Fakhri (2012) Resistivity Modeling of Shaly Sand Formation in High Water Salinity. [Final Year Project] (Unpublished)

TASHKENBAEV, TIMUR (2012) CASING DESIGN FOR EXTENDED REACH WELLS BY USING CASINGSEAT AND STRESSCHECK SOFTWARE. [Final Year Project] (Unpublished)

Taufiq bin Ahmad, Taufiq (2012) EFFECT OF NANO MATERIAL (GRAPHENE) IN OIL BASED DRILLING MUD. [Final Year Project] (Unpublished)

Teoh , Wan Ru (2012) Investigation Of Asphaltenes Onset Pressure (AOP) In Low Asphaltenic Light Oil Samples. [Final Year Project] (Unpublished)

Tham Keat Fu, Tham (2012) Computational Fluid Dynamics Simulation For Cuttings-Liquid Flow Through Horizontal Eccentric Annuli. [Final Year Project] (Unpublished)

Thian Hui Chie, Thian (2012) The New Biodegradable Surfactant Drilling Fluid for Offshore HPHT Drilling Environment. [Final Year Project] (Unpublished)

Umdao Nopparat, Umdao Nopparat (2012) RESEARCH STUDY ON FINDING A NEW SYNTHETIC OIL BASED MUD FROM ORGANIC MATERIAL (METHYL ESTER OF CASTOR OIL). [Final Year Project] (Unpublished)

WIN AHKAR MEIN, WIN AHKAR MEIN (2012) ANALYSIS ON VARIOUS FACTORS AFFECTING PRESSURE DROP ALONG THE GAS TRANSPORTATION PIPELINE DESIGN. [Final Year Project] (Unpublished)

Wan Izzul Fathi Bin Hamdan, Wan Izzul Fathi (2012) Investigate the Thermal Effects on Flow Resisting Properties of Hydrocarbons in a Pipeline [EXPERIMENT]. [Final Year Project] (Unpublished)

Wan Mahmood, Wan Abdullah (2012) Optimization of the Feldspar Usage in High Temperature Drilling Fluid. [Final Year Project] (Unpublished)

William Liew Sin Yoong, William (2012) Calculations of Equivalent Circulating Densities (ECDs) in Underbalanced Drilling Using Landmark WELLPLAN. [Final Year Project] (Unpublished)

Yunus Tagayev, Yunus (2012) TESTING COCONUT SHELLS, SEASHELLS AND SARAWAK COAL AS CEMENT ADDITIVES FOR HPHT WELLS CEMENTING. [Final Year Project] (Unpublished)

Zainor Ashfa B. Abdul Nazir, Zainor (2012) Well Control in Extended Reach Drilling (ERD) Well by Using WELLPLAN Software. [Final Year Project] (Unpublished)

Zaiyinul Ain Bin Zainal Rafit, Zaiyinul Ain (2012) A Comparison Study of Malaysian Mica as Loss Circulation Material in High Pressure High Temperature Drilling Fluid. [Final Year Project] (Unpublished)

Past Year Examination Question

Past Year Exam Question (2012) CAB1043 PCB1043 PETROLEUM ENGINEERING THERMODYNAMICS. [Past Year Examination Question]

Past Year Exam Question (2012) CCB2033 HEAT TRANSFER DESIGN. [Past Year Examination Question]

Past Year Exam Question (2012) FAP0015 PHYSICS I. [Past Year Examination Question]

Past Year Exam Question (2012) FAT0025 FUNDAMENTAL OF PROGRAMMING II. [Past Year Examination Question]

Past Year Exam Question (2012) MAB4613 PAB4513 PETROLEUM EXPLORATION. [Past Year Examination Question]

Past Year Exam Question (2012) MAB4643 PAB4533 DRILLING AND PRODUCTION TECHNOLOGY. [Past Year Examination Question]

Past Year Exam Question (2012) PAB1013 PCB1013 STATICS AND DYNAMICS. [Past Year Examination Question]

Past Year Exam Question (2012) PAB1033 PCB103 RESERVOIR ROCK AND FLUID PROPERTIES. [Past Year Examination Question]

Past Year Exam Question (2012) PAB1033 PCB1033 RESERVOIR ROCK AND FLUID PROPERTIES. [Past Year Examination Question]

Past Year Exam Question (2012) PAB2013 PCB2013 RESERVOIR GEOSCIENCE. [Past Year Examination Question]

Past Year Exam Question (2012) PAB2024 PCB2033 DRILLING ENGINEERING. [Past Year Examination Question]

Past Year Exam Question (2012) PAB2053 PCB2023 PRINCIPLES OF RESERVOIR ENGINEERING RESERVOIR ENGINEERING I. [Past Year Examination Question]

Past Year Exam Question (2012) PAB2053 PRINCIPLES OF RESERVOIR ENGINEERING. [Past Year Examination Question]

Past Year Exam Question (2012) PAB2073 FACILITIES ENGINEERING. [Past Year Examination Question]

Past Year Exam Question (2012) PAB2084 PCB2084 WELL LOGGING AND FORMATION EVALUATION. [Past Year Examination Question]

Past Year Exam Question (2012) PAB2084 WELL LOGGING AND FORMATION EVALUATION. [Past Year Examination Question]

Past Year Exam Question (2012) PAB2094 WELL COMPLETIONS AND PRODUCTION. [Past Year Examination Question]

Past Year Exam Question (2012) PAB3013 WELL TEST ANALYSIS. [Past Year Examination Question]

Past Year Exam Question (2012) PAB3023 PETROLEUM ECONOMICS. [Past Year Examination Question]

Past Year Exam Question (2012) PAB3053 RESERVOIR MODELING AND SIMULATION. [Past Year Examination Question]

Past Year Exam Question (2012) PAB4013 GAS FIELD ENGINEERING. [Past Year Examination Question]

Past Year Exam Question (2012) PAB4213 ADVANCED WELL TEST ANALYSIS. [Past Year Examination Question]

Past Year Exam Question (2012) PAB4223 ENHANCED OIL RECOVERY. [Past Year Examination Question]

Past Year Exam Question (2012) PAB4233 ADVANCED RESERVOIR SIMULATION. [Past Year Examination Question]

Past Year Exam Question (2012) PAB4313 PETROLEUM PRODUCTION OPTIMIZATION. [Past Year Examination Question]

Past Year Exam Question (2012) PAB4323 WELL STIMULATION TECHNIQUES. [Past Year Examination Question]

Past Year Exam Question (2012) PAB4333 ADVANCED DRILLING ENGINEERING. [Past Year Examination Question]

Past Year Exam Question (2012) PAB4523 RESERVOIR ENGINEERING. [Past Year Examination Question]

Past Year Exam Question (2012) PCB1013 STATICS AND DYNAMICS. [Past Year Examination Question]

Past Year Exam Question (2012) PCB1023 INTRODUCTION TO PETROLEUM GEOSCIENCE. [Past Year Examination Question]

Past Year Exam Question (2012) PCB1033 PAB1033 RESERVOIR ROCK AND FLUID PROPERTIES. [Past Year Examination Question]

Past Year Exam Question (2012) PCB1043 PETROLEUM ENGINEERING THERMODYNAMICS. [Past Year Examination Question]

Past Year Exam Question (2012) PCB2013 PAB2013 RESERVOIR GEOSCIENCE. [Past Year Examination Question]

Past Year Exam Question (2012) PCB2013 RESERVOIR GEOSCIENCE. [Past Year Examination Question]

Past Year Exam Question (2012) PCB2023 RESERVOIR ENGINEERING I. [Past Year Examination Question]

Past Year Exam Question (2012) PCB2033 DRILLING ENGINEERING. [Past Year Examination Question]

Past Year Exam Question (2012) PCB2053 RESERVOIR ENGINEERING II. [Past Year Examination Question]

Past Year Exam Question (2012) QAB1013 PHYSICAL GEOLOGY. [Past Year Examination Question]

Past Year Exam Question (2012) QAB1034 MINERALOGY AND PETROGRAPHY. [Past Year Examination Question]

Past Year Exam Question (2012) QAB1044 PALAENTOLOGY AND STATIGRAPHY. [Past Year Examination Question]

Past Year Exam Question (2012) QAB1044 PALAEONTOLOGY AND STRATIGRAPHY. [Past Year Examination Question]

Past Year Exam Question (2012) QAB1044 PALEONTOLOGY AND STRATIGRAPHY. [Past Year Examination Question]

Past Year Exam Question (2012) QAB1053 STRUCTURAL GEOLOGY. [Past Year Examination Question]

Past Year Exam Question (2012) QAB2013 GEOCHEMISTRY. [Past Year Examination Question]

Past Year Exam Question (2012) QAB2023 CLASTIC SEDIMENTOLOGY AND PETROGRAPHY. [Past Year Examination Question]

Past Year Exam Question (2012) QAB2033 CARBONATE SEDIMENTOLOGY AND PETROGRAPHY. [Past Year Examination Question]

Past Year Exam Question (2012) QAB2044 SEISMIC METHODS. [Past Year Examination Question]

Past Year Exam Question (2012) QAB2054 SEISMIC INTERPRETATION. [Past Year Examination Question]

Past Year Exam Question (2012) QAB3012 DRILLING AND PRODUCTION TECHNOLOGY. [Past Year Examination Question]

Past Year Exam Question (2012) QAB3012 MAB4643 DRILLING AND PRODUCTION. [Past Year Examination Question]

Past Year Exam Question (2012) QAB3013 SEISMIC WAVES AND IMAGING. [Past Year Examination Question]

Past Year Exam Question (2012) QAB3023 ROCK PHYSICS AND AVO ANALYSIS. [Past Year Examination Question]

Past Year Exam Question (2012) QAB3033 BASIN ANALYSIS AND PETROLEUM SYSTEM. [Past Year Examination Question]

Past Year Exam Question (2012) QAB3043 RESERVOIR CHARACTERIZATION AND MODELING. [Past Year Examination Question]

Past Year Exam Question (2012) QAB4013 REGIONAL AND PETROLEUM GEOLOGY OF MALAYSIA. [Past Year Examination Question]

Past Year Exam Question (2012) QAB4053 GEODYNAMICS AND BASIN DEVELOPMENT. [Past Year Examination Question]

Past Year Exam Question (2012) QAB4063 PETROLEUM GEOCHEMISTRY AND BASIN MODELING. [Past Year Examination Question]

Past Year Exam Question (2012) QAB4073 GEOMECHANICS AND FRACTURED RESERVOIR. [Past Year Examination Question]

Past Year Exam Question (2012) QAB4083 SEISMIC DATA PROCESSING. [Past Year Examination Question]

Past Year Exam Question (2012) QAB4093 VOLUME INTERPRETATION AND VISUALISATION. [Past Year Examination Question]

Past Year Exam Question (2012) QAB4103 NON SEISMIC METHOD. [Past Year Examination Question]

This list was generated on Fri Nov 22 16:54:52 2024 +08.