Items where Department / MOR is "Mechanical" and Year is 2022

A. Rashid, Muhammad Hamizan (2022) Enhancement Evaluation of Experimental Solar Chimney by Extended Solar Heat Trap. [Final Year Project] (Submitted)

ALI, IMTIAZ (2022) EXPERIMENTAL INVESTIGATION ON IMPROVEMENT OF MECHANICAL PROPERTIES OF DP590 STEEL JOINT USING DOUBLE PULSE RESISTANCE SPOT WELDING. Doctoral thesis, Universiti Teknologi PETRONAS.

Abdul Rahman, Nur Aimy Aqilah (2022) Simulation of Lazy Steel Wave Riser Bend Radius – New Configuration of Shaped Steel Lazy Wave Riser (SLWR). [Final Year Project] (Submitted)

Abdul Razak, Hafizhun Husna (2022) Development of Reliability, Availability and Maintainability (RAM) Model for Solar PV System. [Final Year Project] (Submitted)

Ahmad Asri, Nur Alya Qistina (2022) Effect of Hybrid Composition and Volume Fraction on Microstructure and Micro-hardness of Aluminum Titanium Carbide (Al/TiC) via Friction Stir Processing. [Final Year Project] (Submitted)

Ahmad Soalahuddin Al-Thani, Adam Iman (2022) Effect of Types of Rubber on Thermal Properties of Magnetoactive Material. [Final Year Project] (Submitted)

Asrul Hakim, Amira Nurhaliza (2022) Study On the Types of Petroleum-based Oil and Its Impact on Tensile Properties of MRE composite. [Final Year Project] (Submitted)

Azman, Muhammad Afif (2022) The Effects of Particle Size Of Zirconia-Alumina Powders On The Mechanical Properties of Thermal Barrier Coating Developed by High Velocity Oxy Fuel. [Final Year Project] (Submitted)

Azme, Amirul Farhan (2022) Study On the Influence of Particle Content on Tensile Properties of Smart Rubber Composite. [Final Year Project] (Submitted)

Azmi, Maziah (2022) Estimating Generalized Renewal Process (GRP) Model Parameters for Repairable Systems using Monte Carlo Approach. [Final Year Project] (Submitted)

DHARMANANDA, ROSHEN (2022) Open Hole Compression Performance of 3D Fiber Reinforced Composites. [Final Year Project] (Submitted)

Declan Lim, Hong Chwen (2022) Numerical Modelling of Cooling System for Battery Electric Vehicle Charging Station. [Final Year Project] (Submitted)

George, Jeffy Cherian (2022) Study of mechanical and thermal properties of MXene - PVDF hybrid composite film for automotive industry. [Final Year Project] (Submitted)

HOCK KING, PAUL TING (2022) The Criticality of Warming up and Idling of Vehicle in Relation to Environment. [Final Year Project] (Submitted)

Hadhri, Hazwan Haziq (2022) Effects Of Amplitudes of External Excitation On Overall Vibration Response of a Piping System. [Final Year Project] (Submitted)

Hamdan, Muhammad Fadhli (2022) Studying the Effect of Natural Convection Heat Flow in Compound Parabolic Concentrators (CPC). [Final Year Project] (Submitted)

Hazri, Muhammad Harris Izuan (2022) An investigation on thermal performance of bio-based filler. [Final Year Project] (Submitted)

Iha @ Ajen, Aileen Julie (2022) Investigation on Fluid Structure Interaction of Composite Piping Conveying Fluid. [Final Year Project] (Submitted)

Jothiahnantham, Dnesh (2022) Effect Of Hybridization Of Natural And Synthetic Fibers On Tensile Properties Of Composites: A Numerical Study. [Final Year Project] (Submitted)

Junaidy, Idlan Akmal (2022) Study of Twisted MXENE/PVDF Nanofiber Yarn. [Final Year Project] (Submitted)

Kathiravan, Dinish Mutu (2022) Numerical Simulation Of Temperature Distribution During Friction Stir Processing (AA7075). [Final Year Project] (Submitted)

Mat Rodzi, Mohamad Syafik (2022) Force Extraction Analysis of an Ocean Kinetic Energy Converter. [Final Year Project] (Submitted)

Mazlan, Nur Diniey Nadhirah (2022) Development of Excel-Based RBI Model for Stress Corrosion Cracking. [Final Year Project] (Submitted)

Mohamad Ali, Ikhwan Hakim (2022) Characteristics of Dust Accumulation and Influence on PV Panel’s Efficiency. [Final Year Project] (Submitted)

Mohamad Kamal, Siti Aisyaitun Fairuz (2022) Thermodynamic Analysis of Municipal Solid Waste Plasma Gasification Using Different Gasification Agents. [Final Year Project] (Submitted)

Mohd Amran, Ahmad Firdaus (2022) Establishing Maintenance Planning for Solar Power Plant based on RAM Study. [Final Year Project] (Submitted)

Mohd Amran, Muhammad Amirul Akid (2022) Mechanical Performance of Fibre Reinforced Lattice Structures under quasi-static axial compressive loads. [Final Year Project] (Submitted)

Mohd Asri, Nur Aqillah (2022) Artificial Neural Network of Flow Boiling Heat Transfer in Straight Pipe with Metal Foam. [Final Year Project] (Submitted)

Mohd Bahrin, Nurinfaqihah (2022) Using Reliability Growth Model to Predict New Covid-19 Cases in Malaysia. [Final Year Project] (Submitted)

Mohd Ridzuan, Muhammad Farhan Syauqi (2022) Effect of Turbulence Flow and Initial Particle Concentration on Jamming Probability through Coupled CFD-DEM Simulation. [Final Year Project] (Submitted)

Mohd Rosdi, Muhammad Muizzuddin (2022) Simulation For Embedding Conformal Heating Channel In Oil & Gas Angle Valve Using Additive Manufacturing Technology. [Final Year Project] (Submitted)

Muhammad Syahrul Goh, Muhammad Syafiq (2022) Thermophysical Behavior of the Hybrid Nanoparticles Reinforced Water-Based Drilling Fluid. [Final Year Project] (Submitted)

Nordin, Muhammad Nur Azib (2022) Heat Transfer Enhancement of Thermoelectric Generator with Corrugated Surface Structure Using MWCNT Nanofluid. [Final Year Project] (Submitted)

PAST YEAR QUESTION (2022) CEB2023 - CHEMICAL ENGINEERING THERMODYNAMICS II. [Past Year Examination Question]

Patapal Naidu, Daanesh Naidu (2022) Modelling and Analysis of Solar Hybrid Fuel Cell Propulsion System for Autonomous Unmanned Surface Vessel. [Final Year Project] (Submitted)

Premchand, Saswen (2022) The effect of plunge depth on the fabrication of base and mono composites of AZ91 Using friction stir processing. [Final Year Project] (Submitted)

R Selvaraja, Skandha Kumar (2022) The Corrosion Behaviour of Glass Fibre Reinforced Polymer Strengthened Steel Under High Temperature Environment. [Final Year Project] (Submitted)

Razali, Muhamad Faezi (2022) Theoretical Investigation on The Shallow Ground Thermal Profiling Under Dry and Wet Weather Conditions. [Final Year Project] (Submitted)

Richard, Grace (2022) Study of Indoor Air Quality at Hostel Rooms in the Presence of Natural Ventilation. [Final Year Project] (Submitted)

Richard, Grace (2022) Study of Indoor Air Quality at Hostel Rooms in the Presence of Natural Ventilation. [Final Year Project] (Submitted)

Saad, Muhammad Syauqie (2022) Steam Properties Prediction in Steam Pipeline System using Microsoft EXCEL VBA. [Final Year Project] (Submitted)

Sahari, Nurul Syahirah (2022) Finite Element Analysis of Belleville Spring Stiffness Behaviour. [Final Year Project] (Submitted)

Sanjay, Singh Sandhu (2022) Measurement of the water absorption on hybrid fibre waste composite and its impact on flexural performance. [Final Year Project] (Submitted)

Seong, Liew Chee (2022) Axial Hydro Turbine Blade Position Configuration for Optimum Hydropower Generation. [Final Year Project] (Submitted)

Settan, Jayashellan Vishnu (2022) Thermal Modelling and Analysis of Lithium Iron Phosphate Battery Pack in Small Electric Vehicles. [Final Year Project] (Submitted)

Shahrul Azran Huzzeini, Shahryl Solehi Huzzeini (2022) Investigation On The Effect Of Process Parameters On Temperature Profiles Of Friction Stir Processed AA7075/SiC Composites. [Final Year Project] (Submitted)

Suhazeli, Abdul Munir (2022) Analysis On The Performance Of Vibration Energy Harvester. [Final Year Project] (Submitted)

Tengku, Hillary (2022) Residual Strength Estimation of Medium Toughness Pipe Elbows with Longitudinally Aligned Interacting Corrosion Defects Subjected to Internal Pressure. [Final Year Project] (Submitted)

Varatharajoo, Hashmentd Rajah (2022) Modelling And Simulation of A Series-Parallel Hybrid Propulsion System For A Fixed Wing Quadcopter. [Final Year Project] (Submitted)

Vijaya Kumar, Sathia Devi (2022) Residual Strength Prediction of Medium Toughness Pipe Elbow with Circumferentially Aligned Interacting Corrosion Defects Subjected to Internal Pressure. [Final Year Project] (Submitted)

Wong, Chen Hau (2022) Simulation of Data Centre Cooling using Altaire. [Final Year Project] (Submitted)

Zamri, Muhammad Syakir (2022) Evaluation of Salt Contaminations on Rust Stabilizing Formation. [Final Year Project] (Submitted)

Zulkefli, Muhammad Aiman (2022) Evaluation and Testing of Exoskeleton to Assist in Pineapple Harvesting. [Final Year Project] (Submitted)

Zulkhafle, Zulaikha Hanis (2022) Mechanical Properties of Proppants Coated with Hybrid Nanostructure for Effective Hydraulic Fracturing. [Final Year Project] (Submitted)

Zulkifli, Mohammad Zulkhairi (2022) EDEM Simulation of Particles Path in a Vertical Cyclone Separator. [Final Year Project] (Submitted)