Items where Department / MOR is "Mechanical" and Year is 2024

Chow Jet (2024) Mechanical and thermal characterizations of electrospun nanoyarn developed through nanomanufacturing technique. [Final Year Project] (Submitted)

ABD DZUBIR, FAIZUL AZLY (2024) STRESS ANALYSIS OF NON-STANDARD Y-TEE PIPE FITTINGS FOR THE DESIGN CONFORMANCE WITH STRESS CLASSIFICATION APPROACH. Masters thesis, Universiti Teknologi PETRONAS.

AL-SHAIBANI, NAJIB MOHAMMED SULTAN (2024) In-Situ Analysis of Thermal Expansion and Defect-Induced Magnetism in Transition-Metals Doped Cubic Silicon Carbide lattice for Spintronics. Doctoral thesis, Universiti Teknologi PETRONAS.

Abang Esmiera, Abang Irfaan (2024) Plasma treatment for lattice defect repair of laser-induced graphene. [Final Year Project] (Submitted)

Abd Rahman, Muhammad Haikal (2024) Lithium battery thermal management performances using a liquid cooling system. [Final Year Project] (Submitted)

Abdul Nasir, Wan Amir Afiq (2024) Development of solar photovoltaic energy-storage system for a photo-electro-chemical (PEC) hydrogen production. [Final Year Project] (Submitted)

Abdul Rahman, Amir Thaqif (2024) Pipe dented detection using acoustic emission. [Final Year Project] (Submitted)

Aedy Aeraunty, Nor Azlina (2024) Numerical Investigation of The Freshwater Production Performance and Rate of Evaporation for The Solar Desalination Process using MXene with Phase Change Material. [Final Year Project] (Submitted)

Ahmad Fauzi, Muhamad Nor Adlan (2024) Compression behaviour and energy absorption of foam-filled 3D-printed honeycomb sandwich composite structures. [Final Year Project] (Submitted)

Ahmad Shafudean, Nur Alyaa Safiya (2024) Corrosion study of the coated metal exposed to H2S environment. [Final Year Project] (Submitted)

Ahmad Shahabuddin, Ahmad irfan (2024) Enhancing Sand Screen Design: Unraveling Sand-Screen Interactions for Improved Flow and Sand Production Control. [Final Year Project] (Submitted)

Ali Ameen Roshan Ali, Ali Ameen (2024) Development of Porosity Evaluation of Inservice Thermal Barrier Coated Ceramics Using X-Band Microwave Nondestructive Technique. Masters thesis, Universiti Teknologi PETRONAS.

Aminuddin, Amirul Basyiruddin (2024) Reliability prediction of Pipelines Exposed to Flow Induced Vibration. [Final Year Project] (Submitted)

Aminuddin, Muhammad Faiq Afif (2024) Effect of 2D Nanocarbon-Based Nanofluid Coating for Effective Scale Inhibitor Management in Oil & Gas Production. [Final Year Project] (Submitted)

Anuar, Muhammad Afiq (2024) Simulation of control of vibrations of piping system through usage of tuned mass damper system. [Final Year Project] (Submitted)

Arichandrn, Sarrvesh (2024) The effect of viscosities and densities in multiphase flow in pipe. [Final Year Project] (Submitted)

Azlan, Aina Zafirah (2024) Effect of Volatile Corrosion Inhibitor on the Condensation and Corrosion Rates of Top-of-Line Corrosion in carbon steel. [Final Year Project] (Submitted)

Azman, Aiman Syafiq (2024) Design Optimization of High Torque Low Speed Radial Flux Permanent Magnet In-Wheel Motor for Agriculture Trolley. [Final Year Project] (Submitted)

Azman, Muhammad Aiman (2024) Innovative Plasma-Exposed Materials for Advancing Fusion Reactor Performance. [Final Year Project] (Submitted)

Bakar Shah, Muhammad Dennis (2024) Conductive Polymer Based Nanocomposites Coated Electrode for H2 Production. [Final Year Project] (Submitted)

Bakri, Muhammad Aliff ZIkri (2024) Reliability, availability and maintainability (RAM) modeling with discrete event simulation method. [Final Year Project] (Submitted)

Cheah, Cheng Hooi (2024) Study of the Effect of Dust on Housing's Indoor Air Quality in Industrial Area. [Final Year Project] (Submitted)

Cheong, Ian Yue Qian (2024) Investigation of Hydrogen PEM Fuel Cell Performance with Temperature Variation. [Final Year Project] (Submitted)

Daniel, Dzedryan (2024) Corrosion study of REE. [Final Year Project] (Submitted)

Fazli, Farashah Farizal (2024) Performance Evaluation of Tensile, Flexural and Porosity Properties of Kenaf Core and Quarry Dust in Cement Brick. [Final Year Project] (Submitted)

Fitri, Muhammad Aiman Syazani (2024) Physical and mechanical properties changes during solid state sintering of W – Ti composition. [Final Year Project] (Submitted)

G.Balan, Prusothman (2024) Investigation of angle orientation effect in two-phase flow in pipe. [Final Year Project] (Submitted)

Goay, Wen Khan (2024) Coupling Photovoltaic-Thermal Systems with Heat Pipes and Thermoelectric Generation for Enhanced Heat Management and Energy Efficiency. [Final Year Project] (Submitted)

HUSSNAIN, SYED MUHAMMAD (2024) CHARACTERIZATION AND DAMAGE MODELLING OF HYGROTHERMALLY AGED RESIN-INFUSED THERMOPLASTIC E-GLASS FIBRE-REINFORCED COMPOSITES. Masters thesis, Universiti Teknologi PETRONAS.

Hamdan, Muhammad (2024) Heat Map Recognition with ML in for Different Flow Regime. [Final Year Project] (Submitted)

Hasnol, Muhammad Hazim Nukman (2024) Effect of indenter geometry on the energy absorption of foam-filled honeycomb sandwich composite structures. [Final Year Project] (Submitted)

Hazri, Muhammad Eiman (2024) Testing, design and fabrication of test rig for vortex gravitational hydroelectric system and parameters study the related parameters. [Final Year Project] (Submitted)

Hong, Yao Cong Ivan (2024) Numerical Investigation of Geometric SCFs in Internally Ring-Stiffened Tubular X-Joints of Offshore Structures. [Final Year Project] (Submitted)

ISMAIL, ASMAWI (2024) PROPERTIES OF DIFFUSION BONDED AW50 ALUMINIUM ALLOY TO A36 STEEL USING GALLIUM AS AN INTERLAYER. Doctoral thesis, Universiti Teknologi PETRONAS.

Jeevan, Natasha Voznyuk (2024) CFD modelling to predict fire escalation and propagation between fuel storage tanks in petroleum plants. [Final Year Project] (Submitted)

Johari, Muhammad Amirun Tasnim (2024) Desulphurization of waste tyre pyrolysis oil and its effect towards diesel engine fuel delivery metal degradation. [Final Year Project] (Submitted)

Krishnamorthy, Sugenesh Asari (2024) EXPERIMENTAL STUDY ON MEASUREMENT OF CORROSION RATE ON GALVANIZED CARBON STEEL WHEN EXPOSED TO SOIL AND SALT WATER IN VARIOUS TEMPERATURE AND TIME DURATION. [Final Year Project] (Submitted)

Kunasekaram, Kavinesh (2024) Hybrid Nanoparticles Reinforced Cooling Fluid for Effective Thermal Management in Electric Vehicle Battery. [Final Year Project] (Submitted)

LIEW, YOONG WEI (2024) Numerical Analysis of The Thermal Storage Density and Specific Heat Capacity of a Thermal Energy Storage Using Ionic Liquid-based Nanofluid. [Final Year Project] (Submitted)

Lee, Mohammad Ezlii Erzuan (2024) Performance Analysis of Thermal management system of Electrical Vehicle Battery using Heat Pipe. [Final Year Project] (Submitted)

Lee, Yong Hong (2024) Photovoltaic Panel Integrated with Solar Tracker and Fins as Passive Cooling System. [Final Year Project] (Submitted)

Leslie Ramsay, Mary Ilyona Anak (2024) FEM Analysis of PDC Drill Bit Cutter Efficiency Designed for Interbedded Formation Drilling. [Final Year Project] (Submitted)

Ling, Kelvin Zhong Xian (2024) Development of Tungsten-Copper Alloy for Improved Thermal Performance at High Temperature Applications. [Final Year Project] (Submitted)

Loganathan, Narasimhaa Naidu A/L (2024) Synthesis and Characterization of Laser Scribed Graphene from Oil Palm Lignin for High-Performance Supercapacitors. Masters thesis, Universiti Teknologi PETRONAS.

MD HANAFIAH, NUR HAFZAREEN (2024) OPTIMIZING PROCESSING PARAMETER MODIFICATIONS IN VACUUM BAGGING PREFORMING FOR OVEN CURING OF COMPOSITE LAMINATES. Doctoral thesis, Universiti Teknologi PETRONAS.

MUKHLISA, SYIFA (2024) CO2 Sequestration in coal seams - Rocks adsorption properties study. [Final Year Project] (Submitted)

Mohamad Farid, Amirul Firdaus (2024) Simulation of a liquid-cooling system for the battery thermal management. [Final Year Project] (Submitted)

Mohamad Zahir, Muhammad Amirrul Nurrazzi (2024) Virtual Reality Model for Pipeline Isolation Plug. [Final Year Project] (Submitted)

Mohamed Muzamil, Muhammad Shalihin (2024) Corrosion mechanism of copper exposed to sulphide environment containing dissolved CO2 and N2 gaseous. [Final Year Project] (Submitted)

Mohammad Mokhtar, Muhammad Fawwaz Ezzat (2024) Turbine performance and efficiency for vortex gravitational hydro electric. [Final Year Project] (Submitted)

Mohammed, Sulafa Abdamageed Saadaldeen (2024) Investigation On The Role Of Triazolium And Imidazolium-Based Ionic Liquids As Potential Electrolyte For CO2 Electrochemical Reduction. Doctoral thesis, Universiti Teknologi PETRONAS.

Mohd Ali, Muhammad Izzat (2024) Reliability, Availability and Maintainability (RAM) Study on Offshore Crane. [Final Year Project] (Submitted)

Mohd Fakharurazi, Aiman Aqmal (2024) Study of Flame Hydrogen at Ambient Pressure. [Final Year Project] (Submitted)

Mohd Fikri, Muhammad Afif Mustaqim (2024) Performance efficiency of vortex gravitational hydroelectric casing shape. [Final Year Project] (Submitted)

Mohd Hanif, Muhammad Zharif Mifdhal (2024) CFD modelling of heat sinks thermal boundary layer effect on cooling of electronic components. [Final Year Project] (Submitted)

Mohd Nasaruddin, Arif Hafizuddin (2024) Nanoyarn Developemnet using Nanomanufacturing. [Final Year Project] (Submitted)

Mohd Rizal, Muhammad Iirffan (2024) Exploring Strategies to Promote Electric Vehicle Adoption in Malaysia. [Final Year Project] (Submitted)

Mohd Roslan, Muhammaf Firdaus (2024) Investigation of mechanical field weakening for radial flux permanent magnet motor for retrofit marine hybrid electric propulsion system. [Final Year Project] (Submitted)

Mohd Sabien, Nur Ain Shafizah (2024) Performance Investigation of Solar-Wind Hybrid System for Small-Scale Pond Aeration. [Final Year Project] (Submitted)

Mohd Shaibi, Ahmad Bakhtiar (2024) Optimizing the Techno-Economic Performance of Photovoltaic Systems for Hydrogen Production and Electric Vehicle Charging Stations: A Comparative Analysis Under Three States in East Malaysia. [Final Year Project] (Submitted)

Mohd Zaki, Hazirah Husna (2024) Development of cantilever beam fibre Bragg grating (FBG) based geophone with temperature compensation. [Final Year Project] (Submitted)

Mohmad Azman, Muhammad Amir Fitri (2024) Performance Evaluation of Compressive Strength, Density and Water Absorption Properties of Kenaf Core and Recycled Concrete in Cement Brick. [Final Year Project] (Submitted)

Moo, Su Min (2024) Investigation of using contactless vision-based method for vibration monitoring. [Final Year Project] (Submitted)

Muhamad Nasir, Muhammad Haniff (2024) Biodiesel synthesis from Soldier Larvae Lipid as palm-oil wastes reuse and reduce measures. [Final Year Project] (Submitted)

Mustafa, Muhammad Zhafir Waqiyuddin (2024) Reliability prediction of pipelines subjected to Naphthenic Acid Corrosion. [Final Year Project] (Submitted)

Najihah, Izzatie (2024) Failure Pressure Prediction of an API 5L X120 Pipe Elbow with Circumferentially Aligned Interacting Corrosion Defects Subjected to Internal Pressure. [Final Year Project] (Submitted)

Nerat, Amanda Jane (2024) Investigating the effect of bioethanol towards fuel delivery metal corrosion and elastomer degradation. [Final Year Project] (Submitted)

Nesan, Kartikeyan Patma (2024) Factors Influencing Machinery Safety and A Holistic Team Approach Preventive Plan In A Power Plant. Doctoral thesis, Universiti Teknologi PETRONAS.

Ong, Kai Je (2024) The effects of spray distance on the mechanical properties of Thermal Barrier Coating on 316 SSL developed by thermal flame spray. [Final Year Project] (Submitted)

Ooi, Wei Di (2024) Double-Passed Solar Air Collector with Metal Foam Matrix Integrated Storage System. [Final Year Project] (Submitted)

Osman, Muhammad Iskandar Najmi (2024) Desulphurization of waste tyre pyrolysis oil and its effect towards diesel engine fuel delivery elastomer degradation. [Final Year Project] (Submitted)

Peter, Karen Cherembang Anak (2024) CFD Analysis of PDC Drill Bit Designed for Interbedded Formation Drilling. [Final Year Project] (Submitted)

RASUL, ADNAN (2024) OPTIMIZATION OF INTERNAL RING AND STRUCTURAL JOINT PARAMETERS FOR FATIGUE LIFE AND STRENGTH ENHANCEMENT OF KT-JOINT. Masters thesis, Universiti Teknologi PETRONAS.

Rasangika, Ambagaha Hewage Dona Kalpani (2024) Experimental and numerical investigation on vibration-assisted heat transfer of heat sinks under sinusoidal and square wave shapes. Doctoral thesis, Universiti Teknologi PETRONAS.

S.M.Manogaran, Sashithaaran (2024) Visualization of Mixing of Different Liquids for Assessment of Mixing Efficiency. [Final Year Project] (Submitted)

SOOMRO, AFZAL AHMED (2024) ANALYSIS OF SMOTE-BASED DATA AUGMENTATION AND MACHINE LEARNING MODELS FOR BURST PRESSURE PREDICTION OF OIL AND GAS PIPELINES. Doctoral thesis, Universiti Teknologi PETRONAS.

Saadon, Syazmi Zul Arif Hakimi Bin (2024) Pretreatments of Napier Grass for Lignin Extraction Via Cellulolytic Enzymatic Method. Masters thesis, Universiti Teknologi PETRONAS.

Saboor, Abdul (2024) Resource Provisioning and Scheduling of Microservices for Green Secure Cloud Computing Environment. Masters thesis, Universiti Teknologi PETRONAS.

Sahat, Mohd Nurhadi (2024) The synthesis of epoxy coating reinforced with graphene oxide/mesoporous silica as coating for corrosion protection of steel structure. [Final Year Project] (Submitted)

Samuel, D'Wayne Jefferson (2024) Hybrid Photovoltaic Thermal Solar Collector with Integrated Thermoelectric Generators and Metal Heat Sink Fins. [Final Year Project] (Submitted)

Sapian, Muhammad Salman Hakim (2024) Effect of moisture absorption of polymer composite. [Final Year Project] (Submitted)

Shaharzat, Muhammad Kamil (2024) Performance Evaluation of Tensile, Flexural and Porosity Properties of Kenaf Core and Recycled Concrete in Cement Brick. [Final Year Project] (Submitted)

Shaifuddin, Muhd Abdul Rahim (2024) Water repellency, permeability and wettability of thermal insulation materials for pipeline. [Final Year Project] (Submitted)

Shane, Christian Caleb Anak (2024) Evaluate the Hydrogen Diffusivity in Transmuted Plasma-Facing Materials. [Final Year Project] (Submitted)

Shariffuddin, Muhammad Nabil Fahmy (2024) Performance Evaluation of Compressive Strength, Density and Water Absorption Properties of Kenaf Core and Quarry Dust in Cement Brick. [Final Year Project] (Submitted)

Sharwar, Mohamed Raza Saquib (2024) Computational Modeling of Lithium-Ion Battery Packs with Varied Cell Spacing for Optimal Thermal Management Using Forced Air Cooling. [Final Year Project] (Submitted)

Sibol Hamid, Muhammad Nabil Aiman (2024) Study the wireless sensor based data transfer from filed to the base unit and its effect on data loss. [Final Year Project] (Submitted)

Singh, Harpreet (2024) Reliability prediction of Pipeline Isolation Plug. [Final Year Project] (Submitted)

Solahudin, Syaqir Aiman (2024) Structural Analysis of Deepwater Shaped Steel Lazy Wave Riser. [Final Year Project] (Submitted)

Suhazahari, Hazim Thaqif (2024) Design of test rig for static structural testing of offshore tubular joints. [Final Year Project] (Submitted)

Sumantere, Shahira Naziha (2024) Corrosion study of the effect different layer of coated metal in H2S environment. [Final Year Project] (Submitted)

Sundarajan, Thaneswaran (2024) Material Selection for Fusion Reactor Blanket Layer Components. [Final Year Project] (Submitted)

Syarizal, Shah Hayziem (2024) CFD modelling and investigation on the utilization of Phase Change Material (PCM) in building’s cooling system. [Final Year Project] (Submitted)

Syed Mohd Husainy, Sharifah Hannah (2024) Experimental and Molecular study of Uncaria Gambir Extract as a green inhibitor for steel. [Final Year Project] (Submitted)

Tamilarasu, Sangiitha (2024) Study on the Effects of Flow Baffles on the Heat Transfer in a Cold Water Reservoir. [Final Year Project] (Submitted)

Tan, Derek Weng Hin (2024) Performance and emission investigation of a compression ignition engine powered with palm waste biodiesel. [Final Year Project] (Submitted)

Tan, Gabriel Xiao Ke (2024) Synthesis and Characterization of Zinc Oxide Nanoparticles for Enhanced LED Packaging. [Final Year Project] (Submitted)

Tan, Li Lun (2024) Effect of Hybrid Fillers on the Flexural Performance of 3D Fibre-Reinforced Composites. [Final Year Project] (Submitted)

Tham, Jian Yang (2024) Effect of Title Angle on Soiled Solar PV Panels in Malaysia. [Final Year Project] (Submitted)

Wong, Chen Chee (2024) Analyzing the performance of melamine (P-C-N) system with layered hydroxides additives. [Final Year Project] (Submitted)

Wong, Roger Yi Qin (2024) Fault diagnosis of PV plant using digital twin technology. [Final Year Project] (Submitted)

Yap, Yi Xian (2024) Corrosion Behavior Study of CFRP Strengthened Steel with Different Oxide Layer Thickness under High Temperature. [Final Year Project] (Submitted)

Yusoff, Mohamad Azfar (2024) Modelling and Simulation of a Diesel-Electric Hybrid Ship Propulsion System. [Final Year Project] (Submitted)

Yusri, Muhammad Ali Syaharzuhdi (2024) Degradation of composite in hydrogen environment. [Final Year Project] (Submitted)

Zaimi, Qamariah (2024) Modelling and Analysis of Active Electric Power Steering of EV Passenger Cars for Enhanced Performance. [Final Year Project] (Submitted)

Zainal Abidin, Adam Harith (2024) Development of diaphragm-based fibre Bragg grating (FBG) geophone for seismic acquisition. [Final Year Project] (Submitted)

Zainol, Najmuddin Mifdhal (2024) Photovoltaic Thermal Solar Collector with PCM Embedded Porous Media Absorber. [Final Year Project] (Submitted)

Zainuddin, Hafiz Hazmirul (2024) Development Of Materials Informatics: The Materials “Gene” For Alloy In Charge in Nuclear Fusion Reactor. [Final Year Project] (Submitted)

Zainul Hisyam, Abdul Hanan (2024) Simulated Tank Leaking Detecting Using Acoustic Emission (Ae) Technology For Inspection And Monitoring Of Tank In Process Industry. [Final Year Project] (Submitted)

Zamri, Harith (2024) CFD Analysis of PDC Drill Bit Nozzle Efficiency Designed for Interbedded Formation Drilling. [Final Year Project] (Submitted)

Zamri, Muhammad Irfan (2024) Optimization of Penetration Rate for “Polycrystalline Diamond Compact Drill Bit” using Discrete Element Modelling. [Final Year Project] (Submitted)

Zuhri, Adib Haqqi (2024) Pipe dented identification using fiber bragg grating sensor. [Final Year Project] (Submitted)

Zuraini, Nur Fathiah Husna (2024) Exploring Pore Shape Effects in Metal Foam Filters: Implications for Flow Rate and Sand Production Control. [Final Year Project] (Submitted)

alkhalil, Mustafa (2024) The Influence of Entry Length and Flow Development Regime in CFD. [Final Year Project] (Submitted)

binti Md Yuha, Yasmine (2024) An Investigation of Ionic Liquids and Quaternary Ammonium Salts as Drilling Mud Additives for Gas Hydrate Sediments. Masters thesis, Universiti Teknologi PETRONAS.

muhamad hadriq affandie, muhammad haikal hakimi (2024) Effect of moisture absorption on mechanical performance of polymer composite. [Final Year Project] (Submitted)