Items where Department / MOR is "Mechanical" and Year is 2024

,

Chow Jet (2024) Study of Shape Memory Properties Nanoyarn Developed Through Electrospinning Technique. [Final Year Project] (Submitted)

A

ABD DZUBIR, FAIZUL AZLY (2024) STRESS ANALYSIS OF NON-STANDARD Y-TEE PIPE FITTINGS FOR THE DESIGN CONFORMANCE WITH STRESS CLASSIFICATION APPROACH. Masters thesis, Universiti Teknologi PETRONAS.

AL-SHAIBANI, NAJIB MOHAMMED SULTAN (2024) In-Situ Analysis of Thermal Expansion and Defect-Induced Magnetism in Transition-Metals Doped Cubic Silicon Carbide lattice for Spintronics. Doctoral thesis, Universiti Teknologi PETRONAS.

Abang Esmiera, Abang Irfaan (2024) Exploring the Potential of Nanocomposite/Graphene Hybrid Supercapacitors for Sustainable Energy Storage Applications. [Final Year Project] (Submitted)

Abd Rahman, Muhammad Haikal (2024) Comparative Analysis of Thermal Management Systems for Electric Vehicle Batteries: Phase Change Material vs. Heat Pipe, Using MATLAB Simulations. [Final Year Project] (Submitted)

Abdul Karim, Malik (2024) Fabrication and Performance Evaluation of Braid-Reinforced Thermoplastic Pipe for Oil and Gas. Masters thesis, UNIVERSITI TEKNOLOGI PETRONAS.

Abdul Nasir, Wan Amir Afiq (2024) Development of Solar Photovoltaic Continuous Energy Systems for Photoelectrochemical Hydrogen Production. [Final Year Project] (Submitted)

Abdul Rahman, Amir Thaqif (2024) Acoustic Emission Monitoring for Pipeline Integrity: An Investigation of Dent Detection Technique. [Final Year Project] (Submitted)

Aedy Aeraunty, Nor Azlina (2024) Numerical Investigation of Evaporation Rate for Nanocomposite based Solar Desalination. [Final Year Project] (Submitted)

Ahmad Fauzi, Muhamad Nor Adlan (2024) Compression Behaviour and Energy Absorption of Fibre-Reinforced 3D-Printed Honeycomb Sandwich Composite Structures. [Final Year Project] (Submitted)

Ahmad Shafudean, Nur Alyaa Safiya (2024) Corrosion Study of Coated Carbon Steel Exposed to H2S Environment. [Final Year Project] (Submitted)

Ahmad Shahabuddin, Ahmad irfan (2024) Simulation of Pre-pack Test on Metal Mesh Screen with Dutch Twilled Weave (MMSDTW) and Wire Wrap Screen (WWS) using CFD-DEM. [Final Year Project] (Submitted)

Ali, Saad (2024) Investigation on the Influence of Noble Metal Decorated Graphene Nanoplatelets Reinforced Copper Nano Composite for Improved Thermal Properties. Doctoral thesis, UNIVERSITI TEKNOLOGI PETRONAS.

Ali Ameen Roshan Ali, Ali Ameen (2024) Development of Porosity Evaluation of Inservice Thermal Barrier Coated Ceramics Using X-Band Microwave Nondestructive Technique. Masters thesis, Universiti Teknologi PETRONAS.

Ali Shar, Mukhtiar (2024) Energy Performance Based Fault Detection and Prediction of Centrifugal Gas Compressor using Hybrid Machine Learning Model. Doctoral thesis, UNIVERSITI TEKNOLOGI PETRONAS.

Aminuddin, Amirul Basyiruddin (2024) Reliability prediction of Pipelines Exposed to Flow Induced Vibration. [Final Year Project] (Submitted)

Aminuddin, Muhammad Faiq Afif (2024) Effect of 2D Nanocarbon-Based Nanofluid Coating for Effective Scale Inhibitor Management in Oil & Gas Production. [Final Year Project] (Submitted)

Anuar, Muhammad Afiq (2024) Simulation of vibration control on piping system through usage of Tuned Mass Damper (TMD). [Final Year Project] (Submitted)

Arichandrn, Sarrvesh (2024) The Effect of Viscosities and Densities on Characteristic of Slug Flow Regime. [Final Year Project] (Submitted)

Azlan, Aina Zafirah (2024) Effect of Volatile Corrosion Inhibitor on the Condensation and Corrosion Rates of Top-of-Line Corrosion in carbon steel. [Final Year Project] (Submitted)

Azman, Aiman Syafiq (2024) Design Optimization of High Torque Low Speed Radial Flux Permanent Magnet In-Wheel Motor for Agriculture Trolley. [Final Year Project] (Submitted)

Azman, Muhammad Aiman (2024) Innovative Plasma-Exposed Materials for Advancing Fusion Reactor Performance. [Final Year Project] (Submitted)

alkhalil, Mustafa (2024) Prediction of Development Length in Two Phase Slug and Annular Flow in Horizontal Pipe Using Computational Fluid Dynamics. [Final Year Project] (Submitted)

B

Bakar Shah, Muhammad Dennis (2024) Conductive Polymer Based Nanocomposites Coated Electrode for H2 Production. [Final Year Project] (Submitted)

Bakri, Muhammad Aliff ZIkri (2024) Reliability, Availability and Maintainability (RAM) modeling with Discrete Event Simulation method on Crude Distillation Unit (CDU). [Final Year Project] (Submitted)

binti Md Yuha, Yasmine (2024) An Investigation of Ionic Liquids and Quaternary Ammonium Salts as Drilling Mud Additives for Gas Hydrate Sediments. Masters thesis, Universiti Teknologi PETRONAS.

C

Cheah, Cheng Hooi (2024) Study of the Indoor and Outdoor Air Quality of Room in Perak. [Final Year Project] (Submitted)

Cheong, Ian Yue Qian (2024) Investigation of Hydrogen Fuel Cell Performance with Temperature Variation. [Final Year Project] (Submitted)

Chowdhury, Nasimul Eshan (2024) Development of Toxic Compound Reduced Lignin-Epoxy Coating Material for Carbon Steel in Mild H2S Corrosion. Masters thesis, UNIVERSITI TEKNOLOGI PETRONAS.

D

Daniel, Dzedryan (2024) Corrosion study of REE. [Final Year Project] (Submitted)

F

Fazli, Farashah Farizal (2024) Performance Evaluation of Tensile, Flexural and Porosity Properties of Kenaf Core and Quarry Dust in Cement Brick. [Final Year Project] (Submitted)

Fitri, Muhammad Aiman Syazani (2024) Physical and mechanical properties changes during solid state sintering of W – Ti composition. [Final Year Project] (Submitted)

G

G.Balan, Prusothman (2024) Relationship between the dynamic pressure and the force fluctuations in horizontal pipe using two-phase flow. [Final Year Project] (Submitted)

Goay, Wen Khan (2024) Coupling Photovoltaic-Thermal Systems with Heat Pipes and Thermoelectric Generation for Enhanced Heat Management and Energy Efficiency. [Final Year Project] (Submitted)

H

HUSSNAIN, SYED MUHAMMAD (2024) CHARACTERIZATION AND DAMAGE MODELLING OF HYGROTHERMALLY AGED RESIN-INFUSED THERMOPLASTIC E-GLASS FIBRE-REINFORCED COMPOSITES. Masters thesis, Universiti Teknologi PETRONAS.

Hamdan, Muhammad (2024) Heat Map Recognition with ML in for Different Flow Regime. [Final Year Project] (Submitted)

Hasnol, Muhammad Hazim Nukman (2024) Effect of indenter geometry on the energy absorption of foam-filled honeycomb sandwich composite structures. [Final Year Project] (Submitted)

Hazri, Muhammad Eiman (2024) CFD Development of Gravitational Vortex Hydroelectric Turbine (GVHT) System for Sewage Treatment Plant Discharge. [Final Year Project] (Submitted)

Hong, Yao Cong Ivan (2024) Numerical Investigation of Geometric SCFs in Internally Ring-Stiffened Tubular X-Joints of Offshore Structures. [Final Year Project] (Submitted)

I

ISMAIL, ASMAWI (2024) PROPERTIES OF DIFFUSION BONDED AW50 ALUMINIUM ALLOY TO A36 STEEL USING GALLIUM AS AN INTERLAYER. Doctoral thesis, Universiti Teknologi PETRONAS.

J

Jeevan, Natasha Voznyuk (2024) CFD Modelling to predict fire escalation and propagation of fire induced domino affecting time-to-failure and intervention due to speed and direction of wind between fuel storage tanks in petroleum plants. [Final Year Project] (Submitted)

Johari, Muhammad Amirun Tasnim (2024) Transesterification Of Black Soldier Fly Larvae and Its Effect Towards Diesel Engine Fuel Delivery Elastomer Degradation. [Final Year Project] (Submitted)

K

Krishnamorthy, Sugenesh Asari (2024) EXPERIMENTAL STUDY ON MEASUREMENT OF CORROSION RATE ON GALVANIZED CARBON STEEL WHEN EXPOSED TO SOIL AND SALT WATER IN VARIOUS TEMPERATURE AND TIME DURATION. [Final Year Project] (Submitted)

Kunasekaram, Kavinesh (2024) Hybrid Nanoparticles Reinforced Cooling Fluid for Effective Thermal Management in Electric Vehicle Battery. [Final Year Project] (Submitted)

L

LAU, ZHI HANG (2024) INSTRUMENT FAILURE SIGNATURES STUDY FOR ARTIFICIAL INTELLIGENCE MODEL INTEGRITY. [Final Year Project] (Submitted)

LIEW, YOONG WEI (2024) NUMERICAL ANALYSIS OF THERMAL CONDUCTIVITY IN THERMAL ENERGY STORAGE USING IONIC LIQUID-BASED NANOFLUIDS. [Final Year Project] (Submitted)

Lee, Mohammad Ezlii Erzuan (2024) Performance Analysis of Thermal management system of Electrical Vehicle Battery using Heat Pipe. [Final Year Project] (Submitted)

Lee, Yong Hong (2024) Photovoltaic Panel Integrated with Solar Tracker and Fins as Passive Cooling System. [Final Year Project] (Submitted)

Leslie Ramsay, Mary Ilyona Anak (2024) FEM Analysis of Variable Polycrystalline Diamond Compact (PDC) Drill Bit Cutter Sizes Designed for Drilling in Sandstone and Limestone Formation. [Final Year Project] (Submitted)

Ling, Kelvin Zhong Xian (2024) Development of Tungsten-Copper Alloy for Improved Mechanical & Physical Performance at High Temperature Applications. [Final Year Project] (Submitted)

Loganathan, Narasimhaa Naidu A/L (2024) Synthesis and Characterization of Laser Scribed Graphene from Oil Palm Lignin for High-Performance Supercapacitors. Masters thesis, Universiti Teknologi PETRONAS.

M

MD HANAFIAH, NUR HAFZAREEN (2024) OPTIMIZING PROCESSING PARAMETER MODIFICATIONS IN VACUUM BAGGING PREFORMING FOR OVEN CURING OF COMPOSITE LAMINATES. Doctoral thesis, Universiti Teknologi PETRONAS.

MUKHLISA, SYIFA (2024) CO2 Sequestration in coal seams - Rocks adsorption properties study. [Final Year Project] (Submitted)

Matran, Wail Mohammed (2024) Establishment of Sintering Mechanism of Ferromagnetic Ceramic Strontium Ferrite SrFe12O19 in Microwave Radiation Heating Environment. Masters thesis, UNIVERSITI TEKNOLOGI PETRONAS.

Mohamad Farid, Amirul Firdaus (2024) Simulation of A Liquid-cooling System for Electric Vehicle Battery Thermal Management System Using Nanofluid. [Final Year Project] (Submitted)

Mohamad Zahir, Muhammad Amirrul Nurrazzi (2024) Modelling and Virtual Reality Development for Pipeline Isolation Plug. [Final Year Project] (Submitted)

Mohamed Muzamil, Muhammad Shalihin (2024) Corrosion mechanism of copper exposed to sulphide environment containing dissolved CO2 and N2 gaseous. [Final Year Project] (Submitted)

Mohammad Mokhtar, Muhammad Fawwaz Ezzat (2024) Turbine performance and efficiency for vortex gravitational hydro electric. [Final Year Project] (Submitted)

Mohammed, Sulafa Abdamageed Saadaldeen (2024) Investigation On The Role Of Triazolium And Imidazolium-Based Ionic Liquids As Potential Electrolyte For CO2 Electrochemical Reduction. Doctoral thesis, Universiti Teknologi PETRONAS.

Mohd Ali, Muhammad Izzat (2024) Reliability, Availability and Maintainability (RAM) Study on Offshore Crane. [Final Year Project] (Submitted)

Mohd Fakharurazi, Aiman Aqmal (2024) Study of mechanical and thermal properties of electrospun nanofibrous thermoplastic poly(ε-caprolactone) (PCL) and thermoplastic polyurethane (TPU). [Final Year Project] (Submitted)

Mohd Fikri, Muhammad Afif Mustaqim (2024) Performance Efficiency of Gravitational Water Hydroelectric Vortex Casing Shape. [Final Year Project] (Submitted)

Mohd Hanif, Muhammad Zharif Mifdhal (2024) CFD modelling of heat sinks thermal boundary layer effect on cooling of electronic components. [Final Year Project] (Submitted)

Mohd Nasaruddin, Arif Hafizuddin (2024) Nanoyarn Developemnet using Nanomanufacturing. [Final Year Project] (Submitted)

Mohd Nor, Ahmad Kamal (2024) Failure Prediction of Double Shaft Gas Turbine using Uncertainty Aware Explainable AI. Doctoral thesis, UNIVERSITI TEKNOLOGI PETRONAS.

Mohd Rizal, Muhammad Iirffan (2024) Exploring Strategies to Promote Electric Vehicle Adoption in Malaysia. [Final Year Project] (Submitted)

Mohd Roslan, Muhammaf Firdaus (2024) Investigation of Mechanical Field Weakening for Radial Flux Permanent Magnet Motor for Retrofit Marine Hybrid Electric Propulsion System. [Final Year Project] (Submitted)

Mohd Sabien, Nur Ain Shafizah (2024) Performance Investigation of Solar-Wind Hybrid System for Small-Scale Pond Aeration. [Final Year Project] (Submitted)

Mohd Shaibi, Ahmad Bakhtiar (2024) Optimizing the Techno-Economic Performance of Photovoltaic Systems for Hydrogen Production and Electric Vehicle Charging Stations: A Comparative Analysis Under Three States in East Malaysia. [Final Year Project] (Submitted)

Mohd Zaki, Hazirah Husna (2024) Development of cantilever beam fibre Bragg grating (FBG) based geophone with temperature compensation. [Final Year Project] (Submitted)

Mohmad Azman, Muhammad Amir Fitri (2024) Performance Evaluation of Compressive Strength, Density and Water Absorption Properties of Kenaf Core and Recycled Concrete in Cement Brick. [Final Year Project] (Submitted)

Moo, Su Min (2024) Contactless Vision-Based Monitoring for Mechanically Induced Vibrations in Pipe. [Final Year Project] (Submitted)

Muhamad Nasir, Muhammad Haniff (2024) Biodiesel synthesis from Soldier Larvae Lipid as palm-oil wastes reuse and reduce measures. [Final Year Project] (Submitted)

Mustafa, Muhammad Zhafir Waqiyuddin (2024) Reliability prediction of pipelines subjected to Naphthenic Acid Corrosion. [Final Year Project] (Submitted)

muhamad hadriq affandie, muhammad haikal hakimi (2024) Effect of moisture absorption on mechanical performance of polymer composite. [Final Year Project] (Submitted)

N

Najihah, Izzatie (2024) i Failure Pressure Prediction of an API 5L X120 Pipe Elbow with Circumferentially Aligned Interacting Corrosion Defects Subjected to Internal Pressure. [Final Year Project] (Submitted)

Nerat, Amanda Jane (2024) Investigating the effect of bioethanol towards fuel delivery metal corrosion and elastomer degradation. [Final Year Project] (Submitted)

Nesan, Kartikeyan Patma (2024) Factors Influencing Machinery Safety and A Holistic Team Approach Preventive Plan In A Power Plant. Doctoral thesis, Universiti Teknologi PETRONAS.

Nik Mohamed Daud, Nik Mohd Radi (2024) Investigation of Preferential Weld Corrosion of ASTM A333 Pipes in Wet CO2: Impacts of Weld Filler, Heat Treatment, and Chemical Additives. Masters thesis, UNIVERSITI TEKNOLOGI PETRONAS.

O

Ong, Kai Je (2024) The effects of spray distance on the mechanical properties of Thermal Barrier Coating on 316 SSL developed by thermal flame spray. [Final Year Project] (Submitted)

Ooi, Wei Di (2024) Double-Passed Photovoltaic Thermal Solar Air Collector with Fins and PCM Honeycomb Integrated Thermal Storage. [Final Year Project] (Submitted)

Osman, Muhammad Iskandar Najmi (2024) Assessing Impact of Waste Tyre Pyrolysis Oil on Fuel Delivery Metal Corrosion and Elastomer Degradation. [Final Year Project] (Submitted)

P

Peter, Karen Cherembang Anak (2024) CFD ANALYSIS OF FIVE BLADED PDC DRILL BIT DESIGNED FOR INTERBEDDED FORMATION DRILLING. [Final Year Project] (Submitted)

R

RASUL, ADNAN (2024) OPTIMIZATION OF INTERNAL RING AND STRUCTURAL JOINT PARAMETERS FOR FATIGUE LIFE AND STRENGTH ENHANCEMENT OF KT-JOINT. Masters thesis, Universiti Teknologi PETRONAS.

Rasangika, Ambagaha Hewage Dona Kalpani (2024) Experimental and numerical investigation on vibration-assisted heat transfer of heat sinks under sinusoidal and square wave shapes. Doctoral thesis, Universiti Teknologi PETRONAS.

Remesh, Sathaniswarman (2024) Synthesis and Characterization of Oil Palm Lignin-Derived Laser-Scribed Graphene for Electrochemical Microsupercapacitor Electrodes. Doctoral thesis, UNIVERSITI TEKNOLOGI PETRONAS.

Ruwaida, Aliyu (2024) Integration of Functional Failure and Performance Data for Prognostic Health Management (PHM) of A Centrifugal Pump. Doctoral thesis, UNIVERSITI TEKNOLOGI PETRONAS.

S

S.M.Manogaran, Sashithaaran (2024) Visualization of Mixing of Different Liquids for Assessment of Mixing Efficiency. [Final Year Project] (Submitted)

SOOMRO, AFZAL AHMED (2024) ANALYSIS OF SMOTE-BASED DATA AUGMENTATION AND MACHINE LEARNING MODELS FOR BURST PRESSURE PREDICTION OF OIL AND GAS PIPELINES. Doctoral thesis, Universiti Teknologi PETRONAS.

Saadon, Syazmi Zul Arif Hakimi Bin (2024) Pretreatments of Napier Grass for Lignin Extraction Via Cellulolytic Enzymatic Method. Masters thesis, Universiti Teknologi PETRONAS.

Saboor, Abdul (2024) Resource Provisioning and Scheduling of Microservices for Green Secure Cloud Computing Environment. Masters thesis, Universiti Teknologi PETRONAS.

Sahat, Mohd Nurhadi (2024) The synthesis of epoxy coating reinforced with graphene oxide/mesoporous silica as coating for corrosion protection of steel structure. [Final Year Project] (Submitted)

Saibol Hamid, Muhammad Nabil Aiman (2024) Design And Fabrication of a Wireless PV Panel Monitoring System Using Long-Range RF Communications and IoT. [Final Year Project] (Submitted)

Salilew, Waleligne Molla (2024) Fault Diagnostics Modelling and Performance Evaluation in Full and Part Load Operations of a Three-Shaft Gas Turbine. Doctoral thesis, UNIVERSITI TEKNOLOGI PETRONAS.

Samuel, D'Wayne Jefferson (2024) Hybrid Photovoltaic Thermal Solar Collector with Integrated Thermoelectric Generators and Metal Heat Sink Fins. [Final Year Project] (Submitted)

Sapian, Muhammad Salman Hakim (2024) Investigation of Mechanical Properties for Carbon Fiber Prepreg Waste Reinforced with Carbon Nanotube Composite in Seawater. [Final Year Project] (Submitted)

Seshu Kumar, Vandrangi (2024) Fault Detection and Diagnostics System for Two-Phase Flow Pipelines Using Non-Linear Modeling. Doctoral thesis, UNIVERSITI TEKNOLOGI PETRONAS.

Shaharzat, Muhammad Kamil (2024) Performance Evaluation of Tensile, Flexural and Porosity Properties of Kenaf Core and Recycled Concrete in Cement Brick. [Final Year Project] (Submitted)

Shaifuddin, Muhd Abdul Rahim (2024) Water repellency, permeability and wettability of thermal insulation materials for pipeline. [Final Year Project] (Submitted)

Shane, Christian Caleb Anak (2024) Evaluate the Hydrogen Diffusivity in Transmuted Plasma-Facing Materials. [Final Year Project] (Submitted)

Shariffuddin, Muhammad Nabil Fahmy (2024) Performance Evaluation of Compressive Strength, Density and Water Absorption Properties of Kenaf Core and Quarry Dust in Cement Brick. [Final Year Project] (Submitted)

Sharwar, Mohamed Raza Saquib (2024) Computational Modeling of Lithium-Ion Battery Packs with Varied Cell Spacing for Optimal Thermal Management Using Forced Air Cooling. [Final Year Project] (Submitted)

Solahudin, Syaqir Aiman (2024) Comparative Structural Analysis of Shaped Steel Lazy Wave Riser, Steel Catenary Riser and Steel Lazy Wave Riser for Ultra-deepwater Applications. [Final Year Project] (Submitted)

Suhazahari, Hazim Thaqif (2024) Design of test rig for static structural testing of offshore tubular joints. [Final Year Project] (Submitted)

Sumantere, Shahira Naziha (2024) Corrosion Study on Graphene Reinforced Epoxy Coated Mild Steel in Hydrogen Sulphide (H2S) Environment. [Final Year Project] (Submitted)

Sundarajan, Thaneswaran (2024) Material Selection for Blanket Layer Fusion Reactor. [Final Year Project] (Submitted)

Syarizal, Shah Hayziem (2024) CFD Analysis on Phase Change Materials (PCM) – Copper Meshed in Office Heating, Ventilation and Air Conditioning (HVAC) System. [Final Year Project] (Submitted)

Syed Mohd Husainy, Sharifah Hannah (2024) Experimental and Molecular Study of Uncaria Gambir as Green Corrosion Inhibitor for Steel. [Final Year Project] (Submitted)

T

TAN, KELLY (2024) INVESTIGATING THE INFLUENCE OF MONOVALENT AND BIVALENT IONS IN BRINE ON CARBON DIOXIDE ADSORPTION IN SHALE. [Final Year Project] (Submitted)

Tamilarasu, Sangiitha (2024) Study on the Effects of Flow Baffles on the Heat Transfer in a Cold Water Reservoir. [Final Year Project] (Submitted)

Tan, Derek Weng Hin (2024) Performance and emission investigation of a compression ignition engine powered with palm waste biodiesel. [Final Year Project] (Submitted)

Tan, Gabriel Xiao Ke (2024) Synthesis and Characterization of Zinc Oxide Nanoparticles for Enhanced LED Packaging. [Final Year Project] (Submitted)

Tan, Li Lun (2024) Effect of Hybrid Fillers on the Flexural Performance of 3D Fibre-Reinforced Composites. [Final Year Project] (Submitted)

Tham, Jian Yang (2024) Effect of Tilt Angle on Soiling of Solar Panel in Perak Tengah, Malaysia. [Final Year Project] (Submitted)

W

Wong, Chen Chee (2024) The Influence of Rubberwood Ash and Alumina Fillers on The Thermal Performance of The Epoxy Based Intumescent Fire-Retardant Coating. [Final Year Project] (Submitted)

Wong, Roger Yi Qin (2024) Fault diagnosis of PV plant using digital twin technology. [Final Year Project] (Submitted)

Y

YAP, SHAN NING (2024) THE POTENTIAL OF SYNTHESIZING SILVER NANOPARTICLES FROM MICROALGAE FOR THE ANTIBACTERIAL APPLICATION. [Final Year Project] (Submitted)

Yap, Yi Xian (2024) Optimization of Oxide Layer Formation on Carbon Steel for its Corrosion Behaviour in H2S Environment. [Final Year Project] (Submitted)

Yusoff, Mohamad Azfar (2024) Modelling and Simulation of a Diesel-Electric Hybrid Ship Propulsion System. [Final Year Project] (Submitted)

Yusri, Muhammad Ali Syaharzuhdi (2024) Degradation of composite in hydrogen environment. [Final Year Project] (Submitted)

Z

Zaimi, Qamariah (2024) MODELLING AND ANALYSIS OF ACTIVE ELECTRIC POWER STEERING CONVERTED FROM HYDRAULIC POWER STEERING FOR EV PASSENGER CAR ENHANCED PERFORMANCE. [Final Year Project] (Submitted)

Zainal Abidin, Adam Harith (2024) Development of diaphragm-based fibre Bragg grating (FBG) geophone for seismic acquisition. [Final Year Project] (Submitted)

Zainol, Najmuddin Mifdhal (2024) Photovoltaic Thermal Solar Collector with PCM Embedded Porous Media Absorber. [Final Year Project] (Submitted)

Zainuddin, Hafiz Hazmirul (2024) Development Of Materials Informatics: The Materials “Gene” For Alloy In Charge in Nuclear Fusion Reactor. [Final Year Project] (Submitted)

Zainul Hisyam, Abdul Hanan (2024) Simulated Tank Leaking Detecting Using Acoustic Emission (Ae) Technology For Inspection And Monitoring Of Tank In Process Industry. [Final Year Project] (Submitted)

Zamri, Harith (2024) Computational Fluid Dynamics Analysis of Polycrystalline Diamond Compact Drill Bit Nozzle Efficiency Designed for Interbedded Formation Drilling. [Final Year Project] (Submitted)

Zamri, Muhammad Irfan (2024) Analysing Effect of Cutter Size of “Polycrystalline Diamond Compact Drill Bit” On Rate of Penetration Using Discrete Element Modelling. [Final Year Project] (Submitted)

Zuhri, Adib Haqqi (2024) Pipe Dented Identification by Using Fiber Bragg Grating Sensor. [Final Year Project] (Submitted)

Zuraini, Nur Fathiah Husna (2024) Exploring The Efficiency of FDM Foam Filters: Implications for Flow Rate and Sand Production Control. [Final Year Project] (Submitted)