Items where Department / MOR is "Chemical" and Year is 2026
A
ABDUL RAHIM, ABDUL RAHMAN (2026) DEVELOPMENT OF POLYETHYLENEIMINE-FUNCTIONALIZED SILICA NANOCAPSULE ADSORBENT VIA CO-CONDENSATION FOR CO2 CAPTURE. Doctoral thesis, UNIVERSITI TEKNOLOGI PETRONAS.
ANUWAR, MIKAIL (2026) Technoeconomic Engineering Analysis of a Microchannel Reactor for Biodiesel Production Using WCO. [Final Year Project] (Submitted)
ASUBONTENG, DAVID (2026) ENHANCEMENT OF RARE EARTH ELEMENTS LEACHING FROM ION ADSORPTION CLAY USING IONIC LIQUIDS. Masters thesis, UNIVERSITI TEKNOLOGI PETRONAS.
Abdul Razib, Qurratu Ain (2026) Evaluating Hazard Prevention Strategies and Their Effectiveness in Minimizing Risks Involving Fire Incidents In Chemical Engineering Processes. [Final Year Project] (Submitted)
Abdul Yakup, Abdul Mukmin (2026) Process Modelling And Techno-Economic Analysis For Scale-Up Of Citric Acid-Glycerol Assisted Leaching For Copper Recovery From Electronic Waste. [Final Year Project] (Submitted)
Aeizaal Azman, Arif Danial (2026) Study of Safety Risk Arising from the Use of Natural Gas Infrastructure for Mixtures of Hydrogen and Natural Gas. [Final Year Project] (Submitted)
Ahmad Suhaim, Farah Natasya (2026) Heavy Metal Analysis of Palm Oil Mill Effluent–Derived Biochar Produced at Different Pyrolysis Conditions. [Final Year Project] (Submitted)
Ahmad Yani, Nur Izzatul Alisya (2026) Human Reliability Analysis for Fission Nuclear Reactor. [Final Year Project] (Submitted)
Ali, Mohd Aznil (2026) Influence of Linker-to-Metal Ratio on the Defect Density and Thermal Stability of UiO-66. [Final Year Project] (Submitted)
Ali Asgar, Sitti Sarah (2026) Development of Modified Microalgae Biochar As Adsorbent for Ammonium Removal in Wastewater Through MACC. [Final Year Project] (Submitted)
Alifya, Safira (2026) A Multiscale Modeling Framework for Recycling of Strategic Metals. [Final Year Project] (Submitted)
Amran, Muhamad Iqbal Naim (2026) Proline As A Biodegradable Thermodynamic Hydrate Inhibitor For Lean Gas Mixture Application. [Final Year Project] (Submitted)
Anak Jawa, Elisha Yesennia (2026) Removal of Methylene Blue Dye Using Raw Orange Peel: Effect of Key Parameters, Characterisation and Isotherm Studies. [Final Year Project] (Submitted)
Anak Usik, Ryan Buja (2026) Subambient Passive Radiative Cooling with PMMA and TiO₂. [Final Year Project] (Submitted)
Azahar, Sarah Nur Hadirah (2026) Development Of Woodchip-Derived Biochar For Enhanced Removal Of Methylene Blue Dye From Wastewater. [Final Year Project] (Submitted)
Azizul Zainif, Afif Nazhan (2026) Pelletized Amine-Functionalized Silica-Nanocapsules Adsorbent for CO2 Adsorption. [Final Year Project] (Submitted)
Azman, Nur Masyitah (2026) Carbon Capture Potential Analysis for Flue Gases from Steel Manufacturing Plant. [Final Year Project] (Submitted)
Azman, Rushda Nur (2026) Experimental and Numerical Study of Black Powder Dust Dispersion in a 20 L Explosion Chamber. [Final Year Project] (Submitted)
Azrol Hisham, Muhammad Adam Walid (2026) Phytotoxic Impact Assessment of POME-Derived Biochar for Soil and Crop Applications. [Final Year Project] (Submitted)
B
BANO, HAFSA (2026) THIN FILM NANOCOMPOSITE MEMBRANES WITH POLYVINYLPYRROLIDONE AND GRAPHENE OXIDE FOR FORWARD OSMOSIS OIL-WATER SEPARATION. Doctoral thesis, UNIVERSITI TEKNOLOGI PETRONAS.
Bador Esam, Muhammad Danish Asyrani (2026) Design Of Low-Carbon Integrated Energy-Water Systems Using Pinch Analysis. [Final Year Project] (Submitted)
Bahri, Muhammad Dasyir Danial (2026) Enzymatic Synthesis And Optimization Of Neopentyl Glycol Diester For Ev Thermal Fluids: A Comparative Performance Analysis With The Monoester. [Final Year Project] (Submitted)
Benjamim Samussone Chilenge, William (2026) Microwave-Assisted Synthesis of Glycerol Carbonate via the Carbonylation of Glycerol with Urea. [Final Year Project] (Submitted)
Bih Tong, Amanda Lau (2026) Development of ZIF-8-Based Monolith Membrane for CO2 Removal from CH4. [Final Year Project] (Submitted)
Bruce, Alexandro Chanson (2026) Synthesis Of Microalgae-Derived Carbon For Supercapacitor Electrodes: Fabrication, Characterization And Electrochemical Performance. [Final Year Project] (Submitted)
Bulan Sawing, Karen (2026) Synthesis And Characterization of Pristine Hydroxylammonium Nitrate (HAN) Solution. [Final Year Project] (Submitted)
C
Chen, Yee Juin (2026) Blend Polymeric Membrane for CO₂ / CH₄ Separation. [Final Year Project] (Submitted)
Chuang, Chuang Awow Daniel (2026) In Situ Percitric Acid as a Green Alternative to Peracetic Acid in Waste Palm-Based Cooking Oil Epoxidation. [Final Year Project] (Submitted)
Cipriano Maluleque, Clivans (2026) Simulation Model For Monitoring Of Fouling In Heat Exchangers. [Final Year Project] (Submitted)
D
Dennis, Lery (2026) Process Fault Detection and Diagnosis Using Kernel Principal Component Analysis and K-Nearest Neighbour. [Final Year Project] (Submitted)
Devadas, Daanusri (2026) Scenario-Based Assessment Of Integrated Energy-Water-Carbon Nexus Performance Using Pinch Analysis. [Final Year Project] (Submitted)
Dos Santos Bié, Diocleciana Isabel (2026) Assessment of Defatted Microalgae Biomass as a Carbon Source for Bio-surfactant Production. [Final Year Project] (Submitted)
E
Evaristus, Adam Fabian (2026) Removal of Congo Red using Carbonized Pomelo Peel as Low-Cost Biosorbent: Comparison with Commercial Activated Carbon. [Final Year Project] (Submitted)
F
Faduco, Darcilene Da Clara (2026) Epoxidation of Palm Olein Using Sustainable Citric Acid and Hydrogen Peroxide. [Final Year Project] (Submitted)
G
GARDIOLA, OKTORIFO (2026) ADAPTIVE PROCESS FAULT DETECTION USING MULTISCALE RECURSIVE PRINCIPAL COMPONENT ANALYSIS. Masters thesis, UNIVERSITI TEKNOLOGI PETRONAS.
H
Hasri, Nadiah Zawiah (2026) Designing Osha-Compliant Emergency Response Systems For Aging Industrial Operations: A Framework Approach. [Final Year Project] (Submitted)
Hassan, Ahmad Lutfil Hadi (2026) Catalyst Effects on Bio-Oil Via Microwave-Assisted Catalytic Cracking of Defatted Microalgae Biomass. [Final Year Project] (Submitted)
Hasyrein, Haidan Edruz Danish (2026) Evaluation of Antioxidant Additives Extracted from Agro Wastes in Prolonging Biodiesel’s Oxidative Stability. [Final Year Project] (Submitted)
H’ng Yung Wai, Aaron (2026) Quantitative Risk Assessment For Deuterium Production Process. [Final Year Project] (Submitted)
I
Inderjeet Singh, Amrita Kaur (2026) The Development and Characterization of Ni/Al/Ti₃C₂ MXene catalyst. [Final Year Project] (Submitted)
J
Johari, Muhammad Zainularif (2026) Valorisation Of Decomposed Green Waste Into Humic Acid For Bioenergy Production. [Final Year Project] (Submitted)
Johari, Nabil (2026) Decarbonization of Gas Processing Plant Utility Island. [Final Year Project] (Submitted)
John, Darell (2026) Exploring The Effect Of Various Solvents On Oil Recovery From Solid Biomass. [Final Year Project] (Submitted)
Juing, Marcella Sebi (2026) Application Of Photosynthetic Bacteria As Biofertilizer For Cultivation Of Mung Bean. [Final Year Project] (Submitted)
Justin, Vena (2026) Evaluation of Food-Waste-Derived Adsorbents as Sustainable Alternatives for Phosphorus Removal from Sewage. [Final Year Project] (Submitted)
K
KHAN, MUHAMMAD IRFAN (2026) PHOSPHORIC ACID GEOPOLYMERS BASED ADSORBENTS FOR METHYLENE BLUE REMOVAL: SYNTHESIS, KINETICS AND MACHINE LEARNING PREDICTIONS. Doctoral thesis, UNIVERSITI TEKNOLOGI PETRONAS.
Kailasam, Liroshen Kumar (2026) Mineral Carbonation-derived Concrete Binders for Net Zero Concrete. [Final Year Project] (Submitted)
Kamarozaman, Amir Hamzah (2026) Experimental Carbon Stock Assessment And Baseline Database Development For Mangrove Ecosystem. [Final Year Project] (Submitted)
Kamarudin, Khairie Haziq (2026) The Elucidation Of The Kinetic Mechanism Of Biohydrogen Production From Chicken Manure And Sawdust Via Dark Fermentation. [Final Year Project] (Submitted)
Khairil Rizal, Nia Nur Alyssa (2026) Effect Of CO2 Microbubble Size On Carbonation Kinetics And Calcium Carbonate Formation. [Final Year Project] (Submitted)
Khairul Anuar, Khairin Nusair (2026) Evaluation Of Lohc Hydrogenation–Dehydrogenation Processes For Multi-Objective Optimization. [Final Year Project] (Submitted)
Khairul Bashah, Nurul Atiqah (2026) Thermal Modelling of Secondary Battery. [Final Year Project] (Submitted)
Khairul Izwan, Muhammad Aiz Syahkirin (2026) Process Fault Detection And Diagnosis Techniques Using Auto Associative Neural Network (AANN) With Support Vector Machine (SVM). [Final Year Project] (Submitted)
Khairul Lani, Nurul Husna (2026) Cultivation of Photosynthetic Bacteria for Polyhydroxyalkanoate (PHA) Production. [Final Year Project] (Submitted)
Khairuzzaman, Luqman Nurhakim (2026) Optimization Study on Electrocatalytic Reduction of CO2 to Methanol using Machine Learning Tools with Value Creation. [Final Year Project] (Submitted)
Khalib, Siti Najjwa (2026) Fabrication of ZIF-8/CTA Monolith Membrane for CO2 and N2 Gas Permeation. [Final Year Project] (Submitted)
Kumar, Krisa Nagendra (2026) Natural Deep Eutectic Solvent And Ultrasound-Assisted Extraction Of Bioactive Corrosion Inhibitors From Palm Oil Mill Effluent. [Final Year Project] (Submitted)
Kumara Thevar, Nimelan (2026) Effect Of Ionic Liquid Concentration In Alkaline Water Electrolysis On Green Hydrogen Production And Cost. [Final Year Project] (Submitted)
L
L Imbun, Thorndyke (2026) Rare Earth Elements (REEs) Detection in Soil Using Laser-Induced Breakdown Spectroscopy (LIBS). [Final Year Project] (Submitted)
Lasilla, Mohammad Rizzuansyah (2026) Environmental Water Performance Evaluation Of Integrated Energy-Water Systems Using Pinch Analysis. [Final Year Project] (Submitted)
Lew, How Yin (2026) Mixed-Metal MOF Templated Catalyst For Carbon Dioxide Capture And Methanation. [Final Year Project] (Submitted)
Lim, Sze Yang (2026) Molecular-Level Investigation Of Graphene Oxide Filler Loading Effects In Polysulfone Based Mixed Matrix Membranes For Co₂/Ch₄ Separation. [Final Year Project] (Submitted)
Ling, Kelly Shi Shieng (2026) Removal of Various Dyes From Wastewater Using OPB/MWCNT-Reinforced PVA Hydrogels. [Final Year Project] (Submitted)
Lisban, Bramathevan (2026) Electrolyzer Monitoring System. [Final Year Project] (Submitted)
Loh Jieyu, Joyce (2026) Molecular Design of Mg-Ni Metal Hydrides for Safe Hydrogen Storage. [Final Year Project] (Submitted)
M
M Khairul Amar, Aini Syamimi (2026) Performance Evaluation of Glycine as an Alternative Thermodynamic Gas Hydrate Inhibitor (THI) for Lean Gas System. [Final Year Project] (Submitted)
Mahali, Muhammad Nabil (2026) Pelletization of AC/APTMS Composite for Carbon Dioxide Direct Air Capture. [Final Year Project] (Submitted)
Mani Arasu, Shree Kailasshnee (2026) A Study on Volarization of Palm Oil Mil Effluent as A Sustainable Source of BioBased Corrosion Inhibitors Via Green Solvent Extraction. [Final Year Project] (Submitted)
Mat Sahwira, Nur Aina Nazurah (2026) Formulation And Characterization Of NPG Diester-Based Thermal Fluids Enhanced With Nanoparticles For Electric Vehicle Applications. [Final Year Project] (Submitted)
Mazelan, Ahmad Amer Izwan (2026) Investigation of Diffusion-Controlled Gelation Kinetics and Empirical Modelling of Calcium-Induced Crosslinking in Sodium Alginate. [Final Year Project] (Submitted)
Md Azhari, Radzwan Najmi (2026) Recovery of Neodymium and Dysprosium from Hard Disk Drives Using Deep Eutectic Solvent. [Final Year Project] (Submitted)
Md Hisham, Muhammad Mustaqim (2026) Design of an AI-Assisted Greenhouse Gas (GHG) Accounting and Inventory System for Scope 1 and Scope 2 Emissions. [Final Year Project] (Submitted)
Mohamad Rozaidi, Anis Farhana (2026) Simulation-Based Kinetic Modelling of CO2 Adsorption on Amine�Impregnated Silica Nanocapsule. [Final Year Project] (Submitted)
Mohamad Shaiful, Nur Danisha Aliyah (2026) Assessment Of Kenaf-Based Activated Carbon For Efficient Free Fatty Acid (FFA) Adsorption In Waste Cooking Oil. [Final Year Project] (Submitted)
Mohamed Mustaffa, Mohamad Aiman (2026) Ozonolysis Enhanced Gold Leaching Using Choline Chloride – Malic Acid Deep Eutectic Solvent. [Final Year Project] (Submitted)
Mohammad Fauzi, Puteri Nuralia Syazliyana (2026) Techno-Economic Assessment Of Offshore Acid Gas Absorption System Using Different Solvents. [Final Year Project] (Submitted)
Mohammad Nasir, Nur Dalila (2026) Epoxidation of RBD Palm Olein Using Urea–Hydrogen Peroxide as an Alternative to Hydrogen Peroxide: Reaction Mechanisms and Epoxide Performance. [Final Year Project] (Submitted)
Mohammed Ali, Tasnim Batrisyia (2026) Recovery Of Natural Pigment Of Organic Waste For Application As Natural Ph Indicator. [Final Year Project] (Submitted)
Mohana Sundaram, Surya Prasath (2026) Development Of Carbon-Doped Tio₂ Photoanodesfor H₂ Production Via Photoelectrochemical (Pec) Water Splitting. [Final Year Project] (Submitted)
Mohd Amin, Afiqah Ayuni (2026) A Dynamic Carbon Accounting Framework for Bioethanol-to-Hydrogen via Chemical Looping: Integrating Biogenic Carbon Credits with Process-Level Leakage Analysis. [Final Year Project] (Submitted)
Mohd Ariffin, Rina Harisha (2026) Evaluation of Antimicrobial Properties in Wound-Healing Hydrogel Using Kenaf Carbon Quantum Dot. [Final Year Project] (Submitted)
Mohd Asyraf Tiong, Cedrick Zharif (2026) Evaluation Of Natural Waste Materials As Bio-Coagulants For Wastewater Treatment. [Final Year Project] (Submitted)
Mohd Azahari, Mohamad Haziq Imran (2026) Thermal Aging Behaviour Of NPG Diester Based Thermal Fluid For Electrical Vehicle Application. [Final Year Project] (Submitted)
Mohd Azmil Effendi, Muhammad Saiful Azimuddin (2026) Optimization of Synthesis parameters for MoS2–Based Cathode for Enhanced Li–S Battery Performance. [Final Year Project] (Submitted)
Mohd Fauzi, Nurelyna Syamimie (2026) Effect Of Tetraethylenepentamine (TEPA) Concentration On CO₂ Absorption Efficiency and Its Application in Integrated Carbon Capture and Mineralization. [Final Year Project] (Submitted)
Mohd Hairul, Nurafiqah (2026) Feasibility of Gas Sensor Arrays for Volatile-Based Honey Screening. [Final Year Project] (Submitted)
Mohd Hanafiah, Nurhanan (2026) UIO-66/GO Composite for Hydrogen Sulphide Removal. [Final Year Project] (Submitted)
Mohd Kamil Hadsrim, Nurhani Hadsliza (2026) Effect Of Particle Size On Explosion Severity Of Lithium-Ion Battery Black Mass In A 20L Spherical Chamber. [Final Year Project] (Submitted)
Mohd Khairulanuar, Aisya Afiqah Ajmal (2026) Rheological Behaviour of Wound-Healing Hydrogels Loaded with Carbon Quantum Dots. [Final Year Project] (Submitted)
Mohd Zaf Idzwan, Norliyana Izzati (2026) Rare Earth Elements Extraction Using Aqueous Deep Eutectic Solvent As A Green Leaching Agent. [Final Year Project] (Submitted)
Mohd Zaid, Nurul Azhani (2026) Inherently Safer Process Route Ranking Index (ISPRRI) for Sustainable Process Design. [Final Year Project] (Submitted)
Mohmad Yasin, Nur Farhanah (2026) Valorization Of Durian Seeds Through Extraction, Separation And Purification Of Durian Seed Oil Via Supercritical Fluid Extraction. [Final Year Project] (Submitted)
Mok, Yong Jun (2026) Hybrid Mechanistic Data Driven Modeling of Surfactant Impacts on Biogas Production. [Final Year Project] (Submitted)
Muhammad Akmal, Raffa (2026) Modelling and Simulation of Dividing Wall Column for Depropanizer. [Final Year Project] (Submitted)
Muhammad Sofuan Fathi, Ahmad Ershad (2026) Cooling Strategy of Integrated Circuit using Microchannel. [Final Year Project] (Submitted)
Muin, Wellmon Welly (2026) Environmental Life Cycle Analysis of Rubber Seed Shell-Based Activated Carbon Production using Green Activation Routes. [Final Year Project] (Submitted)
Muslim, Robeahtul Idayu (2026) Effect of Reaction Conditions on Bio-Oil Production via Microwave-assisted Catalytic Cracking of Defatted Microalgae. [Final Year Project] (Submitted)
Mustafa, Nur Syahirah Nazihah (2026) Effect of Tetraethylenepentamine Loading on Simultaneous CO2 Absorption and Mineralisation. [Final Year Project] (Submitted)
N
Noorudin, Muhammad Azfar (2026) Influence of pH on Microbubble-Assisted CO₂ Carbonation for Calcium Carbonate Synthesis. [Final Year Project] (Submitted)
Nor Hisham, Muhammad Aidil Hafiz (2026) A Genetic Polynomial Regression Methodology for Non-Linear Data Modelling. [Final Year Project] (Submitted)
Nordin, Aisyah Sofea (2026) Ecotoxicological Evaluation of Biochar Derived from Palm Oil Mill Effluent (POME) Using Aquatic Toxicity Bioassays. [Final Year Project] (Submitted)
Nurdin, Nur Syahalisah (2026) Design and Comparative Analysis of Butanal Isomer Separation Using Conventional and Dividing-Wall Distillation Columns. [Final Year Project] (Submitted)
O
Omar, Muhammad Irfan Amrullah (2026) Effect of Graphene Loading on the Absorption of Halogenated Organic Solvents and Electrical Properties of Polydimethylsiloxane Composites. [Final Year Project] (Submitted)
P
Parameswaren, Sharwineswaren (2026) Hydrothermal Carbonization Of Biomass: Influence Of Process Conditions On Hydrochar Properties And Fuel Performance. [Final Year Project] (Submitted)
Past Year Exam Question (2026) OBC5123 PRINCIPLES OF HAZARD ANALYSIS & RISK MANAGEMENT. [Past Year Examination Question]
Past Year Exam Question (2026) OBC5153 HUMAN FACTORS. [Past Year Examination Question]
Past Year Exam Question (2026) OBC5253 INCIDENT PREVENTION & EMERGENCY MANAGEMENT. [Past Year Examination Question]
Past Year Exam Question (2026) OBC5263 ENVIRONMENTAL RISK & IMPACT ASSESSMENT. [Past Year Examination Question]
Past Year Exam Question (2026) OBI5013 HEAT INTEGRATION. [Past Year Examination Question]
Past Year Exam Question (2026) OBI5023 MODELLING. [Past Year Examination Question]
Past Year Exam Question (2026) OBI5033 OPERABILITY AND CONTROL. [Past Year Examination Question]
Past Year Exam Question (2026) OBI5143 COGENERATION & SITE UTILITY SYSTEMS. [Past Year Examination Question]
Past Year Exam Question (2026) OBI5183 ENVIRONMENTAL DESIGN FOR ATMOSPHERIC EMISSION. [Past Year Examination Question]
Past Year Exam Question (2026) OBI5193 ENVIRONMENTAL DESIGN FOR AQUEOUS EMISSION. [Past Year Examination Question]
Pratama, Muhammmad Ardi (2026) Assessment Of Synergistic Bio-Oil Yield From Napier Grass And LDPE Fast Co-Pyrolysis. [Final Year Project] (Submitted)
Putri Aprillia, Bunga Asih (2026) Machine Learning Driven Prediction Of CO₂ Solubility Inside Brine. [Final Year Project] (Submitted)
R
Ramadhani Anas, Putri (2026) Statistical Analysis Of Reaction Conditions For Bio-Oil Production From Microalgae Via Catalytic Microwave Pyrolysis. [Final Year Project] (Submitted)
Ravichandran, Shahindran (2026) Predictive Modelling of Ignition Sensitivity for LCO and NMC Black Mass Based on Minimum Ignition Energy (MIE) and Minimum Ignition Temperature (MIT). [Final Year Project] (Submitted)
Rosli, Intan Batrisya (2026) Design And Analysis Of Seawater Reverse Osmosis (Swro) Desalination Using Aquagrid By Toray. [Final Year Project] (Submitted)
Rozario, Ryaan James (2026) Development of Novel Cerium Gallate Metal–Organic Framework for Enhanced Carbon Dioxide Adsorption Synthesized via Room Temperature Vapor Assisted Conversion. [Final Year Project] (Submitted)
Rozli, Harith Naim (2026) Bio-Coagulants for Bod Reduction In Palm Oil Mill Effluent (POME) For Safe Discharge. [Final Year Project] (Submitted)
Rusli, Muhammad Hakim (2026) Effects of Ionic Liquids in Alkaline Water Electrolysis of Seawater. [Final Year Project] (Submitted)
S
SULEMAN, FARHEEN (2026) FUNCTIONALIZATION OF RUBBER SEED SHELL ACTIVATED CARBON WITH ETHANOL AMMONIUM BUTYRATE IONIC LIQUID FOR HIGH PERFORMANCE CO₂ ADSORPTION. Masters thesis, UNIVERSITI TEKNOLOGI PETRONAS.
Sallehudin, Nurlin Saliha (2026) Development of Solar - Driven Biomass - Based PVA Hydrogel for the Removal of Methylene Blue and Methyl Orange from Wastewater. [Final Year Project] (Submitted)
See, Jing Han (2026) Inherent Safety and Process Optimization for Ammonia Synthesis Loop. [Final Year Project] (Submitted)
Shaharul Razi, Ilina Shafiya (2026) Co‑Cracking of Defatted Microalgae Biomass and Plastic Waste for Enhanced Bio‑Oil Production via Microwave‑Assisted Catalytic Cracking. [Final Year Project] (Submitted)
Shamsudin, Raudatunnur (2026) Development of Quantitative Structure-Property Model for Predicting the Autoignition Temperature of Carbon-6 Organic Solvents with Experimental Validation. [Final Year Project] (Submitted)
Sharfudin, Muhamad Aniq Najwan (2026) Effect of Synthesis Temperature on the Structural, Morphological, and Thermal Properties of UiO-66. [Final Year Project] (Submitted)
Silverio Albino, Adelaide (2026) Synthesis of Carbon Aerogels Using Amine-infused Coconut Shells and Fly Ash with Poly (acrylamide-co-acrylic acid) for CO2 Capture. [Final Year Project] (Submitted)
Sofyuddin, Muhammad Akhtar (2026) Characterization Of Bioink Use For 3d Bioprinting. [Final Year Project] (Submitted)
Suhaimi, Jazrin Haikal (2026) Shaping Metal Organic Framework for Carbon Dioxide Capture. [Final Year Project] (Submitted)
Sulaiman, Nur Iellyana Fasha (2026) Study Of Hydrodynamic Flow Distribution On Novel Manifold Microchannel Reactor Design Using 3d-Printing Fabrication Method. [Final Year Project] (Submitted)
Sunny, Silvestre Ronaldo Jr (2026) Amination Of Waste Cooking Oil Using Diethanolamine For The Synthesis Of Bio-Based Polyols. [Final Year Project] (Submitted)
T
T Rudy, Shareen (2026) Hydrogen Production by Chemical Looping Reforming Of Ethanol-Glycerol Blend Over Modified Ceria Oxygen Carrier. [Final Year Project] (Submitted)
Tai Zun Sitt, Pegus (2026) Performance recovery of cellulose acetate membranes for CO₂/CH₄ separation after heavy hydrocarbon contamination. [Final Year Project] (Submitted)
Tan, Jie Wei (2026) Experimental Investigation And Data-Driven Modeling Of The Minimum Ignition Temperature Of Polylactic Acid Dust. [Final Year Project] (Submitted)
Teng, Shiaw Kenn (2026) Experimental Evaluation of Metal Dust Explosion Parameters and Process Hazard Assessment in EV Battery Recycling. [Final Year Project] (Submitted)
Teoh, Xiao Wei (2026) Battery Inner Pouch Protective Layer Analysis. [Final Year Project] (Submitted)
Thor, Yee Hang (2026) Effect of Solvent System on the Structural Formation and Thermal Behaviour of UiO-66. [Final Year Project] (Submitted)
Tie Jia Yi, Evonne (2026) Investigation of One-Pot Microalgae Biodiesel Conversion via Supercritical CO2. [Final Year Project] (Submitted)
Tung, Shao Lun (2026) Dose Dependent Impacts Of Surfactants On Methane Yield And COD Removal: A Cross-Sectoral Study. [Final Year Project] (Submitted)
V
V Vejayan, Kuhaneshwary (2026) Development and Characterization of KOH-Activated Rubber Seed Shell Biochar for Lead(II) Removal from Aqueous Solution. [Final Year Project] (Submitted)
VIRIYA, VINOSHA (2026) MIXED MATRIX MEMBRANES INCORPORATED WITH MODIFIED UZM-5 ZEOLITE FOR IDEAL CO2/CH4 SEPARATION. Masters thesis, UNIVERSITI TEKNOLOGI PETRONAS.
W
WISHNUWARDANA, RAFI JUSAR (2026) SOLVENT BLEND DETERMINATION MODEL FOR ABSORPTION BASED ACID GAS REMOVAL UNIT USING LIGHTGBM AND OPTUNA. Masters thesis, UNIVERSITI TEKNOLOGI PETRONAS.
Wan Azizi, Wan Ahmad Ameer Hanafi (2026) Valorization of Palm Fatty Acid Distillate (PFAD) for Biodiesel Production Using Sulfonated Coconut Shell Catalyst. [Final Year Project] (Submitted)
Wan Mazhan, Wan Muhammad Shakir (2026) Predictive Modelling of Ignition Sensitivity of Kenaf Dust Based on Minimum Ignition Energy and Temperature. [Final Year Project] (Submitted)
Wan Shukri, Syafiq Syarqawi (2026) Effects of MoS₂ Coating on Mo Mesh for CO₂ Electroreduction (CO₂ER). [Final Year Project] (Submitted)
Y
Yj, Aisyah (2026) Enhanced Recovery Of Rare Earth Elements Using A Citric - Malic Acid Binary Organic Acid System. [Final Year Project] (Submitted)
Yusmi, Muhammad Zahin Danish (2026) Identification of Process Water Loop Restriction in HP Reactor using CFD. [Final Year Project] (Submitted)
Yusri, Danial Hakimi (2026) An investigation of Flow Behavior and Pressure Loss of Gas Flow in Pipe. [Final Year Project] (Submitted)
Z
Zabri, Nur Khalilah (2026) Hydrogen Production by Chemical Looping Reforming of Ethanol-Glycerol over Modified Lanthanum Oxygen Carrier. [Final Year Project] (Submitted)
Zaidee, Muhamad Amirul Hakim (2026) Theoretical Insights Into The Stability And Activity Of REE-Ni Electrocatalysts Is Seawater Electrolysis: A Density Functional Theory Approach. [Final Year Project] (Submitted)
Zulkiflee, Zullfakar (2026) Evaluation of the Ash Fusion Behaviour of Palm Oil Decanter Cake–Bentonite Blends for Gasification Applications. [Final Year Project] (Submitted)
Zulkifli, Qalam Arif (2026) Development of Microalgae-Enriched Probiotics with Water Kefir Fermentation and Evaluation of Yield and Viability. [Final Year Project] (Submitted)
Zuraidy, Noralya (2026) Sonodegradation of Phenylphenol in Aqueous Solution in Presence of Particulates Materials. [Final Year Project] (Submitted)
UTPedia
Up a level