Browse by Type

A

Ahmad Suhaim, Farah Natasya (2026) Heavy Metal Analysis of Palm Oil Mill Effluent–Derived Biochar Produced at Different Pyrolysis Conditions. [Final Year Project] (Submitted)

Abdul Yakup, Abdul Mukmin (2026) Process Modelling And Techno-Economic Analysis For Scale-Up Of Citric Acid-Glycerol Assisted Leaching For Copper Recovery From Electronic Waste. [Final Year Project] (Submitted)

ANUWAR, MIKAIL (2026) Technoeconomic Engineering Analysis of a Microchannel Reactor for Biodiesel Production Using WCO. [Final Year Project] (Submitted)

Anak Jawa, Elisha Yesennia (2026) Removal of Methylene Blue Dye Using Raw Orange Peel: Effect of Key Parameters, Characterisation and Isotherm Studies. [Final Year Project] (Submitted)

Azman, Nur Masyitah (2026) Carbon Capture Potential Analysis for Flue Gases from Steel Manufacturing Plant. [Final Year Project] (Submitted)

Anak Usik, Ryan Buja (2026) Subambient Passive Radiative Cooling with PMMA and TiO₂. [Final Year Project] (Submitted)

Azahar, Sarah Nur Hadirah (2026) Development Of Woodchip-Derived Biochar For Enhanced Removal Of Methylene Blue Dye From Wastewater. [Final Year Project] (Submitted)

Ali Asgar, Sitti Sarah (2026) Development of Modified Microalgae Biochar As Adsorbent for Ammonium Removal in Wastewater Through MACC. [Final Year Project] (Submitted)

Abdul Razib, Qurratu Ain (2026) Evaluating Hazard Prevention Strategies and Their Effectiveness in Minimizing Risks Involving Fire Incidents In Chemical Engineering Processes. [Final Year Project] (Submitted)

Ahmad Yani, Nur Izzatul Alisya (2026) Human Reliability Analysis for Fission Nuclear Reactor. [Final Year Project] (Submitted)

Azizul Zainif, Afif Nazhan (2026) Pelletized Amine-Functionalized Silica-Nanocapsules Adsorbent for CO2 Adsorption. [Final Year Project] (Submitted)

Amran, Muhamad Iqbal Naim (2026) Proline As A Biodegradable Thermodynamic Hydrate Inhibitor For Lean Gas Mixture Application. [Final Year Project] (Submitted)

Ali, Mohd Aznil (2026) Influence of Linker-to-Metal Ratio on the Defect Density and Thermal Stability of UiO-66. [Final Year Project] (Submitted)

Azrol Hisham, Muhammad Adam Walid (2026) Phytotoxic Impact Assessment of POME-Derived Biochar for Soil and Crop Applications. [Final Year Project] (Submitted)

Alifya, Safira (2026) A Multiscale Modeling Framework for Recycling of Strategic Metals. [Final Year Project] (Submitted)

Azman, Rushda Nur (2026) Experimental and Numerical Study of Black Powder Dust Dispersion in a 20 L Explosion Chamber. [Final Year Project] (Submitted)

Aeizaal Azman, Arif Danial (2026) Study of Safety Risk Arising from the Use of Natural Gas Infrastructure for Mixtures of Hydrogen and Natural Gas. [Final Year Project] (Submitted)

B

Benjamim Samussone Chilenge, William (2026) Microwave-Assisted Synthesis of Glycerol Carbonate via the Carbonylation of Glycerol with Urea. [Final Year Project] (Submitted)

Bulan Sawing, Karen (2026) Synthesis And Characterization of Pristine Hydroxylammonium Nitrate (HAN) Solution. [Final Year Project] (Submitted)

Bahri, Muhammad Dasyir Danial (2026) Enzymatic Synthesis And Optimization Of Neopentyl Glycol Diester For Ev Thermal Fluids: A Comparative Performance Analysis With The Monoester. [Final Year Project] (Submitted)

Bador Esam, Muhammad Danish Asyrani (2026) Design Of Low-Carbon Integrated Energy-Water Systems Using Pinch Analysis. [Final Year Project] (Submitted)

Bruce, Alexandro Chanson (2026) Synthesis Of Microalgae-Derived Carbon For Supercapacitor Electrodes: Fabrication, Characterization And Electrochemical Performance. [Final Year Project] (Submitted)

Bih Tong, Amanda Lau (2026) Development of ZIF-8-Based Monolith Membrane for CO2 Removal from CH4. [Final Year Project] (Submitted)

C

Cipriano Maluleque, Clivans (2026) Simulation Model For Monitoring Of Fouling In Heat Exchangers. [Final Year Project] (Submitted)

Chuang, Chuang Awow Daniel (2026) In Situ Percitric Acid as a Green Alternative to Peracetic Acid in Waste Palm-Based Cooking Oil Epoxidation. [Final Year Project] (Submitted)

Chen, Yee Juin (2026) Blend Polymeric Membrane for CO₂ / CH₄ Separation. [Final Year Project] (Submitted)

D

Dos Santos Bié, Diocleciana Isabel (2026) Assessment of Defatted Microalgae Biomass as a Carbon Source for Bio-surfactant Production. [Final Year Project] (Submitted)

Dennis, Lery (2026) Process Fault Detection and Diagnosis Using Kernel Principal Component Analysis and K-Nearest Neighbour. [Final Year Project] (Submitted)

Devadas, Daanusri (2026) Scenario-Based Assessment Of Integrated Energy-Water-Carbon Nexus Performance Using Pinch Analysis. [Final Year Project] (Submitted)

E

Evaristus, Adam Fabian (2026) Removal of Congo Red using Carbonized Pomelo Peel as Low-Cost Biosorbent: Comparison with Commercial Activated Carbon. [Final Year Project] (Submitted)

F

Faduco, Darcilene Da Clara (2026) Epoxidation of Palm Olein Using Sustainable Citric Acid and Hydrogen Peroxide. [Final Year Project] (Submitted)

H

Hassan, Ahmad Lutfil Hadi (2026) Catalyst Effects on Bio-Oil Via Microwave-Assisted Catalytic Cracking of Defatted Microalgae Biomass. [Final Year Project] (Submitted)

Hasyrein, Haidan Edruz Danish (2026) Evaluation of Antioxidant Additives Extracted from Agro Wastes in Prolonging Biodiesel’s Oxidative Stability. [Final Year Project] (Submitted)

H’ng Yung Wai, Aaron (2026) Quantitative Risk Assessment For Deuterium Production Process. [Final Year Project] (Submitted)

Hasri, Nadiah Zawiah (2026) Designing Osha-Compliant Emergency Response Systems For Aging Industrial Operations: A Framework Approach. [Final Year Project] (Submitted)

I

Inderjeet Singh, Amrita Kaur (2026) The Development and Characterization of Ni/Al/Ti₃C₂ MXene catalyst. [Final Year Project] (Submitted)

J

Juing, Marcella Sebi (2026) Application Of Photosynthetic Bacteria As Biofertilizer For Cultivation Of Mung Bean. [Final Year Project] (Submitted)

Johari, Nabil (2026) Decarbonization of Gas Processing Plant Utility Island. [Final Year Project] (Submitted)

John, Darell (2026) Exploring The Effect Of Various Solvents On Oil Recovery From Solid Biomass. [Final Year Project] (Submitted)

Johari, Muhammad Zainularif (2026) Valorisation Of Decomposed Green Waste Into Humic Acid For Bioenergy Production. [Final Year Project] (Submitted)

Justin, Vena (2026) Evaluation of Food-Waste-Derived Adsorbents as Sustainable Alternatives for Phosphorus Removal from Sewage. [Final Year Project] (Submitted)

K

Khairul Lani, Nurul Husna (2026) Cultivation of Photosynthetic Bacteria for Polyhydroxyalkanoate (PHA) Production. [Final Year Project] (Submitted)

Khairil Rizal, Nia Nur Alyssa (2026) Effect Of CO2 Microbubble Size On Carbonation Kinetics And Calcium Carbonate Formation. [Final Year Project] (Submitted)

Kumara Thevar, Nimelan (2026) Effect Of Ionic Liquid Concentration In Alkaline Water Electrolysis On Green Hydrogen Production And Cost. [Final Year Project] (Submitted)

Kamarudin, Khairie Haziq (2026) The Elucidation Of The Kinetic Mechanism Of Biohydrogen Production From Chicken Manure And Sawdust Via Dark Fermentation. [Final Year Project] (Submitted)

Khairul Anuar, Khairin Nusair (2026) Evaluation Of Lohc Hydrogenation–Dehydrogenation Processes For Multi-Objective Optimization. [Final Year Project] (Submitted)

Khairul Izwan, Muhammad Aiz Syahkirin (2026) Process Fault Detection And Diagnosis Techniques Using Auto Associative Neural Network (AANN) With Support Vector Machine (SVM). [Final Year Project] (Submitted)

Khairul Bashah, Nurul Atiqah (2026) Thermal Modelling of Secondary Battery. [Final Year Project] (Submitted)

Khalib, Siti Najjwa (2026) Fabrication of ZIF-8/CTA Monolith Membrane for CO2 and N2 Gas Permeation. [Final Year Project] (Submitted)

Khairuzzaman, Luqman Nurhakim (2026) Optimization Study on Electrocatalytic Reduction of CO2 to Methanol using Machine Learning Tools with Value Creation. [Final Year Project] (Submitted)

Kumar, Krisa Nagendra (2026) Natural Deep Eutectic Solvent And Ultrasound-Assisted Extraction Of Bioactive Corrosion Inhibitors From Palm Oil Mill Effluent. [Final Year Project] (Submitted)

Kamarozaman, Amir Hamzah (2026) Experimental Carbon Stock Assessment And Baseline Database Development For Mangrove Ecosystem. [Final Year Project] (Submitted)

Kailasam, Liroshen Kumar (2026) Mineral Carbonation-derived Concrete Binders for Net Zero Concrete. [Final Year Project] (Submitted)

L

L Imbun, Thorndyke (2026) Rare Earth Elements (REEs) Detection in Soil Using Laser-Induced Breakdown Spectroscopy (LIBS). [Final Year Project] (Submitted)

Lew, How Yin (2026) Mixed-Metal MOF Templated Catalyst For Carbon Dioxide Capture And Methanation. [Final Year Project] (Submitted)

Loh Jieyu, Joyce (2026) Molecular Design of Mg-Ni Metal Hydrides for Safe Hydrogen Storage. [Final Year Project] (Submitted)

Lim, Sze Yang (2026) Molecular-Level Investigation Of Graphene Oxide Filler Loading Effects In Polysulfone Based Mixed Matrix Membranes For Co₂/Ch₄ Separation. [Final Year Project] (Submitted)

Lasilla, Mohammad Rizzuansyah (2026) Environmental Water Performance Evaluation Of Integrated Energy-Water Systems Using Pinch Analysis. [Final Year Project] (Submitted)

Lisban, Bramathevan (2026) Electrolyzer Monitoring System. [Final Year Project] (Submitted)

Ling, Kelly Shi Shieng (2026) Removal of Various Dyes From Wastewater Using OPB/MWCNT-Reinforced PVA Hydrogels. [Final Year Project] (Submitted)

M

Mohamed Mustaffa, Mohamad Aiman (2026) Ozonolysis Enhanced Gold Leaching Using Choline Chloride – Malic Acid Deep Eutectic Solvent. [Final Year Project] (Submitted)

Mohd Hanafiah, Nurhanan (2026) UIO-66/GO Composite for Hydrogen Sulphide Removal. [Final Year Project] (Submitted)

Mohammed Ali, Tasnim Batrisyia (2026) Recovery Of Natural Pigment Of Organic Waste For Application As Natural Ph Indicator. [Final Year Project] (Submitted)

Mazelan, Ahmad Amer Izwan (2026) Investigation of Diffusion-Controlled Gelation Kinetics and Empirical Modelling of Calcium-Induced Crosslinking in Sodium Alginate. [Final Year Project] (Submitted)

Mohd Azmil Effendi, Muhammad Saiful Azimuddin (2026) Optimization of Synthesis parameters for MoS2–Based Cathode for Enhanced Li–S Battery Performance. [Final Year Project] (Submitted)

Mohd Asyraf Tiong, Cedrick Zharif (2026) Evaluation Of Natural Waste Materials As Bio-Coagulants For Wastewater Treatment. [Final Year Project] (Submitted)

Mohammad Fauzi, Puteri Nuralia Syazliyana (2026) Techno-Economic Assessment Of Offshore Acid Gas Absorption System Using Different Solvents. [Final Year Project] (Submitted)

Mohamad Rozaidi, Anis Farhana (2026) Simulation-Based Kinetic Modelling of CO2 Adsorption on Amine�Impregnated Silica Nanocapsule. [Final Year Project] (Submitted)

Mahali, Muhammad Nabil (2026) Pelletization of AC/APTMS Composite for Carbon Dioxide Direct Air Capture. [Final Year Project] (Submitted)

Mohd Zaf Idzwan, Norliyana Izzati (2026) Rare Earth Elements Extraction Using Aqueous Deep Eutectic Solvent As A Green Leaching Agent. [Final Year Project] (Submitted)

M Khairul Amar, Aini Syamimi (2026) Performance Evaluation of Glycine as an Alternative Thermodynamic Gas Hydrate Inhibitor (THI) for Lean Gas System. [Final Year Project] (Submitted)

Md Azhari, Radzwan Najmi (2026) Recovery of Neodymium and Dysprosium from Hard Disk Drives Using Deep Eutectic Solvent. [Final Year Project] (Submitted)

Mohammad Nasir, Nur Dalila (2026) Epoxidation of RBD Palm Olein Using Urea–Hydrogen Peroxide as an Alternative to Hydrogen Peroxide: Reaction Mechanisms and Epoxide Performance. [Final Year Project] (Submitted)

Mustafa, Nur Syahirah Nazihah (2026) Effect of Tetraethylenepentamine Loading on Simultaneous CO2 Absorption and Mineralisation. [Final Year Project] (Submitted)

Mohd Khairulanuar, Aisya Afiqah Ajmal (2026) Rheological Behaviour of Wound-Healing Hydrogels Loaded with Carbon Quantum Dots. [Final Year Project] (Submitted)

Mohd Ariffin, Rina Harisha (2026) Evaluation of Antimicrobial Properties in Wound-Healing Hydrogel Using Kenaf Carbon Quantum Dot. [Final Year Project] (Submitted)

Muhammad Sofuan Fathi, Ahmad Ershad (2026) Cooling Strategy of Integrated Circuit using Microchannel. [Final Year Project] (Submitted)

Mohd Amin, Afiqah Ayuni (2026) A Dynamic Carbon Accounting Framework for Bioethanol-to-Hydrogen via Chemical Looping: Integrating Biogenic Carbon Credits with Process-Level Leakage Analysis. [Final Year Project] (Submitted)

Md Hisham, Muhammad Mustaqim (2026) Design of an AI-Assisted Greenhouse Gas (GHG) Accounting and Inventory System for Scope 1 and Scope 2 Emissions. [Final Year Project] (Submitted)

Mohd Fauzi, Nurelyna Syamimie (2026) Effect Of Tetraethylenepentamine (TEPA) Concentration On CO₂ Absorption Efficiency and Its Application in Integrated Carbon Capture and Mineralization. [Final Year Project] (Submitted)

Muin, Wellmon Welly (2026) Environmental Life Cycle Analysis of Rubber Seed Shell-Based Activated Carbon Production using Green Activation Routes. [Final Year Project] (Submitted)

Muslim, Robeahtul Idayu (2026) Effect of Reaction Conditions on Bio-Oil Production via Microwave-assisted Catalytic Cracking of Defatted Microalgae. [Final Year Project] (Submitted)

Mohd Azahari, Mohamad Haziq Imran (2026) Thermal Aging Behaviour Of NPG Diester Based Thermal Fluid For Electrical Vehicle Application. [Final Year Project] (Submitted)

Mohamad Shaiful, Nur Danisha Aliyah (2026) Assessment Of Kenaf-Based Activated Carbon For Efficient Free Fatty Acid (FFA) Adsorption In Waste Cooking Oil. [Final Year Project] (Submitted)

Mohd Kamil Hadsrim, Nurhani Hadsliza (2026) Effect Of Particle Size On Explosion Severity Of Lithium-Ion Battery Black Mass In A 20L Spherical Chamber. [Final Year Project] (Submitted)

Mohd Zaid, Nurul Azhani (2026) Inherently Safer Process Route Ranking Index (ISPRRI) for Sustainable Process Design. [Final Year Project] (Submitted)

Mohana Sundaram, Surya Prasath (2026) Development Of Carbon-Doped Tio₂ Photoanodesfor H₂ Production Via Photoelectrochemical (Pec) Water Splitting. [Final Year Project] (Submitted)

Mani Arasu, Shree Kailasshnee (2026) A Study on Volarization of Palm Oil Mil Effluent as A Sustainable Source of BioBased Corrosion Inhibitors Via Green Solvent Extraction. [Final Year Project] (Submitted)

Mok, Yong Jun (2026) Hybrid Mechanistic Data Driven Modeling of Surfactant Impacts on Biogas Production. [Final Year Project] (Submitted)

Mohd Hairul, Nurafiqah (2026) Feasibility of Gas Sensor Arrays for Volatile-Based Honey Screening. [Final Year Project] (Submitted)

Muhammad Akmal, Raffa (2026) Modelling and Simulation of Dividing Wall Column for Depropanizer. [Final Year Project] (Submitted)

Mohmad Yasin, Nur Farhanah (2026) Valorization Of Durian Seeds Through Extraction, Separation And Purification Of Durian Seed Oil Via Supercritical Fluid Extraction. [Final Year Project] (Submitted)

Mat Sahwira, Nur Aina Nazurah (2026) Formulation And Characterization Of NPG Diester-Based Thermal Fluids Enhanced With Nanoparticles For Electric Vehicle Applications. [Final Year Project] (Submitted)

N

Nurdin, Nur Syahalisah (2026) Design and Comparative Analysis of Butanal Isomer Separation Using Conventional and Dividing-Wall Distillation Columns. [Final Year Project] (Submitted)

Nordin, Aisyah Sofea (2026) Ecotoxicological Evaluation of Biochar Derived from Palm Oil Mill Effluent (POME) Using Aquatic Toxicity Bioassays. [Final Year Project] (Submitted)

Noorudin, Muhammad Azfar (2026) Influence of pH on Microbubble-Assisted CO₂ Carbonation for Calcium Carbonate Synthesis. [Final Year Project] (Submitted)

Nor Hisham, Muhammad Aidil Hafiz (2026) A Genetic Polynomial Regression Methodology for Non-Linear Data Modelling. [Final Year Project] (Submitted)

O

Omar, Muhammad Irfan Amrullah (2026) Effect of Graphene Loading on the Absorption of Halogenated Organic Solvents and Electrical Properties of Polydimethylsiloxane Composites. [Final Year Project] (Submitted)

P

Putri Aprillia, Bunga Asih (2026) Machine Learning Driven Prediction Of CO₂ Solubility Inside Brine. [Final Year Project] (Submitted)

Parameswaren, Sharwineswaren (2026) Hydrothermal Carbonization Of Biomass: Influence Of Process Conditions On Hydrochar Properties And Fuel Performance. [Final Year Project] (Submitted)

Pratama, Muhammmad Ardi (2026) Assessment Of Synergistic Bio-Oil Yield From Napier Grass And LDPE Fast Co-Pyrolysis. [Final Year Project] (Submitted)

R

Rosli, Intan Batrisya (2026) Design And Analysis Of Seawater Reverse Osmosis (Swro) Desalination Using Aquagrid By Toray. [Final Year Project] (Submitted)

Rozli, Harith Naim (2026) Bio-Coagulants for Bod Reduction In Palm Oil Mill Effluent (POME) For Safe Discharge. [Final Year Project] (Submitted)

Ravichandran, Shahindran (2026) Predictive Modelling of Ignition Sensitivity for LCO and NMC Black Mass Based on Minimum Ignition Energy (MIE) and Minimum Ignition Temperature (MIT). [Final Year Project] (Submitted)

Ramadhani Anas, Putri (2026) Statistical Analysis Of Reaction Conditions For Bio-Oil Production From Microalgae Via Catalytic Microwave Pyrolysis. [Final Year Project] (Submitted)

Rusli, Muhammad Hakim (2026) Effects of Ionic Liquids in Alkaline Water Electrolysis of Seawater. [Final Year Project] (Submitted)

Rozario, Ryaan James (2026) Development of Novel Cerium Gallate Metal–Organic Framework for Enhanced Carbon Dioxide Adsorption Synthesized via Room Temperature Vapor Assisted Conversion. [Final Year Project] (Submitted)

S

Shaharul Razi, Ilina Shafiya (2026) Co‑Cracking of Defatted Microalgae Biomass and Plastic Waste for Enhanced Bio‑Oil Production via Microwave‑Assisted Catalytic Cracking. [Final Year Project] (Submitted)

Sulaiman, Nur Iellyana Fasha (2026) Study Of Hydrodynamic Flow Distribution On Novel Manifold Microchannel Reactor Design Using 3d-Printing Fabrication Method. [Final Year Project] (Submitted)

Sofyuddin, Muhammad Akhtar (2026) Characterization Of Bioink Use For 3d Bioprinting. [Final Year Project] (Submitted)

Suhaimi, Jazrin Haikal (2026) Shaping Metal Organic Framework for Carbon Dioxide Capture. [Final Year Project] (Submitted)

Silverio Albino, Adelaide (2026) Synthesis of Carbon Aerogels Using Amine-infused Coconut Shells and Fly Ash with Poly (acrylamide-co-acrylic acid) for CO2 Capture. [Final Year Project] (Submitted)

Sallehudin, Nurlin Saliha (2026) Development of Solar - Driven Biomass - Based PVA Hydrogel for the Removal of Methylene Blue and Methyl Orange from Wastewater. [Final Year Project] (Submitted)

Shamsudin, Raudatunnur (2026) Development of Quantitative Structure-Property Model for Predicting the Autoignition Temperature of Carbon-6 Organic Solvents with Experimental Validation. [Final Year Project] (Submitted)

Sharfudin, Muhamad Aniq Najwan (2026) Effect of Synthesis Temperature on the Structural, Morphological, and Thermal Properties of UiO-66. [Final Year Project] (Submitted)

Sunny, Silvestre Ronaldo Jr (2026) Amination Of Waste Cooking Oil Using Diethanolamine For The Synthesis Of Bio-Based Polyols. [Final Year Project] (Submitted)

See, Jing Han (2026) Inherent Safety and Process Optimization for Ammonia Synthesis Loop. [Final Year Project] (Submitted)

T

Tai Zun Sitt, Pegus (2026) Performance recovery of cellulose acetate membranes for CO₂/CH₄ separation after heavy hydrocarbon contamination. [Final Year Project] (Submitted)

Tie Jia Yi, Evonne (2026) Investigation of One-Pot Microalgae Biodiesel Conversion via Supercritical CO2. [Final Year Project] (Submitted)

T Rudy, Shareen (2026) Hydrogen Production by Chemical Looping Reforming Of Ethanol-Glycerol Blend Over Modified Ceria Oxygen Carrier. [Final Year Project] (Submitted)

Teng, Shiaw Kenn (2026) Experimental Evaluation of Metal Dust Explosion Parameters and Process Hazard Assessment in EV Battery Recycling. [Final Year Project] (Submitted)

Thor, Yee Hang (2026) Effect of Solvent System on the Structural Formation and Thermal Behaviour of UiO-66. [Final Year Project] (Submitted)

Tan, Jie Wei (2026) Experimental Investigation And Data-Driven Modeling Of The Minimum Ignition Temperature Of Polylactic Acid Dust. [Final Year Project] (Submitted)

Tung, Shao Lun (2026) Dose Dependent Impacts Of Surfactants On Methane Yield And COD Removal: A Cross-Sectoral Study. [Final Year Project] (Submitted)

Teoh, Xiao Wei (2026) Battery Inner Pouch Protective Layer Analysis. [Final Year Project] (Submitted)

V

V Vejayan, Kuhaneshwary (2026) Development and Characterization of KOH-Activated Rubber Seed Shell Biochar for Lead(II) Removal from Aqueous Solution. [Final Year Project] (Submitted)

W

Wan Mazhan, Wan Muhammad Shakir (2026) Predictive Modelling of Ignition Sensitivity of Kenaf Dust Based on Minimum Ignition Energy and Temperature. [Final Year Project] (Submitted)

Wan Shukri, Syafiq Syarqawi (2026) Effects of MoS₂ Coating on Mo Mesh for CO₂ Electroreduction (CO₂ER). [Final Year Project] (Submitted)

Wan Azizi, Wan Ahmad Ameer Hanafi (2026) Valorization of Palm Fatty Acid Distillate (PFAD) for Biodiesel Production Using Sulfonated Coconut Shell Catalyst. [Final Year Project] (Submitted)

Y

Yj, Aisyah (2026) Enhanced Recovery Of Rare Earth Elements Using A Citric - Malic Acid Binary Organic Acid System. [Final Year Project] (Submitted)

Yusri, Danial Hakimi (2026) An investigation of Flow Behavior and Pressure Loss of Gas Flow in Pipe. [Final Year Project] (Submitted)

Yusmi, Muhammad Zahin Danish (2026) Identification of Process Water Loop Restriction in HP Reactor using CFD. [Final Year Project] (Submitted)

Z

Zulkiflee, Zullfakar (2026) Evaluation of the Ash Fusion Behaviour of Palm Oil Decanter Cake–Bentonite Blends for Gasification Applications. [Final Year Project] (Submitted)

Zabri, Nur Khalilah (2026) Hydrogen Production by Chemical Looping Reforming of Ethanol-Glycerol over Modified Lanthanum Oxygen Carrier. [Final Year Project] (Submitted)

Zulkifli, Qalam Arif (2026) Development of Microalgae-Enriched Probiotics with Water Kefir Fermentation and Evaluation of Yield and Viability. [Final Year Project] (Submitted)

Zuraidy, Noralya (2026) Sonodegradation of Phenylphenol in Aqueous Solution in Presence of Particulates Materials. [Final Year Project] (Submitted)

Zaidee, Muhamad Amirul Hakim (2026) Theoretical Insights Into The Stability And Activity Of REE-Ni Electrocatalysts Is Seawater Electrolysis: A Density Functional Theory Approach. [Final Year Project] (Submitted)