Items where Department / MOR is "Mechanical" and Year is 2014

AHMED GAMIL, AHMED MOHMED (2014) SIMULATION AND PERFORMANCE ANALYSIS OF A SMALL SCALE HELIOSTAT FIELD AT UNIVERSITI TEKNOLOGI PETRONAS. Masters thesis, Universiti Teknologi PETRONAS.

,, YAKUBU DAN-MALLAM (2014) INFLUENCE OF WOVEN KENAF/POLYETHYLENE TEREPHTHALATE FIBER REINFORCED POL YOXYMETHYLENE HYBRID COMPOSITE ON MECHANICAL AND PHYSICAL PROPERTIES. PhD. thesis, Universiti Teknologi PETRONAS.

., AZEEMUDDIN (2014) SIMULATION OF SOLAR CHIMNEY POWER PLANT WITH AN EXTERNAL HEAT SOURCE. Masters thesis, Universiti Teknologi PETRONAS.

AJA, OGBOO CHIKERE (2014) INVESTIGATION ON HYBRID SOLAR-FLUE GAS CHIMNEY POWER PLANT. Doctoral thesis, Universiti Teknologi PETRONAS.

AKILU, SULEIMAN (2014) NUMERICAL STUDY OF FREE CONVECTION BOUNDARY LAYER FLOW OF A NANOFLUID PAST AN ISOTHERMAL INCLINED PLATE. Masters thesis, UTP.

AMAR SINGH, JASPREET KAUR (2014) THERMAL SHRINKAGE AND YIELD STRENGTH OF GELLED WAXY CRUDE OIL. Masters thesis, UTP.

Ahmad, Muhammad Syahmi (2014) Electromagnetic Windshield Wiper: Conceptual Study and Analysis. [Final Year Project] (Unpublished)

Ahmad Sauki, Muhammad Muiz Haqimi (2014) Effects of Dolomite on Thermal Performance of Intumescent Fire Retardant Coating for Structural Steel. [Final Year Project] (Unpublished)

Alias, Muhammad Farhan (2014) Modeling and Control of Axial and Torsional Stick-Slip Oscillations in Drill String. [Final Year Project] (Unpublished)

Amir Abdullah, Adam Muhsein (2014) Experimental Study of Micro-Explosion Phenomena of Emulsified Fuel. [Final Year Project] (Unpublished)

Awang Nazarudin, Awang Muhammad Nasuha (2014) Framework of a Bow-Tie Based Quantitative Risk Assessment on an Offshore Oil and Gas Processing Unit. [Final Year Project] (Unpublished)

Azan, Nur Syafiqah (2014) Feasibility Studies and Analysis to turn Raw Sand Dust into Construction Material with The Addition of Calcium Carbonate as a Melting Catalyst. [Final Year Project] (Unpublished)

Azhar, Muhamad Hanif Muqsit (2014) Optimum Lay-Up Design Analysis of Basalt Fiber Reinforced Composite Using Finite Element Analysis (FEA). [Final Year Project] (Unpublished)

Azhar, Muhammad Afieq Zakwan (2014) Heat Transfer of Combustion Chamber Wall of a Diesel Engine. [Final Year Project] (Unpublished)

Aziz, Hisyam Juwaidi (2014) Design Support System for Pressure Vessel Design. [Final Year Project] (Unpublished)

Azmi, Muhammad Hassanei Heykal (2014) Effect of Drilling Mud Contamination on the Properties of Waxy Crude Oil. [Final Year Project] (Unpublished)

BRONTO AGUNG, ASKAR TRIWIY ANTO (2014) SURFACE CHARACTERISTICS OF STAINLESS STEEL AISI 3 I 6L AFTER LOW TEMPERATURE HYBRID THERMOCHEMICAL TREATMENT. Doctoral thesis, UTP.

Babiker, Hussam Eldin Salah Abuelnour (2014) Computational Fluid Dynamics Modeling Of Smoke Spread Due To Fire in Buildings. [Final Year Project] (Unpublished)

Bin Wahabi, Mohd Tarmizi (2014) Effects of Titanium Addition on Mechanical and Corrosion properties of 316L Stainless Steel Developed through Powder Injection Molding Process. [Final Year Project] (Unpublished)

Churn, Tey Chee (2014) Optimization of 4-Cylinder Spark Ignition Engine for Fuel Consumption and Vehicle Performance through Cylinder Deactivation and Forced Induction. [Final Year Project] (Unpublished)

DHAMIN MOKHLIF, NASSIR (2014) MODELLING OF WAX CRYSTALLIZATION IN SOLVENT DEWAXING SCRAPED SURFACE EXCHANGERS AND CHILLERS. Doctoral thesis, Universiti Teknologi PETRONAS.

Elfaki, Mohamed Abdelgadir Mohamed Ahmed (2014) Fire Safety Modeling Of Offshore Petroleum Facilities Platform. [Final Year Project] (Unpublished)

Elias, Noor Fadhilah (2014) Influence of Mengkuang Fiber Orientation on the Strength of Its Composite. [Final Year Project] (Unpublished)

Fauthan, Aziah Auluwon (2014) The Effect of Post Weld Heat Treatment (PWHT) Temperature on 316L Stainless Steel with Gas Metal Arc Welding (GMAW)/ Metal Inert Gas (MIG). [Final Year Project] (Unpublished)

GURCHRAN SINGH, HARVIN KAUR (2014) CAVENSIDH BANANA PEELAS A DRAG REDUCTION AGENT. Masters thesis, Universiti Teknologi PETRONAS.

HAGOS, FTWI YOHANESS (2014) COMBUSTION, PERFORMANCE, AND EMISSIONS CHARACTERISTICS OF SYNGASES IN A DIRECT-INJECTION SPARK-IGNITION ENGINE. Doctoral thesis, Universiti Teknologi PETRONAS.

Hanafi, Hairul Azman (2014) SMART SPRINKLER: VARIABLE WATER FLOW USING NOZZLE SIZE CONTROL TO IMPROVE UNIFORMITY. [Final Year Project] (Unpublished)

Haron, Mohamed Haziq (2014) Experimental Investigation of In-situ Oxidation of Soot. [Final Year Project] (Unpublished)

Hasbullah Halmi, Muhamad Syamim (2014) Comparative Study of Several Statistical Models in Monitoring the Piping Condition in Petroleum Process. [Final Year Project] (Unpublished)

Hoe, Wong Leh (2014) Probabilistic Heat Transfer in Variably Random Oil Shale Kerogen Deposit. [Final Year Project] (Unpublished)

ISMAEL HARROUN, MHADI ABAKER (2014) SPRAY CHARACTERISTICS AND SPRAY-WALL IMPINGEMENT OF A DIESEL-CNG DUAL FUEL JET USING THE SCHLIEREN IMAGING TECHNIQUE. Masters thesis, UTP.

Ibrahim, Azman (2014) Assessment of Coating Performance for Underground Pipeline. [Final Year Project] (Unpublished)

Ismail, Muhammad Hafiz (2014) Evaluation of Effect Of Operating Temperature To Corrosion under Insulation (CUI). [Final Year Project] (Unpublished)

Jalaluddin, Muhamad Imran (2014) CFD Simulation Of 3-D Flow Field Over Clean And Loaded Wing. [Final Year Project] (Unpublished)

Jamalluddin, Fazli (2014) Hot Corrosion Behaviour of Thermal Spray Coating. [Final Year Project] (Unpublished)

Jian, Chou Zhi (2014) Prototype Manufacturability of PDC Drill Bit Body using Sacrificial Patterns with Wax Materials and using 3D Printing Technology. [Final Year Project] (Unpublished)

John, Marco Jones (2014) Study of Ground Exchange Air Conditioning (GEAC) System Design for A Small House. [Final Year Project] (Unpublished)

KHAIRULANNUAR, IZZUDIN (2014) ELECTROCHEMICAL NOISE TECHNIQUE IN MONITORING C02 CORROSION IN HIGH PRESSURE AND HIGH TEMPERATURE ENVIRONMENT. Masters thesis, UTP.

KHAN, JAVED AKBAR (2014) FILL REMOVAL FROM HORIZONTAL WELLBORE USING FOAM IN COILED TUBING. Masters thesis, UTP.

KIONG, CHONG KIAN (2014) ANALYTICAL STUDIES ON VOLUME DETERMINATION OF LEG ULCER USING REVERSE ENGINEERING METHOD. Masters thesis, Universiti Teknologi PETRONAS.

KONDA KUKU, RAMZY ELNEEL (2014) UPDRAFT GASIFICATION OF OIL PALM FRONDS. Doctoral thesis, UTP.

Khairul Salleh, Nur Sakinah (2014) Study of a low temperature waste heat driven sorption chiller. [Final Year Project] (Unpublished)

Kumar, Arvindren (2014) Vibration Analysis of Vertical Centrifugal Pump. [Final Year Project] (Unpublished)

MD SHAHID, ABDUL MUHAIMIN (2014) A Study of Semi-Active Steering System Performance On An All-Wheel Drive Flat Chassis Vehicle. [Final Year Project] (Unpublished)

MEKONNEN GUANGUL, FISEHA (2014) ENHANCEMENT OF OIL PALM FRONDS GASIFICATION PROCESS USING PREHEATED INLET AIR. Doctoral thesis, Universiti Teknologi PETRONAS.

MOHD MOKHTAR, MUNAIBAH (2014) NUMERICAL MODELLING AND SIMULATION OF BONE DRILLING TO MINIMIZE BONE NECROSIS BY CONTROLLING HEAT GENERATIONS. Masters thesis, UTP.

MUSTAFA, ASRUL (2014) LIGNIN FILLED NATURAL RUBBER LATEX COMPOSITES AND ITS UTILIZATION IN RUBBER PRODUCTS. PhD. thesis, Universiti Teknologi PETRONAS.

Mahli, Mohd Hazman (2014) A Comprehensive Study of Convective and Radiation Heat Transfer in the Flat Plate Absorber Region of a Solar Dryer. [Final Year Project] (Unpublished)

Mazlan, Nur Nadhirah (2014) Developing Centrifugal Compressor Performance Predicting Tool For Health Monitoring. [Final Year Project] (Unpublished)

Md Nasser, Muhamad Faris Ashraf (2014) Characterization of Rag Layer Formed by Actual Crude Oil, Synthetic Microcrystalline Wax and Synthetic Macrocrystalline Wax. [Final Year Project] (Unpublished)

Misren, Muhammad Mokri (2014) Reliability, Availability and Maintainability Analysis for Main Oil Line Pump by Dominant Failure Modes. [Final Year Project] (Unpublished)

Mohamad Lawi, Muhammad Fawwaz (2014) The Structural Dynamics of Nitrided Ferritic 439 Grade Stainless Steel Plates. [Final Year Project] (Unpublished)

Mohamad Zaki, Putera Nazreen Shah (2014) Design and Simulation of SmartBall for Pipeline Inspection. [Final Year Project] (Unpublished)

Mohd Azmir, Faiqah (2014) Novel Method to Join Aluminum With Nylon. [Final Year Project] (Unpublished)

Mohd Khairuddin, Nadhira (2014) Study on Structural and Hydrodynamics of Autonomous Underwater Gliders. [Final Year Project] (Unpublished)

Mohd Nor, Syah Hafiz (2014) Development of Prediction Model For System Performance. [Final Year Project] (Unpublished)

Mohd Tamam, Mohamad Qayyum (2014) Determination of Fluid Friction Factor for Nanofluids in Pipes. [Final Year Project] (Unpublished)

Muthusamy , Kabilan (2014) Water Leakage In Universiti Teknologi Petronas (UTP) From Taps to Carbon Dioxide (CO2) Emission. [Final Year Project] (Unpublished)

NASIR RESHID, MESERET (2014) AVAILABILITY MODEL FOR A COGENERATION SYSTEM SUBJECTED TO REDUNDANCY. Doctoral thesis, Universiti Teknologi PETRONAS.

NORAN, NORAZ AL-KHAIRI (2014) HOMOGENEOUS CHARGE COMPRESSION IGNITION IN A COMPRESSED NATURAL GAS ENGINE WITH A GASOLINE PILOT. Masters thesis, UTP.

Osman, Muhammad Fikri (2014) Performance Assessment Of Sacrificial Anode Cathodic Protection Of Subsea Pipeline. [Final Year Project] (Unpublished)

Othman, Ahmad Faizal (2014) Orientation Effect On Mechanical Properties of Kenaf Reinforced Polypropylene Composite. [Final Year Project] (Unpublished)

Past Year Exam Question (2014) ECB2143 MICROPROCESSOR. [Past Year Examination Question]

Past Year Exam Question (2014) MBB 2022 MCB 3063 COMPUTER AIDED ENGINEERING. [Past Year Examination Question]

Past Year Exam Question (2014) MBB 2022 MCB 3063 COMPUTER AIDED ENGINEERING. [Past Year Examination Question]

Past Year Exam Question (2014) MBB 2083 MCB 2053 FLUID MECHANICS II. [Past Year Examination Question]

Past Year Exam Question (2014) MBB 3033 MCB 3033 HEAT TRANSFER. [Past Year Examination Question]

Past Year Exam Question (2014) MBB 3054 MANUFACTURING SYSTEM & OPERATIONS. [Past Year Examination Question]

Past Year Exam Question (2014) MBB 4123 HYBRID VEHICLES. [Past Year Examination Question]

Past Year Exam Question (2014) MBB 4213 ALTERNATIVE ENERGY. [Past Year Examination Question]

Past Year Exam Question (2014) MBB 4223 ENERGY CONVERSION AND MANAGEMENT. [Past Year Examination Question]

Past Year Exam Question (2014) MBB 4233 REFRIGERATION AND AIR-CONDITIONING. [Past Year Examination Question]

Past Year Exam Question (2014) MBB 4333 MCB 4633 RELIABILITY AND MAINTENANCE. [Past Year Examination Question]

Past Year Exam Question (2014) MBB 4413 ADVANCED ENGINEERING MATERIALS. [Past Year Examination Question]

Past Year Exam Question (2014) MBB 4413 MCB 4413 ADVANCED ENGINEERING MATERIALS NANO MATERIALS. [Past Year Examination Question]

Past Year Exam Question (2014) MBB 4423 CORROSION ENGINEERING. [Past Year Examination Question]

Past Year Exam Question (2014) MBB 4433 FAILURE ANALYSIS. [Past Year Examination Question]

Past Year Exam Question (2014) MBB 4513 FACILITIES ENGINEERING, TRANSPORTATION AND STORAGE. [Past Year Examination Question]

Past Year Exam Question (2014) MBB2083 MDB1033 ELECTRICAL POWER AND MACHINES. [Past Year Examination Question]

Past Year Exam Question (2014) MBB4223 ENERGY CONVERSION & MANAGEMENT. [Past Year Examination Question]

Past Year Exam Question (2014) MBB4433 MCB4433 FAILURE ANALYSIS AND NON DESTRUCTIVE EXAMINATION. [Past Year Examination Question]

Past Year Exam Question (2014) MCB 1053 MDB 1053 STATICS. [Past Year Examination Question]

Past Year Exam Question (2014) MCB 2013 FLUID MECHANICS I. [Past Year Examination Question]

Past Year Exam Question (2014) MCB 2013 FLUID MECHANICS I. [Past Year Examination Question]

Past Year Exam Question (2014) MCB 2023 MECHANICAL ENGINEERING THERMODYNAMICS I. [Past Year Examination Question]

Past Year Exam Question (2014) MCB 2023 MECHANICAL ENGINEERING THERMODYNAMICS I. [Past Year Examination Question]

Past Year Exam Question (2014) MCB 2034 MBB 2043 SOLID MECHANICS. [Past Year Examination Question]

Past Year Exam Question (2014) MCB 2034 MBB 2043 SOLID MECHANICS. [Past Year Examination Question]

Past Year Exam Question (2014) MCB 2043 MBB 1043 DYNAMICS. [Past Year Examination Question]

Past Year Exam Question (2014) MCB 2043 MBB 1043 DYNAMICS. [Past Year Examination Question]

Past Year Exam Question (2014) MCB 2043 MBB 1043 DYNAMICS. [Past Year Examination Question]

Past Year Exam Question (2014) MCB 2053 FLUID MECHANICS II. [Past Year Examination Question]

Past Year Exam Question (2014) MCB 2063 MECHANICAL ENGINEERING THERMODYNAMICS II. [Past Year Examination Question]

Past Year Exam Question (2014) MCB 2063 MECHANICAL ENGINEERING THERMODYNAMICS II. [Past Year Examination Question]

Past Year Exam Question (2014) MCB 2063 MECHANICAL ENGINEERING THERMODYNAMICS II. [Past Year Examination Question]

Past Year Exam Question (2014) MCB 3013 CONTROL SYSTEMS. [Past Year Examination Question]

Past Year Exam Question (2014) MCB 3013 CONTROL SYSTEMS. [Past Year Examination Question]

Past Year Exam Question (2014) MCB 3023 ENGINEERING MATERIALS. [Past Year Examination Question]

Past Year Exam Question (2014) MCB 3023 ENGINEERING MATERIALS. [Past Year Examination Question]

Past Year Exam Question (2014) MCB 3033 HEAT TRANSFER. [Past Year Examination Question]

Past Year Exam Question (2014) MCB 3043 MECHANICS OF MACHINE. [Past Year Examination Question]

Past Year Exam Question (2014) MCB 3043 MECHANICS OF MACHINES. [Past Year Examination Question]

Past Year Exam Question (2014) MCB 3073 MANUFACTURING TECHNOLOGY II. [Past Year Examination Question]

Past Year Exam Question (2014) MCB 3073 MANUFACTURING TECHNOLOGY II. [Past Year Examination Question]

Past Year Exam Question (2014) MCB 3083 MBB 3043 MECHANICAL ENGINEERING DESIGN. [Past Year Examination Question]

Past Year Exam Question (2014) MCB 3083 MBB 3043 MECHANICAL ENGINEERING DESIGN. [Past Year Examination Question]

Past Year Exam Question (2014) MCB 3092 MECHATRONICS. [Past Year Examination Question]

Past Year Exam Question (2014) MCB 3092 MECHATRONICS. [Past Year Examination Question]

Past Year Exam Question (2014) MCB 3103 MBB 4023 VIBRATION. [Past Year Examination Question]

Past Year Exam Question (2014) MCB 3103 VIBRATIONS. [Past Year Examination Question]

Past Year Exam Question (2014) MCB 4213 ENERGY CONVERSION. [Past Year Examination Question]

Past Year Exam Question (2014) MCB 4513 FLOW ASSURANCE IN PIPELINES AND FLOW-LINES. [Past Year Examination Question]

Past Year Exam Question (2014) MCB 4613 MBB 4513 FACILITIES ENGINEERING, TRANSPORTATION AND STORAGE. [Past Year Examination Question]

Past Year Exam Question (2014) MCB2053 FLUID MECHANICS II. [Past Year Examination Question]

Past Year Exam Question (2014) MCB2063 MECHANICAL ENGINEERING THERMODYNAMICS II. [Past Year Examination Question]

Past Year Exam Question (2014) MCB3013 CONTROL SYSTEMS. [Past Year Examination Question]

Past Year Exam Question (2014) MCB3023 ENGINEERING MATERIALS. [Past Year Examination Question]

Past Year Exam Question (2014) MCB3033 HEAT TRANSFER. [Past Year Examination Question]

Past Year Exam Question (2014) MCB3043 MECHANICS OF MACHINE. [Past Year Examination Question]

Past Year Exam Question (2014) MCB3063 COMPUTER AIDED ENGINEERING. [Past Year Examination Question]

Past Year Exam Question (2014) MCB3073 MANUFACTURING TECHNOLOGY II. [Past Year Examination Question]

Past Year Exam Question (2014) MCB3092 MECHATRONICS. [Past Year Examination Question]

Past Year Exam Question (2014) MCB4223 ENERGY MANAGEMENT. [Past Year Examination Question]

Past Year Exam Question (2014) MCB4233 MBB4233 REFRIGERATION AND AIR CONDITIONING. [Past Year Examination Question]

Past Year Exam Question (2014) MCB4423 CORROSION ENGINEERING. [Past Year Examination Question]

Past Year Exam Question (2014) MCB4513 FLOW ASSURANCE IN PIPELINES AND FLOW LINES. [Past Year Examination Question]

Past Year Exam Question (2014) MCB4523 SUBSEA ENGINEERING. [Past Year Examination Question]

Past Year Exam Question (2014) MCB4613 FACILITIES ENGINEERING,TRANSPORTATION AND STORAGE. [Past Year Examination Question]

Past Year Exam Question (2014) MCB4623 PLANT EQUIPMENT DESIGN. [Past Year Examination Question]

Past Year Exam Question (2014) MDB 1022 INTRODUCTION TO MATERIAL SCIENCE. [Past Year Examination Question]

Past Year Exam Question (2014) MDB 1022 INTRODUCTION TO MATERIAL SCIENCE. [Past Year Examination Question]

Past Year Exam Question (2014) MDB 1033 MCB 1033 ELECTRICAL POWER AND MACHINES. [Past Year Examination Question]

Past Year Exam Question (2014) MDB1022 INTRODUCTION TO MATERIAL SCIENCE. [Past Year Examination Question]

Past Year Exam Question (2014) MDB1053 STATICS. [Past Year Examination Question]

Past Year Exam Question (2014) VCB2063 TRANSPORTATION PLANNING AND ENGINEERING. [Past Year Examination Question]

Rajaindren, Navindran (2014) Siliconizing of Aluminium Alloys via Silica Sand Bath. [Final Year Project] (Unpublished)

Ramli, Muhammad Hamizan (2014) Siliconizing Of Thermoplastic via Silica Sand Bath. [Final Year Project] (Unpublished)

Rosni, Muhammad Syafiq (2014) Experimental Works and Analysis to Determine the Degradation of Permanent Magnet Force under Cyclic Magnetic Field. [Final Year Project] (Unpublished)

SAEID, KAKOOEI (2014) DESIGN AND FABRICATION OF A SURFACE pH SENSOR FOR A REAL TIME CORROSION MONITORING. Doctoral thesis, Universiti Teknologi PETRONAS.

SALIH AHMED, MOJAHID SIDAHMED MOHAMMED (2014) DEVELOPMENT OF A DYNAMIC SIMULATOR FOR DOUBLE-EFFECT COMMERCIAL STEAM ABSORPTION CHILLER. PhD. thesis, Universiti Teknologi PETRONAS.

SAW, CHUN LIN (2014) PERFORMANCE INVESTIGATION OF SOLAR WATER HEATER INTEGRATED WITH PCM AND PCM NANOCOMPOSITE THERMAL ENERGY STORAGE. Doctoral thesis, Universiti Teknologi PETRONAS.

SIVALINGAM, GEENEISH (2014) STUDY ON THE MANUEVERABILITY OF AN UNDERWATER GLIDER WITH APPENDAGES. [Final Year Project] (Unpublished)

SYAH LUBIS, ABDUL MUNIR HIDAYAT (2014) TRIBOLOGICAL Sl1JDY OF JATROPHA (Jatropha carcass L) OIL AS ECO-FRIENDL Y BOUNDARY LUBRICANT. Doctoral thesis, UTP.

Saari, Nurul Aimi (2014) Evaluation of Reformer Tubes Degradation after Long Term Operation. [Final Year Project] (Unpublished)

Shukri, Syahrum (2014) Stress Analysis of a Defected Gear Pair Using Finite Element Analysis (FEA). [Final Year Project] (Unpublished)

THOO, KOK KEONG (2014) EFFECT OF TUBE PASS RATIOS AND FLOW PASS CONFIGURATIONS ON THE THERMAL AND HYDRAULIC PERFORMANCE OF THE ALUMINIUM MINI-CHANNEL HEAT EXCHANGER. Masters thesis, UTP.

Teoh , Chia Yang (2014) Reverse Engineering for Measuring Skin Ulcer Size with 3D Scanning. [Final Year Project] (Unpublished)

Tze-Shyuen, Leroy Wong (2014) Computational Fluid Dynamics Study of Flow within a Double Gap Cylinder. [Final Year Project] (Unpublished)

VENKITESWARAN, VINOD KUMAR (2014) HYDRODYNAMICS OF SWIRLING FLUIDIZED BED. Doctoral thesis, UTP.

W. Zakaria, W. Nur Liyana (2014) The Effect of Enhanced Oil Recovery (EOR) Surfactant on Pipeline Corrosion in CO2 Environment. [Final Year Project] (Unpublished)

WAN ABD AZIZ, WAN AHMAD AMMAR (2014) CFD Simulation of Reactor Bed for Adsorbed Natural Gas Storage System. [Final Year Project] (Unpublished)

WASIU BABATUNDE, AYANDOTUN (2014) THE EFFECT OF CARBON DIOXIDE (C02) CONTENTNATURAL GAS ON THE PERFORMANCE CHARACTERISTICS OF A DIRECT INJECTION (DI) COMPRESSED NATURAL GAS (CNG) ENGINE. Masters thesis, UTP.

WASSAN, MAJID ALI (2014) A STUDY ON LIQUID DESICCANT SYSTEM FOR THE DEVELOPMENT OF DEHUMIDIFIER'S/REGENERATOR'S MATHEMATICAL MODEL. Masters thesis, Universiti Teknologi PETRONAS.

WASSAN, RANO KHAN (2014) SEMI-QUANTITATIVE RISK ASSESSMENT MODEL FOR ROTATING EQUIPMENT. Masters thesis, Universiti Teknologi PETRONAS.

YAU, KAR HING (2014) EXPERIMENTAL AND NUMERICAL STUDIES ON THE THERMAL CONI ACT RESISTANCE OF A FIN TUBE HEAT EXCHANGER. PhD. thesis, Universiti Teknologi PETRONAS.

Yong , Calvin Yee Zhun (2014) Laboratory Drill Rig Design for Bit Wear & Vibration Study. [Final Year Project] (Unpublished)

Yunos, Muhammad Faqrurazi (2014) Computational Fluid Dynamic (CFD) of Drying Process of Sewage Sludge. [Final Year Project] (Unpublished)

ZAINAL ABIDIN, EZRANN ZHARIF (2014) INVESTIGATION OF STARTING BEHAVIOUR OF A FREE PISTON LINEAR GENERATOR ENGINE. Masters thesis, UTP.

Zainalabidin, Muhammad Arief Fikry (2014) Waxy Crude Oil Demulsification Study. [Final Year Project] (Unpublished)

Zaini, Suraya Nabilah (2014) Development of Spread sheet Based Simulation Model for Failure Prediction of Repairable System. [Final Year Project] (Unpublished)

Zamri, Shafwan Akmal (2014) Dissertation Report of Slip-On Sprocket. [Final Year Project] (Unpublished)

Zulkefli, Luqman Hakim (2014) Design and Construction of Smartball for Oil & Gas Pipeline Inspection. [Final Year Project] (Unpublished)