Items where Department / MOR is "Mechanical" and Year is 2018

Ahmad Rahim, Farhana Aqilah (2018) Corrosion Mechanism Study on Welded Austenitic Stainless Steel. [Final Year Project]

Fikri, Afif (2018) Effect of Polylactic Acid (PLA) On Mechanical and Physical Properties of Polypropylene (PP). [Final Year Project]

Ku Aizuddin, Ku Muhammad Azeem (2018) SYNERGYSTIC EFFECTS OF WOLLASTONITE AND KAOLIN CLAY REINFORCED INTUMESCENT FIRE RETARDANT COATING FOR WOOD PROTECTION. [Final Year Project]

MOHD SAIDI, AIMI AYUNI (2018) SIMULATION STUDY OF LOW VELOCITY IMPACT ON SOLAR PHOTOVOLTAIC PANEL. [Final Year Project]

Ngai, Seak Jie (2018) Experimental Investigation of the Performance of CPC under Local Weather Condition. [Final Year Project] (Submitted)

Tan, Meng Han (2018) Development of AHP Decision Model for Facility Location Selection in Malaysia. [Final Year Project] (Submitted)

Zulkiflee, Nurul Nabilah Husna (2018) Effect of Nanoparticles Concentration on Zinc Oxide-Iron (III) Oxide Hybrid Nanofluid for Enhanced Oil Recovery. [Final Year Project]

., MOHD DANISH (2018) DISSERTATION TITLE: THERMAL AND SURFACE INTEGRITY STUDY OF AZ31C MAGNESIUM ALLOY INFLUENCED BY CRYOGENIC TURNING MACHINING PROCESS. PhD. thesis, Universiti Teknologi PETRONAS.

A. RAHMAN, NOOR A’IN (2018) FORMULATION AND ASSESSMENT OF PANI-EPOXY COATING RESISTANT TO HYDROGEN PERMEATION. Doctoral thesis, Universiti Teknologi PETRONAS.

ABD SALIM, AMIRUL (2018) DETERMINING THE UNIQUE MICRO-EXPLOSION MECHANISM OF EMULSIFIED BIODIESEL FUEL PARENT DROPLET. [Final Year Project]

ABDALLA EBRAHEEM, AMMAR FAISAL (2018) Convective Cooling Enhancement in Electronic Systems by Using Vibration. [Final Year Project]

ABDUL WAHHAB, HASANAIN ADNAN (2018) MAGNETO-HYDRODYNAMIC EFFECTS ON DIESEL/CNG BUBBLY FLOW IN A HORIZONTAL PIPE. PhD. thesis, Universiti Teknologi PETRONAS.

ADAM, IBRAHIM KHALIL (2018) COMBUSTION PERFORMANCE OF RUBBER SEED AND PALM OIL BIODIESEL FUEL BLENDS WITH ANTIOXIDANTS. PhD. thesis, Universiti Teknologi PETRONAS.

ADAMU, MUSA (2018) DEVELOPMENT OF NANOSILICA MODIFIED HIGH VOLUME FLY ASH ROLLER COMPACTED RUBBERCRETE FOR PAVEMENT APPLICATION. PhD. thesis, Universiti Teknologi PETRONAS.

ADINAN, MUHAMAD FAIZAL (2018) DEVELOPMENT AND OPTIMIZATION OF HYBRID SPACE FRAME RACE CAR CHASSIS. [Final Year Project]

AHMAD BADRUDDIN, AHMAD AJWAD (2018) EXPERIMENTAL STUDY ON THE INDUSTRIAL BRAIDED HOSE FAILURE. [Final Year Project]

AHMAD KHAIRUL, AHMAD FAIDHIARIF (2018) STUDY ON THE MECHANICAL AND PHYSICAL PROPERTIES OF VACUUM BAGGING OF GLASS FIBRE-REINFORCED EPOXY COMPOSITE. [Final Year Project]

AKILU, SULEIMAN (2018) EXPERIMENTAL INVESTIGATION OF FORCED CONVECTION HEAT TRANSFER WITH SINGLE AND HYBRID NANOFLUIDS FOR ENERGY TRANSPORT ENHANCEMENT. PhD. thesis, Universiti Teknologi PETRONAS.

ALIAS, MOHAMMAD IZZAT (2018) NUMERICAL SIMULATION OF IN-CYLINDER HEAT TRANSFER LOSSES FROM DIESEL ENGINE. [Final Year Project] (Submitted)

AROGUNDADE, ADIAT IBIRONKE (2018) CHAR-REINFORCING EFFETCS OF BAUXITE RESIDUE IN PHOSPHATEBASED INTUMESCENT COATING SYSTEM. PhD. thesis, Universiti Teknologi PETRONAS.

AURYBI, MOHAMMED ABDULNABI (2018) PERFORMANCE ENHANCEMENT OF SOLAR CHIMNEY POWER PLANT SUPPLEMENTED WITH EXTERNAL HEAT SOURCE. PhD. thesis, Universiti Teknologi PETRONAS.

AZIZI, AZRI (2018) DEVELOPMENT OF NATURAL FIBER HONEYCOMB STRUCTURE USING INJECTION MOLDING. [Final Year Project]

AZMI, MUHAMMAD MERQHA’EL (2018) EXPERIMENTAL PREDICTION OF THERMAL CONDUCTIVITY OF ETHYLENE GLYCOL SILVER BASED NANOFLUID. [Final Year Project]

Abdalla Ebraheem, Omer Faisal (2018) Application of Nanomaterials in Luminescent Solar Concentrator to Reduce Re-Absorption Loss. [Final Year Project]

Abdul Halim, Ahmad Taufiq Hakim (2018) Investigations on Suitable Configurations for Optimum Four-Bar Mechanism Balancing of Crank Rocker Engine. [Final Year Project] (Submitted)

Abdul Rahim, Kama Shafik (2018) Characterization of Sound Absorption of Acoustic Sandwich Panels. [Final Year Project]

Abdul Rahim, Muhamad Azrin Syaqir (2018) Corrosion Investigation On Dissimilar Friction Stir Welded Plates. [Final Year Project]

Abdul Razak, Azrie (2018) Analysis on Resin Starvation Issue in Carbon Fibre on J-Nose Panel. [Final Year Project] (Submitted)

Abdull Kadir, Nor Amirah (2018) Use of Analytic Hierarchy Process (AHP) For Selection of Corrosion under Insulation (CUI) Critical Inspection Locations. [Final Year Project]

Afrooz, Iman Eslami (2018) A New Improved Gas Distributor Plate with Enhancing Properties for Hydrodynamics of Bubbling Fluidized Bed Gasifier. Doctoral thesis, Universiti Teknologi PETRONAS.

Ahmad, Lina Kamilia (2018) Enhancement of Corrosion Resistance of Carbon Steel Using Gas Nitriding Technology. [Final Year Project] (Submitted)

Ahmad Al-Husna, Sabrina Ilmuna (2018) Active Collision Avoidance for Human – KUKA Robot Collaboration driven by Ultrasonic Sensor HC-SR04. [Final Year Project] (Submitted)

Ahmad Fauzi, Muhammad Fikri (2018) Enhancement the Life Time of Knife Made of Stainless Steel. [Final Year Project] (Submitted)

Ahmad Zaini, Nur Hamizah (2018) Transient Analysis of Force Convective Solar Air Heater. [Final Year Project]

Ahmad Zukri, Muhammad Amir (2018) Simulation of Blood Flow in Coronary Artery. [Final Year Project]

Ali, Nurhafeezah (2018) Finite Element Stress Analysis of Basalt/Epoxy and Carbon/Epoxy Composite Laminate with Varying Hole Configuration. [Final Year Project] (Submitted)

Amiruddin, Ahmad Yusuf (2018) CFD Investigation of General Electric Gas Turbine Wash Nozzle. [Final Year Project] (Submitted)

Ariffin, Nazura (2018) Industrial Gas Turbine Emission Diagnostic using Artificial Neural Network Regression. [Final Year Project]

Arsad, Naidatul Zamrizam (2018) Experiment on New Configuration of Hybrid Offshore T-junction to Remove Liquid Carryover. [Final Year Project]

Azami, Adam Hazman (2018) Evaluation of Effective Current Output for Sacrificial Anodes at Various Sea Water Depth. [Final Year Project] (Submitted)

Azhari, Megat Ahmad ‘Izzuddin Putera (2018) Investigate the Application of Statistical Technique in Condition-Based Maintenance. [Final Year Project]

Azhari, Nurul Nabilah (2018) Simulation Study on Stress Analysis of Pipe Supported Round Bar PEEK due to Heavy Load. [Final Year Project] (Submitted)

Azmi, Muhammad Adib Aiman (2018) Tensile Properties Study on AZ91D Magnesium Alloy through Gas Nitriding. [Final Year Project]

Aznan, Muhammad Hakeem (2018) Effect of Nanoparticles Concentration on Rheological Behavior of Silica-Fe3O4 Hybrid Nanofluid. [Final Year Project]

BURHANI, NURUL RAWAIDA AIN (2018) TEMPERATURE VARIATION IN APPLICATION OF ARTIFICIAL NEURAL NETWORK FOR PREDICTION OF CORROSION RATE UNDER INSULATION. PhD. thesis, Universiti Teknologi PETRONAS.

CHAN, GEORGE WEI XIANG (2018) DEVELOP OF KNOWLEDGE-BASED SYSTEM (KBS) TO MANAGE CORROSION UNDER INSULATION (CUI). [Final Year Project] (Submitted)

CHELLIAH, EDWIN RAKESH (2018) PERFORMANCE INVESTIGATION OF A THERMOELECTRIC COOLING SYSTEM FOR BUILDINGS. [Final Year Project] (Submitted)

CHOU, CHOONG YOU (2018) TECHNO-ECONOMIC ANALYSIS OF SOLAR FLAT-PLATE COLLECTOR WORKING WITH NANOFLUID. [Final Year Project]

CHOU, CHOONG YOU (2018) TECHNO-ECONOMIC ANALYSIS OF SOLAR FLAT-PLATE COLLECTOR WORKING WITH NANOFLUID. [Final Year Project] (Submitted)

CHOY, JAN FUNG (2018) CAPACITY AND COP ANALYSIS OF DOUBLE EFFECT STEAM ABSORPTION CHILLERS USING ZERO ORDER MODEL. [Final Year Project]

Chia , Calvin Sze Ming (2018) Performance and Operational Strategies Evaluation for Electric Chillers at UTP GDC Plant. [Final Year Project] (Submitted)

Chu, Kai Jing (2018) PERFORMANCE INVESTIGATION OF AN ELECTRO ADSORPTION CHILLER. [Final Year Project]

Chua, Daniel Chong Jing (2018) Plasma Engine for Aircraft. [Final Year Project]

DAVE, NAVIN (2018) HEAT TRANSFER ENHANCEMENT IN A DOUBLE PIPE GEOTHERMAL WELL. [Final Year Project] (Submitted)

EMAMIAN, SEYED SATTAR (2018) SURFACE ENHANCEMENT AND TOOL LIFE INVESTIGATIONS OF FRICTION STIR WELDING TOOL. PhD. thesis, Universiti Teknologi PETRONAS.

Francis Xavier, Jeffry Christopher (2018) Investigation of Thermosiphoning Operation in Compound Parabolic Concentrating Solar Collector Integrated With Evacuated Flow Through Receiver. [Final Year Project]

HARIS, FARHANA (2018) STUDY ON THE INTERFACE REACTION LAYER OF DIFFUSION BONDED SIALON AND DUPLEX STAINLESS STEEL. Masters thesis, Universiti Teknologi PETRONAS.

HASIMY, MUHAMMAD HADZIM (2018) PROCESSING AND CHARACTERISATION OF RECYCLED PP/PET MICROFIBRILLAR COMPOSITES. [Final Year Project]

HASSAN, SALAH ELDIN MOHAMMED ELFAKKI (2018) Development, Performance and Emission Assessment of a Single-cylinder Air-cooled Gasoline Crank-Rocker Engine. PhD. thesis, Universiti Teknologi PETRONAS.

Hasbullah, Nurhamizah (2018) Development of Probabilistic Life Cycle Cost Model for Electric Chillers. [Final Year Project]

JALALUDIN, MOHD AMIR IZZAT (2018) Computational Fluid Dynamics (CFD) Simulation of Transitioning Slug Flow to Laminar Flow in Horizontal Pipeline. [Final Year Project] (Submitted)

Jalaluddin, Izzat Imran (2018) Buckling Behaviour analysis of composite pipes under pure axial compressive loading using ANSYS Software. [Final Year Project] (Submitted)

Johari, Norjasmine Julyana (2018) Thermal Performance of Basalt Fibre Reinforced Polydimethylsiloxane Epoxy-based Intumescent Fire Retardant Coating. [Final Year Project] (Submitted)

K. Balakrshnan, Vikneshwaran (2018) Fabrication of Compliant EP-FG Composite Automobile Shell Structure using Compression Moulding Process. [Final Year Project]

KA HEE, CHOONG (2018) INVESTIGATION ON AUTOMATED SYSTEM DESIGNS FOR ADHESIVE BONDING OPERATION. [Final Year Project]

KAKA, SHUAIB (2018) FUZZY LOGIC-BASED QUANTITATIVE RISK ASSESSMENT MODEL FOR HEALTH SAFETY AND ENVIRONMENT IN OIL AND GAS INDUSTRY. Masters thesis, Universiti Teknologi PETRONAS.

KAUR, EESHA (2018) THE CHARACTERISTICS OF WATER-IN-BIODIESEL EMULSIONS PRODUCED USING ULTRASONIC HOMOGENIZER. [Final Year Project] (Submitted)

KHAIRULANWAR, MOHAMAD KAMAL FIKRIN (2018) THE INFLUENCE OF ZINC OXIDE NANOPARTICLE ON THE MECHANICAL PROPERTIES OF GRAPHENE OXIDE EPOXY COMPOSITE COATING SYSTEM FOR PIPELINE APPLICATION. [Final Year Project]

KHAN, JAVED AKBAR (2018) EXPERIMENTAL AND MATHEMATICAL INVESTIGATION ON THE SEPARATION PREDICTION OF OIL/WATER EMULSIONS FLOODED WITH ALKALI-SURFACTANT-POLYMER. PhD. thesis, Universiti Teknologi PETRONAS.

KHOR, JIE SHENG (2018) PERFORMANCE OF WASTE RESIDUAL PELLETIZED BIOMASS SOLID FUEL FROM MIXTURE OF COW DUNG AND PALM OIL FIBRE. [Final Year Project] (Submitted)

KU ARIFFIN, KU MUHAMMAD FAEZ (2018) PERFORMANCE ANALYSIS OF GROOVED HYDRODYNAMIC JOURNAL BEARING WITH TEXTURE AND SLIP SURFACE. Masters thesis, Universiti Teknologi PETRONAS.

Kamaruddin, Siti Maryam (2018) CFD Simulation of Two-Phase Flow in Rectangular Conduit. [Final Year Project] (Submitted)

Kamarulbakhrin, Satria Kamarin Azrai (2018) CFD Simulation of Air Flow Motion for FPLG Gas Exchange Process. [Final Year Project]

Kathirasan, Yuktesvaranath (2018) Risk Analysis for Piping Systems Subject to Corrosion Under Insulation (CUI) Using Delphi Method. [Final Year Project]

Koo , Victor Zhao En (2018) CFD Simulation of Building Double Skin Façade on Building’s Thermal Comfort and Energy Saving. [Final Year Project] (Submitted)

Kumannan, Sukendran (2018) Feasibility Study on Gasification of Coconut Palm Fronds. [Final Year Project]

Kunarajah, Kavinash Kumar (2018) Investigation on the Effects of Vertical Camera Placement on the Accuracy of Optical Plume Velocimetry. [Final Year Project]

LI, CHUN PING (2018) Optical Modelling and Analysis of a Non-Imaging Stationary Compound Parabolic Concentrator using Ray Tracing Technique. [Final Year Project]

Lam , Zang Liang (2018) Mechanical Properties and Performance Evaluation of High Density Polyethylene (HDPE)/Glass Fiber Composite. [Final Year Project] (Submitted)

Lee, Agnes Wan Wan (2018) Root Cause Analysis on Failure of Thermowell. [Final Year Project]

Leong, Jenifer Wei Yun (2018) Degradation of Plastic & Elastomers in Palm Oil based Biofuel. [Final Year Project] (Submitted)

Lim, Gao Yih (2018) Application of Six Sigma Technique in Improving UTP Fabrication and Manufacturing Laboratory Performances. [Final Year Project] (Submitted)

MACHMUDAH, AFFIANI (2018) META-HEURISTIC AND GEOMETRICAL BASED MOTION PLANNING OF INDUSTRIAL MANIPULATOR. PhD. thesis, Universiti Teknologi PETRONAS.

MAHGOUB, BAHAADDEIN KAMAL MOHAMED (2018) INVESTIGATION OF ZERO CARBON DIOXIDE SYNGAS-BIODIESEL BLENDS FOR DUAL FUELING OPERATION IN A CI ENGINE. PhD. thesis, Universiti Teknologi PETRONAS.

MD NADZIR, MUHAMMAD FAISAL (2018) DEVELOPMENT OF CORRUGATED SHELL STRUCTURE AND STUDY OF ITS EFFECT ON THERMOSET COMPOSITE SHEET. [Final Year Project] (Submitted)

MOHAMAD NASRI, MOHAMAD NAAIM (2018) EFFECT OF SAND CONTAMINANT IN CRUDE OIL PIPELINE. [Final Year Project]

MOHAMAD SAUPEE, NURUL SYAZWANEE (2018) NUMERICAL SIMULATION STUDY LAMINAR MIXED CONVECTION NANOFLUIDS FLOW FORWARD-FACING STEP PLACED WITH BAFFLE. [Final Year Project] (Submitted)

MOHAMMAD , SYAFIQ AZYAN (2018) INVESTIGATION ON DRAG REDUCTION OF UNDERWATER GLIDER BY MANIPULATING THE ANGLE OG HEADING. [Final Year Project]

MOHD AMIR NOR RABI, MOHD AMIRUL AFIQ (2018) INVESTIGATION OF DIAMOND LIKE CARBON COATING FOR FRICTION STIR WELDING TOOL. [Final Year Project]

MOHD AZLAN, MOHAMAD NAZRIN SHAH (2018) RESIDUAL STRENGTH ANALYSIS OF SINGLE CIRCUMFERENTIAL CORROSION GROOVE SUBJECTED TO INTERNAL PRESSURE AND LONGITUDINAL COMPRESSIVE STRESS. [Final Year Project] (Submitted)

MOHD DAUD, MOHAMMAD SYAHMIE (2018) COMPUTATIONAL FLUID DYNAMICS (CFD) INVESTIGATION ON THERMAL PERFOMANCE OF HEAT SINKS IN ELECTRONIC EQUIPMENT. [Final Year Project]

MOHD JAMIL, HASIFI HAZIM (2018) EVALUATION OF COATING PERFORMANCE FOR OFFSHORE STRUCTURES IN A HARSH ENVIRONMENT. [Final Year Project]

MOHD NOOR, SITI NURSYUKRIAH (2018) CHARACTERIZATION OF NANOCERAMIC COATING PROPERTIES. [Final Year Project] (Submitted)

MOHD YAZIT, LUKMAN NULHAKIM (2018) HOLE ANALYSIS OF CARBON FIBER REINFORCED POLYMER (CFRP) LAMINATES STACK DRILLING IN AN AIRCRAFT APPLICATION. [Final Year Project]

MUSHTAQ, SHAHRYAR (2018) Design, development and experimental validation of dual output stator-less motor. Masters thesis, Universiti Teknologi PETRONAS.

Madhavan, Prasad (2018) Investigation of the Performance of Thermal Energy Storage (TES) with Embedded Phase Change Materials (PCM). [Final Year Project]

Marzuki, Mohd Hakimi (2018) Dewaxing of Oil Pipelines by Applied Magnetic Field. [Final Year Project] (Submitted)

Mat Daud, Ahmad Taqiyuddin (2018) Analysis of a Free Piston Linear Generation System. [Final Year Project]

Medhi, Nur Syafiqah (2018) Numerical Investigation of Electronic Cooling with Phase Change Material. [Final Year Project] (Submitted)

Mohamad Azalan, Nur Haaziq (2018) DESIGN AND DEVELOPMENT OF AN OPTICAL GONIOMETER. [Final Year Project]

Mohamed Razak, Mohd Hairie Azam (2018) Flow Simulation Study For Rotating Cage Equipment. [Final Year Project]

Mohamed Zuhri, Ahmad Syazni Afham (2018) KUKA ROBOT LANGUAGE: MOTION CONTROL OF KUKA ROBOT. [Final Year Project] (Submitted)

Mohd Asri, Amir Syafiq (2018) Simulation and Analysis of Welding Distortion of T- Joint Using Ansys”. [Final Year Project]

Mohd Badzli Shah, Mohamad Hafidz (2018) Design and Performance Improvement of Pico Hydro Turbine. [Final Year Project] (Submitted)

Mohd Husni, Muhammad Amir Azri (2018) EFFECT OF MECHANICAL PROPERTIES ON SURFACE TREATMENT TO CARBON FIBER WOUND HDPE COMPOSITE PIPE (CFWHCP). [Final Year Project]

Mohd Khairuddin, Muhammad Amirul Izzwan (2018) Effect of Single Corroded Defect Geometry on the Burst Capacity of Grooved Corroded Pipeline Subjected to Internal Pressure. [Final Year Project] (Submitted)

Mohd Rizal, Fatin Nur Jeehan Rizal (2018) ENHANCEMENT OF OVEN-VACUUM BAGGING PROCESS FOR MANUFACTURING SANDWICH PANELS. [Final Year Project] (Submitted)

Muhammad Amin, Mirza Muqri (2018) Effect of Various Fillers on Intumescent Fire Retardant Coating and Their Influence on Fire Resistance. [Final Year Project] (Submitted)

Muniandy, Divyeruthra (2018) AUTOMATED PIPELINE DIAGNOSTICS USING IMAGE PROCESSING AND INTELLIGENT SYSTEM. [Final Year Project]

Mustafa Kamal, Amar Safwan (2018) Influence of Rice Husk Ash Particles on Microstructure and Mechanical Properties of AA7075-T6 Aluminium Matrix Composites Produced using Friction Stir Processing. [Final Year Project] (Submitted)

NIK ABDUL AZIZ, NIK AMIRUDDIN (2018) NUMERICAL INVESTIGATION ON THE PERFORMANCE OF THE PHOTO-THERMOELECTRIC AIR DUCT FOR BUILDINGS NIK. [Final Year Project]

NORIDAN, NOR AMEYZAH (2018) OPTIMIZATION OF AGING PROCESS ON CLOSED-CELL ALUMINIUM FOAM USING BOX BEHNKEN DESIGN. [Final Year Project] (Submitted)

Nawawi, Muhammad Farhan (2018) Finite Element Analysis of Rock-Cutter Interaction in Drilling Operation using Single Cutter PDC Bit. [Final Year Project]

Noor Azman, Muhammad Aiman Faris (2018) Prediction of Evaporator Performance of Double Effect Steam Absorption Chiller. [Final Year Project]

Noorazli, Nur Aina (2018) Topology Optimization Analysis and Development of a Bracket Using Simulation and Additive Manufacturing (AM) Technology. [Final Year Project] (Submitted)

ONG, ZI CONG (2018) MODELLING AND ANALYSIS OF POWERTRAIN PERFORMANCE OF A SINGLE-SEATED RACE CAR. [Final Year Project]

OTHMAN, MUHAMMAD FAISAL (2018) GREY RELATIONAL ANALYSIS FOR PRIORITIZING INSPECTION OF PIPING SYSTEM SUBJECT TO CORROSION UNDER INSULATION. [Final Year Project]

Omar, Muhammad Ikmal (2018) Corrosion of Copper-coupled Steel in Open Recirculating Cooling Water System. [Final Year Project] (Submitted)

Omar, Noraimi (2018) Antifriction Bearing Malfunction Detection and Diagnostics using Hybrid Approach. [Final Year Project]

Omar, Noraimi (2018) Antifriction Bearing Malfunction Detection and Diagnostics using Hybrid Approach. [Final Year Project] (Submitted)

Pian, Raffaella Cheau Mei (2018) Mechanical Properties and Performance Evaluation of Polypropylene/Betel Nut Husk Composite. [Final Year Project]

QAYYUM, JUNAID AHMAD (2018) ENHANCEMENT STUDY OF POLYMER RAPID TOOLING FOR METAL INJECTION MOLDING. Masters thesis, Universiti Teknologi PETRONAS.

RAHMAD, MUHAMMAD AIMAN HAKIM (2018) The Influence of Zinc Oxide Nano Particle on the Adhesion and Abrasion Properties of Graphene Oxide/Epoxy Composite System for Pipeline Application. [Final Year Project]

RAM NAIR, SAYSHAR (2018) COMPUTATIONAL FLUID DYNAMICS INVESTIGATION ON THE USE OF PHASE CHANGE MATERIAL (PCM) HEAT EXCHANGER TO PROVIDE COOLING FOR BUILDING THERMAL COMFORT. [Final Year Project]

RIDZUAN, ANAS FADHIL (2018) FATIGUE ANALYSIS OF FREE STANDING DRILLING RISER DUE TO VORTEX INDUCED VIBRATION UNDER EXTREME WEATHER CONDITIONS. [Final Year Project] (Submitted)

Ramlee, Ezwani (2018) Enhancing the Lifetime and Corrosion Resistance of Gear Made of Carbon Steel. [Final Year Project] (Submitted)

Rein Myo, Thu (2018) Control of Rotary Drill Bit to Reduce Vibration Using Input Shaper. [Final Year Project]

Rosley, Luqman Nur Hakim (2018) Performance Analysis of Castable FDM Filaments for Rapid Casting Applications. [Final Year Project] (Submitted)

Rumaizi, Shahril Ikhwan (2018) Effect of Initial Surface Finishing Roughness on Corrosion Behaviour of AISI 1050 Carbon Steel in CO2 Environment. [Final Year Project]

SABIR, OSAMA FUAD AKASHA (2018) Cell by Cell Artificial Neural Networks Approach for Modelling Laminar Flow in Two-dimensional Domain. PhD. thesis, Universiti Teknologi PETRONAS.

SAID ALI, BASIL HASSAN (2018) DEVELOPMENT OF AN OPTIMUM SOLAR POWER TOWER MODEL USING EVACUATED TUBE RECEIVER. PhD. thesis, Universiti Teknologi PETRONAS.

SHU LIANG, HO (2018) Performance Analysis of 150cc Single Cylinder Engine with Electronic Fuel Injection System. [Final Year Project] (Submitted)

SHUKRI, FADHIL AIZAD (2018) CFD STUDY ON EFFECTS OF DIFFERENT WINDOW FILMS ON THE COOLING RATE OF ACADEMIC BUILDINGS IN UNIVERSITY TECHNOLOGY PETRONAS (UTP). [Final Year Project] (Submitted)

SIVBALATHAVAN, YHAGUNAN (2018) EFFECT OF. [Final Year Project]

Sennjiv , Allagu (2018) Analysis of Fixed Cutter Bit for Directional Drilling in Hard Formation. [Final Year Project] (Submitted)

Shanmugam, Kashinath (2018) A Study of Physical and Mechanical Properties of Powder Injection Molded Copper-Tungsten Alloys. [Final Year Project]

Supparmaniam, Veenoshini (2018) Strength Analysis of Basalt Epoxy Composite Laminates with Multiple Open Holes. [Final Year Project]

Suppiah, Naavin (2018) Residual Strength Analysis of Diagonally Aligned Interacting Corrosion Defects Subjected to Internal Pressure and Longitudinal Compressive Stress. [Final Year Project]

TAN, CHIN ZHI (2018) CFD MODELING ON STABILITY OF LIQUID CARBON DIOXIDE IN DEEP OCEAN. [Final Year Project] (Submitted)

TG. ALI, TENGKU MOHAMAD AMIRUL (2018) Effect of Nitriding Temperature and Nitriding Time On Magnesium, MgAZ91D Alloy. [Final Year Project] (Submitted)

TRAN, NGO NGUYET (2018) NUMERICAL SIMULATIONS OF EROSION IN 90-DEGREE ELBOW DUE TO FINE PARTICLES TRANSPORTED IN ANNULAR FLOW REGIME. Masters thesis, Universiti Teknologi PETRONAS.

Tengku Bazli, Tengku Muhamad Nazmi (2018) Experimental Analyses on T-junction Geometry in Two Phase Flow. [Final Year Project] (Submitted)

VICTOR GORGE, KENNIE RAJ (2018) DEVELOPMENT OF DISCRETE EVENT MODEL FOR CONTINOUS MANUFACTURING PROCESS OF ETHANOLAMINES. [Final Year Project] (Submitted)

WONG , HAO XIANG (2018) INVESTIGATION ON THE EFFECT OF ROLL MOTION ON MANEUVERABILITY OF UNDERWATER GLIDER USING WATER BLADDERS. [Final Year Project] (Submitted)

Wahid, Abdul Hakim (2018) Leak Detection in Liquid Pipeline using Flow Monitoring Method. [Final Year Project] (Submitted)

Wan Alim, Wan Muhamad Izzat (2018) A Study of Corrosion Inhibitor Performance on Coating Pinhole Defects. [Final Year Project]

Wan Azaha, Wan Nor Suhaina (2018) Effect of Nitriding Temperature and Time with Gas Mixture of 95% Nitrogen and 5% Hydrogen on MgAZ91D Alloy. [Final Year Project] (Submitted)

Wan Mohd Nasir, Wan Mohamad Hafiz (2018) Cathodic Disbondment of Nano Ceramic Coating. [Final Year Project] (Submitted)

YAHYA, MUHAMMAD IKHWAN (2018) BURST CAPACITY ANALYSIS OF MULTIPLE CIRCUMFERENTIALLY INTERACTING CORROSION DEFECTS SUBJECTED TO INTERNAL PRESSURE AND LONGITUDINAL COMPRESSIVE STRESS. [Final Year Project] (Submitted)

YAR, MUHAMMAD ASFAND (2018) Assessing the Impact of Failure Factor In Term of Preventive Maintenance Planning Adopting Witness Simulation Software. [Final Year Project] (Submitted)

YII, HEE LING (2018) Development of Framework for Proper Selection of Root Cause Analysis (RCA) Tools for Incidents in Oil and Gas Industry. [Final Year Project] (Submitted)

Yew, Weng Keong (2018) Nonlinear Transient Finite Element Analysis of Dog Bone Specimen. [Final Year Project] (Submitted)

Yusup, Nasrullah (2018) Characteristics Study and Development of Solid Fuel Briquette From Sarawak Coal. [Final Year Project]

ZAHIDAH, KHAIRINA AZMI (2018) Development of Sodium Diethyldithiocarbamate-loaded Halloysite Nanotube in Epoxy as A Smart Anticorrosion Coating. Masters thesis, Universiti Teknologi PETRONAS.

ZINN LYNN, THAW (2018) EXPERIMENTAL INVESTIGATION ON EFFECT OF AG-WATER NANOFLUID ON THE THERMAL PERFORMANCE OF HEAT PIPE. [Final Year Project]

Zainal, Mohd Hafiz (2018) Compatibility Study and Corrosion Behaviour of Storage Materials in Different Blends of Palm Methyl Ester Biodiesel. [Final Year Project]

Zainul Asri, Muhammad Amir Syafiq (2018) Risk Analysis for Piping Systems Subject to Vibration Using Delphi Method. [Final Year Project]