Items where Department / MOR is "Mechanical" and Year is 2020

Group by: Creators | Item Type | No Grouping
Jump to: | A | B | C | D | F | G | H | I | J | K | L | M | N | R | S | T | W | Y | Z
Number of items: 93.

AMARPALL SINGH, AJIT SINGH (2020) THE EFFECT OF WEIGHT PERCENTAGES OF CARBONYL IRON PARTICLES (CIP) ON THE PHYSICOCHEMICAL CHARACTERISTICS OF EPOXIDIZED NATURAL RUBBER-50 (ENR-50) BASED MAGNETORHEOLOGICAL ELASTOMERS (MRE). [Final Year Project] (Submitted)

MUHAMMAD NUR AZLEE STANLEY, MUHAMMAD NUR AFIF DANIAL (2020) COMPUTATIONAL FLUID DYNAMICS (CFD) SIMULATION OF BYPASS FRACTION FOR BYPASS PIG IN MULTIPHASE FLOW. [Final Year Project] (Submitted)

Mohamad Redzuan, Intan Fazreenna (2020) Predicting Tensile Properties of Lalang Grass Fiber (LGF) Reinforced Polypropylene (PP) using Mathematical Modelling. [Final Year Project] (Submitted)

Mohd Khalid, Muhammad Azrai (2020) GREEN CORROSION INHIBITOR ( THYME OIL) LOADED HNT FOR CORROSION PROTECTION OF CARBON STEEL. [Final Year Project] (Submitted)

Razuki, Muhamad Afham (2020) Hydroxyapatite and Titania (HA-TiO2) powder mixed EDM for surface modification. [Final Year Project] (Submitted)

A

AB RAHMAN, AIDIL (2020) The Effect of Welding Parameters to Mechanical and Physical Properties during Resistance Welding of Titanium Alloys. [Final Year Project] (Submitted)

AHMAD SHAKARIA, AHMAD FARIS ASLAM (2020) DEVELOPMENT OF AN ELECTROSTATIC DISCHARGE (ESD) EVENT DETECTOR SYSTEM FOR AN ELECTRONIC MANUFACTURING PRODUCTION LINE. [Final Year Project] (Submitted)

AKHTER, JAVED (2020) THEORETICAL AND EXPERIMENTAL EVALUATION OF A MODIFIED COMPOUND PARABOLIC CONCENTRATING SOLAR COLLECTOR USING OIL-BASED NANOFLUIDS. PhD. thesis, Universiti Teknologi PETRONAS.

ALI, SADAQAT (2020) DEVELOPMENT AND CHARACTERIZATION OF MODIFIED 316L STAINLESS STEEL ALLOY FOR BIOMEDICAL APPLICATIONS USING POWDER METALLURGY. PhD. thesis, Universiti Teknologi PETRONAS.

AZIZI, MUHAMMAD FAKHRU RAZI (2020) Finite Element Analysis of Disbondment in Thermoplastics Composite Pipe (TCP) Fitness for Surface (FFS). [Final Year Project] (Submitted)

Ab. Aziz, Muhammad Yusri Hafiz (2020) Electrochemical Impedance Spectroscopy Evaluation of Non-Metallic Pipe (NMP) Degradation in CO2 Environment. [Final Year Project] (Submitted)

Abdul Aziz, Aisar Amiree (2020) Development of an empirical model for energy usage and machine maintainability: palm oil pressing. [Final Year Project] (Submitted)

Abdul Basith, Mohammad Sobir (2020) Effects on Number of Supports on Vibration and Stress Distribution for Piping System. [Final Year Project] (Submitted)

Abdull Hadi, Mohd Ameerul Haziq (2020) To Study the Effect of Waste Glass Powder and Zirconium Phosphate on the Properties of Intumescent Fire-Retardant Coating. [Final Year Project] (Submitted)

Abu Bakar, Abu Amirul Shafiq (2020) Study on the Mechanical Behavior of Al - 7075 after Heat Treatment Process in Biomedical Field. [Final Year Project] (Submitted)

Abul Kalam Azad, Nursyhira Azad (2020) Investigation of Tribological Properties of Hybrid HDPE Polymer Nano Composites. [Final Year Project] (Submitted)

Americo, Paulo Faife Inocencio (2020) Numerical Investigation of PDC Cutter – Rock Interaction using LS-DYNA and Design of Experiment. [Final Year Project] (Submitted)

Armando Macuacua, Florivaldo Daniel (2020) CFD Optimization Of Building Glazed Cladding In Order To Achieve Thermal Comfort And Achieve Energy Saving. [Final Year Project] (Submitted)

Azmin, Muhammad Danial (2020) CFD ANALYSIS OF MODIFIED IMPELLER FOR PAINT MIXER. [Final Year Project] (Submitted)

B

BAHARUDDIN, AHMAD AIDIL AIZAT (2020) PERFORMANCE OPTIMIZATION OF A ROOF TOP TRANSVERSE AXIS WIND TURBINE. [Final Year Project] (Submitted)

BEHESHTI, MOHAMMADALI (2020) The electrochemical carbon dioxide conversion to Synthesis Gas (SYNGAS) by ZincNickel bimetallic electrocatalysts. PhD. thesis, Universiti Teknologi PETRONAS.

C

Chandrashakeran, Dharmesh Kumar (2020) The Influence of Oxidizing Parameters on the Formation of Oxide Layer as a Precursor for the Fabrication of Carbon Fiber-Steel Laminate. [Final Year Project] (Submitted)

Chen , Tien Hao (2020) COMPUTATIONAL SIMULATION OF ENGINE COOLING SYSTEM PERFORMANCE OF A COMMERCIAL CAR. [Final Year Project] (Submitted)

Chuok, Gan Yee (2020) The Effect of Welding Parameters Between Titanium Alloy and Stainless Steel with Interlayer of Aluminium Alloy in Resistance Spot Welding. [Final Year Project] (Submitted)

D

Davis, Michael Tristan (2020) Experimental Investigation on Wire Rope Isolators. [Final Year Project] (Submitted)

F

FUA-NIZAN, ROSDAYANTI (2020) THE STUDY OF CUSTOM-FITTED FEMORAL COMPONENT KNEE IMPLANT FOR HIGH FLEXION. Masters thesis, Universiti Teknologi PETRONAS.

G

Gobalu, G.Kabhilan (2020) Molybdenum Disulphide/Cellulose Acetate Nanofiber Composite on Screen Printed Electrodes for Determining Cardiac Disease by Electrochemical Impedance Spectroscopy. [Final Year Project] (Submitted)

H

HAMZA, JASEER ERADEN (2020) VALUATION AND OPTIMIZATION OF CONICAL AXIAL CONCURRENT HYDROCYCLONE SEPARATOR FOR DEOILING APPLICATIONS. PhD. thesis, Universiti Teknologi PETRONAS.

HARIS, MUHAMMAD (2020) STUDY ON CALCINATION OF HALLOYSITE NANOTUBE (HNT)TO ENHANCE EFFICIENCY OF 2-MERCAPTOBENZOXAZOLE (MBO) LOADED CALCINED HNT EPOXY AS A SMART ANTICORROSIVE COATING FOR CARBON STEEL. Masters thesis, Universiti Teknologi PETRONAS.

HASHMI, MUHAMMAD BAQIR (2020) Transient Modeling and Simulation of Variable Geometry Industrial Gas Turbines. Masters thesis, Universiti Teknologi PETRONAS.

HE , DONGHAI (2020) HYDRODYNAMIC STUDY OF HEAVE COMPENSATED LANDING SYSTEM. Masters thesis, Universiti Teknologi PETRONAS.

HUSSEIN, ALAA RAAD (2020) FORMULATION OF RESPONSIVE SIC COMPOSITE BASED SELECTIVE ELECTROMAGNETIC PROPAGATION FOR GHZ APPLICATION. PhD. thesis, Universiti Teknologi PETRONAS.

Hassan, Muhamad Shukri (2020) Integration of RAM Model and DES Method in Assessing Plant Utilization. [Final Year Project] (Submitted)

Hassan, Muhammad Haziq Hassani (2020) Modelling and Motion Analysis of a Cylindrical Steel-Rod under Very Close Distance between Electromagnets with Alternating Polarities. [Final Year Project] (Submitted)

Hazarudin, Nurul ‘Awatif Hanani (2020) Effects of Liquid-Gas Fraction on Vibrational Behaviour of Piping System. [Final Year Project] (Submitted)

I

INAYAT, MUDDASSER (2020) CATALYTIC CO-GASIFICATION OF LIGNOCELLULOSIC BIOMASS IN A DOWNDRAFT GASIFIER USING MINERAL CATALYSTS. PhD. thesis, Universiti Teknologi PETRONAS.

ISHAK, MIUHAMMAD HARITH IRFAN (2020) MODAL ANALYSIS OF A STRAIGHT PIPE WITH AND WITHOUT FLUID. [Final Year Project] (Submitted)

ISMAIL, AZMAN (2020) INFLUENCE OF FRICTION STIR WELDING PARAMETERS ON THE MECHANICAL PROPERTIES OF AA6063 PIPE BUTT. PhD. thesis, Universiti Teknologi PETRONAS.

Ismail, Syahmi (2020) Finite Element Analysis (FEA) on Friction Stir Welding of Aluminium Alloy, AA5083 Using Coupled Eulerian-Lagrangian Model with Time-Scaling. [Final Year Project] (Submitted)

J

JA’AFAR, NUR SYAHIRAH (2020) ANALYSIS OF WATER-COOLED ELECTRIC CHILLER AT DISTRICT COOLING PLANT. [Final Year Project] (Submitted)

Jaafar, Nur Nabila Najad (2020) Effect of Hybrid Composition and Volume Fraction on Microstructure and Microhardness of 7075 Aluminum Alloy via Friction Stir Processing. [Final Year Project] (Submitted)

K

KOH , KELLY (2020) EXPERIMENTAL EVALUATION OF LOW ENERGY BUILDING USING DOUBLE-SKIN GREEN FAÇADE IN TROPICAL CLIMATE. Masters thesis, Universiti Teknologi PETRONAS.

KUANG, ZHI WEN (2020) WATER AND GAS ABSORPTION OF POLYTETRAFLUOROETHYLENE AS A PIPELINE. [Final Year Project] (Submitted)

Kamaruddin, Haikal (2020) STUDY OF FRICTION STIR WELDING TOOL’S COATING MATERIAL (TiAlN) FOR TUNGSTEN CARBIDE COBALT. [Final Year Project] (Submitted)

Kang , Chin Ann (2020) Development of Thermoplastic 3D Woven Composite. [Final Year Project] (Submitted)

Karthegesu, Shamni (2020) Predicting the Tensile Properties of Recycled Polypropylene (r-PP)/Mengkuang Leaf Fibre (MLF) Composite using Mathematical Modelling. [Final Year Project] (Submitted)

Khairul Anuar, Daniel Affendy Amri (2020) Tensile Properties Prediction of Polypropylene Reinforced Woven Kenaf Composite using Micromechanical Models. [Final Year Project] (Submitted)

Khang, Jeff @ Kuek Jun (2020) Knowledge-Based Front-End Engineering Design for Gas-Liquid Separator. Masters thesis, Universiti Teknologi PETRONAS.

L

Lal, Chandreshah (2020) DETERMINATION OF FRACTURE TOUGHNESS AND STRAIN ENERGY RELEASE RATE FOR BASALT/EPOXY COMPOSITES. [Final Year Project] (Submitted)

Loh, Xi Li (2020) Numerical Investigation of Geometrical Tolerance Effect on Torque and Power Output of Slip-On Sprocket. [Final Year Project] (Submitted)

M

MARTANG, MOHD NUR IZZWAN (2020) COMBUSTION ANALYSIS OF WATER-IN-BIODIESEL EMULSIFIED FUELS. [Final Year Project] (Submitted)

MOHAMED KHAIRI, MOHAMED IKRAM (2020) COMPUTATIONAL FLUID DYNAMIC (CFD) SIMULATION OF SLUG FLOW WITHIN PIPE BEND AND PIPE ELBOW WHICH INDUCE VIBRATION. [Final Year Project] (Submitted)

MOHAMMAD, SYAZWAN FIKRI (2020) THERMAL DEGRADATION BEHAVIOUR OF CARBON FIBRE WASTE AS A FILLER IN POLYMER HYBRID COMPOSITES. [Final Year Project] (Submitted)

MOHD YATIM, MUHAMMAD FARHAN (2020) SOOT REMOVAL SYSTEM USING ELECTROMAGNETIC WAVE HEATING FOR VEHICLE EXHAUST AFTER TREATMENT. [Final Year Project] (Submitted)

MUJTABA, SYED MUHAMMAD (2020) ADAPTIVE THRESHOLD BASED LEAK DETECTION SYSTEM FOR GAS MIXTURE PIPELINES. Masters thesis, Universiti Teknologi PETRONAS.

MUSTAFA KAMAL, MOHD AIDIL FIRDAUS (2020) STUDY OF STABILITY AND THERMAL CONDUCTIVITY OF MULTIWALL CARBON NANOTUBES AND COPPER OXIDE IN ETHYLENE GLYCOL AT MEDIUM TEMPERATURE. [Final Year Project] (Submitted)

Makentheran, Kayilass Hari Nair (2020) DYNAMIC ANALYSIS FOR SELF –LOCKING TRAPEZOIDAL ORIGAMI SHELL STRUCTURE. [Final Year Project] (Submitted)

Mat Arifin, Arief Farhan (2020) Experimental investigation of open loop thermosyphoning in evacuated tube receiver under varying heat flux. [Final Year Project] (Submitted)

Mazlan, Luqman Hakim (2020) Coefficient of Performance (COP) evaluation of electric water-cooled chiller during partial/full load operation at PUTRAJAYA plant 1. [Final Year Project] (Submitted)

Megat Iskandar, Megat Amirul Adli (2020) Numerical Study of Topology Optimization of Jacket Platform: A Review. [Final Year Project] (Submitted)

Me’eraj, Abdul Rasyid (2020) Risk Analysis of Domino Effect Due to Fire in Petroleum Plants. [Final Year Project] (Submitted)

Mohamad Noor, Wan Aizat (2020) The Study of Magneto-Active Polymer Composite Physiochemical Characteristics Using Petroleum Based Oil as a Dispersing Aid. [Final Year Project] (Submitted)

Mohd Noor, Mohammad Norazmeer (2020) Study on Material Integrity of Aluminium 7075 after Heat Treatment Process for Medical Tools. [Final Year Project] (Submitted)

Mohd Zarir, Marni Zalikha (2020) Investigation on The Characteristics of Magnetorheological Elastomer Using Natural Rubber and Petroleum-Based Oil. [Final Year Project] (Submitted)

Muzir, Nur Ashila Nadhirah (2020) A Study of Electrochemical Measurements Under Microemulsion Condition Corrosion. [Final Year Project] (Submitted)

N

N.Paramananthan, Nanthar Kugarn (2020) FUNCTIONALITY AND PERFORMANCE STUDY OF IOT INTEGRATED MULTI-TANK WATER LEVEL MONITORING SYSTEM. [Final Year Project] (Submitted)

NG, EUNICE HUI RONG (2020) The influence of acid surface treatment on the physical and mechanical properties of steel structure as a precursor for fiber metal laminate structure. [Final Year Project] (Submitted)

NIK YUSOFF, NIK HASSANUDDIN (2020) CHARACTERIZATION OF NI-CO/ALUMINA COATING PRODUCED FROM THE ALKALINE BATH AS A FUNCTION OF DEPOSITION PARAMETERS, ELECTROLYTE MOLARITY AND ALUMINA CONTENT. PhD. thesis, Universiti Teknologi PETRONAS.

NISSAR, ZUHAIB (2020) MODELLING AND EXPERIMENTAL INVESTIGATION OF MICROEXPLOSIONS IN FUEL DROPLETS. Masters thesis, Universiti Teknologi PETRONAS.

Nor Shaharim, Mohammad Haqimi Izwan (2020) Parametric Study of Double Axes Tracking Heliostat to Optimize Heliostat Field Efficiency. [Final Year Project] (Submitted)

Norafizal, Arif Isyraf (2020) Effects of Vacuum Bagging Techniques on Mechanical Properties of CarbonEpoxy Laminates. [Final Year Project] (Submitted)

R

R Sundaram, Ranjiivan (2020) Curing Methods on Early Strength of Geopolymer Concrete. [Final Year Project] (Submitted)

RAMLI, MUHAMMAD NURSHAFIQ (2020) Effects of Geometrical Dimension and Tolerance and Material Properties on Vibration and Torque Performance of Novel Torque Boosting Device. Masters thesis, Universiti Teknologi PETRONAS.

RAZAK, ARIFF QAMARUDDIN (2020) FAILURE ANALYSIS OF POLYVINYLIDENE FLUORIDE BY DEGRADATION FOR A PIPELINE. [Final Year Project] (Submitted)

ROSLI, MOHD ARIF FAHMI (2020) EXPERIMENTAL INVESTIGATION OF DROPLET EVAPORATION AND MICRO EXPLOSION BEHAVIOUR OF GAS-TO-LIQUID (GTL) FUEL. Masters thesis, Universiti Teknologi PETRONAS.

ROSLI, MUHAMAD FADHLI (2020) DEVELOPMENT OF PREDICTION MODELS OF OIL & GAS PIPELINE SUBJECT TO CORROSION USING REGRESSION TECHNIQUES. Masters thesis, Universiti Teknologi PETRONAS.

Ravevarman, Puviin Varman (2020) Degradation and Characterization of Bio-Waste Reinforced Polymer Composite. [Final Year Project] (Submitted)

Ravi Chandran, Meveeqhen (2020) Simulation Study on Utilisation of Biogas from Palm Oil Mill Effluent (POME) as Fuel for Diesel Generator Set. [Final Year Project] (Submitted)

Razalee, Muhammad Reezwan Shah (2020) RELATIVE ATTACK ANGLE OF FIN AFFECTS THE CONVECTIVE HEAT TRANSFER. [Final Year Project] (Submitted)

S

SHAHROL AZRAI, FARID AIMAN (2020) Electrochemical Impedance Evaluation Of Coating Under Simulated Splash Zone Condition. [Final Year Project] (Submitted)

Saifuddin, Ahmad Syahir (2020) Numerical Study Of Nanofluids Assisted Thermoelectric Air Conditioner. [Final Year Project] (Submitted)

Salim, Muhammad Shahrul Izzwan (2020) CRACK PREDICTION OF USING FINITE ELEMENT ANALYSIS. [Final Year Project] (Submitted)

Sandrasagar, Suresh (2020) Performance Evaluation of Vertically Oriented Compound Parabolic Concentrating Solar Collector Integrated with Heliostat Field. [Final Year Project] (Submitted)

Shafie, Izzat Sayyidi (2020) Characterizations of Solid Biomass Fuel Pellets. [Final Year Project] (Submitted)

Sivaraj, Ramaneish (2020) To study the Hardness and Mechanical Properties of Aluminium Composite Reinforced with Titanium Carbide & Graphite. [Final Year Project] (Submitted)

Su Rat, Santie Chai Khamkeo (2020) Computer Simulation Development of Hydro-cyclone Performance in Solid Liquid Separation. [Final Year Project] (Submitted)

T

TARIQ, ADEEL (2020) NUMERICAL AND EXPERIMENTAL ANALYSIS OF THERMAL AND HYDRAULIC PERFORMANCE OF PERFORATED AND SLOTTED PLATE-FIN HEATSINKS. Masters thesis, Universiti Teknologi PETRONAS.

W

Wan Basiron, Wan Amirul Asyraf (2020) Performance Investigation of Flat Plate Solar Collector using vegetable oil-based nanofluids. [Final Year Project] (Submitted)

Y

YASIR, MUHAMMAD (2020) THERMO-MECHANICAL PROPERTIES OF BASALT AND GLASS FIBER REINFORCED INTUMESCENT FIRE RETARDANT COATING FOR STRUCTURAL STEEL APPLICATION. PhD. thesis, Universiti Teknologi PETRONAS.

Yee , Guo Shen (2020) Numerical Study on Cross Flow Maisotsenko Cycle Indirect Evaporative Cooling (MCIEC) Heat Exchanger. [Final Year Project] (Submitted)

Yusa’, Nur Atikah (2020) Analysis on Mechanical Properties of Waste High Density Polyethylene (HDPE) Plastic. [Final Year Project] (Submitted)

Z

ZAMANI, MUHAMMAD ALDRIN SYAFRIZAL (2020) SIMULATION OF SAND PARTICLE FLOW THROUGH SAND SCREEN IN OIL WELL. [Final Year Project] (Submitted)

ZULKIFLI, MUHAMMAD AFIQ IKHWAN (2020) Numerical Evaluation of Thermal Striping in MLNG Tiga Regenerative Piping. [Final Year Project] (Submitted)

This list was generated on Thu Feb 9 18:25:39 2023 +08.