Items where Department / MOR is "Electrical and Electronic" and Year is 2016

Group by: Creators | Item Type | No Grouping

Jump to: Thesis | Final Year Project | Past Year Examination Question

Number of items: 218.

Thesis

,, MUHAMMAD AWAIS (2016) CLASSIFICATION OF ORAL POTENTIAL MALIGNANT DISORDERS (OPMDS) AND NORMAL REGION OF ORAL CAVITY USING VELSCOPE IMAGES. Masters thesis, Universiti Teknologi PETRONAS.

,, MUHAMMAD YASAR (2016) IMPROVEMENT OF PRESSURE AND COMPRESSIVE STRAIN SENSING USING PRISTINE CARBON NANOTUBES FOREST. Masters thesis, Universiti Teknologi PETRONAS.

AHMED ALMAHI, ABDELAZIZ YOUSIF (2016) DESIGN, FABRICATION AND CHARACTERIZATION OF A CMOS-MEMS MASS-SENSITIVE RELATIVE HUMIDITY SENSOR. Doctoral thesis, Universiti Teknologi PETRONAS.

ALI, SYED MUZAMMIL (2016) PARAMETRIC ANALYSIS ON REFLECTOR DESIGNS OF SINGLE ELEMENT CYLINDRICAL DIELECTRIC RESONATOR ANTENNA (CDRA) FOR WLAN APPLICATIONS. Masters thesis, Universiti Teknologi PETRONAS.

CHAUDHARY, PULKIT (2016) AMPLITUDE INDEPENDENT FEATURE EXTRACTION FOR EFFECTIVE SPEECH RETRIEVAL. Masters thesis, Universiti Teknologi PETRONAS.

DOAN , VI KIM KHANH (2016) INTEGRATION OF METAHEURISTIC TECHNIQUE IN THERMO-ELECTRIC COOLING DEVICE TO ENHANCE EFFICIENCY AND PERFORMANCE. Masters thesis, Universiti Teknologi PETRONAS.

FENG , YING XING (2016) MOOD STATES ON WORKING MEMORY AND BRAIN HAEMODYNAMIC RESPONSE USING OPTICAL TOPOGRAPHY MODALITY. Masters thesis, Universiti Teknologi PETRONAS.

HABIB, IFFAT (2016) CONGESTION CONTROL AND LOAD BALANCED ROUTING IN WIRELESS AD HOC NETWORKS USING OPTIMIZATION TECHNIQUES. Masters thesis, Universiti Teknologi PETRONAS.

HATTA, KHAIRUL ANWAR (2016) ESTABLISHMENT OF SOIL STRENGTH PARAMETERS AND SELECTED INDEX PROPERTIES USING ELECTRICAL RESISTIVITY METHOD. Masters thesis, Universiti Teknologi PETRONAS.

JILANI, MUHAMMAD TAHA (2016) MICROSTRIP RING RESONATOR BASED SENSING TECHNIQUE FOR BROILER MEAT QUALITY EVALUATION. Doctoral thesis, Universiti Teknologi PETRONAS.

MATHUR, NIRBHAY (2016) VISUALIZE VULNERABILITY MAP OF DENGUE INCIDENCES IN SELANGOR STATE USING GAUSSIAN MIXTURE MODEL. Masters thesis, Universiti Teknologi PETRONAS.

Muhammed Khan, Abid (2016) Pilot based Time OFDM Channel Estimation for DVB Applications. Doctoral thesis, Universiti Teknologi PETRONAS.

Narin, Sovann (2016) Enhancement of Short-term Load Forecasting Based on Parallel Hybrid Wavelet Neural Network. Masters thesis, Universiti Teknologi PETRONAS.

Nawaz, Faiza (2016) Efficient Data Delivery in Dense Reader Environment of Passive Sensor Network. Doctoral thesis, Universiti Teknologi PETRONAS.

OSMAN ALI, AMAL SERALKHATEM (2016) REAL TIME AGE INVARIANT FACE RECOGNITION. Doctoral thesis, Universiti Teknologi PETRONAS.

PARDIANSYAH, INDRATNO (2016) A COMBINED HISTOGRAM OF ORIENTED GRADIENTS AND COMPLETED LOCAL BINARY PATTERN METHODS FOR PEOPLE COUNTING IN A DENSE CROWD SCENARIO. Masters thesis, Universiti Teknologi PETRONAS.

PHAM , LAM VUONG (2016) DEVELOPMENT OF SCREENING METHOD FOR ALCOHOL USE DISORDER BASED ON ELECTROENCEPHALOGRAM ANALYSIS. Masters thesis, Universiti Teknologi PETRONAS.

RAHMAN, IMRAN (2016) OPTIMAL POWER ALLOCATION SCHEME FOR PLUG-IN HYBRID ELECTRIC VEHICLES USING SWARM INTELLIGENCE TECHNIQUES. Masters thesis, Universiti Teknologi PETRONAS.

ROSLI, NURFATIHAH SYALWIAH (2016) NEURAL NETWORK PREDICTION MODEL FOR FIELD INSTRUMENTS IN GAS METERING SYSTEM BASED ON PARTICLE SWARM OPTIMZATION. Masters thesis, Universiti Teknologi PETRONAS.

SAAND, ABDUL SATTAR (2016) OPTIMIZATION IN A DUAL-HOP MIM0 AMPLIFY-AND-FORWARD RELAY NETWORK. Doctoral thesis, Universiti Teknologi PETRONAS.

SHAFQUET, AREEBA (2016) ONLINE MEASUREMENT OF NON-NEWTONIAN WAXY CRUDE OIL FLOW PARAMETERS USING ELECTRICAL CAPACITANCE TOMOGRAPHY. Doctoral thesis, Universiti Teknologi PETRONAS.

SHAHZAD, AAMIR (2016) NEAR INFRARED IMAGING FOR SUBCUTANEOUS VEINS LOCALIZATION. Doctoral thesis, Universiti Teknologi PETRONAS.

SORIADI, NURHIDAYA (2016) DEVELOPMENT OF TITANIUM DIOXIDE NANOTUBE SYNTHESIZED BY ANODIZATION FOR HYDROGEN SENSING APPLICATION. Masters thesis, Universiti Teknologi PETRONAS.

SOVUTHY, CHEAB (2016) DESIGN OF MULTI-MODE AND MULTI-BAND MICROWAVE FILTER. Doctoral thesis, Universiti Teknologi PETRONAS.

Final Year Project

Januarisma, Vikri (2016) Eliminate P-wave Direction in Application of Exploration Seismology. [Final Year Project] (Submitted)

., Ng Yan Lim @ Chia Yan Lim (2016) Heart Disease Detection Using Mobile Phone and Wireless Sensor Networks. [Final Year Project] (Submitted)

A/L KUMARAN, DEVENTERAN (2016) Development of Novel Multilevel Inverter with Reduced Power Switches. [Final Year Project] (Submitted)

A/L Manogaran, Yuanath (2016) A Study of Hypertensive Retinopathy Changes and the Grading System of Hypertensive. [Final Year Project] (Submitted)

A/L RAMANATHAN, RAVIVARMA (2016) PERFORMANCE IMPROVEMENT OF ELECTRIC POWER GENERATION FOR OSCILLATING WATER COLUMN (OWC) WAVE ENERGY CONVERTER. [Final Year Project] (Submitted)

A/L SANMUGAM, LINGESHGUGAN (2016) THE DEVELOPMENT OF DUAL BAND DRA HYBRID ANTENNA. [Final Year Project] (Submitted)

A/L Sivem, Prasanthran (2016) Edge Detection Algorithm For Image Processing Of Search And Rescue Robot. [Final Year Project] (Submitted)

A/P Ravindran, Nandini (2016) Stroke Prediction from Hypertensive Retinopathy. [Final Year Project] (Submitted)

A/P SENIVASAN, SUGANTI (2016) Solar Energy Harvesting for Wireless Sensor Network (WSN). [Final Year Project] (Submitted)

ABDUL GHAFOOR, MUHAMMAD HAFIDZ (2016) A SOLAR RADIATION PREDICTION MODEL FOR APPLICATIONS IN ENERGY HARVESTING. [Final Year Project] (Submitted)

ABDUL MANAB, MUHAMMAD ZHARIF (2016) EFFICIENT AND ROBUST VESSEL DETECTION SYSTEM. [Final Year Project] (Submitted)

ALFIAA BASALLOM, SADDAM HASAN (2016) AN INVESTIGATION ON DEVELOPMENT OF A FUZZY CONTROLLER FROM THE VIEW OF STATE-SPACE SYSTEM. [Final Year Project]

AUGUSTIN JOHN, ALVIN ANAND (2016) Integration of Key Building Blocks for Search and Rescue Robots (Serabot). [Final Year Project] (Submitted)

Ab Rahman, Firdaus (2016) SOLAR BATTERY STORAGE SYSTEM. [Final Year Project] (Submitted)

Ab Rahman, Luqman Nur Hakim (2016) VOLTAGE STABILITY ANALYSIS FOR ENSURING POWER SYSTEM STABILITY. [Final Year Project] (Submitted)

Ab. Halim, Naqiatul Amirah (2016) ENHANCING THE CAPABILITIES OF SEARCH AND RESCUE ROBOT (BAMBOT). [Final Year Project] (Submitted)

Abd Rahman, Hadam (2016) Neutral Earthing Impedance Design in Mitigating Third Harmonic Current At The Generator Neutral. [Final Year Project] (Submitted)

Abdelhafiz Musa, Ahmed Abdelrahman (2016) HARMONICS IMPACT ON LOW VOLTAGE (LV) GRID CONNECTED SOLAR PHOTOVOLTAIC (GCSPV) SYSTEM. [Final Year Project]

Abdul Aziz, Ahmad Farhan (2016) Induction Motor Performance During Voltage Dip. [Final Year Project] (Submitted)

Abdul Malek, Muhammad Fadzly (2016) AUGMENTED REALITY BASED INDOOR POSITIONING NAVIGATION TOOL. [Final Year Project] (Submitted)

Abdul Somad, Aiman (2016) Comparative Study of Different Coil Geometries for Wireless Power Transfer Using Finite Element Method. [Final Year Project] (Submitted)

Abdullah, NurFarah Hanim (2016) Data Exchange among Multiple Robots. [Final Year Project] (Submitted)

Abdulmalik Al-Maqdad, Abdulmalik Kamal (2016) An Artificial Neural Network Model of Nutrient Release from Polymer-Coated Fertilizers. [Final Year Project] (Submitted)

Adnan, Anas (2016) Development of WirelessHART Adapter For Control Valve Actuation. [Final Year Project] (Submitted)

Ahmad, Nur Adzirah (2016) Microcontroller Based High Brightness LED Lighting Control for Hybrid Vehicles. [Final Year Project] (Submitted)

Ahmad Astor, Asyilah (2016) Developing, Implementing, and Assessing Decoupling Control for UTP Air Pilot Plant. [Final Year Project] (Submitted)

Ahmad Fadzli, Izz Danial Al-Fayyadh (2016) Laser Target Tracking. [Final Year Project] (Submitted)

Ali Ahmed, Hassan Abdelrahman (2016) Investigation in to Energy Storage of Solar Energy Harvesting Wireless Sensor Network. [Final Year Project] (Submitted)

Ali Dousa, Somia Mohamed (2016) Data fusion of video camera and Laser Range Finder (LRF) for obstacle avoidance. [Final Year Project] (Submitted)

Amalludin, Nurul Syuhada (2016) Early Detection Basal Stem Rot (BSR) using Electrical Capacitance Tomography (ECT). [Final Year Project] (Submitted)

Amir Shariffudin, Amira Shakina (2016) Design & Characterization of resistance-based corrosion under-insulation sensor. [Final Year Project] (Submitted)

Anuar, Mohamad Syarmie Faizlin (2016) Heart Rate Monitoring and Alert System Using Smartphone. [Final Year Project] (Submitted)

Anuar, Nur’ Aizat (2016) Monitoring and Charging of Wheelchair Batteries Based on Internet of Things. [Final Year Project] (Submitted)

Ayob, Ashaari Muhammad (2016) Dengue Spread Model using Climate Variables. [Final Year Project] (Submitted)

Azahar, Muhammad Zahid (2016) Development Of Electronics Scoring System To Measure Dexterity For Laparoscopy (Keyhole) Surgery Training. [Final Year Project] (Submitted)

Azman, Muhammad Amirul (2016) Segmentation and Cell Counting of Fluorescence Oral Cancer Cell Images Using Morphological Operations. [Final Year Project] (Submitted)

BOLHASSAN, NURUL SHAFINAZ (2016) IMPLEMENTATION OF NORMALIZED PID CONTROLLER FOR SYSTEMS WITH VARYING DELAY. [Final Year Project] (Submitted)

Ba Wazir, Abdulaziz Saleh Mahfoudh (2016) Performance Analysis and Calibration of a Novel CMOS-MEMS Humidity Sensor. [Final Year Project] (Submitted)

Badrul Hisham, Nor Aqilah Amira (2016) Performance of AlGaN/InGaN Multiple Quantum Well LEDs Simulated Using COMSOL. [Final Year Project] (Submitted)

Calvin , Low Eu Jin (2016) Development of a Self-diagnostic System for Photovoltaic based Highway Signage Boards and Warning Devices. [Final Year Project] (Submitted)

Cheah , Zong Yuan (2016) Nonlinear Model Predictive Control (NMPC) for Twin Rotor MIMO System (TRMS). [Final Year Project] (Submitted)

Chee , Pui San (2016) Robotics Rehabilitation for Training and Assessment of Upper Extremities. [Final Year Project] (Submitted)

Cheow , Yeng Peng (2016) Development of Graphical User Interface (GUI) for Antenna Design. [Final Year Project] (Submitted)

Chong , Kah Hin (2016) Optimizing the Performance of Wave Energy Converter for Power Generation. [Final Year Project]

ELTAYEB, ABUZAR MOHAMED ABDALLA (2016) DEVELOPMENT OF SOLAR ENERGY HARVESTING FOR WIRELESS SENSOR. [Final Year Project] (Submitted)

Ean , Chin Teck (2016) Real-Time Capacity Monitoring for Lithium Polymer Batteries. [Final Year Project] (Submitted)

Elamin Elsheikh, Islam Abdalla (2016) Implementation of Asymmetric Multiprocessing Support in a Real-Time Operating System. [Final Year Project] (Submitted)

Faili, Zahra (2016) Development of Low Cost Heart Rate Monitoring Device and Classification Technique Using Fuzzy Logics Algorithm. [Final Year Project] (Submitted)

GHAZALI, NUR AFIFAH (2016) Third Harmonic Filter Design in Mitigating High Current At the Generator Neutral. [Final Year Project] (Submitted)

HAMDAN, MUHAMAD HARITH (2016) System Integration and Experimentation for Energy Management System (EMS) Controller for Split-Parallel HEV. [Final Year Project] (Submitted)

HASHIM, MOHD ASYRAF (2016) AUTOMATED IP CAMERA: ATTENDANCE BASED APPLICATION USING FACIAL RECOGNITION. [Final Year Project] (Submitted)

Hassan, Esra Ali (2016) Smart Glasses for the Visually Impaired People. [Final Year Project] (Submitted)

Hassan Eltayeb, Yassin Abdelrasoul (2016) Indoor Simultaneous Localization and Mapping (SLAM) Using Laser Range Finder. [Final Year Project] (Submitted)

Hussin, Nur Ain Nabilah (2016) Thermal Analysis of Semiconductor: Peak Junction Temperature Prediction. [Final Year Project] (Submitted)

Ibrahim, Mohamad Haidar (2016) Flexible and Stretchable 3D Graphene/PDMS/PET composite film for strain sensing application. [Final Year Project] (Submitted)

Ismail, Muhammad Harris Fahmi (2016) Segmentation of Synthetic Aperture Radar (SAR) Image Using Graphcut. [Final Year Project] (Submitted)

Istab, Nurul Azlan (2016) SEGMENTATION OF PROSTATE IN MRI IMAGES USING GRAPH-CUT SEGMENTATION. [Final Year Project] (Submitted)

Ivan Tan, Sheng Wei (2016) Intelligent Microphone Stand. [Final Year Project] (Submitted)

JOHARRY, SITI HAJAR (2016) ANALYSIS AND CLASSIFICATION OF PAP SMEAR CELLS USING SHAPE FEATURES. [Final Year Project]

KHALID, HESHAM (2016) Study and Analysis of Power MOSFET Characteristics in Radiation Environment. [Final Year Project] (Submitted)

Kamaruddin, Muhammad Khairulsyamim (2016) Iris Recognition As Biometric Authentication. [Final Year Project] (Submitted)

Kamarudin, Zul Atiff (2016) Battery Management System for Wireless Mobile Charging. [Final Year Project] (Submitted)

Kang , Gim Pin (2016) Automatic Recognition of Handwritten Score Digits. [Final Year Project] (Submitted)

Krishnan, Yoghender (2016) 3D Fish Culture. [Final Year Project] (Submitted)

Kung Wen, Justin Lee (2016) Design of ultralow noise and THD low pass filter for audio analyzer. [Final Year Project] (Submitted)

Lau, Kevin (2016) Comparative Study of Different Coil Geometries for Wireless Power Transfer. [Final Year Project] (Submitted)

Luka, Mawa Patrick (2016) IMPROVEMENT OF GEOPHONE SENSITIVITY AT LOWER FREQUENCY (1 to 8HZ). [Final Year Project]

MD SHAKUR, NUR FATEHAH (2016) Development of Wireless Transmission Device For Current Detector for AC Motor. [Final Year Project] (Submitted)

MOHAMED YOUSUFF, FARWIZAH (2016) WATER WAVE AND ENERGY GENERATOR. [Final Year Project] (Submitted)

MOHD ZULFAKHAR, ANIS INSYIRAH (2016) THE EFFECT OF MILD EXERCISE ON ATTENTION PERFORMANCE AND STRESS LEVEL. [Final Year Project] (Submitted)

MUHAMAD BARZANI, FADHIL (2016) UNMANNED AERIAL VEHICLE (UAV)-DRONE UNDER ROBOT OPERATING SYSTEM (ROS) FOR OBSTACLE AVOIDANCE via TAG RECOGNITION. [Final Year Project]

Madzir, Mohammad Naaim (2016) Self-powered kit for lighting system. [Final Year Project] (Submitted)

Mahmoud Mogalid, Sabir Salah (2016) Energy Monitoring of Energy Harvesting Wireless Sensor Networks. [Final Year Project] (Submitted)

Makhtar, Muhammad Makram (2016) Inter-Robot Data Exchanged for Locomotion and Localisation. [Final Year Project] (Submitted)

Mazlan, Suraya Fateha (2016) Development of a Powered Exoskeleton for Lower Extremities. [Final Year Project] (Submitted)

Mba Obama, Mari Paz Eyang (2016) Flexible Transparent Conductor Film using Graphene-Carbon Nanotubes on PDMS. [Final Year Project] (Submitted)

Md Fuad, Muhammad Aiman (2016) Investigation On The Current Amplification For Multiple Input RF Energy Harvester Circuit. [Final Year Project] (Submitted)

Md Said, Mohd Shahruddin (2016) Dynamic Stability of Aerostat-Drone. [Final Year Project] (Submitted)

Medhi, Muhammad Fakhrul (2016) Hyperbilirubinemia Treatment Device. [Final Year Project] (Submitted)

Mifumu, Juan Esono (2016) Deep Learning In Retinal Vessel Extraction. [Final Year Project] (Submitted)

Min Chai, Sheng Le (2016) Design & Development of 3 Degree of Freedom Robot Controller. [Final Year Project] (Submitted)

Mohamed, Azza Hashim (2016) Keyboard-less System Using EEG Signals. [Final Year Project]

Mohamed Salleh, Putra Ahmad Khalifa (2016) PORTABLE STABILIZER FOR PICO-SCALE BUOY GENERATOR. [Final Year Project]

Mohammad Azam, Siti Fatimah (2016) Remote Temperature Sensing in Campus: An Internet of Things Environmental Monitoring Application. [Final Year Project] (Submitted)

Mohammad Yatim, Amirah Izzati (2016) Mobile Robot with Navigation Control and Communication. [Final Year Project] (Submitted)

Mohd Aziz, Wan Shahira (2016) Harmonic Study on UTP New Building Network. [Final Year Project] (Submitted)

Mohd Azmi, Muhammad Nazirul (2016) Indoor Lighting Coverage Simulator In A Process Plant. [Final Year Project] (Submitted)

Mohd Isa, Mohd Fazlie (2016) Pattern Classification of Human Epithelial Images. [Final Year Project] (Submitted)

Mohd Kamarudin, Nur Eliza (2016) DEVELOPMENT OF IRIS RECOGNITION SYSTEM. [Final Year Project] (Submitted)

Mohd Kamel, Muhamad Aizuddin (2016) Study and Analysis of Material Characteristics for Capacitive Coupling Wireless Power Transfer System. [Final Year Project] (Submitted)

Mohd Misri, Sarah (2016) Development of the Circuit to Detect Electric Currents in AC Motors for Wireless Monitoring. [Final Year Project] (Submitted)

Mohd Rawi, Noor Aiman Zafira (2016) Camera Alignment System for Face Detection. [Final Year Project] (Submitted)

Mohd Suhaimi, Nor Atiqah b (2016) Prediction of Peak Junction Temperature of Semiconductor Devices: A Simulation Study. [Final Year Project] (Submitted)

Mohd Tarik, Mohammad Haizad (2016) Design and development of fuzzy logic controller for cascade control application. [Final Year Project] (Submitted)

Muhammad, Muhammad Faiz (2016) Development of A Wireless Sensor Network For Flood Monitoring. [Final Year Project] (Submitted)

Mustaffa, Muhammad Dinie Akmal (2016) Analysis of Epileptic Seizure Using Wavelet Transform. [Final Year Project] (Submitted)

Mustaffa Kamal Basha, Abdul Aziz (2016) Development of LabVIEW FPGA program for Energy Management System (EMS) Controller for Hybrid Electric Vehicle (HEV). [Final Year Project] (Submitted)

Mustapha, Muhamad Nizam (2016) Fast Train Track Quality Measurement Using Gyro Sensors. [Final Year Project] (Submitted)

Nik Ab Rashid, Nik Nur Nailini (2016) Thermal Analysis of VLSI System: A Simulation Study. [Final Year Project] (Submitted)

Nmdjandod , Patrick Beriman (2016) Presenter Tracking for Video Recording on Intel Galileo Board. [Final Year Project] (Submitted)

Noor Azman, Nur Allia Ellysa (2016) Patterning Monolayer Graphene Using Plasma Etcher For Transparent Conducting Electrode Applications. [Final Year Project] (Submitted)

Norman, Nazrul Iqhwan (2016) Embedded System for Train Track Quality Assessment. [Final Year Project] (Submitted)

Noslan, Muhammad Zulhilmi (2016) Wearable sensors for personalized health. [Final Year Project] (Submitted)

Omar, Nurul Syuhada (2016) Rapid Data Exchange Using RFID for Examination Result Process. [Final Year Project] (Submitted)

Omar Al-Shaeer, Osamah Hasan (2016) Design and Development of Pipeline Inspection Vehicle (PIG). [Final Year Project] (Submitted)

Ooi , Yong Seng (2016) Developing A Single Phase Energy Monitoring System. [Final Year Project] (Submitted)

Osman, Hala Hatim (2016) ARTERIAL PULSE WAVEFORM AND ESTIMATION OF BLOOD PRESSURE. [Final Year Project]

Phoo , Khai Yong (2016) Portable EEG Systems for Application in Neuroergonomics. [Final Year Project] (Submitted)

Raja Badrol Hisham, Raja Muhammad Nazirul Mubin (2016) FULLY AUTOMATED DIABETIC RETINOPATHY MONITORING AND GRADING SYSTEM. [Final Year Project] (Submitted)

Ramlan, Farah Asyikin (2016) Outdoor Surveillance Camera Coverage For Process Plant. [Final Year Project] (Submitted)

Roslan, Muhamad Fazril (2016) Power Flow Study for UTP Microgrid. [Final Year Project] (Submitted)

Roslee, Nur Aqilah (2016) Segmentation of MRI Prostate Images using Gaussian Mixture Models (GMMs). [Final Year Project] (Submitted)

SENG, LEE WENG (2016) INTERACTIVE HANDWRITING RECOGNITION FOR COURSEWORK DATA ENTRY. [Final Year Project] (Submitted)

SHAMSUL KAMAR, FARAH AZLIN (2016) IMAGE STITCHING USING HARRIS CORNER & SIFT FEATURES. [Final Year Project] (Submitted)

SUHAIRY, MUHAMMAD SHAZWAN (2016) COMPARATIVE STUDY OF DIFFERENT COIL GEOMETRIES FOR WIRELESS POWER TRANSFER USING PROTOTYPES. [Final Year Project] (Submitted)

Saeed Al-Haddad, Saeed Ahmed (2016) Multi-Hop Wireless Sensor Network for Continuous Oxygen Tank’s Level Detection. [Final Year Project] (Submitted)

Salleh, Nor Hidahayati (2016) Corrosion Damage Analysis using Image Processing. [Final Year Project] (Submitted)

Samuji, Muhammad Fakhruddin (2016) Flood Monitoring and Alert System Using Wireless Sensor Network. [Final Year Project] (Submitted)

Selvathurai, Govindarajoo (2016) Development of Instrumented Cane for Control of Exoskeleton of Lower Limb. [Final Year Project] (Submitted)

Shahabudin, Nursyamimi (2016) Design and Modelling of Portable Pico Linear Generator for Wave Energy Conversion. [Final Year Project] (Submitted)

Shamsul Azman, Muhammad Ameer (2016) Path Planning Using Image Captured By Overhead Camera. [Final Year Project] (Submitted)

Sibawaihi, Muhammad Nizam (2016) A study on Peak-Load Shaving at UTP Hoste. [Final Year Project] (Submitted)

Sihar, Nur Ain (2016) State of Charge Estimation for Lithium Polymer Batteries. [Final Year Project] (Submitted)

Sukri, Ahmad Nasif (2016) DOCUMENT CONVERTER USING SMARTPHONE TO REFRESHABLE BRAILLE READER. [Final Year Project] (Submitted)

Sulaiman, Sufi Sayyid (2016) Articulated Three Degree of Freedom (DOF) Robot Arm Manipulator Design. [Final Year Project] (Submitted)

Syafrudin, Fitri Nadia (2016) Design and Improvement of Ventilation Air Cooling System for HVAC Unit Using PID Controller and VFD Techniques. [Final Year Project] (Submitted)

TAN , TECK YING (2016) Lighting System Design for Commercial Buildings with Higher Energy Efficiency. [Final Year Project] (Submitted)

Tan , Hon Shin (2016) Development Of Internet Of Things (IOT) For Process Control. [Final Year Project] (Submitted)

Tan , Khang Lim (2016) 3D Fish Culture and Monitoring System. [Final Year Project] (Submitted)

Thian , Xian Khai (2016) Enhancement of Power Generation by Capacitive Mixing. [Final Year Project] (Submitted)

Vetsandonphong, Natthawin (2016) Arduino Based Fall Detection and Alert System. [Final Year Project] (Submitted)

WAN SARIS, WAN MOHD FARID (2016) FLOOD MONITORING USING AUTOMATIC PACKET REPORTING SYSTEM APRS ON VHF. [Final Year Project] (Submitted)

Wee Kiat, Benjamin Chen (2016) Design and Development of Breathing Air Level Transmitter by using Arduino. [Final Year Project] (Submitted)

Wong , Keng Mun (2016) Design of Bluetooth Compatible Temperature and Photoplethysmogram (PPG) Monitoring System. [Final Year Project] (Submitted)

Woon , Tian Lok (2016) A Simplified GUI for EEG Acquisition and Signal Pre-Processing. [Final Year Project] (Submitted)

YUSOF, HASAN KARAMI (2016) I-V CHARACTERISTICS OF GRAPHENE FIELD EFFECT TRANSISTOR. [Final Year Project] (Submitted)

Yahaya, Safuan (2016) Development of Flexible 3D Graphene/PDMS Composite Film for Strain Sensing. [Final Year Project] (Submitted)

Yang, Por Hong (2016) Monitoring Class Attendance Via Mobile Application. [Final Year Project] (Submitted)

Yew , Jia-Ming (2016) Exploration of IEC 1131-3’s LAD and SFC Languages in PLC Programming. [Final Year Project] (Submitted)

ZAKARIA, MUHAMMAD HAFIZZUDDIN (2016) Comparative Investigation of Optimization Techniques for Photovoltaic Based Multilevel Inverter. [Final Year Project] (Submitted)

Zafian, Syaza Syahira (2016) Simulation Of Stiffness Control In Automotive Suspension Using Matlab-Simulink. [Final Year Project] (Submitted)

Zailan, Fatin Syamimi (2016) IMPLEMENTATION OF HOME AUTOMATION USING WIRELESS COMMUNICATION. [Final Year Project] (Submitted)

Zakaria, Abdul Aziz (2016) Automatic License Plate Recognition Software for Malaysian Vehicle License Plates. [Final Year Project] (Submitted)

Zakaria, Ahmad Syafiq (2016) DESIGN AND PERFORMANCE ASSESSMENT OF A PHOTO-FENTON REACTOR WITH IMMOBILIZATION OF FE ON NAFION MEMBRANE; FOR REMOVAL OF PAHs FROM THE SUPPLY WATER. [Final Year Project] (Submitted)

Zakaria, Siti Zubaidah (2016) MULTI-HOP WIRELESS SENSOR NETWORKS FOR REMOTE MONITORING OF SOIL MOISTURE. [Final Year Project] (Submitted)

Zemri, Nurul Syuhadah (2016) Development of an Automated Three-Phase Distribution Box System. [Final Year Project] (Submitted)

Zulkifli, Fadhlullah Hassan (2016) Multi-Robot Platooning Using Cameras. [Final Year Project] (Submitted)

Zulkifli, Nor Adiba (2016) Technical Losses Evaluation on UTP Electrical Network. [Final Year Project] (Submitted)

Zulkofli, Muhamad Hazim (2016) Exploration of Multilevel Inverter Topology Using Single and Double Source Unit with Solar System. [Final Year Project] (Submitted)

Zulkurnain, Zulmukhris Hazazi (2016) Smart Motor Driver System for Speed and Position Control of a DC Geared Motor. [Final Year Project] (Submitted)

a/p Muthusamy, Mugilleswari (2016) Android Application to Detect and Alert Tachycardia and Bradycardia using Pulse Rate Sensor. [Final Year Project] (Submitted)

Past Year Examination Question

ECB4313, ADVANCED ELECTRICAL MACHINES (2016) ECB4313 ADVANCED ELECTRICAL MACHINES. [Past Year Examination Question]

EDB1603, ELECTRICAL TECHNOLOGY (2016) EDB1603 ELECTRICAL TECHNOLOGY. [Past Year Examination Question]

Past Year Exam Question (2016) EBB4023 ECB4023 EDB3023 DATA AND COMPUTER NETWORK. [Past Year Examination Question]

Past Year Exam Question (2016) ECB1014 / EDB1013 CIRCUIT THEORY. [Past Year Examination Question]

Past Year Exam Question (2016) ECB1033 EDB1053 MICROELECTRONICS PHYSICS AND DEVICES. [Past Year Examination Question]

Past Year Exam Question (2016) ECB1053 DIGITAL ELECTRONICS. [Past Year Examination Question]

Past Year Exam Question (2016) ECB1053 EDB1034 DIGITAL ELECTRONICS. [Past Year Examination Question]

Past Year Exam Question (2016) ECB2123 EDB2023 SIGNALS AND SYSTEMS. [Past Year Examination Question]

Past Year Exam Question (2016) ECB2133 DIGITAL ELECTRONICS II. [Past Year Examination Question]

Past Year Exam Question (2016) ECB2143 EDB2063 MICROPROCESSOR. [Past Year Examination Question]

Past Year Exam Question (2016) ECB2163 EDB2043 COMMUNICATION SYSTEMS. [Past Year Examination Question]

Past Year Exam Question (2016) ECB2173 EDB2013 ELECTROMAGNETIC THEORY. [Past Year Examination Question]

Past Year Exam Question (2016) ECB3113 EDB2073 DIGITAL SIGNAL PROCESSING. [Past Year Examination Question]

Past Year Exam Question (2016) ECB3123 EDB3083 CONTROL SYSTEMS. [Past Year Examination Question]

Past Year Exam Question (2016) ECB3133 EDB2053 PROBABILITY AND RANDOM PROCESS. [Past Year Examination Question]

Past Year Exam Question (2016) ECB3153 EDB3063 POWER SYSTEMS. [Past Year Examination Question]

Past Year Exam Question (2016) ECB3153 POWER SYSTEMS. [Past Year Examination Question]

Past Year Exam Question (2016) ECB3163 EDB3073 POWER ELECTRONICS. [Past Year Examination Question]

Past Year Exam Question (2016) ECB3173 / EDB3053 ELECTRICAL MACHINES. [Past Year Examination Question]

Past Year Exam Question (2016) ECB4023 DATA AND COMPUTER NETWORK. [Past Year Examination Question]

Past Year Exam Question (2016) ECB4223 INDUSTRIAL AUTOMATION AND CONTROL SYSTEMS. [Past Year Examination Question]

Past Year Exam Question (2016) ECB4233 PLANT PROCESS CONTROL SYSTEMS. [Past Year Examination Question]

Past Year Exam Question (2016) ECB4313 ADVANCED ELECTRICAL MACHINES. [Past Year Examination Question]

Past Year Exam Question (2016) ECB4313 EBB4313 ADVANCED ELECTRICAL MACHINES. [Past Year Examination Question]

Past Year Exam Question (2016) ECB4333 ADVANCED POWER SYSTEMS. [Past Year Examination Question]

Past Year Exam Question (2016) ECB4413 COMPUTER SYSTEMS ARCHITECTURE. [Past Year Examination Question]

Past Year Exam Question (2016) EDB1013 CIRCUIT THEORY. [Past Year Examination Question]

Past Year Exam Question (2016) EDB1063 NETWORK ANALYSIS. [Past Year Examination Question]

Past Year Exam Question (2016) EDB1603 ELECTRICAL TECHNOLOGY. [Past Year Examination Question]

Past Year Exam Question (2016) EDB2034 ECB2113 ANALOGUE ELECTRONICS / ANALOGUE ELECTRONICS I. [Past Year Examination Question]

Past Year Exam Question (2016) EDB3013 INSTRUMENTATION & MEASUREMENT. [Past Year Examination Question]

Past Year Exam Question (2016) EDB3043 ECB2153 MICROELECTRONICS CIRCUITS ANALOG ELECTRONICS II. [Past Year Examination Question]

This list was generated on Fri Nov 22 16:00:15 2024 +08.