Items where Department / MOR is "Mechanical" and Year is 2008

Group by: Creators | Item Type | No Grouping
Jump to: | A | B | C | D | E | H | I | J | K | L | M | N | O | R | S | T | W | Y | Z
Number of items: 229.

Abdul Jalil, Muhammad Bukhari (2008) Freezing Point Depression Method for Hydrate Monitoring. [Final Year Project] (Unpublished)

Ahmad, Zarizambri (2008) Design and Analysis of a Pedal Box System for a small Race-car. [Final Year Project] (Unpublished)

Arif, Muharnad Fatikul (2008) Mechanical and Water Absorption Properties of Oil Palm Empty Fruit Bunch-High Density Polyethylene Composites. Masters thesis, Universiti Teknologi Petronas.

IBRAHIM ABDALLAH, MUNZIR AHME (2008) ANALYSIS OF PRESSURE DROP AND HEAT TRANSFER OF ANNULAR DEPOSITION TEST UNIT. Masters thesis, Universiti Teknologi Petronas.

LEE , PETER CHEE HONG (2008) DEVELOPING MULTI-DEGREES OF FREEDOM OF DEXTEROUS HUMANOID ROBOTIC HAND. [Final Year Project] (Unpublished)

Mazalan, Siti Fatimah (2008) Comparative Study of Different C02 Injection Modes for Baronia RV2 Reservoir. [Final Year Project] (Unpublished)

Mohd Ali, Ahmad Fadhil Hafiz (2008) The Enhancement of Micro Grinding Process by Using NdFeB to Seize Material Dust. [Final Year Project] (Unpublished)

Mohd Yusof, Mohd Shah Rizal (2008) Engine Performance and Exhaust Emission Characteristics of Fuel Oil-Diesel Fuel Mixture in a Single Cylinder Engine. [Final Year Project] (Unpublished)

Muharnad, Dzulkarnain (2008) RE-ENGINEERING OF THE AIR INTAKE MANIFOLD FOR UTP FORMULA CAR. [Final Year Project] (Unpublished)

Ndong , Luis-Casiano Mikue (2008) Study on Pumping System Design for Water Injection. [Final Year Project] (Unpublished)

Ramli, Mohd Syahmi (2008) Experimental Assessment on Corrosion under Insulation (CUI). [Final Year Project] (Unpublished)

Ramsah, Mohd Fasya (2008) Characterization and Properties of Nickel Powder and Carbon Powder Mixture. [Final Year Project] (Unpublished)

Rusli, Nurul Masnem Ahza (2008) Design of Table with Adjustable Height. [Final Year Project] (Unpublished)

Y ahaya, Mohd Roziee (2008) Effects of Particle Size on Mechanical Properties of Oil Palm Fruit Bunch Composites. [Final Year Project] (Unpublished)

A

A Rahman, Hamizah (2008) Design of an Explosion Vessel for Study of Flame Propagations. [Final Year Project] (Unpublished)

ABDULLAH, MUHAMAD ADLAN (2008) Engine Performance and Combustion Characteristics of Hydrogen in a Direct Injection Engine. Masters thesis, Universiti Teknologi PETRONAS.

ALI AZMAN BIN OMAR, ALI AZMAN (2008) INVESTIGATION ON STRESS CONCENTRATION FACTOR OF PIPING BRANCH JUNCTIONS SUBJECTED TO INTERNAL PRESSURE. [Final Year Project] (Unpublished)

Aaron Ang Kok Wye, Aaron (2008) Design of an Exhaust System For The UTP Formula SAE Race Car. [Final Year Project] (Unpublished)

Abd Rahim, Muhammad Yusof (2008) Pressure as an Indicator for Water Breakthrough for Horizontal Well Completion. [Final Year Project] (Unpublished)

Abdelwahid, Mohamed Noureldin (2008) STUCK DRILL PIPE WHILE DRILLING OPERATION. [Final Year Project] (Unpublished)

Abdul Halim Koh, Abdul Rahman (2008) Failure Investigation of a Steel Pipe. [Final Year Project] (Unpublished)

Abdul Rahman Bin Abdul Halim Koh, Abdul Rahman (2008) Failure Investigation of a Steel Pipe. [Final Year Project] (Unpublished)

Abdul Razak bin Rustami, Abdul Razak (2008) A Study into the Effect of Loading and Sliding Speed to the Tribological Properties of Brake Pad Material. [Final Year Project] (Unpublished)

Adi Akmal Bin Nasrul Hisham, Adi Akmal (2008) Study and Improvement of Drag Coefficient of a Bus. [Final Year Project] (Unpublished)

Ahmad Abustaman, Mohd Zikri (2008) Processing of Alumina Powder into Ceramic Foam Materials by Impregnating Polyurethane Sponge with Bonded Ceramic Slurry. [Final Year Project] (Unpublished)

Ahmad Damanhuri bin Sharipudin, Damanhuri (2008) New Design of Heat Spreader for Semiconductor Device. [Final Year Project] (Unpublished)

Ahmad Exsan bin Othman, Ahmad Exsan (2008) Study on various types of antirust to prevent corrosion on heat sink terminal. [Final Year Project] (Unpublished)

Ahmad Fadhil Hafiz Bin Mohd Ali, Ahmad Fadhil Hafiz (2008) The Enhancement of Micro Grinding Process By Using NdFeB To Seize Material Dust. [Final Year Project] (Unpublished)

Ahmad Fairus Bin Zamri, Ahmad Fairus (2008) Analysis of Jet Fire on Intumescent Coating Applied on Steel Substrate. [Final Year Project] (Unpublished)

Ahmad Khairuddin bin Ahmad Kamal, Ahmad Khairuddin (2008) CFD Simulation and Wind Tunnel Test of NACA 4412 Airfoil Wing Section at Different Angles of Attack. [Final Year Project] (Unpublished)

Ahmad Ruslan, Ahmad Ehsan (2008) Effect of Well Pattern to the Water Alternating Gas (WAG) Carbon Dioxide Injection on Angsi 1-35 Reservoir. [Final Year Project] (Unpublished)

Ahmad Syahidi Bin Che Zainal, Ahmad Syahidi (2008) An Experimental Study On The Wave Induced Instability Of Pipelines: The Breakout Of Pipelines. [Final Year Project] (Unpublished)

Ahmad Tarmizi, Mohd Fairozlan (2008) Total Productive Maintenance Assessment on Discrete Manufacturing System. [Final Year Project] (Unpublished)

Ahmad Zamani Masnizam Bin Abdullah Zawawi, Ahmad Zamani Masnizam (2008) Study of the Effects of Flame Perturbation by High-Speed Schlieren Imaging. [Final Year Project] (Unpublished)

Ajid, Azlia (2008) Solar Powered Exhaust Fan for Automobiles. [Final Year Project] (Unpublished)

Ali, Fahmi (2008) Design and Analysis of Suspension System for a Formula SAE Race Car. [Final Year Project] (Unpublished)

Amir Afiz Bin Mohamed Nizan, Amir Afiz (2008) Human Transporter(E-Porter). [Final Year Project] (Unpublished)

Ammar Bin Azhar, Ammar (2008) Design Of A Finger Trainer Prototype For Paralyzed/Stroke Patients. [Final Year Project] (Unpublished)

Amran, Mohd Hafiz (2008) Investigation On Savonius Wind Turbine In Directed Flow. [Final Year Project] (Unpublished)

Anis Rafie bin Ahmat Rmadani, Anis Rafie (2008) Repeating Weld Repair’s Effect on Microstructure and Mechanical Properties of Weld Metal. [Final Year Project] (Unpublished)

Arifin, Mohd Nurhadi (2008) The Investigation i11to Tribological Properties of Carbon Fiber Reinforced Composite. [Final Year Project] (Unpublished)

Arob Deng Chol, Michael (2008) Study of Stick-slip torsional vibration in Drilling Operation. [Final Year Project] (Unpublished)

Ayob, Mohamad Firdaus (2008) Investigation into the Potential ofBio-based Automotive Engine Lnbrieation Oil Using Tribologieal Test Method. [Final Year Project] (Unpublished)

Azazian, Azahariman (2008) The Effects of Multiple-Use of Polyethylene Terephthalate (PET) Bottles on Antimony Concentration. [Final Year Project] (Unpublished)

Azemi, Mohd Aziman (2008) Failure Analysis of Heat Exchanger's Tubes at GPP Kerteh. [Final Year Project] (Unpublished)

Aziz, Azman (2008) Design and Analysis of a Disc Rotor for a Small Race Car's Braking System. [Final Year Project] (Unpublished)

Azlan Bin Mohamed Adnan, Azlan (2008) Computer Aided Reverse Engineering with Renishaw Digitizer for Digitization and Mazak for Model Fabrication. [Final Year Project] (Unpublished)

Azri Izwan Bin Mazlan, Azri Izwan (2008) Characterization and Properties of Copper and Carbon Powders Mixture. [Final Year Project] (Unpublished)

Azrul Nizam Bin Othman, Azrul Nizam (2008) To Design and Develop Fe-Cu-C Alloying Suitable for Self Lubricating Bearing through Powder Metallurgy (P/M) Technique. [Final Year Project] (Unpublished)

B

Besar, Mohd Firdaus (2008) COz Corrosion Stndy by Electrochemical Impedance Spectroscopy (EIS) and Linear Polarization Resistance (LPR). [Final Year Project] (Unpublished)

C

CHE MANSHOR, MAGHF ARAH (2008) Design and Development of mould of UTP souvenir photo frame using Rapid Prototyping and Rapid Tooling technique. [Final Year Project] (Unpublished)

Chai , Set Lee (2008) Use of Magnetic Field in Paraffin Wax Deposition Control for Surface Facilities. [Final Year Project] (Unpublished)

D

Dzulkifli, Muhammad Nazri (2008) AERODYNAMIC CHANGES WHEN TWO VEHICLES ARE IN PROXIMITY TO EACH OTHER. [Final Year Project] (Unpublished)

E

Ee, TeikMun (2008) Pilot Study on Laminated Tooling with Implementation of Conformal Channel. [Final Year Project] (Unpublished)

Emier Helmee Md Dewa, Emier Helmee (2008) Redesign and Fabrication of a Mechanical Seal for Pumps. [Final Year Project] (Unpublished)

H

HALLIYEV, SERDAR (2008) RELATIVE PERMEABILITY HYSTERESIS. [Final Year Project] (Unpublished)

HEMCHI, THA WEESAK (2008) Thermal Stress and Thermal Expansion in a brake drum of heavy commercial truck. [Final Year Project] (Unpublished)

Hafifi bin Mohd Yusop, Hafifi (2008) Modeling and Analysis of Disc Brake Performance. [Final Year Project] (Unpublished)

Hamat, Mohd Eazaq Farommi (2008) Evaporative Cooler As an Air Inlet Treatment Of Gas Turbine. [Final Year Project] (Unpublished)

Harun, Firdaus (2008) Fitness-for-Service Assessment for Pressurized Components with Geometric Distortion. [Final Year Project] (Unpublished)

Hassan, Cik Suhana (2008) Stress Analysis of Steam-Methane Reformer Tube. [Final Year Project] (Unpublished)

Hassan, Raja Shahzad (2008) Injection Parameters Effect on the Perfom1ance of Compressed Natural Gas Direct Injection (CNG-DI) Engine under Lean Stratified Conditions. Masters thesis, UNIVERSITI TEKNOLOGI PETRONAS.

Hassan Jamil, Roshida (2008) Design ofExperiment on Ultra Violet Curing Die Attach Filmby Using Taguchi Method to Optimize Quality. [Final Year Project] (Unpublished)

Ho , Sir Wee Lee (2008) Study on Corrosion Inhibitor Availability. [Final Year Project] (Unpublished)

Huei, Dee Boon (2008) Design and Fabrication of a Lab Scale Thermal Energy Storage in Ice. [Final Year Project] (Unpublished)

I

Ismail , Mohd Fadhlan (2008) Stress Concentration Factors at Two Radial Adjacent Nozzle-Header Connections of a Cylindrical Pressure Vessel. [Final Year Project] (Unpublished)

J

Jamaludin, Nur Syahadah (2008) Fabrication of Pinion Gear for Power Window of a Car through Powder Metallurgy Technique. [Final Year Project] (Unpublished)

K

Kamarul Bahrin B. Mohd Kamil, Kamarul Bahrin (2008) Temperature Distribution on a Car Disc Brake. [Final Year Project] (Unpublished)

Kimin, Mohd Azrul Amin (2008) PRELIMINARY DESIGN OF PALM Oil. FROND GASIFIIm. [Final Year Project] (Unpublished)

Kong, Chai Chen (2008) The Study of Flow Characteristic in the Riser Pipe from the Subsea Wellhead to Kikeh FPSO. [Final Year Project] (Unpublished)

Kong , Chai Chen (2008) The Study of Flow Characteristic in the Riser Pipe from the Subsea Wellhead to Kikeh FPSO. [Final Year Project] (Unpublished)

Kum, Chee Mun (2008) Design of Multi-Cavity Injection Mold for Tensile and Flexural Test Specimens. [Final Year Project] (Unpublished)

Kum , Chee Mun (2008) Design of Multi-Cavity Injection Mold for Tensile and Flexural Test Specimens. [Final Year Project] (Unpublished)

L

LEONG, KHAI SIANG (2008) Drilling Fluid Loss Control By Using Oil Palm Fibres. [Final Year Project] (Unpublished)

Le , Bang Duc (2008) Designing Omni-Directional Mobile Robot Platform for Research. [Final Year Project] (Unpublished)

Leong, Song Seng (2008) Customizing Prosthetic Leg Socket by using Rapid Prototype with Reverse Engineering. [Final Year Project] (Unpublished)

Longwa Milia, Richard Lado (2008) OPTIMIZATION OF. DRILLING HYDRAULICS IN VERTICAL HOLES. [Final Year Project] (Unpublished)

M

MASA ALOGO BINDANG, Manuel (2008) Investigation of the Environmental Effect on Adhesive Bonds. [Final Year Project] (Unpublished)

MOHAMAD AF ANDI, NUR HASYIMAH (2008) STUDY OF ZEOLITE IN MITIGATING FORMATION DAMAGE DUE TO INORGANIC SCALING. [Final Year Project] (Unpublished)

MOHD SHAFIQ AHMAD DAHALAN, MOHD SHAFIQ (2008) Extract Motion from Picture Sequence. [Final Year Project] (Unpublished)

MOHD. YUSOFF, AHMAD SYAUFIK (2008) Bio-ethanol Fuel Study on Spray Characterization Using High Speed Digital Camera. [Final Year Project] (Unpublished)

MUHAMMAD AQMAL BIN RATASHA, MUHAMMAD AQMAL (2008) Implementation of Risk-Based Inspection on Offshore Facilities. [Final Year Project] (Unpublished)

MUHAMMAD KHAIRIL ANUAR BIN MOKHTAR, MUHAMMAD KHAIRIL (2008) DESIGN AND DEVELOPMENT OF A SOLAR COOKER. [Final Year Project] (Unpublished)

MUHAMMAD NAZRI BIN DZULKIFLI, MUHAMMAD NAZRI (2008) Aerodynamic changes when two Vehicles are in a Proximity to each other. [Final Year Project] (Unpublished)

Mahir Elya El feel Agla, Mahir Elya (2008) Improving Hole Cleaning on High Angle Wells. [Final Year Project] (Unpublished)

Marjono, Nurulain (2008) Determination of Stress Intensity Factor for Arc-shaped Tension Specimen by Using Finite Element Analysis. [Final Year Project] (Unpublished)

Mat Nasir, Mohamad Faiz (2008) Cavitation Failure of Local Made Propellers and Suggestion for Improvement. [Final Year Project] (Unpublished)

Mat Salleh, Siti Nur Hidayah (2008) The Effect of Multiple-use of Polystyrene Cups on Styrene Monomer Migration. [Final Year Project] (Unpublished)

Mat Shayuti, Muhammad Shafiq (2008) The Effect of High Temperature on Styrene Monomer Migration from Polystyrene. [Final Year Project] (Unpublished)

Mazlan, Azri Izwan (2008) Characterization and Properties of Copper and Carbon Powders Mixture. [Final Year Project] (Unpublished)

Md Dewa, Emier Helmee (2008) Redesign and Fabrication of a Mechanical Seal for Pumps. [Final Year Project] (Unpublished)

Md Din, Mohd Hazwan (2008) Study on Automotive Driveline System with Torque Converter Clutch under Harmonically Varying Normal Load. [Final Year Project] (Unpublished)

Md Fadhli Helmi B Noor Kamaruzaman, Md Fadhli Helmi (2008) Design of Submerged Wave-Induced Forcing Elements to Power a Linear Generator. [Final Year Project] (Unpublished)

Md Jaedan, Mohd Sahrul (2008) OPTIMIZATION OF CATHODE WASTE MATERIALS ON EPOXY BASED CONDUCTIVE PAINT PROPERTIES. [Final Year Project] (Unpublished)

Md Yunus, Yusheila (2008) Hybrid Solar Dryer with Biomass Integration. [Final Year Project] (Unpublished)

Md Yusof, Mohd Norzahidi (2008) Design and Development ofClothes Drying Closet Using Solar Energy. [Final Year Project] (Unpublished)

Megat Atif Bin Megat Shahair, Megat Atif (2008) Application of Weibull Probability to Predict the Size of Inclusion in Metallic Material. [Final Year Project] (Unpublished)

Megat Shahair, Megat Atif (2008) Application ofWeibull Probability to Predict the Size of Inclusion in Metallic Material. [Final Year Project] (Unpublished)

Mohamad Amir Ridzwan B Mansor , Mohamad Amir Ridzwan (2008) The Design of Mechanisms for Gantry Crane Experimental Rig. [Final Year Project] (Unpublished)

Mohamad Faiz bin Mat Nasir, Mohamad Faiz (2008) Cavitation Failure of Local Made Propellers and Suggestion for Improvement. [Final Year Project] (Unpublished)

Mohamad Firdaus Bin Ayob, Mohamad Firdaus (2008) Investigation into the Potential of Bio-based Automotive Engine Lubrication Oil Using Tribological Test Method. [Final Year Project] (Unpublished)

Mohamad Najib Bin Mohtar, Mohamad Najib (2008) Developing Carbon Particle Reinforced Aluminium Composite by Powder Metallurgy. [Final Year Project] (Unpublished)

Mohamad Noor, Mohd Ruzaini (2008) Optimizing Heat Insulation of a Solar Oven. [Final Year Project] (Unpublished)

Mohamed Faiz bin Mohamed Amin, Mohamed Faiz (2008) Designing Air Intake System for Engine Performance and Efficiency Optimisation. [Final Year Project] (Unpublished)

Mohamed Fuad Al Farabi Shazi B Shaarani, Mohamed Fuad Al Farabi Shazi (2008) Design and Implementation of Robofly Wing Flapping Mechanism Using Piezoelectric Crystal. [Final Year Project] (Unpublished)

Mohamed Nizan, Amir Afiz (2008) HUMAN TRANSPORTER (E-Porter). [Final Year Project] (Unpublished)

Mohammad Asyraf bin Mohammad Hatta, Mohammad Asyraf (2008) Engine Testing of Gasoline and E5, E10, E15 and E20 Ethanol Blends. [Final Year Project] (Unpublished)

Mohammad Hatta, Mohammad Asyraf (2008) Engine Testing of Gasoline, ES, ElO, E15 and E20 Ethanol Blends. [Final Year Project] (Unpublished)

Mohammad Zuhairi bin Ramly, Mohammad Zuhairi (2008) The Design and Fabrication of a prototype machine: “asam gelugor” processing machine. [Final Year Project] (Unpublished)

Mohd Abd Ghafar, Mohd Afiq (2008) Feasibility Study on Possibility of Using Flare Gas as a Source of Energy. [Final Year Project] (Unpublished)

Mohd Aiman Bin Ismail, Mohd Aiman (2008) Microstructure Characterization of Creep-Tested Reformer Tube Material. [Final Year Project] (Unpublished)

Mohd Akmal Bin Mohd Sobli, Mohd Akmal (2008) Spray Characteristic by using Phase Doppler Anemometry (PDA) and Laser Doppler Anemometry (LDV). [Final Year Project] (Unpublished)

Mohd Ali, Munirah (2008) Design & Development of Lab Scale Latent Heat Energy Storage Equipment using Paraffin Wax. [Final Year Project] (Unpublished)

Mohd Amirul Hakim Bin Sulaiman, Mohd Amirul Hakim (2008) Banana Trunk As A Lost Circulation Material In Hydrocarbon Drilling Fluid. [Final Year Project] (Unpublished)

Mohd Aziman Bin Azemi, Mohd Aziman (2008) Failure Analysis of Heat Exchanger’s Tubes at GPP Kerteh. [Final Year Project] (Unpublished)

Mohd Azuan Bin Mohamad Nor, Mohd Azuan (2008) Study And Development Of Pellet Fuel From Oil Palm Frond. [Final Year Project] (Unpublished)

Mohd Eazaq Farommi Bin Hamat, Mohd Eazaq (2008) Evaporative Cooler As an Air Inlet Treatment Of Gas Turbine. [Final Year Project] (Unpublished)

Mohd Fadhlan bin Ismail, Mohd Fadhlan (2008) Stress Concentration Factors at Two Radial Adjacent Nozzle-Header Connections of a Cylindrical Pressure Vessel. [Final Year Project] (Unpublished)

Mohd Fairozlan Bin Ahmad Tarmizi, Mohd Fairozlan (2008) Total Productive Maintenance Assessment on Discrete Manufacturing System. [Final Year Project] (Unpublished)

Mohd Faizal Din Chan, Mohd Naquib (2008) Vibration Isolation of Floating Raft System. [Final Year Project] (Unpublished)

Mohd Fasya b. Ramsah, Mohd Fasya (2008) Characterization and Properties of Nickel Powder and Carbon Powder Mixture. [Final Year Project] (Unpublished)

Mohd Fikram Bin Mat Yazid, Mohd Fikram (2008) Development of a Failure Prediction Model for Heat Exchanger Tube. [Final Year Project] (Unpublished)

Mohd Izwan Hadi b. Ismail @ Mansor, Mohd Izwan (2008) Parametric Study on Passive Suspension of Light Rail Vehicle (LRV). [Final Year Project] (Unpublished)

Mohd Khalifa Taufiq Kamaruddin, Mohd Khalifa Taufiq (2008) Emergency Power Supply To Start A Car. [Final Year Project] (Unpublished)

Mohd Naim B. Ruslan, Mohd Naim (2008) Microbiological Influence Corrosion Study on Offshore pipelines. [Final Year Project] (Unpublished)

Mohd Naquib bin Mohd Faizal Din Chan, Mohd Naquib (2008) Vibration Isolation of Floating Raft System. [Final Year Project] (Unpublished)

Mohd Nasir, Mohd Alif Syazwan (2008) Experimental Modelling of the Fluid Flow in a Furnace Top of an Ethane Cracker in EPEMSB, Paka. [Final Year Project] (Unpublished)

Mohd Nazri Bin Me, Mohd Nazri (2008) Design of Laboratory Scale Prototype of Hydrothermal Crystallizer. [Final Year Project] (Unpublished)

Mohd Nazwan bin Dzulkarnine, Mohd Nazwan (2008) Phased Array: An Alternative of Non Destructive Test Method to Replace Conventional Radiographic Test (RT) and Ultrasonic Test (UT) for Linepipe Inspection. [Final Year Project] (Unpublished)

Mohd Norzahidi Bin Md Yusof, Mohd Norzahidi (2008) Design and Development of Clothes Drying Closet Using Solar Energy. [Final Year Project] (Unpublished)

Mohd Nuh Aizat B Mohd Daut, Mohd Nuh Aizat (2008) CNC Manufacturing of NACA 4412 Wing Sections for Wind Tunnel Test. [Final Year Project] (Unpublished)

Mohd Nurhadi bin Arifin, Mohd Nurhadi (2008) The Investigation into Tribological Properties of Carbon Fiber Reinforced Composite. [Final Year Project] (Unpublished)

Mohd Radzi Bin Mohd Anua, Mohd Radzi (2008) Design and Prototyping of Centrifugal Pump Impeller to be used as Water Injection Pump for Hydrocarbon Artificial Lift. [Final Year Project] (Unpublished)

Mohd Ruzaini Bin Mohamad Noor, Mohd Ruzaini (2008) Optimizing Heat Insulation of a Solar Oven. [Final Year Project] (Unpublished)

Mohd Shah Rizal Bin Mohd Yusof, Mohd Shah Rizal (2008) Engine Performance and Exhaust Emission Characteristics of Fuel Oil-Diesel Fuel Mixture in a Single Cylinder Engine. [Final Year Project] (Unpublished)

Mohd Shukri Bin Mohd Nor, Mohd Shukri (2008) Material Compatibility And Fuel Properties For E10 And E85. [Final Year Project] (Unpublished)

Mohd Sobli, Mohd Akmal (2008) Spray Characteristic by using Phase Doppler Aiiemometry (PDA) and Laser Doppler Anemomctry (LDV). [Final Year Project] (Unpublished)

Mohd Taufek Bin Tumali, Mohd Taufek (2008) Design Of Freewheel Coupling. [Final Year Project] (Unpublished)

Mohd Ubaidillah bin Mohd Kamal, Mohd Ubaidillah (2008) Design of A Ballast Tank For A Small Underwater Remotely Operated Vehicle (ROV). [Final Year Project] (Unpublished)

Mohd Yasin, Irwan Syah (2008) Design andFabrication ofHybrid Solar-Biomass System for Crops Drying. [Final Year Project] (Unpublished)

Mohd Yunus, Mohd Zulfadli (2008) Risk Based Inspection on Gas Processing Plant. [Final Year Project] (Unpublished)

Mohd Yusop, Hafifi (2008) MODELING AND ANALYSIS OF DISC BRAKE PERFORMANCE. [Final Year Project] (Unpublished)

Mohd Zain, Ihsan (2008) Fabrication of a Small Scale Model of Chancellor Award Trophy using CAD/CAM and CNC Milling Machine. [Final Year Project] (Unpublished)

Mohd Zaki Al Hafiz bin Rosli, Mohd Zaki Al Hafiz (2008) Implementation of dust control system using management and planning tools (MPT). [Final Year Project] (Unpublished)

Mohd Zikri Bin Ahmad Abustaman, Mohd Zikri (2008) Processing of Alumina Powder into Ceramic Foam Materials by Impregnating Polyurethane Sponge with Bonded Ceramic Slurry. [Final Year Project] (Unpublished)

Mohd. Nasrul Bin Mat Yusof, Mohd. Nasrul (2008) Gas Turbine Blade Failure Due To Hot Corrosion. [Final Year Project] (Unpublished)

Mohtar, Mohamad Najib (2008) Developing Carbon Particle Reinforced Alnmininm Composite byPowder Metallurgy. [Final Year Project] (Unpublished)

Mokhtar, Zainur Azwin (2008) ANALYSIS ON CHARACTERISTIC OF SABAH BENTONITE AT IDGH TEMPERATURE UNDER DYNAMIC CONDffiON. [Final Year Project] (Unpublished)

Moktar, Mohammad Faiz (2008) Study on Sintering Behavior of Alumina Particle Reinforced Aluminum Matrix Composites and Its Properties. [Final Year Project] (Unpublished)

Muhamad Afiq Bin Ahmad, Muhamad Afiq (2008) Gas Turbine Efficiency Improvement at Centralised Utility Facilities (CUF) Kertih, Terengganu. [Final Year Project] (Unpublished)

Muhamad Farizuddin Anwar bin Mansor, Muhamad Farizuddin (2008) Design Of A Cathodic Protection Against Corrosion For Marine And Offshore Structure. [Final Year Project] (Unpublished)

Muhamad Nasrah, Nur Syazni (2008) State Variable Feedbaek Control of a Gantry Crane. [Final Year Project] (Unpublished)

Muhamad Zainurul Asyraf bin Ismail, Muhamad Zainurul Asyraf (2008) CFD of Viscoelastic Fluid in Horizontal Flow Pipes. [Final Year Project] (Unpublished)

Muhamad Zulhairie bin Moideen, Muhamad Zulhairie (2008) Sway Reduction of Tower Crane. [Final Year Project] (Unpublished)

Muhammad Aizuddin Bin Muaz, Muhammad Aizuddin (2008) Implication of Design and Operation on Cooling Load and Energy Cost for Academic Building At UTP. [Final Year Project] (Unpublished)

Muhammad Aizuddin bin Zainalabidin, Muhammad Aizuddin (2008) Miscible CO2 Injection: Sensitivity To Fluid Properties Tinggi Field. [Final Year Project] (Unpublished)

Muhammad Bin Roslan, Muhammad (2008) Thermal Characterization of Carbonaceous Pitches from Residue of PETRONAS Refinery. [Final Year Project] (Unpublished)

Muhammad Bukhari bin Abdul Jalil, Muhammad Bukhari (2008) Freezing Point Depression Method for Hydrate Monitoring. [Final Year Project] (Unpublished)

Muhammad Farid Bin Abdullah, Muhammad Farid (2008) Study and Design of Compressed Air System for Optimum Operation. [Final Year Project] (Unpublished)

Muhammad Ikhbar B. Md Ismail, Muhammad Ikhbar (2008) Effect of Performance of A DC Motor by Replacing Ferrite Magnet with Melt Spun NdFeB Magnet. [Final Year Project] (Unpublished)

Muhammad Naim bin Ariffin, Muhammad Naim (2008) Design of a New Centrifugal Pump Impeller. [Final Year Project] (Unpublished)

Muhammad Shafiq bin Mat Shayuti, Muhammad Shafiq (2008) The Effect of High Temperature on Styrene Monomer Migration from Polystyrene Cup. [Final Year Project] (Unpublished)

Muhammad Thaqif Bin Roslim, Muhammad Thaqif (2008) Experimental Study on Scale Control in Surface Pipelines by Magnetic Descaler. [Final Year Project] (Unpublished)

Muhammad Yusof B. Abd Rahim, Muhammad Yusof (2008) Pressure as an Indicator for Water Breakthrough for Horizontal Well Completion. [Final Year Project] (Unpublished)

Muhammad Zukni Bin Ibrahim, Muhammad Zukni (2008) Design and Analysis of Power Take-Off (PTO) and Telescopic Driveshafts. [Final Year Project] (Unpublished)

Muhd Khiyar, Nur Zeenaida (2008) An Investigation on the Tribological Performance of Carbon nanotube (CNT) as a Lubricant Additive to Locally Made Engine Oil. [Final Year Project] (Unpublished)

Mujtahid bin Mohd Abidin, Mujtahid (2008) An Investigation on the Effects of an Intake Air-Swirl Device on Fuel Consumption of a Spark Ignition Engine. [Final Year Project] (Unpublished)

N

NUR AZURA BINTI KAMARUZZAMAN, NUR AZURA (2008) Wave Energy Eletric Generator. [Final Year Project] (Unpublished)

Ngatini, Maini Rizal (2008) Effects of Fiber Reinforcement in Intumescent Formulations for Char Strengthening. [Final Year Project] (Unpublished)

Ngo Dinh Phuong, Dinh Phuong (2008) Simulation and Performance Test of CNC Machining Center. [Final Year Project] (Unpublished)

Nor Asma Rusni Ab. Alim, Nor Asma Rusni (2008) A Study on the Effect of Surface Finish on Corrosion of Carbon Steel in CO2 Environment. [Final Year Project] (Unpublished)

Norafif Afnan Mohd Nordin, Norafif Afnan (2008) Effect of Deformation to the Performance of Aluminium Sacrificial Anode. [Final Year Project] (Unpublished)

Nur Syahadah binti Jamaludin, Nur Syahadah (2008) Fabrication of Pinion Gear for PowerWindow of a Car through Powder Metallurgy Technique. [Final Year Project] (Unpublished)

Nur Syazni binti Muhamad Nasrah, Nur Syazni (2008) State Variable Feedback Control Of A Gantry Crane. [Final Year Project] (Unpublished)

Nur Zeenaida Muhammad Khiyar, Nur Zeenaida (2008) An Investigation on the Tribological Performance of Carbon nanotube(CNT) as a Lubricant Additive to Locally Made Engine Oil. [Final Year Project] (Unpublished)

Nurfariza Binti Mohd Zuki, Nurfariza (2008) Reducing Sway of Gantry Crane Load. [Final Year Project] (Unpublished)

Nurhusna Bt Yusoff , Nurhusna (2008) Design Calculations and Experimental Analysis of “Over Roof Solar Chimney”. [Final Year Project] (Unpublished)

Nurzaki Bin Ikhsan, Nurzaki (2008) Design and Analysis of a Hybrid Composite-Steel Frame Chassis for a Small Racecar. [Final Year Project] (Unpublished)

O

Omar , Siti Aisyah (2008) Cooperative Control of Dual Series Robots. [Final Year Project] (Unpublished)

Ong, Chin K wang (2008) Optimization Of Well Location And Number Of Production Well. [Final Year Project] (Unpublished)

R

Rahiman, Raieza Hanim (2008) Investigation on Lost Circulation Materials (LCM) Derived From Dorian Peel Waste For Drilling Fluid Formulation. [Final Year Project] (Unpublished)

Raieza Hanim Rahiman, Raieza Hanim (2008) Investigation on Lost Circulation Materials (LCM) Derived From Durian Peel Waste For Drilling Fluid Formulation. [Final Year Project] (Unpublished)

Ramly, Mohammad Zuhairi (2008) The Design and Fabrication of a prototype machine: "asam gelugor" processing machine. [Final Year Project] (Unpublished)

Richard Lado Longwa Milla, Richard Lado (2008) Optimization of drilling hydraulics in vertical holes. [Final Year Project] (Unpublished)

Rosdi, Syarizatul Nadia (2008) Application of Solar Energy in Drying Pepper. [Final Year Project] (Unpublished)

Rosli, Mohd Zaki AI Hafiz (2008) Mnltitask Anti-Dust Cleaner. [Final Year Project] (Unpublished)

Roslim, Muhammad Thaqif (2008) Experimental Study on Scale Control in Surface Pipelines by Magnetic Descaler. [Final Year Project] (Unpublished)

S

SALIM, MOHAMMAD RAZISW ADY (2008) Experimental Modeling ofthe Flow in the Furnace Top of an Ethane Cracker at EPEMSBPaka. [Final Year Project] (Unpublished)

Saiful Aznan, Muhammad Zulhilmi (2008) Analysis on electrical power requirement of a hybrid solar-electric oven. [Final Year Project] (Unpublished)

Sasendera S/O Balamohan, Sasendera (2008) Feasibility of Oil-Palm Fronds for Biomass Gasification. [Final Year Project] (Unpublished)

Seow , Lee Lee (2008) Energy Recovery by Conversion of Thermal Energy of Flue Gases to Electricity. [Final Year Project] (Unpublished)

Serdar Halliyev, Halliyev (2008) Relative Permeability Hysteresis. [Final Year Project] (Unpublished)

Sha'ari, Asmawi (2008) SIMULATION OF SINTERING IN POWDER METALLURGY APPLICATION FOR FERROUS MATERIALS. [Final Year Project] (Unpublished)

Shakawi Efendy Jamaludin, Shakawi Efendy (2008) Study of the Use of Orifice as an Alternative for Steam Trap. [Final Year Project] (Unpublished)

Siti Fatimah binti Mazalan, Siti Fatimah (2008) Comparative Study of Different CO2 Injection Modes for Baronia RV2 Reservoir. [Final Year Project] (Unpublished)

Siti Nur Hidayah Binti Mat Salleh, Siti Nur Hidayah (2008) The Effect of Multiple-use of Polystyrene Cups on Styrene Monomer Migration. [Final Year Project] (Unpublished)

Soraya Abd Rahman, Soraya (2008) A Study on Co-firing Empty Fruit Bunch (EFB) with Coal as Potential Fuel. [Final Year Project] (Unpublished)

Sufian Hardi Bin Yusof, Sufian Hardi (2008) Failure Analysis on Water Heater Tube. [Final Year Project] (Unpublished)

Suhaimi, Nor Ernie Akmal (2008) Characterization of Local Sands for Possible Use as Proppant. [Final Year Project] (Unpublished)

Sukur, Mohammad Ariff (2008) Mechanical and Microstructural Characterization of Hybrid Composite Developed By Compression Molding. [Final Year Project] (Unpublished)

Sulaiman, Mohd Amirul Hakim (2008) BANANA TRUNK AS A LOST CIRCULATION MATERIAL IN HYDROCARBON DRILLING FLUID. [Final Year Project] (Unpublished)

Suriawani Bt Sulaiman, Suriawani (2008) Design of intake cooling system for Taurus 60 Gas Turbine Generator in UTP Gas District Cooling Plant using chilled water supply. [Final Year Project] (Unpublished)

Syafri bin Mohd Yunus, Syafri (2008) Improvement of Oil and Water Separation in Three-Phase Conventional Separator Using Hydrocyclone Inlet Device. [Final Year Project] (Unpublished)

Syahidatulmazidah binti Ismail, Syahidatulmazidah (2008) Magnetic Properties and Corrosion Study on Bonded NdFeB Magnet Using Wet and Dry Binders. [Final Year Project] (Unpublished)

Syarizatul Nadia binti. Rosdi, Syarizatul (2008) Application of Solar Energy in Drying Pepper. [Final Year Project] (Unpublished)

T

TAN , YINN HOONG (2008) A STUDY OF MECHANICAL ROBUSTNESS OF PORTABLE ELECTRONIC DEVICE SUBJECTED TO MECHANICAL DROP. [Final Year Project] (Unpublished)

Tan , Jason Min Chuan (2008) Evaluation and Modelling Residual Stress of a Joining - Sialon to Austenitic Stainless Steel. [Final Year Project] (Unpublished)

Tan , Min Chuan, Jason (2008) Evaluations and Modelling of Residual Stress of a joining- Sialon to Austenitic Stainless Steel. [Final Year Project] (Unpublished)

Tan , Yinn Hoong (2008) A Study of Mechanical Robustness of Portable Electronic Device Subjected to Mechanical Drop. [Final Year Project] (Unpublished)

Taufi Qil Hafiz Bin Mohd Tahar, Taufi Qil Hafiz (2008) Modelling and Analysis of a Car Bumper. [Final Year Project] (Unpublished)

Teh, Choon Chi (2008) Study on Characterisation and Property of Local Sand. [Final Year Project] (Unpublished)

Thaweesak Hemchi, Thaweesak (2008) Thermal stress and Thermal expansion in a brake drum of heavy commercial truck. [Final Year Project] (Unpublished)

Thembinkosi Robert Khumalo, Robert Khumalo (2008) Analytical and CFD Simulation of an on-roof Wind Generator Using Biomass. [Final Year Project] (Unpublished)

Tuan Nur Aiman Bin Tuan Kamaruddin, Tuan Nur Aiman (2008) Investigation of the Effect of Exhaust Middle Pipe Length to the Engine Performance. [Final Year Project] (Unpublished)

W

Wan Ahmad Fuad Ali bin Wan Abd Ghafar, Wan Ahmad Fuad Ali (2008) Comparison of Methods to Reduce Grid Orientation Effect in Miscible Flood Simulation. [Final Year Project] (Unpublished)

Wan Amalina Wan Zaharuddin, Wan Amalina (2008) Study on the Integrity of the Intumescent Bonding to the Steel Substrate before Fire Exposure. [Final Year Project] (Unpublished)

Wan Ibrahim, Wan Mohd Syazwan (2008) RELIABIUTY PREDICTION AND MODELING: A Case Study ofDry Gas Seal and Buffer Gas System on Compressor for Gas Transportation. [Final Year Project] (Unpublished)

Wan Ismail, Che Wan Mohd Hafizul Azizi (2008) Design and Analysis of a Drive Train System for a Small Race Car. [Final Year Project] (Unpublished)

Wan Mazlan, Wan Mohd Safwan (2008) Development of an External Laptop Cooler with Thermoelectric Device. [Final Year Project] (Unpublished)

Wan Mohd Syazwan Bin Wan Ibrahim, Wan Mohd Syazwan (2008) Reliability Prediction And Modeling: A Case Study Of Dry Gas Seal And Buffer Gas System On Compressor For Gas Transportation. [Final Year Project] (Unpublished)

Wan Mohd Syazwan Bin Wan Ibrahim, Wan Mohd Syazwan (2008) Reliability Prediction And Modeling: A Case Study Of Dry Gas Seal And Buffer Gas System On Compressor For Gas Transportation. [Final Year Project] (Unpublished)

Wong , Chung Hoong (2008) Study of Drop Impact Resistance on Fiber Reinforced Composite Plates. [Final Year Project] (Unpublished)

Y

Y ahaya, Mohd Roziee (2008) Effect of Used Engine Oil to High Strength Microwave Incinerated Rice Husk Ash (MIRRA) Concrete. [Final Year Project] (Unpublished)

Yusheila Bt Md Yunus, Yusheila (2008) Hybrid Solar Dryer with Biomass Integration. [Final Year Project] (Unpublished)

Z

Zainalabidin, Muhammad Aizuddin (2008) MISCIBLE C02 INJECTION: SENSITIVITY TO FLUID PROPERTIES TINGGI FIELD. [Final Year Project] (Unpublished)

Zakaria, Ariff Ezwan (2008) Sintering Carbon Nanotubes Reinforced Copper Powder Using Different Particle. [Final Year Project] (Unpublished)

Zamri, Ahmad Fairus (2008) Analysis of Jet Fire on IntumescentCoating Applied on SteelSubstrate. [Final Year Project] (Unpublished)

Zarizambri Bin Ahmad, Zarizambri (2008) Design and Analysis of a Pedal Box System for a small Race-car. [Final Year Project] (Unpublished)

Zul Hilmi bin Awang, Zul Hilmi (2008) Investigation The Tribological Properties of Fiber Composite Material Reinforced With Carbon Nano Tube(CNT). [Final Year Project] (Unpublished)

This list was generated on Thu Feb 9 05:49:43 2023 +08.