Items where Department / MOR is "Mechanical" and Year is 2016

Thesis

,, MUHAMMAD YASIR (2016) THE STUDY OF MACHINABILITY AND STRESS CORROSION CRACKING OF AISI 316L STAINLESS STEEL USING END-MILLING. Masters thesis, Universiti Teknologi PETRONAS.

,,, Firmansyah (2016) Mixture and Thermal Stratification Effects on the RCCI Combussion in a Constant Volume Chamber. Doctoral thesis, Universiti Teknologi PETRONAS.

., AFOLABI LUKMON OWOLABI (2016) PERFORMANCE ENHANCEMENT OF NANO-ADDITIVES IN A FLAT-PLATE SOLAR COLLECTOR INTEGRATED WITH THERMAL ENERGY STORAGE SYSTEMS. PhD. thesis, Universiti Teknologi PETRONAS.

ABBAS ATYA, ABBAS HASSAN (2016) COMBUSTION OF DEWATERED POULTRY SLUDGE IN A LABORATORY SCALE FLUIDIZED BED COMBUSTOR. Doctoral thesis, Universiti Teknologi PETRONAS.

AHMED BHAYO, BILAWAL (2016) AN EXPERIMENTAL INVESTIGATION ON PERFROMANCE ASSESSMENT OF S-ROTORS FOR STAND-ALONE WIND POWER SYSTEM. Masters thesis, Universiti Teknologi PETRONAS.

AHMED YASSEN, TADAHMUN (2016) DEVELOPMENT AND EVALUATION OF SOLAR THERMAL HYBRID DRYING SYSTEM. Doctoral thesis, Universiti Teknologi PETRONAS.

AKBAR, AHMAD RADIKAL (2016) DEVELOPMENT OF AUTO-REINFORCE MAGNETIC FLYWHEEL AS REGENERATIVE ENERGY STORAGE FOR AUTOMOBILE ENGINE. Masters thesis, Universiti Teknologi PETRONAS.

AL BATATI, NABIL (2016) SIMULATION OF DRILL STRING VIBRATION DUE TO RISER'S OSCILLATION. Masters thesis, Universiti Teknologi PETRONAS.

ASLAM, MUHAMMAD (2016) Powder Injection Molding of Modified 316L Stainless Steel for Dental Implant Application. PhD. thesis, Universiti Teknologi PETRONAS.

AZIZ AL-WAKEEL, HAITHAM BEHNAM (2016) INVESTIGATION OF LOCALIZED RAPID SOOT OXIDATION USING METALASSISTE HIGH FREQUENCY ELECTROMAGNETIC HEATING. Doctoral thesis, Universiti Teknologi PETRONAS.

Abdalla, Abdulrahman Yousif (2016) Experimental and Numerical Simulation Investigations of Non-Newtonian Flow in Straight and Curved Pipes for Drag Reduction. Masters thesis, Universiti Teknologi PETRONAS.

Chala, Girma Tadesse (2016) The Formation of Gas Voids in Waxy Crude Oil with Thermal Shrinkage. Doctoral thesis, Universiti Teknologi PETRONAS.

HAMIZOL, MUHAMMAD SYAHMI (2016) DISSERTATION TITLE: EXTRACTION OF CONTINUOUS CELLULOSE FIBER FROM MENGKUANG LEAVES: THE INFLUENCE OF EXTRACTION PROCESS PARAMETERS. Masters thesis, Universiti Teknologi PETRONAS.

IBRAHIM MOHMMED, ABDALELLAH OMER (2016) THE EFFECT OF SLUG TWO-PHASE FLOW ON THE MECHANICAL STRESS BEHAVIOUR OF RIGID PIPELINES. PhD. thesis, Universiti Teknologi PETRONAS.

Javaid, Muhammad Yasir (2016) Effect of Tappered and Rectangular Wing Forms on The Dynamic of an Underwater Glider. Doctoral thesis, Universiti Teknologi PETRONAS.

KHAN, MUHAMMAD HAMMAD (2016) REVISITING FANGER'S THERMAL COMFORT MODEL USING MEAN BLOOD PRESSURE AS A BIO-MARKER: AN EXPERIMENTAL INVESTIGATION. Masters thesis, Universiti Teknologi PETRONAS.

KHOO, BOO KEAN (2016) EXPERIMENTAL AND NUMERICAL SIMULATION STUDY OF INDUCTOR FAULT BY INVESTIGATING WINDING CONTOUR. Doctoral thesis, Universiti Teknologi PETRONAS.

MD. IBRAHIM, NOR NURULHUDA (2016) DIFFUSION BONDING AND POST-BOND HEAT TREATMENT OF SIALON TO NITRIDED A lSI 420 STAINLESS STEEL. Doctoral thesis, Universiti Teknologi PETRONAS.

MENGAL, ALI NAWAZ (2016) FATIGUE LIFE PREDICTION OF BASALT- CARBON HYBRID COMPOSITE FOR WIND TURBINE ROTOR BLADES. PhD. thesis, Universiti Teknologi PETRONAS.

MOHAMED TERMIZI, NOOR ANIZA (2016) THERMOGRAVIMETRIC KINETIC ANALYSIS OF POULTRY PROCESSING DEWATERED SLUDGE FOR THERMOCHEMICAL CONVERSION PROCESS. Masters thesis, Universiti Teknologi PETRONAS.

MOHIDEEN BATCHA, MOHD FAIZAL (2016) AERODYNAMICS AND HYDRODYNAMICS OF A SWIRLING FLUIDIZED BED WITH SLOPED DISTRIBUTOR. Doctoral thesis, Universiti Teknologi PETRONAS.

MUSTAFA, AYAD TAREQ (2016) INVESTIGATION AND EVALUATION OF DEVELOPED SOLAR VORTEX ENGINE. Doctoral thesis, Universiti Teknologi PETRONAS.

Mohammed Al-Hashimy, Zahid Ibrahim (2016) Experimental and Numerical Investigation on the Vibrations Induced by Slug Flow Interaction with Horizontal Pipe Structure. Doctoral thesis, Universiti Teknologi PETRONAS.

NANIMINA, ALEXIS MOUANGUE (2016) POWDER-MIXED ELECTRICAL DISCHARGE MACHINING OF BIOMEDICAL AND INDUSTRIAL GRADE ALLOYS. Doctoral thesis, Universiti Teknologi PETRONAS.

Nordin, Normayati (2016) Performance Investigation of Turning Diffusers at Various Geometrical and Operating Parameters. Doctoral thesis, Universiti Teknologi PETRONAS.

SAFIYULLAH, FEROZKHAN (2016) COMPUTATIONAL MODELING OF GAS COMPRESSOR DIAGNOSTICS USING GENETIC PROGRAMMING. Masters thesis, Universiti Teknologi PETRONAS.

SARWAR, UMAIR (2016) FAULT DIAGNOSIS MODEL FOR ROTATING MACHINERY BASED ON MULTIPLE CONDITION MONITORING DATA SOURCES. Masters thesis, Universiti Teknologi PETRONAS.

UMAR ALKALI, ADAM (2016) INVESTIGATION OF THERMALLY ENHANCED MACHINING ON MACHINABILITY OF 316L STAINLESS STEEL USING OXYACETYLENE FLAME AS HEAT SOURCE. Doctoral thesis, Universiti Teknologi PETRONAS.

WOO , TZE KEONG (2016) DEVELOPMENT AND ANALYSIS OF HIGH SPEED DRILLING INDUCED DELAMINATION IN GLASS FIBER REINFORCED POLYMER. PhD. thesis, Universiti Teknologi PETRONAS.

Zafar, Muhammad Adeel (2016) Material Flow Behavior and Mechanical Properties of Friction Stir Welded 16MM-Thick Nylon-6 Plates. Masters thesis, Universiti Teknologi PETRONAS.

Final Year Project

., AHMAD HASSAN (2016) FIRE HAZARDS & RISK ASSESSMENT IN OFFSHORE PETROLEUM FACILITIES. [Final Year Project] (Submitted)

., Koh Kelly (2016) Experimental Evaluation of Innovated Mixed Flow Wind Turbine for Updraft Solar Power Generation Systems. [Final Year Project]

., Muhamad Fadhli Bin Rosli (2016) Mechanical Properties and Microstructural Evaluation of Dissimilar Friction Stir Weld of AA6061 Aluminium Alloy and AA5083 Aluminium Alloy. [Final Year Project]

., Muhammad Izwan Bin Hazim (2016) Investigation of Open Source Optimizers for Mechanical Design Optimization Problems. [Final Year Project]

@Sinawat, Clement Welley (2016) Investigation On the Physical, Mechanical and Corrosion Behaviour of 316L Austenitic Stainless Steel Nitriding at Elevated Temperature. [Final Year Project] (Submitted)

A Rahim, Nurkamariah (2016) AN INVESTIGATION OF MECHANICAL PROPERTIES ON NITRIDED AUSTENITIC STAINLESS STEEL. [Final Year Project] (Submitted)

A Siaramu, Arvin Kumar (2016) A Study of Corrosion Behaviour for Steels Precipitated with Paraffin Wax Precipitation. [Final Year Project] (Submitted)

A.Kumar, Ganesh (2016) An effective optimization of rainwater storage tanks for different roof materials in commercial buildings. [Final Year Project] (Submitted)

A/L AIYYAPPAN, BHUVANA RUEBEN (2016) A STUDY OF MECHANICAL PROPERTIES AND CRUSHING PERFORMANCE OF CARBON FIBER WOUND TO HDPE PIPE (CFWHP. [Final Year Project] (Submitted)

A/L Arumugam, Thibankumar (2016) Characterization of Methane Based Graphene Synthesis on H13 Tool Steel. [Final Year Project] (Submitted)

A/L Christopher, Benedict Chris (2016) Evaluation On Corrosion Resistance Of X-65 Pipeline Steel To Various Species Of Microbes. [Final Year Project] (Submitted)

A/L D. Ramanujam, Keeran Daniel (2016) Mooring Analysis of Very Large Floating Structures in Malaysian South China Sea Waters. [Final Year Project] (Submitted)

A/L Dev Kumar, Sujev Kumar (2016) Enhancement of Fire Resistance of Intumescent Coatings by Basalt and Refractory-Type Hybrid Fibre. [Final Year Project] (Submitted)

A/L ELIYATHAMBY, DHANARAJ (2016) Dynamic Analysis of Stick-Slip and Bit Bounce in Oilwell Drillstring. [Final Year Project] (Submitted)

A/L Muniandy, Prathab (2016) Dynamic Analysis of High Frequency Vibro-Impact Drilling. [Final Year Project] (Submitted)

A/L Prakasan, Arjund (2016) EFFECT OF TRANSVERSE, LONGITUDINAL AND VERTICAL SEPARATION ON DRAG FOR A FLEET OF AUTONOMOUS UNDERWATER GLIDER. [Final Year Project] (Submitted)

A/L Ramesh, Potriyan Sivanathan (2016) Performance Evaluation of Fixed Plate Air To Air Energy Recovery Heat Exchanger in Buildings Air Conditioning System. [Final Year Project] (Submitted)

A/L THANARAJEE, SHAATIESH (2016) Vibration Analysis of Carbon Nanotube Based Bio-Sensors. [Final Year Project] (Submitted)

A/L Vesvanathan, Dhivendra (2016) Performance study of an engine waste heat driven adsorption cooling for automotive air conditioning. [Final Year Project] (Submitted)

A/L Vijayakumaran, Harrivin (2016) Simulation of Swirling Wet Steam Flow through a Supersonic Nozzle. [Final Year Project]

ABD MOKTI, NOORAKBAR (2016) Wear Analysis of Tungsten Carbide Coated with Diamond-Like Carbon as Friction Stir Welding Tool. [Final Year Project] (Submitted)

AMIRUL LUTHFI CHAN, HAZIQ LUTHFI (2016) Experimental Study on the Impact of Wet Sand Particle to the Erosion of Mild Steel Plate. [Final Year Project] (Submitted)

Ab Hadi, Muhamad Naqiuddin (2016) Cellular Core Sandwich Structures for Offshore Construction. [Final Year Project] (Submitted)

Ab. Kadir, Nuraqliah (2016) SIMULATION STUDY ON SMART SPRINKLER FOR UNIFORMITY IMPROVEMENT. [Final Year Project] (Submitted)

Abd Rashid, Muhamad Naim (2016) Wear Resistance Study of Nitrided ASS 316L Above The Sensitization Temperature of 1200oC. [Final Year Project] (Submitted)

Abdul Malek, Wan Nuradila (2016) Mechanical Properties of Recycled HDPE-Areca Leaf Sheath Fiber Composite. [Final Year Project] (Submitted)

Abdul Rahim, Mohamad Syazwan (2016) Structural Analysis of Rotating Baffles in a CO2 Separator. [Final Year Project] (Submitted)

Abdul Rahim, Muhammad Adib (2016) Design and Development of 3D Printed Robotic Gripper. [Final Year Project] (Submitted)

Abdul Rahman, Mohd Ridzuan (2016) Tensile and Flexural Properties of Woven Micro-Braided Yarn Composite. [Final Year Project] (Submitted)

Abdul Wali, Muhamad Ammar (2016) Study of Force Feedback in Steer-By-Wire Vehicles for Driving Simulator. [Final Year Project] (Submitted)

Abdullah, Abdul Hanif (2016) Effect of Ferrous (. [Final Year Project] (Submitted)

Abdullah, Abdul Haris (2016) The Comparison between SMAW and FSW Performances on Microstructure, Hardness and Corrosion Susceptibility of Carbon Steel. [Final Year Project] (Submitted)

Abdullah, Ahmad Afif (2016) Solar Desiccant Cooling System. [Final Year Project] (Submitted)

Abdullah, Muhammad Al Fikhri (2016) Analysis of Instabilities Dynamics in Discontinuous Stratified Flow in Horizontal Pipeline. [Final Year Project] (Submitted)

Adam, Mohd Farid (2016) Numerical and Simulation Analysis of PDC cutter Associated with the Rate of Penetration. [Final Year Project] (Submitted)

Adnan, Adni Hashira (2016) Evaluation of Carbon Dioxide Emission of Plate Heat Exchanger for Chilled Water Distribution. [Final Year Project] (Submitted)

Ahmad Fauzi, Marwan Asyraaf (2016) Synthetic Analysis Of Fluid Flow Through Particle Image Velocimetry (PIV). [Final Year Project] (Submitted)

Ali, Lina Fahimah (2016) Development of Excel Based Reliability Model to Estimate Life Distribution of Mechanical Seals. [Final Year Project] (Submitted)

Ali, Zain (2016) INVESTIGATION OF CONJUGATE HEAT TRANSFER OF A ROTATING LATENT HEAT ENERGY STORAGE. [Final Year Project] (Submitted)

Aman Zaharil, Muhammad Hafiz Osman (2016) Experimental Modeling and Evaluation of Solar Cooker For Malaysia Potential. [Final Year Project] (Submitted)

Amat, Arif Danial (2016) Cold-Flow CFD Analysis of Intake-Compression process for Hydrogen-Fuelled Internal Combustion Engine. [Final Year Project] (Submitted)

Aminuddin, Ikhwan Syamim (2016) Investigation of Mechanical properties of Nitrided Weldments of Austenitic Stainless Steel After Quenching. [Final Year Project] (Submitted)

Anak Biga, Blythe Kollias (2016) Characterization of Restart Pressure in Production Pipeline for Waxy Crude Oil as A Result of Injection of Non-Reacting Gas. [Final Year Project] (Submitted)

Anak Richard, Angel (2016) Quality Characterization of the Vacuum-Bagging-Only (VBO) – Out Of Autoclave (OOA) Cured Composite Panels. [Final Year Project] (Submitted)

Anuar, Ahmad Naufal (2016) Analysis of Wheel Rolling Resistance in a Personal Electric Vehicle. [Final Year Project] (Submitted)

Arafat Mahdy, Amr Essam (2016) Investigation on The Effect of Drill Diameter During Bone Drilling for Surgery Applications. [Final Year Project] (Submitted)

Armo, Dinish Kumar (2016) Experimental Study of Chloride Stress Corrosion Cracking In Stainless Steel. [Final Year Project] (Submitted)

Awadh Ba Dhib, Mohammed Ali (2016) MECHANICAL PROPERTIES OF HYBRID FIBER REINFORCED REACTIVE POWDER CONCRETE. [Final Year Project]

Azizuddin, Aliah Azlin (2016) DEVELOPMENT OF THERMAL INSULATION BY UTILIZNG EMPTY FRUIT BUNCH (EFB). [Final Year Project]

Azman, Ahmad Imran (2016) CORROSION INHIBITION PERFORMANCE BY OCTYLMETHYLIMIDAZOLIUM- BROMIDE OMIBr ON API 5L X52 STEEL IN 1.0M H2SO4. [Final Year Project] (Submitted)

Azmei, Wan Sofia (2016) Characteristics Study of Biomass Fuel from Poultry Waste using Thermogravimetric Analysis. [Final Year Project] (Submitted)

Bahtiar, Muhammad Aiman (2016) Nano Polishing of Titanium Alloy with Ionic Liquid. [Final Year Project] (Submitted)

Baskaran, Prasanth Raj (2016) Experimental Study on Effects of Welding Parameters on Microstructure & Mechanical Properties of AA6061-T6 Material Joined by Friction Stir Welding (FSW). [Final Year Project] (Submitted)

Boon, Tan Han (2016) CFD Comparative Study of 3-D Compressible Flow Over Seamless and Canard Aerodynamic Flying Bodies. [Final Year Project] (Submitted)

CHEONG, WILLIES Y.D (2016) Thermal Efficiency Study of the Combustion Chamber Designed for Small Scale Gas Turbine Engine Transformed from Turbocharger. [Final Year Project] (Submitted)

Chai, Tan Huat (2016) Root Cause Failure Analysis (RCFA) Root Causes Categorization and Generation of Recommended Data for RCFA Investigation. [Final Year Project] (Submitted)

Che Engku Chik, Che Engku Mohd Khairi (2016) Towards Zero - Energy Commercial Offices by Utilizing Phase-Change Energy Storage Heat Exchanger to Replace Conventional Air Conditioning System. [Final Year Project] (Submitted)

Che Suliman, Muhammad Syahmie (2016) RESIDUAL STRENGTH ANALYSIS OF CORRODED PIPELINE WITH INTERACTING DEFECTS SUBJECTED TO INTERNAL PRESSURE AND LONGITUDINAL COMPRESSIVE STRESS. [Final Year Project] (Submitted)

Chi, Yew Lih (2016) Characterization and Properties of Powder Metallurgy Alumina-Iron and Alumina-Copper Ceramic Composites. [Final Year Project] (Submitted)

Chian, Cheah Zi (2016) Implementation and Justification of Innovated Three Lines Loop for Single and Multi- Phase Flows Studies. [Final Year Project] (Submitted)

Chin, Eileen Wong Wee (2016) A Study on the Fatigue Assessment of Offshore Steel Catenary Riser. [Final Year Project] (Submitted)

Chung Yang, Nigel Chuah (2016) Investigating the Effect of Drilling Parameters and Mud Rheology for the Flow of Yield Power Law Fluid through Annulus. [Final Year Project] (Submitted)

Danial, Hassan (2016) Study On Reduction In Heat Transfer From The Turbine To Compressor In A Turbocharger. [Final Year Project] (Submitted)

Eisa Musa, Ahmed Yosreldin (2016) AEROSTAT EFFECT ON UAV STABILITY. [Final Year Project] (Submitted)

Faris, Muhamad Arif (2016) CREEP ASSESSMENT OF REFORMER TUBE BY ULTRASONIC ATTENUATION AND MICROSTRUCTURE ANALYSIS. [Final Year Project]

Haji Hamzah, Muhamad Syamim (2016) Study of Crude Palm Oil Diesel Blend Emission on Diesel Engine. [Final Year Project] (Submitted)

Haji Rosihan, Siti Salmiah (2016) Corrosion Study on X65 Steel with Wax Deposition under Thermal Effect. [Final Year Project] (Submitted)

Hamada, Dah (2016) Drive system design for personal electric vehicle (PEV). [Final Year Project] (Submitted)

Haron, Hasrizal (2016) Integrated Matrix of 5S and Autonomous Maintenance for the Processing Industry. [Final Year Project] (Submitted)

Hassan, Abdullah Fahmi (2016) Evaluation of Hydrogen Embrittlement on Pipeline Steel Due to Cathodic Protection Overpotential. [Final Year Project] (Submitted)

Haur, Lim Chun (2016) Study on the Effect of Ultrasonic Wave Amplitude on Deemulsification of Crude Oil to enhance Production Process. [Final Year Project] (Submitted)

Hian, Kueh Seow (2016) Airflow study of a Split-Type outdoor unit subjected to near wall effect using Computational Fluid Dynamics (CFD)simulation. [Final Year Project] (Submitted)

Hong, Ho Yik (2016) Burst Strength Analysis of Composite Pressure Vessel using Finite Element Method. [Final Year Project] (Submitted)

Hsien Yoong, John Voon (2016) Effect of the Length of a Torpedo Anchor on Its Vertical Holding Capacity. [Final Year Project] (Submitted)

Huat, Beh Yong (2016) Measurement of Water in Oil Pipelines using Capacitance Method. [Final Year Project] (Submitted)

Hussein, Mohd Al Nazirul Mubin (2016) Electromagnetic Driven Wiper: Conceptual Study and Analysis. [Final Year Project] (Submitted)

Hussein Shah, Mohamad Izzudin (2016) Study of Micro-Explosion Phenomena of Various Water-in-Biodiesel Emulsion (WiBE) Using Visualization Technique. [Final Year Project] (Submitted)

ISMAIL, MOHAMED HAKAM HUSAIRI (2016) RESIDUAL STRENGTH ANALYSIS OF CORRODED PIPELINE WITH SINGLE DEFECT SUBJECTED TO INTERNAL PRESSURE AND LONGITUDINAL COMPRESSIVE STRESS. [Final Year Project] (Submitted)

Ibrahim, Maziah (2016) A Study Of Shock Absorption Performance Of Tapioca Starch As Cushioning Material For Packaging. [Final Year Project] (Submitted)

Ibrahim, Muhamad Farhan (2016) Failure Analysis of Hacksaw Blade. [Final Year Project]

Idris, Muhammad Khairi (2016) Effect of Sensor-Actuator Non-collocation to Dynamic Response of Flywheel Energy Storage System Supported by Active Magnetic Bearing. [Final Year Project] (Submitted)

Ismail, Mohd Fareid Fareez (2016) Study of Automatic Balancing for Flywheel-based Kinetic Energy Recovery System (KERS). [Final Year Project]

Ismail, Siti Syahirah (2016) Investigation of Performance On Low and High Temperature Nitrided 316L Austenitic Stainless Steel On Impact Test and Scratch Test. [Final Year Project] (Submitted)

JAMAL, IZZAT AMIR ZAFRI (2016) PERFORMANCE OF FREE-PISTON LINEAR GENERATOR BY USING COMPRESSED AIR. [Final Year Project] (Submitted)

JAMALUDDIN, FATIN NABILA (2016) CORRELATION ANALYSIS BETWEEN CHILLED WATER AND ELECTRICAL POWER DEMAND BASED ON GAS DISTRICT COOLING PLANT OPERATIONS. [Final Year Project] (Submitted)

JAYA RAMAN, THINESHRAAJ (2016) Study of Preferential Weld Corrosion in X52 Mild Steel with the Presence of Acetic Acid. [Final Year Project] (Submitted)

Jaini, Azmeer Zainurin (2016) Evaluation of “Rust Converter Paint” Mechanism Under Simulated Field Condition. [Final Year Project] (Submitted)

Jamil, Muhammad Akmal (2016) Study on the Effect of Syngas Fuel Temperature to the Performance of a Small-Scale Electrical Power Generator. [Final Year Project] (Submitted)

Jayakumar, Khuganeswaran (2016) Investigation of Organic Rankine Cycle Using Different Working Fluids for Conversion of Low Grade Heat Sources. [Final Year Project] (Submitted)

Jinal Ahbidin, Muhammad Firdaus (2016) A STUDY ON THE MECHANICAL EFFECTS OF GAS NITRIDING ON ALUMINIUM ALLOY 6061 FOR THE USE IN MOBILE PHONE CASING. [Final Year Project] (Submitted)

Jumali, Siti Nur Izzaidah (2016) Reliability, Availability and Maintainability (RAM) Analysis for Offshore High Pressure Compressor. [Final Year Project] (Submitted)

Kamalruzzaman, Muhammad Fadhullah (2016) Prevention of Evaporative Water Loss in Water Reservoir Dam. [Final Year Project]

Kardan, Ramtin (2016) Combustion Characteristics of a Curved-Cylinder Crank-Rocker Engine. [Final Year Project] (Submitted)

Khalid, Muhamad Fazillah (2016) Iridium Oxide pH Microsensor Based on Stainless Steel Wire for pH Mapping on Metal Surface. [Final Year Project]

Krishnamoorthy, Shasidaran (2016) Optimum Welding Parameters for Pipeline Welding Using Artificial Neural Network. [Final Year Project] (Submitted)

Lau , Kah Mun (2016) Investigation of Heat Transfer Losses to the Combustion Chamber Wall of a Linear Generator Engine. [Final Year Project] (Submitted)

Law , Tzee Sien (2016) Lean Process Improvement on Local Hospitals. [Final Year Project] (Submitted)

MOHAMED HISHAM, MOHAMED SYAKIR (2016) A STUDY OF PHYSICAL PROPERTIES & SHOCK ABSORPTION ABILITIES OF STARCH POLYMER FOAM AS CUSHIONING MATERIAL FOR PACKAGING. [Final Year Project] (Submitted)

MOHD PAUZI, AIDA KHALEEDA (2016) Rotor Dynamic Analysis of Centrifugal Compressor due to Liquid Carry Over. [Final Year Project] (Submitted)

MOHMAD @ FIKRI, FAEZ (2016) INVESTIGATION OF TITANIUM ADDITION ON PHYSICAL AND MECHANICAL PROPERTIES OF POWDER INJECTION MOLDED 316L STAINLESS STEEL PARTS. [Final Year Project] (Submitted)

Mahmoud, Ali Moghavvemi (2016) Investigation on the Phalange Contact Force for a 2 finger Pulley-Tendon Driven Robotic Hand. [Final Year Project] (Submitted)

Mat Tasir, Muhammad Hakim (2016) OPTIMAL DESIGN OF HELICAL COMPRESSION SPRINGS. [Final Year Project] (Submitted)

Mazlan, Mohamad Mizal Saiful Anuar (2016) Process Parameters Optimization of High Density Polyethylene (HDPE) Friction Stir Welded Plates. [Final Year Project]

Md Arif, Muhammad Nafiz Izzat (2016) Investigation Of The Critical Features Affecting The Condition Of Oil And Gas Pipeline. [Final Year Project] (Submitted)

Mhd Nasser, Asma‘ Khairunnisa‘ (2016) Development of Excel-Based Piping Vibration Assessment Model. [Final Year Project] (Submitted)

Mohamad @ Rusdi, Muhammad Faez Ezanee (2016) Simulation and Modelling of a Gas Separation System. [Final Year Project] (Submitted)

Mohamad Lutfi, Mohamad Ashraf (2016) Effects of Ball Milling Time on the Fire Performance Red Mud Intumescent Coating. [Final Year Project] (Submitted)

Mohamad Yusoff, Syaza Yasmin (2016) CFD Modeling of Thermoelectric Air Duct System for Cooling of Building Envelope. [Final Year Project] (Submitted)

Mohamed Yunus, Mohmed Azman (2016) Simulation of Parabolic Trough Collector (PTC) for Direct Steam Generation (DSG) under Malaysia Weather. [Final Year Project] (Submitted)

Mohammad Izani, Nik Mohd Hakim (2016) Analysis and Simulation of PDC Drill Bit Design In Mitigating Stick and Slip. [Final Year Project] (Submitted)

Mohammad Rabeek, Mohamed Tawfeek (2016) Development of a Model to Predict the Global Solar Radiation Using Statistical Techniques. [Final Year Project] (Submitted)

Mohammad Rafi, Mohammad Syafiq (2016) Aerodynamic Analysis on Small Race Car Body by using CFD Simulation. [Final Year Project] (Submitted)

Mohd Ali, Syazwani (2016) Studying the Parameters Which Affect Sprinkler Fire Protection System Performance in Buildings. [Final Year Project] (Submitted)

Mohd Arshad, Mohamad Hazrul Azli (2016) The Study of the Effects of Drilled Hole on Tensile Strength of Hybrid Fiber Reinforced Epoxy (HFRE) Composite. [Final Year Project] (Submitted)

Mohd Azmi, Muhamad Aizat Syafiq (2016) NITRIDING OF 2205 DUPLEX STAINLESS STEELS TO ENHANCE CORROSION RESISTANCE. [Final Year Project] (Submitted)

Mohd Eilham, Mohamad Anis (2016) Study on Low Boost Pressure Effect of Electric Turbocharger on Engine Performance. [Final Year Project] (Submitted)

Mohd Karim, Ariff Hakimy (2016) Design Improvement of Existing Slip-on Sprocket. [Final Year Project] (Submitted)

Mohd Nasir, Muhammad Ahnaf (2016) Investigating the Effects of Addition of Different Copper Amount in Fe-Cu-C by Powder Metallurgy. [Final Year Project] (Submitted)

Mohd Nazree, Muhammad Azlan Nasrin (2016) Reducing Re-Absorption Losses In Luminescent Solar Concentrators ( LSC’s) By Using Nanomaterials. [Final Year Project] (Submitted)

Mohd Rodzhan, Nur Syahirah (2016) Evaluation of Epoxy-Based Fire Retardant Basalt Fibre Reinforced Intumescent Coating with Aluminum Trihydrate (ATH) for Fire Retardancy Protection of Structural Steel. [Final Year Project]

Mohd Saiful Bahren, Mohd Danial (2016) Small Car Carbon Dioxide Emission Analysis Through Drive Cycle Patterns on Chassis Dynamometer. [Final Year Project]

Mohd Thulus, Shahmirul Azri (2016) Green Fuel: Improvement of Engine Performance using Water-in-Diesel Emulsion (WiDE) with a Small Percentage of Hydrogen. [Final Year Project] (Submitted)

Mohd Zian, Muhammad Danial (2016) A Study of Acoustic Properties of Coconut Coir and Vermiculite Composite as Noise Insulation in Vehicles. [Final Year Project] (Submitted)

Muhamad, Muhamad Fikri (2016) EFFECTS OF DRILLING GENERATED HEAT ON DELAMINATION IN GLASS FIBER REINFORCED EPOXY (GFRE) COMPOSITES. [Final Year Project]

Muosteut, Muosteufa (2016) Life Cycle Cost Comparison of Heat Recovery Steam Generator and Auxiliary Boiler. [Final Year Project] (Submitted)

N SETHAMBARAM, CARTHIKRAJA N SETHAMBARAM (2016) Numerical Simulation of Rock-Cutter Interaction in Drilling Operation Using ANSYS AUTODYN 3D. [Final Year Project] (Submitted)

NIK MAHAMED, NIK SAHIRA NAJIHA (2016) Development of Solid Fuel Briquette from Coal Waste. [Final Year Project] (Submitted)

NORDIN, AFIF AIMAN (2016) Comparative Study on Red Mud Modified Intumescent Coating. [Final Year Project] (Submitted)

Ngaing , Ing Kai (2016) Experimental Investigation of Engine Performance and Exhaust Emissions of DI Diesel Engine using various Water in Diesel Emulsion. [Final Year Project] (Submitted)

Nik Ahmad Ridzlan, Nik Aiemen Razieq (2016) Pipeline modelling for leak detection using pressure gradient method. [Final Year Project] (Submitted)

Nizam Shah, Muhammad A’izuddin (2016) Investigation on Grain Size Changes in Gamma Prime Precipitate on Varying Surface Location of IN738 Engine Turbine Blade. [Final Year Project] (Submitted)

Nizamuddin, Mohamed Fazlan (2016) Subsea Pipelines Health Prognostics Using Rate of Crack Propagation and Marco-Starkey, Cumulative Damage Theory. [Final Year Project] (Submitted)

Nor Azlan, Adam (2016) Failure Analysis of Broken Pump Shaft. [Final Year Project] (Submitted)

Nordin, Amzani Nazmi (2016) Performance Monitoring Analysis of Centrifugal Compressor Using Statistical Process Control. [Final Year Project]

Ntutumu Nsang, Dionisio Miguel (2016) Study on Reduction of Cooling Energy for Air Conditioning by Flexible Space Compartmentalization in Residential Houses. [Final Year Project] (Submitted)

Osmira, Nur Husna Anira (2016) Development of Markov Model for Piping System Reliability Analysis Subjected to Corrosion Under Insulation. [Final Year Project]

Othman, Mohamed Azeem (2016) Studies of structural properties of char from intumescent coating. [Final Year Project] (Submitted)

PING, KAM CHONG (2016) EXPERIMENTAL AND NUMERICAL INVESTIGATION ON THE ENHANCEMENT OF NATURAL UP DRAFTING IN A CHIMNEY. [Final Year Project] (Submitted)

Pang , Chang-Tze (2016) Investigation of Factors Affecting Performance of Solar Still. [Final Year Project] (Submitted)

Paramaguru, Dhanis (2016) CFD Simulation of Temperature and Humidity Distribution over Large Manufacturing Facilities. [Final Year Project] (Submitted)

Ping, See Itt (2016) Investigation of Charging and Discharging Process in a Rotating Latent Heat Storage. [Final Year Project] (Submitted)

Rabie, Fatthie Khairullah Hishyam (2016) INFLUENCE OF TEMPERATURE ON STABILITY OF ALUMINUM FOAM CELL WALL DURING FOAMING PROCESS. [Final Year Project]

Ragab Mousa, Mahmoud Shehata AbdAlfatah (2016) Experimental Evaluation of Zero Energy PG Office Under Natural and Forced Ventilation. [Final Year Project] (Submitted)

Ramachanderan, Mageshwaran (2016) Development and Char Morphology Analysis of Siloxane Based Intumescent Fire Retardant Coatings. [Final Year Project] (Submitted)

Ramli, Muhammad Nurshafiq (2016) Analyze Performance of Torque Boosting Device. [Final Year Project] (Submitted)

Roslan, Rabiatul Adawieah (2016) TORREFACTION OF EMPTY FRUIT BUNCH IN BIOMASS COMBUSTION GAS. [Final Year Project]

Ruslan, Ibtihal (2016) Parametric Study on Effectiveness of Heat Exchangers for Primary and Secondary Chilled Water Distribution Lines of an Academic Complex. [Final Year Project] (Submitted)

SAIPUDDIN, NURAMALINA (2016) PERFORMANCE ASSESSMENT OF AN OFF DESIGN AIR FINNED COOLER. [Final Year Project] (Submitted)

SALEM BASYOAL, OMAR AHMED (2016) Prediction of Cooling Load of a Glazed Building under Malaysia Weather Conditions. [Final Year Project] (Submitted)

SAZALI, SYAZWAN (2016) Vortex Induced Vibration (VIV) Reduction Measure on Dimpled Concrete Coated Pipeline. [Final Year Project] (Submitted)

Sahardin, Abdul Malek (2016) Fabrication of Iridium Oxide Screen Printed pH Sensor for Microbial Induced Corrosion Monitoring Application. [Final Year Project] (Submitted)

Saiful Bahri, Laila Izyana (2016) Thermodynamic Analysis of Organic Flash Cycle (OFC) for Power Generation from Low to Medium Heat Sources. [Final Year Project] (Submitted)

Saw , Nixon Hong Ken (2016) FPSO Mooring Line Fatigue. [Final Year Project] (Submitted)

Sayid Basri, Sayid Izwan (2016) Study on Irreversible and Coefficient Performance of Double Effect Lithium Bromide and Water Steam Absorption Chiller. [Final Year Project] (Submitted)

Shahrul Amar, Abdul Qayyum (2016) Investigation on the Dynamic Response of a Horizontal Axis Wind Turbine with Active Blade Pitch Control. [Final Year Project] (Submitted)

Shamsudin, Muhammad Fasha Haiqal (2016) Computational Fluid Dynamics (CFD) Study of Gas Separation Process for High Pressure Horizontal Separator. [Final Year Project] (Submitted)

Sheng, Caleb Ng Zhu (2016) Assessment of the Uncoated Carbide inserts in end milling of Titanium Alloy Ti-6AI-4V. [Final Year Project] (Submitted)

Sheng, Jason Ngu Kai (2016) Preliminary Study of Renewable Pico Hydro Electrification Schemes to Improve Current Electrification Method in Royal Belum. [Final Year Project] (Submitted)

Sheng, Ong Kai (2016) PDC Bit Hydraulic and Mud Rheological Simulation to Model Pressure Drop across Bit. [Final Year Project] (Submitted)

Shiun, Onn Wei (2016) INVESTIGATING THE OPTICAL LOSSES OF A SECOND REFLECTOR IN A BEAM DOWN POWER TOWER. [Final Year Project] (Submitted)

Shuib, Siti Suhaili (2016) Simulation Study on Combustion Characteristics of Water Tube Boiler with Different Type of Fuel. [Final Year Project] (Submitted)

Subramaniam, Ramesh (2016) Experimental Study of Paraffin Wax Precipitation and Its Effect on Corrosion Behavior of Carbon Steel Pipeline. [Final Year Project] (Submitted)

Thomas Martin, Diana Lia (2016) Process Improvement in Healthcare through the Application of Lean Concepts. [Final Year Project] (Submitted)

Torng, Hea Yih (2016) On-Bottom Stability Study of Non-Metallic Pipeline Due To Hydrodynamic Loadings. [Final Year Project] (Submitted)

Wan Johari, Wan Muazzam (2016) Gasification of Waste Leaf Pallets in a Downdraft Gasifier for Off-grid Power Generation. [Final Year Project] (Submitted)

Wan Nadhari, Wan Noor Azleen (2016) Mechanical Properties of “Mengkuang” Fibre Reinforced Composite. [Final Year Project] (Submitted)

Wan Rahim, Wan Abdul Azeem (2016) Real Time Algorithm of Wear Detection. [Final Year Project] (Submitted)

Wei, Wong Hoong (2016) Setting Up a Remote Accessing of a PV Plant and Its Analysis. [Final Year Project] (Submitted)

Wei Ren, Ivan Gan (2016) Numerical Simulation of Extreme Wave Loading on Deep-water SPAR Platforms using the SPH Method. [Final Year Project] (Submitted)

Wolian, Duku Paul (2016) Characterization and Properties of Powder Metallurgy Alumina-Copper Ceramic Composites. [Final Year Project] (Submitted)

Yahaya, Mohd Afzal Syahin (2016) Mechanical Properties and Corrosion Resistance of Nitrided Austenitic Stainless Steel (ASS) 316L at Low Temperature. [Final Year Project] (Submitted)

Yang, Chong Yew (2016) Texture Surface Analysis of Hydrodynamic Journal Bearing. [Final Year Project] (Submitted)

Yaw, Yong Hong (2016) Single Phase Turbulent Flow Regime Characterization Using Image Processing Techniques. [Final Year Project] (Submitted)

Yegarajoo, Seridheren (2016) Design Smart In-Field Liner Hose IFL for Offshore Petroleum Pipeline Rehabilitation. [Final Year Project] (Submitted)

Yew , Jia-Wei (2016) EXPERIMENTAL AND NUMERICAL INVESTIGATION OF THE TOP PLATE INFLUENCE ON THE PERFORMANCE OF SOLAR VORTEX ENGINE. [Final Year Project] (Submitted)

Yousof Kunju, Mohammad Fadzil (2016) Nitriding of A316 Stainless Steel Pipe with Improvement of Corrosion Resistance. [Final Year Project] (Submitted)

Yusni, Alif Aiman (2016) Heat Transfer Study of Helically Coiled Tube Heat Exchanger. [Final Year Project]

Zainalabidin, Muhammad Amirul Luthfi (2016) Effect of Agitated Turbulence on Demulsification of Crude Oil Emulsions in Production Separator. [Final Year Project] (Submitted)

Zakaria, Mohd Zakwan (2016) Enhancement Of Strength And Fire Resistance Properties Of Intumescent Coatings By Basalt Fibre. [Final Year Project] (Submitted)

Zawawi, Muhammad Helmi Zin (2016) Thermodynamic Modelling of Organic Rankine Cycle (ORC) for Waste Heat Recovery of a Gas Turbine Engine. [Final Year Project] (Submitted)

Zul Azri, Azril Danial (2016) Simulation Study Effect of Fine Particle on Choke Valve by Using Computational Fluid Dynamic (CFD). [Final Year Project] (Submitted)

Zulkafli, Muhammad Harith (2016) Investigation of Nanofluids Selection for Solar Thermal Collectors. [Final Year Project] (Submitted)

Zulkarnain, Ahmad Fahim (2016) Optimize Build Orientation for 3D Printing to Minimize Build Time and Support Structure. [Final Year Project] (Submitted)

Zulkifli, Muhammad Zulfadli (2016) Dropped Object Protection Modelling for Subsea Equipment. [Final Year Project] (Submitted)

Zulkipli, Muhammad Shamil (2016) Performance Study on Hot Air Recovery for Solar Thermoelectric Cooler System. [Final Year Project]

a/l Asokan, Arravinthan (2016) Mechanical Properties and Performance Evaluation of Polypropylene (PP)/Lalang Grass Composite. [Final Year Project] (Submitted)

a/l Gurdial Singh, Dalvinder Singh (2016) Performance Analysis of Ice Crystals Collection Mechanism in a Freezing Desalination Process. [Final Year Project] (Submitted)

a/l Jeyaprakasam, Gajendran (2016) Study of Free Falling Particle in Viscous Fluid. [Final Year Project] (Submitted)

Past Year Examination Question

Past Year Exam Question (2016) MBB2094 MCB3013 MDB3013 CONTROL SYSTEMS. [Past Year Examination Question]

Past Year Exam Question (2016) MBB4133 MCB4123 VEHICLE DYNAMICS. [Past Year Examination Question]

Past Year Exam Question (2016) MCB1012 MDB1022 INTRODUCTION TO MATERIAL SCIENCE. [Past Year Examination Question]

Past Year Exam Question (2016) MCB1033 MDB1033 ELECTRICAL POWER AND MACHINES. [Past Year Examination Question]

Past Year Exam Question (2016) MCB1053 STATICS. [Past Year Examination Question]

Past Year Exam Question (2016) MCB2013 MDB2013 FLUID MECHANICS I. [Past Year Examination Question]

Past Year Exam Question (2016) MCB2043 MDB2043 DYNAMICS. [Past Year Examination Question]

Past Year Exam Question (2016) MCB2053 FLUID MECHANICS II. [Past Year Examination Question]

Past Year Exam Question (2016) MCB2053 MDB2053 FLUID MECHANICS II. [Past Year Examination Question]

Past Year Exam Question (2016) MCB3023 MDB3023 ENGINEERING MATERIALS. [Past Year Examination Question]

Past Year Exam Question (2016) MCB3043 MDB3043 MECHANICS OF MACHINES. [Past Year Examination Question]

Past Year Exam Question (2016) MCB4123 VEHICLE DYNAMICS. [Past Year Examination Question]

Past Year Exam Question (2016) MCB4223 ENERGY MANAGEMENT. [Past Year Examination Question]

Past Year Exam Question (2016) MCB4223 ENERGY MANAGEMENT. [Past Year Examination Question]

Past Year Exam Question (2016) MCB4233 REFRIGERATION AND AIR CONDITIONING. [Past Year Examination Question]

Past Year Exam Question (2016) MCB4233 REFRIGERATION AND AIR-CONDITIONING. [Past Year Examination Question]

Past Year Exam Question (2016) MCB4433 FAILURE ANALYSIS AND NON DESTRUCTIVE EXAMINATION. [Past Year Examination Question]

Past Year Exam Question (2016) MCB4433 FAILURE ANALYSIS AND NON-DESTRUCTIVE EXAMINATION. [Past Year Examination Question]

Past Year Exam Question (2016) MCB4513 FLOW ASSURANCE IN PIPELINES AND FLOW-LINES. [Past Year Examination Question]

Past Year Exam Question (2016) MCB4623 PLANT EQUIPMENT DESIGN. [Past Year Examination Question]

Past Year Exam Question (2016) MCB4623 PLANT EQUIPMENT DESIGN. [Past Year Examination Question]

Past Year Exam Question (2016) MCB4623 PLANT EQUIPMENT DESIGN. [Past Year Examination Question]

Past Year Exam Question (2016) MDB2023 MECHANICAL ENGINEERING THERMODYNAMICS I. [Past Year Examination Question]

Past Year Exam Question (2016) MDB2034 MCB2034 MBB2043 SOLID MECHANICS. [Past Year Examination Question]

Past Year Exam Question (2016) MDB2063 MECHANICAL ENGINEERING THERMODYNAMICS II. [Past Year Examination Question]

Past Year Exam Question (2016) MDB3033 MCB3033 MBB3033 HEAT TRANSFER. [Past Year Examination Question]

Past Year Exam Question (2016) MDB3053 NUMERICAL METHODS. [Past Year Examination Question]

Past Year Exam Question (2016) MDB3073 MCB3073 MANUFACTURING TECHNOLOGY II. [Past Year Examination Question]