Items where Department / MOR is "Mechanical" and Year is 2011

Group by: Creators | Item Type | No Grouping
Jump to: | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | R | S | T | U | V | W | Y | Z
Number of items: 284.

Abdullah, Mohd Aimran (2011) STRESS ANALYSIS ON MECHANICAL SEAL (SINGLE SEAL). [Final Year Project] (Unpublished)

Amir, Nadiah (2011) STUDY INTO THE EFFECT OF CUTTING SPEED ON THE SURFACE ROUGHNESS, ROUNDNESS, TOOL WEAR AND CHIP FORMATION DURING LATHE CUTTING OPERATION. [Final Year Project] (Unpublished)

Anis, Azarudeen (2011) Design of Two-Stages Charging of Sensible Thermal Energy Storage. [Final Year Project] (Unpublished)

Ishak, Siti Nadiah (2011) Spectrum Analysis of Linear Time Invariant Gyroscopic System. [Final Year Project] (Unpublished)

Ismail, 'Izzuddin (2011) Value Analysis for Brake Disc Materials- Case of cast iron to composite. [Final Year Project] (Unpublished)

SUBRAMANIAM, SHALINI (2011) Corrosion Study of Nitrided X-52 Carbon Steel in C02 Environment. [Final Year Project] (Unpublished)

WAN ZAHARUDDIN, WAN AMALINA BT WAN ZAHARUDDIN (2011) CHARACTERIZATION AND PROPERTIES OF VERMICULITE ON WATER-BASED ACRYLIC FIRE RETARDANT COATING. Masters thesis, UNIVERSITI TEKNOLOGI PETRONAS.

A

A/L Harbinder Singh, Harnamdav Singh (2011) STUDY ON CHAR EXPANSION AND HEAT SIDELDING OF INTUMESCENT COATING BASED ON INORGANIC FILLERS. [Final Year Project] (Unpublished)

ABD MAJID, ABDUL HAFIZ (2011) SPRAY CHARACTERISTIC OF GASOHOL BLENDS USING OPTICAL MEASUREMENT. [Final Year Project] (Unpublished)

ABD RAZAK, MUHAMMAD ZHARIF (2011) The Effect of Current to Hardness, Microstructure and Toughness in Shielded Metal Arc Welding of Carbon Steel and Stainless Steel 304. [Final Year Project] (Unpublished)

ABDUL RAHMAN, MOHD SYAFIQ (2011) CONCEPTUAL DESIGN AND FEASIBILITY ANALYSES OF ROBOTIC SYSTEM FOR AUTOMATED PIGGING OPERATION. [Final Year Project] (Unpublished)

ABDUL RAZAK, MUHAMMAD RIDHWAN (2011) DESIGN AND FABRICATION OF A RACING KART FOR BOSCH POWER TOOLS ASIA CORDLESS RACE 2011 (CHASSIS FRAME AND STEERING SYSTEM). [Final Year Project] (Unpublished)

ABU SAMAH, IZATUL NADIA (2011) Study on Wet Method Mechanism for Producing Tronoh's Silica Sand Fine Particles. [Final Year Project] (Unpublished)

ABU SAMAH, MUHAMAD ASRI (2011) MINERAL DEVICED FROM FINE CLAY ISOLATED FROM POTTER WASP NEST COLLECTED FROM UNIVERSITI TEKNOLOGI PETRONAS MAIN HALL. [Final Year Project] (Unpublished)

ABU SAMAR, MUHAMAD ASRI (2011) Mineral Derived from Fine Clay Isolated from Potter Wasp Nest CoUected from Universiti Teknologi PETRONAS (UTP) Main Hall. [Final Year Project] (Unpublished)

ABU TALIB, MUHAMMAD HAFIZ (2011) STUDY ON THE CHARACTERIZATION OF SILICA SAND NANOPARTICLES-IRON BASED COMPOSITES (Fe-Si02) USING NITROGEN ATMOSPHERE AS SINTERING ENVIRONMENT. [Final Year Project] (Unpublished)

AHMAD HASNULNAIM BIN CHE KAMARUDDIN, AHMAD HASNULNAIM (2011) EFFECT OF ENERGY RECOVERY ON THE HOISTING CRANE ADAPTING CLOSED LOOP HYDRAULIC HOISTING SYSTEM. [Final Year Project] (Unpublished)

AHMAD MAJDI, KHAIRUL NAZMI (2011) PERFORMANCE IMPROVEMENT OF PHOTOVOLTAIC PANELS THROUGH MITIGATION OF SURFACE TEMPERATURE COOLING AND DEBRIS REMOVAL. [Final Year Project] (Unpublished)

AKBAR, JASMAINE MARSELLA (2011) EFFECTS OF DRILLING PARAMETERS ON HOLE INTEGRITY WHEN DRILLING HYBRID FIBER COMPOSITE HALF CYLINDERS. [Final Year Project] (Unpublished)

AL RIZA, DIMAS FIRMANDA (2011) SIZING OPTIMIZATION OF STANDALONE PHOTOVOLTAIC SYSTEM FOR RESIDENTIAL LIGHTING. Masters thesis, Universiti Teknologi Petronas.

ANBESE, YOHANNES TAMIRAT (2011) EARLY FLAME CHARACTERISTIC STUDY IN A LEAN CNG DI COMBUSTION. PhD. thesis, UNIVERSITI TEKNOLOGI PETRONAS.

AUNG MYINT OO, AUNG (2011) Knowledge Based Management For Rotating Equipment Diagnostics. [Final Year Project] (Unpublished)

AUNG NYEIN HAN, AUNG NYEIN (2011) Empirical Modeling for Diffusion of Nitrogen into AISI 430 Ferritic Stainless Steel. [Final Year Project] (Unpublished)

AUNG NYEIN HAN, AUNG NYEIN (2011) Empirical Modeling for Diffusion of Nitrogen into AISI 430 Ferritic Stainless Steel. [Final Year Project] (Unpublished)

Abang Usop, Dayang Farhana Syafiah (2011) The Effects of Recycled Polypropylene/Wood Flour (r-PPIWF) Composites with and without Coupling Agent on Mechanical Properties. [Final Year Project] (Unpublished)

Abd Majid, Zulfadhli (2011) Performance Investigation of Wind Rotor in Open and Bounded Environments. [Final Year Project] (Unpublished)

Abd Razak, Mohd Ariffan (2011) Assessment on Design for Manufacturing (DFM) and Design for Assembly (DFA) of a Centrifuge. [Final Year Project] (Unpublished)

Abd. Rahni, Ashraf Aizzuddin (2011) Energy Audit of Sewage Treatment Plants. [Final Year Project] (Unpublished)

Abdul Hafiz Bin Abd Majid, Abdul Hafiz (2011) Spray Characteristic of Gasohol Blends Using Optical Measurement. [Final Year Project] (Unpublished)

Abdul Hafiz Bin Abd Majid, Abdul Hafiz (2011) Spray Characteristic of Gasohol Blends Using Optical Measurement. [Final Year Project] (Unpublished)

Abdul Halim, Anis Farhana (2011) A Study on Centrifugal Compressor Performance and Developing Compressor Performance Analysis Software. [Final Year Project] (Unpublished)

Abdul Rahman Bin Mohd Zafrullah, Abdul Rahman (2011) Tribological Properties Analysis on Nitrided AISI 316L Stainless Steel. [Final Year Project] (Unpublished)

Abdul Rashid, Mohd Wafiuddin (2011) FINITE ELEMENT ANALYSIS OF RESIDUAL STRESSES IN 316 STAINLESS STEEL PIPELINES SMAW WELDING. [Final Year Project] (Unpublished)

Abdul Rashid, Nurlianah (2011) Variation of High Temperature Gas Nitriding Time on Duplex Stainless Steels. [Final Year Project] (Unpublished)

Abdul Rasid, Muhammad Ridhwan (2011) Development of A Model for Technical and Commercial Evaluation of Rotating Equipment for Offshore Plant. [Final Year Project] (Unpublished)

Abdul Razak, Mohamad Anas Najmi (2011) Study on the Effect of Annealing Temperature on the Compressibility and Microscopic Structure of Pure Graphite. [Final Year Project] (Unpublished)

Abdul Wahab, Mohamad Husaini (2011) Study on Epoxy Mastic Coating of Submerge Structure. [Final Year Project] (Unpublished)

Abdul Wahab, Mohamad Husaini (2011) Study on Epoxy Mastic Coating of Submerge Structure. [Final Year Project] (Unpublished)

Abu Bakar, Mohd Redzuan (2011) Palm Oil Fronds as Alternative Source of Raw Material to Produce Pulp and Paper. [Final Year Project] (Unpublished)

Ahmad, Nurul Najat (2011) Study of the Microstructure of the Gas Turbine Internal Blade. [Final Year Project] (Unpublished)

Ahmad, Rabiatul Adawiyah (2011) Integrated Talent Management System for Customer Service Workforce. [Final Year Project] (Unpublished)

Ahmad Lukman, Muhammad Amirul Asri (2011) Investigation of The Natural Convection Heat Transfer in Deep Wellbore. [Final Year Project] (Unpublished)

Ahmad Radzi, Ahmad Khalil (2011) Study on Wonn Defect in 6061 Aluminum Alloy Friction Stir Welded Plates. [Final Year Project] (Unpublished)

Ahmad Sabri, Shahir (2011) Effect Of The Internal Fluid Flow In The Glass Fibre Reinforced Plastic (GFRP) Pipe Dynamic. [Final Year Project] (Unpublished)

Alehan, Muhammad Nazree (2011) Study on Improvement of Cooling Energy and Thermal Comfort of Klinik Pergigian Batu Gajah. [Final Year Project] (Unpublished)

Alias, Mohd Amirul Mukminin (2011) Study of Adhesive Strength in Polymer Plate Heat and Mass Exchanger. [Final Year Project] (Unpublished)

Alias, Mohd Hazrul Azam (2011) Design of a Powertrain System for Simple Vehicle. [Final Year Project] (Unpublished)

Aminah Syahidah Bt Mohd Yusuff, Aminah Syahidah (2011) Study on the Effect of Thermal Stability of Corrosion Inhibitor. [Final Year Project] (Unpublished)

Aminudin, Ahmad Shakir (2011) Burst pressure estimation of corroded pipeline with interacting defects using FEA. [Final Year Project] (Unpublished)

Amirrudin, Muhammad Munzir (2011) Effects of Sa 2 and Sa 2.5 Blast Cleaning Surface Preparation on the Adhesion and Corrosion Protection Properties of Coating. [Final Year Project] (Unpublished)

Anas, Atika Illyani (2011) Study on Removal of Particles from Used Turbine Oil. [Final Year Project] (Unpublished)

Arthit Saengchot A/L Chali, Arthit (2011) Prediction of Remaining Useful Life for Service-Exposed Industrial Turbine Blade. [Final Year Project] (Unpublished)

Awang, Norhazini (2011) The comparison between C02/NH3 and C0~1234yf for optimal condensing temperature in cascade refrigeration systems. [Final Year Project] (Unpublished)

Ayoub, Abi Aiman (2011) A Study of Energy Recovery Potential from Domestic Sewage Sludge. [Final Year Project] (Unpublished)

B

BELACHEW, CHANYALEW TAYE BELACHEW (2011) RESIDUAL STRENGTH ASSESSMENT OF CORRODED PIPELINES. PhD. thesis, UNIVERSITI TEKNOLOGI PETRONAS.

Basharuddin, Muhammad Syahir (2011) Nitriding of X-52 Carbon Steel: Mechanical Characterization. [Final Year Project] (Unpublished)

C

CHE BAHARUM, CHE MOHD HASHRUL (2011) CHARACTERIZATION OF WASTE FROM THE PETROCHEMICAL INDUSTRY. [Final Year Project] (Unpublished)

Cassim, Sameer (2011) Design of a Multi-Staged Swirling Fluidized Bed. [Final Year Project] (Unpublished)

Chan, Wei Shin (2011) Experimental Characterization of Solid Biomass-Coal Mixture Combustion. [Final Year Project] (Unpublished)

Che Ghazali, Mohd Atiqullah (2011) Study on Drilling Fluid Using Electrical Capacitance Tomography (ECT). [Final Year Project] (Unpublished)

Che Kamaruddin, Ahmad Hasnulnaim (2011) Effect of Energy Recovery on the Hoisting Crane Adapting Closed Loop Hydraulic Hoisting System. [Final Year Project] (Unpublished)

Choon Lin, Voon (2011) Environmental Impact of Gas District Cooling: A Case Study of a Small Cogeneration Plant. [Final Year Project] (Unpublished)

Christine Engelbert, Christine (2011) Study on Heat Treatment Effect on Corrosion of API 5L X52 steel in CO2 Environment. [Final Year Project] (Unpublished)

D

DONG, WEE TIAT (2011) Extended Numerical Analysis on Gas Turbine Blade Cooling. [Final Year Project] (Unpublished)

DZULKAFLI, HANNATUL HAZWANI (2011) ENHANCEMENT THE PERFORMANCE OF THE INTUMESCENT COATING BY INCORPORATING TALC AS FLAME RETARDANT FILLER. Masters thesis, UNIVERSITI TEKNOLOGI PETRONAS.

Daud, Amalina (2011) Modeling and Analysis of Dry Low Emission Combustor Discharge Nozzle Material & Structure for Rolls Royce Industrial RB211 Gas Turbine. [Final Year Project] (Unpublished)

Daud, Mohd Hafizudin (2011) Comparative Study of Spray of Different Liquids. [Final Year Project] (Unpublished)

Dayang Farhana Syafiah Binti Abang Usop, Dayang Farhana (2011) The Effects of Recycled Polypropylene/Wood Flour (r-PP/WF) Composites with and without Coupling Agent on Mechanical Properties. [Final Year Project] (Unpublished)

E

Elliza, Amir Zhafri (2011) Computer Aided Design of FPSO Vessel for Deepwater Operations. [Final Year Project] (Unpublished)

Engelbert, Christine (2011) Study on Heat Treatment Effect on Corrosion of API 5L X52 steel in C02 Environment. [Final Year Project] (Unpublished)

F

FIRMANTO, HUDIYO (2011) REACTION LAYERS IN DIFFUSION BONDED OF SIALON TO FERRITIC STEEL. PhD. thesis, UTP.

Farid Fawzy Fathy Taha Ellakany, Farid Fawzy (2011) Preliminary Drying of Oil Palm Fronds Using Concentrated Solar Thermal Power. [Final Year Project] (Unpublished)

G

Gunnasegaran, Paarthiban (2011) Loss Circulation Material in Drilling Fluid. [Final Year Project] (Unpublished)

Gunnasegaran, Paarthiban (2011) Loss Circulation Material in Drilling Fluid. [Final Year Project] (Unpublished)

H

HAFIZ!, MOHD NORSHAHRUL (2011) DESIGN OF HEAT EXCHANGER FOR THE GAS TURBINE AIR INLET COOLING. [Final Year Project] (Unpublished)

HAMIZOL, MUHAMMAD SYAHMI (2011) STUDY OF BONDING STRENGTH OF INORGANIC FILLERS BASED INTUMESCENT COATING. [Final Year Project] (Unpublished)

HARON, MOHAMMAD FARHAN (2011) ENGINE SELECTION AND DESIGN OF POWERTRAIN FOR SIMPLE VEHICLE FOR OPTIMUM FUEL CONSUMPTION. [Final Year Project] (Unpublished)

HASSAN, CIK SUHANA BINTI (2011) STRESS ANALYSIS USING FINITE ELEMENT METHOD ON SIALON/AISI 430 FERRITIC STAINLESS STEEL JOINT. Masters thesis, UTP.

HILMI, MOHD AFIFIE (2011) ALLOWABLE CORRODED PIPE PRESSURE ESTIMATION DUE TO INTERNAL PRESSURE AND LONGITUDINAL COMPRESSIVE STRESS. [Final Year Project] (Unpublished)

HOR, WEI VERN (2011) FUNCTIONALIZATION AND CHARACTERIZATION OF MULTI-WALLED CARBON NANOTUBES/POLYPROPYLENE NANOCOMPOSITE. [Final Year Project] (Unpublished)

Haji Karim, Muhammad Fadhil (2011) Study on Characteristics of Syngas Derived From Various Biomasses. [Final Year Project] (Unpublished)

Haji Mohamed Zabidi, Norazreen (2011) Modelling of Polymer Melt During Injection Moulding: Influence of Injection Pressure. [Final Year Project] (Unpublished)

Harun, Habibah (2011) Defect Study ofPCBA at Manufacturing Company. [Final Year Project] (Unpublished)

Hasamuddin, Salman (2011) MAINTAINABILITY ANALYSIS OF A BATTERY FOR A PERSONAL TRANSPORTER. [Final Year Project] (Unpublished)

Hasan, Mohamad Zamri (2011) RELIABILITY ASSESSMENT OF A MULTI-STATE SYSTEM USING DISCRETE TIME MARKOV CHAIN. [Final Year Project] (Unpublished)

Hashim, Mohd Hafizuddin (2011) FINITE ELEMENT SIMULATION OF RESIDUAL STRESSES IN DIFFERENT COLD-EXPANDED PLATE TIDCKNESS. [Final Year Project] (Unpublished)

Hashim, Muhammad Khairuddin (2011) Simplified Creep Assessment of Catalyst Tube. [Final Year Project] (Unpublished)

Helder Sitoi, Helder (2011) SOLAR POWERED ADSORPTION COOLING SYSTEM USING ACTIVATED MEDIA FOR EQUATORIAL HUMID CLIMATE. [Final Year Project] (Unpublished)

Husni, Muhammad Umar Rijaluddeen (2011) Development Length for Non-Newtonian Laminar Flow in Circular Pipe. [Final Year Project] (Unpublished)

Hussain, Haizatul Hafizah (2011) Design and Analysis of Flywheel Energy Storage System's Structure. [Final Year Project] (Unpublished)

I

IDRIS, MOHD HAFIZ HIZAMI (2011) Thermal Shrinkage and Gas Void Formation of Waxy Crude Oil-Gas Voids Study. [Final Year Project] (Unpublished)

IFFA, EMISHAW DANDENA IFFA (2011) QUANTITATIVE SCHLIEREN MEASUREMENT OF 3 DIMENSIONAL TEMPERATURE, CONCENTRATION AND VELOCITY FIELDS IN A GAS FLOW. PhD. thesis, UNIVERSITI TEKNOLOGI PETRONAS.

Ibrahim, Mohd Madzhir (2011) Dynamic Characteristics of a Hybrid Composite Drive Shaft for Automotive Application. [Final Year Project] (Unpublished)

Ishak, Mohamad Adib (2011) Design and Implementation of Control System for Fuel Feeding. [Final Year Project] (Unpublished)

Ishak, Muhamad (2011) The Effects of Friction Stir Welding (FSW) of Polypropylene (PP) on Tensile Strength. [Final Year Project] (Unpublished)

Ismail, Mohammad Afiq Syazwan (2011) Friction Stir Welding of High Density Polyethylene. [Final Year Project] (Unpublished)

J

JA'AFAR, ASYRAF (2011) EFFECT OF TOTAL OUTDOOR ENVIRONMENTAL EXPOSURE ON SURFACE CRAZING OF RUBBER STOPPER MATERIAL AT THE LATITUDE OF 4.417 AND LONGTITUDE OF 100.983 IN BANDAR SERI ISKANDAR AREA. [Final Year Project] (Unpublished)

JASMAINE MARSELLA BINTI AKBARJASMAINE MARSELLA BINTI AKBAR, JASMAINE (2011) EFFECTS OF DRILLING PARAMETERS ON HOLE INTEGRITY WHEN DRILLING HYBRID FIBER COMPOSITE HALF CYLINDERS. [Final Year Project] (Unpublished)

JEMAAT, MUHAMAD RIDZUAN (2011) A COMPARATIVE STUDY BETWEEN TWO RESIN INFUSION STRATEGIES IN THE MANUFACTURING OF POLYMER COMPOSITE WIND TURBINE BLADE VIA RESIN INFUSION PROCESS. [Final Year Project] (Unpublished)

JOHAN, AHMAD SY AMIL (2011) Mechanical Properties of Polypropylene/Polycarbonate Blends. [Final Year Project] (Unpublished)

JOHAN, AHMAD SYAMIL (2011) Mechanical Properties of Polypropylene/Polycarbonate Blends. [Final Year Project] (Unpublished)

JOHAR, AIMI NURLIYANA (2011) STUDY ON TENSILE AND FLEXURAL PROPERTIES OF RECYCLED HIGH DENSITY POLYETHELENE/SAWDUST COMPOSITES. [Final Year Project] (Unpublished)

Jamaludin, Ahmad Ariff (2011) A Study of Energy Recovery Potential from Poultry Industry Waste Sludge. [Final Year Project] (Unpublished)

Jamaludin Alias, Nur 'Atikah (2011) Failure Analysis on Heat Exchanger Tube Bundle Leakage. [Final Year Project] (Unpublished)

Javier Teo Han Seong, Javier (2011) Dynamic Analysis of Suspension Bridge. [Final Year Project] (Unpublished)

Jebar, Mohd. Nazri (2011) Design and Fabrication of the Body for Fuel Saving Prototype Car Which Caters For Aerodynamics Purposes. [Final Year Project] (Unpublished)

Jin Ming, Goh (2011) Experimental Investigation of Savonius Wind Rotors in Open and Bounded Flows. [Final Year Project] (Unpublished)

Johani, Syakir Saniy (2011) Design of a High Temperature Steam Generator System using Solar Energy for a Biomass Torrefaction Reactor. [Final Year Project] (Unpublished)

K

KAMSUL, MOHD SYAHMIE (2011) SMALL ENGINE PERFORMANCE OPTIMIZATION FOR POWER AND FUEL CONSUMPTION IMPROVEMENT OF A SIMPLE VEHICLE. [Final Year Project] (Unpublished)

KHOO, BOO KEAN (2011) Mathematical modeling, control and simulation of petroleum distillation column. Masters thesis, UTP.

KHOO , KHOO SZE WEI (2011) DEVELOPMENT OF AN OPTICAL STRAIN MEASUREMENT METHOD. Masters thesis, UNIVERSITI TEKNOLOGI PETRONAS.

Kee Lian Soon, Kee Lian (2011) Experimental Study of Oil Palm Biomass Waste Mixture for Energy Potential. [Final Year Project] (Unpublished)

Khairul Nazmi Bin Ahmad Majdi, Khairul Nazmi (2011) Performance Improvement of Photovoltaic Panels Through Mitigation of Surface Temperature Cooling and Debris Removal. [Final Year Project] (Unpublished)

L

LEE, KUO CHUN (2011) STUDY ON THE EFFECTIVENESS OF IONIC LIQUID AS LOW DOSAGE HYDRTAE INHIBITOR FOR FLOW ASSURANCE IN PIPELINE. [Final Year Project] (Unpublished)

LEE, KUO CHUN (2011) Study on the Effectiveness of Ionic Liquid as Low Dosage Hydrate Inhibitor (LDID) for Flow Assurance in Pipeline. [Final Year Project] (Unpublished)

LEE KUO , CHUN (2011) Study on the Effectiveness of Ionic Liquid as Low Dosage Hydrate Inhibitor (LDHI) for Flow Assurance in Pipeline. [Final Year Project] (Unpublished)

Lau, Chung Teck (2011) Online Purification of Contaminated Lubricant. [Final Year Project] (Unpublished)

Long Zainudin, Long Zulkamaen (2011) Design of an Optical Box for Laser Doppler Anemometer Measurements. [Final Year Project] (Unpublished)

ldris, Muhammad Hazri (2011) Stress Analysis of Steam-Methane Reformer Tubes. [Final Year Project] (Unpublished)

llham, Muhammad Afif (2011) Design and Analysis of Run-of-River Water Turbine. [Final Year Project] (Unpublished)

M

M.K. GANESAN, ARUJENDRAN (2011) Design and Development of Body Panel for UTP's Shell Eco-Marathon Vehicle. [Final Year Project] (Unpublished)

MD RAZIB, NUR SYAFIQAH (2011) STUDY OF WEATHER RESISTANCE OF INORGANIC FILLERS BASED INTUMESCENT COATING. [Final Year Project] (Unpublished)

MD YUNUS, YUSHEILA (2011) DEVELOPMENT AND ANALYSIS OF HYBRID SOLAR DRYER WITH BIOMASS BACKUP HEATER. Masters thesis, UNIVERSITI TEKNOLOGI PETRONAS.

MOHAMAD ASRI, FARIS AKMAL (2011) DESIGN AND FABRICATION OF THREE DIMENSIONAL PERIODIC TABLE DISPLAY. [Final Year Project] (Unpublished)

MOHAMAD SAYUDI, MOHAMAD NURHALIM (2011) DESIGN OF THE DETACHABLE HUB FOR TURBINE BLADE COOLING SYSTEM. [Final Year Project] (Unpublished)

MOHAMAD YUSOFF, MUHAMMAD YUSRI (2011) CHARACTERIZATION OF SPRAYS FOR A PARTICLE COATING LIQUID. [Final Year Project] (Unpublished)

MOHAMMED, SALAH ELDIN MOHAMMED (2011) ANALYSIS OF ENGINE CHARACTERISTICS AND EMISSIONS FUELED BY IN-SITU MIXING OF SMALL AMOUNT OF HYDROGEN IN COMPRESSED NATURAL GAS. Masters thesis, UNIVERSITI TEKNOLOGI PETRONAS.

MOHD ALI, MUHAMMAD ABU BAKAR (2011) ROOT CAUSE FAILURE ANALYSIS OF A GAS TURBINE STARTER FAILURE. [Final Year Project] (Unpublished)

MOHD HAFIZ HIZAMI BIN IDRIS, MOHD HAFIZ (2011) Thermal Shrinkage and Gas Void Formation of Waxy Crude Oil –Gas Voids Study. [Final Year Project] (Unpublished)

MOHD ZUL AKMAL BIN ZAINAL ABIDIN, MOHD ZUL AKMAL (2011) Design of Modular Fixture for CNC Machining Center. [Final Year Project] (Unpublished)

MOHD ZULHELMIE BIN DERAMAN, MOHD ZULHELMIE (2011) AUTOMOTIVE ENGINE HEAT MANAGEMENT SYSTEM SHMS – SMART HEAT ENGINE MANAGEMENT. [Final Year Project] (Unpublished)

MOHD ZULHELMIE BIN DERAMAN, MOHD ZULHELMIE (2011) AUTOMOTIVE ENGINE IIEAT MANAGEMENT SYSTEM SHMS - SMART HEAT ENGINE MANAGEMENT. [Final Year Project] (Unpublished)

MOKHTAR, AINUL AKMAR (2011) FAILURE PROBABILITY MODELING FOR PIPING SYSTEMS SUBJECT TO CORROSION UNDER INSULATION. PhD. thesis, UTP.

MUHAMMAD HAZIQ, A.KADIR (2011) CHARACTERISATION OF INTER-LAMINAR SHEAR STRENGTH (ILSS) OF A RESIN INFUSED WIND TURBINE BLADE POLYMER COMPOSITE VIA THE SHORT BEAM SHEAR TEST. [Final Year Project] (Unpublished)

MUHAMMAD KAMAL, MUHAMMAD MARZUKI (2011) Rheological Characterization of Thixotropic Waxy Crude. [Final Year Project] (Unpublished)

MUHAMMAD SOLIHIN BIN MOHAMED AMIR, MUHAMMAD SOLIHIN (2011) MECHANICAL PROPERTIES OF PP/PET (POLYPROPYLENE AND POLY(ETHYLENE TEREPHTHALATE)) MICROFIBRILLAR COMPOSITE WITH AND WITHOUT COUPLING AGENT. [Final Year Project] (Unpublished)

MUHAMMAD SYAHMI HAMIZOL, MUHAMMAD SYAHMI (2011) STUDY OF BONDING STRENGTH OF INORGANIC FILLERS BASED INTUMESCENT COATING. [Final Year Project] (Unpublished)

Mahmud, Mohd Fairuz (2011) Processing and Characterisation of PE/PET Microfibrillar Composites. [Final Year Project] (Unpublished)

Marimuthu, Jeevaneswary (2011) Experimental Studies on the Effect of the Particle Shape and Distributor Blade Overlap Angle on the Bed Pressure Drop in a Swirling Fluidized Bed. [Final Year Project] (Unpublished)

Marwan Mohamed Fathi Sayed Khatab, Marwan Mohamed (2011) Effect of Fuel Additives on the Performance and Emissions of an Internal Combustion Engine. [Final Year Project] (Unpublished)

Mas'od, Muhammad Azlan (2011) Powder Metallurgy Processing of Aluminum Matrix Reinforced with Carbon Nanoubes. [Final Year Project] (Unpublished)

Mastuki, Nabilah (2011) A STUDY OF ACETIC ACID ROLE IN C02 CORROSION. [Final Year Project] (Unpublished)

Mazlan, Muharnad Muhaidi (2011) Wear investigation of elastically similar sliding bodies material. [Final Year Project] (Unpublished)

Md Safian, Nurul Aizad (2011) Powder Metallurgical Processing of Aluminium Metal Matrix Composites Reinforced with Graphite. [Final Year Project] (Unpublished)

Minhat, Mizuan (2011) Development of Spark Electrode for an Explosion Vessel. [Final Year Project] (Unpublished)

Mohamad Amin Zikri bin Mohamad Fauzi, Mohamad Amin Zikri (2011) New Blended Cement for Oil-Well Application. [Final Year Project] (Unpublished)

Mohamad Basri, Mohamad Abid (2011) Simulation of polymer melt during injection molding: Influence of undercooling rates. [Final Year Project] (Unpublished)

Mohamad Mohaimin bin Mokhlis, Mohamad Mohaimin (2011) Design and Fabrication of Drive Train System for Bosch Power Tools Cordless Race 2011. [Final Year Project] (Unpublished)

Mohamad Nashakir bin Md Dom, Mohamad Nashakir (2011) Reliability Block Diagram Assessment of Ethylene Oxide Production Facilities. [Final Year Project] (Unpublished)

Mohamad Refaee, Mohd Ashraf Arif (2011) Finite Element Analysis for a Knuckle Crane Boom. [Final Year Project] (Unpublished)

Mohamad Rozi Bin Sulaiman , Mohamad Rozi (2011) PERFORMANCE EVALUATION MODELING OF PRE-TREATMENT UNIT IN GAS PROCESSING PLANT. [Final Year Project] (Unpublished)

Mohamed Khatab, Marwan (2011) Effect of Fuel Additives on the Performance and Emissions of an Internal Combustion Engine. [Final Year Project] (Unpublished)

Mohamed Nawai, Rahimah (2011) Computational Fluid Dynamics (CFD) Study of Flow Development in an Eccentric Annulus. [Final Year Project] (Unpublished)

Mohammad Safaruddin, Muhammad Izwan (2011) Failure Analysis and Modification Analysis for the Seal Face in Mechanical Seal. [Final Year Project] (Unpublished)

Mohd Afandi, Nurfanizan (2011) Development of a System for Cooling Inlet Air for Gas Turbine using Fogging System. [Final Year Project] (Unpublished)

Mohd Amirul Mukminin bin Alias, Mohd amirul (2011) Study of Adhesive Strength in Polymer Plate Heat and Mass Exchanger. [Final Year Project] (Unpublished)

Mohd Anuar, Nurul Alia (2011) STRESS ANALYSIS OF UNDERWATER PIPELINE FOR IRREGULAR SEABED TOPOGRAPHY USING CAESAR II. [Final Year Project] (Unpublished)

Mohd Ashraf Arif b. Mohamad Refaee, Mohd Ashraf (2011) Finite Element Analysis for a Knuckle Crane Boom. [Final Year Project] (Unpublished)

Mohd Atiqullah bin Che Ghazali, Mohd Atiqullah (2011) Study on Drilling Fluid Using Electrical Capacitance Tomography (ECT). [Final Year Project] (Unpublished)

Mohd Fithri Azad Bin Abul Kalam Azad, Mohd Fithri Azad (2011) Piping Inspection Monitoring Strategy. [Final Year Project] (Unpublished)

Mohd Ghazi, Nurhafiza (2011) Effect of Nitriding Temperature on Duplex Stainless Steel. [Final Year Project] (Unpublished)

Mohd Hafizuddin Bin Hashim, Mohd Hafizuddin (2011) FINITE ELEMENT SIMULATION OF RESIDUAL STRESSES IN COLD-EXPANDED PLATE. [Final Year Project] (Unpublished)

Mohd Junaidi, Muhammad Hatta (2011) The Study of Tensile Failure on Thin Plate Hybrid Composites with Drilled Hole. [Final Year Project] (Unpublished)

Mohd Madzhir b Ibrahim, Mohd Madzhir (2011) Dynamic Characteristics of a Hybrid Composite Drive Shaft for Automotive Application. [Final Year Project] (Unpublished)

Mohd Nazari@Anuar, Nor Naqiah (2011) Microstructural Characterization of FSW and FSSW Aluminum Alloy Plates. [Final Year Project] (Unpublished)

Mohd Nizom, Muhammad Syamim (2011) Study of Aerodynamic Forces on Double Decker Bus for Driving Stability. [Final Year Project] (Unpublished)

Mohd Razali, Danial Syariman Razali (2011) Application of Crow-AMSAA to Predict Failure of Centrifugal Pumps with Increasing Failure Rates. [Final Year Project] (Unpublished)

Mohd Sabri, Fauzan Azmi (2011) DEVELOPMENT OF HONEYCOMB CORE FROM WASTE A4 PAPER AND INVESTIGATION ON ITS COMPRESSIVE PROPERTIES. [Final Year Project] (Unpublished)

Mohd Safwan Izzudin Bin Ramli, Mohd Safwan (2011) Line Modeling of CO2 Corrosion of Offshore Pipeline. [Final Year Project] (Unpublished)

Mohd Salleh, Mohd Syahir (2011) Upgrading and Optimisation of a Carburetted Engine to Fuel Injection for Best Fuel Consumption. [Final Year Project] (Unpublished)

Mohd Wafiuddin bin Abdul Rashid, Mohd Wafiuddin (2011) Finite Element Analysis of Residual Stresses in 316 Stainless Steel Pipelines SMAW Welding. [Final Year Project] (Unpublished)

Mohd Wafiuddin bin Abdul Rashid, Mohd Wafiuddin (2011) FINITE ELEMENT ANALYSIS OF RESIDUAL STRESSES IN 316 STAINLESS STEEL PIPELINES SMAW WELDING. [Final Year Project] (Unpublished)

Mohd Yasin, Mohd Nur Farhan (2011) Study ou Strength of Friction Stir Welded Plate in Corner Joint Configuration. [Final Year Project] (Unpublished)

Mohd Zafrullah, Abdul Rahman (2011) Tribological Properties Analysis on Nitrided AISI 3161 Stainless Steel. [Final Year Project] (Unpublished)

Mohd Zin, Nurul Aisyah (2011) Thermal Study of Gasifier Based Biomass Cookstove. [Final Year Project] (Unpublished)

Mohd Zulkifli, Mohd Syafiqrul Ikhwan (2011) STUDY OF THE MICRO UNMANNED AERIAL VEHICLE (MUAV) VERTICAL TAKE-OFF AND LANDING (VTOL) CONTROL SYSTEM. [Final Year Project] (Unpublished)

Mokhlis, Mohamad Mohaimin (2011) Design and Fabrication of Drive Train System for Bosch Power Tools Cordless Race 2011. [Final Year Project] (Unpublished)

Mokhlis, Mohamad Mohaimin (2011) Design and Fabrication of Drive Train System for Bosch Power Tools Cordless Race 2011. [Final Year Project] (Unpublished)

Mos, Mohamad Anuar (2011) A Study on Wear Resistance of Copper- Silica Sand Nanoparticles Based Composites. [Final Year Project] (Unpublished)

Mostafa Saleh Zakzouk, Mostafa Saleh (2011) Study of Multi Staging Operation of Swirling Fluidized Bed. [Final Year Project] (Unpublished)

Mostar, Suraya Hani (2011) A Study of Wind Turbine Blade Shape Design. [Final Year Project] (Unpublished)

Muhamad Muhaidi bin Mazlan, Muhamad Muhaidi (2011) Wear investigation of elastically similar sliding bodies material. [Final Year Project] (Unpublished)

Muhammad, Norkhairi (2011) Development of Experimental Setup to Evaluate Drilling Fluid's Characteristic Using Tomography Method. [Final Year Project] (Unpublished)

Muhammad , Muhammad Fadhil (2011) Study on Characteristics of Syngas Derived From Various Biomasses. [Final Year Project] (Unpublished)

Muhammad Afif bin Ilham, Muhammad Afif (2011) Design and Analysis of Run-of-River Water Turbine. [Final Year Project] (Unpublished)

Muhammad Afif bin Ilham, Muhammad Afif (2011) Design and Analysis of Run-of-River Water Turbine. [Final Year Project] (Unpublished)

Muhammad Afiq, Mansor (2011) Characterization of surface treated layers on Austenitic Stainless Steel and 9.3%Cr Ferritic steel resulting from High Temperature Nitriding. [Final Year Project] (Unpublished)

Muhammad Afiq bin Mansor, Muhammad Afiq (2011) Characterization of surface treated layers on Austenitic Stainless Steel and 9.3%Cr Ferritic steel resulting from High Temperature Nitriding. [Final Year Project] (Unpublished)

Muhammad Fadhli bin Muhammad, Muhammad Fadhli (2011) Reliability Analysis of Heat Recovery Steam Generator Based on Creep. [Final Year Project] (Unpublished)

Muhammad Faris Bin Mohd Pakri, Muhammad Faris (2011) STRESS ANALYSIS OF SUBSEA WELLHEAD HOUSING. [Final Year Project] (Unpublished)

Muhammad Hafiz Bin Abu Talib, Muhammad Hafiz (2011) Study on the Characterization of Silica Sand Nanoparticles-Iron Based Composites (Fe-SiO2) Using Nitrogen Atmosphere as Sintering Environment. [Final Year Project] (Unpublished)

Muhammad Hisyam Bin Noor Asmi, Muhammad Hisyam (2011) DRAG REDUCTION STUDY ON XANTHAN WATER SOLUTION AND XANTHAN OIL SOLUTION. [Final Year Project] (Unpublished)

Muhammad Husni bin Muhammad Sani, Muhammad Husni (2011) Combustion of a Controlled Condition Synthetic Gas with Diesel in a Single Cylinder Compression Ignition Engine. [Final Year Project] (Unpublished)

Muhammad Nazree Bin Alehan, Muhammad Nazree (2011) Study on Improvement of Cooling Energy and Thermal Comfort of Klinik Pergigian Batu Gajah. [Final Year Project] (Unpublished)

Muhammad Sani, Muhammad Husni (2011) Combustion of a Controlled Condition Synthetic Gas with Diesel in a Single Cylinder Compression Ignition Engine. [Final Year Project] (Unpublished)

Muhammad Syamil B Zakaria, Muhammad (2011) Stress Analysis and Design of the Frame of a Personal Electric Vehicle. [Final Year Project] (Unpublished)

Muhammad Syamim bin Mohd Nizom, Muhammad Syamim (2011) Study of Aerodynamics of Double Decker Bus for Driving Stability. [Final Year Project] (Unpublished)

Muhammad kamil, Muhammad kamil (2011) SPRAY CHARACTERISTICS OF NONNEWTONIAN FLUIDS. [Final Year Project] (Unpublished)

Mustaffa, Shahira Ernie Lyana (2011) TRANSMISSION SYSTEM IN SMALL WIND TURBINE. [Final Year Project] (Unpublished)

N

NABILAH BT MASTUKI , NABILAH (2011) A STUDY OF ACETIC ACID ROLE IN CO2 CORROSION. [Final Year Project] (Unpublished)

NUR SYAFIQAH BINTI MD RAZIB, NUR SYAFIQAH (2011) STUDY OF WEATHER RESISTANCE OF INORGANIC FILLERS BASED INTUMESCENT COATING. [Final Year Project] (Unpublished)

Nabila Farhana binti Abdul Khalil, Nabila Farhana (2011) Mechanical Properties of Low-Density Polyethylene/Recycled Poly(ethylene Terephthalate) (LDPE/r-PET) Microfibrillar Composite. [Final Year Project] (Unpublished)

Nadiatul Haswin bte. Hassan Merican, Nadiatul Haswin (2011) CHARACTERIZATION OF 316L STAINLESS STEEL POWDER INJECTION MOLDING. [Final Year Project] (Unpublished)

Nawal Binti Shamsuddin, Nawal (2011) Study of Carbon Dioxide Corrosion on Carbon Steel at Different Salt Concentrations. [Final Year Project] (Unpublished)

Nik Leh, Nik Siti Hasniati (2011) A Study on Energy Efficiency ofUTP Academic Buildings. [Final Year Project] (Unpublished)

Nik Mohamed Daud, Nik Mohd Radi (2011) Design of a Mini Thermal Storage System for Air- Conditioning Service. [Final Year Project] (Unpublished)

Nik Mohd Radi Bin Nik Mohamed Daud, Nik Mohd Radi (2011) Design of a Mini Thermal Storage System for Air-Conditioning Service. [Final Year Project] (Unpublished)

Nordin, Abd Halim (2011) Design of A Heat Exchanger for Gas Turbine Inlet Air Cooling System. [Final Year Project] (Unpublished)

Norsham, Nurufirin (2011) A Study of Indoor Air Quality In UTP's Academic Buildings No.18 Level 3. [Final Year Project] (Unpublished)

Nursyazwani binti Ramli, Nursyazwani (2011) Process Reliability Analysis of Gas District Cooling by Using Production Chilled Water Data. [Final Year Project] (Unpublished)

Nurul Aisyah Binti Mohd Zin, Nurul (2011) Thermal Study of Gasifier Based Biomass Cookstove. [Final Year Project] (Unpublished)

Nurul Alia binti Mohd Anuar, Nurul Alia (2011) Stress Analysis of Underwater Pipeline for Irregular Seabed Topography Using CAESAR II. [Final Year Project] (Unpublished)

Nurul Atiqah Binti Roszopor, Nurul Atiqah (2011) Assessment for Process Capability Using Weibull Analysis. [Final Year Project] (Unpublished)

Nurul Najat binti Ahmad, Nurul Najat (2011) Study of the Microstructure of the Gas Turbine Internal Blade. [Final Year Project] (Unpublished)

O

OO, AUNG MYINT (2011) Knowledge Based Management For Rotating Equipment Diagnostics. [Final Year Project] (Unpublished)

Omar, Nor Sharifah (2011) The Effects of Fiberglass on the Thermal Insulation Properties of Intumescent Coatings. [Final Year Project] (Unpublished)

Ong Mar Vin, Ong Mar (2011) THERMAL SHRINKAGE AND GAS VOID FORMATION OF WAXY CRUDE OIL -FLOW LOOP DEVELOPMENT. [Final Year Project] (Unpublished)

P

PANCHATCHARAM, NAVEENCHANDRAN (2011) HOMOGENEOUS CHARGE COMPRESSION IGNITION COMBUSTION CONTROL BY CNG DIRECT INJECTION. PhD. thesis, UTP.

PUTRA RIFEMI, YASSER (2011) DESIGN AND DEVELOPMENT OF A RUNNING CHASSIS FOR A SIMPLE VEHICLE (BRAKE, SUSPENSION, STEERING SYSTEM). [Final Year Project] (Unpublished)

Paarthiban a/l Gunnasegaran, Paarthiban (2011) Loss Circulation Material in Drilling Fluid. [Final Year Project] (Unpublished)

R

RAZALI, LUQMAN HAKIM (2011) NEW CELLULOSIC BASED ACOUSTIC WALL BOARD MATERIAL FROM PAPER WASTE. [Final Year Project] (Unpublished)

RAZALI, MOHD SAIFUL IZW AN (2011) DEVELOPMENT OF A SYSTEM FOR COOLING INLET AIR FOR GAS TURBINE USING CHILLED WATER. [Final Year Project] (Unpublished)

ROSLAN, MUHAMMAD SHAFIQ (2011) AERODYNAMICS OPTIMIZATION OF THE UNIVERSITI TEKNOLOGI PETRONAS PERODUA ECO CHALLENGE 2011 CAR. [Final Year Project] (Unpublished)

ROSLAN, MUHAMMAD SHAFIQ (2011) Aerodynamics Optimization of the Univeniti Teknologi PETRONAS 'PERODUA Eco-ChaUenge 2011' Car. [Final Year Project] (Unpublished)

ROSLIM, MUHAMMAD KHAIRI (2011) DESIGNING, PROTOTYPING AND TESTING OF A NOVEL SAXOPHONE PRACTICE MUTE. [Final Year Project] (Unpublished)

Razali, Luqman Hakim (2011) NEW CELLULOSIC-BASED ACOUSTIC WALL BOARD MATERIAL FROM PAPER WASTE. [Final Year Project] (Unpublished)

Roszopor, Nurul Atiqah (2011) Assessment of Process Capability Using Weibull Analysis. [Final Year Project] (Unpublished)

Ruslan, Rifdi Zulfadhli (2011) Characterisation of Voids in a Polymer Composite Wind Turbine Blade Manufactured via Resin Infusion Process. [Final Year Project] (Unpublished)

S

SHAHIR, ADIB ZULFADHLI (2011) Cold and hot water plumbing system on living quarters in an offshore platform. [Final Year Project] (Unpublished)

SHAMSUDDIN, NAWAL (2011) Study of Carbon Dioxide Corrosion on Carbon Steel at Different Salt Concentrations. [Final Year Project] (Unpublished)

SINGH, HARNAMDAV (2011) STUDY ON CHAR EXPASION AND HEAT SIDELDING OF INTUMESCENT COATING BASED ON INORGANIC FILLERS. [Final Year Project] (Unpublished)

SINNADURAI, SUREN LIM (2011) A COMPUTATIONAL APPROACH FOR THE MODELING OF SHORT-FIBER ORIENTATION IN A VISCOUS FLOW DURING THE MOLD-FILLING PROCESS USING DIFFERENT CLOSURE APPROXIMATIONS. Masters thesis, UNIVERSITI TEKNOLOGI PETRONAS.

SITTI KHADIJAH BT SHAHUL HAMID, SITTI KHADIJAH (2011) DEVELOPMENT AND MICROSTRUCTURAL ANALYSIS OF CARBON NANOTUBES REINFORCED COPPER MATRIX NANOCOMPOSITES USING PIM TECHNIQUE. [Final Year Project] (Unpublished)

SULONG, AHMAD TARMIZI (2011) PERFORMANCE EVALUATION OF EVACUATED SOLAR WATER HEATER UNDER TROPICAL CONDITION. [Final Year Project] (Unpublished)

Said, Nurfatin (2011) Three-Dimensional Reconstruction of Friction Stir Welding Microstructure via Serial Sectioning. [Final Year Project] (Unpublished)

Seong, Javier Teo Han (2011) Dynamic Anaiysis of Suspension Bridge. [Final Year Project] (Unpublished)

Shaharuddin, Syazatul Aqilah (2011) AN INVESTIGATION INTO THE CORROSION BEHAVIOUR OF ZINC AND CHROMIUM METALLIC COATING ON MILD STEEL SUBSTRATE. [Final Year Project] (Unpublished)

Shahrom, Mohammad Firdaus (2011) Study on the Wear Resistance of Duplex Stainless Steel after Undergo Nitrogen Diffusion Process Varies With Time. [Final Year Project] (Unpublished)

Shalini, Subramaniam (2011) Corrosion Study ofNitrided X-52 Carbon Steel in C02 Environment. [Final Year Project] (Unpublished)

Shamshuddin, Ahmad Shahizan (2011) Effect of Surface Roughness on Adhesion and Corrosion Properties for Metal Surface. [Final Year Project] (Unpublished)

Shamsuddin, Siti Nabihah (2011) Microstructural Study of Friction Stir Welded Dissimilar Materials: 6061 Aluminum Alloy to Pure Copper. [Final Year Project] (Unpublished)

Shamsuddin, Siti Nabihah (2011) Microstructural Study of Friction Stir Welded Dissimilar Materials: 6061 Aluminum Alloy to Pure Copper. [Final Year Project] (Unpublished)

Shamsudin, Nurfarahin (2011) Study on Microstructure and Strength of Friction Stir Spot Welding On Copper Alloy Sheet. [Final Year Project] (Unpublished)

Sharuddin, Intan Naquiah (2011) Preliminary Design of Unmanned Aerial Vehicle (UA V) for Petroleum Pipe Monitoring System. [Final Year Project] (Unpublished)

Sholihotdin, Syahirhatim (2011) FINITE ELEMENT ANALYSIS OF RESIDUAL STRESSES IN WELDED STRUCTURES. [Final Year Project] (Unpublished)

Siti Nur Farhin Mokhtar, Siti Nur (2011) FRACTURE TOUGHNESS AND FATIGUE CRACK GROWTH TESTS OF FRICTION STIR WELDED PLATES. [Final Year Project] (Unpublished)

Soon, Kee Lian (2011) Experimental Study of Oil Palm Biomass Waste Mixture for Energy Potential. [Final Year Project] (Unpublished)

Sulaiman, Fahim Anati (2011) Seabed Logging Modeling Using Comsol Multiphysic Software: Effect of Hydrocarbon Geometry to the EM Wave. [Final Year Project] (Unpublished)

Sulaiman, Mohamad Rozi (2011) PERFORMANCE EVALUATION MODELING OF PRE-TREATMENT UNIT IN GAS PROCESSING PLANT. [Final Year Project] (Unpublished)

Sulaiman, Nor Hidayatul Solehah (2011) Thermodynamic Analysis and Comparison of CO2/Propane and C02/Isobutane Cascade Refrigeration System. [Final Year Project] (Unpublished)

Sulaiman, Shafiq (2011) Waste Management In Petroleum Refinery Spent Catalyst. [Final Year Project] (Unpublished)

Syaida Hazira Binti Ramli, Syaida (2011) CFD SIMULATIONS OF ANNULAR DISTRIBUTOR OF SWIRLING FLUIDIZED BED (SFB) REACTOR. [Final Year Project] (Unpublished)

Syed Sheikh, Syed Sadiq (2011) A STUDY OF ACETIC ACID ROLE IN C02 CORROSION. [Final Year Project] (Unpublished)

T

TAN, FOK HON (2011) SIMULATION OF ENERGY PROMOTERS IN THE INTERMEDIATE PASSAGE OF GAS TURBINE. [Final Year Project] (Unpublished)

TENGKU MUHAMMAD, TENGKU IBRAHIM (2011) Reliability Block Diagram Method for RAM Study of Dehydration Unit. [Final Year Project] (Unpublished)

TRI BHASKORO, PETRUS (2011) EFFECT OF ADAPTIVE COOLING TECHNIQUE ON ENERGY USAGE PATTERNS OF A CENTRALIZED HVAC SYSTEM. Masters thesis, UNIVERSITI TEKNOLOGI PETRONAS.

Taha Ellakany, Farid Fawzy Fathy (2011) Preliminary Drying of Oil Palm Fronds Using Concentrated Solar Thermal Power. [Final Year Project] (Unpublished)

Tajul Syazwan Bin Tajor Amar, Tajul Syazwan (2011) Scheduling of Electricity Distribution at UTP GDC Plant Using Linear Programming. [Final Year Project] (Unpublished)

Tengku Ibrahim bin Tengku Muhammad, Tengku Ibrahim (2011) Reliability Block Diagram Method for RAM Study of Dehydration Unit. [Final Year Project] (Unpublished)

Tengku Norhanisah Bt Tengku Kamaruddin, Tengku Norhanisah (2011) Experimental Study on Gas Turbine Engine Dynamics. [Final Year Project] (Unpublished)

Toh, Seng Peow (2011) Analytical and Experimental Investigation of Convective Heat Transfer in Solar Collector. [Final Year Project] (Unpublished)

U

Ummu Hani Ilias, Ummu (2011) Effect of Different Welding Tool Pin Shapes on Friction Stir Welding Plates Microstructure. [Final Year Project] (Unpublished)

V

V.Jagendran Naidu A/L Veerannan, V.Jagendran Naidu (2011) An investigation on the energy recovery potential of sewage sludge in Malaysia through biogas generation. [Final Year Project] (Unpublished)

VEERANNAN, V.JAGENDRAN NAIDU (2011) An investigation on the energy recovery potential of sewage sludge in Malaysia through biogas generation. [Final Year Project] (Unpublished)

W

WALUYO, JOKO WALUYO (2011) SIMULATION MODELS FOR SINGLE AND TWO-STAGE CHARGING OF STRATIFIED THERMAL ENERGY STORAGE. PhD. thesis, UNIVERSITI TEKNOLOGI PETRONAS.

WISMO WINARTO, FELIXTIANUS EKO (2011) INVESTIGATION OF MICRO BUBBLE FOR THE REMOVAL OF SUSPENDED PARTICLE AND ENHANCEMENT OF DISSOLVED OXYGEN IN POLLUTED WATER. PhD. thesis, UNIVERSITI TEKNOLOGI PETRONAS.

WOON, CHEE LUNG (2011) STUDY OF POME AND MIXTURE OF POME AND PALM OIL FIBRE CHARACTERISTICS AND POTENTIAL FOR BIOMASS ENERGY. [Final Year Project] (Unpublished)

Wan Ahmad Fahmi Azrin Che Mohd, Wan Ahmad Fahmi Azrin (2011) GEOPOLYMER CEMENT FOR OIL WELL WITH IMPROVED PROPERTIES. [Final Year Project] (Unpublished)

Wan Khairul Anuar, Wan Ahmad Ridhwan (2011) Design and Analysis of a Multi-Purpose Small Personal Transport System with In-Wheel Drive System. [Final Year Project] (Unpublished)

Y

YASIN, FARAH QURSIAH (2011) Study of Suspended Droplets by Laser Attenuation Method. [Final Year Project] (Unpublished)

Yasaa, Dzul Khairee (2011) Study on Effects of Nanosilica Sand Addition on Physical and Mechanical Properties of Polypropylene (PP). [Final Year Project] (Unpublished)

Z

ZAHARI, MOHD ZULFADZLI (2011) THE EFFECT OF NITRIDING A MARTENSITIC STAINLESS STEEL WITH RESPECT TO TEMPERATURE VARIATION. [Final Year Project] (Unpublished)

Zahari, Mohamad Armiya (2011) Estimation of Burst Pressure of Corroded Pipeline Using Finite Element Analysis (FEA). [Final Year Project] (Unpublished)

Zainal Abidin, Mohd Zul Akmal (2011) Design of Modular Fixture for CNC Machining Center. [Final Year Project] (Unpublished)

Zainal Alam, Zainol Arifin (2011) A Study of Tensile Behavior on Drilling Induced Damage of Hybrid Composite. [Final Year Project] (Unpublished)

Zaino!, Nur Syuhada (2011) Effeds of Coupling Agent on Mechanical Properties of Rice Husk Filled Polyethylene Composite. [Final Year Project] (Unpublished)

Zainuddin, Abu Yazid (2011) Study ou wear resistance and microstructure of nanosilica-iron based composites. [Final Year Project] (Unpublished)

Zainuddin, Afiq Azreen (2011) Study of Combustion Characteristic of LPG with Steam in a Burner. [Final Year Project] (Unpublished)

Zainuddin, Mohd Zulhilmi (2011) Design and Fabrication of Simple Vehicle Body Panel. [Final Year Project] (Unpublished)

Zainuddin, Zainor Faisal (2011) THE DESIGN OF THE DRIVE SYSTEM FOR A PERSONAL TRANSPORTER. [Final Year Project] (Unpublished)

Zakaria, Nur Aisah (2011) A Systematic Study of Film Formation in C02 Corrosion. [Final Year Project] (Unpublished)

Zulfikri Gopinath, Muhammad Khairul Nizam (2011) Study On The Effect Of Nitriding Temperature Towards Wear Resistance Of Duplex Stainless Steel. [Final Year Project] (Unpublished)

Zulkifli, Zurhazrin Azureen (2011) Reliability Analysis of Pressure Relief Valve. [Final Year Project] (Unpublished)

Zurhazrin Azureen Binti Zulkifli, Zurhazrin (2011) Reliability Analysis of Pressure Relief Valve. [Final Year Project] (Unpublished)

This list was generated on Thu Feb 9 06:58:53 2023 +08.