Browse by Type

Lee, Lee Kien Yang (2013) A STUDY OF REGENERATIVE BRAKING SYSTEM (RBS) INVOLVING MODIFIED BRAKE PEDAL FOR RETROFIT CONVERSION OF HYBRID ELECTRIC VEHICLE (HEV). [Final Year Project] (Unpublished)

MOHAMED ELEMAM HASHISH, BASEL IBRAHIM (2013) Dynamic Modelling and simulation of High Integrity Pressure Protection System. [Final Year Project] (Unpublished)

ABANG MOHD KHALID, ABANG NIZAMUDDIN (2013) DEVELOPMENT OF ELECTRICAL CAPACITANCE TOMOGRAPHY DATA ACQUISITION SYSTEM. [Final Year Project] (Unpublished)

ROSLI, NURFATIHAH SYALWIAH (2013) IMPLEMENTATION OF ADVANCED PROCESS CONTROL FOR FLOW CONTROL APPLICATION. [Final Year Project] (Unpublished)

CHIN, CHIN HAN SHEN (2013) DESIGN AND IMPROVEMENT OF ALGORITHMS FOR AUTONOMOUS MOBILE ROBOT. [Final Year Project] (Unpublished)

LIEW, ALEX LIEW VUN PING (2013) THE IMPROVEMENT OF SAFETY AND PROTECTION FOR ELECTRONIC LIGHTING BALLAST IN SALTWATER ENVIRONMENT. [Final Year Project] (Unpublished)

YEO, YEO SOCK CHUANG (2013) AUTOMATED MALARIA PARASITE QUANTIFICATION OF THIN BLOOD SMEAR. [Final Year Project] (Unpublished)

MIN, AUNG PHYO (2013) Drill stem and Deliverability test analysis: Case study of a gas field well test analysis in Myanmar. [Final Year Project] (Unpublished)

Lim , Vicheaka (2013) High Rise Building: Vibration Control using Tuned Mass Damper. [Final Year Project]

SOTHEA, CHIM (2013) Building Information Modeling for Integrated Low Carbon Infrastructure model through the analysis of energy efficiency and daylighting. [Final Year Project]

MUSA, MUHAMMAD SABRI (2013) IMPACT OF SITE ISSUES FOR THE CONSTRUCTION PROJECTS. [Final Year Project]

WAN SU, WAN MUHAMMAD ISKANDAR SHARIFFADIN (2013) Reliability Assessment of Corroded Pipelines using Bayesian Updating Technique. [Final Year Project]

DIAH , NOVITASARI (2013) THE CAUSES AND EFFECTS OF DELAY IN A CONSTRUCTION OF INTERNATIONAL AIRPORT. [Final Year Project]

ALROWAISHAN, KHALED MOHAMED NAJI (2013) DEVELOPMENT OF WLP IN GEOPOLYMER. [Final Year Project]

Zaini, Muhammad Zulhusni (2013) The Performance of Glass Fiber Reinforced Polymer (GFRP) Under Abrasive Condition. [Final Year Project]

Ahmad Termizi, Syarafina (2013) Development of Platform Selection Tool for Offshore Decommissioning in Malaysia. [Final Year Project]

Phan Nguyen , Quy Nhon (2013) Interval Type 2 Fuzzy Logic Tuning for PID Controller of DC Servo Motors. [Final Year Project]

HADRYAN GABRIEL DW MAJIN, HADRYAN GABRIEL DW MAJIN (2013) Visiual Detection for Robot Movement. [Final Year Project] (Unpublished)

NASSER AL-SHARIF, SHARIF AHMED (2013) EFFECTIVE MICROORGANISMS (EM) DISPERSION SYSTEM FOR DILUTING POLLUTANT IN RIVER. [Final Year Project] (Unpublished)

MOHAMED MYDIN, ABDUL RASID (2013) RESIST PROTECTION OXIDE TRANSISTOR AS SPIKING NEURON. [Final Year Project] (Unpublished)

HUSSIEN, MOHAMED MEERA (2013) INTERFACING CMOS CAMERA WITH ARM MICROCONTROLLER FOR SMALL ROBOTIC PLATFORM. [Final Year Project] (Unpublished)

A.AZIZ, NURUL SYAMIMI (2013) HEP-2 CELL IMAGES FEATURE EXTRACTION BASED ON TEXTURAL AND STATISTICAL ANALYSIS. [Final Year Project] (Unpublished)

Doan, Thanh Long (2013) ADAPTIVE FILTERING TECHNIQUES FOR AUDIO SOUND RECOVERY. [Final Year Project] (Unpublished)

GERARD, DJENGOMEMGOTO (2013) DEVELOPMENT OF GRAPHICAL USER INTERFACE FOR MICROWAVE FILTER DESIGN. [Final Year Project] (Unpublished)

Mashadov, Guwanch (2013) Implementation of Arithmetic Mean Method on Determination of Peak Junction Temperature of Semiconductor Device on Printed Circuit Board. [Final Year Project] (Unpublished)

BAHARU, BADIUZAMAN (2013) DRIVER DROWSINESS DETECTION BY USING WEBCAM. [Final Year Project] (Unpublished)

Johnson, Girberth (2013) Vehicle Tracking using Video Cameras. [Final Year Project] (Unpublished)

Mehfar, Noor Liyana (2013) SEGMENTATION OF ANTI-NUCLEAR ANTIBODY IMAGES BASED ON WATERSHEDS AND FAST REGION MERGING. [Final Year Project] (Unpublished)

BORETSKAYA, VIKTORIYA (2013) VITILIGO LESION ASSESSMENT TOOL ON SMARTPHONE. [Final Year Project] (Unpublished)

Yu , Yang Long (2013) DEVELOPMENT & IMPLEMENTATION of an QoS-AWARE ROUTING in WIRELESS SENSOR MESH AND MULTI-HOP NETWORKS. [Final Year Project] (Unpublished)

MOHD YUSOFF, NORZAIMAH (2013) “DESIGN AND SIMULATION OF HIGH CURRENT POWER SUPPLY FOR OFFSHORE INSTRUMENTATION”. [Final Year Project] (Unpublished)

Chung, Tran Duc (2013) Design and simulation of collision warning system for road safety improvement. [Final Year Project] (Unpublished)

Pla Set , Saeksarn Sinnaso (2013) A PERSONAL MOBILE FITNESS TRAINER. [Final Year Project]

Adi, Luthfan Areka (2013) Automatic Evaluation for Engineering Drawing. [Final Year Project]

Mohamad Zaki, Mohamad Rusydi (2013) Edutainment App on Malaysia. [Final Year Project]

Muhamad Zain , Muhamad Firdaus (2013) Enhanced Hostel Registration Application. [Final Year Project]

Ahmad Zaki, Hani Yasmin (2013) STUTTERER AID MOBILE APPLICATION. [Final Year Project]

Azman, Athira (2013) The Effect Of Voltage To Welded Aluminum And Steel By Using Gas Metal Arc Welding (GMAW). [Final Year Project] (Unpublished)

Mohd Mohtar, Nurulhusna (2013) Vibration Analysis of Centrifugal Pump. [Final Year Project] (Unpublished)

Zainuddin, Mohamed Zakiran (2013) Optimal Design of Wheelchair Drive Mechanism. [Final Year Project] (Unpublished)

Ab Manaf, Nuratiqah (2013) Remaining Fatigue Life Assessment by Using Crack Growth Model. [Final Year Project] (Unpublished)

Zainudin, Muhammad Hazwan (2013) STUDY OF THERMALLY DRIVEN SORPTION CHILLER. [Final Year Project] (Unpublished)

Wahi, Nur E’zzati (2013) Study on Combustions Characteristics of Diesel-Vegetable Oil Blended using Industrial Fuel Burner. [Final Year Project] (Unpublished)

Karriyev, Charymurad (2013) Fractionation of Crude Oil using Solubility Parameter of Supercritical Carbon Dioxide. [Final Year Project] (Unpublished)

Mohd Nasir, Mohd Nizar (2013) POLYCARBONATE WITH FUNCTIONALIZED GRAPHITE NANOFIBERS (GNF) AND THE STUDY OF ITS THERMAL AND MECHANICAL PROPERTIES. [Final Year Project] (Unpublished)

Abdul Lahin, Farhiza (2013) Learning Dusun Language Application: Daily Conversation. [Final Year Project]

A. William, Moshey (2013) BULLHEADING II TWO PHASE SIMULATION OF A DEFINITIVE WELL KILL. [Final Year Project] (Unpublished)

Ulugbek , Sultanov (2013) Development of Ductile Concrete without Coarse Aggregates by Using Steel and Basalt Fibers. [Final Year Project] (Unpublished)

Nasir, Ismail (2013) Development of Incident Investigation System for Process Safety Management in Process Industries. [Final Year Project] (Unpublished)

YAHYA, AHMAD FAHMY (2013) TOXICITY STUDY OF CO2 RELEASE IN BIOGAS PROCESS USING COMPUTATIONAL FLUID DYNAMICS MODELING. [Final Year Project] (Unpublished)

Lee, Yi Tong (2013) HIERARCHICAL SYNTHESIS AND CHARACTERIZATION OF CERIUM OXIDE NANOMATERIAL FOR PHOTODEGRADATION OF METHYLENE BLUE. [Final Year Project] (Unpublished)

SAPBAEV, ANNAMYRAT (2013) MODELING AND PRESSURE CONTROL SYSTEM FOR AIR PLANT. [Final Year Project] (Unpublished)

SHAMSUDIN, MOHD ZULHELMI (2013) DESIGN AND IMPLEMENTATION OF TEMPERATURE MONITORING USING ZIGBEE WIRELESS TECHNOLOGY. [Final Year Project] (Unpublished)

MUKHTAR TAHIR, SABRIN OMER (2013) UMTS RADIO NETWORK PLANNING FOR BATU GAJAH AREA. [Final Year Project] (Unpublished)

VELAUTHAM, VILLASINI (2013) DESIGN AND MODELLING OF A LINEAR GENERATOR FOR WAVE ENERGY CONVERSIONS. [Final Year Project] (Unpublished)

CHONG, ANDY CHONG KONG KWONG (2013) Modeling and Optimization of Feeder Bus Routes for Electric Train Service. [Final Year Project] (Unpublished)

Wong, Han Sze (2013) The Potential Of Lawin Tuff For Generating A Portland Fly Ash Cement To Be Used In Oil Well Cementing. [Final Year Project] (Unpublished)

Peng Sheng, Lim (2013) Modelling of Axial Spring Stiffness in Active Vibration Controlled Drilling. [Final Year Project] (Unpublished)

Sern, Chew Jay (2013) Wellbore Plastering during CasingwhileDrilling Prediction. [Final Year Project] (Unpublished)

Jun Li, Khor (2013) Residence Time Distribution and Hydrodynamics Studies of a Swirling Fluidized Bed. [Final Year Project] (Unpublished)

WONG , CHEE KING (2013) Studies on a Two-layer Swirling Fluidized Bed (SFB). [Final Year Project] (Unpublished)

Sern, Tan Yinn (2013) Experimental Studies on the Wavy Regime in Swirling Fluidized Bed. [Final Year Project] (Unpublished)

Salehuddin, Muhammad Hazeeq (2013) Effect of Varying Air Flow and Types of Paper on Heat Exchanger of Energy Recovery System. [Final Year Project] (Unpublished)

ABDUL RANI, MOHD AMIRUL FIKRI (2013) STUDY OF POSSIBLE FIRE DOOR MATERIALS MADE FROM ALTERNATIVE WASTE ITEMS. [Final Year Project] (Unpublished)

Ismail, Muhammad Iskandar (2013) The Effects of Surfactant on Combustion Characteristics of Emulsified Diesel Fuel. [Final Year Project] (Unpublished)

MOSTAFA MOHAMED HEIKAL, RAGHDA MOHAMED (2013) Flow Distribution Inside An Air Conditioning Distributor Using FLUENT Simulation. [Final Year Project] (Unpublished)

CHONG, YEW POR (2013) INVESTIGATION ON THE EFFECT OF THE CHIMNEY CUP ON THE NATURAL UPWARD DRAFTING. [Final Year Project] (Unpublished)

ANANDARAJAH, YASHADINI (2013) UTILIZATION OF DIRECT SOLAR RADIATION FOR INDOOR LIGHTING. [Final Year Project] (Unpublished)

Mustafa, Afildhatul Nashima (2013) STUDY ON THE EFFECT OF VOIDS ON RESTART PUMPING OF GELLED CRUDE OIL IN PRODUCTION PIPELINE. [Final Year Project] (Unpublished)

AB. RAHMAN, HARUN (2013) MODELLING VISCOSITY BELOW BUBBLE POINT PRESSURE USING GROUP METHOD OF DATA HANDLING (GMDH): A COMPARATIVE STUDY. [Final Year Project] (Unpublished)

Ze Shen, Chin (2013) Effects of Salt on Interfacial Tension of Surfactant-Brine-Oil System. [Final Year Project] (Unpublished)

Huongket, Hwang (2013) Phase Behaviour Measurement for High CO2 Content Natural Gas Hydrates. [Final Year Project] (Unpublished)

TAN, FENG JIE (2013) NIGHT-TIME ANIMAL RECOGNITION SYSTEM USING DIGITAL IMAGE PROCESSING. [Final Year Project] (Unpublished)

Ansari, Ahmed Fawad (2013) Design and Development of Hybrid Maximum Power Point Tracking Algorithm for Photovoltaic Cell. [Final Year Project] (Unpublished)

TAN, HENNA SHEN PO (2013) RFID In-Flight Security Seal. [Final Year Project] (Unpublished)

Abu, Fadhilatul Hikmah (2013) Design and Analysis of Recovery Net Landing for UAV ALUDRA MR-01. [Final Year Project] (Unpublished)

Aloysius, Ceassar ak. William (2013) ANALYSIS OF ANTI-WASHOUT ADMIXTURE FOR UNDERWATER CONCRETE. [Final Year Project] (Unpublished)

Marzuki, Noor Hazimah (2013) THE USE OF SULFUR IN FLEXIBLE PAVEMENT ROAD CONSTRUCTION OPPORTUNITIES AND CONCERNS. [Final Year Project]

Mahadi, Nor Nadia Aida (2013) WAVE INTERACTIONS OF H-TYPE FLOATING BREAKWATER. [Final Year Project]

Mohd Hamdan, Azimah (2013) Bond-slip Relationship of Carbon Fiber Reinforced Polymer (CFRP) Plated Steel Member under Fatigue Loading. [Final Year Project]

Abu Bakar, Fadiyatul Nabilah (2013) Biological Treatment of Refinery Wastewater Using Sequencing Batch Reactor (SBR) System. [Final Year Project]

Shahrul Anwar, Hafizul Fiqry (2013) The Effect of Left Turn no Red on Road Users at Signalized Intersection. [Final Year Project]

Che Azuhan, Mohd Uzair (2013) Using Spatial Images to Detect Changes in Shorelines. [Final Year Project]

MOHAMMED AHMED, FAISAL (2013) EFFECTS OF GRINDING CYCLES AND TEMPERATURE ON THE PHYSICAL AND ENGINEERING PROPERTIES OF MIRHA IN CONCRETE. [Final Year Project]

Mohd Ahmadan, Nor Asyidah (2013) Solar Distillation using Energy Augmentation from the Roof. [Final Year Project]

SEBI @ HASBI, NURHAFIZA (2013) CASE STUDY ON SAFETY MANAGEMENT IN CONSTRUCTION PROJECT. [Final Year Project]

M.RIZAL, NUR HERNAH SYAHILA (2013) The Effect of Porosity and Saturation on Electrical Resistivity and Strength of Soil for Clay Size Particle. [Final Year Project]

FABIANO AYIRA, OKOT JOHN (2013) Investigating the Properties of Reactive Powder Concrete (RPC) – Compressive and Flexural Strength. [Final Year Project]

RASHID, ROSEDIANTY MARSILLA (2013) Degradation of Polycyclic Aromatic Hydrocarbons (PAHs) in Produced Water. [Final Year Project]

NY, VANNETH (2013) COMPARISON OF PRODUCTION OF NUTRIENT IN THE ORGANIC DEGRADATION OF REFINERY THROUGH AEROBIC AND ANAEROBIC DIGESTION. [Final Year Project]

Tingui Bandu, Zacharia Thomas (2013) DISTRIBUTION OF UNBONDED PRESTRESS IN STRUCTURAL SYSTEM FOR BRICK WALL. [Final Year Project]

Abdul Kadir, Munira Malim (2013) Numerical Modelling for Prediction of Suspended Sediment Concentration in Bidor River. [Final Year Project]

ABDUL JALIL, NADIA (2013) COMPARATIVE STUDY OF MICROWAVE ASSISTED PRE-TREATMENT METHODS OF RICE HUSK FOR POTENTIAL ENERGY RECOVERY THROUGH ANAEROBIC DIGESTION. [Final Year Project]

NUR, SARAH JOY (2013) ANALYSIS OF REINFORCED CONCRETE DAPPED-END BEAMS USING VECTOR2. [Final Year Project]

Abd. Halim, Ahmad Faisal (2013) ANTIOXIDANT IN BITUMEN. [Final Year Project]

ABU AZRI, NOOR AZREEN (2013) A STUDY OF CHRISTIANSEN’S COEFFICIENT UNIFORMITY (CU) OF WATER DISTRIBUTION IN A SPRINKLER IRRIGATION SYSTEM. [Final Year Project]

Mohd Suhaimi, Ahmad Alif Adli (2013) Comparison of Degradation of Refinery Biomass Through Aerobic and Anaerobic Digestion. [Final Year Project]

Murshed Alyousefi, Nadhir Abdulwahab (2013) Mechanical Properties of Engineered Cementitious Composite Mixture. [Final Year Project]

VIJIA KOMAR, ANAND KUMAR (2013) CRITICAL REVIEW OF THE SUITABILITY OF SULPHUR AS A COMPONENT IN VARIOUS CIVIL ENGINEERING APPLICATIONS. [Final Year Project]

OTHMAN, NURFADHILAH (2013) PROFILING OF INDOOR AIR POLLUTANTS AND POSSIBILITY OF OZONE FORMATION. [Final Year Project]

Muhamad Roshdi, Azrulfirdaus (2013) Structural Assessment of Difficult Pipeline at Bends. [Final Year Project]

Mohd Salim, Mohammad Najib (2013) Economies in Structural Steel Design using Different Steel Grade. [Final Year Project]

AZIZAN, MUHAMMAD SYAHMI MAAROF (2013) STUDY OF MOTION RESPONSES OF THE H-TYPE FLOATING BREAKWATER. [Final Year Project]

SANI, NOOR FAIZAH (2013) THE EFFECTS OF POROSITY AND SATURATION ON ELECTRICAL RESISTIVITY AND STRENGTH OF SOIL FOR SAND SIZE PARTICLES. [Final Year Project]

Abu Bakar, Ahmad Safwan (2013) Prediction of Suspended Sediment Concentration in Kinta River Using Soft Computing Techniques. [Final Year Project]

MAKINE, AHMAT ABAKAR (2013) COMPARISON ON THE EFFECTS OF DIFFERENT FIBERS ON SELF-COMPACTING CONCRETE. [Final Year Project]

ABANG SAZALI, DAYANG FARZANAI (2013) FLUORESCENCE INTENSITY POSITIVITY CLASSIFICATION OF HEP-2 CELLS IMAGES USING FUZZY LOGIC. [Final Year Project]

MOHD HANAPI, HANIS SYAFIQAH IZZATI (2013) DEVELOPMENT OF MOTION CONTROLLER SYSTEM FOR AUTONOMOUS ROBOT. [Final Year Project]

Mustaffa, Mustamin (2013) A Wireless Sensor Network (WSN) To Remotely Monitor An Artificial Aquatic Ecosystem. [Final Year Project]

MOHD AZAM, MOHD KHAIRUL (2013) NEAR INFRARED IMAGING FOR SUBCUTANEOUS VEINS LOCALIZATION USING WEARABLE OPTICAL IMAGING DEVICE. [Final Year Project]

ISHAK, ZULYADAIN (2013) DESIGN AND FABRICATION OF WIRELESS OPERATED PAINTBALL ROBOT FOR MIROC 2014 COMPETITION. [Final Year Project]

Jamaluddin, Nurul Adila (2013) RETINAL MICROVASCULATURE EXTRACTION USING GABOR WAVELET. [Final Year Project] (Unpublished)

Abel , Belete Tadele (2013) Design of Millimetre Wave Band Pass Filter for Radio over Fibre Application. [Final Year Project] (Unpublished)

ABU MANSOR, AMIN FAHIM (2013) HEP-2 CELL IMAGES FLUORESCENCE INTENSITY CLASSIFICATION TO DETERMINE POSITIVITY BASED ON NEURAL NETWORK AMIN. [Final Year Project] (Unpublished)

AARON SCOTT , G. YUNSAI (2013) The Study of Third Harmonic Current Contribution during Ground Fault. [Final Year Project] (Unpublished)

NUR THANIA AWATIF BINTI MOHAMAD ROSDI, NUR THANIA AWATIF BINTI MOHAMAD ROSDI (2013) HEP-2 CELL FEATURE EXTRACTION USING WAVELET AND INDEPENDENT COMPONENT ANALYSIS. [Final Year Project] (Unpublished)

MD HASIM, SITI MASTURA (2013) FEATURES EXTRACTION OF HEP-2 IMMUNOFLUORESCENCE PATTERNS BASED ON TEXTURE AND REGION OF INTEREST TECHNIQUES. [Final Year Project] (Unpublished)

SERUJI, MOHD KHAIRUL ARIFFIN (2013) DESIGN AND ANALYSIS OF AN INTERFACING CIRCUIT FOR SOLAR CELL SYSTEM WITH AC LOAD. [Final Year Project] (Unpublished)

NASIB, ABDILLAH (2013) DEVELOPMENT OF CONTINUOUS REMOTE BLOOD PRESSURE MONITORING SYSTEM. [Final Year Project] (Unpublished)

Mohd Roki, Mohamad Alif (2013) USB DEVICE CONNECTIVITY USING PYTHON. [Final Year Project] (Unpublished)

Arvind Raj, Alfred (2013) DESIGN AND ANALYSIS OF DEFECTED GROUND STRUCTURE BAND PASS FILTER (DGS-BPF) FOR ENERGY HARVESTER APPLICATION. [Final Year Project] (Unpublished)

Cheam, Syeh Ren (2013) DEVELOPING ALGORITHM FOR OBJECT TRACKING USING PASSIVE SENSORS. [Final Year Project] (Unpublished)

Nasir Nasir, Muhamad Hasyeme (2013) “SEGMENTATION OF ANTI NEUTROPHIL CYTOPLASMIC ANTIBODIES (ANCA) IMAGES BASED ON WATERSHED AND WAVELET”. [Final Year Project] (Unpublished)

RAJARAM, JAYVARMAA (2013) A NEW SUPERVISORY CONTROL SYSTEM FOR DOMESTIC PROTECTION SYSTEM. [Final Year Project] (Unpublished)

SATHASIVAM, LUVENRAJ (2013) TUNING A THREE-PHASE SEPARATOR LEVEL CONTROLLER VIA PARTICLE SWARM OPTIMIZATION (PSO) ALGORITHM. [Final Year Project] (Unpublished)

Idris, Nazri (2013) AN AUTOMATED ELECTRICAL PROTECTION SYSTEMFOR THREE PHASE SYSTEM. [Final Year Project] (Unpublished)

Mohammad Nor, Shafiq (2013) MODELLING AND SIMULATION OF NUTRIENT DISPERSION FROM COATED FERTILIZER GRANULES. [Final Year Project] (Unpublished)

Haroon, Muhamad Soffi (2013) Development of Antenna for Outdoor Wireless Application. [Final Year Project] (Unpublished)

Abd Jalil, Mohd Taufik (2013) Data Fusion of Laser Range Finder and Video Camera. [Final Year Project] (Unpublished)

TINGOLFA, TEIHISSANDE (2013) ANALYSIS OF THE SIDE EFFECTS OF CELL PHONE ON THE BRAIN USING ELECTROENCEPHALOGRAM. [Final Year Project] (Unpublished)

Wan Rosli, Wan Salwani (2013) THE DEVELOPMENT OF ANTENNA FOR INDOOR WIRELESS LOCAL AREA NETWORK APPLICATION. [Final Year Project] (Unpublished)

Adnan, Muhammad Zulhilmi (2013) DESIGN OF IMPROVED GRID FOR TURTLE ROBOT. [Final Year Project] (Unpublished)

Alias, Muhammad Syeqal Alza (2013) Earthwork Simulation Using RTK GPS. [Final Year Project]

Mohd Pangi, Amalina (2013) CASE STUDY ON RESOURCE MANAGEMENT IN CONSTRUCTION PROJECT. [Final Year Project]

Haji Fakhrurrozy, Lam’ah (2013) Engineering Properties of Soil Stabilize with Cement. [Final Year Project]

Abu Bakar, Nur Azreen (2013) Fenton-ASBR Process for Treatment of Oil Exploration Plant Wastewater Containing Boron. [Final Year Project]

Yaakub, Norfazilah (2013) COMPRESSIVE STRENGTH OF BRICK WITH USED COOKING OIL. [Final Year Project]

Mazlan, Ruqayyah (2013) PERFORMANCE OF COMPOST TUMBLER IN THE TREATMENT OF TENORM (OIL SLUDGE). [Final Year Project]

HOOI, LIM YONG (2013) Low Power Bio-potential Amplifier (for EEG). [Final Year Project] (Unpublished)

Qianjun, Jong (2013) An Expert System for Rating Vulnerabilities. [Final Year Project]

Mohd Azami, Ahmad „Atif (2013) Universiti Teknologi PETRONAS (UTP) Food and Beverage Requisition System (General Administration). [Final Year Project]

MOHD NOOR, INTAN SOFFIA (2013) USER-CENTERED MOBILE APPLICATION FOR EMERGENCY SITUATION. [Final Year Project]

Azman , Aini Azlina (2013) Asthma Education Game for Children. [Final Year Project]

Abd. Kadir, Amira Natasya Farahana (2013) Senior Citizen Day Care Management Application for Nursing Staff. [Final Year Project]

Ahmad Zaidi, Aniz Syuhaiza (2013) Receipt Box: A Receipt Management System for Business Travelers. [Final Year Project]

Ira Iryani , Ira Iryani (2013) SENTIMENT ANALYSIS ON PRODUCT TWEETS. [Final Year Project]

Lau , Jason Kim Wee (2013) GuitarApprentice: A Mobile Application for Acoustic Guitar Learning using Fast Fourier Transform algorithm. [Final Year Project]

Mohd Sa‟ad, Arif Aizuddin (2013) Online Faraid Calculator System. [Final Year Project]

GILBERT, JOANNA MICHELLE (2013) IMPLEMENTATION OF RADIO FREQUENCY IDENTIFICATION (RFID) INTO THE MATRIC CARD TO FUNCTION AS E-WALLET. [Final Year Project]

Lau , See Leh (2013) A web-based project management system: sign-off documents management system (SOMs). [Final Year Project]

Mohd Dahalan, Muhammad Ariff (2013) Stationery Management System (General Administration System). [Final Year Project]

Samin , Muhammad Nur Arif (2013) Diabetes Management Self-Helper Mobile Application for Malaysian Type 2 Diabetes Patients. [Final Year Project]

Anuar, Asnawi (2013) MOTORCYCLIST APPLICATION – AN EMERGENCY TREAT. [Final Year Project]

Mohd Nadzri, Merissa Nazriana (2013) Identifying Terrorism-Related Postings in Twitter for Malay language. [Final Year Project]

Chan , Soo Ting (2013) Training Database Automation System. [Final Year Project]

Muhammad Muizzul Fadly Bin M.Mazlin, Muhammad Muizzul Fadly Bin M.Mazlin (2013) Malay Idioms and Proverbs Game for Android. [Final Year Project]

Shafie, Muhammad Munzir (2013) Bill of Materials Report Management System. [Final Year Project]

LAU, MUHAMMAD NAIM (2013) Parking Guidance System mobile application. [Final Year Project]

Cheong, Ai Leng (2013) MyAngel: An Auditory Android Mobile Application for Emergency with Location-based Service. [Final Year Project]

Hamid, Noor Hasomy (2013) Online Advertising – Profitable Keyword Recommender System. [Final Year Project]

Ng , Tong Wu (2013) EMERGENCY RESPONSE AND LOCATION TRACKING SYSTEM USING RADIO FREQUENCY IDENTIFICATION (RFID) TECHNOLOGY. [Final Year Project]

Azmi, Nuraimi (2013) Web-Based Solat Courseware for Children. [Final Year Project]

Syed Mokhtar , Sharifah Sarah (2013) Learning Malay Language as Secondary Language for Chinese Children Using M-Learning Application. [Final Year Project]

Mohammad Rushdi , Nasiratul Safiah (2013) Droid Queue Management System: Counter Service For Queue Management System. [Final Year Project]

ABDUL ALEEM, RAHMAT BEE (2013) SALES AND INVENTORY MANAGEMENT SYSTEM. [Final Year Project]

i Ahmad Zayadi, Puteri Intan Aishah (2013) MATCHING DISPLAYED ADS WITH USER QUERIES AND BROWSING BEHAVIOUR TO MEASURE USER SATISFACTION. [Final Year Project]

Azaman @Azman, Sara Shafrina (2013) First Aid Mobile App in Bahasa Melayu. [Final Year Project]

Yusof, Siti Sarah (2013) Application of Genetic Algorithm in solving Tourist Routing Problem. [Final Year Project]

MOHAMED AHMED KHALIFA, HADEER KHALED YEHIA (2013) An Interactive Augmented Reality Alphabet 3-Dimensional Pop-up Book For learning and Recognizing the English Alphabet. [Final Year Project]

Hashim, Mohamad Shamil (2013) Mobile Application on Halal Status Checking. [Final Year Project]

MOHAMAD SAN, NUR SYAFIQAH (2013) EXIT INTERVIEW APPLICATION for KNOWLEDGE CAPTURING APPROACH. [Final Year Project]

Wahid, Muhamad Syahir (2013) Automated Forex Trading Robot with FBH Robot On Metatrader 4 Platform (Expert Advisor). [Final Year Project]

Suman, Nur Nadzirah (2013) Mobile Blood Donor. [Final Year Project]

Mohamed Ali, Syuhada (2013) Recommender System for E-Business Website. [Final Year Project]

Zahari , Muhamad Fadhli (2013) Learning History with the Help of Stick Figures. [Final Year Project]

Zainuddin, Zaharatul Mardhiah (2013) AR Shapes: Making Contextual Learning Fun via Augmented Reality Book. [Final Year Project]

Jazni, Nur Farah Hani (2013) Pocket Library: Mobile Application for Personal Book Loan Management. [Final Year Project]

TEH , HONG TENG (2013) BUS LOCATOR SYSTEM (BLS). [Final Year Project]

Pozi, Siti Noor Fatihah (2013) Travel Guide in Malaysia Mobile Application. [Final Year Project]

TAY, ZHI WEI (2013) DROID QUEUE MANAGEMENT SYSTEM (DQMS). [Final Year Project]

Ahmad Faizul , Fatin Farhanah (2013) ONLINE DOA’ FROM AL-QURAN AND HADITH FOR MUSLIM KIDS. [Final Year Project]

Yusoff , Rizal (2013) E-MyKad : An Online Identity Representation System for Malaysia’s Internet Community. [Final Year Project]

Nadzari , Mohamad Ghazali (2013) Library Interactive Directory. [Final Year Project]

Roslan Affandi, Muhammad Hanis (2013) Learning Data Communication and Networking using Interactive Mobile Application. [Final Year Project]

Hashim, Hanis Iryani (2013) Synchronizing Audio and Haptic to Read Webpage. [Final Year Project]

HIPANI , NURUL HARMIZA (2013) AN APPLICATION FOR LEARNING CHINESE LANGUAGE AS A SECOND LANGUAGE: A PROPOSED DESIGN. [Final Year Project]

Isa Muddin , Hidayatun Nafisah (2013) Number Skills Mobile Application for Down Syndrome Children. [Final Year Project]

Shahimi, Muhammad Syamil (2013) Detection of Corrosion Under Insulation Using Infrared Thermography. [Final Year Project] (Unpublished)

Shummugham, Suntharesar (2013) VEHICLE DRIVETRAIN MODELING AND ANALYSIS FOR AN ADVANCED DRIVETRAIN OF A CITY CONCEPTCAR. [Final Year Project] (Unpublished)

ROSLI, RHAISHAZRIN AMIRUL IQMA (2013) Gear Faults Analysis Using Finite Element Method. [Final Year Project] (Unpublished)

ABDUL RAZAK, ABDUL FALIQ QUSHAIRI (2013) Estimating Solar Energy Potential in Perak using Clearness Index and Artificial Neural Network. [Final Year Project] (Unpublished)

ABDUL RAZAK, ABDUL FALIQ QUSHAIRI (2013) Estimating Solar Energy Potential in Perak using Clearness Index and Artificial Neural Network. [Final Year Project] (Unpublished)

Abu Bakar, Muhammad Al-Afiq (2013) Tensile Strength Of Polyester/Woven Kenaf Composites. [Final Year Project] (Unpublished)

ISMAIL, FAISAL (2013) Comparative Study of the Microstructure, Mechanical and Thermal Properties of Nitrided and Base Ferritic SS439 Stainless Steel Rod. [Final Year Project] (Unpublished)

Nordi, Nor Helmi (2013) Tensile Strength of Polyoxymethylene/Carbon Fiber/Glass Fiber Hybrid Composite. [Final Year Project] (Unpublished)

Norashid, Muhammad Syukri (2013) MICROSTRUCTURE AND MATERIAL FLOW INVESTIGATION OF DISSIMILAR FRICTION STIR WELDED PLATES. [Final Year Project] (Unpublished)

Nelson, Kevin (2013) Entrance Length of Polymer Flows. [Final Year Project] (Unpublished)

SAHAR, MOHAMAD ISKANDAR (2013) Vehicle Body Design and Analysis of a Practical, Fuel Efficient City Concept Car. [Final Year Project] (Unpublished)

ABD GAFAR, AMIR HAZWAN (2013) DEVELOPMENT OF RISK ASSESSMENT MODEL FOR GAS TURBINE. [Final Year Project] (Unpublished)

Aziz, Muhammad Farhan (2013) Minimizing Preventive Maintenance Costs of An Equipment in Oil and Gas (O&G) Industry. [Final Year Project] (Unpublished)

RAZALI, MOHAMAD FIRDAUS (2013) COOPERATIVE MANIPULATORS. [Final Year Project] (Unpublished)

ABD LATIF, MUHAMAD FAUZAN (2013) Effects of Biopolymer as Drag Reducing Agent on Characteristics of Crude Oil. [Final Year Project] (Unpublished)

DERAMAN, RAFFLELLA (2013) A Study on Blade Performance of Transverse Axis Wind Turbine Mounted on a Rooftop. [Final Year Project] (Unpublished)

EhsanulHaqGlani, Syed (2013) DESIGN AND FABRICATION OF WIND POWER EXPERIMENT LAB KIT. [Final Year Project] (Unpublished)

Claudius, Rick Raynold (2013) Fatigue Crack Initiation and Propagation on Nitrided Ferritic Surfaces in Stainless Steel 439. [Final Year Project] (Unpublished)

ZARAWI, ZULFADHLI (2013) Investigation of Malaysian Parang Manufacturing Quality Variation with respect to Chemical, Mechanical and Physical Properties. [Final Year Project] (Unpublished)

ZULKIFLI, MOHD AMRI AZRI (2013) Investigation on Sensitization of Nitrided AISI 316L Austenitic Stainless Steel at Intermediate Temperature. [Final Year Project] (Unpublished)

ABD JAMIL, AINI (2013) Co-gasification of Oil Palm Fronds, Wood Chips and Sugarcane Bagasse for Power Generation. [Final Year Project] (Unpublished)

Rizal Nikman, Erhan Nikman (2013) Preliminary investigation of corrosion surfaces under coating on a plate using IR thermal imaging camera. [Final Year Project] (Unpublished)

Bong, David (2013) Development of Thermoelectric Generator (TEG) For Energy Recovery in Perodua Myvi. [Final Year Project] (Unpublished)

Mohd Zulkepli, Muhamad Aarif Billah (2013) Mathematical Modelling to Predict Nitrided Layer Thickness of Low Temperature Gas and Plasma Nitriding of AISI 316 L Stainless Steel (Austenitic). [Final Year Project] (Unpublished)

SUFFIAN, MUHAMMAD HAZIM (2013) TOWARDS A MORE ACCURATE FLOW RATE ESTIMATION TECHNIQUE FOR OIL SPILLS FROM PIPELINES. [Final Year Project] (Unpublished)

PALANISAMMY, KALIDASAN (2013) THERMOELECTRIC AIR COOLING FOR CAR. [Final Year Project] (Unpublished)

CHE A. HALIM, FAHMI (2013) Characterization of Double-sided Friction Stir Welding (FSW). [Final Year Project] (Unpublished)

Azlan, Uzair Aslam (2013) Solar Passive Cooling: Solar Chimney for Natural Ventilation. [Final Year Project] (Unpublished)

Zammeri, Mohammad Farhan (2013) Experimental Characterization of the Absorptivity of Various Ground Materials for Solar Chimney Application. [Final Year Project] (Unpublished)

MOHD ZAMRI, MUHAMMAD ZUL IRFAN (2013) EXPERIMENTAL ANALYSIS OF COMPATIBILITY BETWEEN CORROSION INHIBITOR AND BIOCIDE USING ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY. [Final Year Project] (Unpublished)

Yahaya, Muhammad Syazwan Azrie (2013) Microstructure and Hardness Investigation of Different Welding Passes in Weld Zones. [Final Year Project] (Unpublished)

MD SHAHSAZIZAN, IKHWAN (2013) MODELING AND SIMULATION OF A PERPETUAL PIGGING MECHANISM. [Final Year Project] (Unpublished)

Rizal Nikman, Erhan Nikman (2013) Preliminary investigation of corrosion surfaces under coating on a plate using IR thermal imaging camera. [Final Year Project] (Unpublished)

Rosdi, Fatin Amalina (2013) Enhancement of Materials Surface Properties via Case Hardening Process: Metals Substrate in Silica Sand Bath. [Final Year Project] (Unpublished)

Abdul Malek, Raez Edriezal (2013) Design and Site Implementation of Hydro-electrifier. [Final Year Project] (Unpublished)

Nordin, Nazarul (2013) SOLAR WATER HEATER SYSTEMS FOR COMMERCIAL BUILDINGS. [Final Year Project] (Unpublished)

SARU @ SARUDDIN, MUHAMMAD ZUL „AFIF (2013) ENHANCEMENT OF MATERIALS SURFACE PROPERTIES VIA SURFACE COATING PROCESS: POLYMER SUBSTRATE IN SILICA SAND BATH. [Final Year Project] (Unpublished)

Hassan, Najibah (2013) Thermal Analysis of Carbon Fiber Composite Structure by Finite Element Analysis. [Final Year Project] (Unpublished)

Mohd Kamal, Eliya Farah Hana (2013) Effects of Alkali-Silane Treatment on Tensile Strength of Woven Kenaf Reinforced Polypropylene Composites. [Final Year Project] (Unpublished)

Haris, Farhana (2013) Comparative Study on the Mechanical and Physical Properties of Un-nitriding and Nitriding of 430 Ferritic Stainless Steel. [Final Year Project] (Unpublished)

Haris, farhana (2013) Comparative Study on the Mechanical and Physical Properties of Un-nitriding and Nitriding of 430 Ferritic Stainless Steel. [Final Year Project] (Unpublished)

Khamis, Kamarul Azrin (2013) Vehicle Scheduling System. [Final Year Project] (Unpublished)

Muhammad Idris, Muhammad Fareez (2013) OIL-SAND PARTICLES (SOLID-LIQUID) PASSIVE SEPARATION IN PIPING SYSTEM. [Final Year Project] (Unpublished)

AB MANAS, MOHAMAD FARIS (2013) STUDY ON THE EFFECTS OF BUTT WELD JOINT BEVEL ANGLES ON TENSILE PROPERTIES OF ALUMINUM ALLOY 6061. [Final Year Project] (Unpublished)

Awang Besar, Erfan Ruzalfian (2013) Development of Conceptual Design Support System for Mechanisms. [Final Year Project] (Unpublished)

HASAN AZHARI, MUHAMMAD (2013) DYNAMICS OF MAGNETICALLY SUPPORTED RIGID ROTOR IN AUXILIARY BEARING. [Final Year Project] (Unpublished)

Adnan, Nurfatin Ezzuni (2013) A study of hardness and the sensitization of nitrided martensitic stainless steel during cooling down process. [Final Year Project] (Unpublished)

Lee, Holinson (2013) EFFECT OF FUNCTIONALIZATION ON THE STRENGTH OF MULTI-WALL CARBON NANOTUBES-POLYPROPYLENE (MWCNTs-PP) COMPOSITE. [Final Year Project] (Unpublished)

Yahaya, Muhammad Syazwan Azrie (2013) Microstructure and Hardness Investigation of Different Welding Passes in Weld Zones. [Final Year Project] (Unpublished)

Mohd Yusoff, Nik Zul Syafiq Affandi (2013) THE EFFECTIVE DURATION OF GAS NITRIDING PROCESS OF AISI 316L. [Final Year Project] (Unpublished)

Mohd Puad, Mohd Munir Effendy (2013) Effects of Ultraviolet and Rain on the performance of Fire Retardant Coating. [Final Year Project] (Unpublished)

Razali, Mohamad Firdaus (2013) COOPERATIVE MANIPULATORS. [Final Year Project] (Unpublished)

Ping, Sharon Lee Lai (2013) Elementary process identification of solar carbon dioxide (CO2) fueling. [Final Year Project] (Unpublished)

KAMARUDIN, NAQIB HAKIM (2013) DEVELOPMENT OF FRAMEWORK USING GROUP TECHNOLOGY APPROACH IN ESTIMATING FABRICATION TIME OF SUBSEA MANIFOLD. [Final Year Project] (Unpublished)

ABU HAMIN, MOHD ZULKIFLY (2013) FINITE ELEMENT ANALYSIS OF RESIDUAL STRESS IN WELDED THICK PLATES OF A SINGLE V BUTT WELD WITH DIFFERENT INCLUDED BEVEL ANGLES. [Final Year Project] (Unpublished)

Ahmad Redzuan, Ahmad Zhafran (2013) Development of Redundancy Model for Co-generation Plant. [Final Year Project] (Unpublished)

Ragupathy, Panjaabegesan (2013) DIGITAL IMAGE CORRELATION APPLICATION IN TENSILE TEST FOR ALUMINIUM ACCORDING TO ASTM E-8 STANDARD. [Final Year Project] (Unpublished)

Mohamed, Hisyam (2013) COMPUTATIONAL FLUID DYNAMIC MODELLING OF FIRE INCIDENT. [Final Year Project] (Unpublished)

Mohd. Ariff, Mohd. Hazwan (2013) Characterizations of Sprays of Modified Starch Solution at Elevated Temperature for Particle Coating Application. [Final Year Project] (Unpublished)

REDUAN, ALLYA RADZIHAN BINTI REDUAN (2013) Performance Investigation of Transcritical Carbon Dioxide Refrigeration Cycle. [Final Year Project] (Unpublished)

Shahbudin, Mohamad Khairul Azwan (2013) Glass Fiber Reinforced-Fire Retardant Composites For Offshore Platforms Application. [Final Year Project] (Unpublished)

Azman, Usamah (2013) Analysis of Whirl Speed of Rotor-bearing System Supported on Fluid Film Bearing. [Final Year Project] (Unpublished)

Rosli, Ahmad Aizat (2013) INVESTIGATION OF THE IMPACT OF IMPERFECTION REPAIR AND MAINTANENCE TO SYSTEM AVAIBILITY. [Final Year Project] (Unpublished)

MOHAMAD KHAIRI, MUHAMMAD SYAFIQ (2013) COMPARATIVE STUDY ON HONEYCOMB STRUCTURE FOR WEIGHT REDUCTION OF GANGWAY MONORAIL. [Final Year Project] (Unpublished)

Yau Kin, Lau (2013) Energy Conservation in Buildings. [Final Year Project] (Unpublished)

Abdullah, Mohd Azmidi (2013) Teaching ADHD Kids using Augmented Reality. [Final Year Project] (Unpublished)

Jalilluddin, Amir Fahmi (2013) Development of Fatigue Reliability Model Using Spreadsheet (Steel Structures). [Final Year Project] (Unpublished)

Mohammad Latpi, Aliff Idham (2013) ENDURANCE INVESTIGATION OF NITRIDE FERRITIC STAINLESS STEEL SS439 UNDER TORSIONAL LOADING. [Final Year Project] (Unpublished)

HELMY, MOHAMED MAHMOUD ASHRAF (2013) PARAMETRIC SENSITIVITY ANALYSIS FOR THE PERFORMANCE OF STEAM JET EJECTOR. [Final Year Project] (Unpublished)

Adanan@Adnan, Ahmad Yumnie (2013) Controlling Sand Production Problem in Open-Hole Completion; a Case Study. [Final Year Project] (Unpublished)

Abd Koha, Mohd Muslim (2013) Subsea Production System (SPS) Control Modelling. [Final Year Project] (Unpublished)

Hamssin, Mohamad Fadzley (2013) ANALYSIS OF PINCH AND APPROACH POINT OF HEAT RECOVERY STEAM GENERATOR (HRSG) OF COGENERATION PLANT. [Final Year Project] (Unpublished)

MOHAMAD FARID, AIDIL AIZAT (2013) FACTORS AFFECTING PLASTERING EFFECT IN CASING WHILE DRILINNG. [Final Year Project] (Unpublished)

Sallahuddin, Ahmad Nadzrin Shah (2013) Development of an Excel Based Spreadsheet of Analytical Hierarchy Process And Decision Making Grid For Maintenance Policy Decision. [Final Year Project] (Unpublished)

MOHAMAD SAUPE, MUHAMMAD FARIS (2013) DIGITAL IMAGE ULCER ASSESSMENT ON SMARTPHONES. [Final Year Project] (Unpublished)

Mazlan, Muhamad Muaz (2013) Vibration control of rotor-shaft system with electromagnetic exciter. [Final Year Project] (Unpublished)

Loqman, Muhammad Aliff Ashman (2013) Conceptual Design Support Tool For Offshore Platform Jacket Design. [Final Year Project] (Unpublished)

Mohd Hashim, Mohamad Haziq Faiz (2013) INVESTIGATING THE EFFECT OF COIL PLATES ON THE PERFORMANCE OF FIRE TUBE STEAM PACKAGED BOILER USING SIMULATION SOFTWARE. [Final Year Project] (Unpublished)

DAHAN, MUHAMMAD FARHAN (2013) Frictional Contact Stress Analysis of Involute Spur Gear by Finite Element Method. [Final Year Project] (Unpublished)

Arizam, Muhammad Hafizuddin Adha (2013) FINITE ELEMENT ANALYSIS OF RESIDUAL STRESSES IN BUTT WELDING JOINT OF ASTM A36 PLATE AND ITS EFFECT ON FATIGUE CRACK GROWTH. [Final Year Project] (Unpublished)

RASIP, NASIRUDDIN ZHARIFF (2013) DESIGN FOR MANUFACTURING WITH RAPID PROTOTYPING. [Final Year Project] (Unpublished)

Kamisan, Mohamad Hafiz (2013) Monitoring of Copper, Lead and Nickel in Soil at Bemban Industrial Estate. [Final Year Project]

Aziz, Mohd Faez (2013) The Effect of Immersion Time on Biodegradation Rate Of Mg-Zn-Ca Alloy. [Final Year Project]

Mustafa, Nur Maizatul Mastura (2013) Parametric Studies of Carbon Dioxide Separation using Inline Separator: Effect of Concentration of Carbon Dioxide and Flow Rate of Mixed Gases. [Final Year Project]

Zainal, Muhammad Ashraf (2013) The Effect of Zinc Composition on the Degradation Rate of Magnesium Alloy for Developing Biodegradable Stent. [Final Year Project]

Mohamad Robi, Noorafenddey (2013) Extraction of Bio-ethanol from Waste Pineapple Peelings. [Final Year Project]

Mohamad Nor, Maizat-ul Fatiha (2013) Transient Simulation of Blood Flow in Brain Artery. [Final Year Project] (Unpublished)

Wan Saberi, Wan Muhamad Adib (2013) Adsorption of Lead from Aqueous Solution using Activated Carbon from Sawdust as Adsorbent. [Final Year Project] (Unpublished)

Abdullah, Khairul Ehsan (2013) Kinetic Study Of Removal Of Nitrate Using Mesoporous Silica As Absorbent. [Final Year Project] (Unpublished)

YIP, PUI MUN (2013) Simulation Study Of The Effect Of Smart Water On Relative Permeability During WAG-CO2 Injection For Light Oil Reservoir. [Final Year Project] (Unpublished)

Khairuddin, Khairunnisa (2013) Enhanced Assisted Water Alternating Gas Produced Water Reinjection Injectivity Study. [Final Year Project] (Unpublished)

Matraji, Herman Hari (2013) Study of Adsorption and Transport Behavior of Iron Oxide (Fe2O3) Nanofluids In Difference Porous Media. [Final Year Project] (Unpublished)

Wan Mat, Syarifah Suliza (2013) Optimization of Injection Well Placement in Faulted Reservoir for Water Flooding Process. [Final Year Project] (Unpublished)

Baharuddin, Alya Sorfina (2013) Experimental Study of Salinity Effects on Interfacial Tension between Carbon Dioxide and Brine. [Final Year Project] (Unpublished)

Abdul Rahman, Abdul Haziq (2013) COMPUTATIONAL FLUID DYNAMIC MODELLING OF CO2 LEAKAGE IN ABANDON WELL. [Final Year Project] (Unpublished)

Noorzi, Muhammad Izhan (2013) IMPROVING STABILITY OF WORMLIKE MICELLE USING NANOPARTICLES. [Final Year Project] (Unpublished)

Ismail, Mohamad Izzuddin (2013) Pipeline Corrosion in CO2 Environment with the Presence of High Amount Organic Acid. [Final Year Project] (Unpublished)

Kamal Saleh, Ahmed Mahmoud (2013) THE EFFECT OF USING DIFFERENT WEIGHTS OF CAUSTIC SODA ON THE WATER-BASE MUD DRILLING FLUID. [Final Year Project] (Unpublished)

Hajiberaheng, Sar-iyah (2013) Study on the Effects of Palm Oil Frond Ash (POFA) in Geopolymer Cement Properties. [Final Year Project] (Unpublished)

Mohd Nordin, Faiz Hazim (2013) FORMULATION OF SYNTHETIC DEMULSIFIER FOR WATER-IN-OIL EMULSION USING LOCAL RAW MATERIALS. [Final Year Project] (Unpublished)

AHMAD, MUHAMMAD TAUFIQ (2013) INVESTIGATION ON POLYPHENOLIC COMPOUNDS DERIVED FROM TROPICAL HERBS FOR INHIBITING SILICATE SCALES. [Final Year Project] (Unpublished)

Mohd Azman, Nur Fathin Munirah (2013) Experimental Investigation of the Effects of Size and Concentration of Nanoparticles on Shale Stability. [Final Year Project] (Unpublished)

Md Jusoh, Nur Zulaikar (2013) Near Wellbore Asphaltene Damage Stimulation Using Ultrasonic Technology. [Final Year Project] (Unpublished)

Hayisani, Butsaro (2013) INVESTIGATING THE VIABILITY OF LOCAL VEGETABLE OIL AS BASE FLUID FOR DRILLING HPHT FORMATION. [Final Year Project] (Unpublished)

RAJA ISMAIL, RAJA MUHAMMAD HAFIZI (2013) EXPERIMENTAL INVESTIGATION ON THE EFFECT OF LOW SALINE WATER (LSW) DURING FAWAG-CO2 ON LIGHT OIL. [Final Year Project] (Unpublished)

KHALID, SAIDAH NAFISAH (2013) GENERIC ENVIRONMENTAL IMPLICATIONS OF SHALE GAS PRODUCTION. [Final Year Project] (Unpublished)

Yusoff, Muhamad Zakwan (2013) MUD-WEIGHT PREDICTION FOR DEVIATED DRILLING. [Final Year Project] (Unpublished)

Abdul Hamid, Aishah Sakinah (2013) Modeling of Resistivity of Sand Pack and Core Injected with Nanoparticles. [Final Year Project] (Unpublished)

Ab Rahim, Mohd Ridzuan (2013) LOW FREQUENCY EM TRANSMITTERS FOR DETECTING DEEP TARGET HYDROCARBON. [Final Year Project] (Unpublished)

Mat Soh, Siti Hajar Aisyah (2013) NUMERICAL SIMULATION OF CRUDE OIL-WATER FLOW PHASE SEPARATION IN T-JUNCTION. [Final Year Project] (Unpublished)

Ismail, Mohamad Zamri (2013) PDC Drill Bit Design Improvement using Reverse Engineering Method to Analyze Effect on Rate of Penetration. [Final Year Project] (Unpublished)

Mustaffa, Mohammad Abdul Hakim (2013) Interfacial Tension Measurement near Wax Appearance Temperature. [Final Year Project] (Unpublished)

Azmi Rais, Muhammad Faris Akram (2013) Yttrium Iron Garnet (YIG) as Magnetic Nanoparticles for Enhanced Oil Recovery (EOR) using Electromagnetic Technique. [Final Year Project] (Unpublished)

Mohamad, Syamsul Syahiran (2013) Application of Flow Graph Theory Approach for the Solution of Discrete Lumped Kinetic Equation in Hydrocracking of Heavy Oils. [Final Year Project] (Unpublished)

Ramli, Mohd Syaifiillah (2013) Computational Fluid Dynamic (CFD) Simulation of Droplet Impact Behavior on Rough Surface. [Final Year Project] (Unpublished)

Tong, Yeong Yit (2013) Monoethanolamine (MEA) Wastewater Treatment via Adsorption using Activated Carbon Derived from Sawdust. [Final Year Project] (Unpublished)

Abdul Ghani, Muhammad Ridzuan (2013) Optimization of Ethanol Production from Mango Peels using Response Surface Methodology. [Final Year Project] (Unpublished)

Azam Mohar, Mohamad Faez (2013) Synthesis of Polyimide: Polymerization via Nucleophilic Substitution Reaction. [Final Year Project] (Unpublished)

Maria, Jeremy Sta (2013) Value Creation of Liquefied Petroleum Gas (LPG). [Final Year Project] (Unpublished)

Abdul Halim, Hazim (2013) Water Treatment for GDC UTP Chilled Water System by Using Physical and Chemical Approach. [Final Year Project] (Unpublished)

Zainal Abidin, Nor Asyiqin (2013) Investigation on the Rheology of Dilute Partially Hydrolyzed Polyacrylamide Solution. [Final Year Project] (Unpublished)

Wan Abdullah, Wan Muhammad Azli (2013) Modelling of Microtube Reactor In Bio-Fuel Production Using CFD. [Final Year Project] (Unpublished)

Ab Halim, Muhammad Ali Redza (2013) Multiple Cryogenic Packed Bed Dehydration and Separation ofC02 and Hydrocarbons from Natural Gas. [Final Year Project] (Unpublished)

Janai, Muhammad Aminuddin (2013) Enhanced Dehydration of Synthetic Gas Using Glycol Processes. [Final Year Project] (Unpublished)

Mohd Bukhari, Nur Ainda (2013) STUDY ON SORPTION OF MOISTURE BY THE ANADARA GRANOSA WASTE. [Final Year Project] (Unpublished)

AZMAN, IRSYAD AHNAF (2013) Simulations of Transient Fuel Gases Mixing in Air. [Final Year Project] (Unpublished)

Mohammad Noor, Mohd Amri (2013) Offshore Pipeline Reliability Assessment Using Degradation Analysis and P-F Interval Model. [Final Year Project] (Unpublished)

Ismail, Mohd Shahrul Ezwan (2013) Corrosion Behavior of Intumescent Coated Steel In Seawater Environment. [Final Year Project] (Unpublished)

Mohd Sukri, Eskandar (2013) High Pressure High Temperature (HPHT) Well Design. [Final Year Project] (Unpublished)

Abdullah, Siti Nur Hanis (2013) WAVE TRANSMISSION ON SUBMERGED BREAKWATER USING INTERLOCKING CONCRETE UNIT (ICU-V). [Final Year Project] (Unpublished)

Amy Ngu, Pei Jia (2013) LCA for Offshore Installations Decommissioning: Environmental Impact Assessment. [Final Year Project] (Unpublished)

Nik Man, Nik Fatimah (2013) THE STUDY OF DELAY AND SUCCESS FACTORS IN MALAYSIAN CONSTRUCTION INDUSTRY. [Final Year Project] (Unpublished)

JASON, CHUNG CHIN CHERN (2013) The Effect of Countdown Timer on Red Light Violation at Signalized Intersection. [Final Year Project] (Unpublished)

Awg Yusuf, Awang Khairul Amzar (2013) STUDY OF MOTION RESPONSES OF THE H-TYPE FLOATING BREAKWATER. [Final Year Project] (Unpublished)

Nordin, Nur Aqilah (2013) Oil Spill Cleanup using Raw Kapok as the Sorbent Material. [Final Year Project] (Unpublished)

EDDIE, CHANG JEE TED (2013) A STUDY OF SOLID CO2 FORMATION FROM RAPID FLUID EXPANSION USING CFD AND MATHEMATICAL MODELLING. [Final Year Project] (Unpublished)

Vasudevan, Satyasheelan (2013) Gasification and Characterization of Refinery Sludge Using Aspen Plus Simulation. [Final Year Project] (Unpublished)

Magasvran, Mahaganaapathy (2013) Analysis and Modelling of Pressure Exchangers. [Final Year Project] (Unpublished)

A. Rahman, Mohamad Suffian (2013) Synthesis and Characterization of Cobalt/Manganese Bimetallic Nanocatalyst Prepared via Reverse Microemulsion Method. [Final Year Project] (Unpublished)

Soffar, Hossam El-Sayed Mohamed Soffar (2013) NON-INVASIVE BRAIN EEG ROBOT NAVIGATION FRAMEWORK BASED ON EMOTIV EPOC. [Final Year Project] (Unpublished)

RAMADAN, MOATAZ ZOHEIR MOHAMED RAMADAN (2013) Data communication between Distributed Control System, Serial Device and Android App. [Final Year Project] (Unpublished)

ELDIN MOHAMED, AHMED MOHAMED GAMAL (2013) WIRELESS OFFSHORE PLATFORM STRUCTURAL HEALTH MONITORING. [Final Year Project] (Unpublished)

KURNIAWAN, YUHENDRI (2013) Development of Energy Management System (EMS) with Driver Interface for Retrofit-Conversion Hybrid Electric Vehicle. [Final Year Project] (Unpublished)

SIONG, HO CHIT (2013) Modelling and Simulation of Oil Production Tubing Dynamic and Static Characteristics due to Fluid Dynamic Loading. [Final Year Project] (Unpublished)

Seng, Sook Harn (2013) Hydrate Formation in Multiphase Flow in Pipe. [Final Year Project] (Unpublished)

Khairuddin, Muhammad Hariz (2013) Mechanical and Physical Effect of Nitriding AISI 316L Austenitic Stainless Steel at Various High Temperatures and Different Gas Nitriding Methods. [Final Year Project] (Unpublished)

A/L Krishnasammy, Puventhan (2013) Experimental Analysis Of Modified Roof Extractor For Wind Power Conversion In Solar Chimney Application. [Final Year Project] (Unpublished)

ABD AZIZ, AHMAD EZAT ADHA (2013) EXPERIMENTAL ASSESSMENT OF PREDICTIVE WAX DEPOSITION MODELS IN SIMULATION SOFTWARE. [Final Year Project] (Unpublished)

MOHD ZAKI, MOHD HAZIQ FARHAN (2013) Prediction of Bubble-point Pressure (Pb) and Formation Volume Factor (Bo) Using Group Method of Data Handling (GMDH) approach and the effect of reducing correlating parameters; a comparative study. [Final Year Project] (Unpublished)

ZOLKIFLEE, MOHD SYARMIZI (2013) BATTERY ALARM MONITORING SYSTEM. [Final Year Project] (Unpublished)

Wan Mohamed Kamsani, Wan Salwa Nadia (2013) Phoneme Based English Learning System. [Final Year Project]

Amran, Ammar Asyraf (2013) NotiFire : Hearing Impaired Alerter System Using Haptic Technology. [Final Year Project]

Eddy, Goh Tik Earn (2013) Automated Accident Location Detection System (Extended). [Final Year Project]

Khethiwe, Judith Mkhatshwa (2013) Synthesis and Characterization of Titania Photocatalyst Nano-particles of Controlled size and Shapes for waste water treatment. [Final Year Project] (Unpublished)

Setiawan, Yudi (2013) Analytical Study of Oil Recovery on Gas Lift and ESP Methods. [Final Year Project] (Unpublished)

Abdramane, Issa (2013) ROBOT IN A RECONFIGURABLE MAZE. [Final Year Project] (Unpublished)

Djibrillah , Oumarou (2013) SEISMIC DESIGN AND ANALYSIS OF MULTI STORY REINFORCED CONCRETE BUILDINGS IN MALAYSIA. [Final Year Project] (Unpublished)

Mohd Rosidi, Muhammad Rajhan (2013) Taguchi’s Parametric Design Approach for Determining the Significant Decision Variables in a Crude Distillation Unit (CDU). [Final Year Project] (Unpublished)

Jalil, Muhammad Azizulhariz (2013) TRAFFIC CONGESTION DETECTION USING WIRELESS SENSOR NETWORK. [Final Year Project] (Unpublished)

MOHAMED MOHIDEEN, ABDUL AZEEM (2013) THROTTLE-BY-WIRE (TBW) FOR RETROFIT CONVERSION OF HYBRID ELECTRIC VEHICLE (HEV) USING NI COMPACT RIO & LABVIEW. [Final Year Project] (Unpublished)

ANWAR, WATHIEQ AKRAM (2013) HEALTHCARE MONITORING SYSTEM USING WBAN. [Final Year Project] (Unpublished)

ABDUL RAHMAN, MUHAMMAD ZULFADHLI (2013) DESIGN AND IMPLEMENTATION OF EXTERNAL POWERING SOURCE FOR AN ACTIVE RFID TAG. [Final Year Project] (Unpublished)

SALAMAT, RABI’AHTULADAWIAH (2013) IDENTIFICATION SYSTEM FOR MALARIA PARASITE: PLASMODIUM VIVAX, USING MORPHOLOGICAL TECHNIQUES. [Final Year Project] (Unpublished)

ENGKUIN, PETROLLINA (2013) Solar Energy Harvesting for Self-Sustainable Wireless Sensor Network. [Final Year Project] (Unpublished)

Saharudin, Muhammad Naim Al Amin (2013) A STUDY OF ALUMINUM HONEYCOMB IMPACT ATTENUATOR FOR NEIGHBORHOOD ELECTRIC VEHICLES. [Final Year Project] (Unpublished)

Tan, Hui Xian (2013) Geopolymer based Oil Well Cementing Systems using Silica Fume. [Final Year Project] (Unpublished)

Mohammed, Badrulzzaman (2013) Nitriding of AISI 316L Austenitic Stainless Steel at Low Temperature for the Enhancement of Surface Properties and Corrosion Properties. [Final Year Project] (Unpublished)

Kolan De Velu, Bavani (2013) Study on Pile-Soil Failure Mechanism in the Assessment of Aging Jacket Platform. [Final Year Project] (Unpublished)

Ali Alhadhrami, Osamah Sadeq (2013) SHEAR STRENGTHENING OF RC T-BEAMS USING CARBON FIBER REINFORCED POLYMER (CFRP). [Final Year Project] (Unpublished)

Zainal, Muhammad Faiz Aizat (2013) Study on the Competency in Human Resources for Successful Completion of Construction Projects. [Final Year Project] (Unpublished)

Tuan Mood, Tuan Jazlan (2013) STUDY ON HEAVY VEHICLE (TRUCK AND TRAILER) CONFIGURATION IN MALAYSIA AND ITS IMPLICATION TO ACCIDENTAL IMPACT ON BRIDGE PIER DESIGN. [Final Year Project] (Unpublished)

Abd Razak, Muhammad Nur Dahlan (2013) Control of Groundwater Pollution from Bottom Ash Electro-Precipitation Process. [Final Year Project] (Unpublished)

Mohd Som, Siti Nazira (2013) “Enhancement of Nitrogen Removal in the Compact Extended Aeration Reactor (CEAR) by using Attached Growth System”. [Final Year Project] (Unpublished)

Ahmad Faizul, Muhammad Fakhrur Razi (2013) The Physical and Engineering Properties of 80/100 Bitumen with Carbon Black Additive. [Final Year Project] (Unpublished)

Khalid, Khalida (2013) The Physical and Engineering Properties of 60/70 Bitumen with Carbon Black Additives. [Final Year Project] (Unpublished)

Law, Ming Xian (2013) THE FATE OF DISCHARGED POLYCYCLIC AROMATIC HYDROCARBONS (PAHs) IN WATER STREAMS. [Final Year Project] (Unpublished)

Abdul Manan, Syafiqa (2013) Reliability-Based Maintenance System for Offshore Pipelines in Malaysia. [Final Year Project] (Unpublished)

BELDEN, CHIN CHUNG YEW (2013) SOLAR-STILL WATER PRODUCTION UNDER MALAYSIAN CONDITIONS. [Final Year Project] (Unpublished)

Mohamad, Amir Ehsan (2013) A Study on the Water Turbidity from Soil Erosion due to Rainfall under Different Percentage of Grass Cover. [Final Year Project] (Unpublished)

Idris, Fatin Nornabilah (2013) A CASE STUDY OF CARBON REDUCTION BEST PRACTICES AND BENCHMARKING IN THE MALAYSIAN CONSTRUCTION INDUSTRY. [Final Year Project] (Unpublished)

Ab Murad, Nur Atiah Nabilah (2013) Indoor Environmental Quality (IEQ) Assessment in Information Resource Centre (IRC) of Universiti Teknologi PETRONAS (UTP). [Final Year Project] (Unpublished)

YEO, CHIN YAP (2013) THE STUDY OF SUSTAINABLE CONSTRUCTION PRACTICES IN INFRASTRUCTURE PROJECTS. [Final Year Project] (Unpublished)

Lee, Hsiu Eik (2013) REDEFINING THE DESIGN OF TARPON MONOPODS FOR MARGINAL FIELDS. [Final Year Project] (Unpublished)

M Tan, Mark Dexter (2013) WAVE INTERACTION OF THE H-TYPE FLOATING BREAKWATER. [Final Year Project] (Unpublished)

Ab Rashid, Mohamad Azwan (2013) The Effect of Detention Pond’s Outlet Design to the Peak Discharge of a Watershed. [Final Year Project] (Unpublished)

Elsir Elyass Gaib Alla, Sara Tag (2013) Integrated Sequential Anoxic-Aerobic (ISA) Reactor for Wastewater Treatment. [Final Year Project] (Unpublished)

Jonathan, Wong Sie Chuan (2013) LOW AND MEDIUM SEISMIC EFFECT TO PILOTIS STRUCTURE IN MALAYSIA. [Final Year Project] (Unpublished)

Yunus, Mohd Syafiq (2013) Seismic Analysis on Multi-Storey Steel Structures in Malaysia. [Final Year Project] (Unpublished)

Iskandar, Nabila Aisyah (2013) Regression Analysis to Determine the Reserve Strength Ratio of Fixed Offshore Structures. [Final Year Project] (Unpublished)

MOHAMAD ZU, MOHAMAD ZULBAHARI (2013) ADSORPTIVE REMOVAL OF TEXTILE DYE DIRECT BLUE 86 FROM AQUEOUS SOLUTION BY RICE HUSK-BASED ADSORBENT. [Final Year Project] (Unpublished)

Sadek, Mohamad Mounes (2013) Top-of-Line Corrosion Prediction in Offshore Pipelines. [Final Year Project] (Unpublished)

ABDULLAH, UMI UBAIDAH (2013) DEVELOPMENT OF GEOPOLYMER CONCRETE BY INCORPORATING WATER LEACH PURIFICATION RSIDUE (WLP) WITH MICROWAVE INCINERATED RICE HUSK ASH (MIRHA) AND FLY ASH-BASED. [Final Year Project] (Unpublished)

Abdul Rahim, Mohamad Najib (2013) VULNERABILITY ASSESSMENT OF BLAST WALLS OF OFFSHORE STRUCTURE UNDER ACCIDENTAL EXPLOSION. [Final Year Project] (Unpublished)

Samsudin, Muhamad Azri (2013) The Ageing Effect of CFRP Plate Steel Members. [Final Year Project] (Unpublished)

ZULKIFLI, ZUL AIMAN (2013) ASSESSMENT OF MOUNTAIN RANGE EFFECTS IN PENINSULAR MALAYSIA TOWARDS CATCHMENT AND RAINFALL PRECIPITATION USING GIS SPATIAL ANALYSIS. [Final Year Project] (Unpublished)

LAWRENCE, LING HOE HO (2013) ADVANCED OXIDATION PROCESS FOR TREATMENT OF AQUEOUS SOLUTION CONTAINING POLYCYCLIC AROMATIC HYDROCARBONS (PAHS). [Final Year Project] (Unpublished)

AHMED NEZRI, AHMAD NUR SHAFIQ (2013) THE DURABILITY ASPECTS AND BOND STRENGTH OF RUBBERCRETE CONTAINING NANO SILICA. [Final Year Project] (Unpublished)

Yahya, Syeikh Nuzul Hazwan (2013) Solar Photocatalytic Degradation of Textile Dye Direct Blue 86 in ZnO Suspension. [Final Year Project] (Unpublished)

Mohd Zuber, Muhammad Azfar (2013) RTK GPS Performance Assessment for Long Baseline Deformation Monitoring. [Final Year Project] (Unpublished)

Ismail, Nur Azrin (2013) Dynamic Response of Mrr2 Bridge at Ampang. [Final Year Project] (Unpublished)

Dawam, Anis Dalila (2013) Enhancement of Organic Removal of Compact Extended Aeration Reactor (CEAR) by using Attached Growth System. [Final Year Project] (Unpublished)

SEFOLO, KAGISANO (2013) ADVANCED OXIDATION OF LANDFILL LEACHATE USING THE FENTON PROCESS TO REMOVE PAHs. [Final Year Project] (Unpublished)

Noordin, Nurin Adlina (2013) Assessment of Current Capacity of Local Service Providers in Offshore Decommissioning Waste Management in Malaysia. [Final Year Project] (Unpublished)

MOHAMAD RAHIMI, MD. FAZA (2013) CHARACTERIZATION OF SHALLOW LANDSLIDE THROUGH RAINFALL MODEL. [Final Year Project] (Unpublished)

MUHD FADHIL, HUZAIFAH (2013) UTILIZING RADIOACTIVE WATER LEACH PURIFICATION (WLP) IN SELF COMPACTING CONCRETE (SCC). [Final Year Project] (Unpublished)

Muthu, Rani Elizabeth (2013) MODIFIED BITUMEN FROM WASTE MATERIALS - RUBBER CRUMB & LOW DENSITY POLYETHYLENE (LDPE). [Final Year Project] (Unpublished)

Khairuddin, Noraini (2013) Performance Of Mangrove� Forest In Coastal Protection. [Final Year Project] (Unpublished)

Mohtar, Mohd Azlan (2013) Photoelectrochemistry of Solar Energy Capture and Conversion by Using Particulate Silicon Carbide Semiconductor. [Final Year Project] (Unpublished)

Salman, Muhammad Zaid (2013) Study of Iron Dispersion on Carbon Nanofiber via Deposition Precipitation Method. [Final Year Project] (Unpublished)

Ishak, Mohd Hanif (2013) Multivariate Process Monitoring Of Structural Changes in A CSTR System. [Final Year Project] (Unpublished)

Abdullatib, Nur Nabila Syahira (2013) Development of PES-SAPO Amine Mixed Matrix Membrane for Carbon Dioxide Removal. [Final Year Project] (Unpublished)

Mohd Yazri, Muhammad Hariez (2013) Development of Ionic Liquid Mixed Matrix Membrane (ILMMM) for Carbon Dioxide Removal. [Final Year Project] (Unpublished)

Adam, Nur Afiqah (2013) SAPO-34 Nanoparticles for CO2 Capture: Optimization of Synthesis Parameters. [Final Year Project] (Unpublished)

Ang , Ben Li (2013) Kinetic Modeling of Integrated Ammonia-Urea Production Process. [Final Year Project] (Unpublished)

Belal Magdy, Fathalla (2013) Enhancing Propane Refrigerant Performance at Pre-Cooling Stage During Hot Climate Conditions at LNG Plants – Case Study from Egypt. [Final Year Project] (Unpublished)

ZULKEFELY, NURUL IZZATY FAIZZEN (2013) EFFECT OF NANOFILLERS ON THE SPREADING BEHAVIOUR OF BIOPOLYMER BLENDS ON UREA SURFACE. [Final Year Project] (Unpublished)

DAVID, WONG SIONG MING (2013) AN EXPERIMENTAL STUDY OF NYLON RECYCLING AND ITS MODIFICATION USING HALOGEN BASED METAL HALIDES. [Final Year Project] (Unpublished)

RUSLI, MUHAMMAD NAJMUDDIN (2013) STUDY ON HYBRID PHOTOVOLTAIC AND THERMAL SOLAR POWER. [Final Year Project] (Unpublished)

Tunku Mahmud, Tunku Ozair (2013) Study of CO2/CH4 Solubility in Liquid Octane. [Final Year Project] (Unpublished)

SANTHA MOORTHY, VIVNESH KUMAR (2013) CATIONIC EFFECTS ON THE MORPHOLOGY OF HYDROTALCITE. [Final Year Project] (Unpublished)

Abd Aziz, Mohamad Amiry Erfi (2013) The Effect of Non-Newtonian Properties of Blood Flowing in Human Artery. [Final Year Project] (Unpublished)

Mohamad Jamaluddin, Mohd Zulkefli (2013) Modeling of Residual Removal from Palm Oil Mill Effluent by Ceiba Pentandra. [Final Year Project] (Unpublished)

Karim, Rose Amira (2013) Valorization of Biomass Waste to Produce Bioethanol. [Final Year Project] (Unpublished)

MOHD FADZLI, MOHD FAREEZ AKMAL (2013) A COMPARISON STUDY OF DIFFERENT EMPIRICAL MODELLING METHODS IN PREDICTING CO2 SOLUBILITY IN DIETHANOLAMINE, N-METHYLDIETHANOLAMINE AND THEIR MIXTURES. [Final Year Project] (Unpublished)

Suleiman, Muhammad Hafiz (2013) Kinetic Modelling of In-situ Catalytic Adsorptive Gasification Unit Utilizing Oil Palm Empty Fruit Bunch (EFB) and Palm Kernel Shell (PKS) for Hydrogen Production. [Final Year Project] (Unpublished)

Abdul Fatah, Nurul Safika (2013) Tuning PID Controllers for Processes with Difficult Dynamics. [Final Year Project] (Unpublished)

Jeremy Melvin, Amboi (2013) CFD Simulation for the Extraction of Blood Clot in the Middle Cerebral Artery Using GP2 Device through a 3 phase flow Model. [Final Year Project] (Unpublished)

Abdullah, Mohd Norshafizan (2013) Preparation and Characterization of Activated Carbon from Rubber Seed Shell via Chemical Activation Using Phosphoric Acid. [Final Year Project] (Unpublished)

Md Mustfa, Mohamad Khairulanuar (2013) Development of Chemical Resistant Geopolymer As Waste Storage Containing Hazardous Material. [Final Year Project] (Unpublished)

Tan , Meng Kiat (2013) Synthesis of Biodiesel from Ceiba Pentandra using Microwave Assisted Technique. [Final Year Project] (Unpublished)

Chia, Boon Chung (2013) Structural Arrangement of End Flash System for LNG Production. [Final Year Project] (Unpublished)

CHIN, YONG BAO (2013) REMOVING HEAVY METAL IONS FROM INDUSTRIAL WASTE WATER THROUGH AFC99, AFC40 & CA202 MEMBRANE. [Final Year Project] (Unpublished)

Leong, Dong Guo (2013) Study of the Rheological Properties of Various Oil-Based Drilling Fluids. [Final Year Project] (Unpublished)

Mohd Sam, Mohd Fathullah (2013) Safety Behaviours Assessment in Academic Institution: A Case Study in Unit Laboratory. [Final Year Project] (Unpublished)

SIM, SIANG LENG (2013) Ethylene Production from Bioethanol Dehydration over Bimetallic Alkaline Earth Oxide-Alumina Catalyst. [Final Year Project] (Unpublished)

Edmund, Soon Boon Thiam (2013) Effective Compliance Audit Model for Managing Process Safety in Process Industries. [Final Year Project] (Unpublished)

Jamil, Muhammad Fitri (2013) Jatropha Curcas L. for Phytoremediation of Landfill Soil. [Final Year Project] (Unpublished)

Pauzi, Ahmad Hafizi (2013) EXPERIMENTAL STUDY ON THE KINETICS OF GEOPOLYMER’S SOLIDIFICATION. [Final Year Project] (Unpublished)

JONG, YIK CHIENG (2013) SYNTHESIS AND CHARACTERIZATION OF BTDA-ODA AND BPDA-ODA MEMBRANE. [Final Year Project] (Unpublished)

Molly, Kueh Hui Ping (2013) Bio-Oil Yield from Fast Pyrolysis of Malaysian Bamboo via Drop Type Pyrolyzer. [Final Year Project] (Unpublished)

Lee, Chia Chun (2013) Taguchi’s Parametric Design Approach for Determining the Significant Decision Variables in a Condensate Fractionation Unit (CFU). [Final Year Project] (Unpublished)

Tan, Seng Yee (2013) Optimization in Iodine Value for Mixture of Edible and Non-Edible Oil for Epoxidation Process. [Final Year Project] (Unpublished)

Mackevin, Lim Chun Teck (2013) Dyed Wastewater Treatment via Ionic Liquids. [Final Year Project] (Unpublished)

Ramlee, Nur Liyana (2013) REMOVAL OF METAL IONS FROM AQUEOUS SOLUTION USING RICE HUSK-BASED ACTIVATED CARBON. [Final Year Project] (Unpublished)

Ismail, Zamilah (2013) Comparative Study on Raw and Modified Kapok Fibers as Sorbent Materials for Oil Sorption. [Final Year Project] (Unpublished)

Ivan, Liaw SheanYik (2013) Investigation of the Flow Behavioral Dynamics of Ammonia Component Gases in a Microreactor via Computational Fluid Dynamics (CFD) Approach. [Final Year Project] (Unpublished)

Lim, Hung Chiek (2013) Prediction of Viscosity of Ionic Liquids using Different Equations. [Final Year Project] (Unpublished)

I NYOMAN , PRASETYA PERMANA (2013) Removal of Fluoride from Drinking Water Using Egg Shells. [Final Year Project] (Unpublished)

Shahrin, Nur Eliana (2013) Comparative Study of Correlation for the Densities of Ionic Liquids. [Final Year Project] (Unpublished)

Ahmad Sayukhi, Muhammad Hafiz 'Arif (2013) Synthesis of Ionic Liquid Polymer Incorporating Activated Carbon for Carbon Dioxide (CO2) Capture and Separation. [Final Year Project] (Unpublished)

Azmi, Muhammad Izzat (2013) Measurement of Wetting Efficiency in Packed Tower Using Stimulus Response Technique. [Final Year Project] (Unpublished)

Win Sin, Chong (2013) Investigation of Degradation of Starch Complex for CRF Application. [Final Year Project] (Unpublished)

LEONG, WAI CHUN (2013) DESIGN OF A 2x2 LINEAR MPC SCHEME FOR A SOLID OXIDE FUEL CELL. [Final Year Project] (Unpublished)

Jariol Paylaga, Hannah Blanca (2013) STUDY OF ADSORPTION DEMIXING HEAT TRANSFORMER WORKING ON PARTIALLY MISCIBLE MIXTURE. [Final Year Project] (Unpublished)

Suhaimi, Muhammad Amirrul Zamani (2013) Prediction of Carbon Dioxide solubility in aqueous Methyldiethanolamine (MDEA) solution – A Kent-Eisenberg approach. [Final Year Project] (Unpublished)

TAN, ET KUAN (2013) STUDY OF PRESSURE AND COMPOSITION EFFECT ON MULTICOMPONENT MEMBRANE SEPARATION INVOLVING HEAVY HYDROCARBON GAS PENTANE. [Final Year Project] (Unpublished)

Sukarman, Khairul Amir (2013) Investigation of Various Local Fungi for Biomass Digestion. [Final Year Project] (Unpublished)

Ahmad Nizam, Hazlami (2013) Solar-driven Desalination by Humidification-dehumidification (Prototype Fabrication). [Final Year Project] (Unpublished)

Sallehuddin, Nur Syazwin (2013) Evaluation of Oxidizer Based Emulsifier for Diesel /Hydrogen Peroxide Blend. [Final Year Project] (Unpublished)

Huong Tiing, Michelle Lee (2013) Development of Citric Acid Cross-Linked Starch for Controlled-Release Fertilizer (CRF). [Final Year Project] (Unpublished)

Muhammad, Mohammad Firdaus (2013) The Effect of Temperature and Concentration on Corrosion Inhibition of Mild Steel in Carbon Dioxide Saturated Solution. [Final Year Project] (Unpublished)

Mat Ali Napiyah, Nurul Jannah (2013) Further Analysis on Quality of Drinking Water in State of Perak. [Final Year Project] (Unpublished)

Ibrahim, Mohammad Jeffrey (2013) Sulfonation Reaction for the Synthesis of Anionic Surfactants for Enhanced Oil Recovery (EOR) Application. [Final Year Project] (Unpublished)

Wen Wen, Karen Hii (2013) CRYOGENIC MULTIPLE BED BASED DEHYDRATION AND CO2 SEPARATION DURING PURIFICATION OF NATURAL GAS. [Final Year Project] (Unpublished)

Saad, Nur Diyana (2013) Hydrogenolysis of Glycerol to Produce 1,3-Propanediol. [Final Year Project] (Unpublished)

MUNIANDY, KATHIRAVEN (2013) Non-Newtonian Computational Fluid Dynamics (CFD) Modeling on Blood Clot Extraction. [Final Year Project] (Unpublished)

Low, Wan Lin (2013) Surface Engineering of Cellulose for Phenols and 2,4-Dichlorophenoxyacetic Acid (2,4-D) Removal. [Final Year Project] (Unpublished)

Sulaiman, Mohammad Norazry (2013) Drying of Ionic Liquid. [Final Year Project] (Unpublished)

Borhan, Mohd Ikram Solehuddin (2013) Design of Simplified Model Predictive Controller. [Final Year Project] (Unpublished)

Mazri, Mohd Zafri (2013) Cold Energy Utilization from LNG Regasification. [Final Year Project] (Unpublished)

MAMAT, MOHD ZAIDI (2013) TRANSESTERIFICATION OF RUBBER SEED OIL USING HETEROGENEOUS CATALYST. [Final Year Project] (Unpublished)

DAINURE, MUHAMMAD FIRDAUS (2013) PROCESS SIMULATION OF CRUDE OIL STABILIZATION SYSTEM : AN INDUSTRIAL CASE SUDY. [Final Year Project] (Unpublished)

Jinal, Mohd. Ridzhuan (2013) Oxidative Dusulfurization of Dibenzothiophene from Model Oil (dodecane) using [bmim][Cl] as an Extracting Agent. [Final Year Project] (Unpublished)

Che Ani, Noraishah (2013) Structural Evaluation of Zeolite Imidazolate Framework 8 (ZIF-8) Nanoparticles as Adsorbent for Carbon Dioxide Removal. [Final Year Project] (Unpublished)

Ong, Yu Han (2013) The Effect of Using Hydrogen Peroxide as Fuel Oxygenates for Enhancing Combustion Performance. [Final Year Project] (Unpublished)

Hoong, Phoon Kok (2013) Biosorption of Heavy Metal Ions from Industrial Waste Water by Banana Peel Based Biosorbent. [Final Year Project] (Unpublished)

RITCHIE, LIM LI ZHI (2013) EFFICIENCY OF DIISOPROPANOLAMINE (DIPA) DEGRADATION WITH DIFFERENT VISIBLE LIGHT INTENSITIES UNDER PHOTO-FENTON OXIDATION. [Final Year Project] (Unpublished)

Nurkunasegran, Nurkunasegri Devi (2013) A Small-Scale Study on the Time Taken For Burning Fuel to Boilover. [Final Year Project] (Unpublished)

KAMARULZAMAN, SHAMEEN AIDA (2013) DEHYDRATION OF NATURAL GAS ON ZEOLITE. [Final Year Project] (Unpublished)

St. Antikira, Novichaka (2013) The Effect of Ultrasonic Treatment on the Formation of Zeolite-T and Its CO2 Adsorption Characteristic. [Final Year Project] (Unpublished)

Khalil, Muhammad Hanif (2013) Study on the Polymer Solution Strength through the Modulus Behaviour. [Final Year Project] (Unpublished)

Chiang Jinn, Tan (2013) Determination of Optimum Condition for The Production of Rice Husk-Derived Bio-Oil by Slow Pyrolysis Process. [Final Year Project] (Unpublished)

Jun Yi, Thian (2013) Kinetic Parameter Estimation of Ammonia Synthesis Using Hybrid Dynamic Global and Local Combined Particle Swarm Optimization. [Final Year Project] (Unpublished)

MAZLAN, MUHAMMAD FARID (2013) Optimization of Ethanol Production from Waste Bananas. [Final Year Project] (Unpublished)

Thian, Jun Yi (2013) Kinetic Parameter Estimation of Ammonia Synthesis Using Hybrid Dynamic Global and Local Combined Particle Swarm Optimization. [Final Year Project] (Unpublished)

Xolile, Petunia Msimanga (2013) Physical Solubility of Carbon Dioxide in Decane (C10H22) Solvent from a CO2/CH4 System. [Final Year Project] (Unpublished)

Yiin , Chung Loong (2013) Stabilization of Empty Fruit Bunch (EFB) Derived Bio-oil. [Final Year Project] (Unpublished)

Ahmad Zulfa, Zahidah (2013) Preparation of Activated Carbon from Durian Shells Using Fixed Bed Activation Unit for Dye Removal Application. [Final Year Project] (Unpublished)

MOHD SAHAILIN, MOHD FADZLIN (2013) ANALYSIS OF LINEAR CONTROL FOR NONLINEAR SYSTEM: CONTINUOUS STIRRED TANK REACTOR (CSTR). [Final Year Project] (Unpublished)

Eula Rica, Cagas Bisconde (2013) Immobilization of Waste by Cement and Rice Husk Ash. [Final Year Project] (Unpublished)

Abdul Ghani, Muhammad Asif (2013) SOLUBILITY OF CO2 IN IMIDAZOLIUM BASED IONIC LIQUIDS USING ACETATE AND BIS(TRIFLUOROMETHYLSULFONYL)IMIDE AS ANION. [Final Year Project] (Unpublished)

SHAFFIE, SITI SAKINAH BINTI SHAFFIE (2013) PORTABLE ATTENDANCE SYSTEM FOR UNIVERSITY STUDENTS. [Final Year Project] (Unpublished)

SOOMRO, WAFA ALI SOOMRO (2013) OPTIMIZATION OF PID CONTROLLER PARAMETERS USING ARTIFICIAL FISH SWARM ALGORITHM. [Final Year Project] (Unpublished)

Zainal Abidin, Mohd Zulfadzlie (2013) SPECKLE NOISE REDUCTION USING MULTISCALE LMMSE (MLMMSE)-BASED FILTER. [Final Year Project] (Unpublished)

AZMAN, AZRUL REZUAN (2013) DESIGN OF A HOME AUTOMATION SYSTEM USING ARDUINO WITH WIRELESS CONTROL. [Final Year Project] (Unpublished)

MOHD RIFAN, MOHD HARIZ (2013) CONTROLLING AND MONITORING OF SERVO MOTOR THROUGH EMBEDDED HTTP SERVER ON ARM BOARD. [Final Year Project] (Unpublished)

Choi , Y ee Xiong (2013) A Study on the Effect of Steam Leakage to the Heat Rate of Steam Power Plant. [Final Year Project] (Unpublished)

Mohd Aris, Nursyarmimi Liyana (2013) DETECTION OF MICROANEURYSMS TO INDICATE THE DIABETIC RETINOPATHY DISEASE. [Final Year Project] (Unpublished)

MOHD SANI, MUHAMMAD IZZUDDIN (2013) DESIGN AND IMPLEMENTATION OF BLOOD PRESSURE MONITORING SYSTEM. [Final Year Project] (Unpublished)

MOHAMAD JEMURI, NURUL HUDA SAFFRY (2013) 3D CRANE. [Final Year Project] (Unpublished)

Rajendra Prasath, Agashtteeya (2013) REAL TIME DATA ACQUISITION AND MONITORING OF PATIENTS WITH CORONARY HEART DISEASE IN A HOME ENVIRONMENT. [Final Year Project] (Unpublished)

BAHATIM, AMMAR KAMARUL (2013) An Investigation of Wireless Electricity for Small Battery Charger. [Final Year Project] (Unpublished)

SULIMAN MANSOUR, KHALID ABD ALWAHAB (2013) DESIGN, MODELING AND CHARACTERIZATION OF A PIEZOELECTRIC ENERGY HARVESTING DEVICE. [Final Year Project] (Unpublished)

ABDUL MAJID, AZMEER (2013) BATTERY MANAGEMENT SYSTEM FOR ELECTRIC VEHICLE PASSIVE CELL BALANCING ON LITHIUM ION POLYMER BATTERY. [Final Year Project] (Unpublished)

MASHHOR, MUHAMMAD RUSYDI (2013) IMPLEMENTATION OF THERMOELECTRIC GENERATOR MODULE AS EXTERNAL ENERGY SOURCE TO RFID TAG. [Final Year Project] (Unpublished)

AZIZAN, SITI ROSMA (2013) DRIVER FATIGUE ACCIDENT PREVENTION USING EYE BLINK SENSOR. [Final Year Project] (Unpublished)

AHMAD, NUR SYAFIQAH (2013) INTELLIGENT ADS. [Final Year Project] (Unpublished)

RIDZUAN, MOHD AMIN (2013) SYSTEM FOR ANALYZING FLUID VELOCITY IN HEAT EXCHANGER. [Final Year Project] (Unpublished)

Abdalla Jobbara, Mohnad Ibrahim (2013) POWER SYSTEM STUDY ON INTEGRATING WIND AND PV POWER TO THE GRID SYSTEM. [Final Year Project] (Unpublished)

MOHD YOHANI, SITI NURSHAFIQA (2013) ANALYSIS OF THE EFFECTS ON HUMAN BRAIN DUE TO VARIOUS LEVELS OF DEPTH IN 3D TV. [Final Year Project] (Unpublished)

MOHAMED IDRISS, OMNIA ADIL (2013) 1.45GHz-1.55GHz Tunable RF Band-pass Filter. [Final Year Project] (Unpublished)

AHMAD TAJUDDIN, NUR SYAZANA (2013) Feasibility Study for Implementation of Renewable Energy Based Electricity Generating System. [Final Year Project] (Unpublished)

Abou El Rish, Ahmed Mohamed Said (2013) Designs of Boiler Burner Management System. [Final Year Project] (Unpublished)

Ibrahim, Mohamed Farouk (2013) The Effect of Pressure on the Dissolution of Cellulose in Ionic Liquids. [Final Year Project] (Unpublished)

MOHAMED, MOHAMED ADAM OSMAN (2013) DETERMINATION OF THE AREA AFFECTED BY THE SPREAD OF BURNING FUEL DUE TO BOILOVER. [Final Year Project] (Unpublished)

Ng, Pei Ying (2013) Dynamic Modelling and Simulation of Non Isothermal Reactors. [Final Year Project] (Unpublished)

Othman, Muhammad Nurdin (2013) HYDRODYNAMICS BEHAVIOUR OF SIMULATION OF ONE-STEP UREA SYNTHESIS IN MICROREACTOR. [Final Year Project] (Unpublished)

MOHD NOOR AZMI, MUHAMMAD AKRAM SAFIQ (2013) Effect of Calcination Parameters on Structural Properties and Activity of Carbon Nanofiber-Supported Cu/ZrO2 Catalyst in CO2 Hydrogenation to Methanol. [Final Year Project] (Unpublished)

MAMAT, NORSHAHIDATUL AIN (2013) INVESTIGATION ON THE IMPACT OF MOBILITY ON TOPOLOGY CONTROL FOR WIRELESS SENSOR NETWORKS (WSNs). [Final Year Project] (Unpublished)

JOHAR, AIMI NURAMIRAH (2013) ELECTRONIC TURBIDITY MEASUREMENT SYSTEM BY USING LIGHT DEPENDENT RESISTOR. [Final Year Project] (Unpublished)

Samin, Liyana Izzati (2013) CARBON DIOXIDE LEVEL DETECTOR FOR INDOOR AIR. [Final Year Project] (Unpublished)

CHUA, CHUA PEI FEN (2013) VIDEO SURVEILLANCE BASED ON RISK MAP. [Final Year Project] (Unpublished)

GAN, GAN DENSON (2013) DESIGN OF LTE-ADVANCED MICROWAVE COMBLINE FILTER. [Final Year Project] (Unpublished)

YEE, YEE YUN HUAN (2013) DESIGN OF 10 GHZ MICROWAVE OSCILLATOR. [Final Year Project] (Unpublished)

TEE, TEE YI TECK (2013) CARD EMULATOR FOR DOOR ACCESS USING ANDROID PLATFORM. [Final Year Project] (Unpublished)

ABU HASIM, NURFAIZAH (2013) ELECTRONIC NOSE (E-NOSE) DESIGN. [Final Year Project] (Unpublished)

MUZAFAR, FARAHDYANA (2013) SECURED LOCALIZATION FOR WIRELESS NETWORK USING ZIGBEE COMMUNICATION STANDARD. [Final Year Project] (Unpublished)

CHAN, CHAN NING JIAN (2013) WIRELESS HOME AUTOMATION LIGHTING SYSTEM USING ANDROID APPLICATION. [Final Year Project] (Unpublished)

MOHD AZIZ, SITI SARAH AZREEN (2013) AUTOMATED QUANTIFICATION AND CLASSIFICATION OF MALARIA PARASITES IN THIN BLOOD SMEARS. [Final Year Project] (Unpublished)

CHE AZIZ, NUR SYAMIMIE (2013) HYBRID RENEWABLE ENERGY BASED ELECTRICITY GENERATING SYSTEM. [Final Year Project] (Unpublished)

ABD FATAH, WAHYU HIDAYAT (2013) ROBOTIC ARMS MOVEMENT USING ELECTROENCEPALOGRAM (EEG). [Final Year Project] (Unpublished)

MOHAMAD FAROK, MUHAMAD ANAS (2013) “Brushless In-Wheel Motor System (IWM) For Retrofit Conversion of Hybrid Electric Vehicle (HEV)”. [Final Year Project] (Unpublished)

MOHD AZHAR, MUHAMMAD AFHAM (2013) DESIGN AND IMPLEMENTATION OF HEART RATE MONITORING SYSTEM USING WIRELESS TECHNOLOGY. [Final Year Project] (Unpublished)

SOPIAN, SHAZLIN AFIZA (2013) ANALYZING EFFECTS OF 3D VIDEO GAMES CONTENTS USING ELECTROENCEPHALOGRAPHY (EEG). [Final Year Project] (Unpublished)

Mohamed Zaini, Muhammad Aizat (2013) LABVIEW BASED USER INTERFACE FOR ENERGY FORECAST SOFTWARE WITH ANDROID INTERFACING. [Final Year Project] (Unpublished)

ABDULLAH, ABD MANSOR (2013) DESIGN AND IMPLEMENTATION OF VIBRATION BASED ENERGY HARVESTER SYSTEM ON MOVING MOTORCYCLE: WIRELESS SENSOR NETWORK. [Final Year Project] (Unpublished)

Hamzah, Adiff Nafillah Azlizah (2013) Evaluation of Modified Kent-Eisenberg Model to Predict Carbon Dioxide Solubility in Methyldiethanolamine (MDEA) Under Extended Operating Conditions. [Final Year Project] (Unpublished)

Huei Ming, Low (2013) Numerical Simulation of Two-phase Separation in T-junction. [Final Year Project] (Unpublished)

SA’AT, MOHD NAJIB (2013) THERMAL CHARACTERIZATION OF JATROPHA BASED BIODIESEL BLEND WITH FOSSIL DIESEL USING TGA. [Final Year Project] (Unpublished)

Zainudin, Muhammad Afif (2013) IMPROVING OF MANUFACTURING PRODUCTIVITY THROUGH SIMULATION. [Final Year Project] (Unpublished)

Mansor, Amnah Bashirah (2013) Study of Characteristics of Contaminants during Eggs Hatching Using Incubator. [Final Year Project] (Unpublished)

Ismail, Izat Emir (2013) Mechanical Properties of Drilling Defect Induced Glass Fiber Epoxy Composites Developed By Resin Infusion Technique. [Final Year Project] (Unpublished)

Abd Karim, Muhammad Amin (2013) The Development of Reliability Analysis Toolkit (RAT) For Analyzing Plant Maintenance Data. [Final Year Project] (Unpublished)

Wan Mohd Noh, Wan Najlin (2013) Surface Roughness of Stainless Steel by Micro-Milling for Biomedical Applications. [Final Year Project] (Unpublished)

Mohd Arif, Muhammad Nor Hakim (2013) Mechanical Design and Dynamic Analysis of Pipe Crawling Robot for Internal Gas Pipeline Inspection. [Final Year Project] (Unpublished)

Sia An An, Clare Marie (2013) DYNAMIC ANALYSIS OF A RECIPROCATING COMPRESSOR. [Final Year Project] (Unpublished)

AB RAZAK, NIK MOHD HAFIZZAL (2013) ENERGY RECOVERY HEAT EXCHANGER PERFORMANCE IN BUILDING’S AIR CONDITIONING SYSTEM. [Final Year Project] (Unpublished)

Norahmad Shah, Amira Nabilla (2013) Development of Maintainability Analysis Toolkit (MAT) for Analysing Plant Maintenance Data of Gas Processing Plant at Operational Phase. [Final Year Project] (Unpublished)

Talipov, Rustam (2013) ANALYTIC HIERARCHY PROCESS APPROACH FOR SELECTION AND EVALUATION OF MAINTENANCE STRATEGY. [Final Year Project] (Unpublished)

KEAT, BEH HARK (2013) THE DESIGN OF STRUCTURE FOR LIFTING HEAVY LOAD. [Final Year Project] (Unpublished)

Kamaruddin, Nur Zatil Ilham (2013) Tensile Strength of Woven Kenaf Reinforced High Density Polyethylene (HDPE) Composites. [Final Year Project] (Unpublished)

Shamsudin, Nur Ain Syafiqah (2013) Infrared Thermography Inspection on Potential Failures of Rotating Equipment. [Final Year Project] (Unpublished)

Anuar, Nor Hazwani (2013) Physical Properties of Rice Husk Packaging Material. [Final Year Project] (Unpublished)

Aminudin, Muhammad Syahmi (2013) Analysis of Carbon Dioxide (CO2) Emission by Heat Recovery Steam Generator (HRSG). [Final Year Project] (Unpublished)

Afandi, Muhammad Syafiq (2013) The Study of Flow Dynamics in Long Pipeline for the Transport of Carbon Dioxide (CO2). [Final Year Project] (Unpublished)

Mansor, Muhammad Fadhil (2013) NATURAL CONVECTION HEAT LOSS IN BUILDINGS. [Final Year Project] (Unpublished)

Zulkifli, Siti Nadiah (2013) Cornering Stability Analysis of Double Decker Bus at KM15 of Cameroon Highlands – Simpang Pulai Road. [Final Year Project] (Unpublished)

ABDUL HAMID, MUHAMMAD HAZIEM (2013) EXPERIMENTAL STUDY ON PIPE FLUID INDUCED VIBRATION. [Final Year Project] (Unpublished)

Razlan, Muhammad Fudzail (2013) Coordination of Multiple Mobile Robots. [Final Year Project] (Unpublished)

Kah Ling, Isabel Goh (2013) Estimation of Time between Failures and Time to Repairs of a Repairable System Based On Performance Data. [Final Year Project] (Unpublished)

MOHD SALEH, MOHAMMAD IZZAT (2013) GAS TURBINE PERFORMANCE AT VARYING AIR INLET TEMPERATURE. [Final Year Project] (Unpublished)

PATTHI, HAMDAN (2013) DEVELOPMENT OF EXCEL-BASED RELIABILITY MODEL FOR SYSTEMS WITH INCREASING/DECREASING FAILURE RATES. [Final Year Project] (Unpublished)

Mohd Zolkafly, Muhammad Ariff Zaky (2013) Reverse Engineering of PDC Drill Bit. [Final Year Project] (Unpublished)

Ahmed Elmahdi, Anas Elrayah (2013) Study of Performance Enhancement of a Building in Tropical Climate. [Final Year Project] (Unpublished)

SHARIFUTDIN, NUR SALAM (2013) A STUDY OF TORQUE VECTORING AND TRACTION CONTROL FOR A PARALLEL SPLIT HYBRID ELECTRIC VEHICLE. [Final Year Project] (Unpublished)

MdYunus, Ahmad Faiz (2013) COMPARATIVE STUDY ONMANUFACTURING PROCESSES OFA SWIRLER CASING. [Final Year Project] (Unpublished)

MOHAMAD NOOR IMAN, Mohd Nor (2013) A STUDY OF TORQUE VECTORING AND TRACTION CONTROL FOR AN ALL-WHEEL DRIVE ELECTRIC VEHICLE. [Final Year Project] (Unpublished)

Abd El-Aziz, Omar Eid Khorshed (2013) Subsea Production Control System Modelling. [Final Year Project] (Unpublished)

Ibrahim, Muhammad Syaril Azril (2013) Identification and Characterization of Corrosion Scale of Cooler Heat Exchanger. [Final Year Project] (Unpublished)

Abdul Hamid Albakri, Mohammad Faris Al Hanis (2013) A Study of Chemical Compatibility between Corrosion Inhibitor and Biocide in Offshore Application. [Final Year Project] (Unpublished)

Abdul Kadir, Mohammad Faizal (2013) DESIGN SUBSEA POWER GENERATION SYSTEM. [Final Year Project] (Unpublished)

Abdul Manan, Muhammad Aiman (2013) Effectiveness of Air and Biomass Heating using Waste Heat from a Gasification System. [Final Year Project] (Unpublished)

Mohd Noor, Nor Fakhrul (2013) Carbon Nanotube Reinforced Aluminium Matrix Produced by Friction Stir Processing. [Final Year Project] (Unpublished)

Ahmad Rassdi, Nurul Hidayah (2013) Cellulosic-Based Packaging Material from Corn Husk. [Final Year Project] (Unpublished)

Mahamed Salleh, Afdzal Zullah (2013) Computer Aided Design of a Deepwater Floater. [Final Year Project] (Unpublished)

Jahir, Mohd Rozairie (2013) Conceptual Design Support Tool for Subsea Equipment. [Final Year Project] (Unpublished)

Mustafa, Afildhatul Nashima (2013) STUDY ON THE EFFECT OF VOIDS ON RESTART PUMPING OF GELLED CRUDE OIL IN PRODUCTION PIPELINE. [Final Year Project] (Unpublished)

Mariapan, Kohila (2013) Sludge Calorific Value Mapping and Potential Energy Recovery for Malaysia. [Final Year Project] (Unpublished)

SHAMUGAM, JAYKANESH (2013) THERMAL SHRINKAGE AND GAS VOIDS FORMATION OF WAXY CRUDE OIL. [Final Year Project] (Unpublished)

Zaley, Mohammad Yusof (2013) Mechanical Properties Study of Recycled Machinable Wax. [Final Year Project] (Unpublished)

ABDUL LATIF, MUHAMMAD FADHIL (2013) Friction Stir Welding (FSW): The effect of tilting angle. [Final Year Project] (Unpublished)

Mohd Zin, Muhammad Zaki (2013) STUDY OF JATROPHA CURCAS BIODIESEL BLEND WITH FOSSIL DIESEL THERMAL CHARACTERIZATION, ENGINE PERFORMANCE AND EMISSION COMPARE TO FOSSIL DIESEL. [Final Year Project] (Unpublished)

ZAINAL, ZA’IM AZWAN (2013) PERFORMANCE STUDY OF THE SOLAR-POWERED ABSORPTIVE REFRIGERATION PROCESS. [Final Year Project] (Unpublished)

Mohamad Sobri, Abdul Nasir (2013) Microscopic Study on Size and Roundness of Some Malaysian Sand for Proppant. [Final Year Project] (Unpublished)

Mohamad Yusof, Ahmad Fadzli (2013) STRESS DISTRIBUTION MODEL IN WATER INJECTION WELL. [Final Year Project] (Unpublished)

Aziz Zaki, Ahmed Abdel (2013) Well Control in Drilling Process. [Final Year Project] (Unpublished)

Ahmed Hussien, Mohamed Yousry (2013) Simulation Study on IWAG Assisted by Low Salinity Water Injection for Light Oil Reservoirs. [Final Year Project] (Unpublished)

NISYAK SAHARUDIN, SITI KHAIRUN (2013) Enhanced Oil Recovery. [Final Year Project] (Unpublished)

Isvaran, Arunan (2013) Study on the Effect of Lime on Biofuel-based (Palm Fatty Acid Distillate) Drilling Fluid. [Final Year Project] (Unpublished)

Hamid, Mohd Ridzuan (2013) Comparative studies on the effect of surfactant used in optimizing the hydraulic fracturing technique for shale gas formation. [Final Year Project] (Unpublished)

CHE RASLI, AHMAD IKHWAN (2013) A SIMULATION STUDY ON THE EFFECT OF GEOMECHANICS ON THE PERFORMANCE OF THE RESERVOIR DURING WAG-CO2 INJECTION. [Final Year Project] (Unpublished)

Allapitchai, Mohamad Shahril Majid (2013) STUDY ON THE EFFECT OF RICE HUSK IN GEOPOLYMER COMPRESSIVE STRENGTH. [Final Year Project] (Unpublished)

Moktar, Nur Syazwani (2013) Prediction of Oil Density using Group Method of Data Handling (GMDH) Approach and the Effect of Reducing Correlating Parameters; A Comparative Study. [Final Year Project] (Unpublished)

HEW, ZHONG YING (2013) EVALUATION OF METHODS TO LOWER MMP OF CRUDE OIL IN GAS MISCIBLE DISPLACEMENT. [Final Year Project] (Unpublished)

Muhamad Shuhili, Juhairi Aris (2013) OPTIMIZATION STUDY OF FOAM ASSISTED WATER ALTERNATING GAS (FAWAG) IN PRESENCE OF ASPHALTENE IN LIGHT OIL. [Final Year Project] (Unpublished)

Ab Razak, Norsyuhada (2013) Simulating the Effect of the Coal Density on Methane Recovery for CBM Study. [Final Year Project] (Unpublished)

Zakaria, Siti Shahara (2013) Study on the Effects of Palm Oil Fuel Ash (POFA) in Geopolymer Cement Properties. [Final Year Project] (Unpublished)

Abd Rahman, Noor Shakila (2013) Phase Behavior of Alkaline Surfactant Polymer in Hard Water. [Final Year Project] (Unpublished)

Azmi, Muhammad Afdhaludden (2013) Reutilization of flare gas for energy recovery in oil and gas operations. [Final Year Project] (Unpublished)

Mohamad Ruzlan, Nur Syaffiqa (2013) The Influence of Low Salinity Waterflooding on Waxy Oil Recovery. [Final Year Project] (Unpublished)

ISKANDAR, MUHAMMAD ASYRAF (2013) EFFECT OF INHIBITORS ON ASPHALTENE PRECIPITATION. [Final Year Project] (Unpublished)

Md Talip, Elisha (2013) Geomechanical Analysis and Modelling for Optimizing Well Trajectories in the Reservoir. [Final Year Project] (Unpublished)

Sockalingam, Shathiskumar (2013) Study on the Effect of Rice Husk Ash, Fly Ash and Palm Frond Ash in Geopolymer Cement. [Final Year Project] (Unpublished)

Annuar, Hayatul Nadia (2013) SECONDARY RECOVERY FOR THE OPTIMIZATION OF COAL BED METHANE (CBM) PRODUCTION. A SIMULATION STUDY. [Final Year Project] (Unpublished)

Jamel, Delwistiel (2013) Prediction of Pressure Drop in Horizontal and Near-Horizontal Multiphase Flow using Group Method of Data Handling (GMDH) approach with the aim of reducing the curse of dimensionality; A Comparative Study. [Final Year Project] (Unpublished)

Sirajudin, Mohamed Saifullah (2013) Study on the Effect of Fly Ash in Geopolymer Cement. [Final Year Project] (Unpublished)

Magathevan, Tharmaraj (2013) Performance Comparison and Optimization of PFAD based Drilling Fluid. [Final Year Project] (Unpublished)

Mohammed Yussof, Sarah Adiba (2013) Simulation of CO2 Injection in Gas Reservoir Using ECLIPSE. [Final Year Project] (Unpublished)

Mazurenko, Nikita (2013) Investigation of Polymer stability at high temperature and high salinity. [Final Year Project] (Unpublished)

MAMSOR, MUHAMMAD ZULIQRAM (2013) GEOPOLYMER BASED OIL WELL CEMENTING SYSTEM USING MIRHA. [Final Year Project] (Unpublished)

ABDUL RAHMAN, NORHAZILAH (2013) DEVELOPING A MATHEMATICAL MODEL FOR PREDICTING THE BOTTOM-HOLE FLOWING PRESSURE OF A GAS WELL. [Final Year Project] (Unpublished)

Yusoff @ Mohd Yusoff, Mohamad Hazwan (2013) CHARACTERIZATION OF WAXY AND ASPHALTENIC CRUDE OIL USING SARA ANALYSIS. [Final Year Project] (Unpublished)

Romle, Amirul Nur Azam (2013) The Design of Improved Water Based Mud (WBM) By Using Nanosilica and Its Performance on Maintaining Shale Stability. [Final Year Project] (Unpublished)

YEN HUA, LAI (2013) EOR USING IONIC LIQUIDS. [Final Year Project] (Unpublished)

Radzlan, Raihana (2013) The Effect of Lime and Primary Emulsifier on Rheological Behaviour of Palm Fatty Acid Distillate (PFAD)-based Drilling Fluid. [Final Year Project] (Unpublished)

Zainuddin, Zaihasfikrie (2013) Separator Internal Design Optimization to Enhance the Separation Efficiency of Horizontal Separator by Using CFD. [Final Year Project] (Unpublished)

DEVASAHAYAM THANARAJU, ANDREW (2013) Experimental Measurement of Dew Points for High Carbon Dioxide Natural Gas. [Final Year Project] (Unpublished)

Baharuddin, Muhammad Haidir Nizam (2013) A Study on the Effect of Acid Injection with Surfactants on Malaysian coals for CBM Study. [Final Year Project] (Unpublished)

Ramli, Nazrin (2013) Development of Fluid Properties Correlation For Malaysian Crude. [Final Year Project] (Unpublished)

Ab Ghani, Nor Muhammad Kamar Ghaz (2013) The Effects of Gas Injection on Coalbed Methane Production. A Simulation. [Final Year Project] (Unpublished)

Abd. Karim, Nurfuzaini (2013) ANALYTICAL STUDY ON GAS LIFT OPTIMISATION AND PREDICTION OF PRODUCTION LIFE OF THE WELLS IN PLATFORM C, B-1 FIELD. [Final Year Project] (Unpublished)

Abdul Khalil, Amira Raihana (2013) Impact of Well Stimulation on Coal Porosity of Malaysian Coals for Coalbed Methane (CBM) Study. [Final Year Project] (Unpublished)

Fook Ann, Kong (2013) Impact of Coal Compressibility OnCoalbed Methane Production: A Comparison Study of Malaysian Coal to Other CBM Fields. [Final Year Project] (Unpublished)

BALAKRISHNAN, DINESH (2013) COMPUTATIONAL FLUID DYNAMICS STUDY ON T-JUNCTION SEPARATOR FOR LIQUID-GAS SEPARATION. [Final Year Project] (Unpublished)

Humza, Malik Muhammad (2013) Cementing Design For the HPHT Well By Using Land Mark Software. [Final Year Project] (Unpublished)

Abdul Wahab, Norsharmila (2013) Study on the Effect of Micro-Incinerated Rice Husk Ash (MIRHA) and Fly Ash (FA) in Geopolymer Cement. [Final Year Project] (Unpublished)

Shian Ee, Ma (2013) Wormlike Micelle as Drag Reducing Agent in Flow Assurance. [Final Year Project] (Unpublished)

Mohd Mustafa, Muhammad Izzatullah (2013) ANALYSIS AND INTERPRETATION OF PRESSURE TRANSIENT TEST DATA BY RECENT ROBUST DECONVOLUTION METHODS. [Final Year Project] (Unpublished)

LOW, JUN LEON (2013) LOW SALINITY WATER FLOODING SIMULATION STUDY. [Final Year Project] (Unpublished)

Ibrahim, Ahmad Adli (2013) Lubricity of Jatropha Oil Based Mud. [Final Year Project] (Unpublished)

Ahmad Naziri, Azizul Fikri (2013) Malaysian Sand for Proppant. [Final Year Project] (Unpublished)

KHAIRUDDIN, AHMAD FURQAN (2013) THE EFFECT OF SILICA DISSOLUTION ON PERMEABILITY IN WATER AND ALKALINE INJECTION. [Final Year Project] (Unpublished)

Ismail, Mohammad Sazwan (2013) To Study the Effect of Coal Rank and Porosity on the Optimization of ECBM Recovery. [Final Year Project] (Unpublished)

Chai Shing, Hing (2013) Impact of Nano-Bentonite in Water-Based Mud (WBM) on Reservoir Formation Damage. [Final Year Project] (Unpublished)

ABDULLAH, MOHD FAHMIE (2013) MITIGATING SILICATE SCALING USING GREEN INHIBITOR. [Final Year Project] (Unpublished)

Manahar, Ilangkabilan (2013) Cementing of geothermal wells. [Final Year Project] (Unpublished)

Sohaili, Muhammad Nazrin (2013) The Enhancement of Non-Destructive Testing and Evaluation Through the Use of Active Infrared Thermography to Identify Internal Pipe Wall Thinning and Corrosion Under Paint”. [Final Year Project] (Unpublished)

Zainuddin, Siti Nabilah (2013) Hydrothermal Alteration of Clay Minerals in EOR Injection Well. [Final Year Project] (Unpublished)

Jaffir, Mohammad Zafarudin (2013) Drilling Torque and Drag Application. [Final Year Project] (Unpublished)

CHANDRAN, KAYATHIRI (2013) Multiwall Carbon Nanotubes (MWNT) Fluid in EOR Using Core Flooding Method Under The Presence of Electromagnetic Waves. [Final Year Project] (Unpublished)

HAN YONG, JOACHIM WAN (2013) A SIMULATION STUDY OF MISCIBLE AND IMMISCIBLE CO2 WAG INJECTION. [Final Year Project] (Unpublished)

THAMILYANAN, THIVYASHINI (2013) Phase Behavior & Core Flooding of Low Acid Number Crude Oil for Application in Alkaline EOR. [Final Year Project] (Unpublished)

MAHADZIR, NUR ADILLA (2013) DEVELOPMENT OF MATHEMATICAL MODEL FOR HYDRAULIC FRACTURING DESIGN. [Final Year Project] (Unpublished)

Ishak, Muhammad Izham Kamil (2013) Coefficient of Friction (COF) and Wear Ranking of Water-based Muds (WBM) and Oil-based Muds (OBM). [Final Year Project] (Unpublished)

OSMAN, ABDUL AFIF (2013) Polymeric Surfactant for EOR: Polymeric Sodium Methyl Ester Sulfonate (PMES) Performance in High Brine Salinity. [Final Year Project] (Unpublished)

Yan Ching, Lye (2013) TECHNICAL AND ECONOMIC ANALYSIS OF HYDRAULIC PUMPS IN DELIQUIFYING GAS WELLS. [Final Year Project] (Unpublished)

Kan, Wai Choong (2013) Hydraulic Fracturing Design and Optimization for Shale Oil Reservoir. [Final Year Project] (Unpublished)

Lim, Pei Wen (2013) CHARACTERIZATION OF CRITICAL GAS FLOW RATE TO PREVENT LIQUID LOADING. [Final Year Project] (Unpublished)

Amat Jupri, Muhammad Abdul Kholiq (2013) COMPARISON OF HEAVY OIL VISCOSITY CORRELATIONS. [Final Year Project] (Unpublished)

SANTHASWDI, SIVANESAN (2013) GAS PIPELINE HYDRATE MITIGATION USING IONIC LIQUID. [Final Year Project] (Unpublished)

Raja Bongsu, Raja Hamizah (2013) Investigating the effect of skin on the optimization of Coal Bed Methane (CBM) production. [Final Year Project] (Unpublished)

Selvakumaran, Vinod Kumar (2013) Rheology of Cement Mixed with Hollow Microspheres. [Final Year Project] (Unpublished)

NARAYANAN, PUVENESHWARI (2013) Simulation Study On WAG-CO2 Injection Optimization For Less Asphaltene Precipitation In Light Oil. [Final Year Project] (Unpublished)

MOHD SHABARUDIN, EZZA SHAZANA (2013) POLYPROPYLENE GLYCOLS SURFACTANT AS ADDITIVES DRILLING FLUID FOR INJECTION WELL IN LPLT AND HPHT ENVIRONMENTS. [Final Year Project] (Unpublished)

Chuin Cherng, Tang (2013) Analysis of Wireline Interval Pressure Transient Tests From Single and Layered Reservoir Systems. [Final Year Project] (Unpublished)

Saidin, Mohd Adnan (2013) Effect Of Nanoparticle Crystallite Sizes In A Nanofluid On The Interfacial Tension Of Oil For Oil Recovery In EOR. [Final Year Project] (Unpublished)

Ahmed Alamin, Musaab Mohamed (2013) Estimating Pressure Drop in Vertical Wells Using Group Method of Data Handling (GMDH) Approach; a Comparative Study. [Final Year Project] (Unpublished)

AHMED NOURI, EITHAR ISAMELDIN (2013) ANALYZING THE EFFECTS OF CELL PHONE ON THE BRAIN USING EEG. [Final Year Project] (Unpublished)

ABBASI, ISRA (2013) DEVELOPMENT OF UNIVERSAL LED DRIVER CIRCUIT FOR LOW POWER LED APPLICATION. [Final Year Project] (Unpublished)

Mawardi, Muhammad Hizbullah (2013) Enhancement of Kinetic Hydrate Inhibitor Polyvinylpyrrolidone (PVP) with Addition of Chitosan. [Final Year Project] (Unpublished)

ROMLY, MATH (2013) DESIGN OF FIXED OFFSHORE PLATFORM TO MARINE GROWTH THICKNESS IN MALAYSIAN WATER. [Final Year Project]

Odu Paul , Duku Erikole (2013) BOND STRENGTH AND MODULUS OF ELASTICITY OF ENGINEERED CEMENTITIOUS COMPOSITES. [Final Year Project]

Mat Yamin, Arief Fikhrie (2013) Download simultaneously using multiple Internet Connections. [Final Year Project]

HASSAN, CHIMA ISMAEL (2013) Telecomm Subscriber Management System(TSMS). [Final Year Project]

NGU, KELVIN TECK YEUN (2013) ElecTrack - Mobile Electricity Usage Tracking and Visualizing. [Final Year Project]

Norazman, Nor Sa’datul Aqma (2013) Scammed Posting Detector: A Case Study of Pet Scammed Posting. [Final Year Project]

YAHYA, JUNAIDA (2013) BAHASA ISYARAT MALAYSIA (BIM) MOBILE APLLICATION. [Final Year Project]

Md Shariffuldin, Nor Syafiza (2013) Development of Courseware for Slow Learner Children with Reading Difficulties (“my LINUS”). [Final Year Project]

Abd Halim, Nur Izyan Izzati (2013) Matching Contextual Ads and Web Page Contents through Computational Advertising: Getting the Best Match. [Final Year Project]

Mohd. Zakaria, Mohammed Nazrin (2013) Mobile Application for Personal Journal/Diary. [Final Year Project]

Jamaluddin, Nur Atikah (2013) A Selection of Higher Education Institutions by Using a Web-Based System University-Information (U-Info). [Final Year Project]

Saini, NurSyakilatul Aina (2013) Location Detection of Dementia Using GPS Coordinate Finder. [Final Year Project]

Nguyen , Minh Tuan (2013) Graphical representation of the navigation status in a virtual tour. [Final Year Project]

Md Salleh, Mohammad Sharul Mizwan (2013) Website Defacement Detector. [Final Year Project]

YEOH , CHIE YEE (2013) Location Detection in Mobile Application. [Final Year Project]

Mazlan, Mohamad Haiqal (2013) DESIGN AND COMPARITIVE THERMAL ANALYSIS OF CONSTRUCTAL COOLING CHANNEL. [Final Year Project] (Unpublished)

MOHAMAD ALI, MOHAMAD ROZAIDI (2013) ESTABLISHING CORRELATION BETWEEN LEAF SPRING’s SPECIFICATIONS AND CAMBER DROP. [Final Year Project] (Unpublished)

Mazlan, Mohamad Haiqal (2013) DESIGN AND COMPARITIVE THERMAL ANALYSIS OF CONSTRUCTAL COOLING CHANNEL. [Final Year Project] (Unpublished)

ABDUL HANAN, MOHD SYAHID (2013) CENTRIFUGAL COMPRESSOR VIBRATION ANALYSIS. [Final Year Project] (Submitted)

Mohd Noor, Nursyazana (2013) Investigate the Dispersion and Suspension of Zinc and Silver Nano additives in Nano composites. [Final Year Project] (Unpublished)

Hamdan, Muhamad Faris (2013) CFD Modelling of Supersonic Wet Gas Separator. [Final Year Project] (Unpublished)

Aziz, Muhammad Rafiuddin (2013) Flowrate Measurement Based on ECD Behavior in Cementing HPHT Well. [Final Year Project] (Unpublished)

SELVANATHAN, DEVASHNE R. (2013) Development of a Mobile Health Awareness Application for Back Pain Patients’ Using Persuasive Technology (MyBackRelief). [Final Year Project]

Mat Yusoh, Anis Farhana (2013) Fun Learning Tools to Enhance Students Interest in Science via e-Book. [Final Year Project]

Firuz, Fatin Nadzirah (2013) ISLAMIC LEARNING APPLICATION FOR KINDERGARTEN. [Final Year Project]

Ahmad Bokhari, Khairul Hafizin (2013) MEAL ORDERING APPLICATION FOR FAST FOOD RESTAURANT. [Final Year Project]

Hamid, Munawar (2013) Pore Pressure Prediction in Shale Gas Field. [Final Year Project] (Unpublished)

Mohd Anwar, Ahmad Fikry (2013) Production of green fuels using novel catalyst via Fischer-Tropsch synthesis: catalyst preparation and characterisation of iron and cobalt on calcium support. [Final Year Project] (Unpublished)

., Syed Osama Bukhari (2013) Gas Hydrate Formation Kinetics Measurement of Mixed Carbon dioxide and Methane. [Final Year Project] (Unpublished)

Wan Kamarudin, Wan Nurul Izzah (2013) Boilover Fire: A Study in Laboratory Scale. [Final Year Project] (Unpublished)

Mohd Fuad, Nur Faiqa (2013) Simulation of Chemical Flooding for Enhanced Oil Recovery Based on Experimental Data. [Final Year Project] (Unpublished)

., NGUYEN THI HOAI VY (2013) Synthesis and characterization of polyimide membrane for carbon dioxide removal prepared by dry-wet phase inversion method. [Final Year Project] (Unpublished)

Zahari, Mohd Syatmi Syazwan (2013) Intelligent Football Management Information System (rFMrs). [Final Year Project] (Unpublished)

MUHAMMED JUSOFFE PEREIRA, MUNTAQIM SHAH PEREIRA (2013) SIMULATION OF OIL – WATER INTERACTION AT DOWNHOLE. [Final Year Project] (Unpublished)

MANSOR, MUHAMMAD SUFI (2013) DEVELOPMENT OF ELECTRICAL CAPACITANCE TOMOGRAPHY SYSTEM DATA ACQUISITION SYSTEM FOR NON-CONDUCTIVE MULTIPHASE PROCESSES. [Final Year Project] (Unpublished)

DO , THAI HA (2013) Investigation on Unhealthy Control Valve Characteristic using Acoustic Emission Technique. [Final Year Project] (Unpublished)

HASHIM, HASNUL ZICKRY (2013) NOVEL DESIGN OF ELECTRICAL MACHINE FOR CEILING FAN. [Final Year Project] (Unpublished)

ABD RAHMAN, ZAINUL ARIFFIN (2013) BATTERY PERFORMANCE MONITORING IN PHOTOVOLTAIC ELECTRICITY GENERATION SYSTEM (PVEGS). [Final Year Project] (Unpublished)

., ELIDIO PEDRO NHABETSE (2013) DEVELOPEMNT OF ULTRASONIC LIQUID LEVEL MEASUREMENT. [Final Year Project] (Unpublished)

MOHAMAD JAPRI, MOHAMAD ASHRAF (2013) INTERFACE REGION LEVEL MEASUREMENT. [Final Year Project] (Unpublished)

MOHAMAD ROSELEE, MOHAMAD FIRDAUS (2013) AUTOMATIC METER READING USING ZIGBEE. [Final Year Project] (Unpublished)

MOHD YASEEN, YASIR ASHIQ ALI (2013) SMART ENERGY SAVING CLASSROOM AND MONITORING SYSTEM USING PROGRAMMABLE LOGIC CONTROLLER. [Final Year Project] (Unpublished)

Raal Mandour, Raal (2013) Optimization of Maximum Power Point Tracking (MPPT) of Photovoltaic System using Artificial Intelligence (AI) Algorithms. [Final Year Project] (Unpublished)

Ahmad, Khairul Tasniim (2013) Jatropha Curcas for Phytoremediation of Refinery Sludge. [Final Year Project] (Unpublished)

SIVAGNANAM, PONMANI (2013) THE SEPARATION OF CARBON DIOXIDE – METHANE – PROPANE BY USING HOLLOW FIBER MEMBRANE: EFFECT OF FEED PRESSURE AND CO2 COMPOSITION. [Final Year Project] (Unpublished)

DAHNARAJ , LACHEMYKANDEN (2013) DEVELOPMENT OF GREEN COMPOSITE BINDER MATERIAL FROM INDUSTRIAL WASTE STABILISATION. [Final Year Project] (Unpublished)

RAZALI, RAFIQ HAKIM (2013) EFFECT OF FEED TEMPERATURE AND COMPOSITION OF PROPANE ON THE SEPARATION OF CARBON DIOXIDE – METHANE – PROPANE BY USING HOLLOW FIBER MEMBRANE. [Final Year Project] (Unpublished)

Mohd Safie, Nursyahirah (2013) SOLID SUPPORT ON THIOSALICYLATE BASED IONIC LIQUID FOR METAL EXTRACTION. [Final Year Project] (Unpublished)

Yee , Cia Yin (2013) Integrated Mg/TiO2 – phosphate based ionic liquid system for deep desulfurization of diesel oil. [Final Year Project] (Unpublished)

.SANTHIRASEGARAN, JEIHARISH S.V (2013) IMPROVEMENT OF SOLAR PHOTOVOLTAIC MODULE EFFICIENCIES THROUGH WATER COOLING AND DEBRIS REMOVAL. [Final Year Project] (Unpublished)

Wei Wen, Jeremy Lo (2013) PROPOSAL FOR EFFICIENT METHODS TO PRODUCE CURVED PISTON FOR MASS PRODUCTION. [Final Year Project] (Unpublished)

Hata Suhaimi, Nurafiqah (2013) S-Cane Pack. [Final Year Project] (Unpublished)

HUSSAIN, MUHAMMAD SYAMIM (2013) STUDY OF CASTOR OIL AS OIL BASED FLUID IN DRILLING OPERATION. [Final Year Project] (Unpublished)

ZAINAL ABIDIN, AHMAD SHAHIR SAFFUAN (2013) REMOTE PROGRAMMING OF A TURTLE ROBOT. [Final Year Project] (Unpublished)

HUSAYNI, SADIQ (2013) DEVELOPMENT OF AN AUTOMATED PACKAGING CONTROL SYSTEM. [Final Year Project] (Unpublished)

Baba, Issa Adoum (2013) Online Examination System for Introduction to Management course. [Final Year Project]

Amran, Nabil Assila (2013) Developing Personalized Mobile Game-Based Learning Application to Assist Standard 6 Students in Malaysia in Science Subject. [Final Year Project]

SOUMAINE, SAKHAIROUN ADOUM (2013) LEARNING FRENCH LANGUAGE ANDROID MOBILE APPLICATION. [Final Year Project]

HTET, WAI YAN (2013) BOOK REPLACEMENT USING ANDROID SYSTEM. [Final Year Project]

Ismail Amer, Ahmed Mamdouh (2013) Emergency Button Application - Android Systems. [Final Year Project]

Chema, Aris (2013) ASEAN 4 KIDS: AN INTERACTIVE APPLICATION FOR LEARNING ASEAN CULTURE. [Final Year Project]

M. Akhir, Ainunul Khalilah (2013) Mutabaah Tracking System. [Final Year Project]

Mokhtahir, Mahmud Mazuin (2013) Re-Presenting Text in a Website for Visually Impaired Users using Braille Line. [Final Year Project]

Mohd Nissfu, Mohamad Ashraf (2013) Netlab: Mobile Learning Application for Data Communication and Networking. [Final Year Project]

Omar Bakhi, Mohd Firdaus (2013) Time Treadmill. [Final Year Project]

Azhar, Muhamad Hafiz Mughni (2013) AirTransit Trip Planner Application. [Final Year Project]

Idham, Muhammad Afif (2013) LINUX VIRTUAL SERVER CLUSTERING: PRISM. [Final Year Project]

Mohd Roba'ei, Muhammad Darus Fazarin (2013) Cloud Computing Approach for UTP Educational Hardware and Software Resource Sharing. [Final Year Project]

Shaidan, Muhammad Nur Faiz (2013) HUMAN RESOURCES KNOWLEDGE SHARING PORTAL FOR TRAINING & PEOPLE CAPABILITY UNIT. [Final Year Project]

Jamal Abd Nasir, Nor Nadia (2013) D-Lexis: Alphabet Mobile Learning Application for dyslexia for dyslexia Based on Slingerland Methods of Learning. [Final Year Project]

Saifullah, Roisah Fadhilah (2013) Mobile Game Based Learning on Online Banking Fraud Security among Young Adults (BFG). [Final Year Project]

Ismail, Siti Nuwairani (2013) Interactive Jawi Learning Application on Mobile Device for Primary Students. [Final Year Project]

Isahak, Siti Zulaikha (2013) An Experimental Study on Relationship between Performance and Energy Consumption of Serial and Parallel Text Searching Algorithm. [Final Year Project]

WONG , SING YUNG (2013) Visualization of UTP‘s Energy Consumption And Its Carbon Footprint (ENVISION). [Final Year Project]

Hamzah, Yusairah (2013) i ErgoApps : A mobile application that create awareness and reminder on having ergonomic practices to avoid Work Related Musculoskeletal Disorders (WMSD). [Final Year Project]

Wan Mazlan, Wan Muhammad Faris (2013) Implementation of QR Code in UTP Educational System. [Final Year Project]

Arcay Pabillaran, Ruby Isabel (2013) Language Learning Guide Mobile Application. [Final Year Project]

Hamzan, Ahmad Faidz (2013) DESIGN AND DEVELOPMENT OF A LOW-COST HAPTIC DEVICE. [Final Year Project]

Mohamed Arifin, Muhamad Rizuan (2013) CONTEXTUAL ADVERTISING: MATCHING CONTENTS WITH POTENTIAL VIEWERS. [Final Year Project]

Mokhtar, Mohamad Aleem (2013) PERFORMANCE BASED PRICING MODELS IN ONLINE ADVERTISING: CLICK PER MILLE (CPM) AND COST PER CLICK (CPC). [Final Year Project]

Johanor, Aiman (2013) Li-Booster: INTERACTIVE LITERACY COURSEWARE USING ANIMATION FOR LINUS PROGRAMME. [Final Year Project]

Md Zaki, Nurrul Zahidah Amirah (2013) Rapid Personality Test. [Final Year Project]

Mohamad, Nadhrah (2013) Number Skills Conceptual Framework for Down Syndrome Children. [Final Year Project]

Tran , Quang Trung (2013) Online Programming Judge System (UOJ). [Final Year Project]

MOHD ZULKIFLI, MUHAMAD SYAHMI (2013) EFFECT OF SALINITY OF CONCENTRATION OF POLYMER SOLUTION ON VISCOSITY. [Final Year Project] (Submitted)

Raja Hassan, Raja Mohammad Arif (2013) Paraffin Wax: The Effect of Particles on Crystallisation Kinetics. [Final Year Project] (Unpublished)