Items where Department / MOR is "Chemical" and Year is 2023

Thesis

Abd Mutalib, Nor Fariza (2023) Direct Conversion of Hydrogen Sulfide to Elemental Sulfur at Ambient Condition Using Transition Metal Incorporated Ionic Liquid. Masters thesis, Universiti Teknologi PETRONAS.

Abu Talip, Ruwaida Asyikin (2023) Investigation of Pyrazolium Based Ionic Liquids as Electrolyte for Dye Sensitized Solar Cell (DSSC). Doctoral thesis, Universiti Teknologi PETRONAS.

Asif, Khadija (2023) Atomistic Simulation Study Towards Molecular Design Of Amine Funtionalized Silica In Polysulfone Based Mixed Matrix Membrane For CO2/CH4 Separation. Masters thesis, Universiti Teknologi PETRONAS.

HALIL, NORSUZIEANAH (2023) The Enhancement of Control Banding for Nanomaterials Risk Assessment in Paint and Coating Industry. Masters thesis, UNSPECIFIED.

HEZAM SAEED, ANWAR AMEEN (2023) DEVELOPMENT OF KENAF-BASED MAGNETIC BIOCHAR ADSORBENT FOR CADMIUM IONS REMOVAL. Doctoral thesis, UNSPECIFIED.

INN LEON, LU (2023) DEVELOPMENT OF MICROSEPARATOR WITH DAUGHTER CHANNELS FOR LIQUID-LIQUID TWO PHASE SEPARATION USING COMPUTATIONAL FLUID DYNAMICS. Masters thesis, UNSPECIFIED.

KOLAWOLE, AFOLABI HARUNA (2023) DEVELOPMENT OF POLYETHYLENE/POLYPROPYLENE FIBROUS RADIATION GRAFTED ADSORBENT CONTAINING GLYCIDOL LIGANDS FOR BORON REMOVAL. Doctoral thesis, UNSPECIFIED.

MAT TI @ MOKTI, NAWWARAH (2023) KINETIC STUDY OF CO2 ADSORPTION ON IMPREGNATED PYRIDINIUM IONIC LIQUID-ACTIVATED RUBBER SEED SHELL CARBON. Masters thesis, Universiti Teknologi PETRONAS.

Nallakukkala, Sirisha (2023) Performance Evaluation and Kinetic Study of CO2-Rich Natural Gas Hydrate Formation for Produced Water Treatment. Doctoral thesis, Universiti Teknologi PETRONAS.

P.R.Ramany, Naveen Sunder (2023) Study on The Performance of PDMS Coated Cellulose Triacetate Hollow Fiber Membrane Incorporated with NH2-MIL-125(Ti) in CO2 and CH4 Gas Permeation. Masters thesis, Universiti Teknologi PETRONAS.

ROSLI, NORHAZIRAH (2023) HYDROLYZED CHITOSAN/POLYVINYL ALCOHOL NANOFIBERS FUNCTIONALIZED BY IONIC LIQUID FOR HEAVY METAL IONS REMOVAL. Masters thesis, UNSPECIFIED.

Tabaaza, Grace Amabel (2023) Application of Machine Learning To Predict The Toxicity of Ionic Liquids. Masters thesis, Universiti Teknologi PETRONAS.

Ul Haq, Ihtisham (2023) Effect of Ammonium-Based Ionic Liquids on Thermodynamic Gas Hydrate Inhibitors. Masters thesis, Universiti Teknologi PETRONAS.

WAQAS, SHARJEEL (2023) DEVELOPMENT OF MEMBRANE ROTATING BIOLOGICAL CONTACTOR FOR WASTEWATER TREATMENT. Doctoral thesis, UNSPECIFIED.

YAP, YUN KEE (2023) ALTERNATING MAGNETIC FIELD ASSISTED DISPERSION OF α-FE2O3/TIO2 PARTICLES IN MIXED MATRIX MEMBRANE FOR CO2 SEPARATION. Masters thesis, Universiti Teknologi PETRONAS.

Final Year Project

ABD AZIZ, MUHAMMAD AKMAL ZIKRI (2023) EXPERIMENTAL AND MODELING PROCESS OF LEAD ADSORPTION ON SILICA NANOCAPSULES ADSORBENT. [Final Year Project] (Submitted)

ABD KADIR, NUR HASNI ATIRAH (2023) RECOVERY OF NICKEL AND COBALT FROM NITRATE SOLUTIONS USING PROGRESSIVE FREEZING. [Final Year Project] (Submitted)

ABDUL HADI, MUHAMMAD AMIRUL ADIB (2023) PERIODIC COMPUTATIONAL FLUID DYNAMICS (CFD) SIMULATION OF MEMBRANE CONTACTOR USED FOR ACID GAS ABSORPTION SYSTEM: MOMENTUM AND MASS TRANSFER ANALYSIS. [Final Year Project] (Submitted)

ABDUL KHALIL, MUHAMMAD IMAN (2023) QUANTITATIVE RISK ASSESSMENT FOR WASTE TO ENERGY (WTE) FACILITY. [Final Year Project] (Submitted)

ABDUL LATIF, ALI (2023) THE INCORPORATION OF GLYCEROL AS COMPATIBILIZER IN PHA-CELLULOSE FIBERS MATRIX AS BIOPLASTIC. [Final Year Project] (Submitted)

ABDULLAH, NURUL IZZATY (2023) DEVELOPMENT OF ARTIFICIAL INTELLIGENCE (AI) FOR PREDICTING PROCESS UNIT ANOMALY CONDITION USING DECISION TREE CLASSIFIER MACHINE LEARNING MODEL. [Final Year Project] (Submitted)

ABDUR RAHIM, MUHAMMAD ADHAM (2023) DISSOLUTION OF PEEK USING IONIC LIQUIDS. [Final Year Project] (Submitted)

ABU NAZARI, INDAH BALQIS (2023) BIODIESEL PURIFICATION USING ETHYL ACETATE THROUGH SOLVENT-AIDED CRYSTALLIZATION. [Final Year Project] (Submitted)

AHMAD BASRI, SITI NURFATIHAH (2023) OIL SORPTION PROPERTIES OF PRISTINE AND MODIFIED KAPOK FIBER. [Final Year Project] (Submitted)

AHMAD SHUHAIRIL, AHMAD NABIL (2023) ADDITIVE WINTERIZATION OF BIODIESEL FOR COLD FLOW PROPERTIES IMPROVEMENT. [Final Year Project] (Submitted)

AMIR SANI, AMIZATUL AZWANI (2023) DYNAMIC AND CONTROL OF AIR-SEPARATION UNIT. [Final Year Project] (Submitted)

AMIR SHARIFUDIN, MUHAMMAD FARIS ZAFRAN (2023) DEVELOPMENT AND CHARACTERIZATION OF ZEOLITE NaY ADSORBENT FOR DIRECT AIR CAPTURE. [Final Year Project] (Submitted)

ANAK SAMBANG, LEONARDO (2023) ENHANCED ADSORPTION OF METHYLENE BLUE USING OPTIMIZED MERANTI WOOD ACTIVATED CARBON: A SUSTAINABLE APPROACH FOR WASTEWATER TREATMENT. [Final Year Project] (Submitted)

ANAK STEVEN, RICHARD (2023) CARBONIZATION OF POLY(S-MA) FOR EFFECTIVE REMOVAL OF CHROMIUM FROM WASTEWATER. [Final Year Project] (Submitted)

ANPARASAN, AISSWARYA (2023) ONE-POT MICROWAVE-ASSISTED CONVERSION OF BAMBOO HYDROLYSATE INTO 2-5 DIMETHYLFURAN. [Final Year Project] (Submitted)

AU DANIEL, AMANDA DEIDRE (2023) GREEN SYNTHESIS OF REDUCED GRAPHENE OXIDE WITH DEEP EUTECTIC SOLVENT FOR SYNERGISTIC ENCAPSULATION OF CURCUMIN AND TOCOTRIENOL. [Final Year Project] (Submitted)

AZAHARI, MOHAMAD AZAM (2023) MODIFICATION OF GLYCEROL-TREATED POLYHYDROXYALKANOATES WITH CELLULOSE FROM BANANA PEEL FIBRES. [Final Year Project] (Submitted)

AZLEYZAM, MUHAMMAD AMEER MUQRIE (2023) COOLING STRATEGY OF 18650 BATTERY USING MICROFLUIDIC CHANNEL AS HEAT SINK. [Final Year Project] (Submitted)

AZLIN SHAH, MUHAMMAD HAKIM (2023) EXTRACTION OF REE FROM AQUEOUS SOLUTION USING IONIC LIQUIDS. [Final Year Project] (Submitted)

AZMAN, NUR NATASYA AMIERA (2023) SYNTHESIS & APPLICATION OF Fe3O4 / TiO2 NANOPARTICLES FOR BIOUAGMENTATION PROCESS IN OILY SLUDGE WATER. [Final Year Project] (Submitted)

Abdullah, Muhamad Norhafiszi (2023) Extraction and Recovery of Protein from Microalgae using Deep Eutectic Solvent assisted by Ultrasound. [Final Year Project] (Submitted)

BADRUL HISHAM, NUR ARIANA SOFEA (2023) THE POTENTIAL OF USING PALM OIL MILL EFFLUENT (POME) TO CULTIVATE MICROALGAE FOR LIPID PRODUCTION. [Final Year Project] (Submitted)

BALACHANDRAN, BAVAANEAY (2023) H2 PRODUCTION VIA CATALYTIC DECOMPOSITION OF CH4 OVER SPHERICAL NI/FE-GEOPOLYMER CATALYST USING CH4/CO2 MIXTURE. [Final Year Project] (Submitted)

BOLHI, AHMAD IRHAM (2023) ZIF-90 FOR CO₂ CARBON CAPTURE BY USING MOLECULAR SIMULATION APPROACH. [Final Year Project] (Submitted)

CHAI, JOEVY (2023) SELECTIVE LEACHING OF LITHIUM FROM SPENT LITHIUM-ION BATTERIES USING WATER AS GREEN LEACHING AGENT. [Final Year Project] (Submitted)

CHAN, ZI JING LILIAN (2023) DEVELOPMENT OF POLYMER IONIC LIQUID AS AN ANION EXCHANGE MEMBRANE. [Final Year Project] (Submitted)

CHEAH, MEI YUN (2023) IONIC LIQUID ASSISTED MODIFIED KAPOK (CERIBA PENANDRA L. GAERTN.) FIBERS FOR OILY WASTEWATER TREATMENT. [Final Year Project] (Submitted)

CHEAH, ZHEN HAO (2023) EXTRACTION OF BIOACTIVE MOLECULES FROM HYDRO DISTILLATION TREATED AGARWOOD WOOD CHIPS WITH MACERATION AND ULTRASOUND-ASSISTED EXTRACTION. [Final Year Project] (Submitted)

CHEW, BEN KIAT (2023) THE EFFECT OF PRE-TREATMENT AND SELECTION OF SOLVENT FOR EFFICIENT EXTRACTION OF MICROALGAE LIPID. [Final Year Project] (Submitted)

Chong, Pei Ning (2023) Determination Of Enablers and Disablers Of Environment-Food-Energy- Water (EFEW) Nexus In Biomass Value Chain. [Final Year Project] (Submitted)

EDHAN, NUR HASANAH (2023) DEVELOPMENT OF CRUDE DISTILLATION UNIT SIMULATION MODEL FOR UNIT MONITORING AND OPTIMIZATION. [Final Year Project] (Submitted)

HAIRIZAN, HAIQAL AFIF (2023) OPTIMIZING A COLD-STATE MOVING BED REACTOR PERFORMANCE FOR COAL PYROLYSIS: AN ANALYSIS OF WEDGE’S HALF-ANGLES AND FLOW CHARACTERISTICS USING PRINCIPAL COMPONENT ANALYSIS. [Final Year Project] (Submitted)

HAIRUDIN, IIMAN DZULHUSSNI (2023) ADHESION IMPROVEMENT OF ANTIBIOFOULING COATING BY INCORPORATING POLYMER HYDROGEL WITH GRAPHENE OXIDE. [Final Year Project] (Submitted)

HAJI AHMAD MAHYUDDIN, SITI SYAHIRAH HAZIQAH (2023) OPTIMISATION OF BIOETHANOL PRODUCTION FROM SAGO CELLULOSE. [Final Year Project] (Submitted)

HARUN, JAD HARIZZ (2023) THE EFFECT OF METAL RATIO ON THE PHYSICOCHEMICAL AND MORPHOLOGICAL PROPERTIES OF Ni-CaO/MCF CATALYST AND ITS EFFECT IN ESTERIFICATION REACTION OF GLYCEROL AND ACETIC ACID. [Final Year Project] (Submitted)

HO, YIN LIANG (2023) PROCESS SIMULATION OF PRESSURE SWING ADSORPTION (PSA) PROCESS IN AIR SEPARATION. [Final Year Project] (Submitted)

Harith, Kamilah (2023) Photoelectrochemical (PEC) System Based on Zn-Ni Deposition on TiO2 Photoanode for Water Splitting Process. [Final Year Project] (Submitted)

IBRAHIM, MUHD FARIDZ HISYAM (2023) PHYSICAL, MECHANICAL AND THERMAL CHARACTERISTICS OF PHA-CELLULOSE FROM BIOMASS FIBERS COMPOSITE FILMS. [Final Year Project] (Submitted)

J Almubarak, Sadiq Abdulkarim (2023) Development of a Predictive Safety Assessment Model for Emollients Used in Beauty and Hygiene Products Using Bayesian Network. [Final Year Project] (Submitted)

JUNAIDY, SARAH SYAZWANY (2023) OPTIMIZATION OF BIODIESEL PURIFICATION THROUGH SOLVENT-AIDED CRYSTALLIZATION USING 2-METHYLTETRAHYDROFURAN AS A GREEN SOLVENT. [Final Year Project] (Submitted)

KAMAROL ZAMAN, AINUR FARISSA (2023) OPTIMIZATION OF LIGNIN EXTRACTION FROM COCONUT PITH BY ALKALINE TREATMENT. [Final Year Project] (Submitted)

KHALEED, SITI KHALEELAH (2023) REMOVAL OF DYE FROM WATER USING MAGNETIC BIOCHAR ADSORBENTS. [Final Year Project] (Submitted)

KOAY, WERN CHENG (2023) SYNTHESIS AND CHARACTERIZATION OF UIO-66 METAL-ORGANIC FRAMEWORK LOADED WITH BIS (TRIFLUOROMETHANESULFONYL) IMIDE IONIC LIQUID. [Final Year Project] (Submitted)

KOO, WAI YEE (2023) STABILITY AND AGEING EFFECTS OF Pt/C CATALYST INK FOR POLYMER ELECTROLYTE MEMBRANE FUEL CELL. [Final Year Project] (Submitted)

LEE, BOBBY KWONG YII (2023) ELUCIDATION OF IONIC LIQUID FORMULATION IN ENHANCING SEPARATION PERFORMANCE OF SILICA/POLYIMIDE MIXED MATRIX MEMBRANE FOR CO2 REMOVAL FROM CH4. [Final Year Project] (Submitted)

LEE, ROGER JUN SHEN (2023) MULTIPHASE FLOW REGIME CHARACTERISTICS OF AIR AND WATER IN MICROCHANNEL. [Final Year Project] (Submitted)

LIAU, GLADYS PIN HUI (2023) CATALYTIC PERFORMANCE OF Co/AL2O3 IN THE VALORIZATION OF PETROLEUM SLUDGE TO VALUE ADDED PRODUCTS. [Final Year Project] (Submitted)

LIM, SHEI RONG (2023) ATOMISTIC INVESTIGATION OF POLYSULFONE BASED IONIC LIQUIDS (ILS) MIXED MATRIX MEMBRANES USING ILS MODIFIED GRAPHENE OXIDE (GO) FILLER FOR ENHANCED CO2/CH4 SEPARATION. [Final Year Project] (Submitted)

LIONG, KUI ZAO (2023) PREDICTION OF IONIC LIQUID TOXICITY USING SUPERVISED MACHINE LEARNING. [Final Year Project] (Submitted)

LOO, YONG JIE (2023) TAILORING PVDF-HFP SILICA SUPEROMNIPHOBIC FLATSHEET MEMBRANE FOR CO2 CAPTURE IN MEMBRANE GAS ABSORPTION SYSTEM. [Final Year Project] (Submitted)

LOOI, LEE WEN (2023) TECHNO-ECONOMIC ANALYSIS OF ANAEROBIC DIGESTION OF CHICKEN MANURE FOR TREATMENT AND VALUE ADDITIONS IN MANJUNG REGION. [Final Year Project] (Submitted)

MAMAT, MUHAMMAD ISMAIL (2023) SYNTHESIS AND CHARACTERIZATION OF SUSTAINABLE POLYMER FOR CO2 CAPTURE. [Final Year Project] (Submitted)

MARDZI, NIK NUR AISYA BALQIS (2023) STUDY ON BORON REMOVAL FROM PRODUCED WATER USING PILOT SCALE OF CONSTRUCTION WETLAND. [Final Year Project] (Submitted)

MARIMAN, AMIRA MARSYA (2023) MATHEMATICAL MODELLING OF MULTI-COMPONENT GAS STREAM FOR POTENTIAL APPLICATION IN MEMBRANE BASED SEPARATION. [Final Year Project] (Submitted)

MAURICE, MAXIMUS (2023) INFLUENCE OF AMINO ACID ON CO2 HYDRATE FORMATION IN TREATING SALINE WATER. [Final Year Project] (Submitted)

MD TOP, MUHAMMAD HAZWAN ASYRANI (2023) EFFECTS OF AMINE AND FLY ASH CONTENTS OF POLY (ACRYLIC ACID-CO-ACRYLAMIDE) HYDROGELS ON CARBON DIOXIDE ADSORPTION. [Final Year Project] (Submitted)

MEOR NAZIR, MEOR AQIF IRFAN (2023) RAMAN SHIFT INVESTIGATION OF SULPHUR SPECIES DETECTION IN BI-PHASIC SYSTEM. [Final Year Project] (Submitted)

MOHAMED RAZI, NURUL FATIHAH (2023) CATALYTIC PERFORMANCE OF CO/AL2O3-LA2O3 IN THE VALORIZATION OF PETROLEUM SLUDGE TO VALUE ADDED PRODUCTS. [Final Year Project] (Submitted)

MOHD AMIN, MUHAMMAD NASIHIN AMIR (2023) CFD MODELLING OF GAS-LIQUID MIXTURE IN MICROCHANNEL REACTOR. [Final Year Project] (Submitted)

MOHD HAMDAN, AININ SOFIYA (2023) THE POTENTIAL OF ELECTRICITY AND LIPID PRODUCTION FROM MICROALGAE CULTIVATION. [Final Year Project] (Submitted)

MOHD RADZI, HALIMATUN SYAFIQAH (2023) APPLICATION OF MICROWAVE HEATING IN PREPARATION OF FUNCTIONALISED ACTIVATED CARBON FROM RUBBER SEED SHELL AND COCONUT SHELL. [Final Year Project] (Submitted)

MOHD YAZ, MOHAMAD SYAFIQ (2023) UTILIZATION OF WASTE EMPTY FRUIT BUNCH (EFB) FOR HYDROGEN PRODUCTION VIA PYROLYSIS PROCESS. [Final Year Project] (Submitted)

MOHD YAZID, MUHAMMAD MIHJAQ AMARIN (2023) INVESTIGATION ON DYE REMOVAL USING GREEN AND LOW-COST AGRICULTURE BIOMASS. [Final Year Project] (Submitted)

MOHD ZAIDI, MUHAMMAD DANIAL AIMAN (2023) PRODUCTION OF GRAPHENE FROM WASTE PALM KERNEL SHELL BY LIGNIN EXTRACTION. [Final Year Project] (Submitted)

MOHD ZAMRI, NUR SHAFIQA (2023) COMPARATIVE ANALYSIS OF MINIMAL IGNITION TEMPERATURES OF LAYER AND CLOUDS OF SELECTED DUST. [Final Year Project] (Submitted)

MOLINARI, HARIZ (2023) GRAPHENE-BASED MEMBRANE DEVELOPMENT FOR HYDROGEN ISOTOPE SEPARATION. [Final Year Project] (Submitted)

MUHAMAD ZAIDI, MUHAMMAD AKHMAL NAIM (2023) DIGITALIZATION OF ESG PERFORMANCE INDEX REPORTING FOR SEMICONDUCTOR MANUFACTURING INDUSTRIES. [Final Year Project] (Submitted)

MUHAMMAD FAISAL, MUHAMMAD ADIBFARHAN (2023) DEVELOPMENT OF INHERENTLY SAFER DESIGN ASSESSMENT FRAMEWORK USING PHENOMENA IDENTIFICATION AND RANKING TABLE (PIRT). [Final Year Project] (Submitted)

MUHAMMAD IZZUDDIN, AHMAD IMRAN AFIF (2023) CHARACTERIZATION OF MCF SUPPORTED NI-ZR CATALYST AND ITS EFFECT ON THE ESTERIFICATION OF ACETIC ACID AND GLYCEROL TO ACETIN. [Final Year Project] (Submitted)

MURUGEN, SHUUWEATHA (2023) ESTERIFICATION OF GLYCEROL WITH ACETIC ACID USING NICKEL- COBALT SUPPORTED ON MESOCELLULAR FOAM (MCF) CATALYST. [Final Year Project] (Submitted)

Mohamed Nohairi, Muhammad Irfan Syamil (2023) Delignification of oil palm empty fruit bunches using deep eutectic solvent assisted by ultrasound and valorization by enzymatic hydrolysis. [Final Year Project] (Submitted)

Murugayah, Rhuvaynn Vignesh (2023) Cultivation and Extraction of Polyhydroxybutyrate from Microalgae. [Final Year Project] (Submitted)

NAZARUDIN SHAH, NURUL’AIN SHAHIRA (2023) DEVELOPMENT OF ZEOLITE IMIDAZOLATE FRAMEWORK – 7 FOR METHANE CAPTURE. [Final Year Project] (Submitted)

NAZRI, NURIN ADIA (2023) LNG COLD ENERGY RECOVERY USING COMBINED PINCH-EXERGY ANALYSIS. [Final Year Project] (Submitted)

NG, YING HUEY (2023) USING OPERATIONAL DATA-DRIVEN STATIC BAYESIAN NETWORK FOR PERFORMANCE MONITORING OF OFFSHORE CENTRIFUGAL GAS COMPRESSOR TO PREDICT INSPECTION. [Final Year Project] (Submitted)

NGU, JENNIE SIEW ZHEN (2023) INVESTIGATION OF BIO-OIL EXTRACTION FROM DELIGNIFIED EMPTY FRUIT BUNCH (EFB) VIA SUPERCRITICAL CARBON DIOXIDE AND SOXHLET EXTRACTION. [Final Year Project] (Submitted)

NORIZAN, NUR SABRENA NATASHA (2023) DISPERSANT EFFECTIVENES ON OIL SPILL. [Final Year Project] (Submitted)

NUR FATIN NAJIHAH, FAIZAL (2023) DETERMINATION OF NANOCRYSTALLINE CELLULOSE FROM KENAF. [Final Year Project] (Submitted)

ONG, VIVIAN (2023) MOLECULAR DESIGN OF HYDROPHOBIC SILICA FILLER IN POLYPROPYLENE BASED MIXED MATRIX MEMBRANE CONTACTOR FOR CO2/CH4 SEPARATION. [Final Year Project] (Submitted)

OTHMAN, MASITAH (2023) SUGAR ALCOHOLS AS CRYOPROTECTANTS TO PRESERVE PHYSICOCHEMICAL CHARACTERISTICS AND SHELF LIFE OF FROZEN FRUITS. [Final Year Project] (Submitted)

PAI, JUN JIE (2023) SCREENING & DESIGN BIOCOMPATIBLE AND BIODEGRADABLE IONIC LIQUIDS USING COSMO-RS FOR FOOD INDUSTRIES. [Final Year Project] (Submitted)

Phua, Hui Sin (2023) Preparation & Evaluation of Reduced Graphene Oxide from Lignin of Rubber-Seed Shell (RSS) as Potential Supercapacitor. [Final Year Project] (Submitted)

RAMSHIDI, MOHAMMAD NAZLAN (2023) THE EFFECTS OF ELECTRON BEAM RADIATION TO THE CARBON DIOXIDE ADSORPTION PROPERTIES OF AMINE-IMPREGNATED POLY(ACRYLAMIDE-CO-ACRYLIC ACID) AEROGEL. [Final Year Project] (Submitted)

RAZMAN, ALISSA NADIA (2023) ELUCIDATION OF ADSORPTION PROPERTIES OF ZEOLITE 13X FOR CO₂ CAPTURE BY USING MOLECULAR SIMULATION APPROACH. [Final Year Project] (Submitted)

REUBEN, JASHMEN (2023) MODELLING OF UNIFORM FLOW FLUID IN DESIGNING NUMBERING-UP MICROCHANNEL REACTOR. [Final Year Project] (Submitted)

ROEDY BOEAMEN, NURFARAH AIN (2023) KINETIC EVALUATION OF METHYLENE BLUE ADSORPTION USING GRAPHENE-HYDROGEN TITANATE NANOTUBES (HTNT) COMPOSITE. [Final Year Project] (Submitted)

ROSMIZAN, MOHAMAD FIRDAUS (2023) SEEDED FRACTIONATION OF REFINED, BLEACHED AND DEODORISED PALM OIL (RBDPO) THROUGH PROGRESSIVE FREEZING (PF). [Final Year Project] (Submitted)

ROZY, NUR ALIAH (2023) DEVELOPMENT OF NANOCELLULOSE FROM BIOMASS USING IONIC LIQUIDS WITH CARBOXYLATED NITRILE BUTADIENE RUBBER COMPOSITE. [Final Year Project] (Submitted)

RUSLI, AINA AFRINA (2023) AUTOMATED TARGETING MODELLING (ATM) FOR WATER-CARBON NEXUS STUDY OF OPTIMAL WATER SYSTEMS DESIGN. [Final Year Project] (Submitted)

Ravi, Divin Kumar (2023) Bio Lubricant Production Over Modified Alkaline Catalyst from Waste Pome. [Final Year Project] (Submitted)

SAPIE, MUHAMMAD ATIF SHUKRY (2023) PERFORMANCE ANALYSIS OF ALKALINE-SURFACTANT-POLYMER IN PRODUCING ULTRALOW INTERFACIAL TENSION VALUE TO ACHIEVE WINSOR TYPE III MICRO EMULSION. [Final Year Project] (Submitted)

SARANGAPANI, AGATHIYAR VARMAN (2023) QUANTITATIVE RISK ASSESSMENT OF HYDROGEN DELIVERY INFRASTRUCTURE. [Final Year Project] (Submitted)

SHAHFUL BAHARIN, SYAWALIEYANA NATASYA (2023) SYNERGETIC EFFECTS OF BENTONITE CLAY AND SODIUM DODECYL SULPHATE ON THE FORMATION OF CO2 HYDRATE. [Final Year Project] (Submitted)

SHAHRIL, HADIF HARRAZ (2023) STUDY OF MULTIPURPOSE CHEMICAL INHIBITOR FOR CORROSION USING LINEAR POLARIZATION RESISTANCE IN CO2 RICH GAS. [Final Year Project] (Submitted)

SHANMUGAM, YOSHINII (2023) A COMPARATIVE TECHNO-ECONOMIC ANALYSIS OF STEAM REFORMING AND BI-REFORMING OF METHANE FOR METHANOL SYNTHESIS. [Final Year Project] (Submitted)

SHARIFFUDDIN, MUHAMMAD NABIL FIKRI (2023) QUANTIFICATION AND MITIGATION OF CARBON FOOTPRINT IN PETROLEUM REFINERY PROCESS THROUGH SIMULATION SOFTWARE. [Final Year Project] (Submitted)

SHARIMAN, AFIQAH SYAHIRAH (2023) QUANTITATIVE RISK ASSESSMENT OF HYDROGEN PRODUCTION FACILITY. [Final Year Project] (Submitted)

SIM, JIA LI (2023) ENHANCING CARBON REDUCTION WITH LIGNIN/Mg-DOPED TiO2 PHOTOCATALYST: EXPLORING THE IMPACT OF SONICATION DURATION, LIGHT SOURCES, AND HOLE SCAVENGER. [Final Year Project] (Submitted)

SOLIHAN, MUHAMMAD IMAN DAFFA (2023) SYNTHESIS OF COFFEE GROUND BASED ACTIVATED CARBON VIA A SINGLE STEP CO2 ACTIVATION. [Final Year Project] (Submitted)

SRINIVASAN, DIVIYAN (2023) EXPERIMENTAL STUDY OF FORMATION OF CO2 GAS HYDRATE IN PRESENCE OF POLYSORBATE 80. [Final Year Project] (Submitted)

TAMILVANAN, SURIYA (2023) COMPARATIVE QUANTITATIVE RISK ASSESSMENT FOR PC MTBE PROPANE DEHYDROGENATION (PDH) PLANT PETRONAS FACILITY USING DNV SAFETI AND ALOHA SOFTWARE. [Final Year Project] (Submitted)

TAMIN, NUR FATIHAH (2023) DEVELOPMENT OF ADSORBENT DERIVED FROM PALM OIL WASTE FOR RUBBERY WASTEWATER TREATMENT. [Final Year Project] (Submitted)

TAN, GARY YIH LUEN (2023) FABRICATION AND CHARACTERIZATION OF UZM-5/POLYSULFONE MIXED MATRIX MEMBRANE FOR CO2 /CH4 GAS SEPARATION. [Final Year Project] (Submitted)

TAN, HONG KIAT (2023) PERFORMANCE ASSESSMENT AND PLANTWIDE CONTROL OF N-BUTANE ISOMERIZATION PROCESS. [Final Year Project] (Submitted)

TAN, YONG ZHEN (2023) POLYSTYRENE WASTE-DERIVED MEMBRANES FOR CO2/CH4SEPARATIONS: OPTIMIZATION OF OPERATING CONDITIONS. [Final Year Project] (Submitted)

THANGARAJAH, JEGHAN (2023) DEVELOPMENT OF NEW INDEX FRAMEWORK TO EVALUATE SAFETY PERFORMANCE LEVEL USING PROXIMITY TO TARGET APPROACH FOR OIL AND GAS INDUSTRY. [Final Year Project] (Submitted)

THINAKARAN, RHESIKA (2023) SIMULATION THE ADSORPTION CAPACITY OF CARBON BASED-ADSORBENTS TOWARDS HEAVY METALS FROM WASTEWATER USING MACHINE LEARNING. [Final Year Project] (Submitted)

TUAN AZMI, TUAN AMIRUL HAZIM (2023) HOTSPOT DETECTION OF PHOTOVOLTAIC PANEL IN LARGE SCALE SOLAR (LSS) FARM USING CONVOLUTIONAL NEURAL NETWORK (CNN). [Final Year Project] (Submitted)

TUNG, WEI LAM (2023) MULTI-OBJECTVTIVE OPTIMIZATION OF CARBON DIOXIDE UTILIZATION SCHEME TO PRODUCE VALUABLE FUELS USING PYTHON AND ASPEN PLUS. [Final Year Project] (Submitted)

Timothy, Gladys Calvina (2023) Automated Targeting Modeling for Optimal Water System Design Considering Water-Carbon Nexus. [Final Year Project] (Submitted)

UTUMBER SINGH, NAVINJEET KAUR (2023) APPLICATION OF CHITOSAN-BASED RUBBER SEED SHELL ACTIVATED CARBON ON REMOVAL OF Pb2+, Cd2+, OIL AND GREASE. [Final Year Project] (Submitted)

Vasuthevan, Loshini (2023) Utilizing Microalgae Biomass as a Source of Biofertilizer to Grow Agriculture Plant. [Final Year Project] (Submitted)

WAN USAMAH, WAN AMIRATUL FAIZA (2023) PALM OIL WASTE TORREFACTION USING FLARE GAS. [Final Year Project] (Submitted)

WONG, BERLINDA WEI WEI (2023) SULFONATED POLY (ETHER ETHER KETONE) MEMBRANE IMPREGNATION BY IONIC LIQUID IN DEIONIZED WATER FOR H2 PRODUCTION. [Final Year Project] (Submitted)

WONG, WEI HAN (2023) OPTIMIZATION OF METHANOL INDUCED IONIC LIQUID IMPREGNATED SPEEK FOR PEM. [Final Year Project] (Submitted)

WOO, KAI TONG (2023) CO-COMPOSTING OF BLACK SOLDIER FLY (BSF) FRASS FOR HIGH VALUE ORGANIC FERTILIZERS. [Final Year Project] (Submitted)

YAP, HUI YING (2023) ASSESSMENT OF PRE-TREATMENT TECHNOLOGIES FOR THE RECOVERY OF PROTEIN FROM MICROALGAE. [Final Year Project] (Submitted)

YUSOFF, IZZAH SYAHIRAH (2023) SPEEK-SILICA PROTON EXCHANGE MEMBRANE FOR WATER ELECTROLYSIS. [Final Year Project] (Submitted)

Yi Ni, Celestine Wong (2023) Optimization of Ethylene Oxide Production via Hydrogen Peroxide Process Route. [Final Year Project] (Submitted)

Yi Tong, Amanda Yap (2023) Development of PVDF-HFP Silica Superomniphobic Membrane for CO2 Capture in Membrane Gas Absorption. [Final Year Project] (Submitted)

ZULKIFLI, MUHAMMAD FAIZ (2023) ENHANCEMENT OF HYDROGEN TITANATE NANOTUBES (HTNT) ADSORPTION OF METHELYNE BLUE (MB) BY USING MULTI WALLED CARBON NANOTUBES (MWCNT): A KINETIC STUDY. [Final Year Project] (Submitted)