Items where Department / MOR is "Civil" and Year is 2022

ADNAN, MUHAMMAD AZRUL (2022) IMPACT OF HOUSEBOAT WASTEWATER ON REMOVAL OF ORGANICS FROM SMALL SEWAGE TREATMENT SYSTEM (SSTS) AT TASIK TEMENGGOR, GERIK, PERAK. [Final Year Project] (Submitted)

AHMED JA’E, IDRIS (2022) DEVELOPMENT OF A NUMERICAL OPTIMIZATION TOOL FOR FPSO MOORING LINE PARAMETERS. Doctoral thesis, UNSPECIFIED.

AZLAN, FATIH SINAN (2022) FRAGILITY ANALSIS OF FIXED OFFSHORE PLATFORM IN MALAYSIA UNDER EARTHQUAKE EFFECT. [Final Year Project] (Submitted)

AZMERA, ZAKIAH HANUM (2022) THE EFFECTS OF CHANGES IN SOCIALIZING TRIPS, DISCRETIONARY TRIPS AND ACTIVITIES DURING COVID-19 PANDEMICS ON AFFECTIVE WELL-BEING. [Final Year Project] (Submitted)

Abdi, Nur Shalin (2022) Effects of Change of Socialising and Discretionary Trips, and Activities During COVID-19 Pandemic on Social and Mental Health. [Final Year Project] (Submitted)

Abdul Manaf, Muhammad Nashrun Naim (2022) Use Of Hexagonal Cork Sheets For Evaporation Control: An Experimental. [Final Year Project] (Submitted)

Abdul Rashid, Abdul Rais (2022) Effects of Shear Studs and Opening in the Mechanical Performance of the Composite Floor Deck – Numerical Modelling. [Final Year Project] (Submitted)

Abdul Razak, Muhammad Zulfaqar (2022) Push Out Test for Concrete Filled Steel Tubular Using Different Strengths of Ultra High Perfomance Concrete. [Final Year Project] (Submitted)

Ahmad, Afnan (2022) Sustainable Application Of Scraped Shreded Tires, Silica Fume ,And Bitumen Emulsion In The Peat Soil Improvement. Masters thesis, Universiti Teknologi PETRONAS.

Alias, Mohamad Rahmad (2022) Response Surface Methodology (RSM) Optimization of Geopolymer Palm Oil Clinker Fines (GeoPOCF) and Bitumen Content for Geopolymer Modified Asphalt Mixtures. [Final Year Project] (Submitted)

Aliges, Risban (2022) Potential Additive in Engineered Soil Media for Train Treatment System. [Final Year Project] (Submitted)

Altaf, Muhammad (2022) Integrating Building Information Modelling (BIM) to Automate Life Cycle Cost Analysis (LCCA) for Building Projects. Masters thesis, Universiti Teknologi PETRONAS.

Azhar, Ahmad Amin Hakim (2022) The Effect of Bonded Length of NSM-CFRP Sheets on The Performance of Shear-Strengthened RC Beams. [Final Year Project] (Submitted)

Azlan, Dayang Dania Dayana (2022) Numerical Study Of The Effect Of Spectral Shape On Wave Breaking. [Final Year Project] (Submitted)

Baig, Mohammed Feras (2022) Assessment of Groundwater Potential and changes in Land Use patterns using Geographic Information System. Masters thesis, Universiti Teknologi PETRONAS.

Calvin, Woon (2022) The Effects of Socio-demographic Characteristics and Activity-Travel BehaviourChange on Online Activity Patterns during the Pandemic. [Final Year Project] (Submitted)

Fakhri Nizar, Muhammad Syahid (2022) Repurpose Waste Coal from Power Plant as A Subgrade Material. [Final Year Project] (Submitted)

GOH, ZHEN CHEAN (2022) INVESTIGATING THE MECHANICAL PROPERTIES Of LIGHTWEIGHT CO2 AERATED BRICK. [Final Year Project] (Submitted)

Hazizi, Nur Haziqah (2022) Geomechanical Properties of Mudstone of Semantan Formation in Gua Musang, Kelantan and Teriang Bera, Pahang. [Final Year Project] (Submitted)

Hesham, Muhammad Hadzmin (2022) Assessment of Coastal Vulnerability for Manjung Coast. [Final Year Project]

Husain, Amy Izzati (2022) Impact of Houseboats Wastewater Discharge on Performance of Small Sewage Treatment System (SSTS) in Removing Nutrient at Temenggor Lake. [Final Year Project] (Submitted)

IBRAHIM, MUHAMMAD BELLO (2022) GEOSPATIAL TEMPORAL FRAMEWORK ON LANDSLIDES MITIGATION STRATEGIES FOR PIPELINES. Doctoral thesis, UNSPECIFIED.

ISMAIL ALI, FOUAD ISMAIL (2022) ENHANCING THE STRUCTURAL PERFORMANCE OF RC BEAMS MADE OF HIGH-PERFORMANCE CONCRETE CONTAINING GRAPHENE NANOPLATELETS. Masters thesis, Universiti Teknologi PETRONAS.

JIE LIN, BEH (2022) TECHNO-ECONOMIC ASSESSMENT OF HYDROKINETIC TURBINE (HKT) APPLICATION IN MALAYSIA. [Final Year Project] (Submitted)

JIUN YANN, LEE (2022) Treatment of Sludge Waste from Electronic Factory and Conversion to Construction Material. [Final Year Project] (Submitted)

JOSHUA CHOO, LEY ERN (2022) Mechanical and Deformation Properties of Rubberized Engineered Cementitious Composites (ECC) Containing 3D-Printed Origami Hollow Bodies. [Final Year Project] (Submitted)

Juma’at, Najmi Afiq (2022) Dynamic Analysis of Floating Solar Unit Subjected to Waves & Current Loadings-Numerical Modelling. [Final Year Project] (Submitted)

KUPUSAMY, ASHWYEIN (2022) AUTOMATED DEFECTS DETECTION MODEL FOR IBS ELEMENTS CONSIDERING IR 4.0 APPLICATION ENVIRONMENT. [Final Year Project] (Submitted)

Kai Chuen, Fong (2022) Numerical Study of Nonlinear Wave Groups In Shallow Water. [Final Year Project] (Submitted)

Kamaruzaman, Nurul Balkhis Athirah (2022) Prediction of Land Use Changes and Flood Risk Maps Using GIS and ANN Modelling in Perak. [Final Year Project] (Submitted)

Khairul Anuar, Nurul Najihah (2022) Flood Susceptibility Mapping Using GIS and AHP in Kelantan. [Final Year Project] (Submitted)

Lim, Yue Sheng (2022) Graphene Modified Cement for High Performance Repair. [Final Year Project] (Submitted)

MOHD ALI, NUR IMAN (2022) Comparison of Mesophilic and Thermophilic Anaerobic Digestion of McDonald’s Wastewater. [Final Year Project] (Submitted)

MOHD HASBULLAH, MUHAMAD SYAHMI SYAQIR (2022) READINESS OF CONSTRUCTION INDUSTRY STAKEHOLDERS TOWARDS IR4.0. [Final Year Project] (Submitted)

MOHD SUKRI, MOHAMAD SYAHMI AIMAN (2022) ULTIMATE STRENGTH OF PLATES WITH OPENINGS UNDER AXIAL AND OUT-OF-PLANE LOADS. [Final Year Project] (Submitted)

Mansor, Mohammad Shakir (2022) Computational Modelling of Open Channel Flow Around Bridge Piers. [Final Year Project] (Submitted)

Mazli, Nur Syirin Syifaa (2022) Framework for Safety Control for Maintenance of Infrastructure Oil and Gas Project Using BIM. [Final Year Project] (Submitted)

Mohamad Razali, Muhammad Najmi Zafran (2022) Composting of Cooking Residue from Fast Food Restaurant and Fertilizer Production. [Final Year Project] (Submitted)

Mohamad Shiham, Nasiha Sofwani (2022) Numerical Simulation of Morning Glory Spillway at Various Discharge Capacity using Lattice Boltzmann Method. [Final Year Project] (Submitted)

Mohd Ariffin, Nur Izzati Alya (2022) Investigating Mechanical Properties of Reclaimed Asphalt Pavement Rejuvenated with Rubber Seed Oil. [Final Year Project] (Submitted)

Mohd Hamka, Nur Aqila (2022) Silica Gel from Sugarcane Bagasse Ash as Cement Replacement Material: Effect of Burning Temperature of Pre-Treated Sugarcane Bagasse Ash. [Final Year Project] (Submitted)

Mohd Imran, Mohammad Shazriel Hakimi (2022) Burst Stress Analysis of Large Green Hydrogen Offshore Pipeline Under Combined Loads. [Final Year Project] (Submitted)

Mohd Raihan, Afifah Nur Dina (2022) Smart rainwater harvesting for traditional housing in Malaysia using BIM. [Final Year Project] (Submitted)

Mohd Saleh, Nur Amira Nabilah (2022) Offshore Kinetic Energy Potential of Peninsular Malaysia by Using Hybrid Site Selection Method. [Final Year Project] (Submitted)

Mohd Zalaludin, Nasuha (2022) Boron Removal from Produced Water by Chemical Precipitation. [Final Year Project] (Submitted)

Othman, Muhammad Najib (2022) Effect of Wastewater Effluent from The Jetty’s Sewage Treatment Plant on Water Quality Around the Discharged Area. [Final Year Project] (Submitted)

PARAMA GIRI, YAJISH GIRI (2022) PROPERTIES OF RUBBERISED GEOPOLYMER CONCRETE. [Final Year Project] (Submitted)

Past Year Exam Question (2022) VEB1062 - COMPUTATIONAL METHODS FOR CIVIL (JANUARY). [Past Year Examination Question]

Pei En, Yuen (2022) Evaluate Health and Safety Improvement through BIM Adoption in Building Construction Projects. [Final Year Project] (Submitted)

Pereira, Eric Joseph (2022) Characterization Of Hydrodynamic Performances For A Membrane-Type Floating Wave Attenuator System. Masters thesis, Universiti Teknologi PETRONAS.

RAFIQ, WAQAS (2022) PERFORMANCE EVALUATION OF RECLAIMED ASPLHALT PAVEMENT MATERIALS USIN CRUDE PALM OIL AS A REJUVENATING AGENT. Doctoral thesis, UNSPECIFIED.

RONNIE WISIL, RAFELLINO (2022) BENDING BEHAVIOUR OF CONCRETE FILLED STEEL TUBE (CFST) WITH CARBON FIBRE REINFORCED POLYMER (CFRP). [Final Year Project] (Submitted)

Rahim, Nurul Izati (2022) Evaluation of Physical and Mechanical Performance of Self-Consolidating Concrete (SCC) containing Crumb Rubber and Nano-silica. Masters thesis, Universiti Teknologi PETRONAS.

Razali, Nur Diana Natasya (2022) Surface Settlement caused by Pipe Jacking Works crossing KL-Seremban Highway. [Final Year Project] (Submitted)

Roslan, Eriza Najwa (2022) The Assessment of Stormwater Management and Drainage Master Plan: Sepang, Malaysia and Surakarta, Indonesia. [Final Year Project] (Submitted)

Sharuzaman, Safea Diyana (2022) Geomechanical Properties of Sandstones of Semantan Formation in Jerantut, Pahang and Gua Musang, Kelantan. [Final Year Project] (Submitted)

Sofian Tan, Iwan Tan (2022) Hydrodynamic Interactions due to Detached Breakwaters used for Stabilisation of Tanjung Piai Shoreline. Masters thesis, Universiti Teknologi PETRONAS.

Sui Siang, Ng (2022) The Bonding Behaviour Between UHPC and Concrete Filled Steel Tubular with Different a/d Ratios and Shapes. [Final Year Project] (Submitted)

Suliaman, Intan Safwanah (2022) Non-Revenue Water (NRW): Strategy on Reducing and Managing Water Losses in Johor. [Final Year Project] (Submitted)

Syahrul Aman, Syafiqah (2022) Mechanical Properties of Crumb Rubber Mortar Containing Nano-Silica Using Response Surface Methodology. Masters thesis, Universiti Teknologi PETRONAS.

Thinakaran, Varunesh (2022) Factors Of Safety Misconduct Affecting Safety Performance At Tall Building Construction Site. Masters thesis, Universiti Teknologi PETRONAS.

USMAN, ALIYU (2022) PERFORMANCE EVALUATION OF REGULAR AND GAMMA-IRRADIATED WASTE POLYETHYLENE TEREPHTHALATE MODIFIED ASPHALT MIXTURES. Doctoral thesis, Universiti Teknologi PETRONAS.

Umat Lokman, Muhammad Zul Irfan (2022) Constructed Wetland System for Peat Soil Ecosystem Restoration and Water Quality Analysis. [Final Year Project] (Submitted)

Vadiveloo, Jivendra (2022) Boron Removal Through Precipitation Process in Produced Water. [Final Year Project] (Submitted)

YANG LEE, CHEE (2022) THE EFFECTS OF TRAVEL BEHAVIOUR CHANGE ON ONLINE ACTIVITY PATTERNS DURING THE COVID19 PANDEMIC. [Final Year Project] (Unpublished)

ZAIROL AFFENDI, NOR ZAFATINAH (2022) FLOOD SUSCEPTIBILITY MAPPING USING GIS AND FUZZY AHP. [Final Year Project] (Submitted)

Zainal Ariffin, Zakiah (2022) Slope Stability Analysis in Residual Soils. [Final Year Project] (Submitted)

Zeshan, Muhammad Talha (2022) Impact of Climate Change and Development of Modified Palm Geotextile for Mitigation of Soil Erosion in Perak. Masters thesis, Universiti Teknologi PETRONAS.

Zhen Wei, Yu (2022) Comparison on the Mechanical Properties of Wearing Course Materials between JKR & LLM Specification. [Final Year Project] (Submitted)