Items where Department / MOR is "Mechanical" and Year is 2009

Abd Rashid @ Abd Rasip, Mohd Hanafi (2009) Design Calculation ofthe Upgraded Equipments for Residue Plant Under Different Operating Capacity. [Final Year Project] (Unpublished)

Ali, Abd Azim Aizat Bin (2009) Application of Corrosion Prediction Software to Optimize Material Selection in Offshore Pipelines and Tubing. [Final Year Project] (Unpublished)

Ayob, Adzlan Bin (2009) Prediction of CO2 Corrosion for Welded Joints. [Final Year Project] (Unpublished)

Isa, Amirullah Bin (2009) EFFECTS OF AERODYNAMIC CHANGES FOR A CAR CAUSED BY ANOTHER IN ITS PROXIMITY: NUMERICAL STUDY. [Final Year Project] (Unpublished)

Makhtar, Aini Munirah bt (2009) Investigation of Stress Intensity Factor at Compact Tension Specimen. [Final Year Project] (Unpublished)

Md Saru, Mohd Syahrul Azman Bin (2009) A Study of Stress Distribution on Centrifugal Compressor Impeller Using Finite Element Analysis. [Final Year Project] (Unpublished)

Mustadza, Ameirul Azraie Bin (2009) CO2 Corrosion Study of Carbon Steel in Natural and Induced Film Forming Environment. [Final Year Project] (Unpublished)

Nasron, Noorul Ameen Bin (2009) Finite Element Analysis of Unstringed Squash Racket Frame to Improve its Impact Strength. [Final Year Project] (Unpublished)

Yaccob, Mohd Syazwan Akmal Bin (2009) Experimental Study on Strength of Friction Stir Spot Welding (FSSW). [Final Year Project] (Unpublished)

A. Jalil, Adibah (2009) Study on the Application of Electronic Fuel Injection to Carburetted Single Cylinder 4 Stroke Engine. [Final Year Project] (Unpublished)

A/L Kalai Chelven, A K Kartigesh (2009) Experimental and Numerical Investigation on 2-D Wing-Ground Interference. [Final Year Project] (Unpublished)

AMIN ABDELKHALIQ EL AMIN MOHAMED, AMIN ABDELKHALIQ (2009) Absorption and Desorption Of Hydrogen in Metal Hydrides. [Final Year Project] (Unpublished)

ANAK JAMIT, ADRIAN EE (2009) Feasibility Study of Using Turbine for Small Scale Power Generation. [Final Year Project] (Unpublished)

ANNANUR , KIZILOV (2009) FEASffiiLITY STUDY OF JATROPHA BASED MUD FOR IDGH PRESSURE LOW TEMPERATURE WELLS. [Final Year Project] (Unpublished)

Abd Malik, Mohamad Muaamar Gadafi (2009) Performance Analysis of Turbocharger in Diesel Engine. [Final Year Project] (Unpublished)

Abd Rahman, Mohd Safuan (2009) Study of Mist Elimination System. [Final Year Project] (Unpublished)

Abd. Rahman, Farah (2009) Design Optimization of a 2-Phase Gas/Liquid Separator. [Final Year Project] (Unpublished)

Abdul Rahim, Muhammad Fadhlilah Bin (2009) Preliminary Stress Analysis on Beam Surface As A Result of Char Expansion In A Fire Exposed Intumescent Coating. [Final Year Project] (Unpublished)

Abdul Wahab, Ahmad Izzat bin (2009) NC Codes Library for Pump Impeller Machining. [Final Year Project] (Unpublished)

Ahmad Shahrom, Mohd Faiz (2009) Design and Development of Thermal Energy Storage (TES) Tank. [Final Year Project] (Unpublished)

Alif Aiman bin Ahmad Othman, Alif Aiman (2009) Design of Robot Gripper Mechanism for ROBOCON Robot Competition. [Final Year Project] (Unpublished)

Amir Hossein Ghanizadeh, Amir Hossein (2009) Analysis of Gas Turbine Blade Cooling System. [Final Year Project] (Unpublished)

Amirul Hazman Bin Ilanmzah, Amirul Hazman (2009) Fault Detection System In A Pipeline (Sensor Part). [Final Year Project] (Unpublished)

Azizan B Kamarudin@Mohd Ramly, Azizan @Mohd Ramly (2009) Study the Dynamic Behavior of Elevated Temperature Micro-Bubbles in a Purification System. [Final Year Project] (Unpublished)

Azizdin, Amirul Iman Bin (2009) Stress Corrosion Cracking on Welding of Offshore Structure. [Final Year Project] (Unpublished)

Baharuddin, Asfahani Binti (2009) Design of Aeration System for the Lake Surrounding An Nur Mosque. [Final Year Project] (Unpublished)

Chong , Wei Kit (2009) Design and Fabrication of Solar Collector Enhanced by Paraffin as Phase Change Medium. [Final Year Project] (Unpublished)

Chua, Han Jim (2009) Development of Hybrid Solar Chimney. [Final Year Project] (Unpublished)

Dams, Mohd Ridhuan (2009) DESIGNING AND SIMULATE AN ACTIVE PID CONTROLLER FOR A VEIDCLE SUSPENSION SYSTEM VIA CONTROLLABLE DAMPING DEVICES. [Final Year Project] (Unpublished)

Deep Kumar A/L Pravin Kumar, Deep Kumar (2009) Study on Side Wind Effects on Aircraft Aerodynamics Characteristics. [Final Year Project] (Unpublished)

Edwin Cheng Eu , Winn (2009) Study & Analysis on Regenerative Suspension as part of Hybrid Vehicle System. [Final Year Project] (Unpublished)

Fakurruddin, Fauzan Bin (2009) DESIGN OF PROPULSION SYSTEM FOR UNDERWATER REMOTELY OPERATED VEHICLE (ROV). [Final Year Project] (Unpublished)

Fatah, Martin Choirul (2009) Prediction of CO2 Corrosion with the Presence of Low Concentrations Acetic Acid in Turbulent Flow Conditions. Masters thesis, UNIVERSITI TEKNOLOGI PETRONAS.

Gebreselassie, Tesfalidet Gebrehiwot (2009) Effects of Natural Sand on the Mechanical Properties of High Density Polyethylene and Polypropylene. Masters thesis, UNIVERSITI TEKNOLOGI PETRONAS.

Ghanizadeh, Amir Hossein (2009) Analysis of Gas Turbine Blade Cooling System. [Final Year Project] (Unpublished)

Halimatulssaadiah binti Wan Jusoh, Halimatulssaadiah (2009) Preliminary Study on the Electromechanical Characterization of Commercial Lead Zirconate Titanate Piezoelectric Ceramic Materials for Flying Micro Robot Actuators. [Final Year Project] (Unpublished)

Hamdan, Khaled (2009) Study on the Essential Variable ofWelding Procedure Specification (WPS) of Fillet Weld. [Final Year Project] (Unpublished)

Hani Sabrina Binti Zulkafli, Hani Sabrina (2009) Palm Biomass Characterization for Gasification Technology Of Enriched Hydrogen Production. [Final Year Project] (Unpublished)

Hassan, Ahmad Hadi Bin (2009) Study on the Air Conditioning Cooling Load and Operational Practices within Glazed Buildings in Universiti Teknologi PETRONAS. [Final Year Project] (Unpublished)

Hendry Hadi bin Hassan, Hendry Hadi (2009) Design and Analysis of an Application of Geo-Exchange Cooling System in Malaysia. [Final Year Project] (Unpublished)

Hendry Hadi bin Hassan, Hendry Hadi (2009) Design and Analysis of an Application of Geo-Exchange Cooling System in Malaysia. [Final Year Project] (Unpublished)

Hidayah Binti Awalludin, Hidayah (2009) Preliminary Study of Nitration of PETRONAS Calcined Cokes For Water Dispersible Solid Fuel. [Final Year Project] (Unpublished)

Hidayat, Mas Irfan Purbawanto Hidayat (2009) Fatigue Life Assessment of Polymer-Matrix Composites Under Variable Amplitude Loading Using Neural Networks. Masters thesis, UNIVERSITI TEKNOLOGI PETRONAS.

Hidayat bin Hamdani, Hidayat (2009) Effect of Electrical Parameters toward Structure and Properties of Anodized Layer in Anodized Aluminum Plates. [Final Year Project] (Unpublished)

Hisham Bin Osman, Hisham (2009) Torrefaction of Oil Palm Wastes for Improvement of Gasification Process. [Final Year Project] (Unpublished)

Hj Osman, Zaino! Rashid (2009) Design and Development of In-motion Tyre Inflator. [Final Year Project] (Unpublished)

INTAN MAZURA BINTI MOHD TAMBI, INTAN MAZURA (2009) Evaporative Solar Cooler System For Domestic Sector. [Final Year Project] (Unpublished)

Iryman Fikry bin Salleh, Iryman Fikry (2009) Study on Stress Concentration Factor (SCF) in a Tubular Gap K-Joint Subjected To Axial Loading. [Final Year Project] (Unpublished)

Isa, Ainirullah (2009) EFFECTS OF AERODYNAMIC CHANGES FOR A CAR CAUSED 3BY ANOTHER IN ITS PROXIMITY: NUMERICAL STUDY. [Final Year Project] (Unpublished)

Ismail Bin Ismayatim, Ismail (2009) Finite Element Analysis of Corroded Pipelines. [Final Year Project] (Unpublished)

Kalai Chelven, A K Kariigesh (2009) Experimental and Numerical Investigation on 2-D Wing-Gronnd Interference. [Final Year Project] (Unpublished)

Kalai Chelven, A K Kartigesh (2009) ExperimentaLand Numerical Investigation on 2-D Wing-Ground Interference. [Final Year Project] (Unpublished)

Kamarudin, Noor Maisarah (2009) Computer-Aided Inspection Approach Using 3D Digitizer. [Final Year Project] (Unpublished)

Kamarulzaman, Mohd Nizam B. (2009) Failure Analysis of The Copper Tubes for A Water Heater. [Final Year Project] (Unpublished)

Khadijah Hasshim, Khadijah (2009) Simulation of Crosswind Effects on Rail Vehicles. [Final Year Project] (Unpublished)

Khairul Fariz bin Khalil, Khairul Fariz (2009) Application of SIMULINK to Emulate Subsea Production System (SPS) Control Functions. [Final Year Project] (Unpublished)

Kheng Tat, Beh (2009) Design and Development of Hands-On Learning Kit for Statics. [Final Year Project] (Unpublished)

Khoo, Sze Wei (2009) Stress Intensity Factor for a Crack Emanating From a Shaft. [Final Year Project] (Unpublished)

Khor, Yin Yin (2009) Numerical Simulation of Solar-Flue Gas Chimney for Energy Recovery. [Final Year Project] (Unpublished)

Kizilov, Annanur (2009) Feasibility Study of Jatropha Based Mud for High Pressure Low Temperature Wells. [Final Year Project] (Unpublished)

Kok, Chee Kang (2009) Design and Development of Above Knee Prosthetic Knee Joint by Applying Design for Manufacture (DFM) Methodologies. [Final Year Project] (Unpublished)

Kresnajaya , Prasetia Pancakarsa (2009) Design of Contraflow Cleaning PIG for Pipeline Maintenance. Masters thesis, UNIVERSITI TEKNOLOGIPETRONAS.

Kum , Chee Yan (2009) CFD Simulation of Two Phase Flow and Hydrate Prediction in a Pipeline. [Final Year Project] (Unpublished)

Kurniawan, Budi Agung (2009) The Effect of Acetic Acid on Film Formation in Carbon Dioxide Corrosion. Masters thesis, UNIVERSITI TEKNOLOGI PETRONAS.

Lim, Chung Hyan (2009) Small Scale Rotational Moulding Machine. [Final Year Project] (Unpublished)

Lim , Kha Loon (2009) Riser Stress Analysis with Finite Element Approach. [Final Year Project] (Unpublished)

Lubis, Abdul Munir Hidayat Syah Lubis (2009) Tribological Studies of Brake Pad Materials: Effect of Contact Pressure, Sliding Speed, and Relative Humidity. Masters thesis, UNIVERSITI TEKNOLOGI PETRONAS.

Luis-Casiano Ndong Mikue, Luis-Casiano Ndong Mikue (2009) Study on Pumping System Design for Water Injection. [Final Year Project] (Unpublished)

MAHARUN, MUI’NUDDIN BIN (2009) DESIGN AND ANALYSIS OF A SMALL RACE CAR BODY FRAME. [Final Year Project] (Unpublished)

MD YAZID, MUHAMMAD HAIDAR (2009) A Fundamental Study on Drying Characteristics of Oil-Palm Fronds for Gasification. [Final Year Project] (Unpublished)

MOHAMED NYAN, ANAS (2009) THE PERFORMANCE EVALUATION OF FOUR TYPES WATER SOFTENER USED FOR BOILER. [Final Year Project] (Unpublished)

MOHAMMAD RADZI, NURUL HIDAYAH (2009) METAL-TO-METAL SEALING FOR fflGH PRESSURE SUBSEA PRODUCTION SYSTEM (SPS) BOLTED FLANGE CONNECTOR. [Final Year Project] (Unpublished)

Mahamad Rezali, Muhamad Izdan Zul Izzi b. (2009) DESIGN HARNESSING HOT SPRING’S ENERGY SYSTEM FOR COCOA BEANS DRYING. [Final Year Project] (Unpublished)

Mahamad Rezali, Muhamzad Izdan Zul Izi (2009) DESIGN HARNESSING HOT SPRINGS ENERGY SYSTEM FOR COCOA BEANS DRYING. [Final Year Project] (Unpublished)

Maharun, Mui'nuddin (2009) Design and Analysis ofA Small Race Car Body Frame. [Final Year Project] (Unpublished)

Majid, Mohd. Saifullah bin (2009) Design and Analysis of a Double Wishbone Suspension System. [Final Year Project]

Makalo Koos Khojane, Makalo (2009) Simulation of Fluid Flow in a Furnace Top Model of an Ethane Cracker. [Final Year Project] (Unpublished)

Mansor, Mohd Noor Hazman (2009) Study on C02 Corrosion in Oil Producing Well. [Final Year Project] (Unpublished)

Mansor, Mohd Noor Hazman bin (2009) Study on CO2 Corrosion in Oil Producing Well. [Final Year Project] (Unpublished)

Mat Saad, Muhammad Najib Bin (2009) Risk Based Inspection Study on Relief Valves at Offshore and Onshore Plant. [Final Year Project] (Unpublished)

Mat Zuki, Ikhwan Solihin (2009) Simulation of Flow around a Bus with Passive Drag Reduction Attachments. [Final Year Project] (Unpublished)

Mazreen bt Mohd Razali, Mazreen (2009) Fitness for Service of Corroded Pressure Vessel. [Final Year Project] (Unpublished)

Md Suhaimy, Ahmad Syafiq (2009) The Effect of Gypsum on the Performance of Intumescent Coating. [Final Year Project] (Unpublished)

Md Yudin, Ahmmad Shukrie Bin (2009) Air-Fin Coil Performance as a Function of Tube Layout. [Final Year Project] (Unpublished)

Mohamad, Maaruf (2009) STUDY OF MICROSTRUCTURE AND CHEMICAL PROPERTIES OF BARNACLES GROW AT EXTERNAL SURF ACE OF PIPELINES. [Final Year Project] (Unpublished)

Mohamad Farid bin Esa, Mohamad Farid (2009) Development of Electronic Fuel Injection System for Single Cylinder Small Engine. [Final Year Project] (Unpublished)

Mohamad Farid bin Esa, Mohamad Farid (2009) Development of Electronic Fuel Injection System for Single Cylinder Small Engine. [Final Year Project] (Unpublished)

Mohamad Gazali, Mohamed Zafir (2009) Study of Gas Turbine Blade Impingement Cooling. [Final Year Project] (Unpublished)

Mohamad Helmi Bin Abd Halim, Mohamad Helmi (2009) Smart Detector Device for Rooms and Offices. [Final Year Project] (Unpublished)

Mohamad Iqmal bin Nizamuddin, Mohamad Iqmal (2009) Design A Solar Parabolic Water Heater System For Absorption Refrigeration of the Zero-Energy Terrace House. [Final Year Project] (Unpublished)

Mohamad Zaid Bin Harris, Mohamad Zaid (2009) Design and Development of Low Temperature Zero Watt Alpha Type Stirling Engine. [Final Year Project] (Unpublished)

Mohamed, Mohamed Fathelrahman (2009) CFD Analysis of Ribbed Double Pipe Beat Exchanger. [Final Year Project] (Unpublished)

Mohamed, Mohamed Fathelrahman (2009) CFD Analysis of Ribbed Double Pipe Heat Exchanger. [Final Year Project] (Unpublished)

Mohamed Razali, Muhammed Raqib bin (2009) Stress Intensity Factor on a Surface Crack of Cylindrical Pressure Vessel. [Final Year Project] (Unpublished)

Mohamed Said Shahat Ahmed El-Khatib, Mohamed Said Shahat (2009) Absorption and Desorption of Hydrogen in Metal Hydrides. [Final Year Project] (Unpublished)

Mohamed Zafir Bin Mohamad Gazali, Mohamed Zafir (2009) Study of Gas Turbine Blade Cooling. [Final Year Project] (Unpublished)

Mohammad `Izzat Bin Mohd Radzi, Mohammad `Izzat (2009) Effect of Clay (Vermiculite) as Reinforcement in Mechanical Properties Epoxy Matrix Composite Materials. [Final Year Project] (Unpublished)

Mohd Aizat bin Mohd Nordin, Mohd Aizat (2009) Analysis of the Dynamic Interference between Stator and Rotor of a Refrigeration Compressor Motor by using Finite Element Method. [Final Year Project] (Unpublished)

Mohd Azhan Bin Hasbullah, Mohd Azhan (2009) Comparison of different cross-sectional cooling channels for better heat dissipation. [Final Year Project] (Unpublished)

Mohd Azmi bin Mohd Dzaki, Mohd Azmi (2009) Plasma Gasification to Produce Gaseous Fuels from Oil Palm's empty Fruit Bunch. [Final Year Project] (Unpublished)

Mohd Azra'in Zainuddin, Mohd Azra'in (2009) Study og Engine Performance when Using Ethanol as Blended Fuel For Spark Ignition Engine. [Final Year Project] (Unpublished)

Mohd Azra’in Zainudin , Mohd Azra’in (2009) Study Of Engine Performance When Using Ethanol As Blended Fuel For Spark Ignition Engine. [Final Year Project] (Unpublished)

Mohd Azuan bin Mohd Azlan, Mohd Azuan (2009) Design of Composite Stairs in UTP Academic Blocks. [Final Year Project] (Unpublished)

Mohd Badruddin bin Karim, Mohd Badruddin (2009) The Effect of Thermal Aging to The Impact Properties of Glasss Fiber Reinforced Epoxy. [Final Year Project] (Unpublished)

Mohd Erzo Bin Mohamad Sharip, Mohd Erzo (2009) Corrosion Prevention of Carbon Steel Using Tapioca Polysaccharides – Based Coating. [Final Year Project] (Unpublished)

Mohd Fahmi Abdul Rahim, Mohd Fahmi (2009) Wind load effect on train station. [Final Year Project] (Unpublished)

Mohd Faisal Bin Ab Ghani, Mohd Faisal (2009) Development of An Experimental Gantry Crane Rig. [Final Year Project] (Unpublished)

Mohd Faiz bin Sofian, Mohd Faiz (2009) Study on Hydrogen-On-Demand (HOD) System. [Final Year Project] (Unpublished)

Mohd Fazril Irfan bin Ahmad Fuad, Mohd Fazril Irfan (2009) Thermal Spray Coating for Corrosion Under Insulation Prevention. [Final Year Project] (Unpublished)

Mohd Firdaus B Sapidih, Mohd Firdaus (2009) Lift Force Analysis on Australian Aboriginal Boomerang of Several Design Variations Parameters. [Final Year Project] (Unpublished)

Mohd Ghazali, Ahmad Nadiy (2009) Development of a Computer Programto Assess Gas Compressor Performance. [Final Year Project] (Unpublished)

Mohd Hanafi Bin Abd Rashid @ Abd Rasip, Mohd Hanafi (2009) Design Calculation of the Upgraded Equipments for Residue Plant Under Different Operating Capacity. [Final Year Project] (Unpublished)

Mohd Haziq Bin Ahzahar, Mohd Haziq (2009) Design and Fabrication of on Roof Solar Chimney. [Final Year Project] (Unpublished)

Mohd Husairil Bin Ibrahim, Mohd Husairil (2009) Preventive Program for Small Bore Piping Failure At Gas Processing Plant. [Final Year Project] (Unpublished)

Mohd Irsyaduddin bin Ab. Latif, Mohd Irsyaduddin (2009) Design of A Structural Beam for Future UTP Composite Canopy. [Final Year Project] (Unpublished)

Mohd Isa, Ahmad Safwan Bin (2009) Evaluation on Rust Stabilizer Paint for Maintenance Painting of Internal Pipeline. [Final Year Project] (Unpublished)

Mohd Khairi B. Che Abdullah, Mohd Khairi (2009) Effects of Aerodynamics Changes on A Car Caused by Another in Its Proximity: An Experimental Study. [Final Year Project] (Unpublished)

Mohd Murad, Safwan Hanis (2009) Study ofa New Air Intake System for a Single Cylinder, Fuel Injection, 4 stroke Go-Kart engine. [Final Year Project] (Unpublished)

Mohd Nasihuddin, Wan Mohd Hariri (2009) PRE-DESIGN LATENT HEAT THERMAL ENERGY STORAGE USING ENERGY FROM ELECTRICITY GRID. [Final Year Project] (Unpublished)

Mohd Noramin bin Md Isa, Mohd Noramin (2009) A Non-Contact Strain Measurement Method. [Final Year Project] (Unpublished)

Mohd Nurul Amin b Adnan, Mohd Nurul Amin (2009) Investigation of Stress Intensity Factor in a Single Edge Notched Bend Test Piece. [Final Year Project] (Unpublished)

Mohd Ridzuan bin Abdul Rahim, Mohd Ridzuan (2009) Study on the Current Performance of Piping and Structure Coatings in Oil and Gas Field. [Final Year Project] (Unpublished)

Mohd Rizzat bin Mohd Razali, Mohd Rizzat (2009) Development of a Controller for a Partial Stroke Valve Testing. [Final Year Project] (Unpublished)

Mohd Rizzat bin Mohd Razali, Mohd Rizzat (2009) Development of a Controller for a Partial Stroke Valve Testing. [Final Year Project] (Unpublished)

Mohd Saufi, Mohd Soffian Ariff B (2009) An Experimental Study on Strength of Friction Stir Welding. [Final Year Project] (Unpublished)

Mohd Shakif Bin Ahmad, Mohd Shakif (2009) Design of High Temperature Testing Attachments for Universal Testing Machine. [Final Year Project] (Unpublished)

Mohd Shukri, Farah Syazwani Bt (2009) Fundamental Study of Alcohol Sprays. [Final Year Project] (Unpublished)

Mohd ‘Arriffuddin bin ‘Allauddin, Mohd ‘Arriffuddin (2009) An experimental study on microstructure of Friction Stir Welded plates. [Final Year Project] (Unpublished)

Mohd. Kamalmursyid Bin Rozibah, Mohd. Kamalmursyid (2009) Sliding of Elastically Similar Complete Contacts. [Final Year Project] (Unpublished)

Mpho, Nesamari (2009) Simulation of Flow around a Bus with Active Drag Reduction Systelft. [Final Year Project] (Unpublished)

Muda, Mohd Shafizan Bin (2009) The Effects of High Temperature Gas Nitriding on Mechanical and Physical Properties of Austenitic Stainless Steel. [Final Year Project] (Unpublished)

Muhamad Yunos, Muhamad Aizat (2009) Mechanical Properties of Oil Palm Empty Fruit Bunch (EFB) - High Density Polyethene (HDPE): Influence OfProcessing Techniques. [Final Year Project] (Unpublished)

Muhammad Bin Hasanudin, Muhammad (2009) Simulation and Modeling of Front Suspension System of Proton Gen-2 Model Car. [Final Year Project] (Unpublished)

Muhammad Hafiz bin Zakaria, Muhammad Hafiz b Zakiah (2009) Jet Sintering of High Temperature Carbon Steel Powder Particles. [Final Year Project] (Unpublished)

Muhammad Hafizullah Bin Shamsudin, Muhammad Hafizullah (2009) Conceptual Design of an Underwater Manipulator for AUV. [Final Year Project] (Unpublished)

Muhammad Rubaie bin Mohammad Tahir, Muhammad Rubaie (2009) Development of Schlieren Visualization System for Study of Flame Characteristics. [Final Year Project] (Unpublished)

Muhd. Aizat Nazmi Bin Yusoff, Muhd. Aizat Nazmi (2009) The Influence of Temperature on Mechanical Properties and Fiber Damage. [Final Year Project] (Unpublished)

Mukthar Rahman, Noorul Haskin (2009) Numerical Investigation of"On Roof Solar-Biomass Chimhey'. [Final Year Project] (Unpublished)

Myra Azwinna Binti Sapian, Myra Azwinna (2009) Improved Procedure to Prevent Hydrogen Induced Cracking for Welding Offshore Structures. [Final Year Project] (Unpublished)

Nesamari Mpho, Nesamari (2009) Simulation of Flow around a Bus with Active Drag Reduction System. [Final Year Project] (Unpublished)

Ng, Min Kiat (2009) Effects of Wake Turbulence on Aircraft Wing Model Experimental Method. [Final Year Project] (Unpublished)

Ng , Ming Kiat (2009) Effects of the Wake Turbulence on Aircraft Wing Model: Experimental Method. [Final Year Project] (Unpublished)

Nik Mohd Faizal Bin Nik Abd Ghani, Nik Mohd Faizal (2009) Design, Rapid Prototyping, and Testing of the Darrieus Wind Turbine. [Final Year Project] (Unpublished)

Noor Azman, Muhammad Noor Fadhli B. (2009) Development of a Laser Attenuation Measurement System for Quantification of Suspended Particles. [Final Year Project] (Unpublished)

Noor Nadia Azzahraa binti Afandi, Noor Nadia Azzahraa (2009) Effect of Rotational and Transverse Speeds on Friction Stir Welded Plates. [Final Year Project] (Unpublished)

Noraini Binti Esa, Noraini (2009) Comparison of Microstructure and Hardness of Sintered Carbon Fiber and Carbon Nanotubes Reinforced Copper Matrix. [Final Year Project] (Unpublished)

Norlina binti Mohd Sarkawi, Norlina (2009) Design of Ice Thermal Energy Storage System for GDC (UTP) Plant. [Final Year Project] (Unpublished)

Nur Azirah Binti Mat Radzi, Nur Azirah (2009) Exploratory Studies on Largely Available On The Shelf Materials for Smart Actuators. [Final Year Project] (Unpublished)

Nur Hafiz Bin Ahmad Zubir, Nur Hafiz (2009) Sand Control Selection for Wells in Tukau Field. [Final Year Project] (Unpublished)

Nur Hazwany Bt Mohd Hatta, Nur Hazwany (2009) Effects of Wake Turbulence on Aircraft Wing Section Numerical Study. [Final Year Project] (Unpublished)

Nur Liyana Farizah Binti Zahri, Nur Liyana Farizah (2009) A CFD Investigation into the Transient Aerodynamic Forces on Overtaking Road Vehicles Models. [Final Year Project] (Unpublished)

Nurhafizah Binti Abdullah, Nurhafizah (2009) Design and Fabrication of Portable Smoke Tunnel for Flow Visualization. [Final Year Project] (Unpublished)

Nurul Aini Binti Mohd Faudzi, Nurul Aini (2009) Microstructure Characterization of As-cast, Creep-tested and Ex-service Steam-methane Reformer Tube. [Final Year Project] (Unpublished)

Nurul Akma Binti Brahim, Nurul Akma (2009) Predicting Failures for Repairable System Subjected to Imperfect Maintenance. [Final Year Project] (Unpublished)

Nurul Hazirah Binti Abd Aziz, Nurul Hazirah (2009) Design Optimization of a 3-phase(oil,water,gas) Separator. [Final Year Project] (Unpublished)

Nurul Hidayah Binti Mohammad Radzi, Nurul Hidayah (2009) Metal-to-Metal Sealing for High Pressure Subsea Production System(SPS) Bolted Flange Connector. [Final Year Project] (Unpublished)

Nurul Zahirah binti Zainudin, Nurul Zahirah (2009) Study on The Material Factor in Erosion-Corrosion. [Final Year Project] (Unpublished)

OMAR, MOHD ADAM (2009) Thermal Stress Distribution In Brake Disc For Small Vehicle. [Final Year Project] (Unpublished)

P Dhinesh Kumar A/L Panneerchelvam, Dhinesh Kumar (2009) Study on Telescopic Walkway Design of Jetty Gangway. [Final Year Project] (Unpublished)

PEREIRA, ROBERT HARJONI (2009) SELECTION AND ANALYSIS OF ENGINE OF FSAE 2010. [Final Year Project] (Unpublished)

RUSLI, MOHAMAD FITRI (2009) FAILURE ANALYSIS STUDY ON THE CUTTER BLADE OF POLYPROPYLENE PELLETER DRIVE. [Final Year Project] (Unpublished)

Rashid, Amirah Binti (2009) Design of pico hydro turbine for remote areas. [Final Year Project] (Unpublished)

Rohaizam bin Abd Rahman, Rohaizam (2009) Study on Thermal Degradation Effects on Physical Property of Polymers. [Final Year Project] (Unpublished)

Rozibab, Mohd. Kamalmursyid (2009) Sliding of Elastically Similar Complete Contacts. [Final Year Project] (Unpublished)

Rozli, Megat Fazli (2009) Design, Rapid Prototyping and Testing of the Wells Turbine. [Final Year Project] (Unpublished)

SEVALOGA NATHAN, LOGESWARY (2009) ANALOGY OF MECHANICAL AND TRANSPORT PROPERTIES IN DISPERSE COMPOSITES. [Final Year Project] (Unpublished)

Sabrumdin, Nor Naillriya (2009) Stress Analysis of Riser using Finite Element Method (FEM). [Final Year Project] (Unpublished)

Safwan Hanis Bin Mohd Murad, Safwan Hanis (2009) Study of a New Air Intake System for a Single Cylinder, Fuel Injection, 4 stroke Go-Kart engine. [Final Year Project] (Unpublished)

Sahar, Nurizuan (2009) Solar Curing of Glass Fibre Reinforced Epoxy (GRE) Composite. [Final Year Project] (Unpublished)

Saleh Bin Hashim, Saleh (2009) Reduction of Noise Generated by Electric Motor in Typical Home Appliance Casing. [Final Year Project] (Unpublished)

Sidi, Sebastian anak (2009) Feasibility Study on the Replacement of Traditional Heat Exchanger by ALFA LAVAL COMP ABLOC in PETRONAS OPUs. [Final Year Project] (Unpublished)

Sim Mei Sze, Deborah (2009) CFD Simulation of Multipurpose Solar Dryer. [Final Year Project] (Unpublished)

Siti Fatimah Bt Abdul Aziz, Siti Fatimah (2009) Study of Mechanical Properties of Sand Control Screens for Deepwater Applications. [Final Year Project] (Unpublished)

Siti Khadijah Md. Rawi, Siti Khadijah (2009) Study on the Effects of Reinforcing Chicken Feather Fiber (CFF) on Mechanical Properties of Polypropylene (PP). [Final Year Project] (Unpublished)

Suhaimi Bin Shazali, Suhaimi (2009) Failure Analysis on the Wire Rope for Lifting Equipment. [Final Year Project] (Unpublished)

Sundraj, Suthan Aravinthan (2009) Research and Analysis of a Micro EDM System. [Final Year Project] (Unpublished)

Tan, Kien Weng (2009) Simulation And Flow Characterization Of Spiked Supersonic Gas Turbine Intake At Non-Zero Angle Of Attack. [Final Year Project] (Unpublished)

WONG, WAI KIT (2009) PREDICTING THE RELIABILITY OF A REPAIRABLE SYSTEM WITH COMPETING FAILURE MODES. [Final Year Project] (Unpublished)

Wan Amirudin bin Wan Mohamad Noor, Wan Amirudin (2009) Design and Analysis of a Small Formula-Style Race Car Suspension System. [Final Year Project] (Unpublished)

Wan Ghazali, Wan Nor Maawa (2009) Design and Analysis of a Pedal Box System for FSAE 2010. [Final Year Project] (Unpublished)

Wan Mohd Aizuddin Bin Wan Doshah, Wan Mohd Aizuddin (2009) Development of Sway Angle Measurement System. [Final Year Project] (Unpublished)

Wan Mohd Hariri B. Mohd Nasihuddin, Wan Mohd Hariri (2009) Pre-design Latent Heat Thermal Energy Storage using Energy from Electricity Grid. [Final Year Project] (Unpublished)

Wan Normimi Roslini Binti Abdullah, Wan Normimi Roslini (2009) Study on Corrosion Inhibitor Efficiency for Carbon Steel in CO2 Corrosion. [Final Year Project] (Unpublished)

Wong , Peck Koon (2009) Micro Aerial Vehicle (MAV): An Aerodynamics Optimized Design. [Final Year Project] (Unpublished)

Wong , Wai Kit (2009) Predicting The Reliability Of A Repairable System With Competing Failure Modes. [Final Year Project] (Unpublished)

YAHYA, MOHD FARHAN (2009) Design and Development of a Vacuum Chamber for Resin Infusion Process. [Final Year Project] (Unpublished)

YEE , YUAN BIN (2009) Design of Control System for Quadruped Robot (4-Legged Robot). [Final Year Project] (Unpublished)

Yaccob, Mohd Syazwan Akmal (2009) Experimental studies on strength of friction stir spot welding (FSSW). [Final Year Project] (Unpublished)

Yee, Yuan Bin (2009) Design of Control System for Quadruped Robot (4-Legged Robot). [Final Year Project] (Unpublished)

Yee , Hong Hoe (2009) Active Vibration Cancellation of a Free-Piston Linear Generator Engine. Masters thesis, UNIVERSITI TEKNOLOGI PETRONAS.

Yee , Yuan Bin (2009) Design of Control System for Quadruped Robot (4-Legged Robot). [Final Year Project] (Unpublished)

Yusoff, Muhd. Aizat Nazmi (2009) The Influence ofTemperature on Mechanical Properties and Fiber Damage. [Final Year Project] (Unpublished)

ZAINAL, HASNIZA (2009) EFFECT OF OIL PALM FIBER REINFORCEMENT ON MECHANICAL PROPERTIES OF POLYSTYRENE. [Final Year Project] (Unpublished)

Zainal, Ahmad Muhaimin bin (2009) Effective Mechanical Seal for Pump Applications at Onshore Gas Terminal. [Final Year Project] (Unpublished)

Zainal Abidin, Muhammad Anas Bin (2009) Hydrogen Production via Ice Electrolysis. [Final Year Project] (Unpublished)

Zainol Rashid B. Hj. Osman, Zainol Rashid (2009) Design and Development of in-motion Inflator. [Final Year Project] (Unpublished)

Zakaria Bin Mohamed, Zakaria (2009) Effect of Chloride on Offshore Structure Welding Procedure. [Final Year Project] (Unpublished)

Zul Mahadzir Oyama bin Ahmad Oyama, Zul Mahadzir Oyama (2009) Replacing Self-Balancing System of Personal Transporter by Using Gyroscope. [Final Year Project] (Unpublished)

Zulkafli, Zuli Izwan Bin (2009) Design and Analysis of a Small, Lightweight and Single Cylinder Car Drive Train System for UTP Formula SAE Team (UTP-FSAE). [Final Year Project] (Unpublished)

Zulkifli, Haikal Bin (2009) Failure Analysis on Steel Tubing for Water Injection Well. [Final Year Project] (Unpublished)