Browse by Type

Ndong , Luis-Casiano Mikue (2008) Study on Pumping System Design for Water Injection. [Final Year Project] (Unpublished)

Abdullah, Muhamad Safrizal (2008) THE EFFECT OF POLYVINYL ALCOHOL (PVA) FffiER TO THE TENSILE STRENGTH OF CONCRETE. [Final Year Project] (Unpublished)

Awi, Azree Azhar (2008) STUDY OF CONCRETE FRACTURE SLl\iULA T!ON USING ANSYS. [Final Year Project] (Unpublished)

Mohd Yusof, Khairun Nadiah (2008) WIRELESS TEMPERATURE MONITORING SYSTEM. [Final Year Project] (Unpublished)

Ahmad, Zarizambri (2008) Design and Analysis of a Pedal Box System for a small Race-car. [Final Year Project] (Unpublished)

Mohamad Rosalan, Mohamad Attirillah (2008) Performance of Used Engine Oil in High Strength Concrete and Behavior of the Structure under Dynamic Loading. [Final Year Project] (Unpublished)

Amaruddin, Haslin Idayu (2008) Possibility of Stabilizing Peat Soil Using Electroosmotic Method. [Final Year Project] (Unpublished)

Masilamani, Mariadas Brian (2008) SIDOARJO MUD AS A CEMENTITIOUS MATERIAL: A MYTH OR REALITY. [Final Year Project] (Unpublished)

Abusman, Nor Azian (2008) The effect of Microwave Incinerated Rice Husk Ash on foamed mortar. [Final Year Project] (Unpublished)

Rusli, Nurul Masnem Ahza (2008) Design of Table with Adjustable Height. [Final Year Project] (Unpublished)

Mohd Yusof, Mohd Shah Rizal (2008) Engine Performance and Exhaust Emission Characteristics of Fuel Oil-Diesel Fuel Mixture in a Single Cylinder Engine. [Final Year Project] (Unpublished)

Azman, Nur Syahinaz (2008) Further Treatment of Fertilizer Wastewater by Phytoremediation. [Final Year Project] (Unpublished)

Muharnad, Dzulkarnain (2008) RE-ENGINEERING OF THE AIR INTAKE MANIFOLD FOR UTP FORMULA CAR. [Final Year Project] (Unpublished)

LEE , PETER CHEE HONG (2008) DEVELOPING MULTI-DEGREES OF FREEDOM OF DEXTEROUS HUMANOID ROBOTIC HAND. [Final Year Project] (Unpublished)

Mohd, Muhammad Hadfiz (2008) Wave Energy Linear Motor/Generator. [Final Year Project] (Unpublished)

Ramli, Mohd Syahmi (2008) Experimental Assessment on Corrosion under Insulation (CUI). [Final Year Project] (Unpublished)

Ramsah, Mohd Fasya (2008) Characterization and Properties of Nickel Powder and Carbon Powder Mixture. [Final Year Project] (Unpublished)

Mohamad Hazli, Mohd Hafiz (2008) COD AND NITROGEN REMOVAL FROM FERTILIZER WASTEWATER EFFLUENT BY USING AN ENGINEERED WETLAND. [Final Year Project] (Unpublished)

Y ahaya, Mohd Roziee (2008) Effects of Particle Size on Mechanical Properties of Oil Palm Fruit Bunch Composites. [Final Year Project] (Unpublished)

Mohamed Rahim, Nur Aqilah (2008) Pile Selection Methodology. [Final Year Project] (Unpublished)

Abdul Halim, Rosni (2008) RESPONSES OF OTRC CLASSIC SPAR SUBJECTED TO RANDOM. [Final Year Project] (Unpublished)

Ab. Kadir, Shamimi (2008) CleverSecure ONLINE System. [Final Year Project] (Unpublished)

Mohamad Dahalan, Noor Magdelina (2008) FINANCIAL VISUALIZATION APPLICATION ADOPTING BIMODAL VISUALIZATION. [Final Year Project] (Unpublished)

Mohamed Azam Zaki, Durrussaadah (2008) i-Feeder (Intelligent Feeder). [Final Year Project] (Unpublished)

Raja Khairuddin, Raja Syazwani (2008) Online Batik Designing Tool. [Final Year Project] (Unpublished)

Othman, Zulkifley (2008) Online Hostel Defect Reporting System. [Final Year Project] (Unpublished)

Salehuddin, Nur Husna (2008) Persatuan Seni Silat Cekak Malaysia Universiti Teknologi PETRONAS (PSSCM UTP) Members Management System. [Final Year Project] (Unpublished)

Zaini, Muhammad Syakir (2008) Quality Control (QC) Process On Pipeline Engineering Geospatial Data. [Final Year Project] (Unpublished)

Hashim, Mohd Hafiz (2008) VXML: AN ALTERNATIVE SOLUTION TO ACCESSING WEBSITE'S CONTENTS. [Final Year Project] (Unpublished)

Nazri, Afdzal (2008) WISE - Wireless Sound Detector. [Final Year Project] (Unpublished)

Abdul Jalil, Muhammad Bukhari (2008) Freezing Point Depression Method for Hydrate Monitoring. [Final Year Project] (Unpublished)

JAMALUL KARIB, NUR BAITI (2008) HARDWARE IMPLEMENTATION OF A MINIMALLY COMPLEX RFID BASED DATA RETRIEVAL SYSTEM. [Final Year Project] (Unpublished)

Ramli, Norasyiken (2008) The effect of different aggregate types and grandation on the moisture susceptibility of b. [Final Year Project] (Unpublished)

MOHAMED HAMDAN, MOHAMAD FARID (2008) THE STUDY OF 2D THERMAL DISTRIBUTIONS USING FLUENT SIMULATION PROGRAM FOR PASSIVE SOLAR CONCEPT ' OF LOW RISE. BUILDING. [Final Year Project] (Unpublished)

Wan Chek, Mohd Najib (2008) ANALYSIS OF COASTAL EROSION AT MIRI CRUDE OIL TERMINAL. [Final Year Project] (Unpublished)

SARIN, FARHANA (2008) CHAOS BASED BLOCK ENCRYPTOR. [Final Year Project] (Unpublished)

Mazalan, Siti Fatimah (2008) Comparative Study of Different C02 Injection Modes for Baronia RV2 Reservoir. [Final Year Project] (Unpublished)

Mohd Ali, Ahmad Fadhil Hafiz (2008) The Enhancement of Micro Grinding Process by Using NdFeB to Seize Material Dust. [Final Year Project] (Unpublished)

A

Asmawi Bin Sha’ari, Asmawi (2008) Simulation Of Sintering In Powder Metallurgy Application For Ferrous Materials. [Final Year Project] (Unpublished)

Ab Karim, Rosnita Binti (2008) Non-Point Sources (NPS) PoUution Modelling and Water Quality Improvement Using Wetland. [Final Year Project] (Unpublished)

Aziz, Azman (2008) Design and Analysis of a Disc Rotor for a Small Race Car's Braking System. [Final Year Project] (Unpublished)

Arifin, Mohd Nurhadi (2008) The Investigation i11to Tribological Properties of Carbon Fiber Reinforced Composite. [Final Year Project] (Unpublished)

Ajid, Azlia (2008) Solar Powered Exhaust Fan for Automobiles. [Final Year Project] (Unpublished)

Abd Rahim, Muhammad Yusof (2008) Pressure as an Indicator for Water Breakthrough for Horizontal Well Completion. [Final Year Project] (Unpublished)

Azahariman Bin Azazian, Azahariman (2008) The Effects of Multiple-Use of Polyethylene Terephthalate (PET) Bottles on Antimony Concentration. [Final Year Project] (Unpublished)

ABDULLAH HAZIQ BIN HUSSAIN, ABDULLAH HAZIQ (2008) Virtual Saxophone. [Final Year Project] (Unpublished)

Ahmad Abeed Mohd Lotfy, Ahmad Abeed (2008) EXPERT PROFILE DATABASE for Computer and Information Sciences Department,UTP. [Final Year Project] (Unpublished)

Abu Bakar, Ahmad Ashraf (2008) EFFECT OF GEOGRAPHICAL LOCATION ON THE EFFECTIVENESS OF COUNTDOWN TIMER AT SIGNALIZED INTERSECTIONS. [Final Year Project] (Unpublished)

Amran, Mohd Hafiz (2008) Investigation On Savonius Wind Turbine In Directed Flow. [Final Year Project] (Unpublished)

Ahmad Abustaman, Mohd Zikri (2008) Processing of Alumina Powder into Ceramic Foam Materials by Impregnating Polyurethane Sponge with Bonded Ceramic Slurry. [Final Year Project] (Unpublished)

ABO HALIM, MOHO ASYRAFI (2008) SEA FORCES ON SUBSEA PIPELINES. [Final Year Project] (Unpublished)

Abdul Razak, Mohd Farhan (2008) THE IMPLEMNTATION OF PRE-CAST CONCRETE PANEL SYSTEM FOR HIGH-RISE RESIDENTIAL BUILDING IN MALAYSIA. [Final Year Project] (Unpublished)

Abdilah, Mohamad Arif (2008) Effect of Inorganic Compound on the Tensile Strength of Ordinary Portland Cement (OPC) Concrete. [Final Year Project] (Unpublished)

Ahmad Ruslan, Ahmad Ehsan (2008) Effect of Used Engine Oil to High Strength Microwave Incinerated Rice Husk Ash (MIRRA) Concrete. [Final Year Project] (Unpublished)

Ahmad Ruslan, Ahmad Ehsan (2008) Effect of Well Pattern to the Water Alternating Gas (WAG) Carbon Dioxide Injection on Angsi 1-35 Reservoir. [Final Year Project] (Unpublished)

AB RAZAK, MOHD ARIFF (2008) PROPERTIES AND UTILIZATION OF JATROPHA CURCAS OIL FOR FORMATION DAMAGE CONTROL. [Final Year Project] (Unpublished)

Ali, Fahmi (2008) Design and Analysis of Suspension System for a Formula SAE Race Car. [Final Year Project] (Unpublished)

Abdul Halim Koh, Abdul Rahman (2008) Failure Investigation of a Steel Pipe. [Final Year Project] (Unpublished)

Ayob, Mohamad Firdaus (2008) Investigation into the Potential ofBio-based Automotive Engine Lnbrieation Oil Using Tribologieal Test Method. [Final Year Project] (Unpublished)

Azemi, Mohd Aziman (2008) Failure Analysis of Heat Exchanger's Tubes at GPP Kerteh. [Final Year Project] (Unpublished)

Azazian, Azahariman (2008) The Effects of Multiple-Use of Polyethylene Terephthalate (PET) Bottles on Antimony Concentration. [Final Year Project] (Unpublished)

Amiruddin, Farah Syazana (2008) User Interface Design in Managing an Alarm System. [Final Year Project] (Unpublished)

Abdul Jabar, Nor Fazliana (2008) Vermicomposting of Municipal Sludge Using Eisenia Foetida. [Final Year Project] (Unpublished)

Aghdamy, Sanam (2008) Impacts of Environmental Loads on a Jack-up Offshore Structure. [Final Year Project] (Unpublished)

ALI AZMAN BIN OMAR, ALI AZMAN (2008) INVESTIGATION ON STRESS CONCENTRATION FACTOR OF PIPING BRANCH JUNCTIONS SUBJECTED TO INTERNAL PRESSURE. [Final Year Project] (Unpublished)

Ahmad, Mohd Asri (2008) Sensor Node for Medical Application. [Final Year Project] (Unpublished)

Ahmad, Mohd Azrin (2008) Design and Prototype of Specific Gravity based Element Identifier. [Final Year Project] (Unpublished)

ABDUL KADIR, KHADIJAH (2008) BLUETOOTH-BASED REMOTE MOBILE SURVEILLANCE ROBOT. [Final Year Project] (Unpublished)

AZHAR, AZWIN (2008) MODELING, SIMULATION AND ANALYSIS OF AN AUTOMOTIVE MANUFACTURING SYSTEM USING ARENA SOFTWARE. [Final Year Project] (Unpublished)

ABDULRHMAN IDRIS, MALIK ABDALLHA OSMAN (2008) OBJECT RECOGNITION BY USING ARTIFICIAL NEURAL NETWORK: Turning point based shape recognition using NN. [Final Year Project] (Unpublished)

Abdelwahid, Mohamed Noureldin (2008) STUCK DRILL PIPE WHILE DRILLING OPERATION. [Final Year Project] (Unpublished)

Arob Deng Chol, Michael (2008) Study of Stick-slip torsional vibration in Drilling Operation. [Final Year Project] (Unpublished)

Azhari Hassan, Sara (2008) DEVELOPMENT OFAN E- VOTING SYSTEM. [Final Year Project] (Unpublished)

A. NASR, AMIR AHMAD (2008) BLOGGING ASA MEANS OF KNOWLEDGE SHARING. [Final Year Project] (Unpublished)

Ahmad Hidayat Bin Dahalam, Ahmad Hidayat (2008) Design and Fabrication of a Brush Cutter to Lawn Mower Conversion Kit. [Final Year Project] (Unpublished)

Abdul Rahman, Nur Hayati (2008) Compilation of Design Guideline for Piled Raft Foundation. [Final Year Project] (Unpublished)

Abd Rahman, Nurhidayah (2008) Industrialized Building System (IBS): Applicability of Industrialized Floor Systems in Malaysia. [Final Year Project] (Unpublished)

Abdul Razak, Rodzleana (2008) Spatial Variability of SoU Engineering Properties at UTP Campus. [Final Year Project] (Unpublished)

Abd Rahim, Muhamad Farhan (2008) Anaerobic Treatment of Pharmaceutical Wastewater. [Final Year Project] (Unpublished)

Abu Hassan, Haneysa (2008) Spatial Variability of Arsenic in Groundwater (Case Study of Bangladesh). [Final Year Project] (Unpublished)

Ahmad, Mohd ArifBin (2008) Effect of Groundwater Level toward Slope Stability. [Final Year Project] (Unpublished)

Abd Rani, Fairuz Effendy (2008) A Portable Augmented Reality Science Laboratory. [Final Year Project] (Unpublished)

Alia Ditta, Ashmil Fanaz (2008) Aerobic Digestion of Municipal Waste Activated Sludge and Wastewater using SPRINKJET and Diffuser. [Final Year Project] (Unpublished)

A Rahman, Hamizah (2008) Design of an Explosion Vessel for Study of Flame Propagations. [Final Year Project] (Unpublished)

Abdul Halim, Muhammad Hafizi (2008) Electronic Voting System. [Final Year Project] (Unpublished)

Abu Hashim, Nor Nadia (2008) Image-based Modeling 2-Dimension to 3-Dimension model. [Final Year Project] (Unpublished)

Ab Rahim, Mohd Syahrin (2008) implementation of Value Engineering within consulting practice in Malaysia. [Final Year Project] (Unpublished)

Ahamad, Mohd Izuan (2008) MOBILE VOICE TO SIGN LANGUAGE SYSTEM. [Final Year Project] (Unpublished)

Abdul Rahim, Azhani (2008) MPPUTP Election via SMS. [Final Year Project] (Unpublished)

Asmoe, Mohammad Asree (2008) Online Payment System Using SMS. [Final Year Project] (Unpublished)

Abu Hassan, Safwan (2008) Online Physics Experiment. [Final Year Project] (Unpublished)

Abd Rahman, Siti Fatimah (2008) Online Sport Booking System. [Final Year Project] (Unpublished)

Abdul Hamid, Hafizan Lutfi (2008) Nitrogen and Phosphorus Removal from Effluent of Sewage Treatment Plant Using Water Lettuce (Pistia stratiotes). [Final Year Project] (Unpublished)

Abdul Rahman, Abdul Fatah (2008) Removal of Iron from Groundwater by Filtration through Carbonaceous Shale. [Final Year Project] (Unpublished)

AWALl, MOHD SHAHRIN (2008) Response spectrum analysis of medium rise buildings subjected To a far-field earthquake. [Final Year Project] (Unpublished)

Aziz, Ahmad Azfar (2008) Precipitation of Heavy Metals Using "Cuttlebone-Citrus Aurantifolia"(CB-CA ). [Final Year Project] (Unpublished)

Abdul Hasib, Nur Hazirah (2008) Providing Direction using Sight-Seeing Paradigm. [Final Year Project] (Unpublished)

Abdullah, Azizul (2008) REAL ESTATE VALUE FORECASTING SYSTEM USING DATA MINING AND NEURAL NETWORK APPROACH (REVFOS). [Final Year Project] (Unpublished)

Ahmad Tarmizi, Mohd Fairozlan (2008) Total Productive Maintenance Assessment on Discrete Manufacturing System. [Final Year Project] (Unpublished)

Abd Hamid, Alia Hafiza (2008) USE OF RECYCLE FERRIC CHLORIDE EXTRACTED FROM GROUNDWATER TREATMENT PLANT SLUDGE IN THICKENING OF MUNICIPAL SLUDGE AND TREATMENT OF LEACHATE. [Final Year Project] (Unpublished)

Abd, Rahim, Elnadia (2008) UTP e-College System Using AJAX Technology. [Final Year Project] (Unpublished)

Awang, Fauziah (2008) UTP Online Bookstore System. [Final Year Project] (Unpublished)

Abd Kahar, Amirul Hafiz (2008) Web based Islamic Will (E-Wasiat). [Final Year Project] (Unpublished)

Azrul Nizam Bin Othman, Azrul Nizam (2008) To Design and Develop Fe-Cu-C Alloying Suitable for Self Lubricating Bearing through Powder Metallurgy (P/M) Technique. [Final Year Project] (Unpublished)

Adeline Ervity Kehing, Adeline (2008) Wave Attenuation by Floating Breakwater. [Final Year Project] (Unpublished)

Alia Hafiza binti Abd Hamid, Alia Hafiza (2008) Use Of Recycle Ferric Chloride Extracted From Groundwater Treatment Plant Sludge In Thickening Of Municipal Sludge And Treatment Of Leachate. [Final Year Project] (Unpublished)

Ashmil Fanaz b. Alla Ditta, Ashmil Fanaz (2008) Aerobic Digestion of Municipal Waste Activated Sludge and Wastewater using Sprinkjet and Diffuser. [Final Year Project] (Unpublished)

Abdul Razak bin Rustami, Abdul Razak (2008) A Study into the Effect of Loading and Sliding Speed to the Tribological Properties of Brake Pad Material. [Final Year Project] (Unpublished)

Ahmad Damanhuri bin Sharipudin, Damanhuri (2008) New Design of Heat Spreader for Semiconductor Device. [Final Year Project] (Unpublished)

Ahmad Syahidi Bin Che Zainal, Ahmad Syahidi (2008) An Experimental Study On The Wave Induced Instability Of Pipelines: The Breakout Of Pipelines. [Final Year Project] (Unpublished)

Anis Rafie bin Ahmat Rmadani, Anis Rafie (2008) Repeating Weld Repair’s Effect on Microstructure and Mechanical Properties of Weld Metal. [Final Year Project] (Unpublished)

Ahmad Fadhil Hafiz Bin Mohd Ali, Ahmad Fadhil Hafiz (2008) The Enhancement of Micro Grinding Process By Using NdFeB To Seize Material Dust. [Final Year Project] (Unpublished)

Ahmad Fairus Bin Zamri, Ahmad Fairus (2008) Analysis of Jet Fire on Intumescent Coating Applied on Steel Substrate. [Final Year Project] (Unpublished)

Ahmad Khairuddin bin Ahmad Kamal, Ahmad Khairuddin (2008) CFD Simulation and Wind Tunnel Test of NACA 4412 Airfoil Wing Section at Different Angles of Attack. [Final Year Project] (Unpublished)

Aaron Ang Kok Wye, Aaron (2008) Design of an Exhaust System For The UTP Formula SAE Race Car. [Final Year Project] (Unpublished)

Adi Akmal Bin Nasrul Hisham, Adi Akmal (2008) Study and Improvement of Drag Coefficient of a Bus. [Final Year Project] (Unpublished)

Ahmad Exsan bin Othman, Ahmad Exsan (2008) Study on various types of antirust to prevent corrosion on heat sink terminal. [Final Year Project] (Unpublished)

Amir Fadhli Bin Razali, Amir Fadhli (2008) Monitoring the Dengue Population/Breeding ground using Geographic Information System (CIS) for the Dengue Mitigation Process. [Final Year Project] (Unpublished)

Azlan Bin Mohamed Adnan, Azlan (2008) Computer Aided Reverse Engineering with Renishaw Digitizer for Digitization and Mazak for Model Fabrication. [Final Year Project] (Unpublished)

Azri Izwan Bin Mazlan, Azri Izwan (2008) Characterization and Properties of Copper and Carbon Powders Mixture. [Final Year Project] (Unpublished)

Ahmad Zamani Masnizam Bin Abdullah Zawawi, Ahmad Zamani Masnizam (2008) Study of the Effects of Flame Perturbation by High-Speed Schlieren Imaging. [Final Year Project] (Unpublished)

Abdul Rahman Bin Abdul Halim Koh, Abdul Rahman (2008) Failure Investigation of a Steel Pipe. [Final Year Project] (Unpublished)

Amir Afiz Bin Mohamed Nizan, Amir Afiz (2008) Human Transporter(E-Porter). [Final Year Project] (Unpublished)

Agung Dewandaru, Agung (2008) A Map-matching Algorithm to Improve Vehicle Tracking Systems Accuracy. [Final Year Project] (Unpublished)

Ammar Bin Azhar, Ammar (2008) Design Of A Finger Trainer Prototype For Paralyzed/Stroke Patients. [Final Year Project] (Unpublished)

ABDUL KARIM, NASHRUL IZZUAN (2008) Removal of Dissolved Reactive Red Dye from Aqueous Solution by Coconut Coir Carbon. [Final Year Project] (Unpublished)

ABDALLA EL-KHALIF A, ABUBAKR ELAMIN (2008) RESPONSES OF CLASSIC SPAR PLATFORM SUBJECTED TO REGULAR WAVES. [Final Year Project] (Unpublished)

AHMAD ASTOR, AMIR (2008) Solar Photocatalytic Treatment of Pharmaceutical Wastewater. [Final Year Project] (Unpublished)

Alunad Azaldin, Mohd Amirul Farez (2008) The Usage of Copper Slag in Bituminous Mix. [Final Year Project] (Unpublished)

AWl, AZREE AZHAR (2008) STUDY OF CONCRETE FRACTURE SIMULATION USING ANSYS. [Final Year Project] (Unpublished)

ABDUL MALEK, NOR HAFIZAH (2008) ULTRASOUND AIR BUBBLE DETECTOR FOR MOVING BLOOD (ARTIFICIAL KIDNEY APPLICATION). [Final Year Project] (Unpublished)

ARIFUDDIN, MUHAMMAD NAZRI (2008) DESIGN AND IMPLEMENTATION OF UNMANNED GROUND VEHICLE (MOVEMENT CONTROL). [Final Year Project] (Unpublished)

B

Balqis Binti Subki, Balqis (2008) Lighting Energy Audit in New Academic Buildings of Universiti Teknologi PETRONAS. [Final Year Project] (Unpublished)

Bahrom, Mohd Rasydan (2008) EFFECT OF WATER DEPTH ON THE BEHAVIOUR OF SPAR PLATFORM. [Final Year Project] (Unpublished)

Besar, Mohd Firdaus (2008) COz Corrosion Stndy by Electrochemical Impedance Spectroscopy (EIS) and Linear Polarization Resistance (LPR). [Final Year Project] (Unpublished)

Baharuddin, Halif Rizuan (2008) Mobile University Notification System Using Jabber Protocol. [Final Year Project] (Unpublished)

Batool, Nazr e (2008) Markov-Gibbs Random Field Approach for Modeling of Skin Surface Textures. [Final Year Project] (Unpublished)

BEZIRGENOVICH, NURAHMET TONNIYEV (2008) ELECTRONIC THROTTLE CONTROL. [Final Year Project] (Unpublished)

C

Chai , Set Lee (2008) Use of Magnetic Field in Paraffin Wax Deposition Control for Surface Facilities. [Final Year Project] (Unpublished)

Che Mohd Nasir, Muhammad Za'im Zaki (2008) Solid Waste Management System in UTP Academic Complex. [Final Year Project] (Unpublished)

CHE MANSHOR, MAGHF ARAH (2008) Design and Development of mould of UTP souvenir photo frame using Rapid Prototyping and Rapid Tooling technique. [Final Year Project] (Unpublished)

Che. Azmi, Mohd. Rashdan (2008) THE IMPLEMENTATION OF MS ISO 9001:2000 QUALITY MANAGEMENT SYSTEM WITHIN CONSTRUCTION INDUSTRY IN MALAYSIA. [Final Year Project] (Unpublished)

Che Rawi, Muhammad Afifi (2008) Removal of Heavy Metal from Aqueous Solutions using Ground Water Treatment Plant Sludge. [Final Year Project] (Unpublished)

Chandio, Adnan Iqbal (2008) Asset Remaining Life Cycle Assessment (ARLCA). [Final Year Project] (Unpublished)

Che Jamil, Mas Elina (2008) Effect of Rice Husk Ash (RHA) on the Compressibility of Soil in Changkat Chermin, Perak. [Final Year Project] (Unpublished)

CHHY , SOMNADY (2008) Mobile Tour Assistant. [Final Year Project] (Unpublished)

CHE KU SALIM, CHE KU 'ADLAN (2008) AN AQUATIC QUALITY AUTOMATION SYSTEM (AQAS). [Final Year Project] (Unpublished)

D

Do Kim Dieu, Do Kim (2008) Development of AJAX – Based Inverse Auction Website. [Final Year Project] (Unpublished)

Darail, Nuraini (2008) Spatial Variability of Soil pH and Phosphorus Content at UTP Campus. [Final Year Project] (Unpublished)

Dzulkifli, Muhammad Nazri (2008) AERODYNAMIC CHANGES WHEN TWO VEHICLES ARE IN PROXIMITY TO EACH OTHER. [Final Year Project] (Unpublished)

E

Ee, TeikMun (2008) Pilot Study on Laminated Tooling with Implementation of Conformal Channel. [Final Year Project] (Unpublished)

Ebrahimi, Seyed Mohammad (2008) AJAX ONLINE PHOTO EDITING APPLICATION. [Final Year Project] (Unpublished)

Emier Helmee Md Dewa, Emier Helmee (2008) Redesign and Fabrication of a Mechanical Seal for Pumps. [Final Year Project] (Unpublished)

F

Fauzi, Faiz Hafzan (2008) Adsorption of Copper, Zinc and Iron using Microwave Incinerated Rice Husk Ash (MIRHA) Columns. [Final Year Project] (Unpublished)

G

Gulwa, Mzolisi (2008) Management and Processing of Waste Generated In UTP Cafeterias. [Final Year Project] (Unpublished)

GANI, REGINA (2008) WA VELET-DCT BASED IMAGE CODER FOR VIDEO CODING APPLICATIONS. [Final Year Project] (Unpublished)

H

Hilman Syazwan bin Shukor, Hilman Syazwan (2008) Validation Tool for E-government Portals in Malaysia Based on MAMPU Guideline. [Final Year Project] (Unpublished)

Huei, Dee Boon (2008) Design and Fabrication of a Lab Scale Thermal Energy Storage in Ice. [Final Year Project] (Unpublished)

Hidzir, Hazwani (2008) Digital Terrain Modelling With Total Station for Certain Engineering Purposes. [Final Year Project] (Unpublished)

Harun, Firdaus (2008) Fitness-for-Service Assessment for Pressurized Components with Geometric Distortion. [Final Year Project] (Unpublished)

HEMCHI, THA WEESAK (2008) Thermal Stress and Thermal Expansion in a brake drum of heavy commercial truck. [Final Year Project] (Unpublished)

Hamat, Mohd Eazaq Farommi (2008) Evaporative Cooler As an Air Inlet Treatment Of Gas Turbine. [Final Year Project] (Unpublished)

HAMIDON, FATIMAH ZAHARAH (2008) GATE DRIVER CIRCUIT DESIGN FOR HIGH FREQUENCY SWITCH. [Final Year Project] (Unpublished)

Hii, Jun Yew (2008) Polymer-Clay Microcrystalline Composites:Identification of Unique Mechanical Properties. [Final Year Project] (Unpublished)

Hamedzadeh, Amirl-lossein (2008) Dynamic Analysis of semi-Submersible in Time Domain. [Final Year Project] (Unpublished)

Hasan, Noreta (2008) Effect of Rice Husk Ash on Shear Strength of Soil in Changkat Chermin, Perak. [Final Year Project] (Unpublished)

Hassan Jamil, Roshida (2008) Design ofExperiment on Ultra Violet Curing Die Attach Filmby Using Taguchi Method to Optimize Quality. [Final Year Project] (Unpublished)

Hamdani, Hazrina Yusof (2008) Gene Prediction System ·. [Final Year Project] (Unpublished)

Hassan, Muhamad Firdaus (2008) MOBILE SIGN TO VOICE (MS2V). [Final Year Project] (Unpublished)

Hussin, Muhammad Saufi (2008) Personal Document Management System. [Final Year Project] (Unpublished)

Ho , Sir Wee Lee (2008) Study on Corrosion Inhibitor Availability. [Final Year Project] (Unpublished)

Hafifi bin Mohd Yusop, Hafifi (2008) Modeling and Analysis of Disc Brake Performance. [Final Year Project] (Unpublished)

Hasmi Saifuddin Bin Sebi @ Hasbi, Hasmi Saifuddin (2008) The Use of Marine Sand in Bituminous Mixer. [Final Year Project] (Unpublished)

HALLIYEV, SERDAR (2008) RELATIVE PERMEABILITY HYSTERESIS. [Final Year Project] (Unpublished)

Hassan, Cik Suhana (2008) Stress Analysis of Steam-Methane Reformer Tube. [Final Year Project] (Unpublished)

HUSSIN, HAFFIZ (2008) ULTRA HIGH STRENGTH CONCRETE. [Final Year Project] (Unpublished)

HARUN, NURUL 'AIN (2008) THE EFFECT OF CARBON DIOXIDE AND STEAM IN STRENGTH OF MODIFIED TRONOH'S MINING SAND USING QUICKLIME. [Final Year Project] (Unpublished)

HAMZAH, MOHD ZULKIFLI (2008) HEAT AND RAIN DETECTION SYSTEM FOR POWER WINDOW IN VEHICLE. [Final Year Project] (Unpublished)

I

Irwan Syah Bin Mohd Yasin, Irwan Syah (2008) Design and Fabrication of Hybrid Solar-Biomass System for Crops Drying. [Final Year Project] (Unpublished)

Ismail , Mohd Fadhlan (2008) Stress Concentration Factors at Two Radial Adjacent Nozzle-Header Connections of a Cylindrical Pressure Vessel. [Final Year Project] (Unpublished)

Ismail, Asma Farah (2008) The Effectiveness of Vegetative Swale on Surface Runoff at Construction Sites. [Final Year Project] (Unpublished)

Iskandar, Nadia Amena (2008) Treatment of Landfill Leachate using Groundwater Treatment Plant Sludge. [Final Year Project] (Unpublished)

Ismail, Mohd Sallehhudin (2008) Economic Dispatch In Power System. [Final Year Project] (Unpublished)

ISMAIL, AZNAN (2008) Concrete Filled Steel Tubes (CFST). [Final Year Project] (Unpublished)

Ismail, Fatihah (2008) INDUSTRIALIZED BUILDING SYSTEM: SYSTEM FORMWORK. [Final Year Project] (Unpublished)

Ismail@Ab Aziz, Naguib Mahfuz (2008) PETROCHEMICALS PRODUCT INVENTORY SYSTEM. [Final Year Project] (Unpublished)

Ikmal Hisyam Bin Mubarak, Ikmal Hisyam (2008) Computer Tools in Construction. [Final Year Project] (Unpublished)

Izzat Amin Bin Mohd Yazid, Izzat Amin (2008) The Effect of High Strength Concrete by using Silica Fume and Used Engine Oil as Additive. [Final Year Project] (Unpublished)

IBRAHIM, MUHAMMAD AZHAR (2008) Structural Strength Performance of Carbon Fiber Reinforced Polymer on High Strength Concrete Beam. [Final Year Project] (Unpublished)

J

Johan, Ii Ayuni (2008) The Effect of Different Filler Materials and Gradation on Rutting and Cracking of Bituminous Mixture. [Final Year Project] (Unpublished)

Jamaludin, Mazhar Azrin (2008) Wall Climbing Robot. [Final Year Project] (Unpublished)

Juing, Josephson (2008) Cross-section Strength of Hot-rolled Steel. [Final Year Project] (Unpublished)

Jusoh, Mohd Fadzzrul (2008) Wireless Electric Concept and Application in a Living Room. [Final Year Project] (Unpublished)

Jamalulalam, Mohammad Afshar (2008) Automated Attendance System using Active RFID. [Final Year Project] (Unpublished)

Johan, Nadathul Shima (2008) M-Commerce with MMS Receipt. [Final Year Project] (Unpublished)

Jamaludin, Amril Hadri (2008) Effects of Polyvinyl Alcohol (PV A) in the Compressive Fatigue Strength of Concrete. [Final Year Project] (Unpublished)

John Edan, Shirlene Meredith (2008) DECISION-MAKING VISUALISATION APPUCATION BASED ON ARGUMENT-AS METAPHOR. [Final Year Project] (Unpublished)

Jamaludin, Nur Syahadah (2008) Fabrication of Pinion Gear for Power Window of a Car through Powder Metallurgy Technique. [Final Year Project] (Unpublished)

JAFFAR, HAZERINA (2008) DOMESTIC GA$ MONITORING DEVICE. [Final Year Project] (Unpublished)

K

Kassim, Siti Rokayah (2008) UTP Student Satisfaction Index Survey 2008. [Final Year Project] (Unpublished)

Kamarul Bahrin B. Mohd Kamil, Kamarul Bahrin (2008) Temperature Distribution on a Car Disc Brake. [Final Year Project] (Unpublished)

Khairuldin, Putri Sarah Aainaa (2008) Coagulation-Clarification of Coloured Water Using Natural Coagulant (Moringa oleifera). [Final Year Project] (Unpublished)

Kum, Chee Mun (2008) Design of Multi-Cavity Injection Mold for Tensile and Flexural Test Specimens. [Final Year Project] (Unpublished)

Kusmaniirat, Mohd Khusyairi (2008) ESTIMATION OF FLASH FLOOD PROPERTIES DAMAGE BY USING GIS SPATIAL ANALYSIS. [Final Year Project] (Unpublished)

Kamaruddin, Mohd Fadzrizal (2008) Image, File & Knowledge (IFK) Manager. [Final Year Project] (Unpublished)

Kimin, Mohd Azrul Amin (2008) PRELIMINARY DESIGN OF PALM Oil. FROND GASIFIIm. [Final Year Project] (Unpublished)

Kong, Chai Chen (2008) The Study of Flow Characteristic in the Riser Pipe from the Subsea Wellhead to Kikeh FPSO. [Final Year Project] (Unpublished)

Kehing, Adeline Ervity (2008) Wave Attenuation by Floating Breakwater. [Final Year Project] (Unpublished)

Kamaruzaman, Aizat (2008) Web-Based Practical Exam Monitoring System (WPEMS). [Final Year Project] (Unpublished)

Kum , Chee Mun (2008) Design of Multi-Cavity Injection Mold for Tensile and Flexural Test Specimens. [Final Year Project] (Unpublished)

Kong , Chai Chen (2008) The Study of Flow Characteristic in the Riser Pipe from the Subsea Wellhead to Kikeh FPSO. [Final Year Project] (Unpublished)

Khalid, Nurul Ilmi (2008) Feedback Control System Design for High Frequency Converter. [Final Year Project] (Unpublished)

KAMARUDIN, MUHAMMAD HAZWAN (2008) LANDSLIDE RISK ZONING THROUGH REMOTE REMOTE SENSING AND GIS. [Final Year Project] (Unpublished)

KOH , MINGHAO (2008) WIMAX TESTBED. [Final Year Project] (Unpublished)

KERMANY, ATIEH RANIDAR (2008) A STUDY OF MRF CMOS CIRCUIT DESIGN IMPLEMENTATION. [Final Year Project] (Unpublished)

L

Leong, Song Seng (2008) Customizing Prosthetic Leg Socket by using Rapid Prototype with Reverse Engineering. [Final Year Project] (Unpublished)

Longwa Milia, Richard Lado (2008) OPTIMIZATION OF. DRILLING HYDRAULICS IN VERTICAL HOLES. [Final Year Project] (Unpublished)

Lee , Kee Foo (2008) Speed Analysis along Ipoh-Lumut Highway. [Final Year Project] (Unpublished)

Lee , Hui Yieng (2008) Suitability Analysis of Subsea Pipeline Route using GIS. [Final Year Project] (Unpublished)

LEONG, KHAI SIANG (2008) Drilling Fluid Loss Control By Using Oil Palm Fibres. [Final Year Project] (Unpublished)

Le , Bang Duc (2008) Designing Omni-Directional Mobile Robot Platform for Research. [Final Year Project] (Unpublished)

M

Mohd Izwan Hadi b. Ismail @ Mansor, Mohd Izwan Hadi (2008) Parametric Study on Passive Suspension of Light Rail Vehicle (LRV). [Final Year Project] (Unpublished)

Mohd Izwan Hadi b. Ismail @ Mansor, Mohd Izwan (2008) Parametric Study on Passive Suspension of Light Rail Vehicle (LRV). [Final Year Project] (Unpublished)

Marjono, Nurulain (2008) Determination of Stress Intensity Factor for Arc-shaped Tension Specimen by Using Finite Element Analysis. [Final Year Project] (Unpublished)

Mazlan, Azri Izwan (2008) Characterization and Properties of Copper and Carbon Powders Mixture. [Final Year Project] (Unpublished)

Mohd Roslan, Nur Adilawati (2008) THE EFFECT OF ROAD HUMPS AND RAISED CROSSWALKS ON VEIDCLES SPEED. [Final Year Project] (Unpublished)

Mohd Faizal Din Chan, Mohd Naquib (2008) Vibration Isolation of Floating Raft System. [Final Year Project] (Unpublished)

Md Yusof, Mohd Norzahidi (2008) Design and Development ofClothes Drying Closet Using Solar Energy. [Final Year Project] (Unpublished)

Mohd Yasin, Irwan Syah (2008) Design andFabrication ofHybrid Solar-Biomass System for Crops Drying. [Final Year Project] (Unpublished)

Mohamed Nizan, Amir Afiz (2008) HUMAN TRANSPORTER (E-Porter). [Final Year Project] (Unpublished)

Muhamad Nasrah, Nur Syazni (2008) State Variable Feedbaek Control of a Gantry Crane. [Final Year Project] (Unpublished)

MOHD. YUSOFF, AHMAD SYAUFIK (2008) Bio-ethanol Fuel Study on Spray Characterization Using High Speed Digital Camera. [Final Year Project] (Unpublished)

Mohd Ali, Munirah (2008) Design & Development of Lab Scale Latent Heat Energy Storage Equipment using Paraffin Wax. [Final Year Project] (Unpublished)

Mohd Shukri Bin Mohd Nor, Mohd Shukri (2008) Material Compability and Fuel Properties for E10 and E85. [Final Year Project] (Unpublished)

Mohd Kamal Aizat Bin Ahmad, Mohd Kamal (2008) Development of Decision Support System for Corrosion under Insulation (CUI) for Austenitic Stainless Steels and Carbon Steels. [Final Year Project] (Unpublished)

Mohd Hafiz bin Amran, Mohd Hafiz (2008) Investigation on Savonius Wind Turbine in Directed Flow. [Final Year Project] (Unpublished)

Mohd Naim B. Ruslan, Mohd Naim (2008) Microbiological Influence Corrosion Study on Offshore pipelines. [Final Year Project] (Unpublished)

Mohd Izwan Hadi b. Ismail @ Mansor, Mohd Izwan (2008) Parametric Study on Passive Suspension of Light Rail Vehicle (LRV). [Final Year Project] (Unpublished)

Muhd Zulhafriz Aadel bin Marzuki, Muhd Zulhafriz (2008) Building an Algorithm for Measuring C Programming Assignments Quality. [Final Year Project] (Unpublished)

Mohd Fadhlan bin Ismail, Mohd Fadhlan (2008) Stress Concentration Factors at Two Radial Adjacent Nozzle-Header Connections of a Cylindrical Pressure Vessel. [Final Year Project] (Unpublished)

Mohamad, Syamimi (2008) E-Handrawn Calculator. [Final Year Project] (Unpublished)

Mohd Zin, Nur Azimah (2008) Effect of Mooring Lines on the Responses of Spar Platforms. [Final Year Project] (Unpublished)

MOHD KHALID, MOHD AZIM (2008) Effect of Water Depth on the Behaviour of Triangular Tension Leg Platform (TLP). [Final Year Project] (Unpublished)

Md Yunus, Yusheila (2008) Hybrid Solar Dryer with Biomass Integration. [Final Year Project] (Unpublished)

MOHD YUSOFF, HAIRUL AKMAL (2008) In-situ Chlorine Generation for Water Disinfection. [Final Year Project] (Unpublished)

Md Jaedan, Mohd Sahrul (2008) OPTIMIZATION OF CATHODE WASTE MATERIALS ON EPOXY BASED CONDUCTIVE PAINT PROPERTIES. [Final Year Project] (Unpublished)

Mohd Hosni, Mohammad Nurhafizi (2008) Performance of Bituminous Mix based on Aggregate Packing. [Final Year Project] (Unpublished)

Mohd Hizan, Harez (2008) Soil Stabilisation Using Rice Husk Ash (RHA) in Marine Clay. [Final Year Project] (Unpublished)

Mohd Yusof, Farhan Iqbal (2008) Treatment and Stabilisation of Groundwater Treatment Plant Sludge using Electroosmosis. [Final Year Project] (Unpublished)

Md Din, Mohd Hazwan (2008) Study on Automotive Driveline System with Torque Converter Clutch under Harmonically Varying Normal Load. [Final Year Project] (Unpublished)

Mat Shayuti, Muhammad Shafiq (2008) The Effect of High Temperature on Styrene Monomer Migration from Polystyrene. [Final Year Project] (Unpublished)

Mokhtar, Zainur Azwin (2008) ANALYSIS ON CHARACTERISTIC OF SABAH BENTONITE AT IDGH TEMPERATURE UNDER DYNAMIC CONDffiON. [Final Year Project] (Unpublished)

Mohd Daud, Nasrul Hakim (2008) The Performance of used engine oil on high strength concrete : A Structural Behaviour of Reinforced Concrete Elements Under Static Loading. [Final Year Project] (Unpublished)

Mustapha, Syazana (2008) Vermicomposting of Yard Waste and Shredded Paper by Eisenia Foetida. [Final Year Project] (Unpublished)

Megat Shahair, Megat Atif (2008) Application ofWeibull Probability to Predict the Size of Inclusion in Metallic Material. [Final Year Project] (Unpublished)

Mokhtar, Muhammad Hanif (2008) Blog As a Learning Tool: UTP Perspective. [Final Year Project] (Unpublished)

Mat Nasir, Mohamad Faiz (2008) Cavitation Failure of Local Made Propellers and Suggestion for Improvement. [Final Year Project] (Unpublished)

Mohammad Hatta, Mohammad Asyraf (2008) Engine Testing of Gasoline, ES, ElO, E15 and E20 Ethanol Blends. [Final Year Project] (Unpublished)

Mohd Yusop, Hafifi (2008) MODELING AND ANALYSIS OF DISC BRAKE PERFORMANCE. [Final Year Project] (Unpublished)

Mohamad Noor, Mohd Ruzaini (2008) Optimizing Heat Insulation of a Solar Oven. [Final Year Project] (Unpublished)

Meohan@ Ashaari, Mohd Annan (2008) Flood Problem at Junction Kg. Sentang : It causes and the Engineering Solutions. [Final Year Project] (Unpublished)

Mohd Yunus, Mohd Zulfadli (2008) Risk Based Inspection on Gas Processing Plant. [Final Year Project] (Unpublished)

Mohd Sobli, Mohd Akmal (2008) Spray Characteristic by using Phase Doppler Aiiemometry (PDA) and Laser Doppler Anemomctry (LDV). [Final Year Project] (Unpublished)

Mat Salleh, Siti Nur Hidayah (2008) The Effect of Multiple-use of Polystyrene Cups on Styrene Monomer Migration. [Final Year Project] (Unpublished)

Mohd Idrus, Nadirah (2008) COMMUNITY MOBILE SERVICES (FYP PROJECT FOR 2 SEMESTERS). [Final Year Project] (Unpublished)

Mohd Eazaq Farommi Bin Hamat, Mohd Eazaq (2008) Evaporative Cooler As an Air Inlet Treatment Of Gas Turbine. [Final Year Project] (Unpublished)

Muhamad Afiq Bin Ahmad, Muhamad Afiq (2008) Gas Turbine Efficiency Improvement at Centralised Utility Facilities (CUF) Kertih, Terengganu. [Final Year Project] (Unpublished)

Mohd Yusoff, Mohd Fareez (2008) Analysis ofHigb Frequency Transformer Design in Converter Application. [Final Year Project] (Unpublished)

MOHAMMAD, MARLIANA (2008) DESIGN-FOR-TESTABILITY (DFT) TECHNIQUE FOR OPEN FAULTS IN CMOS LATCH/FLIP-FLOP. [Final Year Project] (Unpublished)

Mohamed Sirat, Mahfuza (2008) Designing Security System using MyKad. [Final Year Project] (Unpublished)

MARZAN, NURUL ATIKAH (2008) INSTRUMENTATION FAULT SIMULATION TRAINING MODULE (FAST.tool). [Final Year Project] (Unpublished)

Muhamad, Marni (2008) Metered Multi-Moisture Detector. [Final Year Project] (Unpublished)

MOHD SAPLI, NUR SY AHADAH (2008) Comparitive Study On Multiplier Algorithms using Verilog HDL. [Final Year Project] (Unpublished)

Muhammad Adib , Muhammad Syazwan (2008) Design and Simulate Radio Frequency (RF) CMOS Mixer Circuit. [Final Year Project] (Unpublished)

Mathews, Praveen Manaprath (2008) USB Learning Module. [Final Year Project] (Unpublished)

MOHD DAUD, NURUL SHAIDATUL SHIMA (2008) IMPLEMENTATION OF RFID AS AN ATTENDANCE RECORDING AND TRACKING SYSTEM IN UTP (Time Track). [Final Year Project] (Unpublished)

MAT DAUD, NURHIDAYATI (2008) LEAD AND CADMIUM REMOVAL FROM AQUEOUS SOLUTION USING GROUNDWATER TREATMENT PLANT SLUDGE. [Final Year Project] (Unpublished)

MOHD NOR@ ABDULLAH, MOHO FARIZ IKRAM (2008) FLOOD PROTECTION GARAGE SYSTEM. [Final Year Project] (Unpublished)

Mohd Safian, Bari' Asyraf (2008) Implementation of Computer Control in Control Loop Process. [Final Year Project] (Unpublished)

MOHAMAD RAFIUDDIN, MOHAMAD LOKMAN (2008) IMPLEMENTATION OF MICROCONTROLLER TO THE CONTROL OF AN AGV. [Final Year Project] (Unpublished)

Mokhtar, Mohd Shahadan (2008) Distributed Personal Authentication Systems (DP AS). [Final Year Project] (Unpublished)

MOHAMED HASSAN, MOHAMED GHAUTH (2008) NETWORK ACTIVITY AUDITING USING LINUX RUNNING OFF A LOOPBACK ROOT FILESYSTEM. [Final Year Project] (Unpublished)

MOHAMED, FARALIZA (2008) PET ROBOT. [Final Year Project] (Unpublished)

Mohd Fauzie, Noor Atikah (2008) Modeling and Simulation of Robots Playing Football using MA TLAB/SIMULINK. [Final Year Project] (Unpublished)

MAHMUD, MUHAMMAD AZHARUDDIN (2008) STUDY OF LOW VOLTAGE DISTRIBUTION SYSTEM IN BLOCK 5, UTP. [Final Year Project] (Unpublished)

MUHAMAD SHUKRI, NURUL AKMAL (2008) MICROCONTROLLER BASED LAPTOP COOLING SYSTEM. [Final Year Project] (Unpublished)

Mohammed Ibrahim, Husam Eldeen (2008) UTILIZATION OF SOLAR ENERGY FOR COOLING. [Final Year Project] (Unpublished)

Masa Alogo Bindang, Manuel (2008) Investigation of the Environmental Effects on Adhesives Bonded Joints. [Final Year Project] (Unpublished)

Muhd Hafiz B Hilmi, Muhd Hafiz (2008) The Study of Linear Elastic Fracture Mechanics (LEFM) in Fracture. [Final Year Project] (Unpublished)

Mohd Azrul Amin B Kimin, Mohd Azrul Amin (2008) Preliminary Design Of Palm Oil Frond Gasifier. [Final Year Project] (Unpublished)

Muhammad Fahmi Bin Mustafa, Muhammad Fahmi (2008) A Study of Pressure Surge Effects on Transportation Pipeline. [Final Year Project] (Unpublished)

Mohd Alif Syazwan bin Mohd Nasir, Mohd Alif Syazwan (2008) Experimental Modelling of the Fluid Flow in a Furnace Top of an Ethane Cracker in EPEMSB, Paka. [Final Year Project] (Unpublished)

Muhamad Farizuddin Anwar bin Mansor, Muhamad Farizuddin (2008) Design Of A Cathodic Protection Against Corrosion For Marine And Offshore Structure. [Final Year Project] (Unpublished)

Muhammad Naim bin Ariffin, Muhammad Naim (2008) Design of a New Centrifugal Pump Impeller. [Final Year Project] (Unpublished)

Mohd Taufek Bin Tumali, Mohd Taufek (2008) Design Of Freewheel Coupling. [Final Year Project] (Unpublished)

Mujtahid bin Mohd Abidin, Mujtahid (2008) An Investigation on the Effects of an Intake Air-Swirl Device on Fuel Consumption of a Spark Ignition Engine. [Final Year Project] (Unpublished)

Muhammad Ikhbar B. Md Ismail, Muhammad Ikhbar (2008) Effect of Performance of A DC Motor by Replacing Ferrite Magnet with Melt Spun NdFeB Magnet. [Final Year Project] (Unpublished)

Muhammad Farid Bin Abdullah, Muhammad Farid (2008) Study and Design of Compressed Air System for Optimum Operation. [Final Year Project] (Unpublished)

Mohd Ubaidillah bin Mohd Kamal, Mohd Ubaidillah (2008) Design of A Ballast Tank For A Small Underwater Remotely Operated Vehicle (ROV). [Final Year Project] (Unpublished)

Mohd Fasya b. Ramsah, Mohd Fasya (2008) Characterization and Properties of Nickel Powder and Carbon Powder Mixture. [Final Year Project] (Unpublished)

MUHAMMAD KHAIRIL ANUAR BIN MOKHTAR, MUHAMMAD KHAIRIL (2008) DESIGN AND DEVELOPMENT OF A SOLAR COOKER. [Final Year Project] (Unpublished)

Mohamad, Mazila (2008) Dynamic Behaviour of Reinforced Concrete (RC) Beam Made of Self Compacting Concrete (SCC) by Using Pulverized Fuel Ash (PFA) and Rice Husk Ash (RHA) As an Additive. [Final Year Project] (Unpublished)

Monsarif, Mohd Iqbal Farid (2008) High Tensile Strength Concrete. [Final Year Project] (Unpublished)

MARZAN, NURUL ATIKAH (2008) INSTRUMENTATION FAULT SIMULATION TRAINING MODULE (FAST.tool). [Final Year Project] (Unpublished)

Mohd Hanifa, Hazlinda (2008) Offshore Pipeline Free Spanning Analysis Based On DNV Design Code. [Final Year Project] (Unpublished)

Mohamed Rahim, Nur Aqilah (2008) Pile Selection Methodology. [Final Year Project] (Unpublished)

Mohd Sazali, Hannis Salwani (2008) Responses of Square Tension Leg Platform Subjected To Regular Wave. [Final Year Project] (Unpublished)

Mohd Kabri, Mohd Juzaili (2008) Usage oflron Sludge As Filler in ACWC 20 Mix. [Final Year Project] (Unpublished)

Muhamad Jani, Aizat (2008) ADSORPTIVE REMOVAL OF TEXTILE DYES (CIBACRON YELLOW CSG) FROM AQUEOUS SOLUTION BY COCONUT COIR CARBON. [Final Year Project] (Unpublished)

Md Yunus, Yusra Mazliza (2008) Comparison between Effect of Lime and Rice Husk Ash on California Bearing Ratio on Soil in Changkat Chermin. [Final Year Project] (Unpublished)

Mokhtar, Mohd Zulhilmi (2008) Effect of Non-Ground Copper Slag on Properties of Concrete. [Final Year Project] (Unpublished)

Mior Husain, Mior Ahmad Faizal (2008) TENSILE FATIGUE OF CONCRETE Wim POLYVINYL ALCOHOL. [Final Year Project] (Unpublished)

Mohd Zim, Mohd Audi Ashraaf (2008) Responses of Triangular Tension Leg Platform Subjected to Random Waves. [Final Year Project] (Unpublished)

Masduki, Saiful Khafiz (2008) (MOD) Mobile Obstacle Detector for Blind People. [Final Year Project] (Unpublished)

Mohd Yusof, Nurul Ain (2008) Ajax Based T-Shirt Customization Using OSS. [Final Year Project] (Unpublished)

Mohd Nor, Zatul Iffah (2008) Alternative Solution to Sand Blanket in Vertical Drain. [Final Year Project] (Unpublished)

Muhd Khiyar, Nur Zeenaida (2008) An Investigation on the Tribological Performance of Carbon nanotube (CNT) as a Lubricant Additive to Locally Made Engine Oil. [Final Year Project] (Unpublished)

Mohd Zainudin, Anis Suria (2008) Arbitrage Detector Alert System. [Final Year Project] (Unpublished)

Mahamad, Sajee (2008) Blind Kcholocation. [Final Year Project] (Unpublished)

Mohd Akhir, Siti Norhanis (2008) Case-Based Menu Planner: Web-Based System. [Final Year Project] (Unpublished)

Mohtar, Mohamad Najib (2008) Developing Carbon Particle Reinforced Alnmininm Composite byPowder Metallurgy. [Final Year Project] (Unpublished)

Mohd Nasir, Mohd Alif Syazwan (2008) Experimental Modelling of the Fluid Flow in a Furnace Top of an Ethane Cracker in EPEMSB, Paka. [Final Year Project] (Unpublished)

Mohd Zain, Ihsan (2008) Fabrication of a Small Scale Model of Chancellor Award Trophy using CAD/CAM and CNC Milling Machine. [Final Year Project] (Unpublished)

Mohd Abd Ghafar, Mohd Afiq (2008) Feasibility Study on Possibility of Using Flare Gas as a Source of Energy. [Final Year Project] (Unpublished)

Mohd Hamdan, Mohd Hadzwan (2008) Implementation of E-Voting System: Case Study for Universiti Teknologi PETRONAS. [Final Year Project] (Unpublished)

Mohd Rakbi, Norfadliana (2008) Interactive Learning System forE-commerce, Technopreneursip. [Final Year Project] (Unpublished)

MASA ALOGO BINDANG, Manuel (2008) Investigation of the Environmental Effect on Adhesive Bonds. [Final Year Project] (Unpublished)

Mohd Hilmi, Amirul Ehsan (2008) MOTION PLANNING ALGORITHM FOR VEHICLE PARKING SIMULATION. [Final Year Project] (Unpublished)

Mohd Omar, Fakrur Radzi (2008) SOLIDIFICATION OF WASTE ACTIVATED SLUDGE FROM PETROLEUM REFINERY. [Final Year Project] (Unpublished)

MOHD SAID, MOHD SHUHAIZI (2008) STUDY ON THE MODULUS OF ELASTICITY & MODULUS OF RUPTURE OF SELF-COMPACTING CONCRETE THAT USE PFA AS ADDITIVES. [Final Year Project] (Unpublished)

Mohamed Wazir, Muhamad Faiz (2008) Quizzes vis Short Message Service. [Final Year Project] (Unpublished)

Md Dewa, Emier Helmee (2008) Redesign and Fabrication of a Mechanical Seal for Pumps. [Final Year Project] (Unpublished)

Mhd Khazar, Muhammad Afiq (2008) Utilization ofCatalyst Waste Moiinex (CWM) in concrete. [Final Year Project] (Unpublished)

Mhd Nasir, Natassya (2008) Yomeiri Xcessories.com. [Final Year Project] (Unpublished)

Mohd Amirul Hakim Bin Sulaiman, Mohd Amirul Hakim (2008) Banana Trunk As A Lost Circulation Material In Hydrocarbon Drilling Fluid. [Final Year Project] (Unpublished)

Mohd Aziman Bin Azemi, Mohd Aziman (2008) Failure Analysis of Heat Exchanger’s Tubes at GPP Kerteh. [Final Year Project] (Unpublished)

Muhammad Shafiq bin Mat Shayuti, Muhammad Shafiq (2008) The Effect of High Temperature on Styrene Monomer Migration from Polystyrene Cup. [Final Year Project] (Unpublished)

Mohd Ruzaini Bin Mohamad Noor, Mohd Ruzaini (2008) Optimizing Heat Insulation of a Solar Oven. [Final Year Project] (Unpublished)

Mohd Zaki Al Hafiz bin Rosli, Mohd Zaki Al Hafiz (2008) Implementation of dust control system using management and planning tools (MPT). [Final Year Project] (Unpublished)

Mohammad Asyraf bin Mohammad Hatta, Mohammad Asyraf (2008) Engine Testing of Gasoline and E5, E10, E15 and E20 Ethanol Blends. [Final Year Project] (Unpublished)

Mohd Fikram Bin Mat Yazid, Mohd Fikram (2008) Development of a Failure Prediction Model for Heat Exchanger Tube. [Final Year Project] (Unpublished)

Mohd Azuan Bin Mohamad Nor, Mohd Azuan (2008) Study And Development Of Pellet Fuel From Oil Palm Frond. [Final Year Project] (Unpublished)

Mohd Fairozlan Bin Ahmad Tarmizi, Mohd Fairozlan (2008) Total Productive Maintenance Assessment on Discrete Manufacturing System. [Final Year Project] (Unpublished)

Mohd Aiman Bin Ismail, Mohd Aiman (2008) Microstructure Characterization of Creep-Tested Reformer Tube Material. [Final Year Project] (Unpublished)

Mohd Khalifa Taufiq Kamaruddin, Mohd Khalifa Taufiq (2008) Emergency Power Supply To Start A Car. [Final Year Project] (Unpublished)

Md Fadhli Helmi B Noor Kamaruzaman, Md Fadhli Helmi (2008) Design of Submerged Wave-Induced Forcing Elements to Power a Linear Generator. [Final Year Project] (Unpublished)

Mohamed Faiz bin Mohamed Amin, Mohamed Faiz (2008) Designing Air Intake System for Engine Performance and Efficiency Optimisation. [Final Year Project] (Unpublished)

Mohamad Najib Bin Mohtar, Mohamad Najib (2008) Developing Carbon Particle Reinforced Aluminium Composite by Powder Metallurgy. [Final Year Project] (Unpublished)

Muhammad Aizuddin bin Zainalabidin, Muhammad Aizuddin (2008) Miscible CO2 Injection: Sensitivity To Fluid Properties Tinggi Field. [Final Year Project] (Unpublished)

Muhammad Bukhari bin Abdul Jalil, Muhammad Bukhari (2008) Freezing Point Depression Method for Hydrate Monitoring. [Final Year Project] (Unpublished)

Mahir Elya El feel Agla, Mahir Elya (2008) Improving Hole Cleaning on High Angle Wells. [Final Year Project] (Unpublished)

Muhammad Thaqif Bin Roslim, Muhammad Thaqif (2008) Experimental Study on Scale Control in Surface Pipelines by Magnetic Descaler. [Final Year Project] (Unpublished)

Megat Atif Bin Megat Shahair, Megat Atif (2008) Application of Weibull Probability to Predict the Size of Inclusion in Metallic Material. [Final Year Project] (Unpublished)

Mohamad Firdaus Bin Ayob, Mohamad Firdaus (2008) Investigation into the Potential of Bio-based Automotive Engine Lubrication Oil Using Tribological Test Method. [Final Year Project] (Unpublished)

Mohd Akmal Bin Mohd Sobli, Mohd Akmal (2008) Spray Characteristic by using Phase Doppler Anemometry (PDA) and Laser Doppler Anemometry (LDV). [Final Year Project] (Unpublished)

Mohammad Zuhairi bin Ramly, Mohammad Zuhairi (2008) The Design and Fabrication of a prototype machine: “asam gelugor” processing machine. [Final Year Project] (Unpublished)

Mohd Nazwan bin Dzulkarnine, Mohd Nazwan (2008) Phased Array: An Alternative of Non Destructive Test Method to Replace Conventional Radiographic Test (RT) and Ultrasonic Test (UT) for Linepipe Inspection. [Final Year Project] (Unpublished)

Mas Elina Binti Che Jamil, Mas Elina (2008) Effect of Rice Husk Ash (RHA) on the Compressibility of Soil in Changkat Chermin, Perak. [Final Year Project] (Unpublished)

Mat Sahnizam Bin Tamat, Mat Sahnizam (2008) Thickening of Municipal Sludge and Treatment of Leachate Using Recycled Ferrous Sulphate (RFS) Extracted from Groundwater Treatment Plant Sludge. [Final Year Project] (Unpublished)

Mohamed Fuad Al Farabi Shazi B Shaarani, Mohamed Fuad Al Farabi Shazi (2008) Design and Implementation of Robofly Wing Flapping Mechanism Using Piezoelectric Crystal. [Final Year Project] (Unpublished)

Mohd Naquib bin Mohd Faizal Din Chan, Mohd Naquib (2008) Vibration Isolation of Floating Raft System. [Final Year Project] (Unpublished)

Mohd Firdaus Rosli, Mohd Firdaus (2008) City Bus Characteristics : Ipoh- Tanjung Rambutan. [Final Year Project] (Unpublished)

Mohd Khusyairi Bin Kusmaniirat, Mohd Khusyairi (2008) Estimation of Flash Flood Properties Damage by Using GIS Spatial Analysis. [Final Year Project] (Unpublished)

Muhammad Zukni Bin Ibrahim, Muhammad Zukni (2008) Design and Analysis of Power Take-Off (PTO) and Telescopic Driveshafts. [Final Year Project] (Unpublished)

MUHAMMAD AQMAL BIN RATASHA, MUHAMMAD AQMAL (2008) Implementation of Risk-Based Inspection on Offshore Facilities. [Final Year Project] (Unpublished)

Mohd Norzahidi Bin Md Yusof, Mohd Norzahidi (2008) Design and Development of Clothes Drying Closet Using Solar Energy. [Final Year Project] (Unpublished)

Mohd Radzi Bin Mohd Anua, Mohd Radzi (2008) Design and Prototyping of Centrifugal Pump Impeller to be used as Water Injection Pump for Hydrocarbon Artificial Lift. [Final Year Project] (Unpublished)

MUHAMMAD NAZRI BIN DZULKIFLI, MUHAMMAD NAZRI (2008) Aerodynamic changes when two Vehicles are in a Proximity to each other. [Final Year Project] (Unpublished)

Mohamad Faiz bin Mat Nasir, Mohamad Faiz (2008) Cavitation Failure of Local Made Propellers and Suggestion for Improvement. [Final Year Project] (Unpublished)

Mohd. Nasrul Bin Mat Yusof, Mohd. Nasrul (2008) Gas Turbine Blade Failure Due To Hot Corrosion. [Final Year Project] (Unpublished)

Mohd Shah Rizal Bin Mohd Yusof, Mohd Shah Rizal (2008) Engine Performance and Exhaust Emission Characteristics of Fuel Oil-Diesel Fuel Mixture in a Single Cylinder Engine. [Final Year Project] (Unpublished)

Muhammad Yusof B. Abd Rahim, Muhammad Yusof (2008) Pressure as an Indicator for Water Breakthrough for Horizontal Well Completion. [Final Year Project] (Unpublished)

Mohamad Amir Ridzwan B Mansor , Mohamad Amir Ridzwan (2008) The Design of Mechanisms for Gantry Crane Experimental Rig. [Final Year Project] (Unpublished)

Mohd Nazri Bin Me, Mohd Nazri (2008) Design of Laboratory Scale Prototype of Hydrothermal Crystallizer. [Final Year Project] (Unpublished)

Mohd Nuh Aizat B Mohd Daut, Mohd Nuh Aizat (2008) CNC Manufacturing of NACA 4412 Wing Sections for Wind Tunnel Test. [Final Year Project] (Unpublished)

Mohd Nurhadi bin Arifin, Mohd Nurhadi (2008) The Investigation into Tribological Properties of Carbon Fiber Reinforced Composite. [Final Year Project] (Unpublished)

MOHD SHAFIQ AHMAD DAHALAN, MOHD SHAFIQ (2008) Extract Motion from Picture Sequence. [Final Year Project] (Unpublished)

Mohd Zikri Bin Ahmad Abustaman, Mohd Zikri (2008) Processing of Alumina Powder into Ceramic Foam Materials by Impregnating Polyurethane Sponge with Bonded Ceramic Slurry. [Final Year Project] (Unpublished)

Muhamad Zainurul Asyraf bin Ismail, Muhamad Zainurul Asyraf (2008) CFD of Viscoelastic Fluid in Horizontal Flow Pipes. [Final Year Project] (Unpublished)

Muhamad Zulhairie bin Moideen, Muhamad Zulhairie (2008) Sway Reduction of Tower Crane. [Final Year Project] (Unpublished)

Muhammad Aizuddin Bin Muaz, Muhammad Aizuddin (2008) Implication of Design and Operation on Cooling Load and Energy Cost for Academic Building At UTP. [Final Year Project] (Unpublished)

Muhammad Bin Roslan, Muhammad (2008) Thermal Characterization of Carbonaceous Pitches from Residue of PETRONAS Refinery. [Final Year Project] (Unpublished)

Muhammad Afiq Bin Mhd Khazar, Muhammad Afiq (2008) Utilization of Catalyst Waste Molinex (CWM) in concrete. [Final Year Project] (Unpublished)

Mohd Shukri Bin Mohd Nor, Mohd Shukri (2008) Material Compatibility And Fuel Properties For E10 And E85. [Final Year Project] (Unpublished)

MOHAMAD SHARIP, NOREEN SY AZLIN (2008) DESIGNING A SENSING UNIT OF A SENSOR NODE. [Final Year Project] (Unpublished)

MOHD RUSSIN, SRI RAHAYU (2008) LEAD AND CADMIUM REMOVAL FROM AQUEOUS SOLUTION USING WASTE MATERIAL (MICROWAVE INCINERATED RICE HUSK ASH). [Final Year Project] (Unpublished)

MOHD RUSSIN, SRI RAHA YU (2008) LEAD AND CADMIUM REMOVAL FROM AQUEOUS SOLUTION USING WASTE MATERIAL (MICROWAVE INCINERATED RICE HUSK ASH). [Final Year Project] (Unpublished)

Memon, Naveed Ahmed (2008) Modeling and simulation of PI-Fuzzy Control on Gas Pilot Plant via Matlab/Simulink and Industrial PC. [Final Year Project] (Unpublished)

MOHD. NURI, NUR DIANA (2008) PERFORMANCE COMPARISON OF NON-INTERLEAVED BCH CODES AND INTERLEAVED BCH CODES. [Final Year Project] (Unpublished)

MOHD NOR, NOR AFIF AH (2008) POWER SYSTEM CONFIGURATION, SHORT CffiCUIT ANALYSIS AND MOTOR STARTING STUDY OF AN OFFSHORE PLATFORM. [Final Year Project] (Unpublished)

MAHA T, MOHD IQBAL HAQIM (2008) RECTENNA DESIGN FOR WIRELESS POWER TRANSMISSION. [Final Year Project] (Unpublished)

Mahamud, Noorhidayah (2008) Spatial variability of soil hydraulic properties at Universiti Teknologi Petronas (UTP). [Final Year Project] (Unpublished)

MOHAMAD AF ANDI, NUR HASYIMAH (2008) STUDY OF ZEOLITE IN MITIGATING FORMATION DAMAGE DUE TO INORGANIC SCALING. [Final Year Project] (Unpublished)

Moktar, Mohammad Faiz (2008) Study on Sintering Behavior of Alumina Particle Reinforced Aluminum Matrix Composites and Its Properties. [Final Year Project] (Unpublished)

MD YUSOFF, NORAIHAN (2008) THE EFFECT OF DIFFERENT AGGREGATE TYPES AND GRADATION ON THE CHARACTERISTICS OF BITUMINOUS MIXTURES. [Final Year Project] (Unpublished)

Mohd Azmi, Farhad (2008) COOLING STORAGE FOR VEHICLES USING THERMOELECTRIC COOLER. [Final Year Project] (Unpublished)

MUHAMAD KAMARUZAMAN, MUHAMAD ZAMRY (2008) DYNAMIC MODELING AND CLOSED-LOOP CONTROL OF A TWIN ROTOR MIMO SYSTEM. [Final Year Project] (Unpublished)

MOHD NOH, MUHAMAD F AHMI (2008) REDUCING COST OF DOMESTIC POWER USAGE BY USING CAPACITOR. [Final Year Project] (Unpublished)

N

Nur Hasyimah Bt Mohamad Afandi, Nur Hasyimah (2008) Study Of Zeolite In Mitigating Formation Damage Due To Inorganic Scaling. [Final Year Project] (Unpublished)

NUR SHAZANA SULAIMAN, NUR SHAZANA (2008) Knowledge Management Portal for Student Industrial Internship Programme. [Final Year Project] (Unpublished)

Ngatini, Maini Rizal (2008) Effects of Fiber Reinforcement in Intumescent Formulations for Char Strengthening. [Final Year Project] (Unpublished)

Nurzaki Bin Ikhsan, Nurzaki (2008) Design and Analysis of a Hybrid Composite-Steel Frame Chassis for a Small Racecar. [Final Year Project] (Unpublished)

Nurazrin binti Ismail, Nurazrin (2008) The Development of UTP Examination Timetabling System (ETS). [Final Year Project] (Unpublished)

Ng, Natasya Jia Weyn (2008) Compression Capacity Prediction of Cold-Formed Steel Sections. [Final Year Project] (Unpublished)

NIK MOHO SHUKRI, NIK MOHD F AKRUL FIDZRIE (2008) DIGITAL TERRAIN MODELING (DTM) WITH RTK GPS FOR CERTAIN ENGINEERING USES. [Final Year Project] (Unpublished)

NGATENAH, SITI NOR IDAYU (2008) NITRATE AND PHOSPHORUS REMOVAL FROM MUNICIPAL WASTEWATER TREATMENT PLANT EFFLUENT USING PHYTOREMEDIATION SITI. [Final Year Project] (Unpublished)

NG , BOON HOCK (2008) WAVE FORCES ON FLOATING BREAKWATER. [Final Year Project] (Unpublished)

Ng, E-Laine (2008) FINGERPRINT RECOGNITION SYSTEM. [Final Year Project] (Unpublished)

Nadiah Mohd Zaki, Nadiah (2008) CFD Simulation of Visco-Elastic Fluids in Vertical Flow Pipes. [Final Year Project] (Unpublished)

Nashreen Mhd Razali, Nashreen (2008) Development of an Analytical Model of Gas Turbine to Predict the Gas Turbine Degradation. [Final Year Project] (Unpublished)

Ng, Chan Wai (2008) Study the Effects of Fluids Dominating Forces on Pseudo Relative Permeability Curve. [Final Year Project] (Unpublished)

Ng, Choon Hing (2008) The Effect of Increased Fuel Intake Temperature on the Performance of Internal Combustion Engines. [Final Year Project] (Unpublished)

Nur Zahirah Binti Zakaria, Nur Zahirah (2008) Predesign of Latent Heat Thermal Energy Storage for UTP GDC System. [Final Year Project] (Unpublished)

Norfadliana bt. Mohd Rakbi, Norfadliana (2008) Interactive Learning System for E-commerce, Technopreneursip. [Final Year Project] (Unpublished)

Nadarajan, Chandrakumar (2008) Effects of Elevated Temperatures on Microwave Incinerated Rice Husk Ash blended Concrete. [Final Year Project] (Unpublished)

Ng, Cheng Yee (2008) Parametric Study for the Critical Tubular Joint of the Jacket Structure. [Final Year Project] (Unpublished)

Nasir, Faerah (2008) Adsorption of Zinc from Water by Coconut Coir Carbon. [Final Year Project] (Unpublished)

Ngadni, Norhidayah (2008) ANALYSIS OF KIKEH TRUSS SPAR SUBJECTED TO REGULAR WAVES. [Final Year Project] (Unpublished)

Ng , Jiun Huei (2008) Comparison between ultimate pilecapacity ofbored piles determine using analytical method, numerical method and pileloadtest along Sentul - Batu Caves Double Track Project. [Final Year Project] (Unpublished)

Ngadni, Norhidayah (2008) ANALYSIS OF KIKEH TRUSS SPAR SUBJECTED TO REGULAR WAVES. [Final Year Project] (Unpublished)

Nurhusna Bt Yusoff , Nurhusna (2008) Design Calculations and Experimental Analysis of “Over Roof Solar Chimney”. [Final Year Project] (Unpublished)

Nurfariza Binti Mohd Zuki, Nurfariza (2008) Reducing Sway of Gantry Crane Load. [Final Year Project] (Unpublished)

Ngo Dinh Phuong, Dinh Phuong (2008) Simulation and Performance Test of CNC Machining Center. [Final Year Project] (Unpublished)

Norafif Afnan Mohd Nordin, Norafif Afnan (2008) Effect of Deformation to the Performance of Aluminium Sacrificial Anode. [Final Year Project] (Unpublished)

Ng, Jiun Heui (2008) Comparison between ultimate pile capacity of bored piles determine using analytical method, numerical method and pile load test along Sentul - Batu Caves Double Track Project. [Final Year Project] (Unpublished)

Nur Saidatul Shida Sahidi, Nur Saidatul Shida (2008) Organic Removal from Fertilizer Wastewater using Biological Treatment. [Final Year Project] (Unpublished)

Naizatul Akmal Binti Abdullah, Naizatul Akmal (2008) Identifying and Handling Black Spot in Transportation Engineering(Batu Gajah-Taman Maju Route). [Final Year Project] (Unpublished)

Nor Asma Rusni Ab. Alim, Nor Asma Rusni (2008) A Study on the Effect of Surface Finish on Corrosion of Carbon Steel in CO2 Environment. [Final Year Project] (Unpublished)

NUR AZURA BINTI KAMARUZZAMAN, NUR AZURA (2008) Wave Energy Eletric Generator. [Final Year Project] (Unpublished)

Nur Syahadah binti Jamaludin, Nur Syahadah (2008) Fabrication of Pinion Gear for PowerWindow of a Car through Powder Metallurgy Technique. [Final Year Project] (Unpublished)

Nur Zeenaida Muhammad Khiyar, Nur Zeenaida (2008) An Investigation on the Tribological Performance of Carbon nanotube(CNT) as a Lubricant Additive to Locally Made Engine Oil. [Final Year Project] (Unpublished)

Nur Syazni binti Muhamad Nasrah, Nur Syazni (2008) State Variable Feedback Control Of A Gantry Crane. [Final Year Project] (Unpublished)

Nurzaki Bin Ikhsan, Nurzaki (2008) Design and Analysis of a Hybrid Composite-Steel Frame Chassis for a Small Racecar. [Final Year Project] (Unpublished)

O

Ong, Chin K wang (2008) Optimization Of Well Location And Number Of Production Well. [Final Year Project] (Unpublished)

Osman, Robeatul Adawiah (2008) The Mechanical Properties ofMIRHA Foamed Concrete. [Final Year Project] (Unpublished)

Omar , Siti Aisyah (2008) Cooperative Control of Dual Series Robots. [Final Year Project] (Unpublished)

Omar, Abdul Aziz (2008) E-Court Management System for Mahkamah Sesyen and Magistrate lpoh. [Final Year Project] (Unpublished)

Othman, Mohd Bazli (2008) Road Surveyor System Prototype. [Final Year Project] (Unpublished)

Othman Siru, Abdul Rahim (2008) Applying Information System in Healthcare Organization: A Case Study in Small and Medium Sizes of Clinics. [Final Year Project] (Unpublished)

Othman, Nor Diana (2008) Feasibility Study ofThickness Measurement System. [Final Year Project] (Unpublished)

P

PENJIYEV, AZAT (2008) APPLICATION OF FACTS DEVICES IN POWER SYSTEMS. [Final Year Project] (Unpublished)

R

Rosdi, Syarizatul Nadia (2008) Application of Solar Energy in Drying Pepper. [Final Year Project] (Unpublished)

Ramly, Mohammad Zuhairi (2008) The Design and Fabrication of a prototype machine: "asam gelugor" processing machine. [Final Year Project] (Unpublished)

RAHMAN, ARIEF (2008) Agent-Based Simulation and Analysis of Human Behavior towards Evacuation Time Reduction. [Final Year Project] (Unpublished)

Rahiman, Raieza Hanim (2008) Investigation on Lost Circulation Materials (LCM) Derived From Dorian Peel Waste For Drilling Fluid Formulation. [Final Year Project] (Unpublished)

Rosli, Mohd Zaki AI Hafiz (2008) Mnltitask Anti-Dust Cleaner. [Final Year Project] (Unpublished)

Ramlan , Mohd Affendi (2008) Pull Out Tension Capacity of Self Compacting Concrete Containing Rice Husk Ash. [Final Year Project] (Unpublished)

Ramli, Mohd Raizullan (2008) Trip Generation Equation for Primary School. [Final Year Project] (Unpublished)

Roslim, Muhammad Thaqif (2008) Experimental Study on Scale Control in Surface Pipelines by Magnetic Descaler. [Final Year Project] (Unpublished)

RAMLI, KHAlRUL.IKHWAN (2008) RFID SIMULATION IN MATLAB I SIMULINK. [Final Year Project] (Unpublished)

Razali, Amir Fadhli (2008) Monitoring the Dengue Population/Breeding ground using Geographie Information System (GIS) for the Dengue Mitigation Process. [Final Year Project] (Unpublished)

ROSHIDA HASSAN JAMIL, ROSHIDA (2008) Design of Experiment on Ultra Violet Curing Die Attach Film by Using Taguchi Method to Optimize Quality. [Final Year Project] (Unpublished)

Raja Faeez Shah Bin Raja Mudzaffar Shah, Raja Faeez Shah (2008) Design of A Steering Mounted Paddle Shifter for A Racing Car. [Final Year Project] (Unpublished)

Razali, Fatin Nabilah (2008) EFFECT OF USED GROUND COPPER SLAG IN PROPERTIES OF CONCRETE DESIGN. [Final Year Project] (Unpublished)

Rahmat Sam, Mohd Farid (2008) Application oflnfiltration Trench as a Community Retention Facility in Seri Iskandar. [Final Year Project] (Unpublished)

Rosli, Mohd Firdaus (2008) CITY BUS CHARACTERISTICS:IPOH- TANJUNG RAMBUTAN. [Final Year Project] (Unpublished)

Razali, Mohd Khairul Zaime (2008) DEVELOPMENT ANDPERFORMANCE TESTING OFONLINETEXT-BASED STRATEGY GAMES. [Final Year Project] (Unpublished)

Rahmat Sam, Mohd Farid (2008) Application of lnfiltration Trench as a Community Retention Facility in Seri Iskandar. [Final Year Project] (Unpublished)

Radzi, Mohd Zulkhairi (2008) Ping Pong Simulation. [Final Year Project] (Unpublished)

Raieza Hanim Rahiman, Raieza Hanim (2008) Investigation on Lost Circulation Materials (LCM) Derived From Durian Peel Waste For Drilling Fluid Formulation. [Final Year Project] (Unpublished)

Richard Lado Longwa Milla, Richard Lado (2008) Optimization of drilling hydraulics in vertical holes. [Final Year Project] (Unpublished)

S

Syarizatul Nadia binti. Rosdi, Syarizatul (2008) Application of Solar Energy in Drying Pepper. [Final Year Project] (Unpublished)

Suhaimi, Nor Ernie Akmal (2008) Characterization of Local Sands for Possible Use as Proppant. [Final Year Project] (Unpublished)

Sulaiman, Mohd Amirul Hakim (2008) BANANA TRUNK AS A LOST CIRCULATION MATERIAL IN HYDROCARBON DRILLING FLUID. [Final Year Project] (Unpublished)

Sha'ari, Asmawi (2008) SIMULATION OF SINTERING IN POWDER METALLURGY APPLICATION FOR FERROUS MATERIALS. [Final Year Project] (Unpublished)

Sabri Hassan Assaari, Sabri Hassan (2008) Evaluation of Factors That Increase Ecommerce Website Conversion Rates. [Final Year Project] (Unpublished)

Saiful Aznan, Muhammad Zulhilmi (2008) Analysis on electrical power requirement of a hybrid solar-electric oven. [Final Year Project] (Unpublished)

Shahary, Siti Ameera (2008) The Study of PoUutants Removal Efficiency in a Vegetated Swale System. [Final Year Project] (Unpublished)

Somhar@ Abdul Hamid, Salihah (2008) NPS MODELING OF SUNGAI PINANG CATCHMENT AREA & WATER QUALITY IMPROVEMENT BY USING BIORETENTION. [Final Year Project] (Unpublished)

Sani, Mohamad Ridzuan (2008) TARGET TRACKING SYSTEM USING ULTRASONIC SENSORS. [Final Year Project] (Unpublished)

Syed Sultan, Syed Shahrhyl (2008) Natural Interaction Using Pinch Gloves. [Final Year Project] (Unpublished)

Sukur, Mohammad Ariff (2008) Mechanical and Microstructural Characterization of Hybrid Composite Developed By Compression Molding. [Final Year Project] (Unpublished)

Saaid, Ahmad Zaki (2008) Scrolling Shooter Game: Seed of Freedom Beta version. [Final Year Project] (Unpublished)

Suriawani Sulaiman, Suriawani (2008) Design of intake cooling system for Taurus 60 Gas Turbine Generator in UTP Gas District Cooling Plant using chilled water supply. [Final Year Project] (Unpublished)

Sitha, Sam (2008) EFFECT OF SHEAR WALLS IN TALL BUILDING. [Final Year Project] (Unpublished)

Salleh, Adibah Bahriah (2008) Litter Rating and The Engineering Solution For Bandar Seri Iskandar. [Final Year Project] (Unpublished)

Sobri, ohd Zulhairi (2008) Behavior of High Strength Concrete Containing Rice Husk Ash (RHA) and Superplasticizer. [Final Year Project] (Unpublished)

Sebi @ Hasbi, Hasmi Saifuddin (2008) The Use of Marine Sand in Bituminous Mix•. [Final Year Project] (Unpublished)

SAN, THET (2008) 3D Virtual Tour For TAIPING Zoo. [Final Year Project] (Unpublished)

Sungsinlert, Anyamanee (2008) Assessing the outcome of Competencies Level from Knowledge-Based Project. [Final Year Project] (Unpublished)

Sidek, Mohd Aziezie (2008) Automated Personality Inventory System. [Final Year Project] (Unpublished)

Shri Subefamaniam, Mukuntha (2008) CLINIC MANAGEMENT SYSTEM. [Final Year Project] (Unpublished)

Saiful Bahari, Siti Khadijah (2008) Effect of Class C Pulverized Fuel Ash on Shear Strength of Silty Sand Soil Type. [Final Year Project] (Unpublished)

Salleh, Nor Safwan Amirul (2008) Nurse Knowledge Sharing Portal. [Final Year Project] (Unpublished)

Sahidi, Nur Saidatul Shida (2008) Organic Removal from Fertilizer Wastewater using Biological Treatment. [Final Year Project] (Unpublished)

Sodana, Kiv (2008) RELATIONSHIP BETWEEN CUBE AND CYLINDER STRENGTHS FOR HIGH STRENGTH CONCRETE. [Final Year Project] (Unpublished)

Saiedi, Hamed (2008) Static and Seismic Stability of the Largest Malaysian Sanitary Landfill. [Final Year Project] (Unpublished)

Serdar Halliyev, Halliyev (2008) Relative Permeability Hysteresis. [Final Year Project] (Unpublished)

Shakawi Efendy Jamaludin, Shakawi Efendy (2008) Study of the Use of Orifice as an Alternative for Steam Trap. [Final Year Project] (Unpublished)

Sufian Hardi Bin Yusof, Sufian Hardi (2008) Failure Analysis on Water Heater Tube. [Final Year Project] (Unpublished)

Seow , Lee Lee (2008) Energy Recovery by Conversion of Thermal Energy of Flue Gases to Electricity. [Final Year Project] (Unpublished)

Siti Fatimah binti Mazalan, Siti Fatimah (2008) Comparative Study of Different CO2 Injection Modes for Baronia RV2 Reservoir. [Final Year Project] (Unpublished)

Soraya Abd Rahman, Soraya (2008) A Study on Co-firing Empty Fruit Bunch (EFB) with Coal as Potential Fuel. [Final Year Project] (Unpublished)

Siti Nur Hidayah Binti Mat Salleh, Siti Nur Hidayah (2008) The Effect of Multiple-use of Polystyrene Cups on Styrene Monomer Migration. [Final Year Project] (Unpublished)

Siti Khadijah Binti Saiful Bahari, Siti Khadijah (2008) Effect of Class C Pulverized Fuel Ash on Shear Strength of Silty Sand Soil Type. [Final Year Project] (Unpublished)

Syafri bin Mohd Yunus, Syafri (2008) Improvement of Oil and Water Separation in Three-Phase Conventional Separator Using Hydrocyclone Inlet Device. [Final Year Project] (Unpublished)

Suriawani Bt Sulaiman, Suriawani (2008) Design of intake cooling system for Taurus 60 Gas Turbine Generator in UTP Gas District Cooling Plant using chilled water supply. [Final Year Project] (Unpublished)

Sasendera S/O Balamohan, Sasendera (2008) Feasibility of Oil-Palm Fronds for Biomass Gasification. [Final Year Project] (Unpublished)

Syahidatulmazidah binti Ismail, Syahidatulmazidah (2008) Magnetic Properties and Corrosion Study on Bonded NdFeB Magnet Using Wet and Dry Binders. [Final Year Project] (Unpublished)

SHAIKH, IMTIAZ ALI (2008) DESIGN AND ANALYSIS OF SYNCHRONOUS DC-DC CONVERTER. [Final Year Project] (Unpublished)

SALIM, MOHAMMAD RAZISW ADY (2008) Experimental Modeling ofthe Flow in the Furnace Top of an Ethane Cracker at EPEMSBPaka. [Final Year Project] (Unpublished)

Shafri, Muhammad llham Faez (2008) Peer to Peer Video Streaming Application. [Final Year Project] (Unpublished)

SHUKOR, MOHD NOR AKMAL (2008) THE STUDY OF AIR FLOW MOVEMENT USING GAMBIT AND FLUENT SIMULATION (2D) PROGRAM FOR PASSIVE VENTILATION DESIGN CONCEPT OF LOW RISE BUILDING IN MALAYSIA. [Final Year Project] (Unpublished)

SOHAIMI, INTAN SURIA (2008) POWER MANAGEMENT AND POWER FACTOR CORRECTION OF A SINGLE PHASE INDUCTION MOTOR. [Final Year Project] (Unpublished)

T

Tuan Mohammad, Tengku Mohd Saifuddin (2008) SENSITIVITY STUDY OF ENVIRONMENTAL FORCES ON JACKET OFFSHORE STRUCTURE. [Final Year Project] (Unpublished)

Tengku Hamzah, Tengku Anis Amalina (2008) The Effect of Different Filler Materials and Gradation on the eharacteristics of Bituminous Mixture. [Final Year Project] (Unpublished)

Temizi, Mohd Zulhafiz (2008) Universiti Teknologi Petronas Virtual FYP Communities An Online Knowledge Sharing and Resource Centre. [Final Year Project] (Unpublished)

Ton Mohamad, Mohamad Ihsan (2008) Automated Clothesline System. [Final Year Project] (Unpublished)

Tan , Min Chuan, Jason (2008) Evaluations and Modelling of Residual Stress of a joining- Sialon to Austenitic Stainless Steel. [Final Year Project] (Unpublished)

Tan , Shern Shiou (2008) 3D Spatial Sensor. [Final Year Project] (Unpublished)

TAN , YINN HOONG (2008) A STUDY OF MECHANICAL ROBUSTNESS OF PORTABLE ELECTRONIC DEVICE SUBJECTED TO MECHANICAL DROP. [Final Year Project] (Unpublished)

Tamat, Mat Sahnizam (2008) Thickening of Municipal Sludge and Treatment of Leachate Using Recycled Ferrous Sulphate (RFS) Extracted from Groundwater Treatment Plant Sludge. [Final Year Project] (Unpublished)

Tuan Nur Aiman Bin Tuan Kamaruddin, Tuan Nur Aiman (2008) Investigation of the Effect of Exhaust Middle Pipe Length to the Engine Performance. [Final Year Project] (Unpublished)

Tan , Yinn Hoong (2008) A Study of Mechanical Robustness of Portable Electronic Device Subjected to Mechanical Drop. [Final Year Project] (Unpublished)

Thembinkosi Robert Khumalo, Robert Khumalo (2008) Analytical and CFD Simulation of an on-roof Wind Generator Using Biomass. [Final Year Project] (Unpublished)

Taufi Qil Hafiz Bin Mohd Tahar, Taufi Qil Hafiz (2008) Modelling and Analysis of a Car Bumper. [Final Year Project] (Unpublished)

Teh, Choon Chi (2008) Study on Characterisation and Property of Local Sand. [Final Year Project] (Unpublished)

Tan , Jason Min Chuan (2008) Evaluation and Modelling Residual Stress of a Joining - Sialon to Austenitic Stainless Steel. [Final Year Project] (Unpublished)

Thaweesak Hemchi, Thaweesak (2008) Thermal stress and Thermal expansion in a brake drum of heavy commercial truck. [Final Year Project] (Unpublished)

V

Vu, Phuong Anh (2008) Softness Metric for Furniture Virtual Shopping. [Final Year Project] (Unpublished)

W

Wan Mazlan, Wan Mohd Safwan (2008) Development of an External Laptop Cooler with Thermoelectric Device. [Final Year Project] (Unpublished)

Wong , Chun Wah (2008) Comparison between Ultimate Pile Capacity of Bored Piles Determine Using Analytical method, Numerical Method and Pile Load Test At Puncak Alam, Project UiTM. [Final Year Project] (Unpublished)

Wan Chek, Mohd Najib (2008) ANALYSIS OF COASTAL EROSION AT MIRI CRUDE OIL TERMINAL. [Final Year Project] (Unpublished)

Wahab, Ahmadnizam (2008) CLICKLESS MOUSE INTERACTIVITY FOR TOURISM WEBSITE. [Final Year Project] (Unpublished)

Wan Ismail, Che Wan Mohd Hafizul Azizi (2008) Design and Analysis of a Drive Train System for a Small Race Car. [Final Year Project] (Unpublished)

Wan Mazlan, Wan Muhamad Muhsin (2008) INVENTORY MANAGEMENT AND ASSET TRACKING SYSTEM FOR SOLUTION ASSESSMENT & DEVELOPMENT CENTRE (SADC). [Final Year Project] (Unpublished)

Wan Ibrahim, Wan Mohd Syazwan (2008) RELIABIUTY PREDICTION AND MODELING: A Case Study ofDry Gas Seal and Buffer Gas System on Compressor for Gas Transportation. [Final Year Project] (Unpublished)

WAE-ESOR, JETSRAPHORN (2008) RFID REAL TIME TRACKER. [Final Year Project] (Unpublished)

Wong , Chung Hoong (2008) Study of Drop Impact Resistance on Fiber Reinforced Composite Plates. [Final Year Project] (Unpublished)

Wan Amalina Wan Zaharuddin, Wan Amalina (2008) Study on the Integrity of the Intumescent Bonding to the Steel Substrate before Fire Exposure. [Final Year Project] (Unpublished)

Wan Mohd Syazwan Bin Wan Ibrahim, Wan Mohd Syazwan (2008) Reliability Prediction And Modeling: A Case Study Of Dry Gas Seal And Buffer Gas System On Compressor For Gas Transportation. [Final Year Project] (Unpublished)

Wan Ahmad Fuad Ali bin Wan Abd Ghafar, Wan Ahmad Fuad Ali (2008) Comparison of Methods to Reduce Grid Orientation Effect in Miscible Flood Simulation. [Final Year Project] (Unpublished)

Wan Mohd Syazwan Bin Wan Ibrahim, Wan Mohd Syazwan (2008) Reliability Prediction And Modeling: A Case Study Of Dry Gas Seal And Buffer Gas System On Compressor For Gas Transportation. [Final Year Project] (Unpublished)

Y

Yusop, Siti Haida (2008) Removal of Copper and Cadmium from Aqueous Solution by Adsorption on Coconut Coir Carbon. [Final Year Project] (Unpublished)

Yaacob, Aizuddin Faiz (2008) SOIL IMPROVEMENT ON MINING SAND USING PULVERIZED FUEL ASH (PFA) WITH LIME ADDITIVE. [Final Year Project] (Unpublished)

Y ahaya, Mohd Roziee (2008) Effect of Used Engine Oil to High Strength Microwave Incinerated Rice Husk Ash (MIRRA) Concrete. [Final Year Project] (Unpublished)

Yusoff, Nurul Liza (2008) Virtual Learning Space for Kindergarten. [Final Year Project] (Unpublished)

Yusheila Bt Md Yunus, Yusheila (2008) Hybrid Solar Dryer with Biomass Integration. [Final Year Project] (Unpublished)

YAHYA, MURNI (2008) AN IMPROVED ELECTRONIC BALLAST FOR FLUORESCENT LAMP. [Final Year Project] (Unpublished)

Z

ZUKAINAIN, MD UZAIR FIDAIY (2008) THE EFFECT OF MICROWAVE INCINERATED RICE HUSK ASH ON THE STRENGTH OF FLOATING FOAMED MORTAR. [Final Year Project] (Unpublished)

Zamri, Ahmad Fairus (2008) Analysis of Jet Fire on IntumescentCoating Applied on SteelSubstrate. [Final Year Project] (Unpublished)

Zuraini Hanim Binti Zaini, Zuraini Hanim (2008) Assessing User Acceptance on Competencies Level Assessment System using Technology Acceptance Model. [Final Year Project] (Unpublished)

Zainalabidin, Muhammad Aizuddin (2008) MISCIBLE C02 INJECTION: SENSITIVITY TO FLUID PROPERTIES TINGGI FIELD. [Final Year Project] (Unpublished)

Zakaria, F athiah (2008) Analysis ofHigb Frequency Transformer Design in Converter Application. [Final Year Project] (Unpublished)

Zainal, Mazby Zubir Khairul Nazri (2008) Study of Value Engineering Implementation Among Contractors In Malaysia. [Final Year Project] (Unpublished)

Zul Hisham, Fatin Liana (2008) Effect of Used Engine Oil to High Strength Microwave Incinerated Rice Husk Ash (MIRHA) Concrete. [Final Year Project] (Unpublished)

Zulkifli, Ahmad Yazid (2008) Municipal Wastewater Treatment by Sequencing Batch Reactor. [Final Year Project] (Unpublished)

Zakaria, Nor Salwanie (2008) COMPILATION OF DESIGN METHODOLOGY FOR SOIL NAILING. [Final Year Project] (Unpublished)

Zul Hisham, Fatin Liana (2008) Effect of Used Engine Oil to High Strength Microwave Incinerated Rice Husk Ash (MIRRA) Concrete. [Final Year Project] (Unpublished)

Zazali, Mardhia (2008) AJAX Based Online Shopping Application. [Final Year Project] (Unpublished)

Zullekfli, Zairul A'ziya (2008) Development of a Database for Precast Works9 Production Rates. [Final Year Project] (Unpublished)

Zadeh Mahabadi, Sayed AH Kasaei (2008) Real-Time Stereopsis. [Final Year Project] (Unpublished)

Zakaria, Ariff Ezwan (2008) Sintering Carbon Nanotubes Reinforced Copper Powder Using Different Particle. [Final Year Project] (Unpublished)

Zairul A'ziya bt Zullekfli, Zairul A'ziya (2008) Development of a Database for Precast Works' Production Rates. [Final Year Project] (Unpublished)

Zatul Iffah Bt Mohd Nor, Zatul Iffah (2008) Alternative Solution to Sand Blanket in Vertical Drain. [Final Year Project] (Unpublished)

Zarizambri Bin Ahmad, Zarizambri (2008) Design and Analysis of a Pedal Box System for a small Race-car. [Final Year Project] (Unpublished)

Zul Hilmi bin Awang, Zul Hilmi (2008) Investigation The Tribological Properties of Fiber Composite Material Reinforced With Carbon Nano Tube(CNT). [Final Year Project] (Unpublished)