Browse by Type

A

ABDUL KHALIL, MUHAMMAD IMAN (2023) QUANTITATIVE RISK ASSESSMENT FOR WASTE TO ENERGY (WTE) FACILITY. [Final Year Project] (Submitted)

AHMAD SHUHAIRIL, AHMAD NABIL (2023) ADDITIVE WINTERIZATION OF BIODIESEL FOR COLD FLOW PROPERTIES IMPROVEMENT. [Final Year Project] (Submitted)

ABD AZIZ, MUHAMMAD AKMAL ZIKRI (2023) EXPERIMENTAL AND MODELING PROCESS OF LEAD ADSORPTION ON SILICA NANOCAPSULES ADSORBENT. [Final Year Project] (Submitted)

AZLEYZAM, MUHAMMAD AMEER MUQRIE (2023) COOLING STRATEGY OF 18650 BATTERY USING MICROFLUIDIC CHANNEL AS HEAT SINK. [Final Year Project] (Submitted)

AMIR SHARIFUDIN, MUHAMMAD FARIS ZAFRAN (2023) DEVELOPMENT AND CHARACTERIZATION OF ZEOLITE NaY ADSORBENT FOR DIRECT AIR CAPTURE. [Final Year Project] (Submitted)

Abdullah, Muhamad Norhafiszi (2023) Extraction and Recovery of Protein from Microalgae using Deep Eutectic Solvent assisted by Ultrasound. [Final Year Project] (Submitted)

AZMAN, NUR NATASYA AMIERA (2023) SYNTHESIS & APPLICATION OF Fe3O4 / TiO2 NANOPARTICLES FOR BIOUAGMENTATION PROCESS IN OILY SLUDGE WATER. [Final Year Project] (Submitted)

AMIR SANI, AMIZATUL AZWANI (2023) DYNAMIC AND CONTROL OF AIR-SEPARATION UNIT. [Final Year Project] (Submitted)

AU DANIEL, AMANDA DEIDRE (2023) GREEN SYNTHESIS OF REDUCED GRAPHENE OXIDE WITH DEEP EUTECTIC SOLVENT FOR SYNERGISTIC ENCAPSULATION OF CURCUMIN AND TOCOTRIENOL. [Final Year Project] (Submitted)

ABDULLAH, NURUL IZZATY (2023) DEVELOPMENT OF ARTIFICIAL INTELLIGENCE (AI) FOR PREDICTING PROCESS UNIT ANOMALY CONDITION USING DECISION TREE CLASSIFIER MACHINE LEARNING MODEL. [Final Year Project] (Submitted)

AZAHARI, MOHAMAD AZAM (2023) MODIFICATION OF GLYCEROL-TREATED POLYHYDROXYALKANOATES WITH CELLULOSE FROM BANANA PEEL FIBRES. [Final Year Project] (Submitted)

AZLIN SHAH, MUHAMMAD HAKIM (2023) EXTRACTION OF REE FROM AQUEOUS SOLUTION USING IONIC LIQUIDS. [Final Year Project] (Submitted)

ABDUL HADI, MUHAMMAD AMIRUL ADIB (2023) PERIODIC COMPUTATIONAL FLUID DYNAMICS (CFD) SIMULATION OF MEMBRANE CONTACTOR USED FOR ACID GAS ABSORPTION SYSTEM: MOMENTUM AND MASS TRANSFER ANALYSIS. [Final Year Project] (Submitted)

ABDUR RAHIM, MUHAMMAD ADHAM (2023) DISSOLUTION OF PEEK USING IONIC LIQUIDS. [Final Year Project] (Submitted)

ABDUL LATIF, ALI (2023) THE INCORPORATION OF GLYCEROL AS COMPATIBILIZER IN PHA-CELLULOSE FIBERS MATRIX AS BIOPLASTIC. [Final Year Project] (Submitted)

AHMAD BASRI, SITI NURFATIHAH (2023) OIL SORPTION PROPERTIES OF PRISTINE AND MODIFIED KAPOK FIBER. [Final Year Project] (Submitted)

ANAK STEVEN, RICHARD (2023) CARBONIZATION OF POLY(S-MA) FOR EFFECTIVE REMOVAL OF CHROMIUM FROM WASTEWATER. [Final Year Project] (Submitted)

ANPARASAN, AISSWARYA (2023) ONE-POT MICROWAVE-ASSISTED CONVERSION OF BAMBOO HYDROLYSATE INTO 2-5 DIMETHYLFURAN. [Final Year Project] (Submitted)

ABD KADIR, NUR HASNI ATIRAH (2023) RECOVERY OF NICKEL AND COBALT FROM NITRATE SOLUTIONS USING PROGRESSIVE FREEZING. [Final Year Project] (Submitted)

ABU NAZARI, INDAH BALQIS (2023) BIODIESEL PURIFICATION USING ETHYL ACETATE THROUGH SOLVENT-AIDED CRYSTALLIZATION. [Final Year Project] (Submitted)

ANAK SAMBANG, LEONARDO (2023) ENHANCED ADSORPTION OF METHYLENE BLUE USING OPTIMIZED MERANTI WOOD ACTIVATED CARBON: A SUSTAINABLE APPROACH FOR WASTEWATER TREATMENT. [Final Year Project] (Submitted)

Amir Sani, Amirul Ikhwan (2023) Development of UTP Transportation Mobile Application. [Final Year Project]

B

BALACHANDRAN, BAVAANEAY (2023) H2 PRODUCTION VIA CATALYTIC DECOMPOSITION OF CH4 OVER SPHERICAL NI/FE-GEOPOLYMER CATALYST USING CH4/CO2 MIXTURE. [Final Year Project] (Submitted)

BOLHI, AHMAD IRHAM (2023) ZIF-90 FOR CO₂ CARBON CAPTURE BY USING MOLECULAR SIMULATION APPROACH. [Final Year Project] (Submitted)

BADRUL HISHAM, NUR ARIANA SOFEA (2023) THE POTENTIAL OF USING PALM OIL MILL EFFLUENT (POME) TO CULTIVATE MICROALGAE FOR LIPID PRODUCTION. [Final Year Project] (Submitted)

C

CHEAH, MEI YUN (2023) IONIC LIQUID ASSISTED MODIFIED KAPOK (CERIBA PENANDRA L. GAERTN.) FIBERS FOR OILY WASTEWATER TREATMENT. [Final Year Project] (Submitted)

CHAN, ZI JING LILIAN (2023) DEVELOPMENT OF POLYMER IONIC LIQUID AS AN ANION EXCHANGE MEMBRANE. [Final Year Project] (Submitted)

CHAI, JOEVY (2023) SELECTIVE LEACHING OF LITHIUM FROM SPENT LITHIUM-ION BATTERIES USING WATER AS GREEN LEACHING AGENT. [Final Year Project] (Submitted)

CHEAH, ZHEN HAO (2023) EXTRACTION OF BIOACTIVE MOLECULES FROM HYDRO DISTILLATION TREATED AGARWOOD WOOD CHIPS WITH MACERATION AND ULTRASOUND-ASSISTED EXTRACTION. [Final Year Project] (Submitted)

CHEW, BEN KIAT (2023) THE EFFECT OF PRE-TREATMENT AND SELECTION OF SOLVENT FOR EFFICIENT EXTRACTION OF MICROALGAE LIPID. [Final Year Project] (Submitted)

Chong, Pei Ning (2023) Determination Of Enablers and Disablers Of Environment-Food-Energy- Water (EFEW) Nexus In Biomass Value Chain. [Final Year Project] (Submitted)

E

EDHAN, NUR HASANAH (2023) DEVELOPMENT OF CRUDE DISTILLATION UNIT SIMULATION MODEL FOR UNIT MONITORING AND OPTIMIZATION. [Final Year Project] (Submitted)

H

HARUN, JAD HARIZZ (2023) THE EFFECT OF METAL RATIO ON THE PHYSICOCHEMICAL AND MORPHOLOGICAL PROPERTIES OF Ni-CaO/MCF CATALYST AND ITS EFFECT IN ESTERIFICATION REACTION OF GLYCEROL AND ACETIC ACID. [Final Year Project] (Submitted)

HO, YIN LIANG (2023) PROCESS SIMULATION OF PRESSURE SWING ADSORPTION (PSA) PROCESS IN AIR SEPARATION. [Final Year Project] (Submitted)

HAIRIZAN, HAIQAL AFIF (2023) OPTIMIZING A COLD-STATE MOVING BED REACTOR PERFORMANCE FOR COAL PYROLYSIS: AN ANALYSIS OF WEDGE’S HALF-ANGLES AND FLOW CHARACTERISTICS USING PRINCIPAL COMPONENT ANALYSIS. [Final Year Project] (Submitted)

HAIRUDIN, IIMAN DZULHUSSNI (2023) ADHESION IMPROVEMENT OF ANTIBIOFOULING COATING BY INCORPORATING POLYMER HYDROGEL WITH GRAPHENE OXIDE. [Final Year Project] (Submitted)

HAJI AHMAD MAHYUDDIN, SITI SYAHIRAH HAZIQAH (2023) OPTIMISATION OF BIOETHANOL PRODUCTION FROM SAGO CELLULOSE. [Final Year Project] (Submitted)

Hamdan, Hannah (2023) Revenue Projections and Report Dashboard Using Power BI. [Final Year Project] (Submitted)

Harith, Kamilah (2023) Photoelectrochemical (PEC) System Based on Zn-Ni Deposition on TiO2 Photoanode for Water Splitting Process. [Final Year Project] (Submitted)

I

IBRAHIM, MUHD FARIDZ HISYAM (2023) PHYSICAL, MECHANICAL AND THERMAL CHARACTERISTICS OF PHA-CELLULOSE FROM BIOMASS FIBERS COMPOSITE FILMS. [Final Year Project] (Submitted)

J

JUNAIDY, SARAH SYAZWANY (2023) OPTIMIZATION OF BIODIESEL PURIFICATION THROUGH SOLVENT-AIDED CRYSTALLIZATION USING 2-METHYLTETRAHYDROFURAN AS A GREEN SOLVENT. [Final Year Project] (Submitted)

J Almubarak, Sadiq Abdulkarim (2023) Development of a Predictive Safety Assessment Model for Emollients Used in Beauty and Hygiene Products Using Bayesian Network. [Final Year Project] (Submitted)

K

KAMAROL ZAMAN, AINUR FARISSA (2023) OPTIMIZATION OF LIGNIN EXTRACTION FROM COCONUT PITH BY ALKALINE TREATMENT. [Final Year Project] (Submitted)

KHALEED, SITI KHALEELAH (2023) REMOVAL OF DYE FROM WATER USING MAGNETIC BIOCHAR ADSORBENTS. [Final Year Project] (Submitted)

KOO, WAI YEE (2023) STABILITY AND AGEING EFFECTS OF Pt/C CATALYST INK FOR POLYMER ELECTROLYTE MEMBRANE FUEL CELL. [Final Year Project] (Submitted)

KOAY, WERN CHENG (2023) SYNTHESIS AND CHARACTERIZATION OF UIO-66 METAL-ORGANIC FRAMEWORK LOADED WITH BIS (TRIFLUOROMETHANESULFONYL) IMIDE IONIC LIQUID. [Final Year Project] (Submitted)

L

LIM, SHEI RONG (2023) ATOMISTIC INVESTIGATION OF POLYSULFONE BASED IONIC LIQUIDS (ILS) MIXED MATRIX MEMBRANES USING ILS MODIFIED GRAPHENE OXIDE (GO) FILLER FOR ENHANCED CO2/CH4 SEPARATION. [Final Year Project] (Submitted)

LOOI, LEE WEN (2023) TECHNO-ECONOMIC ANALYSIS OF ANAEROBIC DIGESTION OF CHICKEN MANURE FOR TREATMENT AND VALUE ADDITIONS IN MANJUNG REGION. [Final Year Project] (Submitted)

LEE, BOBBY KWONG YII (2023) ELUCIDATION OF IONIC LIQUID FORMULATION IN ENHANCING SEPARATION PERFORMANCE OF SILICA/POLYIMIDE MIXED MATRIX MEMBRANE FOR CO2 REMOVAL FROM CH4. [Final Year Project] (Submitted)

LOO, YONG JIE (2023) TAILORING PVDF-HFP SILICA SUPEROMNIPHOBIC FLATSHEET MEMBRANE FOR CO2 CAPTURE IN MEMBRANE GAS ABSORPTION SYSTEM. [Final Year Project] (Submitted)

LIONG, KUI ZAO (2023) PREDICTION OF IONIC LIQUID TOXICITY USING SUPERVISED MACHINE LEARNING. [Final Year Project] (Submitted)

LEE, ROGER JUN SHEN (2023) MULTIPHASE FLOW REGIME CHARACTERISTICS OF AIR AND WATER IN MICROCHANNEL. [Final Year Project] (Submitted)

LIAU, GLADYS PIN HUI (2023) CATALYTIC PERFORMANCE OF Co/AL2O3 IN THE VALORIZATION OF PETROLEUM SLUDGE TO VALUE ADDED PRODUCTS. [Final Year Project] (Submitted)

M

MUHAMMAD IZZUDDIN, AHMAD IMRAN AFIF (2023) CHARACTERIZATION OF MCF SUPPORTED NI-ZR CATALYST AND ITS EFFECT ON THE ESTERIFICATION OF ACETIC ACID AND GLYCEROL TO ACETIN. [Final Year Project] (Submitted)

MOHD ZAIDI, MUHAMMAD DANIAL AIMAN (2023) PRODUCTION OF GRAPHENE FROM WASTE PALM KERNEL SHELL BY LIGNIN EXTRACTION. [Final Year Project] (Submitted)

MURUGEN, SHUUWEATHA (2023) ESTERIFICATION OF GLYCEROL WITH ACETIC ACID USING NICKEL- COBALT SUPPORTED ON MESOCELLULAR FOAM (MCF) CATALYST. [Final Year Project] (Submitted)

MARDZI, NIK NUR AISYA BALQIS (2023) STUDY ON BORON REMOVAL FROM PRODUCED WATER USING PILOT SCALE OF CONSTRUCTION WETLAND. [Final Year Project] (Submitted)

MAMAT, MUHAMMAD ISMAIL (2023) SYNTHESIS AND CHARACTERIZATION OF SUSTAINABLE POLYMER FOR CO2 CAPTURE. [Final Year Project] (Submitted)

MOHD ZAMRI, NUR SHAFIQA (2023) COMPARATIVE ANALYSIS OF MINIMAL IGNITION TEMPERATURES OF LAYER AND CLOUDS OF SELECTED DUST. [Final Year Project] (Submitted)

MOHD RADZI, HALIMATUN SYAFIQAH (2023) APPLICATION OF MICROWAVE HEATING IN PREPARATION OF FUNCTIONALISED ACTIVATED CARBON FROM RUBBER SEED SHELL AND COCONUT SHELL. [Final Year Project] (Submitted)

MOLINARI, HARIZ (2023) GRAPHENE-BASED MEMBRANE DEVELOPMENT FOR HYDROGEN ISOTOPE SEPARATION. [Final Year Project] (Submitted)

MEOR NAZIR, MEOR AQIF IRFAN (2023) RAMAN SHIFT INVESTIGATION OF SULPHUR SPECIES DETECTION IN BI-PHASIC SYSTEM. [Final Year Project] (Submitted)

MUHAMAD ZAIDI, MUHAMMAD AKHMAL NAIM (2023) DIGITALIZATION OF ESG PERFORMANCE INDEX REPORTING FOR SEMICONDUCTOR MANUFACTURING INDUSTRIES. [Final Year Project] (Submitted)

MAURICE, MAXIMUS (2023) INFLUENCE OF AMINO ACID ON CO2 HYDRATE FORMATION IN TREATING SALINE WATER. [Final Year Project] (Submitted)

MOHD HAMDAN, AININ SOFIYA (2023) THE POTENTIAL OF ELECTRICITY AND LIPID PRODUCTION FROM MICROALGAE CULTIVATION. [Final Year Project] (Submitted)

MARIMAN, AMIRA MARSYA (2023) MATHEMATICAL MODELLING OF MULTI-COMPONENT GAS STREAM FOR POTENTIAL APPLICATION IN MEMBRANE BASED SEPARATION. [Final Year Project] (Submitted)

MOHD YAZ, MOHAMAD SYAFIQ (2023) UTILIZATION OF WASTE EMPTY FRUIT BUNCH (EFB) FOR HYDROGEN PRODUCTION VIA PYROLYSIS PROCESS. [Final Year Project] (Submitted)

Murugayah, Rhuvaynn Vignesh (2023) Cultivation and Extraction of Polyhydroxybutyrate from Microalgae. [Final Year Project] (Submitted)

MD TOP, MUHAMMAD HAZWAN ASYRANI (2023) EFFECTS OF AMINE AND FLY ASH CONTENTS OF POLY (ACRYLIC ACID-CO-ACRYLAMIDE) HYDROGELS ON CARBON DIOXIDE ADSORPTION. [Final Year Project] (Submitted)

MOHD YAZID, MUHAMMAD MIHJAQ AMARIN (2023) INVESTIGATION ON DYE REMOVAL USING GREEN AND LOW-COST AGRICULTURE BIOMASS. [Final Year Project] (Submitted)

MOHD AMIN, MUHAMMAD NASIHIN AMIR (2023) CFD MODELLING OF GAS-LIQUID MIXTURE IN MICROCHANNEL REACTOR. [Final Year Project] (Submitted)

Mohamed Nohairi, Muhammad Irfan Syamil (2023) Delignification of oil palm empty fruit bunches using deep eutectic solvent assisted by ultrasound and valorization by enzymatic hydrolysis. [Final Year Project] (Submitted)

MOHAMED RAZI, NURUL FATIHAH (2023) CATALYTIC PERFORMANCE OF CO/AL2O3-LA2O3 IN THE VALORIZATION OF PETROLEUM SLUDGE TO VALUE ADDED PRODUCTS. [Final Year Project] (Submitted)

MUHAMMAD FAISAL, MUHAMMAD ADIBFARHAN (2023) DEVELOPMENT OF INHERENTLY SAFER DESIGN ASSESSMENT FRAMEWORK USING PHENOMENA IDENTIFICATION AND RANKING TABLE (PIRT). [Final Year Project] (Submitted)

Mirza Arshad Beg, Mirza Adam Beg (2023) Professional Networking. [Final Year Project] (Submitted)

N

NORIZAN, NUR SABRENA NATASHA (2023) DISPERSANT EFFECTIVENES ON OIL SPILL. [Final Year Project] (Submitted)

NUR FATIN NAJIHAH, FAIZAL (2023) DETERMINATION OF NANOCRYSTALLINE CELLULOSE FROM KENAF. [Final Year Project] (Submitted)

NAZARUDIN SHAH, NURUL’AIN SHAHIRA (2023) DEVELOPMENT OF ZEOLITE IMIDAZOLATE FRAMEWORK – 7 FOR METHANE CAPTURE. [Final Year Project] (Submitted)

NAZRI, NURIN ADIA (2023) LNG COLD ENERGY RECOVERY USING COMBINED PINCH-EXERGY ANALYSIS. [Final Year Project] (Submitted)

NGU, JENNIE SIEW ZHEN (2023) INVESTIGATION OF BIO-OIL EXTRACTION FROM DELIGNIFIED EMPTY FRUIT BUNCH (EFB) VIA SUPERCRITICAL CARBON DIOXIDE AND SOXHLET EXTRACTION. [Final Year Project] (Submitted)

NG, YING HUEY (2023) USING OPERATIONAL DATA-DRIVEN STATIC BAYESIAN NETWORK FOR PERFORMANCE MONITORING OF OFFSHORE CENTRIFUGAL GAS COMPRESSOR TO PREDICT INSPECTION. [Final Year Project] (Submitted)

O

ONG, VIVIAN (2023) MOLECULAR DESIGN OF HYDROPHOBIC SILICA FILLER IN POLYPROPYLENE BASED MIXED MATRIX MEMBRANE CONTACTOR FOR CO2/CH4 SEPARATION. [Final Year Project] (Submitted)

OTHMAN, MASITAH (2023) SUGAR ALCOHOLS AS CRYOPROTECTANTS TO PRESERVE PHYSICOCHEMICAL CHARACTERISTICS AND SHELF LIFE OF FROZEN FRUITS. [Final Year Project] (Submitted)

Ooi, Samantha Xue Xhuan (2023) Investigation of Foam-Filled Fiber Reinforced Sandwich Composite Structuresunder Quasi-static Indentation. [Final Year Project] (Submitted)

P

Phua, Hui Sin (2023) Preparation & Evaluation of Reduced Graphene Oxide from Lignin of Rubber-Seed Shell (RSS) as Potential Supercapacitor. [Final Year Project] (Submitted)

PAI, JUN JIE (2023) SCREENING & DESIGN BIOCOMPATIBLE AND BIODEGRADABLE IONIC LIQUIDS USING COSMO-RS FOR FOOD INDUSTRIES. [Final Year Project] (Submitted)

Past Year Exam Question (2023) FBL0024 - TECHNICAL ENGLISH. [Final Year Project]

R

RAMSHIDI, MOHAMMAD NAZLAN (2023) THE EFFECTS OF ELECTRON BEAM RADIATION TO THE CARBON DIOXIDE ADSORPTION PROPERTIES OF AMINE-IMPREGNATED POLY(ACRYLAMIDE-CO-ACRYLIC ACID) AEROGEL. [Final Year Project] (Submitted)

ROZY, NUR ALIAH (2023) DEVELOPMENT OF NANOCELLULOSE FROM BIOMASS USING IONIC LIQUIDS WITH CARBOXYLATED NITRILE BUTADIENE RUBBER COMPOSITE. [Final Year Project] (Submitted)

RUSLI, AINA AFRINA (2023) AUTOMATED TARGETING MODELLING (ATM) FOR WATER-CARBON NEXUS STUDY OF OPTIMAL WATER SYSTEMS DESIGN. [Final Year Project] (Submitted)

ROEDY BOEAMEN, NURFARAH AIN (2023) KINETIC EVALUATION OF METHYLENE BLUE ADSORPTION USING GRAPHENE-HYDROGEN TITANATE NANOTUBES (HTNT) COMPOSITE. [Final Year Project] (Submitted)

RAZMAN, ALISSA NADIA (2023) ELUCIDATION OF ADSORPTION PROPERTIES OF ZEOLITE 13X FOR CO₂ CAPTURE BY USING MOLECULAR SIMULATION APPROACH. [Final Year Project] (Submitted)

Ravi, Divin Kumar (2023) Bio Lubricant Production Over Modified Alkaline Catalyst from Waste Pome. [Final Year Project] (Submitted)

REUBEN, JASHMEN (2023) MODELLING OF UNIFORM FLOW FLUID IN DESIGNING NUMBERING-UP MICROCHANNEL REACTOR. [Final Year Project] (Submitted)

ROSMIZAN, MOHAMAD FIRDAUS (2023) SEEDED FRACTIONATION OF REFINED, BLEACHED AND DEODORISED PALM OIL (RBDPO) THROUGH PROGRESSIVE FREEZING (PF). [Final Year Project] (Submitted)

RAVICHANDRAN, KHERREN RAJ (2023) FINANCIAL FORECASTING USING LINEAR REGRESSION MODEL. [Final Year Project] (Submitted)

S

SHARIMAN, AFIQAH SYAHIRAH (2023) QUANTITATIVE RISK ASSESSMENT OF HYDROGEN PRODUCTION FACILITY. [Final Year Project] (Submitted)

SHAHRIL, HADIF HARRAZ (2023) STUDY OF MULTIPURPOSE CHEMICAL INHIBITOR FOR CORROSION USING LINEAR POLARIZATION RESISTANCE IN CO2 RICH GAS. [Final Year Project] (Submitted)

SHAHFUL BAHARIN, SYAWALIEYANA NATASYA (2023) SYNERGETIC EFFECTS OF BENTONITE CLAY AND SODIUM DODECYL SULPHATE ON THE FORMATION OF CO2 HYDRATE. [Final Year Project] (Submitted)

SIM, JIA LI (2023) ENHANCING CARBON REDUCTION WITH LIGNIN/Mg-DOPED TiO2 PHOTOCATALYST: EXPLORING THE IMPACT OF SONICATION DURATION, LIGHT SOURCES, AND HOLE SCAVENGER. [Final Year Project] (Submitted)

SHARIFFUDDIN, MUHAMMAD NABIL FIKRI (2023) QUANTIFICATION AND MITIGATION OF CARBON FOOTPRINT IN PETROLEUM REFINERY PROCESS THROUGH SIMULATION SOFTWARE. [Final Year Project] (Submitted)

SHANMUGAM, YOSHINII (2023) A COMPARATIVE TECHNO-ECONOMIC ANALYSIS OF STEAM REFORMING AND BI-REFORMING OF METHANE FOR METHANOL SYNTHESIS. [Final Year Project] (Submitted)

SARANGAPANI, AGATHIYAR VARMAN (2023) QUANTITATIVE RISK ASSESSMENT OF HYDROGEN DELIVERY INFRASTRUCTURE. [Final Year Project] (Submitted)

SRINIVASAN, DIVIYAN (2023) EXPERIMENTAL STUDY OF FORMATION OF CO2 GAS HYDRATE IN PRESENCE OF POLYSORBATE 80. [Final Year Project] (Submitted)

SOLIHAN, MUHAMMAD IMAN DAFFA (2023) SYNTHESIS OF COFFEE GROUND BASED ACTIVATED CARBON VIA A SINGLE STEP CO2 ACTIVATION. [Final Year Project] (Submitted)

SAPIE, MUHAMMAD ATIF SHUKRY (2023) PERFORMANCE ANALYSIS OF ALKALINE-SURFACTANT-POLYMER IN PRODUCING ULTRALOW INTERFACIAL TENSION VALUE TO ACHIEVE WINSOR TYPE III MICRO EMULSION. [Final Year Project] (Submitted)

T

THANGARAJAH, JEGHAN (2023) DEVELOPMENT OF NEW INDEX FRAMEWORK TO EVALUATE SAFETY PERFORMANCE LEVEL USING PROXIMITY TO TARGET APPROACH FOR OIL AND GAS INDUSTRY. [Final Year Project] (Submitted)

TUAN AZMI, TUAN AMIRUL HAZIM (2023) HOTSPOT DETECTION OF PHOTOVOLTAIC PANEL IN LARGE SCALE SOLAR (LSS) FARM USING CONVOLUTIONAL NEURAL NETWORK (CNN). [Final Year Project] (Submitted)

TUNG, WEI LAM (2023) MULTI-OBJECTVTIVE OPTIMIZATION OF CARBON DIOXIDE UTILIZATION SCHEME TO PRODUCE VALUABLE FUELS USING PYTHON AND ASPEN PLUS. [Final Year Project] (Submitted)

TAN, HONG KIAT (2023) PERFORMANCE ASSESSMENT AND PLANTWIDE CONTROL OF N-BUTANE ISOMERIZATION PROCESS. [Final Year Project] (Submitted)

TAMIN, NUR FATIHAH (2023) DEVELOPMENT OF ADSORBENT DERIVED FROM PALM OIL WASTE FOR RUBBERY WASTEWATER TREATMENT. [Final Year Project] (Submitted)

TAMILVANAN, SURIYA (2023) COMPARATIVE QUANTITATIVE RISK ASSESSMENT FOR PC MTBE PROPANE DEHYDROGENATION (PDH) PLANT PETRONAS FACILITY USING DNV SAFETI AND ALOHA SOFTWARE. [Final Year Project] (Submitted)

TAN, GARY YIH LUEN (2023) FABRICATION AND CHARACTERIZATION OF UZM-5/POLYSULFONE MIXED MATRIX MEMBRANE FOR CO2 /CH4 GAS SEPARATION. [Final Year Project] (Submitted)

TAN, YONG ZHEN (2023) POLYSTYRENE WASTE-DERIVED MEMBRANES FOR CO2/CH4SEPARATIONS: OPTIMIZATION OF OPERATING CONDITIONS. [Final Year Project] (Submitted)

THINAKARAN, RHESIKA (2023) SIMULATION THE ADSORPTION CAPACITY OF CARBON BASED-ADSORBENTS TOWARDS HEAVY METALS FROM WASTEWATER USING MACHINE LEARNING. [Final Year Project] (Submitted)

Timothy, Gladys Calvina (2023) Automated Targeting Modeling for Optimal Water System Design Considering Water-Carbon Nexus. [Final Year Project] (Submitted)

U

UTUMBER SINGH, NAVINJEET KAUR (2023) APPLICATION OF CHITOSAN-BASED RUBBER SEED SHELL ACTIVATED CARBON ON REMOVAL OF Pb2+, Cd2+, OIL AND GREASE. [Final Year Project] (Submitted)

V

Vasuthevan, Loshini (2023) Utilizing Microalgae Biomass as a Source of Biofertilizer to Grow Agriculture Plant. [Final Year Project] (Submitted)

W

WONG, BERLINDA WEI WEI (2023) SULFONATED POLY (ETHER ETHER KETONE) MEMBRANE IMPREGNATION BY IONIC LIQUID IN DEIONIZED WATER FOR H2 PRODUCTION. [Final Year Project] (Submitted)

WONG, WEI HAN (2023) OPTIMIZATION OF METHANOL INDUCED IONIC LIQUID IMPREGNATED SPEEK FOR PEM. [Final Year Project] (Submitted)

WOO, KAI TONG (2023) CO-COMPOSTING OF BLACK SOLDIER FLY (BSF) FRASS FOR HIGH VALUE ORGANIC FERTILIZERS. [Final Year Project] (Submitted)

WAN USAMAH, WAN AMIRATUL FAIZA (2023) PALM OIL WASTE TORREFACTION USING FLARE GAS. [Final Year Project] (Submitted)

Y

Yi Ni, Celestine Wong (2023) Optimization of Ethylene Oxide Production via Hydrogen Peroxide Process Route. [Final Year Project] (Submitted)

YAP, HUI YING (2023) ASSESSMENT OF PRE-TREATMENT TECHNOLOGIES FOR THE RECOVERY OF PROTEIN FROM MICROALGAE. [Final Year Project] (Submitted)

YUSOFF, IZZAH SYAHIRAH (2023) SPEEK-SILICA PROTON EXCHANGE MEMBRANE FOR WATER ELECTROLYSIS. [Final Year Project] (Submitted)

Yi Tong, Amanda Yap (2023) Development of PVDF-HFP Silica Superomniphobic Membrane for CO2 Capture in Membrane Gas Absorption. [Final Year Project] (Submitted)

Z

ZULKIFLI, MUHAMMAD FAIZ (2023) ENHANCEMENT OF HYDROGEN TITANATE NANOTUBES (HTNT) ADSORPTION OF METHELYNE BLUE (MB) BY USING MULTI WALLED CARBON NANOTUBES (MWCNT): A KINETIC STUDY. [Final Year Project] (Submitted)

Zaidi, Muhammad Nuralif Aliman (2023) FOODIEMIX (RESTAURANT SUGGESTER APPLICATION). [Final Year Project] (Submitted)