Browse by Type

RAMUTHI, DANESH (2020) COMPARATIVE PETROGRAPHIC ANALYSIS OF THE KUBANG PASU AND BARAM DELTA SANDSTONE. [Final Year Project] (Submitted)

HADI, HASNUL (2020) PREDICTION OF FLUID LOSS AND RHEOLOGICAL PROPERTIES OF WATER-BASED DRILLING FLUID USING MULTIPLE MACHINE LEARNING ALGORITHMS. [Final Year Project] (Submitted)

PARAMA GIRI, JAYESH GIRI (2020) ` IMPACT OF ECCENTRIC ANNULUS ON CUTTING TRANSPORT. [Final Year Project] (Submitted)

HAMZAH, NATASYA NADIA (2020) SIMULATION STUDY OF HYBRID LOW SALINITY WATERFLOOD WITH WATER ALTERNATING GAS FOR WAXY CRUDE OIL RECOVERY. [Final Year Project] (Submitted)

THIRUNANASAMBANTHAM, KANNIGAH (2020) IMPACT OF DRILL-PIPE ROTATION ON CUTTING TRANSPORTATION. [Final Year Project] (Submitted)

JEFFRI, SYAZA IZZATY (2020) WAX DEPOSITION STUDY USING PALM OIL INHIBITORS. [Final Year Project] (Submitted)

ABDUL AZIZ, MUHAMAD IZZAT IMRAN (2020) THE LABORATORY INVESTIGATION OF THE EFFECT OF BRINE SALINITY, ALPHA-OLEFIN SULFONATE (AOS) – TRITON X-100 (TX-100) SOLUTION CONCENTRATION IN CREATING WINSOR TYPE-III MICROEMULSION. [Final Year Project] (Submitted)

BINTIL LATIF ABDULLAH, FATIN SHAMIMI (2020) ASPHALTENE DEPOSITION PREVENTION USING PROSPER SIMULATION. [Final Year Project] (Submitted)

KIMBERLY, CHEAH BEE LIAN (2020) EVALUATING THE POTENTIAL OF OKRA MUCILAGE AS CORROSION INHIBITOR IN DIFFERENT CORROSIVE ENVIRONMENT. [Final Year Project] (Submitted)

KALANA, MOHAMMAD WAN HAZIQ (2020) FLOW ASSURANCE: POLYMERIC INHIBITOR FOR WAXY CRUDE OIL. [Final Year Project] (Submitted)

Perumal, Roshen (2020) FRAMEWORK FOR EFFECTIVE SAFETY COMPLIANCE IN CONSTRUCTION PROJECTS. [Final Year Project] (Submitted)

Zhi Fu, Joidan Lau (2020) Prediction of Moisture Content Removal from Sludge by Artificial Neural Network Modelling. [Final Year Project] (Submitted)

AHMAD TAJUDDIN, IFFAH NADHIRAH (2020) SAFETY PRACTICES FRAMEWORK FOR CONSTRUCTION PROJECT OF UNDERGROUND KVMRT STATION. [Final Year Project] (Submitted)

Abdelaziz, Abdelaziz Abdelmahmoud (2020) Life Cycle Cost Analysis (LCCA) for Sustainable Construction Projects: BIM Application. [Final Year Project] (Submitted)

Tan , Vi Nie (2020) Efficient Numerical Modelling of Extreme Wave. [Final Year Project] (Submitted)

Kian Hong, Anderson Chan (2020) Effects of Graphene on Mechanical Properties of Geopolymer Concrete. [Final Year Project] (Submitted)

NARUDDIN, MUHAMMAD AMIRUL HAQIMI (2020) The Impact of Urban Watershed to Hydrological Performance with The Presence of Bioretention System. [Final Year Project] (Submitted)

Zainal Abidin, Siti Yusrina (2020) The Investigation on The Effect of Vehicles Speed to The Pavement Performances of Malaysian Road. [Final Year Project] (Submitted)

Mahaletchumanan, Uthaiya Prakala (2020) Use of a Floating Breakwater in the Erosion Control at Coral Beach, Pangkor Island. [Final Year Project] (Submitted)

Yahia El-Tayeb, Hannad Mohamed (2020) STUDENT PERFORMANCE ANALYZATION AND VISUALIZATION. [Final Year Project] (Unpublished)

ASOGAN, ARVIN KUMAR (2020) AUTOMATED NEWS CLASSIFICATION USING MACHINE LEARNING. [Final Year Project] (Submitted)

Dev Kumar, Shavein Kumar (2020) Online Voting Systems In Student Led Organizations. [Final Year Project] (Submitted)

Kamarulan, Muhamad Ikhwan (2020) AUGMENTED REALITY (AR) MOBILE APPLICATION FOR PERFORMING ARTS PROMOTION. [Final Year Project] (Submitted)

ROSMADI, AHMAD AMIRUL ASRAF (2020) SALES ENHANCEMENT IN AGRICULTURE INDUSTRIES USING MOBILE APPLICATION. [Final Year Project] (Submitted)

Silvaraju, Menakah (2020) Hire Trusted Professionals and Freelances for Any Services: Mobile Application. [Final Year Project] (Submitted)

PALANIYAPPAN, YUMAREN (2020) SPORTS FACILITY BOOKING SYSTEM. [Final Year Project] (Submitted)

DANASAKARAN, KANI SELVAN (2020) PROPERTY RENTAL E-COMMERCE WEB-BASED SYSTEM WITH TENANT MANAGEMENT SOLUTION. [Final Year Project] (Submitted)

ISKANDAR DZULKERNAIN, ROSMILI (2020) PETROL STATION SALES DASHBOARD USING MICROSOFT POWER BI. [Final Year Project] (Submitted)

CHOONG, ZE BIN (2020) Song Genre Classification Based On Lyrics. [Final Year Project] (Submitted)

Nguyen, Tran Thanh Loc (2020) Recommendation System in E-house Mobile Application. [Final Year Project] (Submitted)

KHALID, MOHD NADZREE (2020) SMART ROLLER FOR LPG CYLINDER. [Final Year Project] (Submitted)

Francis Xavier, Sam Daniel (2020) Development of a Raspberry Pi Drowsiness Detection System based on Histogram of Oriented Gradient (HOG) Algorithm and Eye Aspect Ratio (EAR) Formula. [Final Year Project] (Submitted)

YAP, SEE LING (2020) SMART PARKING SYSTEM FOR LARGE SCALE PARKING LOT. [Final Year Project] (Submitted)

CLEMENT, RACHEL SALLY (2020) SENTIMENT ANALYSIS TO CLASSIFY THE SENTIMENT OF STUDENTS’ FEEDBACK USING THE CLASSIFICATION METHOD IN R AND POWER BI. [Final Year Project] (Submitted)

Maniam, Vihashinii Maniam (2020) VISITOR TRACKING MOBILE APPLICATION FOR NON LANDED AREAS. [Final Year Project] (Submitted)

Surenthran, Priyaganessri (2020) Skin Type Classification using Machine Learning. [Final Year Project] (Submitted)

Hazlin, Mohamed Afiq (2020) Medical Image Processing: Chest X-Ray (COVID-19). [Final Year Project] (Submitted)

Radzuan, Muhammad Nafiss (2020) Fly Porter: A Mobile Application for Crowd-shipping. [Final Year Project] (Submitted)

AZHAR, AZNOL HANIM (2020) APPLYING GAMIFICATION IN MOBILE APPLICATION TO REDUCE SCREEN TIME. [Final Year Project] (Submitted)

MARATHA, LOGADARSHINNI (2020) THE DEVELOPMENT OF AN IOT PLATFORM THAT SUPPORTS COLLABORATIVE LEARNING IN PRIMARY SCHOOLS. [Final Year Project] (Submitted)

Ayob, Izzatunnuha (2020) SMART DRY MOWER ROBOT (Improvised version of lawn mower robot). [Final Year Project] (Submitted)

TUAN MOKHTAR, TUAN MOHD ALIF NAIM (2020) SMART ARTIFICIAL BAITING SYSTEM FOR GOLDEN APPLE SNAIL. [Final Year Project] (Submitted)

ROZAIMEE, NUR QURRATUL A’DLIAH (2020) Aggregation Method To Handle Big Data For Gas Compressor. [Final Year Project] (Submitted)

Mohammad, Ratna Mutiara (2020) Event Planning & Management System. [Final Year Project] (Submitted)

NOR AZELAN, NUR NABILAH (2020) E-GREEN: SMART MONITORING FOR CHILI GREENHOUSE SYSTEM. [Final Year Project] (Submitted)

MUSA, MUHAMAD NABIL (2020) PREDICTIVE ANALYTICS FOR OIL AND GAS ASSET MAINTENANCE USING XGBOOST ALGORITHM. [Final Year Project] (Submitted)

Ahmad Badardin, Mohamad Syahmin (2020) BRAND AND INDUSTRY COLOR DEFINER. [Final Year Project] (Submitted)

PRAKASAN, USHALINIE SELVI (2020) TWITTER MINING FOR NATURAL DISASTER RESPONSE. [Final Year Project] (Submitted)

MOHAMAD, AHMAD LUKMAN (2020) PREDICTING THE PRICE OF COTTON USING RNN AND LSTM. [Final Year Project] (Submitted)

ISMAIL, NAJIHAH (2020) COVFIT HEALTH MOBILE APPLICATION. [Final Year Project] (Submitted)

QUAH, MIN QI (2020) STUDENT’S PERFORMANCE PREDICTION USING EDUCATIONAL DATA MINING. [Final Year Project] (Submitted)

SAID MOHAMAD TAHIR, NOOR SAHID (2020) MOBILE INDOOR NAVIGATION (MOBION) APPLICATION. [Final Year Project] (Submitted)

CHOY, SHAO KEAT (2020) AUTOMATED STUDENT ACCOMMODATION BOOKING SYSTEM. [Final Year Project] (Submitted)

Mohd Shamim, Nur Farisha Shuhada (2020) Development of Technical Safety Dashboard Using Microsoft Power BI Integration with R. [Final Year Project] (Submitted)

Faizil, Fe Puteri Salsabila (2020) The Development of a Centralized Platform for Finding Tutor. [Final Year Project] (Submitted)

MUHAMMAD FATEH TEH, FAZIRA AMIRAH (2020) E-HR AUTOMATED RESUME ANALYSIS. [Final Year Project] (Submitted)

MAHADI, NURIKA THAQIFAH (2020) DATA CENTER THERMAL AND MOISTURE MONITORING SYSTEM WITH INTELLIGENT PREDICTION. [Final Year Project] (Submitted)

ISAM MUDDIN, NURUL AINUL AFIQAH (2020) FLOW TESTING TOOL FOR STUDENTS’ SOFTWARE PROJECT. [Final Year Project] (Submitted)

MOHD RUSLI, AMIRAH WAHIDAH (2020) CROWDSOURCING-BASED MOBILE APPLICATION FOR SUPERMARKET STOCK AVAILABILITY CHECKER. [Final Year Project] (Submitted)

AZMI, MUHAMAD AMIR IZZAT (2020) UTILIZING FEATURETOOLS IN AUTOMATICALLY CREATING FEATURE ENGINEERING. [Final Year Project] (Submitted)

HAMDAN, MOHAMAD SYAZMEE (2020) JOBL : A JOB LISTING WEBSITE. [Final Year Project] (Submitted)

Mohd Noor, Nur Amiera (2020) IMMERSIVE UPPER ARMS GAMES REHABILITATION FOR STROKE SURVIVOR. [Final Year Project] (Submitted)

Md Din, Nur Ain Fatehah (2020) ENHANCING UNIVERSITY WEBSITE ASSOCIATED WITH CHATBOT SYSTEM: UTP STUDY CASE. [Final Year Project] (Submitted)

Anuar, Nur Syazwani (2020) I-JOB: Job Search Platform for Internships Placement. [Final Year Project] (Submitted)

Syed Ridza, Syarifah Mudriqah Wafa (2020) Map Smash – Geography made fun. [Final Year Project] (Submitted)

Syed Adnan, Sharifah Natasya (2020) Hajj and Umrah Bot: Facilitating Queries by Pilgrims. [Final Year Project] (Submitted)

ZOOLKAFLI, FILIA AKASYA (2020) NUTRITION MONITORING MOBILE APPLICATION. [Final Year Project] (Submitted)

Osman, Muhammad Yasin (2020) ANALYTICS MODEL FOR PATIENT FORECASTING. [Final Year Project] (Submitted)

Md Sidi, Mohammad Syazwan (2020) Food Application for people with food allergy. [Final Year Project] (Submitted)

AZMAN, AUNI KHAIRINA (2020) MENTAL ARITHMETIC MOBILE APPLICATION FOR CHILDREN. [Final Year Project] (Submitted)

Mohd Am Jaid, Arfa Farheen (2020) FOODEGA: Mobile Food Management Application. [Final Year Project] (Submitted)

AMRAN, NIK NISA SORFIA (2020) SOCIAL DISTANCING MOBILE APPLICATION FOR VISUALLY IMPAIRED PEOPLE. [Final Year Project] (Submitted)

NASIR, ILYA KHALIJAH (2020) A GAME-BASED ACTIVITY TO DETECT IMPAIRED EMOTION RECOGNITION FOR POST STROKE PATIENTS. [Final Year Project] (Submitted)

MOHAMAD ISA, ANIS FARHANA (2020) DEVELOPMENT OF SMART ROOM USING ARDUINO. [Final Year Project] (Submitted)

MOHD KHAIRUDDIN, AMIR SYAHMI (2020) DEVELOPMENT OF USED ELECTRONICS E-COMMERCE MOBILE APPLICATION. [Final Year Project] (Submitted)

HOR, HOR (2020) MY VISION A MOBILE APPLICATION TO INCREASE SAFETY OF VISUALLY IMPAIRED PEOPLE. [Final Year Project] (Submitted)

Zaiful Anuar, Muhamad Zarif (2020) Data Analytics on student response via social media on the educational landscape (learning, experience, humanization) during the COVID-19 pandemic. [Final Year Project] (Submitted)

BYROSE KHAN, AINUL NAZRIYA (2020) DIGITAL COUNSELLING APPS USING CHATBOT FOR STUDENTS WITH DEPRESSION. [Final Year Project] (Submitted)

MUHAMAD BAIJURI, ZARITH NOR ATIQAH (2020) VIRTUAL REALITY SCIENCE LEARNING WEBSITE. [Final Year Project] (Submitted)

ISMAIL, NUR HIDAYAH (2020) DEEP LEARNING-BASED TRAFFIC LIGHT DETECTOR. [Final Year Project] (Submitted)

NOORHISHAM, MUHAMMAD SYAFIQ (2020) MOBILE APPLICATION FOR FATIGUE MANAGEMENT SYSTEM. [Final Year Project] (Submitted)

MORGAN, JAYASHIRY (2020) DepCare: Application to Detect and Treat Mild Depression. [Final Year Project] (Submitted)

Zulkifley, Muhammad Dzofir Hafiz (2020) Bundle Sorting Mobile Application. [Final Year Project] (Submitted)

Tan, Vi Nie (2020) Efficient Numerical Modelling of Extreme Waves. [Final Year Project] (Submitted)

Za’im, Muhammad Hafizuddin (2020) Driver Drowsiness Detection Using Wearable Pulse Sensor. [Final Year Project] (Submitted)

Faizul Hilmy, Muhamad Hanis (2020) Design and Implementation of Hybrid Renewable Energy System Using DFIG and Multilevel Inverter. [Final Year Project] (Submitted)

Muhammad Zamzuri, Nur Nabila Ashykin (2020) Virtual Environment for Training and Skill Enhancement for Offshore Workers. [Final Year Project] (Submitted)

Zakaria, Nadzmi Zarith (2020) Design and Modelling the System for Ablution Recycle Water. [Final Year Project] (Submitted)

R Ravdarn, Roeshan (2020) Development of Upper Limb Exoskeleton. [Final Year Project] (Submitted)

Kanesan, Thivagar (2020) Classification Of EEG Imagery Motor Function Using 3D Convolutional Neural Network. [Final Year Project] (Submitted)

Asfaazam, Eekroq (2020) Self-Inflated Barrier for Flood Protection with Water Level Monitoring by Internet of Things (IoT). [Final Year Project] (Submitted)

Mohd A’azmi, Muhammad Haziq 'Irfan (2020) IoT Based Battery Car Level. [Final Year Project] (Submitted)

Wee, Joel Hong Shen (2020) Crowd Real Time Video Classification, Count and Flow. [Final Year Project] (Submitted)

Khalid, Abdullah (2020) STUDY OF BEHAVIOUR-BASED NAVIGATION FOR INDOOR MOBILE ROBOT. [Final Year Project] (Submitted)

Ab Ghafar, Muhamad Badrul Amin (2020) Development of Vibration Energy Harvesting for Drone Application. [Final Year Project] (Submitted)

POR, KIA JUN (2020) PORE PRESSURE PREDICTION USING 2D BASIN MODELLING TECHNIQUE. [Final Year Project] (Submitted)

DAUD, MOHD AMIRUDDIN (2020) Fluvial System Characterization of Group I, Field Y, Malay Basin, Offshore Malaysia. [Final Year Project] (Submitted)

ABDULLAH MUTHANNA EL-BADAJI, ABDULLAH ALI (2020) Hydrocarbon Potential Identification Using AVO Attribute and Seismic Inversion Method. [Final Year Project] (Submitted)

ABDUL TAIB, AMIRUL AZIZI (2020) Characterization of the Group I Fluvial System in X Field, Malay Basin. [Final Year Project] (Submitted)

Hasan, Muhammad Saifullah (2020) MAJOR FAULT AND CHANNELS DETECTION IN ANGSI FIELD. [Final Year Project] (Submitted)

Mohd Rasdi, Maryam Sofia (2020) A REVIEW OF ROCK AGGREGATE INDUSTRY IN MALAYSIA AND ITS SUSTAINABILITY. [Final Year Project] (Submitted)

ABU BAKAR, MUHAMMAD MUKHLIS (2020) Petrophysical Evaluation of some selected carbonate reservoir from X fields offshore, Sarawak, Malaysia. [Final Year Project] (Submitted)

TANG, PANG NENG (2020) EFFECTS OF WAVE PERIOD ON WAVE TRANSMISSION AND REFLECTION FOR AN ARRAY OF GEOTUBE. [Final Year Project] (Submitted)

Hashim, Muhammad Hafifi (2020) Application of Electrical Resistivity Imaging in Characterizing Surface Seepage and Geologic Heterogeneity in UTP Campus. [Final Year Project] (Submitted)

SEVOO, THENESH (2020) Geochemical Analysis And Wettability Characterisation Of Nanoparticle-Surfactant Aged Black Shales From Sungai Perlis Bed, Terengganu With Salinity Variations. [Final Year Project] (Submitted)

MOHD ZULKIFLI, NUR FARAH LIYANA (2020) Sweet Spot Evaluation on Low Resistivity Low Contrast Reservoir Using Rock Physics and Seismic Inversion. [Final Year Project] (Submitted)

Ahmad Husam, Muhammad Azzam (2020) SEISMIC GEOMORPHOLOGY AND WIRELINE CALIBRATION OF FIELD X, CENTRAL LUCONIA, OFFSHORE SARAWAK. [Final Year Project] (Submitted)

Mohd Fazli, Nur Aina Nabilah (2020) Stratigraphic Framework of FXY Miocene Carbonates Field, Central Luconia. [Final Year Project] (Submitted)

ABDUL RAHMAN, MUHAMMAD (2020) Seismic Facies Interpretation of Merrimelia-Innamincka Block, Cooper-Eromanga Basin, Australia Using Machine Learning. [Final Year Project] (Submitted)

ZAINUDIN, ARIEF ASYRAF (2020) Porosity Studies and Diagenetic Effects on Reservoir Quality in Field FX. [Final Year Project] (Submitted)

KHALILI, MUHAMMAD FITRI (2020) Porosity and Permeability Analysis of Miocene Carbonate Reservoirs Using Well Data. [Final Year Project] (Submitted)

MORZANI, MARINA (2020) RESERVOIR QUALITY DETERMINATION OF FX FIELD, CENTRAL LUCONIA, SARAWAK. [Final Year Project] (Submitted)

Deng Manguen, Samuel Yuol (2020) Water Saturation Estimation Using Seismic Inversion and Neural Networks in S Field, Malay Basin. [Final Year Project] (Submitted)

FAHRURAZI, MOHD AMIRUL FAISAL (2020) Comparative Facies Metrics Analysis between Modern Holocene Carbonate Platforms and Ancient Carbonate of KX Field in Central Luconia, Offshore Sarawak. [Final Year Project] (Submitted)

ZUHAIME, MUHAMMAD AKMAL (2020) Geophysical investigation in Perak by using satellite gravity data. [Final Year Project] (Submitted)

Guest, Aaron William (2020) Parametric Study on Dynamic Analysis of Steel Beams and their Mode Shapes-Numerical Simulations. [Final Year Project] (Submitted)

Hasani, Siti Sarah (2020) Erosion Susceptibility Mapping using GIS and MCDM: A case study in Kelantan. [Final Year Project] (Submitted)

Nyombe, Daniel Loro Mori (2020) Low Gas Saturation Response on Seismic, through Rock Physics and Forward Modelling. [Final Year Project] (Submitted)

ALZAHRI, NUR IZZAH AHIRAH (2020) Facies Identification and Reservoir Quality Determination of Field FX-2, Central Luconia. [Final Year Project] (Submitted)

DAMAN HURI, MUHAMMAD ALIFF LOQMANN (2020) Geophysical Investigation in Kedah by Using Land Gravity Data. [Final Year Project] (Submitted)

BALA SUBRAMANIAM, RISHIKA (2020) Geology and Deformation of Pos Betau-Sungai Koyan area, Pahang. [Final Year Project] (Submitted)

ABDUL RAHIM, (NURUL HIKMAH (2020) Petroleum System Elements Investigation Lambir Forest with emphasis of Sedimentology and Stratigraphy Frameworks (Section I). [Final Year Project] (Submitted)

SAHIMI, NUR ADRIANA (2020) Geophysical investigation in Selangor by using satellite gravity data. [Final Year Project] (Submitted)

BASTIAN, BENJAMIN MARK (2020) Lithostratigraphy and Palaeontology of the Carboniferous‐Permian Singa Formation at Pulau Langkawi (Kedah). Sector 1 (Jalan Temoyong [road 116], East of Pantai Tengah). [Final Year Project] (Submitted)

ROSLI, NADIAH (2020) The Characterisation of Karst from Seismic Interpretation of a Miocene Carbonate Build Up of FX Field, Central Luconia Sarawak Malaysia. [Final Year Project] (Submitted)

MASTOR, AMIR RAZIQ (2020) Seismic Hazard Analysis of Putrajaya Area Using PSHA Method. [Final Year Project] (Submitted)

S. Danapalan, Vaishnavi (2020) AVO Analysis on High Pressure, High Temperature Reservoir for Identification of Potential Hydrocarbon in Malay Basin. [Final Year Project] (Submitted)

SATHIAVELU, SRIMANIMEGALA (2020) Impact Of Shale Minerology On Their CO2/CH4 Adsorption Capacity And Selectivity at Field Conditions: Isotherm Modelling Study. [Final Year Project] (Submitted)

Raja Kumar, Bawaa Tharaaneey (2020) Study On The Effect Of Clay Content On The Elastic & Electrical Properties: Case Study On Field Y. [Final Year Project] (Submitted)

SIMAH, RUFAIDAH (2020) Fracture Analysis Using Wireline Log and Core Data of Field FX-2, Central Luconia Province, Sarawak. [Final Year Project] (Submitted)

WAN MOKHTARAM, WAN MUHAMMAD NAUFAL (2020) Geophysical Characterization of Groundwater Aquifers in the Raya Valley (Perak) Fractured Basement. [Final Year Project] (Submitted)

KHAW, HWEE JIN (2020) PREDICTION AND CHARACTERIZATION OF RESERVOIR FACIES USING SEISMIC ATTRIBUTES. [Final Year Project] (Submitted)

CHOONG, CHEE MENG (2020) Geology and Deformation of Pos Blau area, Kelantan. [Final Year Project] (Submitted)

HAIRI, MOHAMAD HAFIZZI (2020) Seismic Hazard Analysis of Klang Area using Probabilistic Seismic Hazard Analysis (PSHA) Method. [Final Year Project] (Submitted)

ABDUL RASHID, MOHAMMAD IMRAN (2020) Probabilistic Seismic Hazard Analysis (PSHA) in Kinta Valley area using SEISAN and R-Crisis Software. [Final Year Project] (Submitted)

SENDERASEGAR, JEYEHNDEREN (2020) EXPERIMENTAL STUDIES OF FRACKING FLUID ADSORPTION ON BLACK SHALE OF VARIOUS PROPERTIES. [Final Year Project] (Submitted)

Md Jamil, Mohamad Firdaus (2020) SEDIMENTOLOGY OF NENERING BASIN (SOUTHERN THAILAND). [Final Year Project] (Submitted)

SHAHRIN, MUHAMMAD ALIF HAZEEQ (2020) Seismic Hazard Analysis of Kuala Muda using PSHA Method. [Final Year Project] (Submitted)

Tew, Poh Qing (2020) THERMAL CONDUCTIVITY AND OVERPRESSURE PREDICTION BASED ON WELL LOG DATA ANALYSIS AND SEISMIC CORRELATION. [Final Year Project] (Submitted)

Ahmad Mazhar, Aina Nasuha Fizawan (2020) STRUCTURAL SEISMIC ATTRIBUTE ANALYSIS: FAULTS AND SUBSEISMIC FAULTS STUDY OF MERRIMELIA-INNAMINCKA BLOCK, COOPER-EROMANGA BASIN, SOUTH AUSTRALIA. [Final Year Project] (Submitted)

Zakaria, Fatin Izzati (2020) AVO ANALYSIS AND MODELING FOR PREDICTING HYDROCARBON IN Q FIELD, MALAY BASIN. [Final Year Project] (Submitted)

RINAI JAFFREY, NICOLE (2020) Petroleum System Elements Investigation of Lambir Forest Area (Section II) with Emphasis on its Sedimentology and Stratigraphy. [Final Year Project] (Submitted)

MOHD KHAIRY, WAN IZALEA DAYANA (2020) Physicochemical Characterization of Groundwater Aquifer in Raya Valley (Perak) Fractured Basement. [Final Year Project] (Submitted)

CHANDRU, HUGGANESH (2020) Gas Adsorption Characteristics of Bendang Riang Formation using Co2. [Final Year Project] (Submitted)

HAMDAN, MUHAMMAD AMIR FAISAL (2020) Study On Velocity – Resitivity Response And Its Relationship With Depth On Y-Field. [Final Year Project] (Submitted)

Mohd Hasni, Amirul Danial (2020) Geochemical Characterization of some Black Shale, Malay Basin. [Final Year Project] (Submitted)

KENYI BATA, SAMUEL JUSTIN (2020) Petrophysical Evaluation and Flow Units of Some Clastics, X Field, Malay Basin. [Final Year Project] (Submitted)

TAHIR, MUHAMMAD ZAKI (2020) Carbonate microfacies and pore types characterization of tight layers interval in EX field, Central Luconia, offshore Sarawak. [Final Year Project] (Submitted)

E.M. Balakrishan, (Arwin Fogarty (2020) Geochemistry of Dolostone in Kinta Valley Gunung Rapat Area, Perak, Malaysia. [Final Year Project] (Submitted)

ZUBIR, MUHAMMAD AMIRUL AKMAL (2020) Study of Faults and Various Depositional Features of Miocene Platform Field X, Central Luconia Province. [Final Year Project] (Submitted)

R.SELVANDRAN, VIKNESH (2020) OPTIMIZATION AND EVALUATION OF POLYMERSURFACTANT BASED FRACKING FLUID FOR FRACTURE PROPAGATION IN BLACK SHALES. [Final Year Project] (Submitted)

Uthayakumar, Tineswaran (2020) Impact of Polymer Enhanced Foam based Fracking Fluid on the Geochemical Properties of Black Shale for Hydrocarbon. [Final Year Project] (Submitted)

ZAINAL ABIDIN, NURUL ARINA (2020) Lithology and Palaeontology of The Carboniferous Permian Singa Formation at Pulau Langkawi (Sector 3 – Taman Helang Perdana, West of Kuah). [Final Year Project] (Submitted)

KANESEN, KAMALARASAN (2020) Influence of Temperature, Pressure and Salinity on Rock-Fluid Interfacial Interactions of Marcellus Shale. [Final Year Project] (Submitted)

MOHAN, PRASANA (2020) Physico-Chemical properties of Riverine Water in the Raya Valley, Perak. [Final Year Project] (Submitted)

VEGIA KUMAR, REYHAN (2020) SHALE GAS MATHEMATICAL MODELLING OF GAS DIFFUSIVITY BY CARBON DIOXIDE IN MARCELLUS SHALES. [Final Year Project] (Submitted)

KAMIS, NUR ASYIKIN (2020) Microfacies Analysis of the Field FX, Central Luconia Province, Sarawak. [Final Year Project] (Submitted)

JALOK, NUR ZARIFAH (2020) Application of Spectral Decomposition to Predict Reservoir Distribution of Field Y, Malay Basin. [Final Year Project] (Submitted)

KRISHNAN, KISHAAN GOPAL (2020) SITE INVESTIGATION OF SHALLOW BEDROCK WITH INTEGRATED GEOPHYSICAL SURVEY. [Final Year Project] (Submitted)

MORZANI, MARINA (2020) RESERVOIR QUALITY DETERMINATION OF F23 FIELD, CENTRAL LUCONIA, SARAWAK. [Final Year Project] (Submitted)

MOHAMED ARIFF, MUHAMAD ANIQ AIMAN (2020) Geology and Deformation of Gua Musang area, Kelantan. [Final Year Project] (Submitted)

MOHD YAZID, MUHAMAD SYAHME FARHAN (2020) Structural Characterization of Groundwater Aquifers in the Raya Valley (Perak) Fractured Basement. [Final Year Project] (Submitted)

AEDI, ARIF (2020) Geology and Deformation of East Ringlet area, Pahang. [Final Year Project] (Submitted)

DAMIAN ABA, SHAMIRUL AZIZI ABA (2020) THE STUDY ON DEPOSITIONAL ENVIRONMENT IN “Y” FIELD BASED ON LOG MOTIFS CHARACTERISTICS AND ITS LINK WITH THE ELASTIC AND ELECTRICAL PROPERTIES. [Final Year Project] (Submitted)

ALI, MUHAMAD NABBIL (2020) GEOPHYSICAL INVESTIGATION IN PAHANG BY USING SATELLITE GRAVITY DATA. [Final Year Project] (Submitted)

Raj Kumar, Kuganesh Kumar (2020) High Temperature High Pressure (HTHP) Reservoir Characterization Using Simultaneous Seismic Inversion in Field “X” of Malay Basin. [Final Year Project] (Submitted)

Sulaiman, Aliza Sharina (2020) Sentiment Analysis of Cyberbullying in Social Media Using Decision Trees. [Final Year Project] (Submitted)

Mohamad Faiz, Nuwairah Ilham Putri (2020) Framework for Quality Management System for Safety Compliance Implementation in Construction Projects. [Final Year Project] (Submitted)

Ray Louis, Vicmark Richard (2020) EVALUATION OF ADSORPTION PROCESS USING AGRICULTURAL WASTE USING RSM IN REMOVAL OF ORGANIC POLLUTANTS FROM PRODUCED WATER. [Final Year Project] (Submitted)

Mior Hanapi, Mior Amirul Azam (2020) Life Cycle Cost Analysis of Highway Project. [Final Year Project] (Submitted)

Suleiman, Nur Aqilah (2020) NUMERICAL SIMULATION OF FLOW PARAMETERS THROUGH SUBSURFACE DRAINAGE MODULE SYSTEM. [Final Year Project] (Submitted)

THOOY, KOK YAW (2020) NUMERICAL AND PARAMETRIC STUDY ON THE GEOPOLYMER CONCRETE CORE IN COMPOSITE SANDWICH SECTION. [Final Year Project] (Submitted)

Eng, Zhen Qin (2020) Developing Economic Performance of Transportation Facilities in Tourism Area (Case Study: Ipoh Train Station). [Final Year Project] (Submitted)

Amirudin, Ashikin Mastura (2020) AN ANALYTICAL STUDY ON THE TENSIONAL INTEGRITY OF AN EXISTING DIAGRID STRUCTURAL SYSTEM. [Final Year Project] (Submitted)

Ahmad, Niraku Rosmawati and Mohd Marzuki, Siti Nuruljannah (2020) Experimental Study: Geotechnical Properties of Uncemented Sandstone at Kati Formation, Seri Iskandar, Perak.‎. [Final Year Project] (Submitted)

Ng , Jia Yi (2020) Nutrient Removal in the Treatment of Batik Wastewater using Bench-Scale Sequencing Batch Reactor (SBR) System. [Final Year Project] (Submitted)

Abdul Rahman, Nurul Liyana ‘Izzati (2020) Laboratory Experiment To Determine Major Factors Controlling Landslides Triggered by Rising of Ground Water Level. [Final Year Project] (Submitted)

Badrul Hisham, Shameen Miriam (2020) Feasibility Analysis of Mooring Systems for Floating Offshore Solar Farm (FOSF) Considering Environmental Impacts. [Final Year Project] (Submitted)

Ng , Weng Jie (2020) Extreme Loads on Jacket Structures : Effect of Higher Order Linearities and Momentum Flux Formulation. [Final Year Project] (Submitted)

Md Nasir, Nurul Amira Amalina (2020) CONSTRUCTED WETLAND SYSTEM FOR PEAT SOIL ECOSYSTEM RESTORATION AND WATER QUALITY ANALYSIS. [Final Year Project] (Submitted)

MD NASIR, NURUL AMIRA AMALINA (2020) CONSTRUCTED WETLAND SYSTEM FOR PEAT SOIL ECOSYSTEM RESTORATION AND WATER QUALITY ANALYSIS. [Final Year Project] (Submitted)

ISMAIL MUBARAK, AHMAD SYAWAL IDDIL (2020) HEALTH AND SAFETY FOR INFRASTRUCTURE PROJECTS: PPE ADAPTATION. [Final Year Project] (Submitted)

ABD HALIM, MUHAMMAD HAZIQ HAZIM (2020) MODELLING FOR SOIL EROSION AND RIVER SUSPENDED SEDIMENT. [Final Year Project] (Submitted)

MD RIZA, FARAH NABILAH (2020) HIGHEST AND BEST USE ANALYSIS FOR REDEVELOPING THE ECONOMICAL SUSTAINABLITY OF HIGH-RISE BUILDING. [Final Year Project] (Submitted)

Husnuddin, Aida Sofea Nurina (2020) Numerical Simulation of Directional Wave Hydrodynamic Forces: A Study of Surface Roughness. [Final Year Project] (Submitted)

Mohd Zahid, Muhammad Afiq Aiman (2020) Dynamic Response Analysis of FPSO With Damaged Mooring Line And Multiple Damaged Mooring Lines. [Final Year Project] (Submitted)

Ruslan, Amirul Afiq (2020) Developing Value Based Decision-Making Model for Selecting Sustainable Material for Building. [Final Year Project] (Submitted)

Mahindran, Kumeerthaasree (2020) Computational Modeling of Bacteria in Bioremediation of Oil in Lumut Seawater using Lattice Boltzmann Method. [Final Year Project] (Submitted)

PAT, KAR SENG (2020) EXPERIMENTAL AND ANALYTICAL STUDY ON STRUCTURAL BEHAVIOR OF GEOPOLYMER SANDWICH COMPOSITE BEAM. [Final Year Project] (Submitted)

MUHAMMAD HISHAM, MUHAMMAD SAID FARHAN (2020) APPLICATION OF BIOCHAR FOR TREATMENT OF PRODUCED WATER. [Final Year Project] (Submitted)

Santhanasamy, Rickey (2020) Investigation on the Mechanical and Morphological Properties of Regular and Irradiated Waste PET Modified Asphaltic Concrete Mixtures. [Final Year Project] (Submitted)

Santhanasamy, Rickey (2020) Investigation on the Mechanical and Morphological Properties of Regular and Irradiated Waste PET Modified Asphaltic Concrete Mixtures. [Final Year Project] (Submitted)

Zulkiflee, Muhammad Hilman (2020) Life Cycle Cost Analysis (LCCA) on Excavators for Earthwork (Excavation and Earthmoving) in a Highway Project. [Final Year Project] (Submitted)

Tidan, Deirdre Rinai (2020) Study On The Mechanical Performance Of Normal Concrete Due To Inclusion Of PVA Fibers And Silica Fume. [Final Year Project] (Submitted)

Wee Yeong, Brennan Xiang (2020) ANALYSIS OF CORROSION RATES ACROSS VARIOUS WATER DEPTHS IN MALAYSIA TOWARDS THE IMPACT OF INTEGRITY ON OFFSHORE STRUCTURE. [Final Year Project] (Submitted)

Zambre, Aleesya Ellanie (2020) Rainwater Harvesting System for Generating Green Energy – Numerical Modelling. [Final Year Project] (Submitted)

Yeoh, Jun Xiang (2020) Heat treatment of sludge and encapsulation into building blocks. [Final Year Project] (Submitted)

Selvaraju, Durgashini (2020) Lifting Analysis of an Offshore Bridge Structure that Connects Two Platforms. [Final Year Project] (Submitted)

Idris, Syaheera (2020) ii Comparative Assessment of Offshore Platforms as Artificial Reefs: Study of Sea Current, Sea Surface Temperature, and Water Depth in Malaysia. [Final Year Project] (Submitted)

Yenn, Loo Chi (2020) Investigating the effects of graphene nanoplatelets on the mechanical properties of Engineered Cementitious Composite. [Final Year Project] (Submitted)

Ng, Yee Yong (2020) Shoreline Mapping of Teluk Nipah Using Digital Shoreline Analysis System (DSAS) in ArcGIS with Tidal Correction. [Final Year Project] (Submitted)

Loganathan, Kamalesh Reddy (2020) Chemical Resistivity of Rubberized Concrete with Steel Tire Wire. [Final Year Project] (Submitted)

Kong , Jian Fang (2020) CORROSION EFFECT ON INTEGRITY OF EXISTING OFFSHORE FIXED PLATFORM. [Final Year Project] (Submitted)

Mohd Shamsul, Muhammad Amzar Hareez (2020) SPATIAL MODELLING OF FLOOD SUSCEPTIBILITY IN KELANTAN USING GIS AND RANDOM FOREST MACHINE LEARNING. [Final Year Project] (Submitted)

ROSMAN, MUHAMMAD SHAKYR (2020) Developing decision support system to redevelop urban facilities (cultural heritage). [Final Year Project] (Submitted)

Azmi, Nurbazilah (2020) Framework for Effective Time Management Towards Safety Compliance in Construction Project. [Final Year Project] (Submitted)

Nasa Radzie, Dayana Nabilah (2020) Hydraulic Analysis of Floating Rubbish in Sungai Lumut Kiri with HEC-RAS. [Final Year Project] (Submitted)

SELVANATHAN, ALAN APOSTLER (2020) Experimental Study on the Effect of Mooring Line Failure on the Hydrodynamic Behaviour of Spread Moored FPSO. [Final Year Project] (Submitted)

Wong, Kai Wing (2020) Important Factors of Automated Monitoring of Quality and Quantity in Construction Projects. [Final Year Project] (Submitted)

Vincent, Sharvin (2020) FLEXURAL AND TENSILE STRENGTH OF RUBBERIZED CONCRETE WITH STEEL TYRE WIRE. [Final Year Project] (Submitted)

Iskandar Fitri, Muhammad Affif (2020) Life-Cycle Cost Analysis Comparison on Power Generation Based on Natural Gas and Photovoltaic Modules. [Final Year Project] (Submitted)

LEE , XIN YANG (2020) Integrated IBS Model for BIM Environment: Embodied Carbon Analysis. [Final Year Project] (Submitted)

AHMAD, SYAHMI (2020) THE INTERACTION OF ACTIVITY TRAVEL PATTERN, BUILT ENVIRONMENT AND AFFECTIVE EXPERIENCED ON SOCIAL HEALTH. [Final Year Project] (Submitted)

Wan Muhaimin, Wan Farra Ayesha (2020) New Method of Construction in Industrialised Building System. [Final Year Project] (Submitted)

Soo, Neng Wu (2020) Landslide susceptibility modelling using GIS and Random Forest Machine Learning. [Final Year Project] (Submitted)

Palaniappan, Pavitirakumar (2020) Techno Economic Analysis of Offshore Wind Turbine in Kudat, Sabah Malaysia. [Final Year Project] (Submitted)

Thanapal, Praveena (2020) Investigation on Performances and Characteristic of PCM Modified Mastic. [Final Year Project] (Submitted)

Lau, Jia Shen (2020) Evaluation on New Natural Coagulant Aid in Water Treatment and its Life Cycle Assessment. [Final Year Project] (Submitted)

Wong, Dai Le (2020) Organics Removal in the Treatment of Batik Wastewater using Bench-Scale Sequencing Batch Reactor (SBR) System. [Final Year Project] (Submitted)

Kuan, Wei Sam (2020) The Interaction of Activity-Travel Pattern, Built Environment and Active Transport on Physical Health. [Final Year Project] (Submitted)

Liew, Zhen Shen (2020) Renewable Energy from Osmosis: Design and Model Pressure Retarded Osmosis System. [Final Year Project] (Submitted)

Daniel, Dylan Au (2020) FLOW SIMULATIONS OF PIPELINE WITH VARYING DIAMETERS. [Final Year Project] (Submitted)

Shemar, Jay Anil Singh (2020) Keyphrase Generation with Recurrent Neural Network and Attention Model. [Final Year Project] (Submitted)

Thiyagarajan, Harvint Raj (2020) HAPPY : A MOBILE APPLICATION TO AID MENTAL HEALTH. [Final Year Project] (Submitted)

Robert, Sri Santha Smrity (2020) Smartphone Aid: Widget Application for Elderly People. [Final Year Project] (Submitted)

Mohd Fakhri, Nur Aliaa Syaza (2020) Automation Process of Data Entry Using Robotic Process Automation. [Final Year Project] (Submitted)

Asnul, Hanisha (2020) GRADMe: Reengineering the Graduation Clearance Workflow with an Online System. [Final Year Project] (Submitted)

Abdul Halim, Muhammad Mustaqim (2020) Garbage Bin Monitoring System using GSM. [Final Year Project] (Submitted)

Ridza, Aida Aiman (2020) The Development of a Key Performance Indicator for Academic Lecturer’s Performance Assessment. [Final Year Project] (Submitted)

Han, Lin Zaw (2020) INTERACTIVE WORKLOAD TRACKING SYSTEM. [Final Year Project] (Submitted)

Abdul Rahim, Nur Dianna (2020) Automation of using Robotic Process Automation (RPA) for Web Scraping. [Final Year Project] (Submitted)

Musthafa, Amirul Hafiz (2020) Digitalization on Cocurricular System. [Final Year Project] (Submitted)

Mohamad Noor, Faris Effendy (2020) Automatic Weather Observation System. [Final Year Project] (Submitted)

Zuaini, Muhammad Nashriq Aiman (2020) Numerical simulation of directional wave hydrodynamic force: A study of diffraction effects. [Final Year Project] (Submitted)

Wong , Joel Weng Lok (2020) Structural Behavior of Novel Hybrid Composite Beams Made of Geopolymer Concrete and High-Performance Concrete (HPC). [Final Year Project] (Submitted)

Saari, Nurul Syahirunisa (2020) Production of Natural Aid Coagulant for Turbidity Removal in Kaolin Suspension. [Final Year Project] (Submitted)

Mohd Azlan, Mohamad Azwan (2020) Prediction of Water Availability for Paddy Crop: Case Study at Felcra Seberang Perak. [Final Year Project] (Submitted)

ANUAR, MOHAMAD ARIF AIMAN (2020) FRAMEWORK FOR EFFECTIVE COST CONTROL FOR SAFETY COMPLIANCE IN CONSTRUCTION PROJECTS. [Final Year Project] (Submitted)

Vijayakumar, Kishankumar (2020) Study on The Effect of Polymerised Palm Oil on The Fatigue Performance of Hot Mix Asphalt. [Final Year Project] (Submitted)

Yang , Shaun Jia Ming (2020) STIFFNESS ANALYSIS OF OFFSHORE GROUTED JOINTS USING DAMAGE DETECTION METHODS. [Final Year Project] (Submitted)

R RAVICHANDRAN, THEVAKARAN (2020) DEFORMATION PROPERTIES OF RUBBERISED CONCRETE MODIFIED WITH STEEL TYRE WIRE. [Final Year Project] (Submitted)

Lim Yong, Benjamin Hong (2020) EVALUATION OF ALONGSHORE SEDIMENT TRANSPORTS AT PANTAI TELUK NIPAH, PANGKOR ISLAND. [Final Year Project] (Submitted)

Mohd Khairi, Afnan Munir (2020) The Interaction of Activity-Travel Pattern, Built Environment and Physical Intensity on Physical Health. [Final Year Project] (Submitted)

Abdul Rahim, Ameir Yusuf (2020) Fatigue Analysis of Relocatable Offshore Platform in Shallow Water Marginal Fields. [Final Year Project] (Submitted)

Gunasegaran, Vinod Joshua (2020) Investigations of The Effect of Mooring Line Parameters On the Hydrodynamic Behavior of Semisubmersible Offshore Wind Turbine in Malaysia Water Environment – Physical Model Testing. [Final Year Project] (Submitted)

Ramesh, Vishal Avinash (2020) Rapid Numerical Prototyping of Wind Turbine. [Final Year Project] (Submitted)

SOO , SIN QUAN (2020) Investigating Properties of Interlocking Bricks with Rubber Glove Manufacturing Residue (RGMR) and Crumb Rubber. [Final Year Project] (Submitted)

Tan , Kai Xian (2020) Damage Detection of Offshore Structure Tubulars using Frequency Method. [Final Year Project] (Submitted)

Suherman, Sarah (2020) The Impact of Differential Subsidence on The Integrity of Offshore Platform Jacket Using Linear Static Analysis. [Final Year Project] (Submitted)

Manimaran, Rajaletchumi (2020) A Review on the Effect of Sand Dune on the Hydrodynamic Properties of Rivers. [Final Year Project] (Submitted)

Leong , Jia Cong (2020) Experimental and Numerical Study on Mechanical Properties of Steel-Geopolymer Concrete-Steel Beam. [Final Year Project] (Submitted)

Shu Ying, Amanda Ong (2020) Numerical Assessment of Reinforced Thermoplastic Pipe (RTP) with Crack under Spanning Condition. [Final Year Project] (Submitted)

Lo , Jia Hao (2020) Behaviour of Thin-Walled Cylindrical Shell Storage Tank under Blast Impacts: Finite Element Analysis. [Final Year Project] (Submitted)

Teik, Ang Hun (2020) Extraction, Characterisation, Optimisation in Chlorella vulgaris microalgae harvesting by Bael extract and Its Cost Benefit Analysis. [Final Year Project] (Submitted)

Rosman, Muhammad Harith Shah (2020) The Interaction of Activity Travel Participation, Built Environment and Social Intensity on Social Health. [Final Year Project] (Submitted)

NORADHA, MUHAMMAD HAZEEQ (2020) CERTIFICATION OF APPROVAL WATER QUALITY ASSESSMENT ON TREATMENT TRAIN SYSTEM FOR STORMWATER RUNOFF. [Final Year Project] (Submitted)

Azmim, Mohamad Ridzwan (2020) OFFSHORE RENEWABLE ENERGY DEPLOYMENT IN MALAYSIA: A SURVEY STUDY. [Final Year Project] (Submitted)

Zulkifli, Muhammad Amirhanafi (2020) Water Quality Analysis at Sungai Lumut Kiri and Floating Rubbish Problem. [Final Year Project] (Submitted)

Xin Xian, Beryl Wong (2020) Value-Based Decision Making for Redeveloping Transportation Facilities(Case Study: Kapit Airport). [Final Year Project] (Submitted)

Abdul Halim , Nur Ain Syafiqah (2020) Designing of Bentonite Grout Mixture for Borehole Extensometer Application. [Final Year Project] (Submitted)

Salim, Siddique Mohamad Yatim (2020) Numerical Simulation of Directional Wave Hydrodynamic Forces: A Study of Cylinder Arrays. [Final Year Project] (Submitted)

Lee , Jian Heng (2020) Last Planner System (LPS) for Industrialized Building System (IBS) Application in Construction Industry. [Final Year Project] (Submitted)

Xiang En, Roy Chang (2020) PARAMETRIC ANALYSIS OF FLOATING SOLAR SYSTEM FOR MALAYSIAN OFFSHORE APPLICATIONS. [Final Year Project] (Submitted)

Low, Dewon (2020) DEVELOPING A FOREST FIRE DISASTER MANAGEMENT SYSTEM USING GIS AND MACHINE LEARNING. [Final Year Project] (Submitted)

Che Wan Azman, Che Wan Nor Shahirah (2020) Evaluation of the Impact of Backwater on the Hydraulics Performance of Modules using FLOW-3D. [Final Year Project] (Submitted)

Kesavadasan, Thasaini Nambiar (2020) MARINE CURRENT ENERGY RESOURCE ASSESSMENT IN MALAYSIA. [Final Year Project] (Submitted)

R Sundaram, Ranjiivan (2020) Curing Methods on Early Strength of Geopolymer Concrete. [Final Year Project] (Submitted)

R Sundaram, Ranjiivan (2020) Curing Methods on Early Strength of Geopolymer Concrete. [Final Year Project] (Submitted)

CHAN, ENG CHUNG (2020) Petrophysical and Flow Unit Evaluation of Carbonate Reservoir, Central Luconia, Offshore Sarawak, Malaysia. [Final Year Project] (Submitted)

PERMALU, ARULINI (2020) VELOCITY MODEL BUILDING USING DIVING WAVE TOMOGRAPHY (DWT) TO CORRECT IMAGE BELOW SHALLOW GAS CLOUD IN MALAY BASIN. [Final Year Project] (Submitted)

RIAK MACHAR, ABUOI LEET (2020) Reservoir Characterization of X Field Using Well Logs and Seismic Inversion. [Final Year Project] (Submitted)

AHMAD YANI, FARIS FARHAN (2020) Seabed Hazard Based on Quantitative analysis (statistical) SPSS using 3D seismic data and Well data on Inas Field, Malay Basin. [Final Year Project] (Submitted)

AHMAD HUFAIZAL, MUMAMAD ZULHAKIM (2020) PETROLEUM SYSTEM MODELLING OF PELOTAS BASIN, OFFSHORE BRAZIL, USING 2D BASIN MODELLING APPROACH. [Final Year Project] (Submitted)

MOHD RADZI, SITI SYAHIRA (2020) SEISMIC PALEOGEOGRAPHY & FLUVIAL SYSTEM EVOLUTION OF GROUP I, BX FIELD, MALAY BASIN. [Final Year Project] (Submitted)

Rayman, Mohd Nur Azmin (2020) Geomechanical Analysis of Soft Sedimentary Rock of Bera-Semantan Formation in Bera Province, Pahang. [Final Year Project] (Submitted)

CHIN, LEE JIA (2020) Seabed hazard based on quantitative analysis (statistical) SPSS using 3D seismic data on Melor Field, Malay Basin. [Final Year Project] (Submitted)

Por, Kia Jun (2020) PORE PRESSURE PREDICTION USING 2D BASIN MODELLING TECHNIQUE. [Final Year Project] (Submitted)

AUNG, HEIN HTET (2020) RESERVOIR PROPERTY PREDICTION FROM POST STACK SEISMIC INVERSION DATA. [Final Year Project] (Submitted)

NYI MAUNG, THAR NYI (2020) LITHOLOGY AND FLUID PREDICTION USING AVO METHOD AND INVERSION. [Final Year Project] (Submitted)

TAHIR, MUHAMMAD ZAKI (2020) Carbonate microfacies and pore types characterization of tight layers interval in EX field, Central Luconia, offshore Sarawak. [Final Year Project] (Submitted)

AHMAD YANI, FARIS FARHAN (2020) Seabed Hazard Based on Quantitative analysis (statistical) SPSS using 3D seismic data and Well data on Inas Field, Malay Basin. [Final Year Project] (Submitted)

AHMAD HUFAIZAL, MUMAMAD ZULHAKIM (2020) PETROLEUM SYSTEM MODELLING OF PELOTAS BASIN, OFFSHORE BRAZIL, USING 2D BASIN MODELLING APPROACH. [Final Year Project] (Submitted)

Hashim, Hanis Humairah (2020) SLOPE INSTABILITY AT MRSM BENTONG. [Final Year Project] (Submitted)

Rayman, Mohd Nur Azmin (2020) Geomechanical Analysis of Soft Sedimentary Rock of Bera-Semantan Formation in Bera Province, Pahang. [Final Year Project] (Submitted)

CHIN, LEE JIA (2020) Seabed hazard based on quantitative analysis (statistical) SPSS using 3D seismic data on Melor Field, Malay Basin. [Final Year Project] (Submitted)

Nyi Maung, Thar Nyi (2020) LITHOLOGY AND FLUID PREDICTION USING AVO METHOD AND INVERSION. [Final Year Project] (Submitted)

N.Paramananthan, Nanthar Kugarn (2020) FUNCTIONALITY AND PERFORMANCE STUDY OF IOT INTEGRATED MULTI-TANK WATER LEVEL MONITORING SYSTEM. [Final Year Project] (Submitted)

MUHAMAD HAFIZ, EMMANUEL ABBASY (2020) Extraction of Plant-Based Polymer as Potential Flow Improver. [Final Year Project] (Submitted)

MUSTAFA KAMAL, MOHD AIDIL FIRDAUS (2020) STUDY OF STABILITY AND THERMAL CONDUCTIVITY OF MULTIWALL CARBON NANOTUBES AND COPPER OXIDE IN ETHYLENE GLYCOL AT MEDIUM TEMPERATURE. [Final Year Project] (Submitted)

Davis, Michael Tristan (2020) Experimental Investigation on Wire Rope Isolators. [Final Year Project] (Submitted)

Chuok, Gan Yee (2020) The Effect of Welding Parameters Between Titanium Alloy and Stainless Steel with Interlayer of Aluminium Alloy in Resistance Spot Welding. [Final Year Project] (Submitted)

Loh, Xi Li (2020) Numerical Investigation of Geometrical Tolerance Effect on Torque and Power Output of Slip-On Sprocket. [Final Year Project] (Submitted)

Saifuddin, Ahmad Syahir (2020) Numerical Study Of Nanofluids Assisted Thermoelectric Air Conditioner. [Final Year Project] (Submitted)

Mazlan, Luqman Hakim (2020) Coefficient of Performance (COP) evaluation of electric water-cooled chiller during partial/full load operation at PUTRAJAYA plant 1. [Final Year Project] (Submitted)

Nor Shaharim, Mohammad Haqimi Izwan (2020) Parametric Study of Double Axes Tracking Heliostat to Optimize Heliostat Field Efficiency. [Final Year Project] (Submitted)

Muzir, Nur Ashila Nadhirah (2020) A Study of Electrochemical Measurements Under Microemulsion Condition Corrosion. [Final Year Project] (Submitted)

Khairul Anuar, Daniel Affendy Amri (2020) Tensile Properties Prediction of Polypropylene Reinforced Woven Kenaf Composite using Micromechanical Models. [Final Year Project] (Submitted)

Su Rat, Santie Chai Khamkeo (2020) Computer Simulation Development of Hydro-cyclone Performance in Solid Liquid Separation. [Final Year Project] (Submitted)

BAHARUDDIN, AHMAD AIDIL AIZAT (2020) PERFORMANCE OPTIMIZATION OF A ROOF TOP TRANSVERSE AXIS WIND TURBINE. [Final Year Project] (Submitted)

Megat Iskandar, Megat Amirul Adli (2020) Numerical Study of Topology Optimization of Jacket Platform: A Review. [Final Year Project] (Submitted)

Kamaruddin, Haikal (2020) STUDY OF FRICTION STIR WELDING TOOL’S COATING MATERIAL (TiAlN) FOR TUNGSTEN CARBIDE COBALT. [Final Year Project] (Submitted)

MOHAMED KHAIRI, MOHAMED IKRAM (2020) COMPUTATIONAL FLUID DYNAMIC (CFD) SIMULATION OF SLUG FLOW WITHIN PIPE BEND AND PIPE ELBOW WHICH INDUCE VIBRATION. [Final Year Project] (Submitted)

AHMAD SHAKARIA, AHMAD FARIS ASLAM (2020) DEVELOPMENT OF AN ELECTROSTATIC DISCHARGE (ESD) EVENT DETECTOR SYSTEM FOR AN ELECTRONIC MANUFACTURING PRODUCTION LINE. [Final Year Project] (Submitted)

Shafie, Izzat Sayyidi (2020) Characterizations of Solid Biomass Fuel Pellets. [Final Year Project] (Submitted)

ZAMANI, MUHAMMAD ALDRIN SYAFRIZAL (2020) SIMULATION OF SAND PARTICLE FLOW THROUGH SAND SCREEN IN OIL WELL. [Final Year Project] (Submitted)

AZIZI, MUHAMMAD FAKHRU RAZI (2020) Finite Element Analysis of Disbondment in Thermoplastics Composite Pipe (TCP) Fitness for Surface (FFS). [Final Year Project] (Submitted)

Mohd Zarir, Marni Zalikha (2020) Investigation on The Characteristics of Magnetorheological Elastomer Using Natural Rubber and Petroleum-Based Oil. [Final Year Project] (Submitted)

ISHAK, MIUHAMMAD HARITH IRFAN (2020) MODAL ANALYSIS OF A STRAIGHT PIPE WITH AND WITHOUT FLUID. [Final Year Project] (Submitted)

Mohd Khalid, Muhammad Azrai (2020) GREEN CORROSION INHIBITOR ( THYME OIL) LOADED HNT FOR CORROSION PROTECTION OF CARBON STEEL. [Final Year Project] (Submitted)

Gobalu, G.Kabhilan (2020) Molybdenum Disulphide/Cellulose Acetate Nanofiber Composite on Screen Printed Electrodes for Determining Cardiac Disease by Electrochemical Impedance Spectroscopy. [Final Year Project] (Submitted)

SHAHROL AZRAI, FARID AIMAN (2020) Electrochemical Impedance Evaluation Of Coating Under Simulated Splash Zone Condition. [Final Year Project] (Submitted)

Mohd Nor Azami, Aina Syahira (2020) Numerical Analysis on Continuum Damage Mechanism of Thermoplastic Composite Pipe (TCP). [Final Year Project] (Submitted)

Sandrasagar, Suresh (2020) Performance Evaluation of Vertically Oriented Compound Parabolic Concentrating Solar Collector Integrated with Heliostat Field. [Final Year Project] (Submitted)

Mat Arifin, Arief Farhan (2020) Experimental investigation of open loop thermosyphoning in evacuated tube receiver under varying heat flux. [Final Year Project] (Submitted)

Ismail, Syahmi (2020) Finite Element Analysis (FEA) on Friction Stir Welding of Aluminium Alloy, AA5083 Using Coupled Eulerian-Lagrangian Model with Time-Scaling. [Final Year Project] (Submitted)

Mohd Noor, Mohammad Norazmeer (2020) Study on Material Integrity of Aluminium 7075 after Heat Treatment Process for Medical Tools. [Final Year Project] (Submitted)

AB RAHMAN, AIDIL (2020) The Effect of Welding Parameters to Mechanical and Physical Properties during Resistance Welding of Titanium Alloys. [Final Year Project] (Submitted)

Razuki, Muhamad Afham (2020) Hydroxyapatite and Titania (HA-TiO2) powder mixed EDM for surface modification. [Final Year Project] (Submitted)

Mohamad Redzuan, Intan Fazreenna (2020) Predicting Tensile Properties of Lalang Grass Fiber (LGF) Reinforced Polypropylene (PP) using Mathematical Modelling. [Final Year Project] (Submitted)

Abdul Basith, Mohammad Sobir (2020) Effects on Number of Supports on Vibration and Stress Distribution for Piping System. [Final Year Project] (Submitted)

Salim, Muhammad Shahrul Izzwan (2020) CRACK PREDICTION OF USING FINITE ELEMENT ANALYSIS. [Final Year Project] (Submitted)

Karthegesu, Shamni (2020) Predicting the Tensile Properties of Recycled Polypropylene (r-PP)/Mengkuang Leaf Fibre (MLF) Composite using Mathematical Modelling. [Final Year Project] (Submitted)

Makentheran, Kayilass Hari Nair (2020) DYNAMIC ANALYSIS FOR SELF –LOCKING TRAPEZOIDAL ORIGAMI SHELL STRUCTURE. [Final Year Project] (Submitted)

MOHAMMAD, SYAZWAN FIKRI (2020) THERMAL DEGRADATION BEHAVIOUR OF CARBON FIBRE WASTE AS A FILLER IN POLYMER HYBRID COMPOSITES. [Final Year Project] (Submitted)

Hassan, Muhamad Shukri (2020) Integration of RAM Model and DES Method in Assessing Plant Utilization. [Final Year Project] (Submitted)

Abdul Aziz, Aisar Amiree (2020) Development of an empirical model for energy usage and machine maintainability: palm oil pressing. [Final Year Project] (Submitted)

Chandrashakeran, Dharmesh Kumar (2020) The Influence of Oxidizing Parameters on the Formation of Oxide Layer as a Precursor for the Fabrication of Carbon Fiber-Steel Laminate. [Final Year Project] (Submitted)

Yusa’, Nur Atikah (2020) Analysis on Mechanical Properties of Waste High Density Polyethylene (HDPE) Plastic. [Final Year Project] (Submitted)

Mohamad Noor, Wan Aizat (2020) The Study of Magneto-Active Polymer Composite Physiochemical Characteristics Using Petroleum Based Oil as a Dispersing Aid. [Final Year Project] (Submitted)

Hazarudin, Nurul ‘Awatif Hanani (2020) Effects of Liquid-Gas Fraction on Vibrational Behaviour of Piping System. [Final Year Project] (Submitted)

JA’AFAR, NUR SYAHIRAH (2020) ANALYSIS OF WATER-COOLED ELECTRIC CHILLER AT DISTRICT COOLING PLANT. [Final Year Project] (Submitted)

Ravi Chandran, Meveeqhen (2020) Simulation Study on Utilisation of Biogas from Palm Oil Mill Effluent (POME) as Fuel for Diesel Generator Set. [Final Year Project] (Submitted)

Sivaraj, Ramaneish (2020) To study the Hardness and Mechanical Properties of Aluminium Composite Reinforced with Titanium Carbide & Graphite. [Final Year Project] (Submitted)

Ab. Aziz, Muhammad Yusri Hafiz (2020) Electrochemical Impedance Spectroscopy Evaluation of Non-Metallic Pipe (NMP) Degradation in CO2 Environment. [Final Year Project] (Submitted)

RAZAK, ARIFF QAMARUDDIN (2020) FAILURE ANALYSIS OF POLYVINYLIDENE FLUORIDE BY DEGRADATION FOR A PIPELINE. [Final Year Project] (Submitted)

KUANG, ZHI WEN (2020) WATER AND GAS ABSORPTION OF POLYTETRAFLUOROETHYLENE AS A PIPELINE. [Final Year Project] (Submitted)

Razalee, Muhammad Reezwan Shah (2020) RELATIVE ATTACK ANGLE OF FIN AFFECTS THE CONVECTIVE HEAT TRANSFER. [Final Year Project] (Submitted)

MUHAMMAD NUR AZLEE STANLEY, MUHAMMAD NUR AFIF DANIAL (2020) COMPUTATIONAL FLUID DYNAMICS (CFD) SIMULATION OF BYPASS FRACTION FOR BYPASS PIG IN MULTIPHASE FLOW. [Final Year Project] (Submitted)

Ravevarman, Puviin Varman (2020) Degradation and Characterization of Bio-Waste Reinforced Polymer Composite. [Final Year Project] (Submitted)

Americo, Paulo Faife Inocencio (2020) Numerical Investigation of PDC Cutter – Rock Interaction using LS-DYNA and Design of Experiment. [Final Year Project] (Submitted)

Norafizal, Arif Isyraf (2020) Effects of Vacuum Bagging Techniques on Mechanical Properties of CarbonEpoxy Laminates. [Final Year Project] (Submitted)

Chen , Tien Hao (2020) COMPUTATIONAL SIMULATION OF ENGINE COOLING SYSTEM PERFORMANCE OF A COMMERCIAL CAR. [Final Year Project] (Submitted)

NG, EUNICE HUI RONG (2020) The influence of acid surface treatment on the physical and mechanical properties of steel structure as a precursor for fiber metal laminate structure. [Final Year Project] (Submitted)

Lal, Chandreshah (2020) DETERMINATION OF FRACTURE TOUGHNESS AND STRAIN ENERGY RELEASE RATE FOR BASALT/EPOXY COMPOSITES. [Final Year Project] (Submitted)

MARTANG, MOHD NUR IZZWAN (2020) COMBUSTION ANALYSIS OF WATER-IN-BIODIESEL EMULSIFIED FUELS. [Final Year Project] (Submitted)

Yee , Guo Shen (2020) Numerical Study on Cross Flow Maisotsenko Cycle Indirect Evaporative Cooling (MCIEC) Heat Exchanger. [Final Year Project] (Submitted)

Armando Macuacua, Florivaldo Daniel (2020) CFD Optimization Of Building Glazed Cladding In Order To Achieve Thermal Comfort And Achieve Energy Saving. [Final Year Project] (Submitted)

ZULKIFLI, MUHAMMAD AFIQ IKHWAN (2020) Numerical Evaluation of Thermal Striping in MLNG Tiga Regenerative Piping. [Final Year Project] (Submitted)

Abdullah Saloji, Nasrullah (2020) Study on physicochemical properties of Magnetorheological Elastomer Featuring Naphthenic Oil as Additive. [Final Year Project] (Submitted)

Jaafar, Nur Nabila Najad (2020) Effect of Hybrid Composition and Volume Fraction on Microstructure and Microhardness of 7075 Aluminum Alloy via Friction Stir Processing. [Final Year Project] (Submitted)

AMARPALL SINGH, AJIT SINGH (2020) THE EFFECT OF WEIGHT PERCENTAGES OF CARBONYL IRON PARTICLES (CIP) ON THE PHYSICOCHEMICAL CHARACTERISTICS OF EPOXIDIZED NATURAL RUBBER-50 (ENR-50) BASED MAGNETORHEOLOGICAL ELASTOMERS (MRE). [Final Year Project] (Submitted)

Azmin, Muhammad Danial (2020) CFD ANALYSIS OF MODIFIED IMPELLER FOR PAINT MIXER. [Final Year Project] (Submitted)

MOHD YATIM, MUHAMMAD FARHAN (2020) SOOT REMOVAL SYSTEM USING ELECTROMAGNETIC WAVE HEATING FOR VEHICLE EXHAUST AFTER TREATMENT. [Final Year Project] (Submitted)

Me’eraj, Abdul Rasyid (2020) Risk Analysis of Domino Effect Due to Fire in Petroleum Plants. [Final Year Project] (Submitted)

Kang , Chin Ann (2020) Development of Thermoplastic 3D Woven Composite. [Final Year Project] (Submitted)

Wan Basiron, Wan Amirul Asyraf (2020) Performance Investigation of Flat Plate Solar Collector using vegetable oil-based nanofluids. [Final Year Project] (Submitted)

Hassan, Muhammad Haziq Hassani (2020) Modelling and Motion Analysis of a Cylindrical Steel-Rod under Very Close Distance between Electromagnets with Alternating Polarities. [Final Year Project] (Submitted)

Abul Kalam Azad, Nursyhira Azad (2020) Investigation of Tribological Properties of Hybrid HDPE Polymer Nano Composites. [Final Year Project] (Submitted)

Yazib, Muhammad Muaz (2020) Contribution of Zinc Oxide and Halloysite Nanotubes in Epoxy Coating for Corrosion Protection. [Final Year Project] (Submitted)

Abdull Hadi, Mohd Ameerul Haziq (2020) To Study the Effect of Waste Glass Powder and Zirconium Phosphate on the Properties of Intumescent Fire-Retardant Coating. [Final Year Project] (Submitted)

Abu Bakar, Abu Amirul Shafiq (2020) Study on the Mechanical Behavior of Al - 7075 after Heat Treatment Process in Biomedical Field. [Final Year Project] (Submitted)

Zulkifly, Siti Nurfathehah (2020) Home Security System by using Deep Learning. [Final Year Project] (Submitted)

Mohammed Daud, Danial Hariz (2020) Museums Tour Enhancement With Augmented Reality: A Proposed Enhancement Designs of Exhibits to Improve Informal Learning. [Final Year Project] (Submitted)

MOHAMED SHAHID, AFIQA (2020) Social Media Sentiment Analysis - Twitter. [Final Year Project] (Submitted)

Ahmad Zahani, Ahmad Akram Zulfikkar (2020) PTLCL Ops System (POS) for PETRONAS Trading Labuan Co. Ltd. [Final Year Project] (Submitted)

Mohd Razali, Ahmad Farid (2020) BUSINESS MARKETING MANAGEMENT SYSTEM (BMMS). [Final Year Project] (Submitted)

Zulkifli, Ahmad Rashdan (2020) AUTOMATED STUDENT ATTENDANCE SYSTEM THROUGH FACE-RECOGNITION USING NVIDIA JETSON AND CUDA TECHNOLOGY. [Final Year Project] (Submitted)

ISHAK, AIDA NURSABRINA ISMA (2020) THE DEVELOPMENT OF AN EXPERTISE LOCATOR SYSTEM (ELS) FOR ORGANIZATIONS. [Final Year Project] (Submitted)

Abd Rahim, Nur Ezzati Alya (2020) Framework for Effectiveness Human Resource Management in Compliance of Safety in Construction Industry. [Final Year Project] (Submitted)

Azizan, Nur Afiqah (2020) Erosion Susceptibility mapping using Machine Learning and GIS: A case study of Kelantan. [Final Year Project] (Submitted)

Ravinthiran, Thayalan (2020) Numerical Simulation of Buried Pipeline under Axial Soil Displacement. [Final Year Project] (Submitted)

KAMARUDIN, NUR KHALIDAH (2020) SPATIAL MODELLING OF FLOOD SUSCEPTIBILITY IN PERLIS USING GEOGRAPHIC INFORMATION SYSTEM (GIS) AND SUPPORT VECTOR MACHINE (SVM). [Final Year Project] (Submitted)

LIM , TEIK HAN (2020) COMPARISON THE STRUCUTRAL PERFORMANCE OF FLY ASH GEOPOLYMER, HIGH PERFORMANCE AND HYBRID COMPOSITE CONCRETES WITHOUT SHEAR STIRRUPS. [Final Year Project] (Submitted)

Chin , Shou Xian (2020) Influence of Plant Variation for Treatment Train on Hydrologic Performance for Stormwater Runoff Treatment. [Final Year Project] (Submitted)

JAMALUDDIN, MUHAMMAD REDZUAN (2020) IDENTIFICATION OF SUITABLE LOCATIONS OF OCEAN ENERGY IN LABUAN STATE - GIS APPROACHED. [Final Year Project] (Submitted)

Thanasegaran, Chanteini (2020) Computational Study on Effect of Seawater Physical Properties Towards Crude Oil: A Lattice Boltzmann for Solute Transport Approach. [Final Year Project] (Submitted)

Abd Rahman, Danial (2020) Integrated Virtual Queuing System. [Final Year Project] (Submitted)

Saharum, Muhammad Syafiq (2020) A Prediction Model for Corrosion Damage Due to Naphthenic Acid on Oil and Gas Pipelines Using Linear Regression. [Final Year Project] (Submitted)

Ismail, Azman (2020) TOKEI - Teaching Autism Children to Read Analog Clock using IoT Robot. [Final Year Project] (Submitted)

JALALUDIN, MALIK SAIFUL LIZAN (2020) SMART REMOTE CONTROL SYSTEM (SRCS). [Final Year Project] (Submitted)

Thong , Noah Tsin Wee (2020) DESIGN OF REMOTE ANIMAL TRACKING SYSTEM USING APRS NETWORK. [Final Year Project] (Submitted)

Nazir, Yasser Abdul Karimo (2020) A Facial Recognition alternative to Home Automation Security System. [Final Year Project] (Submitted)

Abdul Latif, Ammar Aiman (2020) E.Ubat: A drug informatics system for medicine information and dosage guide. [Final Year Project] (Submitted)

Mohd Tarmizee, Aina Farihah (2020) A PRACTICAL LOCAL ENTERTAINERS BOOKING WEBSITE. [Final Year Project] (Submitted)

Kariom Lang-rot, Bull Mawat (2020) Predictive Analytics: Bursa Malaysia Stocks price prediction. [Final Year Project] (Submitted)

Agany Manyiel, Joseph Mabor (2020) Multi-population Genetic Algorithm for Rich Vehicle Routing Problems. [Final Year Project] (Submitted)

Zainal Abidin, Nuraina Aqilah (2020) Web-Portal on Indigenous Plants for Awareness Creation among Younger Generations. [Final Year Project] (Submitted)

Zulkharnain, Nur Adilla (2020) Development of a Mobile Application Using Augmentative and Alternative Communication and Video Modelling for Autistic Children. [Final Year Project] (Submitted)

Taharuddin, Nur Syazwin Ilani (2020) Patrol Pocket. [Final Year Project] (Submitted)

Ayub, Arif (2020) Fake Smartwatch Review Monitoring and Analysis System. [Final Year Project] (Submitted)

BAHARUDIN, NUR FARAHIN (2020) Prediction of Corrosion in Pipeline by using Deep Learning. [Final Year Project] (Submitted)

P.Harpal Singh, Keshweenpal Singh (2020) ZORORO SHOPPING WEBSITE. [Final Year Project] (Submitted)

Halmi, Muhammad Hazrin (2020) Football Talent Identification (FootNet). [Final Year Project] (Submitted)

Abdul Munir, Muhammad Hakimi (2020) Contractor Connector Hub Application (ContractorGo). [Final Year Project] (Submitted)

Anandarajah, Lagindran (2020) Preliminary Eye Check-Up and Appointment System. [Final Year Project] (Submitted)

Arumugam, Vickneswaran (2020) Indian Food Information System. [Final Year Project] (Submitted)

Chou, Jing Haur (2020) E- HEALTHCARE FOR PETS. [Final Year Project] (Submitted)

Mohan, Divya Gopal (2020) Automated Criteria Based Group Formation to Improve Team Performance. [Final Year Project] (Submitted)

Kamarulzaman, Iqbal Hanif (2020) Smart Aquaculture – Monitoring Prediction System (i-AMPs). [Final Year Project] (Submitted)

Mohd Noh, Muhammad Ashraf Aiman (2020) IOT: Controlling Pest and Managing Plant in Farming Sector. [Final Year Project] (Submitted)

Aidi, Amiera Sofiya (2020) Monitoring of Medication Adherence for the Elderly. [Final Year Project] (Submitted)

Mohd Anuar, Nurulain Syafiqah (2020) Exploring Data Engineering Technology for Worker Incentive. [Final Year Project] (Submitted)

Talib, Muhammad Taqiuddin (2020) Hydro Fert: Development for Smart Monitoring in Hydroponic Fertilization. [Final Year Project] (Submitted)

Abdul Halim, Muhammad Mustaqim (2020) Garbage Bin Monitoring System using GSM. [Final Year Project] (Submitted)

Rahmat, Mustaien Fathur Rahim (2020) Deep Learning for Optical Character Recognition of Arabic Text. [Final Year Project] (Submitted)

Abang Mustapha, Dayang Umira Athira Fatini (2020) IoT-Based Soil Monitoring System with Agricultural Drone. [Final Year Project] (Submitted)

Hari Sundar, Hari Saresh (2020) DYNAMIC PRICING ALGORITHM IN PARKING SYSTEMS. [Final Year Project] (Submitted)

Zulkifli, Nurzulaikha (2020) AN INTERACTIVE CHATBOT FOR PREDICTIVE DASHBOARD. [Final Year Project] (Submitted)

HAWAZIL, HAIZA SHAZLEEN (2020) VIRTUAL REALITY MENTAL REHABILITATION. [Final Year Project] (Submitted)

MAHATHER, MARINA (2020) SCRUB NURSE SCHEDULING SYSTEM IN HOSPITAL OPERATION THEATRE. [Final Year Project] (Submitted)

Ibrahim, Nur Hidayah (2020) A Mobile Application for Bus Tracking System in UTP. [Final Year Project] (Submitted)

NAZLAN, NURIN NABILAH (2020) ATTENTION DEFICIT HYPERACTIVITY DISORDER E-SKOOL MOBILE APPLICATION. [Final Year Project] (Submitted)

Mohd Hisham, Nor Maisarah (2020) Final Year Project Progress Monitoring System. [Final Year Project] (Submitted)

Norazizi, Nurul Syahirah (2020) Security Systems in Residential Areas. [Final Year Project] (Submitted)

Khairulfitri@Khaironi, Nureen Izzati (2020) A Web-Based Search Engine on Indigenous Plant for Medical Purposes. [Final Year Project] (Submitted)

Mohd Alwi, Irsalina Ilyana Sufi (2020) UNI FINDER – A Web-Based System for Assisting in the Selection of University Programme in Malaysia Based on MBTI Personality Types. [Final Year Project] (Submitted)

Madzir, Intan Haniza (2020) ONE STOP CENTRE INFORMATION FOR TOURISTS AT RURAL AREA, SG SIPUT, PERAK. [Final Year Project] (Submitted)

Yeu, Le Yun (2020) Android Application that Translate Voice to Sign Language. [Final Year Project] (Submitted)

Zainol Azman, Muhammad Izzul Azri (2020) Aedes Larvae Classification and Detection (ALCD) System by Using Deep Learning. [Final Year Project] (Submitted)

Saibol Hamid, Nurul Nabilah (2020) ASSET AND INVENTORY MANAGEMENT SYSTEM (AIMS). [Final Year Project] (Submitted)

Zulhairi, Zulaikha (2020) Complaint & Compliment System (CCS UTP). [Final Year Project] (Submitted)

Anandan, Muginesh Kumar (2020) Overcoming Cyberbully : A Web Based System (Mobile Friendly). [Final Year Project] (Submitted)

Zaini, Nurfaraheen (2020) 1D CNN Model for Corrosion Prediction. [Final Year Project] (Submitted)

Nagendran, Srikanth (2020) SMART WATER BOTTLE. [Final Year Project] (Submitted)

AHMAD RASHIDI, NUR KHALIS (2020) e-Certificate: Online Platform for Certificate Management System. [Final Year Project] (Submitted)

Dahlil Sabri, NurNajwa Syuhada (2020) StayQuest: Muslim-Friendly Homestay Booking Application. [Final Year Project] (Submitted)

MURUGAN, THURGASHHINI (2020) SMART WHEEL: A COMMUNITY-DRIVEN NAVIGATIONAL APP FOR WHEELCHAIR DISABLED PEOPLE: A CASE STUDY ON IOI CITY MALL. [Final Year Project] (Submitted)

Mat Ghani, Muhammad Izzat Faris (2020) Performance Analysis of Authentication Mechanism in Microservice. [Final Year Project] (Submitted)

Khalid, Atikah (2020) Visual Analytics for Faculty Teaching Practice and Performance using Educational Mining Techniques. [Final Year Project] (Submitted)

Mahadhir Alam Shah, Siti Nur Afifah (2020) WeHome: Smart Home Automation Control System using IoT and Android Mobile Application. [Final Year Project] (Submitted)

Tan, Ying Zhi (2020) Dragon Fruit Classification using Convolutional Neural Network. [Final Year Project] (Submitted)

AZMEI, WAN SOFINA (2020) Interesting Places Finder Mobile Application. [Final Year Project] (Submitted)

Rizwadi Irwan, Batrisyia (2020) Student Timetable Mobile Application. [Final Year Project] (Submitted)

Azman, Alia’ (2020) Cloud Document Management System for PETRONAS Technical Standards. [Final Year Project] (Submitted)

SAMUEL PETER, SHIPHRAH ESTHER (2020) DEPRESSIVE EARLY DETECTION SYSTEM. [Final Year Project] (Submitted)

NORSALLEHIN, NOOR AISHAH (2020) Predictive Analytic of Corrosion Build Up Rate by Utilizing Artificial Neural Network. [Final Year Project] (Submitted)

Zamri, Muhammad Izzat (2020) Smart IOT Based Application to Reduce Car Accident. [Final Year Project] (Submitted)

MOHD SAMLAN, NUR NASHA AYUNI (2020) Predictive Analytic on Machine Failure by Utilizing Linear Regression (Historical Data). [Final Year Project] (Submitted)

Hashmillail, Syarafina (2020) No-Queue: Mobile Application for Virtual Queuing. [Final Year Project] (Submitted)

ABDUL RAHIM, NURALIAH (2020) ANALYSIS OF CUSTOMER SERVICE BUSINESS PROCESS USING DATA MINING. [Final Year Project] (Submitted)

Wong, Elvis Kar Hou (2020) Deep Learning Inspection of Modules in Finisar. [Final Year Project] (Submitted)

Jaganathan, Johnathan (2020) Comparing Website Implementation Between Cloud Services and Conventional Hosting Methods. [Final Year Project] (Submitted)

KESAVAN, KINES (2020) APPLICATION OF STUDENT SECURITY SYSTEM BY USING RFID. [Final Year Project] (Submitted)

Yusof, Ain Sabrina (2020) Personal Safety Apps for Rape. [Final Year Project] (Submitted)

Mohamed Yunus, Hasanul Zaman (2020) Smart business card using mobile application (e-business card). [Final Year Project] (Submitted)

Mohd Mazelan, Mohd Khairul Rizma (2020) Uni-Ride: Transport Sharing Mobile Application. [Final Year Project] (Submitted)

Niezam, Nur Maisarah (2020) Internship Hotspot Monitoring. [Final Year Project] (Submitted)

ROSFAUZI, ROS DANIAL EMIR (2020) MOBILE WALLET SYSTEM FOR STUDENTS IN BOARDING SCHOOL. [Final Year Project] (Submitted)

Mohd Yazid, Muhamad Haziq Danial (2020) Personality Prediction Based on Sentiment Analysis. [Final Year Project] (Submitted)

Ramoo, Thiveyarupan (2020) Tamil Schools Donation System. [Final Year Project] (Submitted)

Jamaludin, Nurul Diana (2020) Sentiment Analysis on Tourist Attraction Using Online Customer Review. [Final Year Project] (Submitted)

M SALLEH AMRAN, NUR AIN (2020) Wireless Tire Condition Monitoring System. [Final Year Project] (Submitted)

NIK ROSLI, NIK IZRIN HAZIRA (2020) COMMUNITY BASED FOOD MENU PLANNING & RECOMMENDATION SYSTEM. [Final Year Project] (Submitted)

YONG, KHAI YIN (2020) Healthcare Social Network and Electronic Medical Record System. [Final Year Project] (Submitted)

Mohamad Ariff, Nur Dianah (2020) www.bazaar4lokal.shop A Web-Based Platform for Local Businesses. [Final Year Project] (Submitted)

Saadan, Mohammed Nor Syahmi (2020) Visualization of Integrated Student’s Attendance Data using PowerBI. [Final Year Project] (Submitted)

Mohamad Zahir, Danieal Hazziq (2020) UNI-Event: Student’s Events and Activities Mobile Application. [Final Year Project] (Submitted)

EZANI, MOHD DANIAL SAUFI (2020) Smart Lock using UTP Matric Card. [Final Year Project] (Submitted)

Ahmad Farwis, Danish Khalid (2020) Body Health Management Mobile Application. [Final Year Project] (Submitted)

Khairilanwar, Nur Athirah (2020) Smart-AD: Mobile Application for Event Advertising. [Final Year Project] (Submitted)

MOHAMMED SHARIFF, NUR ATIQAH (2020) GENETIC ALGORITHM WITH DEEP NEURAL NETWORK SURROGATE FOR THE OPTIMIZATION OF ELECTROMAGNETIC STRUCTURE. [Final Year Project] (Submitted)

MOHAMAD NOOR, MOHAMAD HAFIZ (2020) TOURISM AUGMENTED REALITY APPLICATION (TARA). [Final Year Project] (Submitted)

Haji Kamarrulzaman, Nor Hani Nabila (2020) Development of Tripod Grasp for 3D Printed Bionic Hand. [Final Year Project] (Submitted)

Uaciquete, Diva Flora (2020) DASHBOARD FOR CORROSION PREDICTION ANALYTICS. [Final Year Project] (Submitted)

Mohd Idrus, Muhammad Faris (2020) Sentiment Analysis on Students’ Satisfaction Towards University. [Final Year Project] (Submitted)

RAMA ROA, SHARVITA (2020) Automated Malicious File Investigation. [Final Year Project] (Submitted)

Mugilan a/l Ravntheran, Mugilan (2020) Shiny Dashboard with MongoDB Database Management. [Final Year Project] (Submitted)

Salem, Ayu Shahirah (2020) PITEH - PROVIDING FINANCIAL IDENTITIES TO THOSE WITHOUT CREDIT SCORES. [Final Year Project] (Submitted)

Kamarulzaman, Kamsyera Naz’ain (2020) Online Internship Placement System. [Final Year Project] (Submitted)

Zakir Ali, Zulaikha Nurbatrisyia (2020) B-SIGHT: Business Intelligence Tool for Online Home-Based Entrepreneurs. [Final Year Project] (Submitted)

ALFANDI, MOHAMMAD NEEZIMAN (2020) COMPARITIVE PETROGRAPHIC ANALYSIS OF KUBANG PASU AND BARAM DELTA SANDSTONES. [Final Year Project] (Submitted)