Items where Department / MOR is "Mechanical" and Year is 2015

Group by: Creators | Item Type | No Grouping
Jump to: | , | A | B | C | D | F | G | H | I | J | K | L | M | N | O | P | R | S | T | U | V | W | Y | Z
Number of items: 185.

Ibrahim, Muhammad Azwan (2015) Correlations between microstructure, nitrogen concentration and micro hardness of nitrided Ferritic Stainless Steel. [Final Year Project] (Unpublished)

,

,, MUHAMMAD YASIR (2015) THE STUDY OF MACHINABILITY AND STRESS CORROSION CRACKING OF AISI 316L STAINLESS STEEL USING END-MILLING. Masters thesis, Universiti Teknologi PETRONAS.

A

A/L Latchumanan, Arun Raj (2015) Knowledge-Based engineering approach for optimal design of pressure vessels. [Final Year Project] (Unpublished)

A/L MUTHIAH, ARAVINDRAN (2015) INVESTIGATION OF THE EFFECTS OF DRILLSTRING DYNAMICS TO MUD FLOW BEHAVIOUR. [Final Year Project] (Unpublished)

A/L Thavanthram, Dashindaran (2015) Development of Microwavable Diesel Soot Filters For Diesel Engine Exhaust System. [Final Year Project] (Unpublished)

A/L UTHRAPATHY, SHATHISWARAN (2015) MODELLING OF HYDRAULIC FLIP INSIDE A SCALED-UP DIESEL INJECTOR NOZZLE. [Final Year Project] (Unpublished)

A/P Sreetharan, Thevi (2015) Risk Based Integrity Modeling of Offshore Process Component Piping. [Final Year Project] (Unpublished)

ABBAS ATYA, ABBAS HASSAN (2015) COMBUSTION OF DEWATERED POULTRY SLUDGE IN A LABORATORY SCALE FLUIDIZED BED COMBUSTOR. PhD. thesis, Universiti Teknologi PETRONAS.

ABD JALIL, AHMAD IDHWAN (2015) FUZZY LOGIC CONTROL FOR ENERGY MANAGEMENT SYSTEM OF A HYBRID ELECTRIC VEHICLE. [Final Year Project] (Unpublished)

AHMED BHAYO, BILAWAL (2015) AN EXPERIMENTAL INVESTIGATION ON PERFROMANCE ASSESSMENT OF S-ROTORS FOR STAND-ALONE WIND POWER SYSTEM. Masters thesis, Universiti Teknologi PETRONAS.

AHMED YASSEN, TADAHMUN (2015) DEVELOPMENT AND EVALUATION OF SOLAR THERMAL HYBRID DRYING SYSTEM. PhD. thesis, Universiti Teknologi PETRONAS.

AL BATATI, NABIL (2015) SIMULATION OF DRILL STRING VIBRATION DUE TO RISER'S OSCILLATION. Masters thesis, Universiti Teknologi PETRONAS.

AZIZ AL-WAKEEL, HAITHAM BEHNAM (2015) INVESTIGATION OF LOCALIZED RAPID SOOT OXIDATION USING METALASSISTE HIGH FREQUENCY ELECTROMAGNETIC HEATING. PhD. thesis, Universiti Teknologi PETRONAS.

Ab Rahim, Eleena Aqmal (2015) Simulation Study on Braided Hose Failure in Major Equipment at PETRONAS Carigali Sdn Bhd (PCSB). [Final Year Project] (Unpublished)

Abd Aziz, Mohd Naqiuddin Afiq (2015) Dynamic Loading on Carbon Fiber Wind to HDPE Composite Pipe (CFWHCP). [Final Year Project] (Unpublished)

Abd Rashid, Muhammad Afiq (2015) Oil Demand Forecasting in Malaysia in Transportation Sector using Artificial Neural Network (ANN). [Final Year Project] (Unpublished)

Abd. Malek, Ammar Ariffin (2015) Hydrostatic Burst Test of Multi-Angle Filament Wound Composite Pipe. [Final Year Project] (Unpublished)

Adnan, Muhammad Adham (2015) Influence of Heat Treatment Process on Carbon Steel Pipe Corrosion in The Presence of Carbon Dioxide, CO2 and Acetic Acid, HAc. [Final Year Project] (Unpublished)

Ahmad Zahidin, Amirul Ariffin (2015) Demulsification of MIRI Crude Emulsion using Aeration. [Final Year Project] (Unpublished)

Ahmad Zolkiffli, Athira (2015) NOZZLE ATOMIZATION IMPROVEMENT THROUGH CHANNEL REDESIGN. [Final Year Project] (Unpublished)

Alexander, Alan Arulandom (2015) Study of Sound Wave as a Flame Extinguisher. [Final Year Project] (Unpublished)

Amer, Mohamad Izat Fikri (2015) Gas-Liquid Separation in T-Junction. [Final Year Project] (Unpublished)

Aminuddin, Ahmad Syahiq (2015) Design and Fabrication of Automatic Welding Manipulator for Oil and Gas Pipeline Welding. [Final Year Project] (Unpublished)

Ampuani@Azmei, Muhammad Redha (2015) DESIGN, FABRICATION, AND EXPERIMENTAL STUDY OF THE PERFORMANCE OF THERMOELECTRIC MODULES FOR COOLING OF A SINGLE ROOM TEST HOUSE. [Final Year Project] (Unpublished)

Aziz, Hammad Aziz (2015) Development of Metal-Oxide Fillers Reinforced Intumescent Fire Retardant Coating for Structural Applications. Masters thesis, Universiti Teknologi PETRONAS.

Azman, Muhamad Fahmi (2015) Development of Optimal Design Support System for Beam Structure. [Final Year Project] (Unpublished)

B

Basir, Muhammad Hisyamuddin (2015) Risk-Based Inspection Model for Heat Exchanger Tube Bundles. [Final Year Project] (Unpublished)

Bistamam, Nurfarah Liyana (2015) Investigation of Carbon Black Production from Waste Tyre Burning. [Final Year Project] (Unpublished)

C

Che Wan Zaiki, Che Wan Juwairiah (2015) Experimental Study of Renewable Energy for Solar Parking in Universiti Teknologi PETRONAS (UTP). [Final Year Project] (Unpublished)

Choong, Weng Hong (2015) Effect of Tool Pin Profiles on the Weldment of AA6061-T6 Friction Stir Welded Plate. [Final Year Project] (Unpublished)

Chow , Xuan Hui (2015) Quasi Static Axial Loading on Carbon fiber wind to HDPE Composite Pipe (CFWHCP). [Final Year Project] (Unpublished)

D

DAUDA MUHAMMAD, IBRAHIM (2015) NON-LINEAR FINITE ELEMENT MODELING OF MECHANICAL BEHAVIOR OF SINGLE-WALLED CUBIC ZIRCONIA NANOTUBES. PhD. thesis, Universiti Teknologi PETRONAS.

Dhuban, Salem Omar Abdullah (2015) Effect of Fiber Orientation and Ply-Stacking Sequence on Buckling Behaviour of Basalt/Epoxy and Basalt-Carbon/Epoxy Composite Laminates. [Final Year Project] (Unpublished)

Dius, Weltson (2015) Experimental Evaluations of a Novel Invented Wind Turbine for Solar Chimney Power Plant. [Final Year Project] (Unpublished)

F

FERN FERN, RACHAEL TAN (2015) Rag Layer Formation and Stability of Crude Oil Emulsion Under Different Imposed Mechanical Energy and Temperatures. [Final Year Project] (Unpublished)

Fauzi, Mohamad Azrin (2015) Study of the Cutter Design of PDC Drill Bits on Effect of Back Rake Angle and Size of the Cutter on Wear Rate. [Final Year Project] (Unpublished)

G

GERARD , SUE WEI PING (2015) Monotonic Burst Pressure of Non-Metallic Filament Wound Composite Pipe. [Final Year Project] (Unpublished)

H

HOW, KEK JIA (2015) Axial Vibration Analysis on Drillstring. [Final Year Project] (Unpublished)

HUAT, TAN CHEE (2015) Fluid-Structure Interaction of Multiphase Flow within a Pipe Bend. [Final Year Project] (Unpublished)

Hasan, Muhammad Nur Helmi (2015) CFD Simulation of the Aerodynamic Drag of Personal Electric Vehicles (PEV). [Final Year Project] (Unpublished)

Hasbollah, Yasmin Alia (2015) Heat Transfer Performance of a Rotating Phase Change Material (PCM) based Thermal Energy Storage (TES). [Final Year Project] (Unpublished)

Hasnain, Syed Ali (2015) Numerical Investigation on the Effect of Down Stand Structure on Smoke Contamination in Atrium Upper Balconies. Masters thesis, Universiti Teknologi PETRONAS.

Hasni, Hadri (2015) Estimating Pump Reliability using Recurrent Data Analysis for Failure Modes. [Final Year Project] (Unpublished)

Heng, Yit Man (2015) Experimental Investigation of Roof Top Solar Chimney for Natural Ventilation. [Final Year Project] (Unpublished)

Hung, Tham Wai (2015) Effect of Limestone Catalyst on Production of Synthesis Gas in a Downdraft Co-Gasification of Coconut Frond and Wood Chips. [Final Year Project] (Unpublished)

Huong, Tang Mei (2015) CFD Simulation of Various Types of Solid Particles in Oil Pipe Flow to Evaluate the Pressure Losses. [Final Year Project] (Unpublished)

I

INAYAT, MUDDASSER (2015) PRELIMINARY STUDY OF CO-GASIFICATION OF DIFFERENT LIGNOCELLULOSIC BIOMASS IN BENCH SCALE REACTOR. Masters thesis, Universiti Teknologi PETRONAS.

Idris, Ali Abidin (2015) Pipeline Thermal Insulation for Malaysia’s Deepwater. [Final Year Project] (Unpublished)

Idris, Mohamad Anwar (2015) CONCEPTUAL AND PRELIMINARY DESIGN OF UNMANNED GROUND VEHICLE IN MONITORING OIL AND GAS PLANT. [Final Year Project] (Unpublished)

Ishak, Ariff Rahman (2015) A Study of Hybrid Solar Air Conditioning. [Final Year Project] (Unpublished)

Ismail, Nur Aliana (2015) Experimental Study on Electrical Power Generation from 1 kW Engine Using Simulated Biogas Fuel. [Final Year Project] (Unpublished)

J

Jamaludin, Hazirah (2015) Experimental Study on the Influence of Water-in-Diesel Emulsion (WiDE) Characterization on Microexplosion Occurrence. [Final Year Project] (Unpublished)

Johari, Muhammad Ismeth Amir (2015) The Microstructure, physical and mechanical properties of silicon carbide for high temperature wear application: An Experimental Observation. [Final Year Project] (Unpublished)

Jun Yen, Thomas Chin (2015) Design a Solar Hybrid Air Conditioning Compressor System. [Final Year Project] (Unpublished)

K

KHAN, MUHAMMAD HAMMAD (2015) REVISITING FANGER'S THERMAL COMFORT MODEL USING MEAN BLOOD PRESSURE AS A BIO-MARKER: AN EXPERIMENTAL INVESTIGATION. Masters thesis, Universiti Teknologi PETRONAS.

KHAW , YAO SHUN (2015) Ultrasonic wave application to crude oil de-emulsification process. [Final Year Project] (Unpublished)

KHOO, BOO KEAN (2015) EXPERIMENTAL AND NUMERICAL SIMULATION STUDY OF INDUCTOR FAULT BY INVESTIGATING WINDING CONTOUR. PhD. thesis, Universiti Teknologi PETRONAS.

Ku Ariffin, Ku Muhammad Faez (2015) Design and Development of Portable Hand-Crank Generator. [Final Year Project] (Unpublished)

L

Lutfullaev, Jamshid (2015) Preventive Maintenance & Replacement Scheduling Model for Repairable and Maintainable Systems. [Final Year Project] (Unpublished)

M

MD. IBRAHIM, NOR NURULHUDA (2015) DIFFUSION BONDING AND POST-BOND HEAT TREATMENT OF SIALON TO NITRIDED A lSI 420 STAINLESS STEEL. PhD. thesis, Universiti Teknologi PETRONAS.

MOHAMED TERMIZI, NOOR ANIZA (2015) THERMOGRAVIMETRIC KINETIC ANALYSIS OF POULTRY PROCESSING DEWATERED SLUDGE FOR THERMOCHEMICAL CONVERSION PROCESS. Masters thesis, Universiti Teknologi PETRONAS.

MOHAMMAD SAIF, MOHD AFIQ (2015) EVALUATION OF EFFECT OF INSULATION MATERIALS TO CORROSION RATE FOR CORROSION UNDER INSULATION (CUI). [Final Year Project] (Unpublished)

MOHD HALIMI, MUHAMMAD HAZIM (2015) Modeling and Simulation of a Free Floating PIG for Different Inclination Angle using CFD. [Final Year Project] (Unpublished)

MOHIDEEN BATCHA, MOHO FAIZAL (2015) AERODYNAMICS AND HYDRODYNAMICS OF A SWIRLING FLUIDIZED BED WITH SLOPED DISTRIBUTOR. PhD. thesis, Universiti Teknologi PETRONAS.

MONARSHAH, MUHAMMAD ALFIAN UMAR (2015) MATERIAL FLOW BEHAVIOUR DURING FRICTION STIR WELDING (FSW) OF NYLON PLATES. [Final Year Project] (Unpublished)

MUHIDDIN, MUHAMMAD HAKIM (2015) SIMULATION & VALIDATION OF BODY FRAMING ASSEMBLY LINE USING WITNESS. [Final Year Project] (Unpublished)

MUSTAFA, AYAD TAREQ (2015) INVESTIGATION AND EVALUATION OF DEVELOPED SOLAR VORTEX ENGINE. PhD. thesis, Universiti Teknologi PETRONAS.

Mahayadin, Hazeem (2015) Performance Study of Corrosion Inhibitors for CO2 Corrosion on Pre-Corroded Carbon Steel. [Final Year Project] (Unpublished)

Mashal, Al-afnaan (2015) Failure Mode Effect Analysis (FMEA) on Heat Recovery Steam Generator (HRSG): Water Tube Boiler. [Final Year Project] (Unpublished)

Masipa, Karabo (2015) Hot Corrosion Behavior of Thermal Spray Coating. [Final Year Project] (Unpublished)

Masrah, Mohammad Fadhil (2015) Life Prediction Model of Mechanical Seal Used In Offshore Installation. [Final Year Project] (Submitted)

Mat Din, Mohd Safwan (2015) Dynamics Of Rotor Supported By Magnetic Bearing. [Final Year Project] (Unpublished)

Mazhanash, Haziq Asiad (2015) Efficient Water Recycling Through Solar Distillation. [Final Year Project] (Unpublished)

Min, Teow Jing (2015) CFD study on Energy Promoter insertion for drag reduction in oil pipelines. [Final Year Project] (Unpublished)

Mohamad, Ahmad Ikram (2015) Correlation between Microstructure and Microhardness of Nitrided Austenitic Stainless Steel. [Final Year Project] (Unpublished)

Mohamed Talaat, Mohamed Farid (2015) Conceptual Development of non-conventional steam turbine. [Final Year Project] (Unpublished)

Mohd Asmadi, Mohd Amir (2015) Development of a Red Mud-Epoxy Intumescent Coating for Steel Structures. [Final Year Project] (Unpublished)

Mohd Fozi, Muhammad Ariffullah (2015) Effect of Vibration on Human Body. [Final Year Project] (Submitted)

Mohd Ishak, Muhammad Asroldin (2015) Microstructural Evolution and Physical Properties Changes during Liquid Phase Sintering of Fe-Cu-C Compacts. [Final Year Project] (Unpublished)

Mohd Ismail, Abu Bakar Sidiq (2015) Study on Tensile Strength of SS304 Steel Weld Joint with Different Bevel Angles. [Final Year Project] (Unpublished)

Mohd Jafri, Mohamad Sharul Affendi (2015) Design and Development of Hybrid Portable Mini Wind Turbine. [Final Year Project] (Unpublished)

Mohd Kasim, Muhammad Zulfaqqar (2015) Fatigue Life Analysis of Holed Component in Aircraft Stuctures. [Final Year Project] (Unpublished)

Mohd Nadzim, Mohd Fathur Rahman (2015) Evaluation of Heat Transfer Performance of Helical Coil Heat Exchanger. [Final Year Project] (Unpublished)

Mohd Radzman, Mohamad Aizat (2015) Study of the Mechanical & Sound Absorption Properties of Natural Fibre (Corn Husks) as Reinforced Composite. [Final Year Project] (Unpublished)

Mohd Rafee, Nor Syazwani (2015) Simulation of Flow Characterization in Corrosion Test Rig of Thin Channel Flow Cell (TCFC). [Final Year Project] (Unpublished)

Mohd Sagi, Khairuzzikri (2015) Product Families Development and Simulation of Well Completion System Products by Using Business Simulation Software. [Final Year Project] (Unpublished)

N

NANIMINA, ALEXIS MOUANGUE (2015) POWDER-MIXED ELECTRICAL DISCHARGE MACHINING OF BIOMEDICAL AND INDUSTRIAL GRADE ALLOYS. PhD. thesis, Universiti Teknologi PETRONAS.

Nasindram, N.Diviniya (2015) The Effect of Time during Post Weld Heat Treatment (PWHT) on Mechanical Properties of Copper Alloy with Gas Metal Arc Welding (GMAW). [Final Year Project] (Unpublished)

Nasir Gathoth Subroto, Affan (2015) THE ANALYSIS OF PDC CUTTER CHARACTERISTIC IN HARD FORMATION DRILLING RELATING TO WEAR (BACK & SIDE RAKE ANGLE). [Final Year Project] (Unpublished)

Nazarudin, Muhammad Amir Adli (2015) Run River Pico-Hydro System from Water Treatment Effluent Discharge. [Final Year Project] (Unpublished)

Noor Azmi, Nur Amilia (2015) A Study of Preferential Weld Corrosion in the Presence of Carbon Dioxide and Acetic Acid. [Final Year Project] (Unpublished)

O

Omar Bayagoob, Ashraf Yaaqob (2015) Nano Electrochemical Polishing of Titanium Alloy using Ionic Liquid. [Final Year Project] (Unpublished)

Ong , Chuan Faith (2015) Parametric Study on Steam Generation of Heat Recovery Steam Generator at 2 × 4.2MW District Cooling Plant. [Final Year Project] (Unpublished)

Osman, Muhammad Hafizuddin (2015) INVESTIGATION OF REMAINING USEFUL LIFE OF GAS TURBINE BLADE. [Final Year Project] (Unpublished)

P

Past Year Exam Question (2015) FAM0025 LINEAR PROGRAMMING & CALCULUS. [Past Year Examination Question]

Past Year Exam Question (2015) MBB1052 MCB1012 MDB1022 INTRODUCTION TO MATERIALS SCIENCE. [Past Year Examination Question]

Past Year Exam Question (2015) MBB3054 MANUFACTURING SYSTEM & OPERATIONS. [Past Year Examination Question]

Past Year Exam Question (2015) MBB4023 MCB3103 VIBRATION. [Past Year Examination Question]

Past Year Exam Question (2015) MBB4233 REFRIGERATION AND AIR-CONDITIONING. [Past Year Examination Question]

Past Year Exam Question (2015) MBB4413 MCB4413 ADVANCED ENGINEERING MATERIALS / NANO MATERIALS. [Past Year Examination Question]

Past Year Exam Question (2015) MBB4413 MCB4413 NANO MATERIALS. [Past Year Examination Question]

Past Year Exam Question (2015) MBB4433 MCB4433 FAILURE ANALYSIS AND NON-DESTRUCTIVE EXAMINATION. [Past Year Examination Question]

Past Year Exam Question (2015) MCB 3033 HEAT TRANSFER. [Past Year Examination Question]

Past Year Exam Question (2015) MCB1012 MDB1022 INTRODUCTION TO MATERIAL SCIENCE. [Past Year Examination Question]

Past Year Exam Question (2015) MCB1033 MDB1033 ELECTRICAL POWER AND MACHINES. [Past Year Examination Question]

Past Year Exam Question (2015) MCB2013 FLUID MECHANICS I. [Past Year Examination Question]

Past Year Exam Question (2015) MCB2013 FLUID MECHANICS I. [Past Year Examination Question]

Past Year Exam Question (2015) MCB2043 DYNAMICS. [Past Year Examination Question]

Past Year Exam Question (2015) MCB2043 MDB2043 DYNAMICS. [Past Year Examination Question]

Past Year Exam Question (2015) MCB2053 MDB2053 FLUID MECHANICS II. [Past Year Examination Question]

Past Year Exam Question (2015) MCB2063 MDB2063 MECHANICAL ENGINEERING THERMODYNAMICS II. [Past Year Examination Question]

Past Year Exam Question (2015) MCB3013 CONTROL SYSTEMS. [Past Year Examination Question]

Past Year Exam Question (2015) MCB3013 CONTROL SYSTEMS. [Past Year Examination Question]

Past Year Exam Question (2015) MCB3023 ENGINEERING MATERIALS. [Past Year Examination Question]

Past Year Exam Question (2015) MCB3023 ENGINEERING MATERIALS. [Past Year Examination Question]

Past Year Exam Question (2015) MCB3033 HEAT TRANSFER. [Past Year Examination Question]

Past Year Exam Question (2015) MCB3043 MECHANICS OF MACHINES. [Past Year Examination Question]

Past Year Exam Question (2015) MCB3043 MECHANICS OF MECHINES. [Past Year Examination Question]

Past Year Exam Question (2015) MCB3063 COMPUTER AIDED ENGINEERING. [Past Year Examination Question]

Past Year Exam Question (2015) MCB3063 COMPUTER AIDED ENGINEERING. [Past Year Examination Question]

Past Year Exam Question (2015) MCB3073 MANUFACTURING TECHNOLOGY II. [Past Year Examination Question]

Past Year Exam Question (2015) MCB3073 MANUFACTURING TECHNOLOGY II. [Past Year Examination Question]

Past Year Exam Question (2015) MCB3073 MANUFACTURING TECHNOLOGY II. [Past Year Examination Question]

Past Year Exam Question (2015) MCB3083 MECHANICAL ENGINEERING DESIGN. [Past Year Examination Question]

Past Year Exam Question (2015) MCB3083 MECHANICAL ENGINEERING DESIGN. [Past Year Examination Question]

Past Year Exam Question (2015) MCB3083 MECHANICAL ENGINEERING DESIGN. [Past Year Examination Question]

Past Year Exam Question (2015) MCB3092 MECHATRONICS. [Past Year Examination Question]

Past Year Exam Question (2015) MCB3103 MBB4023 VIBRATION. [Past Year Examination Question]

Past Year Exam Question (2015) MCB4213 ENERGY CONVERSION. [Past Year Examination Question]

Past Year Exam Question (2015) MCB4213 ENERGY CONVERSION. [Past Year Examination Question]

Past Year Exam Question (2015) MCB4223 ENERGY MANAGEMENT. [Past Year Examination Question]

Past Year Exam Question (2015) MCB4423 CORROSION ENGINEERING. [Past Year Examination Question]

Past Year Exam Question (2015) MCB4423 MBB4423 CORROSSION ENGINEERING. [Past Year Examination Question]

Past Year Exam Question (2015) MCB4513 FLOW ASSURANCE IN PIPELINES AND FLOW-LINES. [Past Year Examination Question]

Past Year Exam Question (2015) MCB4523 SUB-SEA ENGINEERING. [Past Year Examination Question]

Past Year Exam Question (2015) MCB4523 SUB-SEA ENGINEERING. [Past Year Examination Question]

Past Year Exam Question (2015) MCB4613 MBB4513 FACILITIES ENGINEERING, TRANSPORT AND STORAGE. [Past Year Examination Question]

Past Year Exam Question (2015) MCB4623 PLANT EQUIPMENT DESIGN. [Past Year Examination Question]

Past Year Exam Question (2015) MCB4633 PLANT EQUIPMENT MAINTENANCE AND RELIABILITY. [Past Year Examination Question]

Past Year Exam Question (2015) MCB4633 PLANT EQUIPMENT MAINTENANCE AND RELIABILITY. [Past Year Examination Question]

Past Year Exam Question (2015) MDB1033 ELECTRICAL POWER AND MACHINES. [Past Year Examination Question]

Past Year Exam Question (2015) MDB1053 MCB1053 STATICS. [Past Year Examination Question]

Past Year Exam Question (2015) MDB1053 STATICS. [Past Year Examination Question]

Past Year Exam Question (2015) MDB2023 MECHANICAL ENGINEERING THERMODYNAMICS I. [Past Year Examination Question]

Past Year Exam Question (2015) MDB2023 MECHANICAL ENGINEERING THERMODYNAMICS I. [Past Year Examination Question]

Past Year Exam Question (2015) MDB2034 MCB2034 MBB2043 SOLID MECHANICS. [Past Year Examination Question]

Past Year Exam Question (2015) MDB2034 MCB2034 SOLID MECHANICS. [Past Year Examination Question]

Past Year Exam Question (2015) MDB2053 MCB2053 MBB2063 FLUID MECHANICS II. [Past Year Examination Question]

Past Year Exam Question (2015) MDB2063 MECHANICAL ENGINEERING THERMODYNAMICS II. [Past Year Examination Question]

Pauzi, Muhamad Farith (2015) Study of Low Stiffness Resilient Shaft (LSRS). [Final Year Project] (Unpublished)

R

Rahmad, Muhammad Faruqi (2015) Risk-based Inspection Model for Atmospheric Storage Tank. [Final Year Project] (Unpublished)

Ramadan, Wani James (2015) Enhancement of refrigeration performance with an ejector. [Final Year Project] (Unpublished)

Ramasamy, Guna (2015) Determination Of Optimum Proportional-Integral-Derivative (PID) Controller Gain Values For Autonomous Underwater Vehicle (AUV). [Final Year Project] (Unpublished)

Ramlan, Nur Amalina (2015) Effect of Physical Fiber Lay of FRP Winding Composite on Mechanical Properties. [Final Year Project] (Unpublished)

Rao, Syam Sundhara (2015) DYNAMIC RESPONSE OF SPAR PLATFORM SECURED WITH MOORING SYSTEM USING ANSYS-AQWA. [Final Year Project] (Unpublished)

Riswan, Fatin Nabilah (2015) Investigation on Effect of Distance between Tanks on Fire Spread in Oil Refinery. [Final Year Project] (Unpublished)

Rizlan, Muhamad Zulkhairi (2015) Nanoparticles Production of Tronoh Silica Sand via Low Speed Mechanical Milling Process. Masters thesis, Universiti Teknologi PETRONAS.

Rodzi, Mohd Faiz (2015) Front End Engineering Design for Offshore Facility Equipment. [Final Year Project] (Unpublished)

Roslan, Muhammad Hafiz (2015) INVESTIGATION OF FIRE RESISTANT PROPERTIES OF GLASSWOOL AND ROCKWOOL HYBRID FIBRE REINFORCED INTUMESCENT COATING. [Final Year Project] (Unpublished)

Roslan, Rozanna (2015) Effect of Different Roof Materials on Energy Savings and Carbon Dioxide Reductions for Rainwater Harvesting Systems. [Final Year Project] (Unpublished)

Ruba’ai, Nur Amira (2015) A Study on the Performance of Splash Zone. [Final Year Project] (Unpublished)

Ruslan, Razin Akmal (2015) Energy Harvesting Using Mechanical Absorber. [Final Year Project] (Unpublished)

S

SAFIYULLAH, FEROZKHAN (2015) COMPUTATIONAL MODELING OF GAS COMPRESSOR DIAGNOSTICS USING GENETIC PROGRAMMING. Masters thesis, Universiti Teknologi PETRONAS.

SHAO ZHE, JOSH WONG (2015) Optimization Strategy & Energy Savings Of Water-Cooled Chiller Plant System. [Final Year Project] (Unpublished)

SULAIMAAN, ISFAHAN AMIN (2015) DESIGN AND HEAT TRANSFER ANALYSIS OF A FINNED INNER TUBE DOUBLE PIPE HEAT EXCHANGER. [Final Year Project] (Unpublished)

Sadig, Hussain (2015) The Effect of Producer Gases on The Performance and Emissions of a Micro-Gas Turbine. Doctoral thesis, Universiti Teknologi PETRONAS.

San, Lye Siew (2015) Design and Fabrication of Curb-Climbing Mechanism for a Wheelchair using 3D Printing Technology. [Final Year Project] (Unpublished)

Saniman, Amir Hakim (2015) STUDY OF RELATION BETWEEN PIN TOOL GEOMETRY WITH FORMATION OF WORMHOLE IN FSW OF ALUMINUM AA5083. [Final Year Project] (Unpublished)

Sarifuddin, Siti Norakma (2015) Optimization of Mechanical Properties in Natural Hybrid Polymer Composite using Polypropylene (PP), Banana Stem Fiber (BS) and Pineapple Leaf Fiber (PALF). [Final Year Project] (Unpublished)

Shirazi, Muhammad Irfan (2015) Shear Induced Fiber Orientation in Metal Injection Molded Carbon Fiber Reinforced Copper Composite. Masters thesis, Universiti Teknologi PETRONAS.

Sunif, Muhammad Amri Bahri (2015) Investigation of Friction Stir Welding Tool Wear on Different Hardening Method. [Final Year Project] (Unpublished)

Syukri, Muhamad Safuan (2015) Thermal Simulation of Different Welding Speed and Metal Thickness for Butt-Joint Welding with ANSYS. [Final Year Project] (Unpublished)

T

Tajuddin, Noraiman (2015) Design, Construction and Experimental Analysis of Free Floating Pig for Pipeline Leak Detection. [Final Year Project] (Unpublished)

U

UL MUSTAFA, MUHAMMAD ZIA (2015) SYNERGISTIC EFFECTS OF SILICATE MINERAL FILLERS REINFORCED INTUMESCENT FIRE RETARDANT COATING FOR STRUCTURAL APPLICATIONS. Masters thesis, Universiti Teknologi PETRONAS.

UMAR ALKALI, ADAM (2015) INVESTIGATION OF THERMALLY ENHANCED MACHINING ON MACHINABILITY OF 316L STAINLESS STEEL USING OXYACETYLENE FLAME AS HEAT SOURCE. PhD. thesis, Universiti Teknologi PETRONAS.

V

Vern, Kong Kai (2015) Effect of Size and Shape of PDC Cutter on Wear Rate in Multi Layer Formation. [Final Year Project] (Unpublished)

W

Wee, Kelvin Ting (2015) 3D Reconstruction Using Light Field Camera. [Final Year Project] (Unpublished)

Y

YAO, HOR WENG (2015) Assessment of Imperfect Heater Contact due to in-situ Pyrolysis of Oil Shale. [Final Year Project] (Unpublished)

YAZID, EDWAR (2015) SLOW DRIFT MOTIONS IDENTIFICATION OF FLOATING STRUCTURES USING TIME-VARYING INPUT -OUTPUT MODELS. PhD. thesis, Universiti Teknologi PETRONAS.

YOUSIF ABDALLA, ABDULRAHMAN (2015) NEWTONIAN AND NON-NEWTONIAN FLOW IN STRAIGHT AND CURVED PIPES. Masters thesis, Universiti Teknologi PETRONAS.

YOUSIF IBRAHIM, ALAELDEEN ALTAG (2015) THE EFFECT OF C:H RATIO OF FUEL IN CENTRALLY IGNITED LAMINAR FLAME. PhD. thesis, Universiti Teknologi PETRONAS.

Yaakub, Syamilah (2015) Analysis on Effect of Wheel Size in PEV Performance. [Final Year Project] (Unpublished)

Yi, Kong Yien (2015) Effect of Back Rake Angle and Shape of PDC Cutter On Wear Rate In Hard Formation. [Final Year Project] (Unpublished)

Z

ZAINAL, MUHAMMAD HAZIQ (2015) EVALUATION OF THE IMPACT OF OPERATING TEMPERATURE TO CORROSION RATE FOR (CUI). [Final Year Project] (Unpublished)

Zukifli, Muhamad Nur (2015) Numerical Analysis of Hybrid Composite Piping for Oil and Gas Application. [Final Year Project] (Unpublished)

This list was generated on Thu Mar 28 04:06:06 2024 +08.