Browse by Type

ARULNATHAN, JONATHAN (2018) VCO DEVELOPMENT USING 130nm CMOS TECHNOLOGY. [Final Year Project]

MOHD NORHAKIM, NURUL NADIA HAFIZA (2018) ION-INDUCED DNA GRAPHENE FIELD EFFECT TRANSISTOR CURRENT MODULATION. [Final Year Project]

Tan, Meng Han (2018) Development of AHP Decision Model for Facility Location Selection in Malaysia. [Final Year Project] (Submitted)

Ngai, Seak Jie (2018) Experimental Investigation of the Performance of CPC under Local Weather Condition. [Final Year Project] (Submitted)

binti Selamat , Nurulnazihah (2018) Evaluation on Irrigation System of Paddy Field for Rice Production in Tropical Climate: Case Study at FELCRA SEBERANG PERAK. [Final Year Project] (Submitted)

BINTI KA’AB , HAMIZAH (2018) WATER QUALITY IMPROVEMENT THROUGH TROPICAL LANDSCAPE PLANT FOR BIORETENTION FACILITIES. [Final Year Project] (Submitted)

Firdaus, Ahmad ‘Adnin (2018) Sustainable Assessment of Academic Buildings at Universiti Teknologi Petronas Campus. [Final Year Project] (Submitted)

bt Wan Yahya, Wan Nur Syahirah (2018) Geospatial Prediction of Soil Erosion in Cameron Highlands Using Decision Tree Technique. [Final Year Project] (Submitted)

BINTI MOHD NAZRIN , ALIAA ATHIRAH (2018) Column Study for Removal of Colour from Palm Oil Mill Effluent using Wastewater Sludge Carbon. [Final Year Project] (Submitted)

BIN AHMAD FAUZI , AHMAD SUHAIL (2018) Experimental Study on Radial Interacting Corrosions in Pipelines. [Final Year Project] (Submitted)

BIN SHAIFUL BAHRIN , SYAQIF HAZIM (2018) EXTERNAL IMPACT OF CONCRETE MATTRESS ON CARBON STEEL PIPE. [Final Year Project] (Submitted)

Bin Mohd Hawari , Muhammad Hanif (2018) ACCIDENT ANALYSIS ON IPOH-LUMUT HIGHWAY. [Final Year Project] (Submitted)

SUET TING , SAMANTHA LIM (2018) NUMERICAL MODELLING ON VEHICLE DYNAMIC STABILITIES IN LOW-LYING FLOOD AREAS. [Final Year Project] (Submitted)

SHUN HUI , SEBASTIAN YOENG (2018) 2D GROUND MOVEMENT SIMULATION DUE TO TUNNEL EXCAVATION USING FINITE ELEMENT METHOD. [Final Year Project] (Submitted)

Binti Amran , Nur Afiqah (2018) Column Study for the Removal of Colour from Batik Printing Effluent using Wastewater Sludge Carbon. [Final Year Project] (Submitted)

Zulkiflee, Nurul Nabilah Husna (2018) Effect of Nanoparticles Concentration on Zinc Oxide-Iron (III) Oxide Hybrid Nanofluid for Enhanced Oil Recovery. [Final Year Project]

MOHD SAIDI, AIMI AYUNI (2018) SIMULATION STUDY OF LOW VELOCITY IMPACT ON SOLAR PHOTOVOLTAIC PANEL. [Final Year Project]

Ku Aizuddin, Ku Muhammad Azeem (2018) SYNERGYSTIC EFFECTS OF WOLLASTONITE AND KAOLIN CLAY REINFORCED INTUMESCENT FIRE RETARDANT COATING FOR WOOD PROTECTION. [Final Year Project]

Ahmad Rahim, Farhana Aqilah (2018) Corrosion Mechanism Study on Welded Austenitic Stainless Steel. [Final Year Project]

Fikri, Afif (2018) Effect of Polylactic Acid (PLA) On Mechanical and Physical Properties of Polypropylene (PP). [Final Year Project]

A

A/L Arulnathan, Jonathan (2018) VCO DEVELOPMENT USING 130nm CMOS TECHNOLOGY. [Final Year Project]

Amirudin, Nurul Aisyah (2018) Detection and Analysis of Driver Drowsiness. [Final Year Project]

Azahar, Amir (2018) IoT Application: Flood and Water Pollution Monitoring by Using Image Processing. [Final Year Project]

Azman, Hakim Asyraf (2018) Design, Development and Implementation of Standalone Transmission Control Module for Mercedes-Benz 722.6 5G-Tronic Gearbox. [Final Year Project]

Abdullah, Fatin Kamilah (2018) Modelling of Solar PV Micro-inverter using Maximum Power Point Tracking (MPPT) Methods. [Final Year Project]

ABDUL KADIR, MOHD SAIFUL AKMAL (2018) DEVELOPMENT OF WIRELESS ELECTRICAL RESISTANCE TOMOGRAPHY. [Final Year Project]

ABD GHANI, NOOR SYAZANA (2018) BONE AGE ANALYSIS FROM BONE X-RAY. [Final Year Project]

Azlan, Nur Aainaa Nadirah (2018) Breast Cancer Detection by Artificial Intelligence Technologies. [Final Year Project]

AIYYAPPAN, VENU PRASAD (2018) Design and Simulation of a Z-Source Inverter for Electrical Vehicle Application. [Final Year Project]

Ahmad, Lina Kamilia (2018) Enhancement of Corrosion Resistance of Carbon Steel Using Gas Nitriding Technology. [Final Year Project] (Submitted)

Ahmad Al-Husna, Sabrina Ilmuna (2018) Active Collision Avoidance for Human – KUKA Robot Collaboration driven by Ultrasonic Sensor HC-SR04. [Final Year Project] (Submitted)

Ahmad Fauzi, Muhammad Fikri (2018) Enhancement the Life Time of Knife Made of Stainless Steel. [Final Year Project] (Submitted)

Abdul Halim, Ahmad Taufiq Hakim (2018) Investigations on Suitable Configurations for Optimum Four-Bar Mechanism Balancing of Crank Rocker Engine. [Final Year Project] (Submitted)

Azhari, Nurul Nabilah (2018) Simulation Study on Stress Analysis of Pipe Supported Round Bar PEEK due to Heavy Load. [Final Year Project] (Submitted)

Asad, Omar Abdullah (2018) Remote Access Vehicle Powertrain Simulation with Hardware Emulation. [Final Year Project] (Submitted)

Ahmad Pauzi, Ahmad Haziq Fitri (2018) DESIGN OF TESTING DEVICE FOR ASSESSMENT OF BOND BETWEEN PAVEMENT LAYERS ON MALAYSIAN ROAD CONSTRUCTION. [Final Year Project] (Submitted)

ABD SALIM, AMIRUL (2018) DETERMINING THE UNIQUE MICRO-EXPLOSION MECHANISM OF EMULSIFIED BIODIESEL FUEL PARENT DROPLET. [Final Year Project]

ADINAN, MUHAMAD FAIZAL (2018) DEVELOPMENT AND OPTIMIZATION OF HYBRID SPACE FRAME RACE CAR CHASSIS. [Final Year Project]

Azhari, Megat Ahmad ‘Izzuddin Putera (2018) Investigate the Application of Statistical Technique in Condition-Based Maintenance. [Final Year Project]

Aznan, Muhammad Hakeem (2018) Effect of Nanoparticles Concentration on Rheological Behavior of Silica-Fe3O4 Hybrid Nanofluid. [Final Year Project]

Ahmad Zukri, Muhammad Amir (2018) Simulation of Blood Flow in Coronary Artery. [Final Year Project]

Abdul Rahim, Muhamad Azrin Syaqir (2018) Corrosion Investigation On Dissimilar Friction Stir Welded Plates. [Final Year Project]

Abdul Rahim, Kama Shafik (2018) Characterization of Sound Absorption of Acoustic Sandwich Panels. [Final Year Project]

AHMAD BADRUDDIN, AHMAD AJWAD (2018) EXPERIMENTAL STUDY ON THE INDUSTRIAL BRAIDED HOSE FAILURE. [Final Year Project]

Azmi, Muhammad Adib Aiman (2018) Tensile Properties Study on AZ91D Magnesium Alloy through Gas Nitriding. [Final Year Project]

AZIZI, AZRI (2018) DEVELOPMENT OF NATURAL FIBER HONEYCOMB STRUCTURE USING INJECTION MOLDING. [Final Year Project]

Abdul Razak, Azrie (2018) Analysis on Resin Starvation Issue in Carbon Fibre on J-Nose Panel. [Final Year Project] (Submitted)

Azami, Adam Hazman (2018) Evaluation of Effective Current Output for Sacrificial Anodes at Various Sea Water Depth. [Final Year Project] (Submitted)

ALIAS, MOHAMMAD IZZAT (2018) NUMERICAL SIMULATION OF IN-CYLINDER HEAT TRANSFER LOSSES FROM DIESEL ENGINE. [Final Year Project] (Submitted)

Abdull Kadir, Nor Amirah (2018) Use of Analytic Hierarchy Process (AHP) For Selection of Corrosion under Insulation (CUI) Critical Inspection Locations. [Final Year Project]

Ahmad Zaini, Nur Hamizah (2018) Transient Analysis of Force Convective Solar Air Heater. [Final Year Project]

ABDALLA EBRAHEEM, AMMAR FAISAL (2018) Convective Cooling Enhancement in Electronic Systems by Using Vibration. [Final Year Project]

AHMAD KHAIRUL, AHMAD FAIDHIARIF (2018) STUDY ON THE MECHANICAL AND PHYSICAL PROPERTIES OF VACUUM BAGGING OF GLASS FIBRE-REINFORCED EPOXY COMPOSITE. [Final Year Project]

Abdalla Ebraheem, Omer Faisal (2018) Application of Nanomaterials in Luminescent Solar Concentrator to Reduce Re-Absorption Loss. [Final Year Project]

Amiruddin, Ahmad Yusuf (2018) CFD Investigation of General Electric Gas Turbine Wash Nozzle. [Final Year Project] (Submitted)

Ariffin, Nazura (2018) Industrial Gas Turbine Emission Diagnostic using Artificial Neural Network Regression. [Final Year Project]

AZMI, MUHAMMAD MERQHA’EL (2018) EXPERIMENTAL PREDICTION OF THERMAL CONDUCTIVITY OF ETHYLENE GLYCOL SILVER BASED NANOFLUID. [Final Year Project]

Arsad, Naidatul Zamrizam (2018) Experiment on New Configuration of Hybrid Offshore T-junction to Remove Liquid Carryover. [Final Year Project]

Ali, Nurhafeezah (2018) Finite Element Stress Analysis of Basalt/Epoxy and Carbon/Epoxy Composite Laminate with Varying Hole Configuration. [Final Year Project] (Submitted)

Azahar, Muhammad A’fif Mursyidi (2018) Development of Multiple Array Vertical Wind Turbine. [Final Year Project] (Submitted)

Ahmat, Ummi Amirah Afini (2018) Evaluation of Causes of Delays in Construction Project: Towards Effective Project Management. [Final Year Project] (Submitted)

AL-MAQDAMI, MOHAMMED AHMED HUSSEIN (2018) Effect of NaOH Molarity and Na2SiO3/NaOH on Mechanical Properties of Ambient Cured Fiber Reinforced Geopolymer Composites. [Final Year Project] (Submitted)

Ali Anwar, Nurfadhilah (2018) The Effects Of Blast Load On The Dynamic Behaviour Of Corroded Offshore Structure. [Final Year Project] (Submitted)

Ahmad Rosli, Nur Sakinah (2018) INVESTIGATION ON THE INFLUENCE OF SEAGRASS BED ON FRICTIONAL EFFECT IN COASTAL AREA. [Final Year Project] (Submitted)

B

bin Mustafa, Muhammad Bunyamin (2018) Corrosion Damage Assessment Of Aged Offshore Structures. [Final Year Project] (Submitted)

bin Abdul Hadi, Muhammad Zulkarnain (2018) The Effect of NaOH Molarity and Nano Silica on Mechanical Properties of Ambient Cured PVA Fiber Reinforced Geopolymer Concrete. [Final Year Project] (Submitted)

Binti Ahmad Nazari, Nadia Athirah (2018) Recycle Ground Water Treatment Plant Sludge for Advanced Oxidation Process to treat Batik Wastewater. [Final Year Project] (Submitted)

BINTI BORHANUDDIN , FARAH FATEHA (2018) WATER QUALITY MONITORING ALONG JOHAN RIVER IN PERAK. [Final Year Project] (Submitted)

b. Shamsuddin, Mohd Norsham Sazwan (2018) The Influence of Activity – Travel Behaviour on Individual’s Physical Health Condition. [Final Year Project] (Submitted)

Bin Zailani , Omar Haziq (2018) Effectiveness of Piled Row Breakwater as a Potential Coastal Protection Measure. [Final Year Project] (Submitted)

Bin Subari, Syamim Haikal (2018) VIBRATION CONTROL OF ICE-INDUCED LOADING ON JACKET PLATFORM BY USING STEEL RUBBER VIBRATION ISOLATOR. [Final Year Project] (Submitted)

Bin Mohamad Nor , Muhammad Fadhil (2018) Assessing Frequency Ratio Method for Soil Erosion Susceptibility Map in Cameron Highlands, Malaysia. [Final Year Project] (Submitted)

Bin Safee , Muhammad Aiman (2018) SCALING RATIO EFFECTS ON THE PREDICTION OF DYNAMIC MOTION ANALYSIS OF OFFSHORE FLOATING WIND TURBINES. [Final Year Project] (Submitted)

Bin Ismail , Ahmad Iqbal Khairi (2018) Plastic Waste as Cement Replacement in Brick Application. [Final Year Project] (Submitted)

Binti Mansor , Auni Syamimi (2018) Prediction of Suspended Sediment in Batang Padang River using Probabilistic Analysis. [Final Year Project] (Submitted)

BT FAZLI , NURULAIN FATEHAH (2018) ADSORPTION OF ORGANIC MATTER FROM PEAT WATER BY USING GOETHITE AS ADSORBENT. [Final Year Project] (Submitted)

BINTI SAIFUL BAHRI, HIDAYAH (2018) IMPACT OF LEACHATE DISCHARGED FROM PAPAN LANDFILL TO JOHAN RIVER WATER QUALITY. [Final Year Project] (Submitted)

Binti Abd Razak, Nurul Nabeela Binti Abd Razak (2018) Evaluation of Design and Analysis of Urban Stormwater Drainage System Using XP-SWMM. [Final Year Project] (Submitted)

BIN MULIANA, MUHAMMAD FAREEZ (2018) COMPACTION PROPERTIES OF ORGANIC FOAMING WARM MIX ASPHALT. [Final Year Project] (Submitted)

Basri, Muhammad Syahimie (2018) Evaluation of Subsurface Module Performance in Flow Resistance and Water Quality Improvement. [Final Year Project] (Submitted)

C

CHIN YII, EU (2018) POLYP SEGMENTATION IN COLONOSCOPY IMAGES. [Final Year Project]

CHETTIAR KAVANDAN, PUVENTIRAN (2018) AN AUTOMATED MATERIAL HANDLING PLC-BASED CONTROL SYSTEM VIA SEQUENTIAL FUNCTION CHART WITH IoT IMPLEMENTATION. [Final Year Project]

Chia , Calvin Sze Ming (2018) Performance and Operational Strategies Evaluation for Electric Chillers at UTP GDC Plant. [Final Year Project] (Submitted)

CHAN, GEORGE WEI XIANG (2018) DEVELOP OF KNOWLEDGE-BASED SYSTEM (KBS) TO MANAGE CORROSION UNDER INSULATION (CUI). [Final Year Project] (Submitted)

CHAN , KEITH QI LONG (2018) DESIGN OF PLANAR MICROSTRIP DIPLEXER. [Final Year Project]

Cheikhna , Sidi Mohamed (2018) A New Divergence Method for Plane Strain Element. [Final Year Project] (Submitted)

CHE ISMAIL , CHE MOHAMAD AMIRUS SHAFUAN (2018) AFFECT OF ACTIVITY TRAVEL BEHAVIOR, AND TRANSIT ORIENTED DEVELOPMENT (TOD) ON SUBJECTIVE WELL BEING. [Final Year Project] (Submitted)

CHOU, CHOONG YOU (2018) TECHNO-ECONOMIC ANALYSIS OF SOLAR FLAT-PLATE COLLECTOR WORKING WITH NANOFLUID. [Final Year Project]

CHOY, JAN FUNG (2018) CAPACITY AND COP ANALYSIS OF DOUBLE EFFECT STEAM ABSORPTION CHILLERS USING ZERO ORDER MODEL. [Final Year Project]

Chua, Daniel Chong Jing (2018) Plasma Engine for Aircraft. [Final Year Project]

CHELLIAH, EDWIN RAKESH (2018) PERFORMANCE INVESTIGATION OF A THERMOELECTRIC COOLING SYSTEM FOR BUILDINGS. [Final Year Project] (Submitted)

CHOU, CHOONG YOU (2018) TECHNO-ECONOMIC ANALYSIS OF SOLAR FLAT-PLATE COLLECTOR WORKING WITH NANOFLUID. [Final Year Project] (Submitted)

Chu, Kai Jing (2018) PERFORMANCE INVESTIGATION OF AN ELECTRO ADSORPTION CHILLER. [Final Year Project]

Clayton, Corinna Omnie (2018) Parametric Study on Incremental Wave Analysis for Jacket Platform in Malaysian Waters. [Final Year Project] (Submitted)

Chua, Siong Chin (2018) Extraction and Application of Sesbania Seed Gum (SSG) in CoagulationFlocculation Process. [Final Year Project] (Submitted)

Chia, Wee Khuan (2018) Sustainable Design for Environmental Disaster. [Final Year Project] (Submitted)

D

DEMPI, CHRISTIE BANGI (2018) CORROSION DAMAGE ANALYSIS USING IMAGE PROCESSING. [Final Year Project]

Damat, Nicodemus (2018) Development of Flood Monitoring System. [Final Year Project]

DAVE, NAVIN (2018) HEAT TRANSFER ENHANCEMENT IN A DOUBLE PIPE GEOTHERMAL WELL. [Final Year Project] (Submitted)

DA CRUZ JEQUICENE, JÉRSICA OKSANA (2018) Performance Efficiency of a Porous Breakwater. [Final Year Project] (Submitted)

F

Felix, Titosse Moises (2018) Ambient Light Monitoring and Control Using Internet of Things. [Final Year Project]

Francis Xavier, Jeffry Christopher (2018) Investigation of Thermosiphoning Operation in Compound Parabolic Concentrating Solar Collector Integrated With Evacuated Flow Through Receiver. [Final Year Project]

G

Ganesan, Vinondiran (2018) IOT Application in High Frequency Measurement. [Final Year Project]

George Mathew, Theodora Thomas (2018) Environmental Load Variations for the Three Malaysian Offshore Regions. [Final Year Project] (Submitted)

H

HASSAN, AHMAD AIMAN (2018) MONITORING AND CHARGING OF WHEELCHAIR BATTERIES BASED ON INTERNET OF THINGS (IOT). [Final Year Project]

HELMEE, FATIN ZAFIRAH (2018) MULTI-HOP WIRELESS SENSOR NETWORKS FOR REMOTE MONITORING OF SOIL MOISTURE. [Final Year Project]

HANAPI, MOHAMAD AMIRUL IEZHAM (2018) INTERNET OF THINGS SOIL MOISTURE TESTING AND MONITORING FOR EARTHING SYSTEM. [Final Year Project]

Hashim, Muhammad Adib (2018) Creep in Oedometer for Marine Clay Soil. [Final Year Project] (Submitted)

HAZAIRI , HANS (2018) ANALYSIS AND PREDICTION OF GREENFIELD SURFACE SETTLEMENT IN KENNY HILL FORMATION FOR KVMRT. [Final Year Project] (Submitted)

HASIMY, MUHAMMAD HADZIM (2018) PROCESSING AND CHARACTERISATION OF RECYCLED PP/PET MICROFIBRILLAR COMPOSITES. [Final Year Project]

Hasbullah, Nurhamizah (2018) Development of Probabilistic Life Cycle Cost Model for Electric Chillers. [Final Year Project]

Hashim, Nur Aqilah (2018) INVESTIGATION ON THE EFFECT OF TSUNAMI WAVES ON INTEGRITY OF TARPON MONOPOD IN MALAYSIAN WATERS. [Final Year Project] (Submitted)

I

Ishak, Effa Affiana (2018) Framework to Enhance the Successful of Time Management in Construction Project. [Final Year Project] (Submitted)

Ishak, Nur Izzati (2018) Development of Mortar Brick Incorporated Dry and Wet Domestic Sludge. [Final Year Project] (Submitted)

J

Jaifani, Alphonsus Sam Rantucci (2018) Development of a Wearable Exoskeleton with Virtual Reality based Serious Games for Arm Rehabilitation. [Final Year Project]

JHEI XERN, ANG (2018) MOBILE INDOOR AND OUTDOOR LOCALIZATION AND GUIDANCE SYSTEM USING AUGMENTED REALITY. [Final Year Project]

JANURIN, MUHAMAD DANIAL HARUSSANI (2018) NON-INVASIVE TECHNIQUE FOR IDENTIFYING BEARING FAULTS IN INDUCTION MOTOR. [Final Year Project]

JUNAIDI, MUHAMMAD HAEKAL (2018) A STUDY ON USING NEUROFEEDBACK TO IMPROVE LEARNING ABILITIES FOR INTROVERTS. [Final Year Project]

Jalaluddin, Izzat Imran (2018) Buckling Behaviour analysis of composite pipes under pure axial compressive loading using ANSYS Software. [Final Year Project] (Submitted)

JALALUDIN, MOHD AMIR IZZAT (2018) Computational Fluid Dynamics (CFD) Simulation of Transitioning Slug Flow to Laminar Flow in Horizontal Pipeline. [Final Year Project] (Submitted)

Johari, Norjasmine Julyana (2018) Thermal Performance of Basalt Fibre Reinforced Polydimethylsiloxane Epoxy-based Intumescent Fire Retardant Coating. [Final Year Project] (Submitted)

Jong, Maliani (2018) TREATMENT OF HARVESTED RAINWATER USING BIOSAND FILTRATION SYSTEM WITH UV DISINFECTION. [Final Year Project] (Submitted)

K

Kamal, Khairunnisha (2018) Multi-input Power Converter for Renewable Energy System with Droop Current Sharing Technique. [Final Year Project]

Kamarudin, Muhammad Amir (2018) IoT application: 360 Smart Parking Guidance System by Using Image Processing. [Final Year Project]

KAMARUDDIN, ERNA SHAFFIQA (2018) VEHICLE CLASSIFICATION FROM CCTV IMAGES AND VIDEOS. [Final Year Project]

Koo , Victor Zhao En (2018) CFD Simulation of Building Double Skin Façade on Building’s Thermal Comfort and Energy Saving. [Final Year Project] (Submitted)

KAUR, EESHA (2018) THE CHARACTERISTICS OF WATER-IN-BIODIESEL EMULSIONS PRODUCED USING ULTRASONIC HOMOGENIZER. [Final Year Project] (Submitted)

Kamaruddin, Siti Maryam (2018) CFD Simulation of Two-Phase Flow in Rectangular Conduit. [Final Year Project] (Submitted)

KHOR, JIE SHENG (2018) PERFORMANCE OF WASTE RESIDUAL PELLETIZED BIOMASS SOLID FUEL FROM MIXTURE OF COW DUNG AND PALM OIL FIBRE. [Final Year Project] (Submitted)

KHALID, MUHAMMAD HADIF AIMAN (2018) DEVELOPMENT OF AUTONOMOUS MODULAR AQUAPONIC SYSTEM. [Final Year Project]

Kathirasan, Yuktesvaranath (2018) Risk Analysis for Piping Systems Subject to Corrosion Under Insulation (CUI) Using Delphi Method. [Final Year Project]

Kunarajah, Kavinash Kumar (2018) Investigation on the Effects of Vertical Camera Placement on the Accuracy of Optical Plume Velocimetry. [Final Year Project]

KHAIRULANWAR, MOHAMAD KAMAL FIKRIN (2018) THE INFLUENCE OF ZINC OXIDE NANOPARTICLE ON THE MECHANICAL PROPERTIES OF GRAPHENE OXIDE EPOXY COMPOSITE COATING SYSTEM FOR PIPELINE APPLICATION. [Final Year Project]

Kumannan, Sukendran (2018) Feasibility Study on Gasification of Coconut Palm Fronds. [Final Year Project]

K. Balakrshnan, Vikneshwaran (2018) Fabrication of Compliant EP-FG Composite Automobile Shell Structure using Compression Moulding Process. [Final Year Project]

KA HEE, CHOONG (2018) INVESTIGATION ON AUTOMATED SYSTEM DESIGNS FOR ADHESIVE BONDING OPERATION. [Final Year Project]

Kamarulbakhrin, Satria Kamarin Azrai (2018) CFD Simulation of Air Flow Motion for FPLG Gas Exchange Process. [Final Year Project]

Khairul Nizam, Muhamad Azril Fazry (2018) Framework to Enhance the Implementation of Quality Management System in Construction Project. [Final Year Project] (Submitted)

L

LIM , ANDREW ZHI LUN (2018) Design and Synthesis of Surface Acoustic Wave Ladder-Type Filter With Prescribed Group Delay. [Final Year Project]

LOW, JUN XIAN (2018) ENERGY HARVESTING ENABLED IOT RIVER POLLUTION MONITORING SYSTEM USING LORA. [Final Year Project]

Lam , Zang Liang (2018) Mechanical Properties and Performance Evaluation of High Density Polyethylene (HDPE)/Glass Fiber Composite. [Final Year Project] (Submitted)

Lim, Gao Yih (2018) Application of Six Sigma Technique in Improving UTP Fabrication and Manufacturing Laboratory Performances. [Final Year Project] (Submitted)

Lee, Yuan Jake (2018) Experimental Study on impact of longitudinal reinforcement ratio on deformation capacity of self-compacting high strength concrete beam. [Final Year Project] (Submitted)

Leong, Jenifer Wei Yun (2018) Degradation of Plastic & Elastomers in Palm Oil based Biofuel. [Final Year Project] (Submitted)

Lee, Yin Yen (2018) Behaviour Of Engineered Cementitious Composite (ECC) Containing Crumb Rubber Particles Subjected To Elevated Temperature. [Final Year Project] (Submitted)

Lee, Jia Zheng (2018) The Effectiveness of Harden X on Surface Hardness of Lightweight Concrete. [Final Year Project] (Submitted)

Lee, Agnes Wan Wan (2018) Root Cause Analysis on Failure of Thermowell. [Final Year Project]

LI, CHUN PING (2018) Optical Modelling and Analysis of a Non-Imaging Stationary Compound Parabolic Concentrator using Ray Tracing Technique. [Final Year Project]

Lee, Jia Rong (2018) Monitoring Sea Level Rise in Malaysia Using Geospatial Technology. [Final Year Project] (Submitted)

Lim, Boon Chin (2018) Extraction of Biopolymer and Its Application in Agriculture Wastewater. [Final Year Project] (Submitted)

Lim, Xiu Yi (2018) EFFECTS OF PILE-SOIL INTERACTION ON THE STRUCTURAL INTEGRITY OF OFFSHORE JACKET PLATFORM. [Final Year Project] (Submitted)

Loo, Kah Hou (2018) Wave Transmission Past A Submerged Semicircular Breakwater: A Numerical Approach. [Final Year Project] (Submitted)

Lim, Way Yeow (2018) Study on Flood Accidents at Kampung Padang Serai, Perak. A Lattice Boltzmann Approach. [Final Year Project] (Submitted)

M

MUSA, FAIZ SYAUQI (2018) EMBEDDED PRESENTER TRACKING SYSTEM. [Final Year Project]

Mohd Khairuddin, Muhammad Amirul Izzwan (2018) Effect of Single Corroded Defect Geometry on the Burst Capacity of Grooved Corroded Pipeline Subjected to Internal Pressure. [Final Year Project] (Submitted)

Mazelan, Fahim Nabil (2018) Multi-Input Power Converter for Renewable Energy System using Active Current Sharing Scheme. [Final Year Project]

MOHD ADZMI, MOHD DANIAL AIMAN (2018) SENSORY EXPERT: DEVICE FOR SENSORY TEST. [Final Year Project]

MAKTAR, AHMAD AMINUDDIN (2018) POLYGON SHAPE DATA COLLECTION SYSTEM. [Final Year Project]

Mutharpavalar, Ashaashvini (2018) Measuring Traffic Flow using Video Cameras. [Final Year Project]

Mohamad, Nurhusna Millah (2018) Study on Solar PV Power Output during Grid Voltage Dip/Swell. [Final Year Project]

MOHAMMED BA’ASHEN, HUSSEIN (2018) ANALYSIS OF HEARTBEAT ANOMALIES FROM DIGITAL STETHOSCOPE AUDIO. [Final Year Project]

MOHAMED MOHSIN, HUSSEIN (2018) IMPLEMENTATION OF ROBOT NAVIGATION USING CAMERA BY IDENTIFYING SIGNAGE. [Final Year Project]

Musa, Huwaida (2018) “Analysis of EEG Recordings During Grasp and Lift (GAL) Trials. [Final Year Project]

MOHD DZUKERI, MOHAMAD IRFAN (2018) PERFORMANCE ANALYSIS OF SOLAR POWER PLANT IN GEBENG. [Final Year Project]

MOHD YUSOFF, MUHAMMAD AIZAT (2018) MINIATURE SURFACE TRACING DEVICE FOR SURGICAL GUIDANCE AND NAVIGATION. [Final Year Project]

Mohd, Murni Athirah (2018) Classification of Healthy Condition and Depression using functional Near Infrared Spectroscopy (fNIRS). [Final Year Project]

Mazlan, Nurul Shafika (2018) Development of Piezoelectric-Based Energy Harvesting Device for Smart City Applications. [Final Year Project]

MATHE, REINALDO PEDRO (2018) ADVANCED BIO-SENSING SYSTEM FOR THERMAL AMBIENCE COMFORT. [Final Year Project]

MOHAN RAO, ROSHAN (2018) INVESTIGATION OF MINDFUL EMOTION REGULATION. [Final Year Project]

MAHAMAD IBRAHIM, MAHAMAD RIZWAN (2018) STUDY ON THE MORPHOLOGY OF LATEX MODIFIED BITUMEN. [Final Year Project] (Submitted)

MD NADZIR, MUHAMMAD FAISAL (2018) DEVELOPMENT OF CORRUGATED SHELL STRUCTURE AND STUDY OF ITS EFFECT ON THERMOSET COMPOSITE SHEET. [Final Year Project] (Submitted)

MOHD NOOR, SITI NURSYUKRIAH (2018) CHARACTERIZATION OF NANOCERAMIC COATING PROPERTIES. [Final Year Project] (Submitted)

Mohamed Zuhri, Ahmad Syazni Afham (2018) KUKA ROBOT LANGUAGE: MOTION CONTROL OF KUKA ROBOT. [Final Year Project] (Submitted)

Marzuki, Mohd Hakimi (2018) Dewaxing of Oil Pipelines by Applied Magnetic Field. [Final Year Project] (Submitted)

Mohd Rizal, Fatin Nur Jeehan Rizal (2018) ENHANCEMENT OF OVEN-VACUUM BAGGING PROCESS FOR MANUFACTURING SANDWICH PANELS. [Final Year Project] (Submitted)

Mustafa Kamal, Amar Safwan (2018) Influence of Rice Husk Ash Particles on Microstructure and Mechanical Properties of AA7075-T6 Aluminium Matrix Composites Produced using Friction Stir Processing. [Final Year Project] (Submitted)

Muhammad Amin, Mirza Muqri (2018) Effect of Various Fillers on Intumescent Fire Retardant Coating and Their Influence on Fire Resistance. [Final Year Project] (Submitted)

Medhi, Nur Syafiqah (2018) Numerical Investigation of Electronic Cooling with Phase Change Material. [Final Year Project] (Submitted)

MOHAMAD SAUPEE, NURUL SYAZWANEE (2018) NUMERICAL SIMULATION STUDY LAMINAR MIXED CONVECTION NANOFLUIDS FLOW FORWARD-FACING STEP PLACED WITH BAFFLE. [Final Year Project] (Submitted)

Mohd Badzli Shah, Mohamad Hafidz (2018) Design and Performance Improvement of Pico Hydro Turbine. [Final Year Project] (Submitted)

MD ROSLAN, FARAH FARHANA (2018) DEVELOPMENT OF SOLAR ENERGY HARVESTER FOR INTERNET OF THINGS. [Final Year Project]

MOHAMMED AL-AMERI, MOHAMMED AMMAR (2018) DISPLACEMENT MEASUREMENT AND TRACKING USING LASER RANGE FINDER. [Final Year Project]

Mohamad Sobri, Mohamad Aiman Saufi (2018) Smart Pill Wallet. [Final Year Project]

Mohd Zain, Muhammad Afiq (2018) FEASIBILITY STUDY FOR SOLAR POWER PLANT IMPLEMENTATION IN UTP. [Final Year Project] (Submitted)

MOHAMMAD RADZI, MOHAMMAD SHAHME RIZAL (2018) THE ESSENTIAL FACTORS OF PROFESSIONAL COMPETENCIES IN IMPLEMENTING SUSTAINABLE CONSTRUCTION. [Final Year Project] (Submitted)

Mohamad Khalil, Nor Amirah Syamimi (2018) Multibody Approach to Dynamical System: The case of Bottom Fixed Offshore Wind Turbine. [Final Year Project] (Submitted)

MOHAMMAD , SYAFIQ AZYAN (2018) INVESTIGATION ON DRAG REDUCTION OF UNDERWATER GLIDER BY MANIPULATING THE ANGLE OG HEADING. [Final Year Project]

MOHD DAUD, MOHAMMAD SYAHMIE (2018) COMPUTATIONAL FLUID DYNAMICS (CFD) INVESTIGATION ON THERMAL PERFOMANCE OF HEAT SINKS IN ELECTRONIC EQUIPMENT. [Final Year Project]

MOHD AMIR NOR RABI, MOHD AMIRUL AFIQ (2018) INVESTIGATION OF DIAMOND LIKE CARBON COATING FOR FRICTION STIR WELDING TOOL. [Final Year Project]

Mohd Asri, Amir Syafiq (2018) Simulation and Analysis of Welding Distortion of T- Joint Using Ansys”. [Final Year Project]

Mat Daud, Ahmad Taqiyuddin (2018) Analysis of a Free Piston Linear Generation System. [Final Year Project]

Mohamed Razak, Mohd Hairie Azam (2018) Flow Simulation Study For Rotating Cage Equipment. [Final Year Project]

Mohd Husni, Muhammad Amir Azri (2018) EFFECT OF MECHANICAL PROPERTIES ON SURFACE TREATMENT TO CARBON FIBER WOUND HDPE COMPOSITE PIPE (CFWHCP). [Final Year Project]

MOHD JAMIL, HASIFI HAZIM (2018) EVALUATION OF COATING PERFORMANCE FOR OFFSHORE STRUCTURES IN A HARSH ENVIRONMENT. [Final Year Project]

Mohamad Azalan, Nur Haaziq (2018) DESIGN AND DEVELOPMENT OF AN OPTICAL GONIOMETER. [Final Year Project]

MOHAMAD NASRI, MOHAMAD NAAIM (2018) EFFECT OF SAND CONTAMINANT IN CRUDE OIL PIPELINE. [Final Year Project]

MOHD YAZIT, LUKMAN NULHAKIM (2018) HOLE ANALYSIS OF CARBON FIBER REINFORCED POLYMER (CFRP) LAMINATES STACK DRILLING IN AN AIRCRAFT APPLICATION. [Final Year Project]

Madhavan, Prasad (2018) Investigation of the Performance of Thermal Energy Storage (TES) with Embedded Phase Change Materials (PCM). [Final Year Project]

MOHD AZLAN, MOHAMAD NAZRIN SHAH (2018) RESIDUAL STRENGTH ANALYSIS OF SINGLE CIRCUMFERENTIAL CORROSION GROOVE SUBJECTED TO INTERNAL PRESSURE AND LONGITUDINAL COMPRESSIVE STRESS. [Final Year Project] (Submitted)

Muniandy, Divyeruthra (2018) AUTOMATED PIPELINE DIAGNOSTICS USING IMAGE PROCESSING AND INTELLIGENT SYSTEM. [Final Year Project]

Mohamed Eltayib, Muhanad Elshafie (2018) ENHANCING EFFICIENCY OF IRRIGATION SYSTEMS THROUGH COMBINATION OF IRRIGATION METHODS. [Final Year Project] (Submitted)

MOHD SAID, SYAZMEER ARRAFI (2018) DETERMINING THE ACCURACY OF GLOBELAND30 LAND COVER MAP USING COMPARATIVE ANALYSIS WITH ERROR MATRIX, UNBIASED AREA ESTIMATION AND GROUND TRUTHING: A CASE STUDY OF MALAYSIA’S NORTHERN HEMISPHERE. [Final Year Project] (Submitted)

MOHD HELMI, NUR HAZWANI (2018) Rheological Properties of Bitumen Containing Organic Foaming Agent for Warm Mix Asphalt. [Final Year Project] (Submitted)

Mohd Zin @ Nordin, Muhamad Adam (2018) MECHANICAL AND PHYSICAL PROPERTIES OF FLY ASH-GGBFS GEOPOLYMER MORTAR FOR IN-SITU APPLICATION. [Final Year Project] (Submitted)

Mohamad Sani, Muhammad Afiq (2018) Compression Behaviour of Marine Clay in the East Coast of Peninsular Malaysia. [Final Year Project] (Submitted)

Mohamad Isa Zohri, Meor Abdul Azziim (2018) Impact of Transverse Reinforcement Ratio on Flexural Behaviour of Self Compact High Strength Concrete (SCHSC) Beams. [Final Year Project] (Submitted)

MUSTAFA, MUHAMMAD IZZATT (2018) EVALUATING THE ACCURACY OF GLOBELAND30 LAND COVER MAP USING AN ENSEMBLE TECHNIQUE: A CASE STUDY OF MALAYSIA’S SOUTHERN HEMISPHERE. [Final Year Project] (Submitted)

Muhametniyazov, Sahet (2018) SCALING RATIO EFFECTS ON THE PREDICTION OF TRUSS SPAR DYNAMIC MOTIONS. [Final Year Project] (Submitted)

N

NOR AFFIZAL, AMIRAH (2018) DEVELOPMENT OF GRAPHENE-BASED VOLATILE ORGANIC COMPOUND (VOCs) SENSOR. [Final Year Project]

Necholas, Calvin Kynsesky Entri (2018) Development of Animal Detection System for Traffical Collision Avoidance. [Final Year Project]

Naraynan, Visnuruban (2018) Environment Mapping Using Infra-Red Sensor Data and Probability Rules. [Final Year Project]

Noorazli, Nur Aina (2018) Topology Optimization Analysis and Development of a Bracket Using Simulation and Additive Manufacturing (AM) Technology. [Final Year Project] (Submitted)

NORIDAN, NOR AMEYZAH (2018) OPTIMIZATION OF AGING PROCESS ON CLOSED-CELL ALUMINIUM FOAM USING BOX BEHNKEN DESIGN. [Final Year Project] (Submitted)

NIK AHMAD FAIZUL, NIK SYAFINAZ SOFIA (2018) Characterization and modelling for copper cable attenuation and crosstalk up to 100MHz (High speed data bandwidth in copper cables). [Final Year Project]

Nanyan, Muhammad Nadhir (2018) Model Predictive Control of a pH neutralization Process. [Final Year Project] (Submitted)

NIK ABDUL AZIZ, NIK AMIRUDDIN (2018) NUMERICAL INVESTIGATION ON THE PERFORMANCE OF THE PHOTO-THERMOELECTRIC AIR DUCT FOR BUILDINGS NIK. [Final Year Project]

Noor Azman, Muhammad Aiman Faris (2018) Prediction of Evaporator Performance of Double Effect Steam Absorption Chiller. [Final Year Project]

Nawawi, Muhammad Farhan (2018) Finite Element Analysis of Rock-Cutter Interaction in Drilling Operation using Single Cutter PDC Bit. [Final Year Project]

Nazmi, Nur Hidayah (2018) The Application of GeographicalInformation System (GIS) in Project Management to MonitorConstruction Site Progress and Scheduling. [Final Year Project] (Submitted)

NG, ASHLEY LIN XIAN (2018) QUANTITATIVE TWO-PARAMETER POWER MODELLING OF POLLUTANTS IN STORMWATER. [Final Year Project] (Submitted)

Ng, Ka-Wy (2018) Computational Study on Perak River at Teluk Intan, Perak, Malaysia. A Lattice Boltzmann Approach. [Final Year Project] (Submitted)

O

ONG, ZI CONG (2018) MODELLING AND ANALYSIS OF POWERTRAIN PERFORMANCE OF A SINGLE-SEATED RACE CAR. [Final Year Project]

Omar, Noraimi (2018) Antifriction Bearing Malfunction Detection and Diagnostics using Hybrid Approach. [Final Year Project]

OTHMAN, MUHAMMAD FAISAL (2018) GREY RELATIONAL ANALYSIS FOR PRIORITIZING INSPECTION OF PIPING SYSTEM SUBJECT TO CORROSION UNDER INSULATION. [Final Year Project]

Omar, Muhammad Ikmal (2018) Corrosion of Copper-coupled Steel in Open Recirculating Cooling Water System. [Final Year Project] (Submitted)

Omar, Noraimi (2018) Antifriction Bearing Malfunction Detection and Diagnostics using Hybrid Approach. [Final Year Project] (Submitted)

P

PAUL DANIEL, JOEL JACOB (2018) FEASIBILITY STUDY OF SOLAR CARPARK IN UTP. [Final Year Project]

Parameswaran, Kishok Kumaar (2018) Design of Coaxial Resonator Bandpass Filter. [Final Year Project]

Phon, Thamiet Saukeaw (2018) Distributed Video Tracking. [Final Year Project]

Pyae, Phyo Pain (2018) Strengthening of Self Compact High Strength Concrete Beams with CFRP Wrapping. [Final Year Project] (Submitted)

Pian, Raffaella Cheau Mei (2018) Mechanical Properties and Performance Evaluation of Polypropylene/Betel Nut Husk Composite. [Final Year Project]

Poh, Bee Yee (2018) Design Optimization of a Rapidly Installed Floating Breakwater for Wave Protection of the Offshore Facilities. [Final Year Project] (Submitted)

Q

QIAN XIN, SOONG (2018) ANALYSIS OF BIOSENSOR PHYSIOLOGICAL SIGNALS FOR ASSESSMENT OF NEUROLOGICAL STATUS. [Final Year Project]

R

Roslin, Nik Muhammad Ariz (2018) Development of Vehicle Detection Technique Using Sliding Window Tracking. [Final Year Project]

Rahamathulla, Haris Sidiq (2018) SMART FAN FOR ENERGY CONSUMPTION MANAGEMENT. [Final Year Project]

Rajendran, Vishandh (2018) Total Ionizing Dose and Single Event Effect Radiation effects in SiC SCT10N120 Power MOSFET. [Final Year Project]

Ramlee, Ezwani (2018) Enhancing the Lifetime and Corrosion Resistance of Gear Made of Carbon Steel. [Final Year Project] (Submitted)

Rosley, Luqman Nur Hakim (2018) Performance Analysis of Castable FDM Filaments for Rapid Casting Applications. [Final Year Project] (Submitted)

Ruzaima, Khairul Azroy (2018) Mangrove Health Monitoring System. [Final Year Project] (Submitted)

Rosnan, Muhammad Fahmi (2018) HAPTIC DEVICE FOR VIRTUAL HEALTH APPLICATIONS. [Final Year Project]

Ragunathan, Ranjeeta (2018) Modelling of Indoor Lighting Energy Harvesting System for IoT. [Final Year Project] (Submitted)

Rudy, Mohd Taufik (2018) NUMERICAL ANALYSIS OF BLAST RESISTANT STRUCTURE IN OIL AND GAS PLANT. [Final Year Project] (Submitted)

Rahim, Nurul Izzati (2018) Structural Behaviour of Reinforced Concrete (RC) Deep Beam with Web Opening Strengthened using Carbon Fibre Reinforced Polymer (CFRP). [Final Year Project] (Submitted)

Rumaizi, Shahril Ikhwan (2018) Effect of Initial Surface Finishing Roughness on Corrosion Behaviour of AISI 1050 Carbon Steel in CO2 Environment. [Final Year Project]

RAHMAD, MUHAMMAD AIMAN HAKIM (2018) The Influence of Zinc Oxide Nano Particle on the Adhesion and Abrasion Properties of Graphene Oxide/Epoxy Composite System for Pipeline Application. [Final Year Project]

RIDZUAN, ANAS FADHIL (2018) FATIGUE ANALYSIS OF FREE STANDING DRILLING RISER DUE TO VORTEX INDUCED VIBRATION UNDER EXTREME WEATHER CONDITIONS. [Final Year Project] (Submitted)

RAM NAIR, SAYSHAR (2018) COMPUTATIONAL FLUID DYNAMICS INVESTIGATION ON THE USE OF PHASE CHANGE MATERIAL (PCM) HEAT EXCHANGER TO PROVIDE COOLING FOR BUILDING THERMAL COMFORT. [Final Year Project]

Rein Myo, Thu (2018) Control of Rotary Drill Bit to Reduce Vibration Using Input Shaper. [Final Year Project]

Ramdan, Nur Farzana (2018) The Use of Public Transport Considering Time-Use and Activity Participation, Personal Characteristics and Built Environment. [Final Year Project] (Submitted)

Rozymov, Yhlas (2018) Evaluation of the Hydrodynamic Responses of FPSO in Extreme Shallow Water. [Final Year Project] (Submitted)

S

Saipolyazan, Amir Hakim (2018) VOLTAGE AND FREQUENCY BASED ISLANDING DETECTION FOR GRID CONNECTED SOLAR PV SYSTEM. [Final Year Project]

SAWALUDIN, KAMARUL AMIN (2018) Virtual Therapy Environment For Rehabilitation Of Motor Disabilities. [Final Year Project]

Shahrin, Muhammad Fahmi (2018) Development of Electrical Capacitance Tomography for Two Phase Characterization. [Final Year Project]

SANDHU, SANJEET SINGH (2018) IMAGING SYSTEM FOR PAPER MICROFLUIDS. [Final Year Project]

Sennjiv , Allagu (2018) Analysis of Fixed Cutter Bit for Directional Drilling in Hard Formation. [Final Year Project] (Submitted)

SYED KHAIZURA, SYED HUSEIN KAMIL (2018) IMPLEMENTATION OF GRAPH BASED PATH PLANNING ALGORITHMS FOR INDOOR NAVIGATION. [Final Year Project]

Shahrul Aman, Syafiqah (2018) STRUCTURAL BEHAVIOUR OF REINFORCED CONCRETE (RC) SLABS WITH OPENING STRENGTHENED USING CARBON FIBRE REINFORCED POLYMER (CFRP). [Final Year Project] (Submitted)

Shia, Hui Lu (2018) Critical Success Factors of Collaborative Approach in Delivering Sustainable Construction. [Final Year Project] (Submitted)

Suppiah, Naavin (2018) Residual Strength Analysis of Diagonally Aligned Interacting Corrosion Defects Subjected to Internal Pressure and Longitudinal Compressive Stress. [Final Year Project]

Supparmaniam, Veenoshini (2018) Strength Analysis of Basalt Epoxy Composite Laminates with Multiple Open Holes. [Final Year Project]

SIVBALATHAVAN, YHAGUNAN (2018) EFFECT OF. [Final Year Project]

SHUKRI, FADHIL AIZAD (2018) CFD STUDY ON EFFECTS OF DIFFERENT WINDOW FILMS ON THE COOLING RATE OF ACADEMIC BUILDINGS IN UNIVERSITY TECHNOLOGY PETRONAS (UTP). [Final Year Project] (Submitted)

SHU LIANG, HO (2018) Performance Analysis of 150cc Single Cylinder Engine with Electronic Fuel Injection System. [Final Year Project] (Submitted)

Shanmugam, Kashinath (2018) A Study of Physical and Mechanical Properties of Powder Injection Molded Copper-Tungsten Alloys. [Final Year Project]

Sambas, Nurul Faradila (2018) Rainwater Harvesting with First Flush: Water Quality Analysis for Non-Potable Purpose. [Final Year Project] (Submitted)

T

Teh, Christopher Jun Qian (2018) Power Saving for Extending Lifetime of IoT Application. [Final Year Project]

TAN, CHIN ZHI (2018) CFD MODELING ON STABILITY OF LIQUID CARBON DIOXIDE IN DEEP OCEAN. [Final Year Project] (Submitted)

Tengku Bazli, Tengku Muhamad Nazmi (2018) Experimental Analyses on T-junction Geometry in Two Phase Flow. [Final Year Project] (Submitted)

TG. ALI, TENGKU MOHAMAD AMIRUL (2018) Effect of Nitriding Temperature and Nitriding Time On Magnesium, MgAZ91D Alloy. [Final Year Project] (Submitted)

THANKARAJ, THEEVASHINI (2018) CHARACTERISTIC OF ROCK SLOPE DETERIORATION. [Final Year Project] (Submitted)

U

Ue Wei, Tan (2018) Study Of Behaviour-based Navigation for Indoor Mobile Robot. [Final Year Project]

V

VICTOR GORGE, KENNIE RAJ (2018) DEVELOPMENT OF DISCRETE EVENT MODEL FOR CONTINOUS MANUFACTURING PROCESS OF ETHANOLAMINES. [Final Year Project] (Submitted)

VOO, ANDREW TEE YUNG (2018) NUMERICAL STUDY OF NON-LINEAR WAVE KINEMATICS BENEATH EXTREME WAVES. [Final Year Project] (Submitted)

W

WONG, SAMUEL WENG FAI (2018) Performance Evaluation of a 2-kWp Grid Connected Photovoltaic System in Gate 3 Universiti Teknologi PETRONAS. [Final Year Project]

Wan Hussain, Wan Hanafi (2018) Structure Simulation & Modelling Using HFSS. [Final Year Project]

WONG, CHEE YUEN (2018) DESIGNING A MICROWAVE OSCILLATOR. [Final Year Project]

WONG , HAO XIANG (2018) INVESTIGATION ON THE EFFECT OF ROLL MOTION ON MANEUVERABILITY OF UNDERWATER GLIDER USING WATER BLADDERS. [Final Year Project] (Submitted)

Wan Mohd Nasir, Wan Mohamad Hafiz (2018) Cathodic Disbondment of Nano Ceramic Coating. [Final Year Project] (Submitted)

Wan Alim, Wan Muhamad Izzat (2018) A Study of Corrosion Inhibitor Performance on Coating Pinhole Defects. [Final Year Project]

Wahid, Abdul Hakim (2018) Leak Detection in Liquid Pipeline using Flow Monitoring Method. [Final Year Project] (Submitted)

Wan Azaha, Wan Nor Suhaina (2018) Effect of Nitriding Temperature and Time with Gas Mixture of 95% Nitrogen and 5% Hydrogen on MgAZ91D Alloy. [Final Year Project] (Submitted)

WONG, WOON KEONG (2018) MONITORING OF RIVER WATER QUALITY AND MIRCO-POLLUTANT FOR PINJIR RIVER, PERAK. [Final Year Project] (Submitted)

Wong, Charlie Chiong Ho (2018) High Crane Stability Monitoring in High Rise Building Construction. [Final Year Project] (Submitted)

Y

YEW SHUN, OOI (2018) HIGH DENSITY DEEP LEARNING-LITE WITH INTEL OPENVINO™. [Final Year Project]

YAHYA, MUHAMMAD IKHWAN (2018) BURST CAPACITY ANALYSIS OF MULTIPLE CIRCUMFERENTIALLY INTERACTING CORROSION DEFECTS SUBJECTED TO INTERNAL PRESSURE AND LONGITUDINAL COMPRESSIVE STRESS. [Final Year Project] (Submitted)

YII, HEE LING (2018) Development of Framework for Proper Selection of Root Cause Analysis (RCA) Tools for Incidents in Oil and Gas Industry. [Final Year Project] (Submitted)

Yew, Weng Keong (2018) Nonlinear Transient Finite Element Analysis of Dog Bone Specimen. [Final Year Project] (Submitted)

Yeoh, Jun Jie (2018) Effects of Different Slope Construction Methods on the Behaviour of Soil Using Finite Element Method (FEM). [Final Year Project] (Submitted)

Yeoh , Jun Jie (2018) Effects of Different Slope Construction Methods on the Behaviour of Soil Using Finite Element Method (FEM). [Final Year Project] (Submitted)

You , Jin Wei (2018) Study on Headwater Accidents at Lata Kinjang Waterfall, Perak. A Lattice Boltzmann Approach. [Final Year Project] (Submitted)

Yusup, Nasrullah (2018) Characteristics Study and Development of Solid Fuel Briquette From Sarawak Coal. [Final Year Project]

YAR, MUHAMMAD ASFAND (2018) Assessing the Impact of Failure Factor In Term of Preventive Maintenance Planning Adopting Witness Simulation Software. [Final Year Project] (Submitted)

Z

ZAKARIYA@ZAKARIA, NOOR FADIAHANIM (2018) A SELF-POWERED BLUETOOTH NETWORK FOR INTELLIGENT TRAFFIC LIGHT JUNCTION MANAGEMENT. [Final Year Project]

Zulailee, Zaiful Hisham (2018) STEREO IMAGE PROCESSING FOR DISTANCE AND SIZE MEASUREMENT. [Final Year Project]

Zainul Asri, Muhammad Amir Syafiq (2018) Risk Analysis for Piping Systems Subject to Vibration Using Delphi Method. [Final Year Project]

Zainal, Mohd Hafiz (2018) Compatibility Study and Corrosion Behaviour of Storage Materials in Different Blends of Palm Methyl Ester Biodiesel. [Final Year Project]

ZINN LYNN, THAW (2018) EXPERIMENTAL INVESTIGATION ON EFFECT OF AG-WATER NANOFLUID ON THE THERMAL PERFORMANCE OF HEAT PIPE. [Final Year Project]

ZAINUDIN, SITI AQILAH (2018) Deterioration Model of Soil Slopes. [Final Year Project] (Submitted)