UTPediaBrowse by Type
![[up]](/style/images/multi_up.png)
Up a levelFinal Year Project
Nawawi, Mohammad Aidil (2016) APPLICATION OF SEISMIC INVERSIONS AND SPECTRAL DECOMPOSITION OF KTN FIELD, TAIWAN. [Final Year Project]
Ahmad Yahya, Aqilah (2016) Assessment of stratigraphic and structural relationships of Devonian-Carboniferous successions in Kanthan area, northern part of the Kinta Valley, Peninsular Malaysia. [Final Year Project]
Haron, Hasrizal (2016) Integrated Matrix of 5S and Autonomous Maintenance for the Processing Industry. [Final Year Project] (Submitted)
Adam, Mohd Farid (2016) Numerical and Simulation Analysis of PDC cutter Associated with the Rate of Penetration. [Final Year Project] (Submitted)
Nik Ahmad Ridzlan, Nik Aiemen Razieq (2016) Pipeline modelling for leak detection using pressure gradient method. [Final Year Project] (Submitted)
Aman Zaharil, Muhammad Hafiz Osman (2016) Experimental Modeling and Evaluation of Solar Cooker For Malaysia Potential. [Final Year Project] (Submitted)
Zul Azri, Azril Danial (2016) Simulation Study Effect of Fine Particle on Choke Valve by Using Computational Fluid Dynamic (CFD). [Final Year Project] (Submitted)
Wan Johari, Wan Muazzam (2016) Gasification of Waste Leaf Pallets in a Downdraft Gasifier for Off-grid Power Generation. [Final Year Project] (Submitted)
Khalid, Muhamad Fazillah (2016) Iridium Oxide pH Microsensor Based on Stainless Steel Wire for pH Mapping on Metal Surface. [Final Year Project]
., Muhammad Izwan Bin Hazim (2016) Investigation of Open Source Optimizers for Mechanical Design Optimization Problems. [Final Year Project]
Mazlan, Mohamad Mizal Saiful Anuar (2016) Process Parameters Optimization of High Density Polyethylene (HDPE) Friction Stir Welded Plates. [Final Year Project]
., Muhamad Fadhli Bin Rosli (2016) Mechanical Properties and Microstructural Evaluation of Dissimilar Friction Stir Weld of AA6061 Aluminium Alloy and AA5083 Aluminium Alloy. [Final Year Project]
Yusni, Alif Aiman (2016) Heat Transfer Study of Helically Coiled Tube Heat Exchanger. [Final Year Project]
@Sinawat, Clement Welley (2016) Investigation On the Physical, Mechanical and Corrosion Behaviour of 316L Austenitic Stainless Steel Nitriding at Elevated Temperature. [Final Year Project] (Submitted)
Mhd Nasser, Asma‘ Khairunnisa‘ (2016) Development of Excel-Based Piping Vibration Assessment Model. [Final Year Project] (Submitted)
Ramli, Muhammad Nurshafiq (2016) Analyze Performance of Torque Boosting Device. [Final Year Project] (Submitted)
Mohd Nazree, Muhammad Azlan Nasrin (2016) Reducing Re-Absorption Losses In Luminescent Solar Concentrators ( LSC’s) By Using Nanomaterials. [Final Year Project] (Submitted)
Abdul Rahim, Mohamad Syazwan (2016) Structural Analysis of Rotating Baffles in a CO2 Separator. [Final Year Project] (Submitted)
Md Arif, Muhammad Nafiz Izzat (2016) Investigation Of The Critical Features Affecting The Condition Of Oil And Gas Pipeline. [Final Year Project] (Submitted)
AMIRUL LUTHFI CHAN, HAZIQ LUTHFI (2016) Experimental Study on the Impact of Wet Sand Particle to the Erosion of Mild Steel Plate. [Final Year Project] (Submitted)
Che Suliman, Muhammad Syahmie (2016) RESIDUAL STRENGTH ANALYSIS OF CORRODED PIPELINE WITH INTERACTING DEFECTS SUBJECTED TO INTERNAL PRESSURE AND LONGITUDINAL COMPRESSIVE STRESS. [Final Year Project] (Submitted)
Haji Rosihan, Siti Salmiah (2016) Corrosion Study on X65 Steel with Wax Deposition under Thermal Effect. [Final Year Project] (Submitted)
MOHMAD @ FIKRI, FAEZ (2016) INVESTIGATION OF TITANIUM ADDITION ON PHYSICAL AND MECHANICAL PROPERTIES OF POWDER INJECTION MOLDED 316L STAINLESS STEEL PARTS. [Final Year Project] (Submitted)
JAMAL, IZZAT AMIR ZAFRI (2016) PERFORMANCE OF FREE-PISTON LINEAR GENERATOR BY USING COMPRESSED AIR. [Final Year Project] (Submitted)
Sahardin, Abdul Malek (2016) Fabrication of Iridium Oxide Screen Printed pH Sensor for Microbial Induced Corrosion Monitoring Application. [Final Year Project] (Submitted)
Mohd Arshad, Mohamad Hazrul Azli (2016) The Study of the Effects of Drilled Hole on Tensile Strength of Hybrid Fiber Reinforced Epoxy (HFRE) Composite. [Final Year Project] (Submitted)
A Rahim, Nurkamariah (2016) AN INVESTIGATION OF MECHANICAL PROPERTIES ON NITRIDED AUSTENITIC STAINLESS STEEL. [Final Year Project] (Submitted)
Yahaya, Mohd Afzal Syahin (2016) Mechanical Properties and Corrosion Resistance of Nitrided Austenitic Stainless Steel (ASS) 316L at Low Temperature. [Final Year Project] (Submitted)
NIK MAHAMED, NIK SAHIRA NAJIHA (2016) Development of Solid Fuel Briquette from Coal Waste. [Final Year Project] (Submitted)
Ruslan, Ibtihal (2016) Parametric Study on Effectiveness of Heat Exchangers for Primary and Secondary Chilled Water Distribution Lines of an Academic Complex. [Final Year Project] (Submitted)
Mohamad Lutfi, Mohamad Ashraf (2016) Effects of Ball Milling Time on the Fire Performance Red Mud Intumescent Coating. [Final Year Project] (Submitted)
Ab Hadi, Muhamad Naqiuddin (2016) Cellular Core Sandwich Structures for Offshore Construction. [Final Year Project] (Submitted)
Shiun, Onn Wei (2016) INVESTIGATING THE OPTICAL LOSSES OF A SECOND REFLECTOR IN A BEAM DOWN POWER TOWER. [Final Year Project] (Submitted)
Yang, Chong Yew (2016) Texture Surface Analysis of Hydrodynamic Journal Bearing. [Final Year Project] (Submitted)
Hussein Shah, Mohamad Izzudin (2016) Study of Micro-Explosion Phenomena of Various Water-in-Biodiesel Emulsion (WiBE) Using Visualization Technique. [Final Year Project] (Submitted)
Mohammad Rafi, Mohammad Syafiq (2016) Aerodynamic Analysis on Small Race Car Body by using CFD Simulation. [Final Year Project] (Submitted)
Idris, Muhammad Khairi (2016) Effect of Sensor-Actuator Non-collocation to Dynamic Response of Flywheel Energy Storage System Supported by Active Magnetic Bearing. [Final Year Project] (Submitted)
Abdul Wali, Muhamad Ammar (2016) Study of Force Feedback in Steer-By-Wire Vehicles for Driving Simulator. [Final Year Project] (Submitted)
Abd Rashid, Muhamad Naim (2016) Wear Resistance Study of Nitrided ASS 316L Above The Sensitization Temperature of 1200oC. [Final Year Project] (Submitted)
JAMALUDDIN, FATIN NABILA (2016) CORRELATION ANALYSIS BETWEEN CHILLED WATER AND ELECTRICAL POWER DEMAND BASED ON GAS DISTRICT COOLING PLANT OPERATIONS. [Final Year Project] (Submitted)
Aminuddin, Ikhwan Syamim (2016) Investigation of Mechanical properties of Nitrided Weldments of Austenitic Stainless Steel After Quenching. [Final Year Project] (Submitted)
Ali, Zain (2016) INVESTIGATION OF CONJUGATE HEAT TRANSFER OF A ROTATING LATENT HEAT ENERGY STORAGE. [Final Year Project] (Submitted)
Amat, Arif Danial (2016) Cold-Flow CFD Analysis of Intake-Compression process for Hydrogen-Fuelled Internal Combustion Engine. [Final Year Project] (Submitted)
Mohd Eilham, Mohamad Anis (2016) Study on Low Boost Pressure Effect of Electric Turbocharger on Engine Performance. [Final Year Project] (Submitted)
Adnan, Adni Hashira (2016) Evaluation of Carbon Dioxide Emission of Plate Heat Exchanger for Chilled Water Distribution. [Final Year Project] (Submitted)
Mohd Thulus, Shahmirul Azri (2016) Green Fuel: Improvement of Engine Performance using Water-in-Diesel Emulsion (WiDE) with a Small Percentage of Hydrogen. [Final Year Project] (Submitted)
Ibrahim, Maziah (2016) A Study Of Shock Absorption Performance Of Tapioca Starch As Cushioning Material For Packaging. [Final Year Project] (Submitted)
ISMAIL, MOHAMED HAKAM HUSAIRI (2016) RESIDUAL STRENGTH ANALYSIS OF CORRODED PIPELINE WITH SINGLE DEFECT SUBJECTED TO INTERNAL PRESSURE AND LONGITUDINAL COMPRESSIVE STRESS. [Final Year Project] (Submitted)
Zulkafli, Muhammad Harith (2016) Investigation of Nanofluids Selection for Solar Thermal Collectors. [Final Year Project] (Submitted)
a/l Asokan, Arravinthan (2016) Mechanical Properties and Performance Evaluation of Polypropylene (PP)/Lalang Grass Composite. [Final Year Project] (Submitted)
Che Engku Chik, Che Engku Mohd Khairi (2016) Towards Zero - Energy Commercial Offices by Utilizing Phase-Change Energy Storage Heat Exchanger to Replace Conventional Air Conditioning System. [Final Year Project] (Submitted)
SAIPUDDIN, NURAMALINA (2016) PERFORMANCE ASSESSMENT OF AN OFF DESIGN AIR FINNED COOLER. [Final Year Project] (Submitted)
ABD MOKTI, NOORAKBAR (2016) Wear Analysis of Tungsten Carbide Coated with Diamond-Like Carbon as Friction Stir Welding Tool. [Final Year Project] (Submitted)
Abdul Malek, Wan Nuradila (2016) Mechanical Properties of Recycled HDPE-Areca Leaf Sheath Fiber Composite. [Final Year Project] (Submitted)
NORDIN, AFIF AIMAN (2016) Comparative Study on Red Mud Modified Intumescent Coating. [Final Year Project] (Submitted)
Ab. Kadir, Nuraqliah (2016) SIMULATION STUDY ON SMART SPRINKLER FOR UNIFORMITY IMPROVEMENT. [Final Year Project] (Submitted)
Ismail, Siti Syahirah (2016) Investigation of Performance On Low and High Temperature Nitrided 316L Austenitic Stainless Steel On Impact Test and Scratch Test. [Final Year Project] (Submitted)
., Koh Kelly (2016) Experimental Evaluation of Innovated Mixed Flow Wind Turbine for Updraft Solar Power Generation Systems. [Final Year Project]
Azizuddin, Aliah Azlin (2016) DEVELOPMENT OF THERMAL INSULATION BY UTILIZNG EMPTY FRUIT BUNCH (EFB). [Final Year Project]
Muhamad, Muhamad Fikri (2016) EFFECTS OF DRILLING GENERATED HEAT ON DELAMINATION IN GLASS FIBER REINFORCED EPOXY (GFRE) COMPOSITES. [Final Year Project]
Ismail, Mohd Fareid Fareez (2016) Study of Automatic Balancing for Flywheel-based Kinetic Energy Recovery System (KERS). [Final Year Project]
Roslan, Rabiatul Adawieah (2016) TORREFACTION OF EMPTY FRUIT BUNCH IN BIOMASS COMBUSTION GAS. [Final Year Project]
Mohd Rodzhan, Nur Syahirah (2016) Evaluation of Epoxy-Based Fire Retardant Basalt Fibre Reinforced Intumescent Coating with Aluminum Trihydrate (ATH) for Fire Retardancy Protection of Structural Steel. [Final Year Project]
Mohd Saiful Bahren, Mohd Danial (2016) Small Car Carbon Dioxide Emission Analysis Through Drive Cycle Patterns on Chassis Dynamometer. [Final Year Project]
Nordin, Amzani Nazmi (2016) Performance Monitoring Analysis of Centrifugal Compressor Using Statistical Process Control. [Final Year Project]
Rabie, Fatthie Khairullah Hishyam (2016) INFLUENCE OF TEMPERATURE ON STABILITY OF ALUMINUM FOAM CELL WALL DURING FOAMING PROCESS. [Final Year Project]
Kamalruzzaman, Muhammad Fadhullah (2016) Prevention of Evaporative Water Loss in Water Reservoir Dam. [Final Year Project]
Osmira, Nur Husna Anira (2016) Development of Markov Model for Piping System Reliability Analysis Subjected to Corrosion Under Insulation. [Final Year Project]
Faris, Muhamad Arif (2016) CREEP ASSESSMENT OF REFORMER TUBE BY ULTRASONIC ATTENUATION AND MICROSTRUCTURE ANALYSIS. [Final Year Project]
Zulkipli, Muhammad Shamil (2016) Performance Study on Hot Air Recovery for Solar Thermoelectric Cooler System. [Final Year Project]
A/L Vijayakumaran, Harrivin (2016) Simulation of Swirling Wet Steam Flow through a Supersonic Nozzle. [Final Year Project]
Ibrahim, Muhamad Farhan (2016) Failure Analysis of Hacksaw Blade. [Final Year Project]
JOHARRY, SITI HAJAR (2016) ANALYSIS AND CLASSIFICATION OF PAP SMEAR CELLS USING SHAPE FEATURES. [Final Year Project]
Abdelhafiz Musa, Ahmed Abdelrahman (2016) HARMONICS IMPACT ON LOW VOLTAGE (LV) GRID CONNECTED SOLAR PHOTOVOLTAIC (GCSPV) SYSTEM. [Final Year Project]
Al Azemi, Fahad (2016) THE STUDY OF THE FATIGUE CHARACTERISTICS OF BITUMINOUS MIXTURES CONTAINING DEFFERENT AGGREGATE TYPES. [Final Year Project]
ABDUL MUIS, MUHAMAD AZIM (2016) Potential Application of Biocomposite from Seaweed as a Green Construction Material. [Final Year Project]
Earn, Evon Goh Eu (2016) Development of a New Beam System Based on the Pre-Stressing Concept of Bicycle Wheel. [Final Year Project]
Mohamad Idris, Irham Hameeda (2016) Development of Low Thermal Mass Cement Block Using Peat Soil and Effective Microorganism. [Final Year Project]
Shiong, Ernest Ho Zhan (2016) Testing The Efficiency And Re-evaluating the design on the Removal of Organics With the Usage of Baffled Integrated Suspended Growth System. [Final Year Project]
Kamarudzaman, Nur Zahidah (2016) Prediction of Flow Resistance using Artificial Neural Network (ANN) in Natural Vegetated Channel. [Final Year Project]
Mohamed Raffek, Mohamed Ashnor (2016) Predicting Standard Penetration Test (SPT-N) Value from Electrical Resistivity Result. [Final Year Project]
Kamarudin, Mohamad Aiman Syafiq (2016) The Comparison of Bearing Capacity Calculation Obtained based on SPT-N from Seismic Survey against Strength Parameters (c’ and φ) value from Soil Drilling. [Final Year Project]
Zul Kamal, Nurul Atiqah (2016) The Characteristics of Tsunami Deposit based on Mineralogy Studies. [Final Year Project]
Mohd Sharif, Noor Shaerra Amiera (2016) Road Speed Profile at Accident Prone-Areas in Universiti Teknologi PETRONAS (UTP). [Final Year Project]
Mahmud, Nur Shafiqa Aquilah (2016) Water Quality Assessment of Downstream Penang River and Heavy Metals Accumulation in Seagrass. [Final Year Project]
Samsuddin, Nur Syasalbila Peat soil is one of the most soft soils ever exis (2016) Stabilization of Peat Soil by Using Effective Microorganism (EM). [Final Year Project]
Zakaria, Zuhaiza (2016) Assessment of GPS Accuracy in Detecting Simulated Reservoir Subsidence. [Final Year Project]
Abdul Aziz, Amirul Afif (2016) Mangrove Capability as Natural Coastal Defense Using Remote Sensing and GIS Assessment. [Final Year Project]
Ahmad, Muhamad Arif (2016) Effect of Axial Loading On the Lateral Behaviour of the Precast Post-Tensioned Segmental Column. [Final Year Project]
Mat Yaacob, Muhd Azmi (2016) Framework for Effective Safety Management in Construction Projects. [Final Year Project]
Zainal Ariffin, Azree Farees (2016) The Effect Of Compaction Temperatures On The Marshall Properties Of Asphaltic Concrete. [Final Year Project]
Zulkafly, Muhammad Hafiz (2016) Determination Spatial Location of Regional Landslide Using GIS. [Final Year Project]
Kamarul Bahrin, Nurul Syahirah (2016) Modelling Pore Water Pressure Using Sigmoid Kernel Function. [Final Year Project]
Sa’adan, Nurulain (2016) Development of a Solar Distilling Roofing System for Drinking Water Supply. [Final Year Project]
Mohd Sahimy, Mohamad Razman (2016) Hydrodynamics and loadings of tsunami waves with different fluid characteristics: Newtonian & non-Newtonian. [Final Year Project]
Mohd Sharil, Muhammad Shameer (2016) Solar Roof Distilling Tiles. [Final Year Project]
Saadon, Muhammad Syukri (2016) Wave Transmission and Reflection of the Alternatively Submerged Geotube Breakwater. [Final Year Project]
Najmudin, Nor Syahirah (2016) Comparative analysis of lateral earth pressure acting on braced excavation wall. [Final Year Project]
Mohd Yusuf, Muhammad Firdaus (2016) CHARACTERIZING SURFACE GROUND SETTLEMENT INDUCED BY UNDERGROUND TUNNEL EXCAVATION. [Final Year Project]
MOHD MUKHTAR, MUHAMMAD ZAID (2016) ESTIMATION OF POLLUTANT CONCENTRATIONS AT ROAD INTERSECTION IN SERI ISKANDAR. [Final Year Project]
Amir Abdul Halim , Nur Amanina (2016) Evaluation of Modular Channel in Term of Flow Resistance. [Final Year Project]
Mohd Salleh, Muhammad Farid (2016) Performance of Geopolymer Concrete in Aggressive Environment. [Final Year Project]
Abd Sukur, Nur ‘Amirah (2016) Modelling Surface Mapping for Engineering Application. [Final Year Project]
Mohd Anuar, Nurulain Husna (2016) PREDICTION OF SOIL PORE WATER PRESSURE RESPONSES TO RAINFALL USING RADIAL BASIS KERNEL FUNCTION. [Final Year Project] (Submitted)
Kamalruzzaman, Muhammad Badrulnizam (2016) Compression Behaviour of Black Shale and Weathered Chert in Pokok Sena, Kedah. [Final Year Project]
MD DESA, MUHAMMAD AMIN (2016) APPLICATION OF SHAPE MEMORY ALLOY IN REINFORCED CONCRETE STRUCTURE. [Final Year Project] (Submitted)
RAFLI, MUHAMMAD ASRAF (2016) WAVE HYDRODYNAMIC INTERACTION STUDY ON ARTIFICIAL REEF BREAKWATER. [Final Year Project] (Submitted)
MOHD LAZI , MOHAMAD HAFIDZ (2016) A COMPARISON STUDY OF BIOPOLYMER WITH ALUM IN THE TREATMENT OF WATER. [Final Year Project] (Submitted)
AZHAR, MOHAMAD HAIQAL (2016) TIME DEPENDENT RELIABILITY ASSESSMENT OF MALAYSIA’S JACKET PLATFORM. [Final Year Project] (Submitted)
HUSSEIN ELHASSAN, MOHAMED SALAHELDIN (2016) THE STUDY OF THE STRIPPING PROPERTIES OF BITUMINOUS MIXTURES CONTAINING DIFFERENT AGGREGATE TYPES. [Final Year Project] (Submitted)
ABOU ELAIZ, AHMED MAMDOUH (2016) SLAG BASED CONCRETE. [Final Year Project]
POULINO, MBIKOYESU MOSES (2016) Corrosion modeling for condition assessment of offshore jacket Leg for life extension. [Final Year Project]
MUSA, NUR NASHA (2016) POST FLOOD ASSESSMENT IN PERAK TENGAH. [Final Year Project]
Mohamad Arba’i, Nurul Afiqah (2016) Radial Interaction for Corrosion Defects in Offshore Pipeline. [Final Year Project]
SULAIMAN, NUR SHAZMEEN (2016) LOAD DEFLECTION OF ENGINEERED CEMENTITIOUS COMPOSITES (ECC) OF REINFORCED SLAB. [Final Year Project]
KANESAN, KAARTHIK (2016) Thermal maturation and stratigraphy of the black shale beds in Kanthan, Kinta Valley. [Final Year Project]
Mohd Hailami, Nur Nadhirah (2016) Sedimentology and Stratigraphy of Two Mesozoic Successions along the Jerantut-Maran Road, Pahang. [Final Year Project]
Harolanuar, Nurul Ain (2016) Prospect Mapping of Kerry Field, Taranaki Basin. [Final Year Project]
MOHD AKHIR, NADIRA WAHIDA (2016) GENERAL GEOLOGY AND ENGINEERING GEOLOGY, KM76 - KM61 LOJING-GUA MUSANG ROAD, KELANTAN. [Final Year Project]
Ong, Ching Yee (2016) Geology of Batu Gajah with Emphasis on the Characteristics of Carbonaceous Schist for Hydrocarbon Prediction. [Final Year Project]
Gobalu, Mohhan (2016) Study of Semanggol Formation: Comparison of Porosity and Permeability in Different Depositional Environments. [Final Year Project]
Zainudin, Qistina (2016) A Study on Structural Patterns of Trap Systems in K Field, Taranaki Basin, New Zealand. [Final Year Project]
Ruslan, Nurquratul Atiqah (2016) Sedimentology and Structural Geology of Parit Sulong, Johor. [Final Year Project]
Abdul Hakim, Siti Amanina Farhanah (2016) Application of Seismic Geomorphology and Spectral Decomposition: A Case of Field B in PM318 Block, Malay Basin. [Final Year Project]
Abd Hafidz, Muhammad Ashraff (2016) Monitoring the Influence of Different Fluid Saturations Using Ultrasonic Velocity and Resistivity Measurement. [Final Year Project]
Zulkifli, Muhammad Ridhwan (2016) Geology, Petrology and Fracture Survey Of Granite In Lumut Area, Perak. [Final Year Project]
Chandi, Hanis Nashrah (2016) Geology of Bekenu Area with the Emphasis of Black Shale Properties. [Final Year Project]
Azahari, Norfahira Najeehah (2016) General Geology of the Semanggol Formation in Bukit Kukus, Kedah with Emphasis on Deformation within Lower Chert Member. [Final Year Project]
Mohamad Nizu, Nurul Ain (2016) General Geology and Engineering Geology from KM61 to KM50 Jalan Lojing – Gua Musang, Kelantan. [Final Year Project]
Abu Bakar, Nurin Firzanah (2016) Geology of Setap Shale Formation, Sarawak - Sector 3. [Final Year Project]
MOHD AZAM, MOHD AMIRUL NASRIN (2016) GENERAL GEOLOGY AND ENGINEERING GEOLOGY AT KM40-KM30 LOJING-GUA MUSANG ROAD, KELANTAN. [Final Year Project]
Mohd Roslan, Siti Nurfathi Athira (2016) Geology of Gunung Kandu Area, Gopeng with Emphasis on Rock Slope Stability. [Final Year Project]
Azhar, Fatin Solehah (2016) Geology of the Kampar Area with Emphasis on Geological Resources. [Final Year Project]
Mohd Zaihan, Muhammad Zarief Fittry (2016) Detection of Potential Shallow Hazards through Shallow Subsurface Mapping at Bujang Field: Malay Basin. [Final Year Project]
Anuar, Nurfarhana Aisya (2016) Potential Tsunami Impact to Coastal Vegetation and Geological Landscape at Pantai Batu Rakit, Kuala Terengganu. [Final Year Project]
MAHAMUD, AHMAD HAFIZUDDIN (2016) STRUCTURAL GEOLOGY AND MINERALOGY OF THE SEMANTAN FORMATION (MIDDLE-UPPER TRIASSIC) AROUND TEMERLOH, PAHANG. [Final Year Project]
Mohd Nasir, Asyraf (2016) KIRCHHOFF PRE-STACK DEPTH MIGRATION ON COMPLEX STRUCTURES. [Final Year Project]
Omar, Mohammad Ali Syafiq (2016) Prospect Mapping Of Reservoir Z, Maari-Manaia Field, Taranaki Basin, New Zealand. [Final Year Project]
Ahmad, Muhammad Hafiz (2016) General Geology With Emphasis On Structural Geology Of The Chert Member Of Semanggol Formation, Kebun 500, Pokok Sena, Kedah. [Final Year Project]
Yakee, Nur Aishi (2016) General Geology of Semanggol Formation in Kg Rambutan, Pokok Sena area, Kedah with Emphasis on Deformation within the Chert Member. [Final Year Project]
Ahmad, Bahauddin (2016) Geology and Structural Geology at Kg. Gajah, Perak. [Final Year Project]
Baharudin, Siti Nur Amiha (2016) Seismic Attributes Analysis of Fluvial Channel in Angsi Field, Malay Basin. [Final Year Project]
Ewan, Amirul Hani (2016) Extended Elastic Impedance Analysis for Rock Properties Prediction from Seismic Data. [Final Year Project]
HASSAN, ASIYAHTUL HUSNA (2016) Sedimentology and Structural Geology of Ayer Hitam area, Johor. [Final Year Project]
Mohammad, Mohamad Asyraf (2016) Stratigraphy and Depositional Model of the Chert Member of the Semanggol Formation, Kebun 500, Pokok Sena, Kedah. [Final Year Project]
Muhammad Hasni, Danial Ilman (2016) Terrain Characterizations and Classifications of Semanggol Formation and Its Adjacent Areas by Using Remote Sensing and GIS Techniques. [Final Year Project]
Mubin, Mukhriz (2016) STUDY OF DISSOLUTION FEATURES IN CARBONATE RESERVOIR IN CENTRAL LUCONIA PROVINCE, SARAWAK. [Final Year Project]
Hamzah, Muhamad Hakimin (2016) PROVENANCE STUDY ON SANDSTONE OF KATI FORMATION. [Final Year Project]
Muhammad Nizam, Hariz Asnawi (2016) General Geology and Petrophysical Properties of Interval III (300 M to 400 M) in Well CTW01 : Input for the Geologic Model of Seri Iskandar. [Final Year Project]
Ku Yusoff, Tengku Ahmad Imran (2016) Sedimentology and Geomorphology Analysis of Coastal Area Along Pantai Penarik, Terengganu before and During Northeast Monsoon Season. [Final Year Project]
Zoolkepli, Izzaty Hannis (2016) The Investigation on Geomechanical Properties of Shale from Semanggol Formation, Bukit Merah as Analogue to Cap Rock Integrity for Hydrocarbon Sealing. [Final Year Project]
Dahlan, Mohamad Khalil (2016) Geology of Setap Shale Formation (Sector 7), Miri, Sarawak, Malaysia. [Final Year Project]
Mohd Naguib, Muhammad Naqiuddin (2016) Rock Slope Stability at Bukit Permata, Lumut, Perak. [Final Year Project]
Sulaiman, Mohamad Noor Solehin (2016) General Geology and Petrophysical Properties of Interval II (200 M to 300 M) in Well CTW01: Input for the Geologic Model of Seri Iskandar. [Final Year Project]
Baharuddin, Nursyafiqah Auni (2016) GEOLOGICAL RESOURCES OF GUNUNG KANDU, KINTA VALLEY, PERAK. [Final Year Project]
Boon Hong, Philip Goh (2016) RHU 3D SEISMIC DATA REPROCESSING, OFFSHORE PENINSULAR MALAYSIA. [Final Year Project]
Ramzi, Muhamad Syafiq (2016) Mineralogy and Geochemistry of the Black Shales, Selangor. [Final Year Project]
Medhi, Muhammad Fakhrul (2016) Hyperbilirubinemia Treatment Device. [Final Year Project] (Submitted)
BOLHASSAN, NURUL SHAFINAZ (2016) IMPLEMENTATION OF NORMALIZED PID CONTROLLER FOR SYSTEMS WITH VARYING DELAY. [Final Year Project] (Submitted)
Ali Ahmed, Hassan Abdelrahman (2016) Investigation in to Energy Storage of Solar Energy Harvesting Wireless Sensor Network. [Final Year Project] (Submitted)
Roslan, Muhamad Fazril (2016) Power Flow Study for UTP Microgrid. [Final Year Project] (Submitted)
MD SHAKUR, NUR FATEHAH (2016) Development of Wireless Transmission Device For Current Detector for AC Motor. [Final Year Project] (Submitted)
HASHIM, MOHD ASYRAF (2016) AUTOMATED IP CAMERA: ATTENDANCE BASED APPLICATION USING FACIAL RECOGNITION. [Final Year Project] (Submitted)
Selvathurai, Govindarajoo (2016) Development of Instrumented Cane for Control of Exoskeleton of Lower Limb. [Final Year Project] (Submitted)
Sukri, Ahmad Nasif (2016) DOCUMENT CONVERTER USING SMARTPHONE TO REFRESHABLE BRAILLE READER. [Final Year Project] (Submitted)
Mohd Kamarudin, Nur Eliza (2016) DEVELOPMENT OF IRIS RECOGNITION SYSTEM. [Final Year Project] (Submitted)
ABDUL MANAB, MUHAMMAD ZHARIF (2016) EFFICIENT AND ROBUST VESSEL DETECTION SYSTEM. [Final Year Project] (Submitted)
Ismail, Muhammad Harris Fahmi (2016) Segmentation of Synthetic Aperture Radar (SAR) Image Using Graphcut. [Final Year Project] (Submitted)
ZAKARIA, MUHAMMAD HAFIZZUDDIN (2016) Comparative Investigation of Optimization Techniques for Photovoltaic Based Multilevel Inverter. [Final Year Project] (Submitted)
Makhtar, Muhammad Makram (2016) Inter-Robot Data Exchanged for Locomotion and Localisation. [Final Year Project] (Submitted)
Sihar, Nur Ain (2016) State of Charge Estimation for Lithium Polymer Batteries. [Final Year Project] (Submitted)
Ab Rahman, Luqman Nur Hakim (2016) VOLTAGE STABILITY ANALYSIS FOR ENSURING POWER SYSTEM STABILITY. [Final Year Project] (Submitted)
Omar, Nurul Syuhada (2016) Rapid Data Exchange Using RFID for Examination Result Process. [Final Year Project] (Submitted)
Norman, Nazrul Iqhwan (2016) Embedded System for Train Track Quality Assessment. [Final Year Project] (Submitted)
HAMDAN, MUHAMAD HARITH (2016) System Integration and Experimentation for Energy Management System (EMS) Controller for Split-Parallel HEV. [Final Year Project] (Submitted)
Min Chai, Sheng Le (2016) Design & Development of 3 Degree of Freedom Robot Controller. [Final Year Project] (Submitted)
Abdul Aziz, Ahmad Farhan (2016) Induction Motor Performance During Voltage Dip. [Final Year Project] (Submitted)
Zemri, Nurul Syuhadah (2016) Development of an Automated Three-Phase Distribution Box System. [Final Year Project] (Submitted)
Mohd Tarik, Mohammad Haizad (2016) Design and development of fuzzy logic controller for cascade control application. [Final Year Project] (Submitted)
Mohd Misri, Sarah (2016) Development of the Circuit to Detect Electric Currents in AC Motors for Wireless Monitoring. [Final Year Project] (Submitted)
Hussin, Nur Ain Nabilah (2016) Thermal Analysis of Semiconductor: Peak Junction Temperature Prediction. [Final Year Project] (Submitted)
Ahmad, Nur Adzirah (2016) Microcontroller Based High Brightness LED Lighting Control for Hybrid Vehicles. [Final Year Project] (Submitted)
Ibrahim, Mohamad Haidar (2016) Flexible and Stretchable 3D Graphene/PDMS/PET composite film for strain sensing application. [Final Year Project] (Submitted)
AUGUSTIN JOHN, ALVIN ANAND (2016) Integration of Key Building Blocks for Search and Rescue Robots (Serabot). [Final Year Project] (Submitted)
Mohammad Yatim, Amirah Izzati (2016) Mobile Robot with Navigation Control and Communication. [Final Year Project] (Submitted)
KHALID, HESHAM (2016) Study and Analysis of Power MOSFET Characteristics in Radiation Environment. [Final Year Project] (Submitted)
Zakaria, Siti Zubaidah (2016) MULTI-HOP WIRELESS SENSOR NETWORKS FOR REMOTE MONITORING OF SOIL MOISTURE. [Final Year Project] (Submitted)
Adnan, Anas (2016) Development of WirelessHART Adapter For Control Valve Actuation. [Final Year Project] (Submitted)
Md Fuad, Muhammad Aiman (2016) Investigation On The Current Amplification For Multiple Input RF Energy Harvester Circuit. [Final Year Project] (Submitted)
Sulaiman, Sufi Sayyid (2016) Articulated Three Degree of Freedom (DOF) Robot Arm Manipulator Design. [Final Year Project] (Submitted)
Amalludin, Nurul Syuhada (2016) Early Detection Basal Stem Rot (BSR) using Electrical Capacitance Tomography (ECT). [Final Year Project] (Submitted)
Mohammad Azam, Siti Fatimah (2016) Remote Temperature Sensing in Campus: An Internet of Things Environmental Monitoring Application. [Final Year Project] (Submitted)
Abdul Somad, Aiman (2016) Comparative Study of Different Coil Geometries for Wireless Power Transfer Using Finite Element Method. [Final Year Project] (Submitted)
Zakaria, Abdul Aziz (2016) Automatic License Plate Recognition Software for Malaysian Vehicle License Plates. [Final Year Project] (Submitted)
YUSOF, HASAN KARAMI (2016) I-V CHARACTERISTICS OF GRAPHENE FIELD EFFECT TRANSISTOR. [Final Year Project] (Submitted)
Zulkurnain, Zulmukhris Hazazi (2016) Smart Motor Driver System for Speed and Position Control of a DC Geared Motor. [Final Year Project] (Submitted)
Azman, Muhammad Amirul (2016) Segmentation and Cell Counting of Fluorescence Oral Cancer Cell Images Using Morphological Operations. [Final Year Project] (Submitted)
Kamarudin, Zul Atiff (2016) Battery Management System for Wireless Mobile Charging. [Final Year Project] (Submitted)
ABDUL GHAFOOR, MUHAMMAD HAFIDZ (2016) A SOLAR RADIATION PREDICTION MODEL FOR APPLICATIONS IN ENERGY HARVESTING. [Final Year Project] (Submitted)
SUHAIRY, MUHAMMAD SHAZWAN (2016) COMPARATIVE STUDY OF DIFFERENT COIL GEOMETRIES FOR WIRELESS POWER TRANSFER USING PROTOTYPES. [Final Year Project] (Submitted)
MOHD ZULFAKHAR, ANIS INSYIRAH (2016) THE EFFECT OF MILD EXERCISE ON ATTENTION PERFORMANCE AND STRESS LEVEL. [Final Year Project] (Submitted)
Mohd Rawi, Noor Aiman Zafira (2016) Camera Alignment System for Face Detection. [Final Year Project] (Submitted)
Ab Rahman, Firdaus (2016) SOLAR BATTERY STORAGE SYSTEM. [Final Year Project] (Submitted)
Md Said, Mohd Shahruddin (2016) Dynamic Stability of Aerostat-Drone. [Final Year Project] (Submitted)
Krishnan, Yoghender (2016) 3D Fish Culture. [Final Year Project] (Submitted)
MOHAMED YOUSUFF, FARWIZAH (2016) WATER WAVE AND ENERGY GENERATOR. [Final Year Project] (Submitted)
Lau , Kah Mun (2016) Investigation of Heat Transfer Losses to the Combustion Chamber Wall of a Linear Generator Engine. [Final Year Project] (Submitted)
Saw , Nixon Hong Ken (2016) FPSO Mooring Line Fatigue. [Final Year Project] (Submitted)
Kardan, Ramtin (2016) Combustion Characteristics of a Curved-Cylinder Crank-Rocker Engine. [Final Year Project] (Submitted)
Mohamed Yunus, Mohmed Azman (2016) Simulation of Parabolic Trough Collector (PTC) for Direct Steam Generation (DSG) under Malaysia Weather. [Final Year Project] (Submitted)
A/L Manogaran, Yuanath (2016) A Study of Hypertensive Retinopathy Changes and the Grading System of Hypertensive. [Final Year Project] (Submitted)
Ragab Mousa, Mahmoud Shehata AbdAlfatah (2016) Experimental Evaluation of Zero Energy PG Office Under Natural and Forced Ventilation. [Final Year Project] (Submitted)
Zulkifli, Nor Adiba (2016) Technical Losses Evaluation on UTP Electrical Network. [Final Year Project] (Submitted)
Zainalabidin, Muhammad Amirul Luthfi (2016) Effect of Agitated Turbulence on Demulsification of Crude Oil Emulsions in Production Separator. [Final Year Project] (Submitted)
Ayob, Ashaari Muhammad (2016) Dengue Spread Model using Climate Variables. [Final Year Project] (Submitted)
A/L RAMANATHAN, RAVIVARMA (2016) PERFORMANCE IMPROVEMENT OF ELECTRIC POWER GENERATION FOR OSCILLATING WATER COLUMN (OWC) WAVE ENERGY CONVERTER. [Final Year Project] (Submitted)
Ba Wazir, Abdulaziz Saleh Mahfoudh (2016) Performance Analysis and Calibration of a Novel CMOS-MEMS Humidity Sensor. [Final Year Project] (Submitted)
Abd Rahman, Hadam (2016) Neutral Earthing Impedance Design in Mitigating Third Harmonic Current At The Generator Neutral. [Final Year Project] (Submitted)
Roslee, Nur Aqilah (2016) Segmentation of MRI Prostate Images using Gaussian Mixture Models (GMMs). [Final Year Project] (Submitted)
Hassan Eltayeb, Yassin Abdelrasoul (2016) Indoor Simultaneous Localization and Mapping (SLAM) Using Laser Range Finder. [Final Year Project] (Submitted)
Omar Al-Shaeer, Osamah Hasan (2016) Design and Development of Pipeline Inspection Vehicle (PIG). [Final Year Project] (Submitted)
Raja Badrol Hisham, Raja Muhammad Nazirul Mubin (2016) FULLY AUTOMATED DIABETIC RETINOPATHY MONITORING AND GRADING SYSTEM. [Final Year Project] (Submitted)
Muhammad, Muhammad Faiz (2016) Development of A Wireless Sensor Network For Flood Monitoring. [Final Year Project] (Submitted)
SHAMSUL KAMAR, FARAH AZLIN (2016) IMAGE STITCHING USING HARRIS CORNER & SIFT FEATURES. [Final Year Project] (Submitted)
Sibawaihi, Muhammad Nizam (2016) A study on Peak-Load Shaving at UTP Hoste. [Final Year Project] (Submitted)
Zulkifli, Fadhlullah Hassan (2016) Multi-Robot Platooning Using Cameras. [Final Year Project] (Submitted)
Abdulmalik Al-Maqdad, Abdulmalik Kamal (2016) An Artificial Neural Network Model of Nutrient Release from Polymer-Coated Fertilizers. [Final Year Project] (Submitted)
Salleh, Nor Hidahayati (2016) Corrosion Damage Analysis using Image Processing. [Final Year Project] (Submitted)
Mohd Azmi, Muhammad Nazirul (2016) Indoor Lighting Coverage Simulator In A Process Plant. [Final Year Project] (Submitted)
Badrul Hisham, Nor Aqilah Amira (2016) Performance of AlGaN/InGaN Multiple Quantum Well LEDs Simulated Using COMSOL. [Final Year Project] (Submitted)
Mazlan, Suraya Fateha (2016) Development of a Powered Exoskeleton for Lower Extremities. [Final Year Project] (Submitted)
Shahabudin, Nursyamimi (2016) Design and Modelling of Portable Pico Linear Generator for Wave Energy Conversion. [Final Year Project] (Submitted)
Phoo , Khai Yong (2016) Portable EEG Systems for Application in Neuroergonomics. [Final Year Project] (Submitted)
Syafrudin, Fitri Nadia (2016) Design and Improvement of Ventilation Air Cooling System for HVAC Unit Using PID Controller and VFD Techniques. [Final Year Project] (Submitted)
Zulkofli, Muhamad Hazim (2016) Exploration of Multilevel Inverter Topology Using Single and Double Source Unit with Solar System. [Final Year Project] (Submitted)
Noor Azman, Nur Allia Ellysa (2016) Patterning Monolayer Graphene Using Plasma Etcher For Transparent Conducting Electrode Applications. [Final Year Project] (Submitted)
A/L Sivem, Prasanthran (2016) Edge Detection Algorithm For Image Processing Of Search And Rescue Robot. [Final Year Project] (Submitted)
Mohd Kamel, Muhamad Aizuddin (2016) Study and Analysis of Material Characteristics for Capacitive Coupling Wireless Power Transfer System. [Final Year Project] (Submitted)
Anuar, Nur’ Aizat (2016) Monitoring and Charging of Wheelchair Batteries Based on Internet of Things. [Final Year Project] (Submitted)
Azahar, Muhammad Zahid (2016) Development Of Electronics Scoring System To Measure Dexterity For Laparoscopy (Keyhole) Surgery Training. [Final Year Project] (Submitted)
Zafian, Syaza Syahira (2016) Simulation Of Stiffness Control In Automotive Suspension Using Matlab-Simulink. [Final Year Project] (Submitted)
Mifumu, Juan Esono (2016) Deep Learning In Retinal Vessel Extraction. [Final Year Project] (Submitted)
Shamsul Azman, Muhammad Ameer (2016) Path Planning Using Image Captured By Overhead Camera. [Final Year Project] (Submitted)
Ooi , Yong Seng (2016) Developing A Single Phase Energy Monitoring System. [Final Year Project] (Submitted)
Tan , Hon Shin (2016) Development Of Internet Of Things (IOT) For Process Control. [Final Year Project] (Submitted)
Jamil, Muhammad Akmal (2016) Study on the Effect of Syngas Fuel Temperature to the Performance of a Small-Scale Electrical Power Generator. [Final Year Project] (Submitted)
Abdul Rahim, Muhammad Adib (2016) Design and Development of 3D Printed Robotic Gripper. [Final Year Project] (Submitted)
Mohammad Rabeek, Mohamed Tawfeek (2016) Development of a Model to Predict the Global Solar Radiation Using Statistical Techniques. [Final Year Project] (Submitted)
A/L Vesvanathan, Dhivendra (2016) Performance study of an engine waste heat driven adsorption cooling for automotive air conditioning. [Final Year Project] (Submitted)
Jaini, Azmeer Zainurin (2016) Evaluation of “Rust Converter Paint” Mechanism Under Simulated Field Condition. [Final Year Project] (Submitted)
Hussein, Mohd Al Nazirul Mubin (2016) Electromagnetic Driven Wiper: Conceptual Study and Analysis. [Final Year Project] (Submitted)
Abdullah, Muhammad Al Fikhri (2016) Analysis of Instabilities Dynamics in Discontinuous Stratified Flow in Horizontal Pipeline. [Final Year Project] (Submitted)
Mahmoud, Ali Moghavvemi (2016) Investigation on the Phalange Contact Force for a 2 finger Pulley-Tendon Driven Robotic Hand. [Final Year Project] (Submitted)
Azmei, Wan Sofia (2016) Characteristics Study of Biomass Fuel from Poultry Waste using Thermogravimetric Analysis. [Final Year Project] (Submitted)
Paramaguru, Dhanis (2016) CFD Simulation of Temperature and Humidity Distribution over Large Manufacturing Facilities. [Final Year Project] (Submitted)
A.Kumar, Ganesh (2016) An effective optimization of rainwater storage tanks for different roof materials in commercial buildings. [Final Year Project] (Submitted)
Mohd Ali, Syazwani (2016) Studying the Parameters Which Affect Sprinkler Fire Protection System Performance in Buildings. [Final Year Project] (Submitted)
Anuar, Ahmad Naufal (2016) Analysis of Wheel Rolling Resistance in a Personal Electric Vehicle. [Final Year Project] (Submitted)
S/O Naranasamy, Arjun Raj (2016) Investigation on Filter Mechanism for Air Polluted Environment. [Final Year Project] (Submitted)
Ahmad Fauzi, Marwan Asyraaf (2016) Synthetic Analysis Of Fluid Flow Through Particle Image Velocimetry (PIV). [Final Year Project] (Submitted)
Danial, Hassan (2016) Study On Reduction In Heat Transfer From The Turbine To Compressor In A Turbocharger. [Final Year Project] (Submitted)
Mohammad Izani, Nik Mohd Hakim (2016) Analysis and Simulation of PDC Drill Bit Design In Mitigating Stick and Slip. [Final Year Project] (Submitted)
Wan Rahim, Wan Abdul Azeem (2016) Real Time Algorithm of Wear Detection. [Final Year Project] (Submitted)
Pang , Chang-Tze (2016) Investigation of Factors Affecting Performance of Solar Still. [Final Year Project] (Submitted)
Armo, Dinish Kumar (2016) Experimental Study of Chloride Stress Corrosion Cracking In Stainless Steel. [Final Year Project] (Submitted)
Anak Richard, Angel (2016) Quality Characterization of the Vacuum-Bagging-Only (VBO) – Out Of Autoclave (OOA) Cured Composite Panels. [Final Year Project] (Submitted)
Zawawi, Muhammad Helmi Zin (2016) Thermodynamic Modelling of Organic Rankine Cycle (ORC) for Waste Heat Recovery of a Gas Turbine Engine. [Final Year Project] (Submitted)
A/L Ramesh, Potriyan Sivanathan (2016) Performance Evaluation of Fixed Plate Air To Air Energy Recovery Heat Exchanger in Buildings Air Conditioning System. [Final Year Project] (Submitted)
a/l Jeyaprakasam, Gajendran (2016) Study of Free Falling Particle in Viscous Fluid. [Final Year Project] (Submitted)
Ali, Lina Fahimah (2016) Development of Excel Based Reliability Model to Estimate Life Distribution of Mechanical Seals. [Final Year Project] (Submitted)
Subramaniam, Ramesh (2016) Experimental Study of Paraffin Wax Precipitation and Its Effect on Corrosion Behavior of Carbon Steel Pipeline. [Final Year Project] (Submitted)
Ngaing , Ing Kai (2016) Experimental Investigation of Engine Performance and Exhaust Emissions of DI Diesel Engine using various Water in Diesel Emulsion. [Final Year Project] (Submitted)
Zakaria, Mohd Zakwan (2016) Enhancement Of Strength And Fire Resistance Properties Of Intumescent Coatings By Basalt Fibre. [Final Year Project] (Submitted)
a/l N.Rajandran, Vinod (2016) New innovative methodology concept for Product Development Process. [Final Year Project] (Submitted)
a/l Gurdial Singh, Dalvinder Singh (2016) Performance Analysis of Ice Crystals Collection Mechanism in a Freezing Desalination Process. [Final Year Project] (Submitted)
Thomas Martin, Diana Lia (2016) Process Improvement in Healthcare through the Application of Lean Concepts. [Final Year Project] (Submitted)
Saiful Bahri, Laila Izyana (2016) Thermodynamic Analysis of Organic Flash Cycle (OFC) for Power Generation from Low to Medium Heat Sources. [Final Year Project] (Submitted)
Yegarajoo, Seridheren (2016) Design Smart In-Field Liner Hose IFL for Offshore Petroleum Pipeline Rehabilitation. [Final Year Project] (Submitted)
A/L Christopher, Benedict Chris (2016) Evaluation On Corrosion Resistance Of X-65 Pipeline Steel To Various Species Of Microbes. [Final Year Project] (Submitted)
Abdullah, Ahmad Afif (2016) Solar Desiccant Cooling System. [Final Year Project] (Submitted)
A/L Dev Kumar, Sujev Kumar (2016) Enhancement of Fire Resistance of Intumescent Coatings by Basalt and Refractory-Type Hybrid Fibre. [Final Year Project] (Submitted)
Nor Azlan, Adam (2016) Failure Analysis of Broken Pump Shaft. [Final Year Project] (Submitted)
Sayid Basri, Sayid Izwan (2016) Study on Irreversible and Coefficient Performance of Double Effect Lithium Bromide and Water Steam Absorption Chiller. [Final Year Project] (Submitted)
Krishnamoorthy, Shasidaran (2016) Optimum Welding Parameters for Pipeline Welding Using Artificial Neural Network. [Final Year Project] (Submitted)
Ramachanderan, Mageshwaran (2016) Development and Char Morphology Analysis of Siloxane Based Intumescent Fire Retardant Coatings. [Final Year Project] (Submitted)
Wolian, Duku Paul (2016) Characterization and Properties of Powder Metallurgy Alumina-Copper Ceramic Composites. [Final Year Project] (Submitted)
CHEONG, WILLIES Y.D (2016) Thermal Efficiency Study of the Combustion Chamber Designed for Small Scale Gas Turbine Engine Transformed from Turbocharger. [Final Year Project] (Submitted)
Hassan, Abdullah Fahmi (2016) Evaluation of Hydrogen Embrittlement on Pipeline Steel Due to Cathodic Protection Overpotential. [Final Year Project] (Submitted)
Rushdan, Muaz (2016) General Characteristics of Rain Triggered Shallow Landslide and Driven Landslide. [Final Year Project] (Submitted)
Mohamed Salleh, Putra Ahmad Khalifa (2016) PORTABLE STABILIZER FOR PICO-SCALE BUOY GENERATOR. [Final Year Project]
MUHAMAD BARZANI, FADHIL (2016) UNMANNED AERIAL VEHICLE (UAV)-DRONE UNDER ROBOT OPERATING SYSTEM (ROS) FOR OBSTACLE AVOIDANCE via TAG RECOGNITION. [Final Year Project]
Osman, Hala Hatim (2016) ARTERIAL PULSE WAVEFORM AND ESTIMATION OF BLOOD PRESSURE. [Final Year Project]
Mohamed, Azza Hashim (2016) Keyboard-less System Using EEG Signals. [Final Year Project]
ALFIAA BASALLOM, SADDAM HASAN (2016) AN INVESTIGATION ON DEVELOPMENT OF A FUZZY CONTROLLER FROM THE VIEW OF STATE-SPACE SYSTEM. [Final Year Project]
Luka, Mawa Patrick (2016) IMPROVEMENT OF GEOPHONE SENSITIVITY AT LOWER FREQUENCY (1 to 8HZ). [Final Year Project]
Awadh Ba Dhib, Mohammed Ali (2016) MECHANICAL PROPERTIES OF HYBRID FIBER REINFORCED REACTIVE POWDER CONCRETE. [Final Year Project]
SATHIVEL, SHALINI (2016) Prediction of Pore water Pressure Responses to Rainfall Using Auto Regressive Integrated Moving Average Method (ARIMA). [Final Year Project]
Daro, Chhorn (2016) COMPUTING THE MINIMUM DISTANCE BETWEEN A POINT TO A NURBS CURVE. [Final Year Project]
Abdullah Yaslam Al-Mashgari, Hafedh (2016) LESSONS LEARNED FROM THE 2011 GREAT EAST JAPAN EARTHQUAKE TRIGGERED TSUNAMI. [Final Year Project]
Mohd Zahid, Puteri Nor Atikhah Fadhilah (2016) Enhancing Productivity of Passive Solar Still Using Black Cylindrical Fins. [Final Year Project]
SALVADOR MAMBO, ACACIO (2016) INVESTIGATION ON INCREMENTAL WAVE ANALYSIS METHOD IN JACKET PLATFORM REASSESSMENT. [Final Year Project]
ZAABA, FADIA DYNI (2016) ENGINEERING PROPERTIES OF BITUMINOUS MIXTURES CONTAINING HYDROPHILIC AND HYDROPHOBIC AGGREGATES. [Final Year Project]
Mohamad Kassim, Azmiera (2016) Effect of Sacrificial Anodes on the Wave Forces on Jacket Members. [Final Year Project]
AWADH AHMED BA RAHMA, AHMED (2016) NONLINEAR FINITE ELEMENT ANALYSIS OF THIN-WALLED STEEL TUBE AND CONCRETE-FILLED STEEL TUBE (CFT) COLUMNS. [Final Year Project]
HUSSEIN, KARAMA SAEED AL-JABERI (2016) Investigation the Properties of Ultra High Performance Concrete - Compressive Strength. [Final Year Project]
MOHAMMED ABOUD MAFAILEH, ALA (2016) Effectiveness of Safety management practice in construction projects. [Final Year Project]
Mohammed Salem Alqoushah, Sulaiman (2016) Experimental Study on the Effects of Various Scale Ratios of Physical Models on the Prediction of the Semi-Submersible Platform Dynamic Motions. [Final Year Project]
Shoghi, Mohammad Javad (2016) Performance of ECC Link Slab. [Final Year Project]
Mohd Shariff, Jakiah Shahira (2016) Nutrients Removal (Nitrogen) From the Wastewater in an Integrated Wastewater Treatment Reactor. [Final Year Project] (Submitted)
MOHD SAAD, NOR HASWANI (2016) PREDICTION OF PORE WATER-PRESSURE USING GENERALIZED REGRESSION NEURAL NETWORK. [Final Year Project]
SALEH MOHAMMED AL-AQEL, ABDULLAH (2016) A NOVEL FLOATING SOLUTION FOR MARGINAL FIELDS IN CHALLENGING OIL ECONOMICS. [Final Year Project]
Ramlee, Mohd Firdaus (2016) Heave Response of Truss Spar Due to Truss Member Losses. [Final Year Project]
Saad Qasim, Muthanna (2016) EVALUATION OF ECC BASED ON UPV AND REBOUND HAMMER TESTS. [Final Year Project]
Rafeek, Mohamed Rizwan (2016) Adsorption and Desorption Mechanism of Oil Palm Empty Fruit Bunch Grafted Polyvinyl Alcohol (OPEFB-g-PVA) Hydrogel in Nickel(II) Removal. [Final Year Project] (Submitted)
Ahmad Kujaji, Muhammad Hilmi (2016) Energy Optimization of Combustion Process in Carbonization Chamber via Computational Fluid Dynamics (CFD) Approach. [Final Year Project] (Submitted)
Ariffabilah, Muhammad Ilyasa Saffiq (2016) Isotherm Prediction Of Various Adsorbents On Moisture Removal From Ambient Air By Solver Function. [Final Year Project] (Submitted)
Ramali, Azlan (2016) Medicinal Compound Extraction from the Whole Body of Cynodon Dactylon (L.) Pers. by Using Hot Water. [Final Year Project] (Submitted)
Mahmud, Ilya Amanina (2016) Inherent Safety Level Assessment of Process Stream Index (PSI): A Case Study of Bio-Refinery Plant. [Final Year Project] (Submitted)
Ahmad Farid, Muhammad Nazrin (2016) Flammable and Thermal Analysis of Biodiesel Blends at Different Composition. [Final Year Project] (Submitted)
Kenishan, Yakeshwaran (2016) Removal of Chromium from Wastewater using Activated Eggshells. [Final Year Project] (Submitted)
Jayabalan, Jayakumaresh (2016) Preparation and Characterization of KIT-6 / Polysulfone Mixed Matrix Membrane. [Final Year Project] (Submitted)
Wan Ameri, Wan Amirah (2016) Photocatalytic Degradation of Aqueous Ionic Liquid. [Final Year Project] (Submitted)
Thanga Raj, Joanna Ruth (2016) Characterization of Activated Carbon-Waste Tyre Char by CO2 Activation from Calcium Carbonate. [Final Year Project] (Submitted)
Mustapha, Nur Nadiah (2016) Substitution Study for Cost Effective Hybrid Power System using Power Pinch Analysis. [Final Year Project] (Submitted)
Nair Suthesan, Tharaniya S (2016) Photocatalytic Degradation of Diisopropanolamine (DIPA) in Wastewater Under Visible Light. [Final Year Project] (Submitted)
Rosli, Muhammad Haiqal (2016) Intensification Strategy For Cost-Effective Hybrid Power System Using Power Pinch Analysis. [Final Year Project] (Submitted)
Ahmad Nazmi, Amirah (2016) Harvesting of Microalgae Biomass using Bio-flocculant. [Final Year Project] (Submitted)
Jamal, Norhidayu (2016) Hydrogen Production Via Carbon Dioxide Reforming. [Final Year Project] (Submitted)
Syed Yusof, Syed Nazrin (2016) Analysis of energy production for local biomass resources in Perak Tengah. [Final Year Project] (Submitted)
Ranjit Singh, Gurjit Kaur (2016) Plant Based Dye for Dye Sensitized Solar Cells (DSSC). [Final Year Project] (Submitted)
Kuanasealan, Keshveeni (2016) Synthesis and Characterization of Coconut Pith Char Adsorbents for Carbon Dioxide Capture. [Final Year Project] (Submitted)
Ramli, Mohammad Faiz (2016) Modeling and Control of a Pilot Plant Carbon Dioxide Absorption Column for High Carbon Dioxide Content Natural Gas. [Final Year Project] (Submitted)
Ramdan, Amira Nurain (2016) Experimental and Modelling Studies of CO2 Adsorption by Activated Carbon Derived from Rubber Seed Shell. [Final Year Project] (Submitted)
Jaya, Mohd Rafaei (2016) Dry Deposition Techniques for Biobased Diabetic Inhibitor. [Final Year Project] (Submitted)
Ali Osman, Ola Abdalgawi (2016) Kinetic Evaluation of Ammonium Based Ionic Liquids for CO2 and CH4 Hydrates Mitigation. [Final Year Project] (Submitted)
Hamzah, Mohammad Farid (2016) A Study On The Function Of Thermoplastic Starch As Matrics In Biocomposite. [Final Year Project] (Submitted)
Liong, Phumphairin (2016) Preparation and Characterization of Alkaline Catalyst Waste from Eggshell for Transesterification Reaction. [Final Year Project] (Submitted)
Devan, Vaaghisen (2016) The Effect of Cross-linking Agents on Oil Palm Empty Fruit Bunch Fiber-Grafted Polyvinyl Alcohol (PVA) Hydrogel. [Final Year Project] (Submitted)
Kobal, Vinod Kanna (2016) Processing of Kapok Fiber into Biodegradable Pellets for Efficient Oil Absorption. [Final Year Project] (Submitted)
Jugindar Singh, Ashwin Pal Singh (2016) Effect of Ionic Liquid Pretreatment On the Moisture Absorption Kinetics of Oil Palm Biomass Based Composites. [Final Year Project] (Submitted)
El-tahir Mustafa, Sara Galal El-din (2016) Development and Characterization of PES/ EDA-Functionalized TiO2 Mixed Matrix Membrane for CO2 Removal from Natural Gas. [Final Year Project] (Submitted)
Osman Mohamed, Ola Yahia (2016) Dynamic Light Scattering and UV-Vis Spectrophotometric Assessment of Stability of Metal Nanoparticles in Aqueous Medium. [Final Year Project] (Submitted)
Chen, Swee Keat (2016) Graphene Oxide-Catalyzed Subcritical Hydrothermal Liquefaction of Spirulina to Bio-Oil. [Final Year Project] (Submitted)
Sek, Edmund Chun Hei (2016) Simulation of Biomass Gasification System. [Final Year Project] (Submitted)
Pang, Zhen Hong (2016) Polymer Ionic Liquid Electrolyte for Dye-sensitized Solar Cell. [Final Year Project] (Submitted)
Zukhri, Syifaa (2016) Boron Removal from Model Waste Water Using Adsorption Process: A Case Study. [Final Year Project] (Submitted)
Muhd Nor, Nik Nur Izzatul Ikmal (2016) Metalloporphyrin Encapsulated Zeolite Y for Efficient Photocatalysis. [Final Year Project] (Submitted)
Parameswaran, Shaavesh Kumaran (2016) Carbon Dioxide Solubility Study of Piperazine Added Solvent. [Final Year Project] (Submitted)
Izer, Abdullah Fahmi (2016) Prediction and Analysis of Operating Conditions of Industrial Methanol Synthesis Reactor Using Artificial Neural Network-Based Model. [Final Year Project] (Submitted)
Param Kumar, Vanisha Kumar (2016) Thermodynamic Effect Of Tetra-N-Butylammonium Hydroxide On CO2 Hydrate Promotion. [Final Year Project] (Submitted)
Desiga Vinayagam, Vimmal (2016) A Study on Rice Husk Briquette at Various Moisture Content for Energy Application. [Final Year Project] (Submitted)
Murugiah, Pannir Selvam (2016) Development of PSF/APTES-nano-MCM-48 Mixed Matrix Membrane for CO2/CH4 Separation. [Final Year Project] (Submitted)
Chong, Chao Sian (2016) Electrochemical Behavior of Natural Product as Green Inhibitor for Carbon Steel Corrosion in the Acidic Medium. [Final Year Project] (Submitted)
Salem Al-Gariri, Hesham Saeed (2016) Gravimetric Study of the Solubility and Dissociation of Benzoic Acid: Effect of Cosolvent and Temperature. [Final Year Project] (Submitted)
Sowad, Rabea Saleh Rabea (2016) Caffeine as a Green Corrosion Inhibitor for Carbon Steel in Corrosive Media. [Final Year Project] (Submitted)
Krishnan Moorthy, Vivendran (2016) Removal of Nickel from Aqueous Solution using Coconut Fiber Char as Low Cost Adsorbent. [Final Year Project] (Submitted)
Saleh Alyafeai, Ali Abdullah (2016) Storage Tank Fire - Boilover Study of Biodiesel/Biofuel. [Final Year Project] (Submitted)
Ng, Jia Ping (2016) Synthesis and Characterization of Bed Adsorbent from Coconut Shell for Separation of CO2 from Natural Gas. [Final Year Project] (Submitted)
Chiew, Chee Seng (2016) The Effect of Burning Temperature and Solution Concentration on the Characteristic of Silica Gel Extracted from Rice Husk Ash. [Final Year Project] (Submitted)
Lai, Chun Hoe (2016) Investigation of Hybrid Solvents for Absorption of CO2. [Final Year Project] (Submitted)
Tan, Wei Yein (2016) The Effect of Sodium Bicarbonate towards the Growth Performance and Biomass Production of Microalgae. [Final Year Project] (Submitted)
Sabri, Muhammad Amirul Faris (2016) Steam Reforming of Glycerol over Nickel-based Catalyst. [Final Year Project] (Submitted)
Ayub, Nur Athirah (2016) Development of Copper-based Metal Organic Framework HKUST-1 /Cellulose Acetate Mixed-Matrix Membane for CO2/CH4 Removal. [Final Year Project] (Submitted)
Baqdhimh Barashaid, Ali Abdullah (2016) Effect of Ultrasonic Frequency on the Physical Absorption of CO2. [Final Year Project] (Submitted)
Rosli, Siti Noriayana (2016) Synthesis and Characterize Geopolymer as Erosion Mitigation for Seawater Application. [Final Year Project] (Submitted)
Aznan, Muhammad Firdaus (2016) Agricultural Waste or Residue as Adsorbent for Nickel Removal. [Final Year Project] (Submitted)
Mohd Shaib, Siti Nur Fatihah (2016) Nonlinear and Linear System Identification Step Reflux Flow Rate for Distillation Column. [Final Year Project] (Submitted)
Ee, Ming Fern (2016) Dispersion and Thermal Characteristics of Functionalized Nanoparticles in Oilbased Nanofluids. [Final Year Project] (Submitted)
Vincent, Ivan (2016) Kinetics of Prilezhaev Epoxidation of Palm Olein. [Final Year Project] (Submitted)
Ahmad Fadzli, Izz Danial Al-Fayyadh (2016) Laser Target Tracking. [Final Year Project] (Submitted)
Chung Yang, Nigel Chuah (2016) Investigating the Effect of Drilling Parameters and Mud Rheology for the Flow of Yield Power Law Fluid through Annulus. [Final Year Project] (Submitted)
Elamin Elsheikh, Islam Abdalla (2016) Implementation of Asymmetric Multiprocessing Support in a Real-Time Operating System. [Final Year Project] (Submitted)
Ravichandran, Nalinii (2016) Parametric Study on Spectral Fatigue Analysis of Offshore Jacket Platform with SACS software. [Final Year Project] (Submitted)
Eisa Musa, Ahmed Yosreldin (2016) AEROSTAT EFFECT ON UAV STABILITY. [Final Year Project] (Submitted)
Robin , Low Nyok Bing (2016) Free Vibration of Precast Cold-formed Composite Beam. [Final Year Project] (Submitted)
Saleh, Muhammad Ridhwan (2016) Study on Effect of Surfactants on Dispersion Characteristics of Nanofluids. [Final Year Project]
Mohd Nasir, Muhammad Ahnaf (2016) Investigating the Effects of Addition of Different Copper Amount in Fe-Cu-C by Powder Metallurgy. [Final Year Project] (Submitted)
Mohd Zamri, Ahmad Aiman Afif (2016) Mechanical Properties of Palas Fiber Reinforced Composite. [Final Year Project] (Submitted)
Mohd Azmi, Muhamad Aizat Syafiq (2016) NITRIDING OF 2205 DUPLEX STAINLESS STEELS TO ENHANCE CORROSION RESISTANCE. [Final Year Project] (Submitted)
Nizam Shah, Muhammad A’izuddin (2016) Investigation on Grain Size Changes in Gamma Prime Precipitate on Varying Surface Location of IN738 Engine Turbine Blade. [Final Year Project] (Submitted)
Bahtiar, Muhammad Aiman (2016) Nano Polishing of Titanium Alloy with Ionic Liquid. [Final Year Project] (Submitted)
Azman, Ahmad Imran (2016) CORROSION INHIBITION PERFORMANCE BY OCTYLMETHYLIMIDAZOLIUM- BROMIDE OMIBr ON API 5L X52 STEEL IN 1.0M H2SO4. [Final Year Project] (Submitted)
Sheng, Ong Kai (2016) PDC Bit Hydraulic and Mud Rheological Simulation to Model Pressure Drop across Bit. [Final Year Project] (Submitted)
Abdullah, Abdul Haris (2016) The Comparison between SMAW and FSW Performances on Microstructure, Hardness and Corrosion Susceptibility of Carbon Steel. [Final Year Project] (Submitted)
Mohd Karim, Ariff Hakimy (2016) Design Improvement of Existing Slip-on Sprocket. [Final Year Project] (Submitted)
Yousof Kunju, Mohammad Fadzil (2016) Nitriding of A316 Stainless Steel Pipe with Improvement of Corrosion Resistance. [Final Year Project] (Submitted)
Shahrul Amar, Abdul Qayyum (2016) Investigation on the Dynamic Response of a Horizontal Axis Wind Turbine with Active Blade Pitch Control. [Final Year Project] (Submitted)
Haji Hamzah, Muhamad Syamim (2016) Study of Crude Palm Oil Diesel Blend Emission on Diesel Engine. [Final Year Project] (Submitted)
MOHD PAUZI, AIDA KHALEEDA (2016) Rotor Dynamic Analysis of Centrifugal Compressor due to Liquid Carry Over. [Final Year Project] (Submitted)
Hong, Ho Yik (2016) Burst Strength Analysis of Composite Pressure Vessel using Finite Element Method. [Final Year Project] (Submitted)
Abdullah, Abdul Hanif (2016) Effect of Ferrous (. [Final Year Project] (Submitted)
Jinal Ahbidin, Muhammad Firdaus (2016) A STUDY ON THE MECHANICAL EFFECTS OF GAS NITRIDING ON ALUMINIUM ALLOY 6061 FOR THE USE IN MOBILE PHONE CASING. [Final Year Project] (Submitted)
Mat Tasir, Muhammad Hakim (2016) OPTIMAL DESIGN OF HELICAL COMPRESSION SPRINGS. [Final Year Project] (Submitted)
Haur, Lim Chun (2016) Study on the Effect of Ultrasonic Wave Amplitude on Deemulsification of Crude Oil to enhance Production Process. [Final Year Project] (Submitted)
A/L ELIYATHAMBY, DHANARAJ (2016) Dynamic Analysis of Stick-Slip and Bit Bounce in Oilwell Drillstring. [Final Year Project] (Submitted)
A/L Prakasan, Arjund (2016) EFFECT OF TRANSVERSE, LONGITUDINAL AND VERTICAL SEPARATION ON DRAG FOR A FLEET OF AUTONOMOUS UNDERWATER GLIDER. [Final Year Project] (Submitted)
., AHMAD HASSAN (2016) FIRE HAZARDS & RISK ASSESSMENT IN OFFSHORE PETROLEUM FACILITIES. [Final Year Project] (Submitted)
JAYA RAMAN, THINESHRAAJ (2016) Study of Preferential Weld Corrosion in X52 Mild Steel with the Presence of Acetic Acid. [Final Year Project] (Submitted)
A Siaramu, Arvin Kumar (2016) A Study of Corrosion Behaviour for Steels Precipitated with Paraffin Wax Precipitation. [Final Year Project] (Submitted)
Ntutumu Nsang, Dionisio Miguel (2016) Study on Reduction of Cooling Energy for Air Conditioning by Flexible Space Compartmentalization in Residential Houses. [Final Year Project] (Submitted)
Hsien Yoong, John Voon (2016) Effect of the Length of a Torpedo Anchor on Its Vertical Holding Capacity. [Final Year Project] (Submitted)
A/L AIYYAPPAN, BHUVANA RUEBEN (2016) A STUDY OF MECHANICAL PROPERTIES AND CRUSHING PERFORMANCE OF CARBON FIBER WOUND TO HDPE PIPE (CFWHP. [Final Year Project] (Submitted)
A/L Arumugam, Thibankumar (2016) Characterization of Methane Based Graphene Synthesis on H13 Tool Steel. [Final Year Project] (Submitted)
Wei Ren, Ivan Gan (2016) Numerical Simulation of Extreme Wave Loading on Deep-water SPAR Platforms using the SPH Method. [Final Year Project] (Submitted)
A/L Muniandy, Prathab (2016) Dynamic Analysis of High Frequency Vibro-Impact Drilling. [Final Year Project] (Submitted)
Anak Biga, Blythe Kollias (2016) Characterization of Restart Pressure in Production Pipeline for Waxy Crude Oil as A Result of Injection of Non-Reacting Gas. [Final Year Project] (Submitted)
SALEM BASYOAL, OMAR AHMED (2016) Prediction of Cooling Load of a Glazed Building under Malaysia Weather Conditions. [Final Year Project] (Submitted)
MOHAMED HISHAM, MOHAMED SYAKIR (2016) A STUDY OF PHYSICAL PROPERTIES & SHOCK ABSORPTION ABILITIES OF STARCH POLYMER FOAM AS CUSHIONING MATERIAL FOR PACKAGING. [Final Year Project] (Submitted)
Zulkifli, Muhammad Zulfadli (2016) Dropped Object Protection Modelling for Subsea Equipment. [Final Year Project] (Submitted)
Mohd Zian, Muhammad Danial (2016) A Study of Acoustic Properties of Coconut Coir and Vermiculite Composite as Noise Insulation in Vehicles. [Final Year Project] (Submitted)
A/L THANARAJEE, SHAATIESH (2016) Vibration Analysis of Carbon Nanotube Based Bio-Sensors. [Final Year Project] (Submitted)
Arafat Mahdy, Amr Essam (2016) Investigation on The Effect of Drill Diameter During Bone Drilling for Surgery Applications. [Final Year Project] (Submitted)
Yaw, Yong Hong (2016) Single Phase Turbulent Flow Regime Characterization Using Image Processing Techniques. [Final Year Project] (Submitted)
Shuib, Siti Suhaili (2016) Simulation Study on Combustion Characteristics of Water Tube Boiler with Different Type of Fuel. [Final Year Project] (Submitted)
Jumali, Siti Nur Izzaidah (2016) Reliability, Availability and Maintainability (RAM) Analysis for Offshore High Pressure Compressor. [Final Year Project] (Submitted)
Shamsudin, Muhammad Fasha Haiqal (2016) Computational Fluid Dynamics (CFD) Study of Gas Separation Process for High Pressure Horizontal Separator. [Final Year Project] (Submitted)
Ping, See Itt (2016) Investigation of Charging and Discharging Process in a Rotating Latent Heat Storage. [Final Year Project] (Submitted)
Huat, Beh Yong (2016) Measurement of Water in Oil Pipelines using Capacitance Method. [Final Year Project] (Submitted)
PING, KAM CHONG (2016) EXPERIMENTAL AND NUMERICAL INVESTIGATION ON THE ENHANCEMENT OF NATURAL UP DRAFTING IN A CHIMNEY. [Final Year Project] (Submitted)
Sheng, Caleb Ng Zhu (2016) Assessment of the Uncoated Carbide inserts in end milling of Titanium Alloy Ti-6AI-4V. [Final Year Project] (Submitted)
Jayakumar, Khuganeswaran (2016) Investigation of Organic Rankine Cycle Using Different Working Fluids for Conversion of Low Grade Heat Sources. [Final Year Project] (Submitted)
SAZALI, SYAZWAN (2016) Vortex Induced Vibration (VIV) Reduction Measure on Dimpled Concrete Coated Pipeline. [Final Year Project] (Submitted)
Sheng, Jason Ngu Kai (2016) Preliminary Study of Renewable Pico Hydro Electrification Schemes to Improve Current Electrification Method in Royal Belum. [Final Year Project] (Submitted)
Sheng, Goh Ting (2016) The Effect of Using Coolant during Bone Drilling for Surgery Application. [Final Year Project] (Submitted)
Nizamuddin, Mohamed Fazlan (2016) Subsea Pipelines Health Prognostics Using Rate of Crack Propagation and Marco-Starkey, Cumulative Damage Theory. [Final Year Project] (Submitted)
Chai, Tan Huat (2016) Root Cause Failure Analysis (RCFA) Root Causes Categorization and Generation of Recommended Data for RCFA Investigation. [Final Year Project] (Submitted)
Mohamad Yusoff, Syaza Yasmin (2016) CFD Modeling of Thermoelectric Air Duct System for Cooling of Building Envelope. [Final Year Project] (Submitted)
Wei, Wong Hoong (2016) Setting Up a Remote Accessing of a PV Plant and Its Analysis. [Final Year Project] (Submitted)
Chi, Yew Lih (2016) Characterization and Properties of Powder Metallurgy Alumina-Iron and Alumina-Copper Ceramic Composites. [Final Year Project] (Submitted)
Hian, Kueh Seow (2016) Airflow study of a Split-Type outdoor unit subjected to near wall effect using Computational Fluid Dynamics (CFD)simulation. [Final Year Project] (Submitted)
Wan Nadhari, Wan Noor Azleen (2016) Mechanical Properties of “Mengkuang” Fibre Reinforced Composite. [Final Year Project] (Submitted)
N SETHAMBARAM, CARTHIKRAJA N SETHAMBARAM (2016) Numerical Simulation of Rock-Cutter Interaction in Drilling Operation Using ANSYS AUTODYN 3D. [Final Year Project] (Submitted)
Torng, Hea Yih (2016) On-Bottom Stability Study of Non-Metallic Pipeline Due To Hydrodynamic Loadings. [Final Year Project] (Submitted)
Chian, Cheah Zi (2016) Implementation and Justification of Innovated Three Lines Loop for Single and Multi- Phase Flows Studies. [Final Year Project] (Submitted)
A/L D. Ramanujam, Keeran Daniel (2016) Mooring Analysis of Very Large Floating Structures in Malaysian South China Sea Waters. [Final Year Project] (Submitted)
Boon, Tan Han (2016) CFD Comparative Study of 3-D Compressible Flow Over Seamless and Canard Aerodynamic Flying Bodies. [Final Year Project] (Submitted)
Yew , Jia-Wei (2016) EXPERIMENTAL AND NUMERICAL INVESTIGATION OF THE TOP PLATE INFLUENCE ON THE PERFORMANCE OF SOLAR VORTEX ENGINE. [Final Year Project] (Submitted)
Chin, Eileen Wong Wee (2016) A Study on the Fatigue Assessment of Offshore Steel Catenary Riser. [Final Year Project] (Submitted)
Abdul Rahman, Mohd Ridzuan (2016) Tensile and Flexural Properties of Woven Micro-Braided Yarn Composite. [Final Year Project] (Submitted)
Mohamad @ Rusdi, Muhammad Faez Ezanee (2016) Simulation and Modelling of a Gas Separation System. [Final Year Project] (Submitted)
Ab. Halim, Naqiatul Amirah (2016) ENHANCING THE CAPABILITIES OF SEARCH AND RESCUE ROBOT (BAMBOT). [Final Year Project] (Submitted)
Nik Ab Rashid, Nik Nur Nailini (2016) Thermal Analysis of VLSI System: A Simulation Study. [Final Year Project] (Submitted)
Istab, Nurul Azlan (2016) SEGMENTATION OF PROSTATE IN MRI IMAGES USING GRAPH-CUT SEGMENTATION. [Final Year Project] (Submitted)
Shien, Goh Aik (2016) Improving the Efficiency of an Offshore Wave Energy Converter for Power Generation. [Final Year Project] (Submitted)
A/L KUMARAN, DEVENTERAN (2016) Development of Novel Multilevel Inverter with Reduced Power Switches. [Final Year Project] (Submitted)
A/L RAJU, KISHEN RAJ (2016) ANALYSIS AND INVESTIGATION OF IMAGE TRANSMISSION VIA RADIO FREQUENCY. [Final Year Project] (Submitted)
Mohd Suhaimi, Nor Atiqah b (2016) Prediction of Peak Junction Temperature of Semiconductor Devices: A Simulation Study. [Final Year Project] (Submitted)
Mohd Aziz, Wan Shahira (2016) Harmonic Study on UTP New Building Network. [Final Year Project] (Submitted)
., Ng Yan Lim @ Chia Yan Lim (2016) Heart Disease Detection Using Mobile Phone and Wireless Sensor Networks. [Final Year Project] (Submitted)
WAN SARIS, WAN MOHD FARID (2016) FLOOD MONITORING USING AUTOMATIC PACKET REPORTING SYSTEM APRS ON VHF. [Final Year Project] (Submitted)
Hassan, Esra Ali (2016) Smart Glasses for the Visually Impaired People. [Final Year Project] (Submitted)
Cheah , Zong Yuan (2016) Nonlinear Model Predictive Control (NMPC) for Twin Rotor MIMO System (TRMS). [Final Year Project] (Submitted)
A/P SENIVASAN, SUGANTI (2016) Solar Energy Harvesting for Wireless Sensor Network (WSN). [Final Year Project] (Submitted)
Vetsandonphong, Natthawin (2016) Arduino Based Fall Detection and Alert System. [Final Year Project] (Submitted)
Ali, Amirulnaaim (2016) Modelling and Investigation of Wireless Power Transfer for Small Gap Applications. [Final Year Project] (Submitted)
Zailan, Fatin Syamimi (2016) IMPLEMENTATION OF HOME AUTOMATION USING WIRELESS COMMUNICATION. [Final Year Project] (Submitted)
SENG, LEE WENG (2016) INTERACTIVE HANDWRITING RECOGNITION FOR COURSEWORK DATA ENTRY. [Final Year Project] (Submitted)
A/L SANMUGAM, LINGESHGUGAN (2016) THE DEVELOPMENT OF DUAL BAND DRA HYBRID ANTENNA. [Final Year Project] (Submitted)
Mustaffa, Muhammad Dinie Akmal (2016) Analysis of Epileptic Seizure Using Wavelet Transform. [Final Year Project] (Submitted)
Samuji, Muhammad Fakhruddin (2016) Flood Monitoring and Alert System Using Wireless Sensor Network. [Final Year Project] (Submitted)
Mohd Isa, Mohd Fazlie (2016) Pattern Classification of Human Epithelial Images. [Final Year Project] (Submitted)
Anuar, Mohamad Syarmie Faizlin (2016) Heart Rate Monitoring and Alert System Using Smartphone. [Final Year Project] (Submitted)
Cheow , Yeng Peng (2016) Development of Graphical User Interface (GUI) for Antenna Design. [Final Year Project] (Submitted)
Ali Dousa, Somia Mohamed (2016) Data fusion of video camera and Laser Range Finder (LRF) for obstacle avoidance. [Final Year Project] (Submitted)
Madzir, Mohammad Naaim (2016) Self-powered kit for lighting system. [Final Year Project] (Submitted)
Abdullah, NurFarah Hanim (2016) Data Exchange among Multiple Robots. [Final Year Project] (Submitted)
Wee Kiat, Benjamin Chen (2016) Design and Development of Breathing Air Level Transmitter by using Arduino. [Final Year Project] (Submitted)
Yang, Por Hong (2016) Monitoring Class Attendance Via Mobile Application. [Final Year Project] (Submitted)
Mba Obama, Mari Paz Eyang (2016) Flexible Transparent Conductor Film using Graphene-Carbon Nanotubes on PDMS. [Final Year Project] (Submitted)
Yahaya, Safuan (2016) Development of Flexible 3D Graphene/PDMS Composite Film for Strain Sensing. [Final Year Project] (Submitted)
A/P Ravindran, Nandini (2016) Stroke Prediction from Hypertensive Retinopathy. [Final Year Project] (Submitted)
Woon , Tian Lok (2016) A Simplified GUI for EEG Acquisition and Signal Pre-Processing. [Final Year Project] (Submitted)
Nmdjandod , Patrick Beriman (2016) Presenter Tracking for Video Recording on Intel Galileo Board. [Final Year Project] (Submitted)
Amir Shariffudin, Amira Shakina (2016) Design & Characterization of resistance-based corrosion under-insulation sensor. [Final Year Project] (Submitted)
GHAZALI, NUR AFIFAH (2016) Third Harmonic Filter Design in Mitigating High Current At the Generator Neutral. [Final Year Project] (Submitted)
Ivan Tan, Sheng Wei (2016) Intelligent Microphone Stand. [Final Year Project] (Submitted)
Saeed Al-Haddad, Saeed Ahmed (2016) Multi-Hop Wireless Sensor Network for Continuous Oxygen Tank’s Level Detection. [Final Year Project] (Submitted)
Chee , Pui San (2016) Robotics Rehabilitation for Training and Assessment of Upper Extremities. [Final Year Project] (Submitted)
Faili, Zahra (2016) Development of Low Cost Heart Rate Monitoring Device and Classification Technique Using Fuzzy Logics Algorithm. [Final Year Project] (Submitted)
a/p Muthusamy, Mugilleswari (2016) Android Application to Detect and Alert Tachycardia and Bradycardia using Pulse Rate Sensor. [Final Year Project] (Submitted)
Mahmoud Mogalid, Sabir Salah (2016) Energy Monitoring of Energy Harvesting Wireless Sensor Networks. [Final Year Project] (Submitted)
ELTAYEB, ABUZAR MOHAMED ABDALLA (2016) DEVELOPMENT OF SOLAR ENERGY HARVESTING FOR WIRELESS SENSOR. [Final Year Project] (Submitted)
Januarisma, Vikri (2016) Eliminate P-wave Direction in Application of Exploration Seismology. [Final Year Project] (Submitted)
Thian , Xian Khai (2016) Enhancement of Power Generation by Capacitive Mixing. [Final Year Project] (Submitted)
Kung Wen, Justin Lee (2016) Design of ultralow noise and THD low pass filter for audio analyzer. [Final Year Project] (Submitted)
Mustaffa Kamal Basha, Abdul Aziz (2016) Development of LabVIEW FPGA program for Energy Management System (EMS) Controller for Hybrid Electric Vehicle (HEV). [Final Year Project] (Submitted)
Ahmad Astor, Asyilah (2016) Developing, Implementing, and Assessing Decoupling Control for UTP Air Pilot Plant. [Final Year Project] (Submitted)
Tan , Khang Lim (2016) 3D Fish Culture and Monitoring System. [Final Year Project] (Submitted)
Abdul Malek, Muhammad Fadzly (2016) AUGMENTED REALITY BASED INDOOR POSITIONING NAVIGATION TOOL. [Final Year Project] (Submitted)
Lau, Kevin (2016) Comparative Study of Different Coil Geometries for Wireless Power Transfer. [Final Year Project] (Submitted)
TAN , TECK YING (2016) Lighting System Design for Commercial Buildings with Higher Energy Efficiency. [Final Year Project] (Submitted)
Calvin , Low Eu Jin (2016) Development of a Self-diagnostic System for Photovoltaic based Highway Signage Boards and Warning Devices. [Final Year Project] (Submitted)
Wong , Keng Mun (2016) Design of Bluetooth Compatible Temperature and Photoplethysmogram (PPG) Monitoring System. [Final Year Project] (Submitted)
Yew , Jia-Ming (2016) Exploration of IEC 1131-3’s LAD and SFC Languages in PLC Programming. [Final Year Project] (Submitted)
Mustapha, Muhamad Nizam (2016) Fast Train Track Quality Measurement Using Gyro Sensors. [Final Year Project] (Submitted)
Ean , Chin Teck (2016) Real-Time Capacity Monitoring for Lithium Polymer Batteries. [Final Year Project] (Submitted)
Kang , Gim Pin (2016) Automatic Recognition of Handwritten Score Digits. [Final Year Project] (Submitted)
Khaidzi, Sharifah Nur Ainiza (2016) EFFECT OF WINDSPEED TO WAVE HEIGHT ON CONTINENTAL SHELF MALAYSIA. [Final Year Project] (Submitted)
Noslan, Muhammad Zulhilmi (2016) Wearable sensors for personalized health. [Final Year Project] (Submitted)
A/L Shanmugam, Kevindran (2016) Modification of Asphalt Binder by Incorporating Coconut Shell Powder. [Final Year Project] (Submitted)
Zakaria, Ahmad Syafiq (2016) DESIGN AND PERFORMANCE ASSESSMENT OF A PHOTO-FENTON REACTOR WITH IMMOBILIZATION OF FE ON NAFION MEMBRANE; FOR REMOVAL OF PAHs FROM THE SUPPLY WATER. [Final Year Project] (Submitted)
Tan , Jor Yi (2016) Comparative FE Study between MAT159 and MAT072R3 for Concrete Behaviour Modelling under Quasi-static Loading in LS-DYNA. [Final Year Project] (Submitted)
a/p Gurbachan Singh, Veerinder Kaur (2016) Coir Rolls as Temporary Measure For Wave Attenuation. [Final Year Project] (Submitted)
Hla Myint, Kyaw Thiha (2016) Structural Integrity Re-Use Assessment for Fixed Structures. [Final Year Project] (Submitted)
SHERN, LEOW YENN (2016) Modelling of coastal flooding due to the dissolved CO2 in the ocean emitted from oil refinery. [Final Year Project] (Submitted)
SAMSUDIN, NUR SHAHIRA (2016) Investigation on Shortening of Post Closure Duration in a Hazardous Waste Landfill. [Final Year Project] (Submitted)
Elwin , Lau Kieng Wui (2016) Air-Sea Flux Interaction Of CO2 Concentration Due To Oil And Gas Industry And Climate Change In Malaysia. [Final Year Project] (Submitted)
Lieng , Kee Wong (2016) PARAMETRIC STUDY OF REINFORCED CONCRETE BEAM SUBJECTED TO IMPACT LOADING USING FINITE ELEMENT ANALYSIS. [Final Year Project] (Submitted)
Abu Bakar, Fatin Amirah (2016) Prediction of Pore Water-Pressure Using Multiple Linear Regression (MLR). [Final Year Project] (Submitted)
Gan , Kai Han (2016) Wave Transmission Characteristics of the Rapidly Installed Modular Floating Breakwaters. [Final Year Project] (Submitted)
Haron, Nur Atikah (2016) Behaviour of Electrical Resistivity with Soil Strength Parameters by Varying the Particle Size Proportion for Mixed Sand and Silt Samples. [Final Year Project] (Submitted)
Midir, Victor (2016) Study on corrosion of offshore jacket platform. [Final Year Project] (Submitted)
Hamidi, Sheeril Hafiza (2016) FLY ASH BASED GEOPOLYMER MORTAR(FRESH & HARDENED PROPERTIES). [Final Year Project] (Submitted)
Razali, Rodiah (2016) Removal of Synthetic Dyes By Adsorption Using Treated Oil Palm Waste Biomass. [Final Year Project] (Submitted)
LEOW , WEI NENG (2016) DECENTRALISED SEWAGE TREATMENT USING ANAEROBIC BAFFLED HORIZONTAL WETLAND SYSTEM. [Final Year Project] (Submitted)
Mohd Nordin, Muhamad Nabil (2016) Parametric Study on Spectral Fatigue Analysis of Offshore Jacket Platform X with Software SESAM. [Final Year Project] (Submitted)
Gabriel , Wong Siong Tung (2016) Integrated Pilot Plant for a Complete Decentralized Sewage Treatment. [Final Year Project] (Submitted)
Sareekam, Napon (2016) Simulated Offshore Structure Monitoring System Using Global Positioning System (GPS) and Accelerometer. [Final Year Project] (Submitted)
Nordin, Idayu (2016) The Use Of Algae Wastes As Bio Adsorbent For Heavy Metals Removal. [Final Year Project] (Submitted)
Ramlan, Farah Asyikin (2016) Outdoor Surveillance Camera Coverage For Process Plant. [Final Year Project] (Submitted)
Kamaruddin, Muhammad Khairulsyamim (2016) Iris Recognition As Biometric Authentication. [Final Year Project] (Submitted)
Baskaran, Prasanth Raj (2016) Experimental Study on Effects of Welding Parameters on Microstructure & Mechanical Properties of AA6061-T6 Material Joined by Friction Stir Welding (FSW). [Final Year Project] (Submitted)
Law , Tzee Sien (2016) Lean Process Improvement on Local Hospitals. [Final Year Project] (Submitted)
Zulkarnain, Ahmad Fahim (2016) Optimize Build Orientation for 3D Printing to Minimize Build Time and Support Structure. [Final Year Project] (Submitted)
Hamada, Dah (2016) Drive system design for personal electric vehicle (PEV). [Final Year Project] (Submitted)
Saharuddin, Muhammad Dzulhafiz (2016) THE EFFECTIVENESS OF ENTERPRISE RESOURCE PLANNING (ERP) IN OIL & GAS AND CONSTRUCTION INDUSTRY. [Final Year Project] (Submitted)
SHAHRUDIN, ALIA FARHANA (2016) Experimental Study on Dynamic Responses of Tension Leg Platform (TLP) Subjected to Short Crested Waves with Current. [Final Year Project] (Submitted)
Amir Johari, Muhammad Amir Faizal (2016) Laboratory Study on Slide Triggered Tsunami. [Final Year Project] (Submitted)
A/P Manoharan, Lachmi Sri (2016) Use of Scrap Marine Pipelines as Submerged Breakwaters. [Final Year Project] (Submitted)
Amir, Benni (2016) A STUDY ON STRUCTURAL INTEGRITY OF CORRODED OFFSHORE FIXED PLATFORM UTILIZING PUSHOVER ANALYSIS. [Final Year Project] (Submitted)
CHEAH , YIT HOONG (2016) Properties of Nano Silica Modified High Permeable Concrete. [Final Year Project] (Submitted)
Min Yang, Nicky Tay (2016) Experimental Study on Shear Interaction of Carbon Fibre Reinforced Polymer (CFRP) and Transverse Steel Stirrups on Shear Strengthened RC Beams. [Final Year Project] (Submitted)
Salleh, Siti Fatimah Zahraa’ (2016) Performance of Engineered Cementitious Composite (ECC) Substituting Coconut Fiber. [Final Year Project] (Submitted)
Edmund, Jonathan Emmanuel (2016) Numerical Analysis of Crack Failure in Reinforced Thermoplastic Pipe (RTP). [Final Year Project] (Submitted)
Abu Bakar, Nurin (2016) Parking Management System in UTP campus. [Final Year Project] (Submitted)
HONG, KEE RI (2016) Structural Integrity of Offshore Platform Duyong (PMO), Kinabalu(SBO) and Tukau (SKO) Under Seismic Loadings in Malaysian Offshore. [Final Year Project] (Submitted)
Shamsuddin, Nurul Naqila (2016) PERFORMANCE DESIGN OF BUBBLE-INCORPORATED SLAB. [Final Year Project] (Submitted)
A/P AMARJIT SINGH, SHERLINAJIT KAUR (2016) Development of Preliminary Mercury Management Guideline in Platform Decommissioning for Peninsular Malaysia Operations. [Final Year Project] (Submitted)
CHUI , PING YEO (2016) STRENGTH PERFORMANCE ANALYSIS OF AGED STEEL CATENARY RISERS. [Final Year Project] (Submitted)
Pangestu, Ligar Anggara (2016) EXPERIMENTAL INVESTIGATION OF HYDRODYNAMIC COEFFICIENTS ON VERTICAL CYLINDER SUBJECTED TO SHORT-CRESTED WAVES. [Final Year Project] (Submitted)
WAN MOHD NOOR, WAN NURAFIFAH HANI (2016) EXPERIMENTATION OF COMPOSITE PATCH REPAIR FOR CORRODED TUBULAR MEMBER. [Final Year Project] (Submitted)
CHONG , QI WEN (2016) Treatment of Synthetic Waste Water by Vegetal Biopolymer as Natural Coagulant: A Comparison Study with Ferric Chloride. [Final Year Project] (Submitted)
KHAW , HAN PING (2016) Characterization and Treatment of River Water with biopolymer: A Comparison Study with Alum. [Final Year Project] (Submitted)
Chen , Kar Weng (2016) Enhancement Of Sludge Anaerobic Digestability By Fenton And Photo-Fenton Pretreatments. [Final Year Project] (Submitted)
Mat Salleh, Nur Syuhaidah (2016) SCALING RATIO EFFECTS ON THE PREDICTION OF THE DYNAMIC MOTIONS OF SEMI-SUBMERSIBLE PLATFORMS PROTOTYPE IN THE VIEW OF TESTING FACILITIES LIMITATIONS. [Final Year Project] (Submitted)
Salim, Ahmad Tirmidzi Zarfan (2016) THE STUDY OF TIME AND COST OVERRUN IN THE CONSTRUCTION AND OIL AND GAS INDUSTRY. [Final Year Project] (Submitted)
Idrus, Natasha (2016) Application of In-Vessel Composting for Yard Waste Produced in Cameron Highlands. [Final Year Project] (Submitted)
Ahmad Mardzuki, Mohd Nazri (2016) Simulated Offshore Platform Structural Monitoring System Using Real-Time Kinematics Global Positioning System. [Final Year Project] (Submitted)
Mohd Zaini, Fatin Norlyana (2016) THE STUDY OF THE EFFECTIVENESS OF SAFETY PRECAUTIONS IN CONSTRUCTION PROJECT. [Final Year Project] (Submitted)
Mohd Nordzi, Nur Amirah (2016) Experimental Study on Inertia Coefficient of Fixed Vertical Cylinder Subjected to Short Crested Waves. [Final Year Project] (Submitted)
Adrian , Teh Kim Yoon (2016) Construction of Bored Piles In Limestone Area and Friction & Point Bearing Capacity Based On Field Test (Osterberg Test). [Final Year Project] (Submitted)
ARANG, JANNET BULAN (2016) SCALING RATIO EFFECTS ON THE PREDICTION OF DYNAMIC MOTION OF TENSION LEG PLATFORM PROTOTYPE IN THE VIEW OF TESTING FACILITIES LIMITATIONS. [Final Year Project] (Submitted)
Chong , Kah Hin (2016) Optimizing the Performance of Wave Energy Converter for Power Generation. [Final Year Project]
Su , Wen Xin (2016) Biochar Enhanced Starch (BES) Gel. [Final Year Project]
Che Husain, Nurul Hazwani (2016) Separation and Fractionation of Phenolic Compound (Gallic Acid) from Selected Herbs and β-Glucans from Oat. [Final Year Project]
Yusof, Ain Munirah (2016) Optimization of Ethanol Production from Banana via Fermentation of Pre-treated Hydrolysate using Response Surface Methodology (RSM). [Final Year Project]
Shafie, Siti Nur Alwani (2016) Development of Polycarbonate-Silica Mixed Matrix Membrane for CO2/CH4 Separation. [Final Year Project]
Shahrom, Marsha Daeyana (2016) An Investigation on Heavy Metal Concentration in Tree Barks at Areas Affected by the 2015 Haze in Malaysia. [Final Year Project]
Hamid, Muhammd Faris (2016) Simulation Studies of Biomass Gasification System. [Final Year Project]
Han , Fon Yee (2016) Intrinsic Transesterification Rate of Vegetable Oils. [Final Year Project]
Karar Balla, Ola Babiker (2016) Modeling of Equilibrium Water Condensation in Natural Gas Flowing Through Joule Thompson Valve. [Final Year Project]
Terry , Teh Kim Leong (2016) Investigation of Banana Biomass for Low Cost Biofuel Production. [Final Year Project]
Hang , Li Meng (2016) Performance of Linear Model Predictive Control (MPC) On the Control of a Nonlinear Continuous Stirred Tank Reactor (CSTR). [Final Year Project]
OBAID BA TIS, MANSOOR ABDULLAH (2016) Adsorption Characteristics of Benzene in Surface Modified Montmorillonite. [Final Year Project]
Mohamad Amir, Muhamad Amirul Luttfi (2016) An Investigation on Fibre Loading and Dimension towards Moisture Absorption in Biocomposites. [Final Year Project]
Lee , Weng Soon (2016) CFD Simulation Of The Influence Of Humidity On Explosive Behaviour of Aluminium Nanoparticle. [Final Year Project]
Nazily, Siti Ameera Nadya (2016) Immobilization of Chlorella vulgaris for Palm Oil Mill Effluent(POME) Treatment and Heavy Metals Removal. [Final Year Project]
Wan Abdul Halim, Wan Maizatul Fathirah (2016) Synthesis of Fly Ash-Based Geopolymers Using Various Alkali Activators for Dye Removal. [Final Year Project]
Abdul Haleem, Azreennisa (2016) Optimisation of Biomass Supply Chain Management Using P-Graph Application in FELDA Jengka. [Final Year Project]
Mohamed@Mohamad, Nurul’ Ain (2016) Total Sites Analysis (TSA) Implementation in Sahabat Oil Products, Lahad Datu, Sabah, Malaysia. [Final Year Project]
A/L Karuppiah, Yuveneshraj (2016) Diagnosis of Poor Control Loop Performance: Investigate Support Vector Regression Method on Stiction Quantification for Control Valve Nonlinearity. [Final Year Project]
N. Narayanasamy, Anand (2016) Diagnosis of Poor Control Loop Performance: Development of a Model Based Compensation Algorithm for Control Valve Stiction Nonlinearity. [Final Year Project]
A/L M. Elanjaran, Yuwerajen Mohan (2016) Carbon Dioxide Dry Reforming over Molybdenum Oxide Supported Nickel-Cerium Catalyst To Produce Synthesis Gas. [Final Year Project]
Tangavaloo, Vishantini (2016) Synthesis and Characterization of Thermally Treated HKUST-1 Metal Organic Framework for Carbon Dioxide Capture. [Final Year Project]
A/P Ramesh, Lavenia (2016) Utilization of Waste Eggshell as Potential Adsorbent for Removal of Oil and Grease from Water. [Final Year Project]
Ganesan, Thipashini (2016) Sorption and Desorption Studies of Lead(II) Using Sawdust as Potential New Sorbent. [Final Year Project]
Eissa, Eissa Mubarak (2016) Selectivity Modeling Analysis of Natural Gas Binary Components via Adsorption on 5A Zeolites. [Final Year Project]
BALABID, AHMED MOHAMMED OBAID (2016) Selectivity Analysis for Simulated Natural Gas Mixtures Separation via Adsorption on Zeolite 13 X as Solid Desiccants. [Final Year Project]
Panneerchelvam, Hemala (2016) Study on the Flow Dynamics of Nitrogen and Hydrogen Gases in a Monolithic Microchannel. [Final Year Project]
Azhari, Mohd Nur Hanif Aiman (2016) Effect of Reaction Process Parameters on Photocatalytic CO2 Reduction. [Final Year Project]
Somasundaram, Shoban Raj (2016) Study and Prediction of Ionic Liquid Viscosity Via Means of Quantitative Structure-Property Relationship. [Final Year Project]
Manoharan, Avinash Kumar (2016) Feasibility of Using Ionic Liquids as an Environment Friendly Corrosion Inhibitor of Carbon Steel in the Saline Solution. [Final Year Project]
Ang , Yee Ying (2016) CFD Simulation of Two-Phase Separation in a Liquid Flash Drum. [Final Year Project]
Clarence , Yong Yee Hern (2016) Polymer-Surfactant Formulation Design Optimization For CO2 Mobility Control For Enhanced Oil Recovery Applications. [Final Year Project]
A/P Raman, Nanthini (2016) Feasibility of Using Ionic Liquids as an Environment Friendly Corrosion Inhibitor of Carbon Steel in the Acidic Solution. [Final Year Project]
a/l Malaichelvan, Arevind Chelvan (2016) Influence of alkali activator concentration on synthesis of high calcium fly ash geopolymer. [Final Year Project]
A/L P.Vellen, Nithianantham (2016) Closed Loop Identification of Distillation Column. [Final Year Project]
Wong , Theen Meng (2016) PVdF-HFP/Chitosan Polymer-blend Quasi-solid State Electrolyte for Dye-Sensitized Solar Cells Application. [Final Year Project]
LOO , MAN YEE (2016) Solid Fuels From Algae Residues By Biomass Densification. [Final Year Project]
Teh , Huey Ying (2016) Harvesting of Microalgae Biomass via Coagulation and Flocculation Process. [Final Year Project]
Tan , Yee Tong (2016) Synthesis of Low Transition Temperature Mixtures (LTTMs) From Natural Resources. [Final Year Project]
Goh , Wei Min (2016) SUPERCRITICAL EXTRACTION OF VALUE ADDED CHEMICAL FROM GAHARU. [Final Year Project]
A. Majid, Maizan Amani (2016) Droplet Impact Behaviour of Modified Geopolymer Solution on Urea Surface. [Final Year Project]
ALFATESH, MOHAMMED TAHER (2016) FLUX AND REJECTION OF SALTS BY USING COMMERCIAL NANOFILTRATION MEMBRANES. [Final Year Project]
Lidu @ Serirama, Seri Rahimah (2016) Retrofit Approach in Palm Oil Refining by Implementing Pinch Analysis (A Case Study at Sahabat Oil Products (SOP), Lahad Datu, Malaysia). [Final Year Project]
Mohd Yusoff, Muhamad Syazwan (2016) Propensity of Commercial Automotive Fuel for Boilover. [Final Year Project]
a/l Paramesura Rao, Satish Rao (2016) Study on Economic Evaluation of Different Techniques for CO2 Separation from Natural Gas. [Final Year Project]
NELSON , YANG SOON KIT (2016) EVALUATION OF MODIFIED KENT-EISENBERG MODEL TO PREDICT HYDROGEN SULPHIDE SOLUBILITY IN METHYLDIETHANOLAMINE. [Final Year Project]
Chan , Sin Wei (2016) Kinetic Studies on CO2 Capture using Rubber Seed Shell Activated Carbon. [Final Year Project]
Yau , Wing Tim (2016) Biodegradable Binder from Natural Resources for Biomass Densification. [Final Year Project]
Chai , Kah Sin (2016) Model-based Performance Analysis of Hydropurification Reactor. [Final Year Project]
Thennarasu, Thamarai (2016) Production of Biosurfactant From Pseudomonas Aeruginosa for Micellar Aggregates with Ionic Liquid. [Final Year Project]
Srinivasan, Suppulakshmi (2016) Thermogravimetric analysis (TGA) decomposition and morphological study of Empty Fruit Bunch (EFB) torrefied under N2, O2 and CO2 atmosphere. [Final Year Project]
Ting, Vennesa Johnny (2016) PVTSim Prediction of Hydrate Phase Equilibrium of a Modified Natural Gas Composition in Sabah Operation Sumandak-Bravo Field (SUPGB). [Final Year Project]
Md Saad, Luqman (2016) Prediction Model for the Toxicity of pyridinium Based Ionic Liquids Towards vibrio fischeri Bacteria Using QSAR Models. [Final Year Project]
Lee , Pei Ting (2016) Optimization of Supercritical CO2 Extraction of Essential Oil from Neem Leaves Using Response Surface Methodology. [Final Year Project]
Gwee , Yong Ling (2016) Study on the Interfacial Curvature of Oil-Water Two Phase System subjected to Polymeric Additives. [Final Year Project]
Cedric , Lemuel Lee (2016) A Study of Enriched CO2 on the Remediation of Heavy Metal Contaminated Soil Using Jatropha Curcas. [Final Year Project]
Teh , Weng Kean (2016) Removal of Heavy Metal Ions using Amine-Functionalized Mesoporous Adsorbent. [Final Year Project]
Ahmad Shobri, Alya Nabilah (2016) Synthesis and Characterization of Pyrrolidinium-based Ionic Liquid as A New Biodegradable Oil Dispersant. [Final Year Project]
Samsuri, Hairul Nazri (2016) Preparation and Characterization of Montmorillonite Modified Chitosan Nano-composites for Zinc Metal Removal. [Final Year Project]
Mohd Roslim, Mohd Iqbal (2016) Adsorption Mechanism of Chitosan/Polyvinyl Alcohol (PVA) Hydrogels in Wastewater Treatment. [Final Year Project]
Mohd Zaini, Mohammad Haniff (2016) Consequence Study of CO2 Droplet Leakage in Seawater using Computational Fluid Dynamic (CFD) Approach. [Final Year Project]
Rosli, Luqman Hakim Rosli (2016) Carbon dioxide removal from natural gas using dual layer-silica membrane on alumina support disk. [Final Year Project]
Che Jaafar, Nor Aini Aslah (2016) Modelling of Non-Equilibrium Water Condensation in Natural Gas Flowing Through Joule-Thomson Valve. [Final Year Project]
Hasan, Nur Liyana (2016) Direct Hydrogen Production via Methane Decomposition. [Final Year Project]
a/l Muniandy, Devendraa (2016) Thermophilic Aerobic Digestion of Food Waste to Pelletized Fertilizer. [Final Year Project]
Soon , Yung Wang (2016) Modeling and Simulation of Organic Rankine Cycle (ORC) for Power Generation. [Final Year Project]
Silvia , Maquina Alo (2016) Comparative Estimation of Stability of Gold Nanoparticles in Aqueous Solution by Spectrophotometric Absorbance and Zeta Potential Methods. [Final Year Project]
Ten , Joon Kit (2016) Ionic Liquid Mediated Biosynthesis of Gold Nanoparticles using Oil Palm Kernel Extract. [Final Year Project]
Rajasegaan, Sarasuwathi (2016) Model Predictive Control for Tracking. [Final Year Project]
Logambigai, Perichiappan (2016) Physicochemical Characterization of Lignin Recovered from Agriculture and Forestry Biomass. [Final Year Project]
Lim , Susin (2016) Study on the Dispersion Characteristics of Thermal Oil Based Nanofluids Using Different Techniques. [Final Year Project]
Nagasparan, Sivaneswaran (2016) Synthesis and Characterization of Metakaolin Acid-Based Geopolymer for Hydrogen Adsorption Study Using Fixed Bed Reactor. [Final Year Project]
Husni, Hasrul (2016) Utilization of Solid Biomass Waste (Oil Palm Frond) as Low-Cost Adsorbent for Janus Green B Dye Removal. [Final Year Project]
CHAN , JUN HAN (2016) Dispersion and Distribution of MCM-48 Fillers in Polyethersulfone Matrix for Hybrid Membrane Development. [Final Year Project]
Binti Nordin , Nurfaradine (2016) Palaeontology and Depositional Setting of Chert Member, Semanggol Formation, North Kedah. [Final Year Project] (Submitted)
Bin Omar, Muhamad Nizarul Idhafi (2016) Modeling of Seismic and Resistivity Responses during the Injection of CO2 in Sandstone Reservoir. [Final Year Project] (Submitted)
Bin Abdul Jalil, Irfan Azri (2016) Carbonate Sedimentology Of Gunung Kanthan In Chemor, Kinta Valley, Perak. [Final Year Project] (Submitted)
Marial Amom, James Matungbor (2016) Application of Acoustic Impedance Inversion to Evaluate the Pay Zone Distribution in Sepat Field, Malay Basin. [Final Year Project] (Submitted)
binti Jamaludin, Nur Farhana (2016) Exploration and Detection of sinkhole in Lahat, Perak with Emphasis on Electrical Resistivity. [Final Year Project] (Submitted)
bin Md. Nor, Mohamad Hanif (2016) Coal Petrology and Geochemistry of Upper Coal Zones and Lower Coal Zones of Nyalau Formation from Merit-Pila Coalfield. [Final Year Project] (Submitted)
BIN ABDUL MALIK, MUHAMMAD HAZMI (2016) Application of Seismic Geomorphology for Exploration: Example of Block PM318, Malay Basin. [Final Year Project] (Submitted)
bin Ash’ari, Norhalimi (2016) Petrology of Northeastern Part of Gunung Jerai. [Final Year Project] (Submitted)
Bin Abdul Rahman, Mohammad Rizal (2016) Geology and Economic Potential of Limestone in Gunung Rapat Area, Perak, Malaysia. [Final Year Project] (Submitted)
bt Suharto, Nur Shafiqah Athirah (2016) General Geology of Bukit Tinggi Area, Pahang with emphasis on Bukit Tinggi Fault Zone. [Final Year Project] (Submitted)
binti Syed Mansor, Sharifah Nurfarhana (2016) The Geology and Economic Potential of Gunung Terendum Area, Simpang Pulai. [Final Year Project] (Submitted)
Binti Osman Ash’ari, Nadia Ashikin (2016) 2D TO 3D RESISTIVITY IMAGING ON DETERMINIG THE VOLUME OF SINKHOLE : STUDY CASE IN KAMPAR. [Final Year Project] (Submitted)
Binti Nordin, Nurfaradine (2016) Palaeontology and Depositional Setting of Chert Member, Semanggol Formation, North Kedah. [Final Year Project] (Submitted)
Bin Mohd Mazlan, Muhammad Radziamir (2016) Tectono-Stratigraphic Model of East Face of Central Gunung Semanggol, Bukit Merah, Taiping, Perak. [Final Year Project] (Submitted)
BIN ABDUL MALIK, MUHAMMAD HAZMI (2016) Application of Seismic Geomorphology for Exploration: Example of Block PM318, Malay Basin. [Final Year Project] (Submitted)
Loo, Sheau Huey (2016) Integrated Static Reservoir Modeling of Yan’an Formation, X-area, Ordos Basin, China. [Final Year Project] (Submitted)
bin Md. Nor , Mohamad Hanif (2016) Coal Petrology and Geochemistry of Upper Coal Zones and Lower Coal Zones of Nyalau Formation from Merit-Pila Coalfield. [Final Year Project] (Submitted)
Binti Abdullah, Ashley Aisyah Yoong (2016) Application of Simultaneous Inversion Method To Predict The Lithology And Fluid Distribution in “X” Field, Malay Basin. [Final Year Project] (Submitted)
binti Azhar, Nur Afifah (2016) Semanggol Formation: Geological and Sedimentology Study of Kg. Jabi Area, Pokok Sena, Kedah. [Final Year Project] (Submitted)
Bin Roslan, Shazrul Hazwan (2016) Mineralogy and Geochemistry of Black Shale Outcrops at Batu Gajah, Perak. [Final Year Project] (Submitted)
bin Ahmad Shahran, Muhammad Saufi (2016) Structural Geology Of Semanggol Formation Emphasis on Gunung Semanggol, Perak Area. [Final Year Project] (Submitted)
Jing Hang, Eric Teng (2016) Geology and Sedimentology of Transect I – East Face, Central Gunung Semanggol, Bukit Merah, Perak. [Final Year Project] (Submitted)
Bin Saifulbahri, Ezzat Amirimran (2016) General Geology and Facies Characteristics of the Lambir Formation, Miri-Lambir, Sarawak, With Special Emphasis on Its Trace Fossil Contents. [Final Year Project] (Submitted)
Bin Mostaffa, Muhammad Iman (2016) Sedimentology of the Early Neogene Sarawak Basin (Onshore at Tatau Town to RumahSupitAkSeriang), Bintulu, Sarawak, Malaysia. [Final Year Project] (Submitted)
a/l Etiapan, Sivaraj (2016) A Comparison Study of Kinta Valley Limestone and Gomantong Limestone: Mineralogy and Economic Potentiality. [Final Year Project] (Submitted)
bin Ahmad Shahran, Muhammad Saufi (2016) Structural Geology Of Semanggol Formation Emphasis on Gunung Semanggol, Perak Area. [Final Year Project] (Submitted)
bin Rafiuddin, Mohammad Ashraf (2016) The Potential Tsunami Impact to Coastal Vegetation and Geological Landscape at Teluk Senangin, Lumut, Perak. [Final Year Project] (Submitted)
Shek Houng, Douglas Law (2016) Integrated Geophysical Study to Delineate Subsurface Structures in Seri Iskandar, Perak: The Kati Formation. [Final Year Project] (Submitted)
Binti Mohd Rosdi, Nadhirah (2016) Geochemical Characteristic of the Nyalau Formation from Merit-Pila Coal Field, Sarawak, Malaysia: Its Implications on Depositional Condition and Thermal Maturity. [Final Year Project] (Submitted)
A/P Subramaniam, Renuga Devi (2016) Seismic Modeling and Imaging for Complex Structures. [Final Year Project] (Submitted)
binti Abu Bakar, Nur Aimi Asyiqin (2016) General Geology of Kijal area in Terengganu with emphasize on Characterization of Carbonaceous Slate. [Final Year Project] (Submitted)
Bin Azhar, Muhammad Zulhelmi (2016) Source and Trap Elements of Petroleum System Analogue Study, Along Cameron Highland - Gua Musang Road. [Final Year Project] (Submitted)
Binti Mohd Azli, Nadiah (2016) Understanding The Geology of Bukit Tinggi, Pahang Through Geophysical Study. [Final Year Project] (Submitted)
Bin Hamzah, Hazeet Fikry (2016) Sedimentology and Depositional Environment of the Semantan Formation, Central Pahang. [Final Year Project] (Submitted)
Ngui, Jia Qi (2016) Sedimentology and Stratigraphy of the Early Neogene Sarawak Basin (Tatau-Bintulu Road), Sarawak, Malaysia. [Final Year Project] (Submitted)
Cheong Heng, Sean Lee (2016) Microfacies and Diagenesis of Setul Formation, Pulau Langkawi. [Final Year Project] (Submitted)
Ong , See Ching (2016) An Integrated Static Reservoir Modelling of Yan Chang formation, Ordos Basin, China. [Final Year Project] (Submitted)
Binti Abdullah, Ashley Aisyah Yoong (2016) Application of Simultaneous Inversion Method To Predict The Lithology And Fluid Distribution in “X” Field, Malay Basin. [Final Year Project] (Submitted)
Ooi, Wei Chian (2016) Geology & Geomechanics of Rhyolite, Lanchang, Pahang. [Final Year Project] (Submitted)
binti Mustapha, Jihan Rufaidah (2016) Geology of the Simpang Pulai area with emphasis on the stability of the northern cliff of Gunung Lanno, Kinta Valley. [Final Year Project] (Submitted)
Chow , Cai Wing (2016) Facies Discrimination Using Well Logs: Input For Seri Iskandar Geological Model. [Final Year Project] (Submitted)
a/l Sukhdev Singh, Sukhveender Singh (2016) The Potential Tsunami Impact to Coastal Vegetation and Geological Landscape in Segari, Lumut. [Final Year Project] (Submitted)
B Md Ghazali, Luqman Hakim (2016) Petrology of the Southeastern Part of the Gunung Jerai. [Final Year Project] (Submitted)
Tan Jianming , Nicholas (2016) TRACKING THE EXTENSION OF THE SEMANGGOL FORMATION USING REMOTE SENSING AND GIS TECHNIQUES. [Final Year Project] (Submitted)
Bin Wan Zurushdi , Ahmad Faiz Asyraf (2016) Sedimentology and Structural Geology of the Belaga Formation in Tatau, Sarawak. [Final Year Project] (Submitted)
Zulkarnain , Ahmad Farhan (2016) Petrophysical Properties and Reservoir Potential of Setul Formation, Langkawi Island. [Final Year Project] (Submitted)
A/P Subramaniam, Renuga Devi (2016) Seismic Modeling and Imaging for Complex Structures. [Final Year Project] (Submitted)
Jing Hang , Eric Teng (2016) Geology and Sedimentology of Transect I – East Face, Central Gunung Semanggol, Bukit Merah, Perak. [Final Year Project] (Submitted)
Bin Mostaffa, Muhammad Iman (2016) Sedimentology of the Early Neogene Sarawak Basin (Onshore at Tatau Town to RumahSupitAkSeriang), Bintulu, Sarawak, Malaysia. [Final Year Project] (Submitted)
Bin Roslan , Shazrul Hazwan (2016) Mineralogy and Geochemistry of Black Shale Outcrops at Batu Gajah, Perak. [Final Year Project] (Submitted)
Bin Omar, Muhamad Nizarul Idhafi (2016) Modeling of Seismic and Resistivity Responses during the Injection of CO2 in Sandstone Reservoir. [Final Year Project] (Submitted)
Chuah, Kor Sing (2016) Design of Excitation Signals for System Identification. [Final Year Project] (Submitted)
Febrianto, Rifqi Andi (2016) Process Simulation: Condensate Recovery and Stabilization in Associated Gas Field. [Final Year Project] (Submitted)
Tay, Yu Cong (2016) Investigation of Activated Carbon Synthesis Process and Processes Scale-up Simulation. [Final Year Project] (Submitted)
Choy, Cheng Kong (2016) NOVEL SYNTHESIS METHOD AND CHARACTERISATION OF MCM–48. [Final Year Project] (Submitted)
Goh, Kheng Seng (2016) Neural Network Modelling for Heat Exchanger. [Final Year Project] (Submitted)
Tan, Hua Nee (2016) Removal of Oxidized Paint using Ionic Liquid. [Final Year Project] (Submitted)
Hassin @ Hashim, Hasmiera (2016) Case Study: Optimisation of Federal Land Development Authority (FELDA) Sahabat Supply Chain Management Using P-graph Approach. [Final Year Project] (Submitted)
Azman, Khairul Imran (2016) DEVELOPMENT OF TRADE SECRET MODEL BASED ON OSHA PROCESS SAFETY MANAGEMENT REQUIREMENT. [Final Year Project] (Submitted)
Rosli, Muhammad Anisuddin (2016) The Hydrodeoxygenation of Non-Edible Oil for Green Diesel Production. [Final Year Project] (Submitted)
Lim, Wen Khai (2016) Synthesis of Humic Acid from UTP Vermicompost at Different C/N Ratio for Electricity Generation. [Final Year Project] (Submitted)
Lam, Jen Hui (2016) SURFACE MODIFIED NANOPARTICLES FOR EOR APPLICATIONS. [Final Year Project] (Submitted)
PUSPALINGAM, TARVINTHRANATH (2016) SEMI-CONTINUOUS CULTIVATION OF MICROALGAE USING COMPOST AS NUTRIENTS SOURCE FOR BIOMASS AND LIPID PRODUCTION. [Final Year Project] (Submitted)
Foo, Mei Yih (2016) Synthesis, Characterization of MOF-200/Graphene Oxide Composite For Static Adsorption Performance of Carbon Dioxide. [Final Year Project] (Submitted)
Elanchelian, Sahriven (2016) Fire and Explosion Reduction Analysis for Inherently Safer Design. [Final Year Project] (Submitted)
Lim, Lam Thye (2016) Hydrogen Adsorption Study using Functionalized Carbon Nanomaterials. [Final Year Project] (Submitted)
Omar Baslasl, Maher Saleh (2016) Methanol Production via CO2 Hydrogenation on Promoted Cu-based Catalyst. [Final Year Project] (Submitted)
Jaya Krishna, Thasarathan (2016) Extraction of Natural Dyes for the Application in Dye Sensitized Solar Cells (DSSCs). [Final Year Project] (Submitted)
Yim, See Cheng (2016) Extraction of Value-Added Products from Empty Fruit Bunch by Using Supercritical CO2 and Water as Co – Solvent. [Final Year Project] (Submitted)
Sadiq Azizur, Nor Iskandar (2016) FLUX AND SALT REJECTION OF RO MEMBRANES FOR UTILIZATION OF UNTAPPED WATER SOURCES. [Final Year Project] (Submitted)
Mohd Shapri, Nurul Syahirah (2016) The Effectiveness of Orange Peel in Removing Nickel in Wastewater. [Final Year Project] (Submitted)
Muhammad Fauzi, Fateh Hakeem (2016) The Production of 1, 3-Propanediol by Aqueous Phase Reforming of Glycerol over Nickel Based Catalyst. [Final Year Project] (Submitted)
Noor Zulkifli, Nur Amalina (2016) Estimation of Composition for Depropanizer Column Using Neural Network. [Final Year Project] (Submitted)
Chang, Louis Hou Wei (2016) Toxic Release Consequence Analysis for Inherently Safer Design. [Final Year Project] (Submitted)
Ganapathy, Sarvish (2016) Photocatalytic Degradation of Ionic Liquid in Wastewater under Visible Light. [Final Year Project] (Submitted)
Abdillah, Fauziah (2016) Removing Oil Impurity by Using Biomass Cell of Water Hyacinth. [Final Year Project] (Submitted)
KUEH, BENJAMIN WEI BIN (2016) Adsorption of Carbon Dioxide on Activated Carbon Derived from Asphaltene & Palm Kernel Shell Mixture. [Final Year Project] (Submitted)
Bong, Yin Chung (2016) Functionalisation of Halloysite Nanotube for the Development of Mixed Matrix Membrane. [Final Year Project] (Submitted)
Tan, Xun (2016) Fabrication of ZIF-8/Cellulose Acetate Mixed Matrix Membrane for CO2/CH4 Separation. [Final Year Project] (Submitted)
Palaniappan, Thenappan (2016) Synthesis and Characterisation of Sulphur-Functionalised Silica Nanocapsules for Mercury Removal Process. [Final Year Project] (Submitted)
Mohd Subri, Mohd Syauqi (2016) Development of Incident Investigation Model for Process Safety Management Compliance. [Final Year Project] (Submitted)
Lau, Jin Jie (2016) Effect of Ionic Liquid Pretreatment on the Thermal Degradation Kinetics of Oil Palm Biomass Based Composites. [Final Year Project] (Submitted)
HU, CHEE KIONG (2016) CFD Modeling of Trickle-Bed Reactors for Catalytic Hydropurification Processes. [Final Year Project] (Submitted)
Othman, Mohamed Azeem (2016) Studies of structural properties of char from intumescent coating. [Final Year Project] (Submitted)
Muosteut, Muosteufa (2016) Life Cycle Cost Comparison of Heat Recovery Steam Generator and Auxiliary Boiler. [Final Year Project] (Submitted)
Mohammed Saeed Dahi, Saleh (2016) Analytical Investigation of Precast Post-Tensioned Column of Ultra-High Performance Concrete (UHPC). [Final Year Project]
Soh, Jo Khuan (2016) Toxicology Model for Inherently Safer Design. [Final Year Project] (Submitted)