Browse by Type

Hesham, Muhammad Hadzmin (2022) Assessment of Coastal Vulnerability for Manjung Coast. [Final Year Project]

Mohd Zalaludin, Nasuha (2022) Boron Removal from Produced Water by Chemical Precipitation. [Final Year Project] (Submitted)

Mohd Imran, Mohammad Shazriel Hakimi (2022) Burst Stress Analysis of Large Green Hydrogen Offshore Pipeline Under Combined Loads. [Final Year Project] (Submitted)

AZLAN, FATIH SINAN (2022) FRAGILITY ANALSIS OF FIXED OFFSHORE PLATFORM IN MALAYSIA UNDER EARTHQUAKE EFFECT. [Final Year Project] (Submitted)

Mazli, Nur Syirin Syifaa (2022) Framework for Safety Control for Maintenance of Infrastructure Oil and Gas Project Using BIM. [Final Year Project] (Submitted)

Zhen Wei, Yu (2022) Comparison on the Mechanical Properties of Wearing Course Materials between JKR & LLM Specification. [Final Year Project] (Submitted)

Pei En, Yuen (2022) Evaluate Health and Safety Improvement through BIM Adoption in Building Construction Projects. [Final Year Project] (Submitted)

Sharuzaman, Safea Diyana (2022) Geomechanical Properties of Sandstones of Semantan Formation in Jerantut, Pahang and Gua Musang, Kelantan. [Final Year Project] (Submitted)

Hazizi, Nur Haziqah (2022) Geomechanical Properties of Mudstone of Semantan Formation in Gua Musang, Kelantan and Teriang Bera, Pahang. [Final Year Project] (Submitted)

ADNAN, MUHAMMAD AZRUL (2022) IMPACT OF HOUSEBOAT WASTEWATER ON REMOVAL OF ORGANICS FROM SMALL SEWAGE TREATMENT SYSTEM (SSTS) AT TASIK TEMENGGOR, GERIK, PERAK. [Final Year Project] (Submitted)

Husain, Amy Izzati (2022) Impact of Houseboats Wastewater Discharge on Performance of Small Sewage Treatment System (SSTS) in Removing Nutrient at Temenggor Lake. [Final Year Project] (Submitted)

Mohd Ariffin, Nur Izzati Alya (2022) Investigating Mechanical Properties of Reclaimed Asphalt Pavement Rejuvenated with Rubber Seed Oil. [Final Year Project] (Submitted)

Suliaman, Intan Safwanah (2022) Non-Revenue Water (NRW): Strategy on Reducing and Managing Water Losses in Johor. [Final Year Project] (Submitted)

Kai Chuen, Fong (2022) Numerical Study of Nonlinear Wave Groups In Shallow Water. [Final Year Project] (Submitted)

Azlan, Dayang Dania Dayana (2022) Numerical Study Of The Effect Of Spectral Shape On Wave Breaking. [Final Year Project] (Submitted)

Mohd Saleh, Nur Amira Nabilah (2022) Offshore Kinetic Energy Potential of Peninsular Malaysia by Using Hybrid Site Selection Method. [Final Year Project] (Submitted)

Abdul Razak, Muhammad Zulfaqar (2022) Push Out Test for Concrete Filled Steel Tubular Using Different Strengths of Ultra High Perfomance Concrete. [Final Year Project] (Submitted)

PARAMA GIRI, YAJISH GIRI (2022) PROPERTIES OF RUBBERISED GEOPOLYMER CONCRETE. [Final Year Project] (Submitted)

Fakhri Nizar, Muhammad Syahid (2022) Repurpose Waste Coal from Power Plant as A Subgrade Material. [Final Year Project] (Submitted)

Mohd Raihan, Afifah Nur Dina (2022) Smart rainwater harvesting for traditional housing in Malaysia using BIM. [Final Year Project] (Submitted)

Razali, Nur Diana Natasya (2022) Surface Settlement caused by Pipe Jacking Works crossing KL-Seremban Highway. [Final Year Project] (Submitted)

JIE LIN, BEH (2022) TECHNO-ECONOMIC ASSESSMENT OF HYDROKINETIC TURBINE (HKT) APPLICATION IN MALAYSIA. [Final Year Project] (Submitted)

Roslan, Eriza Najwa (2022) The Assessment of Stormwater Management and Drainage Master Plan: Sepang, Malaysia and Surakarta, Indonesia. [Final Year Project] (Submitted)

Sui Siang, Ng (2022) The Bonding Behaviour Between UHPC and Concrete Filled Steel Tubular with Different a/d Ratios and Shapes. [Final Year Project] (Submitted)

Azhar, Ahmad Amin Hakim (2022) The Effect of Bonded Length of NSM-CFRP Sheets on The Performance of Shear-Strengthened RC Beams. [Final Year Project] (Submitted)

Calvin, Woon (2022) The Effects of Socio-demographic Characteristics and Activity-Travel BehaviourChange on Online Activity Patterns during the Pandemic. [Final Year Project] (Submitted)

YANG LEE, CHEE (2022) THE EFFECTS OF TRAVEL BEHAVIOUR CHANGE ON ONLINE ACTIVITY PATTERNS DURING THE COVID19 PANDEMIC. [Final Year Project] (Unpublished)

MOHD SUKRI, MOHAMAD SYAHMI AIMAN (2022) ULTIMATE STRENGTH OF PLATES WITH OPENINGS UNDER AXIAL AND OUT-OF-PLANE LOADS. [Final Year Project] (Submitted)

Tan Ji Sin, Joanne (2022) A Web-based Seri Iskandar Mart Tracker. [Final Year Project] (Submitted)

Mohd Hafiz Mohan, Mohamad Arief Hud (2022) A Skateboard Cruising Application using Model–View–Viewmodel (MVVM) Architecture. [Final Year Project] (Submitted)

ABD RASHID, MUHAMMAD NUR AZRI (2022) ALLURING LEARNING ON COMPUTER COMPONENT MODULE USING AUGMENTED REALITY. [Final Year Project] (Submitted)

Thong Tsin Tet, Norard (2022) ANIMAL TRACKING SYSTEM WITH LORA. [Final Year Project] (Submitted)

HISYAM, MUHAMMAD DANISH (2022) ANOMALY DETECTION IN PALM OIL TREE USING OBJECT DETECTION. [Final Year Project] (Submitted)

Mohd Hameran, Nurin Hannani (2022) Application for Stutter Disability Using Machine Learning. [Final Year Project] (Submitted)

ABDULLAH, NUR LYDIA OH (2022) Artificial Intelligence Matching Algorithm with UTP Final Year Project Students and Advisors Matching as Test Case. [Final Year Project] (Submitted)

Mohd Nor, Ismail (2022) Blockchain-based Raw Goods Management System. [Final Year Project] (Submitted)

Saravanakumar, Dashineshwar (2022) Building Automation System (BAS). [Final Year Project] (Submitted)

ZULHAIDI, ZULHAFIY (2022) BUY, SELL, AND RENT APPLICATION WITH OCR FEATURE. [Final Year Project] (Submitted)

Abd Wahid, Ainuddin E-man (2022) Car Coolant Supervision System (Super-CC) Powered by Internet Of Things (IOT). [Final Year Project] (Submitted)

Jalaludin, Muhammad Nor Azmeerudin (2022) CARWAN: Ridesharing Mobile Application for Student. [Final Year Project] (Submitted)

Maiks, Jason (2022) Churn Analysis for Telco Using Python. [Final Year Project] (Submitted)

Ridzuan, Jasmin Ixora (2022) Collaborative Scheduling for Self-Service Laundry Facility. [Final Year Project] (Submitted)

Huey Yee, Yew (2022) CUTCUTSALON CUSTOMER RELATIONSHIP MANAGEMENT SYSTEM WEBSITE DEVELOPMENT. [Final Year Project] (Submitted)

Fairuz, Muhammad Irfan (2022) Cybersecurity Anomaly Detection using Power BI. [Final Year Project] (Submitted)

Ahmad Zul Kamal, Muhammad Nur Afnan (2022) Detection of Fake Reviews through Machine Learning on Online Shopping Portals. [Final Year Project] (Submitted)

Zainul Rashid, Siti Nor Maryam (2022) Design of Plantation Management System. [Final Year Project] (Submitted)

Sujang Karing, Darryl (2022) Detection of Fraud and Non-Fraud Transaction using Machine Learning Algorithm. [Final Year Project] (Submitted)

Abdul Kamal, Nur Ashsyafeera Adeeba (2022) Development of Web Application for Earth-Friendly Alternatives for Used Clothes. [Final Year Project] (Submitted)

Mustafa, Zulhisyam (2022) Development of Environmental Complaint Management System. [Final Year Project] (Submitted)

Md Zamri, Amirul Hakim (2022) Driving Simulator Virtual Reality Game. [Final Year Project] (Submitted)

SINGH, HARSUKHPAL (2022) DVAW – DOMESTIC VIOLENCE ASSISTANCE FOR WOMEN. [Final Year Project] (Submitted)

Muhd Zaaim, Nur Aisyah (2022) E-Commerce Technology Tools. [Final Year Project] (Submitted)

Jamaluddin, Johann (2022) Electronic Voting System using Blockchain. [Final Year Project] (Submitted)

Mohamad Fauzi, Muhammad Zamir (2022) Employee Turnover Prediction for Manufacturing Company with Data Visualization. [Final Year Project] (Submitted)

Azmi Raif, Mohammad Danial (2022) Face Recognition Attendance System for Organizations with Massive No. of Workers. [Final Year Project] (Submitted)

BZaki, Imanul ‘Aqilah (2022) Failure Model Prediction Using Machine Learning Techniques. [Final Year Project] (Submitted)

Zolkifli, Nur Anissa (2022) Forecasting Corrosion Rate on Pipeline using Artificial Neural Network. [Final Year Project] (Submitted)

Imeran, Yasmin Hazwani (2022) Forecasting Electricity Energy Consumption. [Final Year Project] (Submitted)

Abd Razak, Farzana Athirah (2022) Forecasting Torque & Drag Values for PETRONAS Carigali Sdn Bhd (PCSB ) Oil Wells Prediction Using Long Short-Term Memory (LSTM). [Final Year Project] (Submitted)

Norazli @ Norizan, Nursyafinas (2022) Forecasting Torque and Drag for Oil Wells Prediction using Variation of Decision Tree Algorithm. [Final Year Project] (Submitted)

Fujikawa, Yuya (2022) Fraudulent transaction detection on online platforms. [Final Year Project] (Submitted)

Abdul Rashid Tang, Abdul Raziq (2022) GAS TURBINE AR: Developing an Augmented Reality Mobile Application and Digital Content for Gas Turbine. [Final Year Project] (Submitted)

ZAMHURI, ZAM IZZATTY QAISARA (2022) GOLF TOURNAMENT REGISTRATION & SCORING MANAGEMENT E-SYSTEM. [Final Year Project] (Submitted)

Padil, Muhammad Syahrul Amry Ansary (2022) Grammarly in Malay Text : Bahasa Melayu Spell Checker Using Long-Short Term Memory Algorithm. [Final Year Project] (Submitted)

Mohd Amin, Nurrul Amiera (2022) IMPROVEMENT OF PLANT MONITORING USING INTERNET OF THINGS (IOT). [Final Year Project] (Submitted)

HAZMINUDDIN, MUHAMMAD HARDY HADZREN (2022) Informative Hiking App with GPS Tracker Alert System. [Final Year Project] (Submitted)

ZAILANI, NUR AZYYATI (2022) KITARECYCLE: A MOBILE APPLICATIONS SYSTEM FOR RECYCLING. [Final Year Project] (Submitted)

bIdris, Nordiana (2022) Learning Modules Application for Cybersecurity. [Final Year Project] (Submitted)

Rohaizad, Muhammad Muqsit Mustaqim (2022) LibAid: A Library Mobile Application. [Final Year Project] (Submitted)

Aminudin, Nurul Iman (2022) Memorization Progress Tracking Dashboard. [Final Year Project] (Submitted)

Mustafa, Nur Mifzal (2022) MOBILE APPLICATION DEVELOPMENT FOR PLAYBOOK. [Final Year Project] (Submitted)

Mohd, Ummu Sulaim (2022) Mobile Application Development for Synchronous and Asynchronous AC Motor. [Final Year Project] (Submitted)

Fatlly, Ratna Raffyra (2022) Mobile AR Open Collection Navigation for Information Resource Centre (IRC), UTP. [Final Year Project] (Submitted)

Ariffin, Naufal A’riff (2022) MOBILE ATTENDANCE APPLICATION FOR UTP STUDENTS. [Final Year Project] (Submitted)

Ibni Hajar, Fatin Camelia (2022) Monitoring and Prediction of International Student Visa Problem in UTP using Visual Dashboard and Random Forest. [Final Year Project] (Submitted)

Mohd Fadil, Muhammad Syafiq (2022) MoodLift – A Mobile Application for Mental Health. [Final Year Project] (Submitted)

Norseberi, Nurul Syazana (2022) M-Uconvo : Universiti Teknologi PETRONAS Convocation Management Web Application. [Final Year Project] (Submitted)

Sundararajamoorthy, Diviya (2022) Multi-Door Remote Controlled System. [Final Year Project] (Submitted)

NAZIMUDDIN, NAUFAL NUQMAN (2022) MULTIPLE MODE CONTROLLING SYSTEM FOR ROBOTIC CAR. [Final Year Project] (Submitted)

ROSLAN, MOHAMMAD SYAQIL (2022) MUSIC BASED SOCIAL MEDIA APPLICATION WITH NO POSSIBLE COMPARING FEATURES. [Final Year Project] (Submitted)

ABDUL AZIZ, MUHAMMAD TASNIM (2022) MyPathway: STUDENT ONBOARDING MOBILE APPLICATION. [Final Year Project] (Submitted)

Hashim, Siti Sarah (2022) On-Demand Professional Services Hiring App. [Final Year Project] (Submitted)

Zulaskha, Ziyad Fauzan (2022) Online Pharmaceutical Verification Shopping. [Final Year Project] (Submitted)

Abu Bakar, Abu Amirul Rafiq (2022) ONLINE STAFF ATTENDANCE APPLICATION. [Final Year Project] (Submitted)

RAVINDER KUMAR, KARISHMA SHARMA (2022) PARKSPOT: THE DEVELOPMENT OF MOBILE APPLICATION FOR SMART VEHICLE PARKING SYSTEM AT UNIVERSITY CAMPUS FOR STUDENTS. [Final Year Project] (Submitted)

Sabri, Nur Aaniq Shameeff (2022) Perimeter Intrusion Detection Alert for University Safety (PIDA) Powered by Internet Of Things (IoT). [Final Year Project] (Submitted)

Megat Amran, Puteri Nur Aleeza (2022) Prediction Model Of Floods Based On Historical Weather Dataset. [Final Year Project] (Submitted)

Omar, Nur Syazwana (2022) Production on Petroleum, Crude Oil, Natural Gas Plant (NGPL) And Other Liquids Dashboard. [Final Year Project] (Submitted)

Zainudin, Nor Azian Izati (2022) QR Pay Sanitary Napkin Vending Machine. [Final Year Project] (Submitted)

Mohd Ghazali, Fatima Zahra (2022) RIDER: Food Delivery Application for Students. [Final Year Project] (Submitted)

Ahamad Tajudin, Afifah (2022) Sales Prediction for Small Medium Enterprises (SME). [Final Year Project] (Submitted)

ABDUL MUTALIB, MUHAMMAD AIZAD AMIZ (2022) S-BIN: MOBILE APPLICATION FOR WASTE COLLECTION MANAGEMENT. [Final Year Project] (Submitted)

Alimunawar, Muhammad Afiqmunawar (2022) Service Quality System for Food and Beverage Industry (Billion). [Final Year Project] (Submitted)

Ganesh, Sannjanaa (2022) SECUREME: A SAFETY AND SECURITY COMPANION IN CAMPUS. [Final Year Project] (Submitted)

Arunagiri, Devanesh (2022) SMART SALES TRACKING APPLICATION. [Final Year Project] (Submitted)

Mohd Salleh, Muhammad Amir Imran (2022) Smart Street Lighting. [Final Year Project] (Submitted)

MOHAMAD RIZAL, MUHAMMAD AIMAN (2022) SMART WINDOW TECHNOLOGY USING LIGHT AND HUMIDITY SENSOR. [Final Year Project] (Submitted)

Jin Yee, Kwok (2022) Staff Annual Performance Appraisal System for Universities. [Final Year Project] (Submitted)

Khairuddin, Nur Hasyadina (2022) State Revenue Prediction Dashboard using Machine Learning Algorithm. [Final Year Project] (Submitted)

GUNALAN, THANESWARAN (2022) STOCK PREDICTION APP. [Final Year Project] (Submitted)

Mohamad Faizal, Affiq Aiman (2022) Student Online Attendance using PowerApps. [Final Year Project] (Submitted)

SHAMSUL HISHAM, ALIF AIMAN (2022) TAKING STUDENT ATTENDANCE USING FACIAL RECOGNITION. [Final Year Project] (Submitted)

Jamaludin, Norhakimi (2022) TraClo: Mobile Application of Men’s Garments Tracking with Data Visualization. [Final Year Project] (Submitted)

Venugopal, Thivnesh Kumar (2022) UFOS – UTP Food Ordering System. [Final Year Project] (Submitted)

Muniandy, Darrshan (2022) UTP Car Entry System (UCES). [Final Year Project] (Submitted)

Harbhajan Singh, Sandeep Singh (2022) UTP CAR TRANSPORTATION SYSTEM. [Final Year Project] (Submitted)

Haswani, Muhammad Hilman (2022) UTP Current News Application (Daily Petro). [Final Year Project] (Submitted)

Subramaiam, Harikesh Rau (2022) UTP Parking Tracking System (UPTS). [Final Year Project] (Submitted)

Vincent, Sean Anthony (2022) Virtual Reality – First Aid Simulator. [Final Year Project] (Submitted)

Azuwan, Aida Syafiqa (2022) Web-Based Creative Branding Material Supply. [Final Year Project] (Submitted)

Tan Yun Huang, Brandon (2022) Website Security Plug-In. [Final Year Project] (Submitted)

Hazri, Muhammad Harris Izuan (2022) An investigation on thermal performance of bio-based filler. [Final Year Project] (Submitted)

Mazmeelairam, Faris Aiman (2022) Comparative Analysis of Concrete BIM – based Residential Building Design in Malaysia: Towards Sustainable Development. [Final Year Project] (Submitted)

Othman, Muhammad Najib (2022) Effect of Wastewater Effluent from The Jetty’s Sewage Treatment Plant on Water Quality Around the Discharged Area. [Final Year Project] (Submitted)

Premchand, Saswen (2022) The effect of plunge depth on the fabrication of base and mono composites of AZ91 Using friction stir processing. [Final Year Project] (Submitted)

Kathiravan, Dinish Mutu (2022) Numerical Simulation Of Temperature Distribution During Friction Stir Processing (AA7075). [Final Year Project] (Submitted)

Razali, Muhamad Faezi (2022) Theoretical Investigation on The Shallow Ground Thermal Profiling Under Dry and Wet Weather Conditions. [Final Year Project] (Submitted)

HOCK KING, PAUL TING (2022) The Criticality of Warming up and Idling of Vehicle in Relation to Environment. [Final Year Project] (Submitted)

Zulkhafle, Zulaikha Hanis (2022) Mechanical Properties of Proppants Coated with Hybrid Nanostructure for Effective Hydraulic Fracturing. [Final Year Project] (Submitted)

Seong, Liew Chee (2022) Axial Hydro Turbine Blade Position Configuration for Optimum Hydropower Generation. [Final Year Project] (Submitted)

Iha @ Ajen, Aileen Julie (2022) Investigation on Fluid Structure Interaction of Composite Piping Conveying Fluid. [Final Year Project] (Submitted)

Zamri, Muhammad Syakir (2022) Evaluation of Salt Contaminations on Rust Stabilizing Formation. [Final Year Project] (Submitted)

Mohd Ridzuan, Muhammad Farhan Syauqi (2022) Effect of Turbulence Flow and Initial Particle Concentration on Jamming Probability through Coupled CFD-DEM Simulation. [Final Year Project] (Submitted)

Mohamad Ali, Ikhwan Hakim (2022) Characteristics of Dust Accumulation and Influence on PV Panel’s Efficiency. [Final Year Project] (Submitted)

Vijaya Kumar, Sathia Devi (2022) Residual Strength Prediction of Medium Toughness Pipe Elbow with Circumferentially Aligned Interacting Corrosion Defects Subjected to Internal Pressure. [Final Year Project] (Submitted)

Ahmad Soalahuddin Al-Thani, Adam Iman (2022) Effect of Types of Rubber on Thermal Properties of Magnetoactive Material. [Final Year Project] (Submitted)

Nordin, Muhammad Nur Azib (2022) Heat Transfer Enhancement of Thermoelectric Generator with Corrugated Surface Structure Using MWCNT Nanofluid. [Final Year Project] (Submitted)

Richard, Grace (2022) Study of Indoor Air Quality at Hostel Rooms in the Presence of Natural Ventilation. [Final Year Project] (Submitted)

Richard, Grace (2022) Study of Indoor Air Quality at Hostel Rooms in the Presence of Natural Ventilation. [Final Year Project] (Submitted)

Mohd Amran, Ahmad Firdaus (2022) Establishing Maintenance Planning for Solar Power Plant based on RAM Study. [Final Year Project] (Submitted)

Saad, Muhammad Syauqie (2022) Steam Properties Prediction in Steam Pipeline System using Microsoft EXCEL VBA. [Final Year Project] (Submitted)

Azme, Amirul Farhan (2022) Study On the Influence of Particle Content on Tensile Properties of Smart Rubber Composite. [Final Year Project] (Submitted)

Zulkifli, Mohammad Zulkhairi (2022) EDEM Simulation of Particles Path in a Vertical Cyclone Separator. [Final Year Project] (Submitted)

Mohd Asri, Nur Aqillah (2022) Artificial Neural Network of Flow Boiling Heat Transfer in Straight Pipe with Metal Foam. [Final Year Project] (Submitted)

Jothiahnantham, Dnesh (2022) Effect Of Hybridization Of Natural And Synthetic Fibers On Tensile Properties Of Composites: A Numerical Study. [Final Year Project] (Submitted)

DHARMANANDA, ROSHEN (2022) Open Hole Compression Performance of 3D Fiber Reinforced Composites. [Final Year Project] (Submitted)

Wong, Chen Hau (2022) Simulation of Data Centre Cooling using Altaire. [Final Year Project] (Submitted)

Hadhri, Hazwan Haziq (2022) Effects Of Amplitudes of External Excitation On Overall Vibration Response of a Piping System. [Final Year Project] (Submitted)

Mat Rodzi, Mohamad Syafik (2022) Force Extraction Analysis of an Ocean Kinetic Energy Converter. [Final Year Project] (Submitted)

Ahmad Asri, Nur Alya Qistina (2022) Effect of Hybrid Composition and Volume Fraction on Microstructure and Micro-hardness of Aluminum Titanium Carbide (Al/TiC) via Friction Stir Processing. [Final Year Project] (Submitted)

Mohamad Kamal, Siti Aisyaitun Fairuz (2022) Thermodynamic Analysis of Municipal Solid Waste Plasma Gasification Using Different Gasification Agents. [Final Year Project] (Submitted)

Abdul Rahman, Nur Aimy Aqilah (2022) Simulation of Lazy Steel Wave Riser Bend Radius – New Configuration of Shaped Steel Lazy Wave Riser (SLWR). [Final Year Project] (Submitted)

Tengku, Hillary (2022) Residual Strength Estimation of Medium Toughness Pipe Elbows with Longitudinally Aligned Interacting Corrosion Defects Subjected to Internal Pressure. [Final Year Project] (Submitted)

Zulkefli, Muhammad Aiman (2022) Evaluation and Testing of Exoskeleton to Assist in Pineapple Harvesting. [Final Year Project] (Submitted)

Sahari, Nurul Syahirah (2022) Finite Element Analysis of Belleville Spring Stiffness Behaviour. [Final Year Project] (Submitted)

Declan Lim, Hong Chwen (2022) Numerical Modelling of Cooling System for Battery Electric Vehicle Charging Station. [Final Year Project] (Submitted)

Suhazeli, Abdul Munir (2022) Analysis On The Performance Of Vibration Energy Harvester. [Final Year Project] (Submitted)

Mohd Bahrin, Nurinfaqihah (2022) Using Reliability Growth Model to Predict New Covid-19 Cases in Malaysia. [Final Year Project] (Submitted)

Asrul Hakim, Amira Nurhaliza (2022) Study On the Types of Petroleum-based Oil and Its Impact on Tensile Properties of MRE composite. [Final Year Project] (Submitted)

Hamdan, Muhammad Fadhli (2022) Studying the Effect of Natural Convection Heat Flow in Compound Parabolic Concentrators (CPC). [Final Year Project] (Submitted)

Azman, Muhammad Afif (2022) The Effects of Particle Size Of Zirconia-Alumina Powders On The Mechanical Properties of Thermal Barrier Coating Developed by High Velocity Oxy Fuel. [Final Year Project] (Submitted)

Muhammad Syahrul Goh, Muhammad Syafiq (2022) Thermophysical Behavior of the Hybrid Nanoparticles Reinforced Water-Based Drilling Fluid. [Final Year Project] (Submitted)

Junaidy, Idlan Akmal (2022) Study of Twisted MXENE/PVDF Nanofiber Yarn. [Final Year Project] (Submitted)

Mohd Amran, Muhammad Amirul Akid (2022) Mechanical Performance of Fibre Reinforced Lattice Structures under quasi-static axial compressive loads. [Final Year Project] (Submitted)

Arwinder Singh, Simran Kaur (2022) Geotechnical Characterization of Near Surface Materials in Tampin, Negeri Sembilan. [Final Year Project] (Submitted)

Norjaya, Muhammad Zulfadzli (2022) Rock Fabric Characterization Of Malaysian Shales. [Final Year Project] (Submitted)

Baharuddin, Jasmeen (2022) Petrophysical Evaluation on Pore Size Distribution of Reservoir Rocks in S field, Sabah Malaysia. [Final Year Project] (Submitted)

Raizal, Farah Ilyana (2022) Deeper Hydrocarbon Potential in the Central of Malay Basin, Block PM304, Cendor Field. [Final Year Project] (Submitted)

SHAHRULNIZAM, NURKHALISYA AQILA (2022) UNSUPERVISED MACHINE LEARNING IN SEISMIC INTERPRETATION APPROACH IN NORTH SARAWAK OFFSHORE PROSPECTIVITY. [Final Year Project] (Submitted)

NOR AZMAN, MUHAMMAD NUR MIRZA (2022) SEISMIC INTERPRETATION OF X – FIELD, CENTRAL LUCONIA. [Final Year Project] (Submitted)

Tumiran, Muhammad Izz Hakim (2022) Integrated Stratigraphic And Structural Interpretation Of The Fluvio-Marine To Deltaic Depositional Environment In Jambu Field, Malay Basin. [Final Year Project] (Submitted)

RAVEENDRAN, SIVA PRASAD (2022) DEVELOPMENT OF CONVOLUTIONAL NEURAL NETWORK ARCHITECTURE FOR SHALE CONTACT ANGLE PREDICTION. [Final Year Project] (Submitted)

LIEW, STACY PRIMUS (2022) IMPROVED UNDERSTANDING OF THE S-FIELD COMPARTMENTALIZATION BASED ON INTEGRATED WELL RESULTS AND NEW OCEAN BOTTOM NODES (OBN) SEISMIC DATA. [Final Year Project] (Submitted)

Mohd Nasir, Nur Yasmin (2022) An Online Restaurant Management System (District50). [Final Year Project] (Submitted)

Azman, Muhammad Idham (2022) An Online System for Parents Teacher Association (PTA) for School. [Final Year Project] (Submitted)

Razali, Muhamad Hamzah (2022) Web App for Tools Inventory Management with Predictive Categorization. [Final Year Project] (Submitted)

Mohamad Razip, Muhammad Yusuf (2022) DextArm: Advanced Robotics Control System Through AR/VR, 6DOF and Stereoscopy Vision. [Final Year Project] (Submitted)

Mazlan, Hilman Zafri (2022) FitAI: Home Workout Posture Analysis using Computer Vision. [Final Year Project] (Submitted)

Nazatul Akiya, Nur Shafiqah (2022) MyElection : An Election Voting Mobile Application. [Final Year Project] (Submitted)

ABDUL RAZAK, MUHAMMAD ASYRAF (2022) MYSEJAHTERA – RFID TAG READER. [Final Year Project] (Submitted)

Ruslan, Harris Sufian (2022) Online Book Store System. [Final Year Project] (Submitted)

ASRIN@HASRIN, NURUL SYAFIQAH (2022) PERSONALIZED TUTOR ONLINE SYSTEM. [Final Year Project] (Submitted)

Ismail, Muhammad Isyraf (2022) Riders and Restaurants Booking System. [Final Year Project] (Submitted)

Mohd Aizol Ikhwan Tey, Anis Amirah Aireen Tey (2022) The Development of EZ-Math Online Learning Platform for Secondary School Students. [Final Year Project] (Submitted)

Mohd Rashidy, Nur Syahirah (2022) The Development of UTP Directory Mobile Apps for New Students and Visitors. [Final Year Project] (Submitted)

Abdul Ghafur, Sahal (2022) Using Machine Learning to Analyze Procurement Data. [Final Year Project] (Submitted)

Faizal Hisham, Muhammad Haris Fahmi (2022) Workspace Ergonomics and Posture Effectiveness Detection using Computer Vision with Machine Learning Approach. [Final Year Project] (Submitted)

Suhaimi, Muhammad Izzat (2022) Assessment of a Potential Hybrid Offshore Renewable Energy Resources for Power Generation. [Final Year Project] (Submitted)

KUPUSAMY, ASHWYEIN (2022) AUTOMATED DEFECTS DETECTION MODEL FOR IBS ELEMENTS CONSIDERING IR 4.0 APPLICATION ENVIRONMENT. [Final Year Project] (Submitted)

RONNIE WISIL, RAFELLINO (2022) BENDING BEHAVIOUR OF CONCRETE FILLED STEEL TUBE (CFST) WITH CARBON FIBRE REINFORCED POLYMER (CFRP). [Final Year Project] (Submitted)

Vadiveloo, Jivendra (2022) Boron Removal Through Precipitation Process in Produced Water. [Final Year Project] (Submitted)

MOHD ALI, NUR IMAN (2022) Comparison of Mesophilic and Thermophilic Anaerobic Digestion of McDonald’s Wastewater. [Final Year Project] (Submitted)

Mohamad Razali, Muhammad Najmi Zafran (2022) Composting of Cooking Residue from Fast Food Restaurant and Fertilizer Production. [Final Year Project] (Submitted)

Izzuddin, : Muhammad Naqib (2022) Computational Fluid Dynamic Around a Pier by using LABSWE TM. [Final Year Project] (Submitted)

Mansor, Mohammad Shakir (2022) Computational Modelling of Open Channel Flow Around Bridge Piers. [Final Year Project] (Submitted)

Umat Lokman, Muhammad Zul Irfan (2022) Constructed Wetland System for Peat Soil Ecosystem Restoration and Water Quality Analysis. [Final Year Project] (Submitted)

Juma’at, Najmi Afiq (2022) Dynamic Analysis of Floating Solar Unit Subjected to Waves & Current Loadings-Numerical Modelling. [Final Year Project] (Submitted)

Abdul Rashid, Abdul Rais (2022) Effects of Shear Studs and Opening in the Mechanical Performance of the Composite Floor Deck – Numerical Modelling. [Final Year Project] (Submitted)

Abdi, Nur Shalin (2022) Effects of Change of Socialising and Discretionary Trips, and Activities During COVID-19 Pandemic on Social and Mental Health. [Final Year Project] (Submitted)

Khairul Anuar, Nurul Najihah (2022) Flood Susceptibility Mapping Using GIS and AHP in Kelantan. [Final Year Project] (Submitted)

ZAIROL AFFENDI, NOR ZAFATINAH (2022) FLOOD SUSCEPTIBILITY MAPPING USING GIS AND FUZZY AHP. [Final Year Project] (Submitted)

Lim, Yue Sheng (2022) Graphene Modified Cement for High Performance Repair. [Final Year Project] (Submitted)

GOH, ZHEN CHEAN (2022) INVESTIGATING THE MECHANICAL PROPERTIES Of LIGHTWEIGHT CO2 AERATED BRICK. [Final Year Project] (Submitted)

JOSHUA CHOO, LEY ERN (2022) Mechanical and Deformation Properties of Rubberized Engineered Cementitious Composites (ECC) Containing 3D-Printed Origami Hollow Bodies. [Final Year Project] (Submitted)

Kamaruzaman, Nurul Balkhis Athirah (2022) Prediction of Land Use Changes and Flood Risk Maps Using GIS and ANN Modelling in Perak. [Final Year Project] (Submitted)

Mohamad Shiham, Nasiha Sofwani (2022) Numerical Simulation of Morning Glory Spillway at Various Discharge Capacity using Lattice Boltzmann Method. [Final Year Project] (Submitted)

Aliges, Risban (2022) Potential Additive in Engineered Soil Media for Train Treatment System. [Final Year Project] (Submitted)

MOHD HASBULLAH, MUHAMAD SYAHMI SYAQIR (2022) READINESS OF CONSTRUCTION INDUSTRY STAKEHOLDERS TOWARDS IR4.0. [Final Year Project] (Submitted)

Alias, Mohamad Rahmad (2022) Response Surface Methodology (RSM) Optimization of Geopolymer Palm Oil Clinker Fines (GeoPOCF) and Bitumen Content for Geopolymer Modified Asphalt Mixtures. [Final Year Project] (Submitted)

Mohd Hamka, Nur Aqila (2022) Silica Gel from Sugarcane Bagasse Ash as Cement Replacement Material: Effect of Burning Temperature of Pre-Treated Sugarcane Bagasse Ash. [Final Year Project] (Submitted)

Zainal Ariffin, Zakiah (2022) Slope Stability Analysis in Residual Soils. [Final Year Project] (Submitted)

AZMERA, ZAKIAH HANUM (2022) THE EFFECTS OF CHANGES IN SOCIALIZING TRIPS, DISCRETIONARY TRIPS AND ACTIVITIES DURING COVID-19 PANDEMICS ON AFFECTIVE WELL-BEING. [Final Year Project] (Submitted)

JIUN YANN, LEE (2022) Treatment of Sludge Waste from Electronic Factory and Conversion to Construction Material. [Final Year Project] (Submitted)

Abdul Manaf, Muhammad Nashrun Naim (2022) Use Of Hexagonal Cork Sheets For Evaporation Control: An Experimental. [Final Year Project] (Submitted)

Patapal Naidu, Daanesh Naidu (2022) Modelling and Analysis of Solar Hybrid Fuel Cell Propulsion System for Autonomous Unmanned Surface Vessel. [Final Year Project] (Submitted)

Varatharajoo, Hashmentd Rajah (2022) Modelling And Simulation of A Series-Parallel Hybrid Propulsion System For A Fixed Wing Quadcopter. [Final Year Project] (Submitted)

Settan, Jayashellan Vishnu (2022) Thermal Modelling and Analysis of Lithium Iron Phosphate Battery Pack in Small Electric Vehicles. [Final Year Project] (Submitted)

R Selvaraja, Skandha Kumar (2022) The Corrosion Behaviour of Glass Fibre Reinforced Polymer Strengthened Steel Under High Temperature Environment. [Final Year Project] (Submitted)

George, Jeffy Cherian (2022) Study of mechanical and thermal properties of MXene - PVDF hybrid composite film for automotive industry. [Final Year Project] (Submitted)

A. Rashid, Muhammad Hamizan (2022) Enhancement Evaluation of Experimental Solar Chimney by Extended Solar Heat Trap. [Final Year Project] (Submitted)

Abdul Razak, Hafizhun Husna (2022) Development of Reliability, Availability and Maintainability (RAM) Model for Solar PV System. [Final Year Project] (Submitted)

Mazlan, Nur Diniey Nadhirah (2022) Development of Excel-Based RBI Model for Stress Corrosion Cracking. [Final Year Project] (Submitted)

Azmi, Maziah (2022) Estimating Generalized Renewal Process (GRP) Model Parameters for Repairable Systems using Monte Carlo Approach. [Final Year Project] (Submitted)

Sanjay, Singh Sandhu (2022) Measurement of the water absorption on hybrid fibre waste composite and its impact on flexural performance. [Final Year Project] (Submitted)

Mohd Rosdi, Muhammad Muizzuddin (2022) Simulation For Embedding Conformal Heating Channel In Oil & Gas Angle Valve Using Additive Manufacturing Technology. [Final Year Project] (Submitted)

Shahrul Azran Huzzeini, Shahryl Solehi Huzzeini (2022) Investigation On The Effect Of Process Parameters On Temperature Profiles Of Friction Stir Processed AA7075/SiC Composites. [Final Year Project] (Submitted)