Items where Year is 2016

Group by: Creators | Item Type | No Grouping

Number of items: 1409.

A/L M. Elanjaran, Yuwerajen Mohan (2016) Carbon Dioxide Dry Reforming over Molybdenum Oxide Supported Nickel-Cerium Catalyst To Produce Synthesis Gas. [Final Year Project]

A/P Subramaniam, Renuga Devi (2016) Seismic Modeling and Imaging for Complex Structures. [Final Year Project] (Submitted)

Abdul Hakim, Siti Amanina Farhanah (2016) Application of Seismic Geomorphology and Spectral Decomposition: A Case of Field B in PM318 Block, Malay Basin. [Final Year Project]

B Md Ghazali, Luqman Hakim (2016) Petrology of the Southeastern Part of the Gunung Jerai. [Final Year Project] (Submitted)

Bin Azhar, Muhammad Zulhelmi (2016) Source and Trap Elements of Petroleum System Analogue Study, Along Cameron Highland - Gua Musang Road. [Final Year Project] (Submitted)

Bin Hamzah, Hazeet Fikry (2016) Sedimentology and Depositional Environment of the Semantan Formation, Central Pahang. [Final Year Project] (Submitted)

Bin Wan Zurushdi , Ahmad Faiz Asyraf (2016) Sedimentology and Structural Geology of the Belaga Formation in Tatau, Sarawak. [Final Year Project] (Submitted)

Binti Abdullah, Ashley Aisyah Yoong (2016) Application of Simultaneous Inversion Method To Predict The Lithology And Fluid Distribution in “X” Field, Malay Basin. [Final Year Project] (Submitted)

Binti Mohd Azli, Nadiah (2016) Understanding The Geology of Bukit Tinggi, Pahang Through Geophysical Study. [Final Year Project] (Submitted)

Binti Nordin , Nurfaradine (2016) Palaeontology and Depositional Setting of Chert Member, Semanggol Formation, North Kedah. [Final Year Project] (Submitted)

Januarisma, Vikri (2016) Eliminate P-wave Direction in Application of Exploration Seismology. [Final Year Project] (Submitted)

Jing Hang , Eric Teng (2016) Geology and Sedimentology of Transect I – East Face, Central Gunung Semanggol, Bukit Merah, Perak. [Final Year Project] (Submitted)

Mohd Naguib, Muhammad Naqiuddin (2016) Rock Slope Stability at Bukit Permata, Lumut, Perak. [Final Year Project]

Mohd Roslan, Siti Nurfathi Athira (2016) Geology of Gunung Kandu Area, Gopeng with Emphasis on Rock Slope Stability. [Final Year Project]

Shek Houng, Douglas Law (2016) Integrated Geophysical Study to Delineate Subsurface Structures in Seri Iskandar, Perak: The Kati Formation. [Final Year Project] (Submitted)

binti Mustapha, Jihan Rufaidah (2016) Geology of the Simpang Pulai area with emphasis on the stability of the northern cliff of Gunung Lanno, Kinta Valley. [Final Year Project] (Submitted)

binti Syed Mansor, Sharifah Nurfarhana (2016) The Geology and Economic Potential of Gunung Terendum Area, Simpang Pulai. [Final Year Project] (Submitted)

,, MUHAMMAD ASLAM (2016) POWDER INJECTION MOLDING OF MODIFIED 3I6L STAINLESS STEEL FOR DENTAL IMPLANT APPLICATION. PhD. thesis, Universiti Teknologi PETRONAS.

,, MUHAMMAD AWAIS (2016) CLASSIFICATION OF ORAL POTENTIAL MALIGNANT DISORDERS (OPMDS) AND NORMAL REGION OF ORAL CAVITY USING VELSCOPE IMAGES. Masters thesis, Universiti Teknologi PETRONAS.

,, MUHAMMAD IRFAN (2016) ANON-INVASIVE CONDITION MONITORING AND FAULT DIAGNOSIS SYSTEM FOR INDUCTION MOTORS. PhD. thesis, Universiti Teknologi PETRONAS.

,, MUHAMMAD YASAR (2016) IMPROVEMENT OF PRESSURE AND COMPRESSIVE STRAIN SENSING USING PRISTINE CARBON NANOTUBES FOREST. Masters thesis, Universiti Teknologi PETRONAS.

,, MUHAMMAD ZULFIQAR (2016) SOLVOTHERMAL SYNTHESIS OF Ti02 NANOMATERIALS FOR THE REMEDATION OF ORANGE II DYE. Masters thesis, Universiti Teknologi PETRONAS.

,, REVIE FINANCIE (2016) INTEGRATED IONIC LIQUID PRETREATMENT WITH ENZYMATIC DELIGNIFICATION FOR SEPARATION OF CELLULOSE RICH FIBERS FROM OIL PALM BIOMASS. Masters thesis, Universiti Teknologi PETRONAS.

,,, Firmansyah (2016) Mixture and Thermal Stratification Effects on the RCCI Combussion in a Constant Volume Chamber. Doctoral thesis, Universiti Teknologi PETRONAS.

,,, Muhammad Abdulkarim (2016) Surrogate Models for Airwaves Estimation in Shallow Water Sea Bed Logging Data. Doctoral thesis, Universiti Teknologi PETRONAS.

,,, Muhammad Mubashir (2016) Ultrasonic-assisted Secondary Growth of Decadodecasil 3 Rhombohedral (DD3R) Membrane, Synthesis, Characterization and its Performance in CO2/CH4 Separation. Masters thesis, Universiti Teknologi PETRONAS.

,,, Muhammad Sarwar (2016) Integrated Framework for On-Site Welding of Creep Strength Enhanced (CSEF) Pipes for Supercritical Conditions. Doctoral thesis, Universiti Teknologi PETRONAS.

,,, Muhammad Yasir (2016) The Study of Machinibility and Stress Corrosion Cracking Susceptibility of 316L Stainless Steel using End-Milling. Masters thesis, Universiti Teknologi PETRONAS.

,,, Muhammad Zulfiqar (2016) Solvothermal Synthesis of TiO2 Nanomaterials for the Remediation of Orange II Dye. Masters thesis, Universiti Teknologi PETRONAS.

,,, Revie Financie (2016) Integrated Ionic Liquid Pretreatmemt with Enzymatic Delignification for Separation of Cellulose Fibers from Oil Palm Biomass. Masters thesis, Universiti Teknologi PETRONAS.

,,, Zul Indra (2016) An Integrated Generic Text Classification Algorithm for Indonesian and Malay Documents. Masters thesis, Universiti Teknologi PETRONAS.

., AFOLABI LUKMON OWOLABI (2016) PERFORMANCE ENHANCEMENT OF NANO-ADDITIVES IN A FLAT-PLATE SOLAR COLLECTOR INTEGRATED WITH THERMAL ENERGY STORAGE SYSTEMS. PhD. thesis, Universiti Teknologi PETRONAS.

., AHMAD HASSAN (2016) FIRE HAZARDS & RISK ASSESSMENT IN OFFSHORE PETROLEUM FACILITIES. [Final Year Project] (Submitted)

., Koh Kelly (2016) Experimental Evaluation of Innovated Mixed Flow Wind Turbine for Updraft Solar Power Generation Systems. [Final Year Project]

., Muhamad Fadhli Bin Rosli (2016) Mechanical Properties and Microstructural Evaluation of Dissimilar Friction Stir Weld of AA6061 Aluminium Alloy and AA5083 Aluminium Alloy. [Final Year Project]

., Muhammad Izwan Bin Hazim (2016) Investigation of Open Source Optimizers for Mechanical Design Optimization Problems. [Final Year Project]

., Ng Yan Lim @ Chia Yan Lim (2016) Heart Disease Detection Using Mobile Phone and Wireless Sensor Networks. [Final Year Project] (Submitted)

@ CHAI KIM HOE, TSHAI KIM HOE (2016) GREEN AMMONIA-UREA SYNTHESIS VIA MAGNETIC INDUCTION METHOD USING ALIGNED HEMATITE NANOWIRES. PhD. thesis, Universiti Teknologi PETRONAS.

@Sinawat, Clement Welley (2016) Investigation On the Physical, Mechanical and Corrosion Behaviour of 316L Austenitic Stainless Steel Nitriding at Elevated Temperature. [Final Year Project] (Submitted)

A Rahim, Nurkamariah (2016) AN INVESTIGATION OF MECHANICAL PROPERTIES ON NITRIDED AUSTENITIC STAINLESS STEEL. [Final Year Project] (Submitted)

A Siaramu, Arvin Kumar (2016) A Study of Corrosion Behaviour for Steels Precipitated with Paraffin Wax Precipitation. [Final Year Project] (Submitted)

A. Majid, Maizan Amani (2016) Droplet Impact Behaviour of Modified Geopolymer Solution on Urea Surface. [Final Year Project]

A.Kumar, Ganesh (2016) An effective optimization of rainwater storage tanks for different roof materials in commercial buildings. [Final Year Project] (Submitted)

A/L AIYYAPPAN, BHUVANA RUEBEN (2016) A STUDY OF MECHANICAL PROPERTIES AND CRUSHING PERFORMANCE OF CARBON FIBER WOUND TO HDPE PIPE (CFWHP. [Final Year Project] (Submitted)

A/L Arumugam, Thibankumar (2016) Characterization of Methane Based Graphene Synthesis on H13 Tool Steel. [Final Year Project] (Submitted)

A/L Christopher, Benedict Chris (2016) Evaluation On Corrosion Resistance Of X-65 Pipeline Steel To Various Species Of Microbes. [Final Year Project] (Submitted)

A/L D. Ramanujam, Keeran Daniel (2016) Mooring Analysis of Very Large Floating Structures in Malaysian South China Sea Waters. [Final Year Project] (Submitted)

A/L Dev Kumar, Sujev Kumar (2016) Enhancement of Fire Resistance of Intumescent Coatings by Basalt and Refractory-Type Hybrid Fibre. [Final Year Project] (Submitted)

A/L ELIYATHAMBY, DHANARAJ (2016) Dynamic Analysis of Stick-Slip and Bit Bounce in Oilwell Drillstring. [Final Year Project] (Submitted)

A/L KUMARAN, DEVENTERAN (2016) Development of Novel Multilevel Inverter with Reduced Power Switches. [Final Year Project] (Submitted)

A/L Karuppiah, Yuveneshraj (2016) Diagnosis of Poor Control Loop Performance: Investigate Support Vector Regression Method on Stiction Quantification for Control Valve Nonlinearity. [Final Year Project]

A/L Manogaran, Yuanath (2016) A Study of Hypertensive Retinopathy Changes and the Grading System of Hypertensive. [Final Year Project] (Submitted)

A/L Muniandy, Prathab (2016) Dynamic Analysis of High Frequency Vibro-Impact Drilling. [Final Year Project] (Submitted)

A/L P.Vellen, Nithianantham (2016) Closed Loop Identification of Distillation Column. [Final Year Project]

A/L Prakasan, Arjund (2016) EFFECT OF TRANSVERSE, LONGITUDINAL AND VERTICAL SEPARATION ON DRAG FOR A FLEET OF AUTONOMOUS UNDERWATER GLIDER. [Final Year Project] (Submitted)

A/L RAJU, KISHEN RAJ (2016) ANALYSIS AND INVESTIGATION OF IMAGE TRANSMISSION VIA RADIO FREQUENCY. [Final Year Project] (Submitted)

A/L RAMANATHAN, RAVIVARMA (2016) PERFORMANCE IMPROVEMENT OF ELECTRIC POWER GENERATION FOR OSCILLATING WATER COLUMN (OWC) WAVE ENERGY CONVERTER. [Final Year Project] (Submitted)

A/L Ramesh, Potriyan Sivanathan (2016) Performance Evaluation of Fixed Plate Air To Air Energy Recovery Heat Exchanger in Buildings Air Conditioning System. [Final Year Project] (Submitted)

A/L SANMUGAM, LINGESHGUGAN (2016) THE DEVELOPMENT OF DUAL BAND DRA HYBRID ANTENNA. [Final Year Project] (Submitted)

A/L Shanmugam, Kevindran (2016) Modification of Asphalt Binder by Incorporating Coconut Shell Powder. [Final Year Project] (Submitted)

A/L Sivem, Prasanthran (2016) Edge Detection Algorithm For Image Processing Of Search And Rescue Robot. [Final Year Project] (Submitted)

A/L THANARAJEE, SHAATIESH (2016) Vibration Analysis of Carbon Nanotube Based Bio-Sensors. [Final Year Project] (Submitted)

A/L Vesvanathan, Dhivendra (2016) Performance study of an engine waste heat driven adsorption cooling for automotive air conditioning. [Final Year Project] (Submitted)

A/L Vijayakumaran, Harrivin (2016) Simulation of Swirling Wet Steam Flow through a Supersonic Nozzle. [Final Year Project]

A/P AMARJIT SINGH, SHERLINAJIT KAUR (2016) Development of Preliminary Mercury Management Guideline in Platform Decommissioning for Peninsular Malaysia Operations. [Final Year Project] (Submitted)

A/P Manoharan, Lachmi Sri (2016) Use of Scrap Marine Pipelines as Submerged Breakwaters. [Final Year Project] (Submitted)

A/P Raman, Nanthini (2016) Feasibility of Using Ionic Liquids as an Environment Friendly Corrosion Inhibitor of Carbon Steel in the Acidic Solution. [Final Year Project]

A/P Ramesh, Lavenia (2016) Utilization of Waste Eggshell as Potential Adsorbent for Removal of Oil and Grease from Water. [Final Year Project]

A/P Ravindran, Nandini (2016) Stroke Prediction from Hypertensive Retinopathy. [Final Year Project] (Submitted)

A/P SENIVASAN, SUGANTI (2016) Solar Energy Harvesting for Wireless Sensor Network (WSN). [Final Year Project] (Submitted)

A/P Subramaniam, Renuga Devi (2016) Seismic Modeling and Imaging for Complex Structures. [Final Year Project] (Submitted)

ABD MOKTI, NOORAKBAR (2016) Wear Analysis of Tungsten Carbide Coated with Diamond-Like Carbon as Friction Stir Welding Tool. [Final Year Project] (Submitted)

ABDELGADIR, OMER EISA BABIKER (2016) MOLECULAR DESIGN AND SYNTHESIS OF PIPERAZINEDIIUM DUAL CHARGE CATION IONIC LIQUIDS FOR C02 CAPTURE. PhD. thesis, Universiti Teknologi PETRONAS.

ABDUL GHAFOOR, MUHAMMAD HAFIDZ (2016) A SOLAR RADIATION PREDICTION MODEL FOR APPLICATIONS IN ENERGY HARVESTING. [Final Year Project] (Submitted)

ABDUL HALIM, HAIRUL NAZIRAH (2016) C02 ABSORPTION FROM NATURAL GAS USING PIPERAZINE PROMOTED 2-AMIN0-2-METHYL-1-PROPANOL SOL VENT AT HIGH PRESSURE CONDITIONS. PhD. thesis, Universiti Teknologi PETRONAS.

ABDUL JALIL, NURSYAZWANI (2016) SEDIMENTOLOGY AND STRATIGRAPHY OF THE KUDAT FORMATION (OLIGOCENE- EARLY MIOCENE), KUDAT PENINSULA, SABAH. Masters thesis, Universiti Teknologi PETRONAS.

ABDUL MANAB, MUHAMMAD ZHARIF (2016) EFFICIENT AND ROBUST VESSEL DETECTION SYSTEM. [Final Year Project] (Submitted)

ABDUL MUIS, MUHAMAD AZIM (2016) Potential Application of Biocomposite from Seaweed as a Green Construction Material. [Final Year Project]

ABDUL RAHIM, ROSNIZA HANIM (2016) DEVELOPMENT OF SODIUM SILICATE FREE BASED GEOPOLYMERS FOR UREA DIFFUSION STUDIES. Masters thesis, Universiti Teknologi PETRONAS.

ABDUL RASHID, RAFIDAH (2016) IMPACT OF SAFETY COMMUNICATION ON SAFETY COMMITMENT IN AN OIL AND GAS COMPANY: LMX AS THE MODERATING FACTOR. Masters thesis, Universiti Teknologi PETRONAS.

ABOU ELAIZ, AHMED MAMDOUH (2016) SLAG BASED CONCRETE. [Final Year Project]

ABUALQUMBOZ, MOTASEM S (2016) MODELLING OF PMio CONCENTRATIONS IN AN UNDERGROUND ENCLOSED LOADING DOCK IN MALAYSIA. Masters thesis, Universiti Teknologi PETRONAS.

AHMAD, ISHAQ (2016) POTENTIAL OF FLY ASH AS A FOAM STABILIZING ADDITIVE. Masters thesis, Universiti Teknologi PETRONAS.

AHMED SATTl, IFTIKHAR (2016) OVERPRESSURE MECHANISM AND PREDICTION IN THE MALAY BASIN. PhD. thesis, Universiti Teknologi PETRONAS.

AKBAR, AHMAD RADIKAL (2016) DEVELOPMENT OF AUTO-REINFORCE MAGNETIC FLYWHEEL AS REGENERATIVE ENERGY STORAGE FOR AUTOMOBILE ENGINE. Masters thesis, Universiti Teknologi PETRONAS.

AL-YACOUBY, AMMAD MAHAMAD (2016) DETERMINATION OF HYDRODYNAMIC COEFFICIENTS AND VORTEX INDUCED VIBRATIONS FOR TUBULAR CYLINDERS USING EXPERIMENTAL AND NUMERICAL MODELLING. PhD. thesis, Universiti Teknologi PETRONAS.

ALFATESH, MOHAMMED TAHER (2016) FLUX AND REJECTION OF SALTS BY USING COMMERCIAL NANOFILTRATION MEMBRANES. [Final Year Project]

ALFIAA BASALLOM, SADDAM HASAN (2016) AN INVESTIGATION ON DEVELOPMENT OF A FUZZY CONTROLLER FROM THE VIEW OF STATE-SPACE SYSTEM. [Final Year Project]

ALI SIYAL, AHMER (2016) A STUDY ON SYNTHESIS AND GEOPOLYMERIZATION KINETICS OF FLY ASH BASED GEOPOLYMER. Masters thesis, Universiti Teknologi PETRONAS.

AMIR, ADIBAH (2016) WEAR MECHANISM OF IRON COMPOSITE REINFORCED WITH SILICA. PhD. thesis, Universiti Teknologi PETRONAS.

AMIRUL LUTHFI CHAN, HAZIQ LUTHFI (2016) Experimental Study on the Impact of Wet Sand Particle to the Erosion of Mild Steel Plate. [Final Year Project] (Submitted)

ARANG, JANNET BULAN (2016) SCALING RATIO EFFECTS ON THE PREDICTION OF DYNAMIC MOTION OF TENSION LEG PLATFORM PROTOTYPE IN THE VIEW OF TESTING FACILITIES LIMITATIONS. [Final Year Project] (Submitted)

ASLAM, MUHAMMAD (2016) Powder Injection Molding of Modified 316L Stainless Steel for Dental Implant Application. PhD. thesis, Universiti Teknologi PETRONAS.

AUGUSTIN JOHN, ALVIN ANAND (2016) Integration of Key Building Blocks for Search and Rescue Robots (Serabot). [Final Year Project] (Submitted)

AWADH AHMED BA RAHMA, AHMED (2016) NONLINEAR FINITE ELEMENT ANALYSIS OF THIN-WALLED STEEL TUBE AND CONCRETE-FILLED STEEL TUBE (CFT) COLUMNS. [Final Year Project]

AYILARA, AJIBOLA QUADRI (2016) A FRAMEWORK FOR FATIGUE ASSESSMENT OF STEEL TRUSS BRIDGES. Masters thesis, Universiti Teknologi PETRONAS.

AZHAR, MOHAMAD HAIQAL (2016) TIME DEPENDENT RELIABILITY ASSESSMENT OF MALAYSIA’S JACKET PLATFORM. [Final Year Project] (Submitted)

Ab Hadi, Muhamad Naqiuddin (2016) Cellular Core Sandwich Structures for Offshore Construction. [Final Year Project] (Submitted)

Ab Rahman, Firdaus (2016) SOLAR BATTERY STORAGE SYSTEM. [Final Year Project] (Submitted)

Ab Rahman, Luqman Nur Hakim (2016) VOLTAGE STABILITY ANALYSIS FOR ENSURING POWER SYSTEM STABILITY. [Final Year Project] (Submitted)

Ab. Halim, Naqiatul Amirah (2016) ENHANCING THE CAPABILITIES OF SEARCH AND RESCUE ROBOT (BAMBOT). [Final Year Project] (Submitted)

Ab. Kadir, Nuraqliah (2016) SIMULATION STUDY ON SMART SPRINKLER FOR UNIFORMITY IMPROVEMENT. [Final Year Project] (Submitted)

Abaga Ntongono, Melchor Felipe (2016) Multiband Amateur Radio Antenna Design. [Final Year Project] (Submitted)

Abbas Atya, Abbas Hassan (2016) Characteristic Study and Combustion of Dewatered Poulty Sludge in a Laboratory Scale Fluidized Bed Combustor. Doctoral thesis, Universiti Teknologi PETRONAS.

Abd Elghafoor Hassan, Reem Hassan (2016) Dynamic of Wall Heated Multi-tubular Catalytic Packed Bed Reactor. Masters thesis, Universiti Teknologi PETRONAS.

Abd Hafidz, Muhammad Ashraff (2016) Monitoring the Influence of Different Fluid Saturations Using Ultrasonic Velocity and Resistivity Measurement. [Final Year Project]

Abd Manaf, Maizatul Asnida (2016) The Hologene-to-Recent Geomorphological, Sedimentological and Stratigraphic Development of the Lower Perak River and its Coastal-Deltaic Plain. Masters thesis, Universiti Teknologi PETRONAS.

Abd Rahman, Hadam (2016) Neutral Earthing Impedance Design in Mitigating Third Harmonic Current At The Generator Neutral. [Final Year Project] (Submitted)

Abd Rashid, Muhamad Naim (2016) Wear Resistance Study of Nitrided ASS 316L Above The Sensitization Temperature of 1200oC. [Final Year Project] (Submitted)

Abd Sukur, Nur ‘Amirah (2016) Modelling Surface Mapping for Engineering Application. [Final Year Project]

Abdalla, Abdulrahman Yousif (2016) Experimental and Numerical Simulation Investigations of Non-Newtonian Flow in Straight and Curved Pipes for Drag Reduction. Masters thesis, Universiti Teknologi PETRONAS.

Abdelgadir, Omer Eisa Babiker (2016) Molecular Design and Synthesis of Piperazinediium Dual Charge Cation Ionic Liquids for CO2 Capture. Doctoral thesis, Universiti Teknologi PETRONAS.

Abdelhafiz Musa, Ahmed Abdelrahman (2016) HARMONICS IMPACT ON LOW VOLTAGE (LV) GRID CONNECTED SOLAR PHOTOVOLTAIC (GCSPV) SYSTEM. [Final Year Project]

Abdillah, Fauziah (2016) Removing Oil Impurity by Using Biomass Cell of Water Hyacinth. [Final Year Project] (Submitted)

Abdul Aziz, Hanida (2016) Development of Integrated Process Safety Management System for Process Industries. Doctoral thesis, Universiti Teknologi PETRONAS.

Abdul Aziz, Ahmad Farhan (2016) Induction Motor Performance During Voltage Dip. [Final Year Project] (Submitted)

Abdul Aziz, Amirul Afif (2016) Mangrove Capability as Natural Coastal Defense Using Remote Sensing and GIS Assessment. [Final Year Project]

Abdul Haleem, Azreennisa (2016) Optimisation of Biomass Supply Chain Management Using P-Graph Application in FELDA Jengka. [Final Year Project]

Abdul Malek, Muhammad Fadzly (2016) AUGMENTED REALITY BASED INDOOR POSITIONING NAVIGATION TOOL. [Final Year Project] (Submitted)

Abdul Malek, Wan Nuradila (2016) Mechanical Properties of Recycled HDPE-Areca Leaf Sheath Fiber Composite. [Final Year Project] (Submitted)

Abdul Manaf, Marlina (2016) Vibration Sensing and Non-Speech Visual Fire Notification for Hearing Impaired Students. Masters thesis, Universiti Teknologi PETRONAS.

Abdul Rahim, Rosniza Hanim (2016) Development of Sodium Silicate Free Based Geopolymers for Urea Diffussion Studies. Masters thesis, Universiti Teknologi PETRONAS.

Abdul Rahim, Mohamad Syazwan (2016) Structural Analysis of Rotating Baffles in a CO2 Separator. [Final Year Project] (Submitted)

Abdul Rahim, Muhammad Adib (2016) Design and Development of 3D Printed Robotic Gripper. [Final Year Project] (Submitted)

Abdul Rahman, Mohd Ridzuan (2016) Tensile and Flexural Properties of Woven Micro-Braided Yarn Composite. [Final Year Project] (Submitted)

Abdul Somad, Aiman (2016) Comparative Study of Different Coil Geometries for Wireless Power Transfer Using Finite Element Method. [Final Year Project] (Submitted)

Abdul Wahab, Nor Diana (2016) Assessment of Human Factor Performance Level from Resilience Engineering Perspective: RAHuF Methodology. Doctoral thesis, Universiti Teknologi PETRONAS.

Abdul Wali, Muhamad Ammar (2016) Study of Force Feedback in Steer-By-Wire Vehicles for Driving Simulator. [Final Year Project] (Submitted)

Abdulkadir, Said Jadid (2016) Hybridization of Scaled Unscented Kalman Filter and NARX Neural Network for Chaotic Time-series Forecasting. Doctoral thesis, Universiti Teknologi PETRONAS.

Abdullah, Abdul Hanif (2016) Effect of Ferrous (. [Final Year Project] (Submitted)

Abdullah, Abdul Haris (2016) The Comparison between SMAW and FSW Performances on Microstructure, Hardness and Corrosion Susceptibility of Carbon Steel. [Final Year Project] (Submitted)

Abdullah, Ahmad Afif (2016) Solar Desiccant Cooling System. [Final Year Project] (Submitted)

Abdullah, Muhammad Al Fikhri (2016) Analysis of Instabilities Dynamics in Discontinuous Stratified Flow in Horizontal Pipeline. [Final Year Project] (Submitted)

Abdullah, NurFarah Hanim (2016) Data Exchange among Multiple Robots. [Final Year Project] (Submitted)

Abdullah Yaslam Al-Mashgari, Hafedh (2016) LESSONS LEARNED FROM THE 2011 GREAT EAST JAPAN EARTHQUAKE TRIGGERED TSUNAMI. [Final Year Project]

Abdulmalik Al-Maqdad, Abdulmalik Kamal (2016) An Artificial Neural Network Model of Nutrient Release from Polymer-Coated Fertilizers. [Final Year Project] (Submitted)

Abu Bakar, Fatin Amirah (2016) Prediction of Pore Water-Pressure Using Multiple Linear Regression (MLR). [Final Year Project] (Submitted)

Abu Bakar, Nurin (2016) Parking Management System in UTP campus. [Final Year Project] (Submitted)

Abu Bakar, Nurin Firzanah (2016) Geology of Setap Shale Formation, Sarawak - Sector 3. [Final Year Project]

Abubakar, Mijinyawa (2016) Source Rock Characterization and Petroleum System Analysis of the Chad Basin, North Eastern Nigeria: Implication of Basin Modeling. Doctoral thesis, Universiti Teknologi PETRONAS.

Adam, Mohd Farid (2016) Numerical and Simulation Analysis of PDC cutter Associated with the Rate of Penetration. [Final Year Project] (Submitted)

Adebayo, Johnson Olufemi (2016) Waste Cooking Oil as a Binder for Building Bricks and Immobilization of Petroleum Sludge. Doctoral thesis, Universiti Teknologi PETRONAS.

Adeyemi, Bamikole Joshua (2016) Effect of Demulsifiers on the Separation of Water-Oil Emulsions. Masters thesis, Universiti Teknologi PETRONAS.

Adnan, Adni Hashira (2016) Evaluation of Carbon Dioxide Emission of Plate Heat Exchanger for Chilled Water Distribution. [Final Year Project] (Submitted)

Adnan, Anas (2016) Development of WirelessHART Adapter For Control Valve Actuation. [Final Year Project] (Submitted)

Adrian , Teh Kim Yoon (2016) Construction of Bored Piles In Limestone Area and Friction & Point Bearing Capacity Based On Field Test (Osterberg Test). [Final Year Project] (Submitted)

Ahmad, Muhamad Arif (2016) Effect of Axial Loading On the Lateral Behaviour of the Precast Post-Tensioned Segmental Column. [Final Year Project]

Ahmad, Bahauddin (2016) Geology and Structural Geology at Kg. Gajah, Perak. [Final Year Project]

Ahmad, Muhammad Hafiz (2016) General Geology With Emphasis On Structural Geology Of The Chert Member Of Semanggol Formation, Kebun 500, Pokok Sena, Kedah. [Final Year Project]

Ahmad, Nur Adzirah (2016) Microcontroller Based High Brightness LED Lighting Control for Hybrid Vehicles. [Final Year Project] (Submitted)

Ahmad Afif, Hafizah (2016) Microwave Induced Pyrolysis for Bio-oil Production from Lignocellulosic Biomass. Masters thesis, Universiti Teknologi PETRONAS.

Ahmad Astor, Asyilah (2016) Developing, Implementing, and Assessing Decoupling Control for UTP Air Pilot Plant. [Final Year Project] (Submitted)

Ahmad Fadzli, Izz Danial Al-Fayyadh (2016) Laser Target Tracking. [Final Year Project] (Submitted)

Ahmad Farid, Muhammad Nazrin (2016) Flammable and Thermal Analysis of Biodiesel Blends at Different Composition. [Final Year Project] (Submitted)

Ahmad Fauzi, Marwan Asyraaf (2016) Synthetic Analysis Of Fluid Flow Through Particle Image Velocimetry (PIV). [Final Year Project] (Submitted)

Ahmad Kujaji, Muhammad Hilmi (2016) Energy Optimization of Combustion Process in Carbonization Chamber via Computational Fluid Dynamics (CFD) Approach. [Final Year Project] (Submitted)

Ahmad Mardzuki, Mohd Nazri (2016) Simulated Offshore Platform Structural Monitoring System Using Real-Time Kinematics Global Positioning System. [Final Year Project] (Submitted)

Ahmad Nazmi, Amirah (2016) Harvesting of Microalgae Biomass using Bio-flocculant. [Final Year Project] (Submitted)

Ahmad Shobri, Alya Nabilah (2016) Synthesis and Characterization of Pyrrolidinium-based Ionic Liquid as A New Biodegradable Oil Dispersant. [Final Year Project]

Ahmad Yahya, Aqilah (2016) Assessment of stratigraphic and structural relationships of Devonian-Carboniferous successions in Kanthan area, northern part of the Kinta Valley, Peninsular Malaysia. [Final Year Project]

Ahmed Almahi, Abdelaziz Yousif (2016) Development of a CMOS-MEMS Mass-Sensitive Relative Humidity Sensor. Doctoral thesis, Universiti Teknologi PETRONAS.

Ahmed Elshekh, Ali Elheber (2016) Development of a Ductile Fiber Reinforced High Strength Concrete Incorporating Basalt, Polyvinyl Alcohol and Hybrid Fibers. Doctoral thesis, Universiti Teknologi PETRONAS.

Ahmed Siddiqui, Numair (2016) Reservoir Characteristics and 2-D Connectivity Modeling of Some Neogene Siliciclastic Shallow-Marine Successions of Sarawak and Sabah, Malaysia. Doctoral thesis, Universiti Teknologi PETRONAS.

Akbar, Ahmad Radikal (2016) Parametric Analysis of Auto-reinforce Magnetic Flywheel as Regenerative Energy Storage for Automobile Engine. Masters thesis, Universiti Teknologi PETRONAS.

Al Azemi, Fahad (2016) THE STUDY OF THE FATIGUE CHARACTERISTICS OF BITUMINOUS MIXTURES CONTAINING DEFFERENT AGGREGATE TYPES. [Final Year Project]

Al Batati, Nabil (2016) Simulation of Drill String Vibration due to Riser's Oscillation. Masters thesis, Universiti Teknologi PETRONAS.

Al-Yacouby, Ahmad Mahamad (2016) Experimental and Numerical Modelling of Hydrodynamic Coeffients and Vortex Induced Vibrations of Tubular Cylinders. Doctoral thesis, Universiti Teknologi PETRONAS.

Alabool, Hamzeh Mohammad Abdallah (2016) A Framework for Evaluating Trust in Infrastructure as a Service. Doctoral thesis, Universiti Teknologi PETRONAS.

Ali, Amal Seralkhatem Osman (2016) Age Invariant Face Recognition using Feature Level Fused Morphometry of Lip-nose and Periocular Region Features. Doctoral thesis, Universiti Teknologi PETRONAS.

Ali, Munwar (2016) Confidentiality Based Data Classification Using Sematic-K-NN Algorithm in Cloud Virtual Enviroment. Doctoral thesis, Universiti Teknologi PETRONAS.

Ali, Syed Muzammil (2016) Parametric Analysis on Reflector Designs of Single Element Cylindrical Dielectric Resonator Antenna (CDRA) for WLAN Applications. Masters thesis, Universiti Teknologi PETRONAS.

Ali, Amirulnaaim (2016) Modelling and Investigation of Wireless Power Transfer for Small Gap Applications. [Final Year Project] (Submitted)

Ali, Lina Fahimah (2016) Development of Excel Based Reliability Model to Estimate Life Distribution of Mechanical Seals. [Final Year Project] (Submitted)

Ali, Zain (2016) INVESTIGATION OF CONJUGATE HEAT TRANSFER OF A ROTATING LATENT HEAT ENERGY STORAGE. [Final Year Project] (Submitted)

Ali Ahmed, Hassan Abdelrahman (2016) Investigation in to Energy Storage of Solar Energy Harvesting Wireless Sensor Network. [Final Year Project] (Submitted)

Ali Dousa, Somia Mohamed (2016) Data fusion of video camera and Laser Range Finder (LRF) for obstacle avoidance. [Final Year Project] (Submitted)

Ali Osman, Ola Abdalgawi (2016) Kinetic Evaluation of Ammonium Based Ionic Liquids for CO2 and CH4 Hydrates Mitigation. [Final Year Project] (Submitted)

Ali Quddusi, Abul Hassan (2016) Study on Desublimation Based Cryogenic Packed Beds for CO2 Removal From Natural Gas. Doctoral thesis, Universiti Teknologi PETRONAS.

Aliyu, Ziyaulhaq (2016) Usability Evaluation of Model Transformations Verification Approches (MTVAs). Masters thesis, Universiti Teknologi PETRONAS.

Alkali, Adamu Umar (2016) Machiniability Study of Thermal Enhanced Machining of 316L Stainless Steel using Oxyacetylene Flame. Doctoral thesis, Universiti Teknologi PETRONAS.

Amalludin, Nurul Syuhada (2016) Early Detection Basal Stem Rot (BSR) using Electrical Capacitance Tomography (ECT). [Final Year Project] (Submitted)

Aman Zaharil, Muhammad Hafiz Osman (2016) Experimental Modeling and Evaluation of Solar Cooker For Malaysia Potential. [Final Year Project] (Submitted)

Amat, Arif Danial (2016) Cold-Flow CFD Analysis of Intake-Compression process for Hydrogen-Fuelled Internal Combustion Engine. [Final Year Project] (Submitted)

Aminuddin, Ikhwan Syamim (2016) Investigation of Mechanical properties of Nitrided Weldments of Austenitic Stainless Steel After Quenching. [Final Year Project] (Submitted)

Amir, Benni (2016) A STUDY ON STRUCTURAL INTEGRITY OF CORRODED OFFSHORE FIXED PLATFORM UTILIZING PUSHOVER ANALYSIS. [Final Year Project] (Submitted)

Amir Abdul Halim , Nur Amanina (2016) Evaluation of Modular Channel in Term of Flow Resistance. [Final Year Project]

Amir Johari, Muhammad Amir Faizal (2016) Laboratory Study on Slide Triggered Tsunami. [Final Year Project] (Submitted)

Amir Shariffudin, Amira Shakina (2016) Design & Characterization of resistance-based corrosion under-insulation sensor. [Final Year Project] (Submitted)

Anak Biga, Blythe Kollias (2016) Characterization of Restart Pressure in Production Pipeline for Waxy Crude Oil as A Result of Injection of Non-Reacting Gas. [Final Year Project] (Submitted)

Anak Richard, Angel (2016) Quality Characterization of the Vacuum-Bagging-Only (VBO) – Out Of Autoclave (OOA) Cured Composite Panels. [Final Year Project] (Submitted)

Ang , Yee Ying (2016) CFD Simulation of Two-Phase Separation in a Liquid Flash Drum. [Final Year Project]

Anuar, Ahmad Naufal (2016) Analysis of Wheel Rolling Resistance in a Personal Electric Vehicle. [Final Year Project] (Submitted)

Anuar, Mohamad Syarmie Faizlin (2016) Heart Rate Monitoring and Alert System Using Smartphone. [Final Year Project] (Submitted)

Anuar, Nurfarhana Aisya (2016) Potential Tsunami Impact to Coastal Vegetation and Geological Landscape at Pantai Batu Rakit, Kuala Terengganu. [Final Year Project]

Anuar, Nur’ Aizat (2016) Monitoring and Charging of Wheelchair Batteries Based on Internet of Things. [Final Year Project] (Submitted)

Arafat Mahdy, Amr Essam (2016) Investigation on The Effect of Drill Diameter During Bone Drilling for Surgery Applications. [Final Year Project] (Submitted)

Ardakani, Seyed Esmaeil Mahdavi (2016) Efficiency Enhancement of Dye Sensitized Solar Cell by Incorporating Graphene into the Electrodes. Doctoral thesis, Universiti Teknologi PETRONAS.

Ariffabilah, Muhammad Ilyasa Saffiq (2016) Isotherm Prediction Of Various Adsorbents On Moisture Removal From Ambient Air By Solver Function. [Final Year Project] (Submitted)

Armo, Dinish Kumar (2016) Experimental Study of Chloride Stress Corrosion Cracking In Stainless Steel. [Final Year Project] (Submitted)

Aslam, Muhammad Aslam (2016) Powder Injection Modeling of Modified 316L Stainless Steel for Dental Implant Application. Doctoral thesis, Universiti Teknologi PETRONAS.

Awadh Ba Dhib, Mohammed Ali (2016) MECHANICAL PROPERTIES OF HYBRID FIBER REINFORCED REACTIVE POWDER CONCRETE. [Final Year Project]

Awuah, Joel Ben (2016) Impact of Rock Heterogeneities on Reservoir Quality and Hydrocarbon Distribution in Offshore West Baram Delta. Doctoral thesis, Universiti Teknologi PETRONAS.

Ayob, Ashaari Muhammad (2016) Dengue Spread Model using Climate Variables. [Final Year Project] (Submitted)

Ayub, Nur Athirah (2016) Development of Copper-based Metal Organic Framework HKUST-1 /Cellulose Acetate Mixed-Matrix Membane for CO2/CH4 Removal. [Final Year Project] (Submitted)

Azahar, Muhammad Zahid (2016) Development Of Electronics Scoring System To Measure Dexterity For Laparoscopy (Keyhole) Surgery Training. [Final Year Project] (Submitted)

Azahari, Norfahira Najeehah (2016) General Geology of the Semanggol Formation in Bukit Kukus, Kedah with Emphasis on Deformation within Lower Chert Member. [Final Year Project]

Azhar, Fatin Solehah (2016) Geology of the Kampar Area with Emphasis on Geological Resources. [Final Year Project]

Azhari, Mohd Nur Hanif Aiman (2016) Effect of Reaction Process Parameters on Photocatalytic CO2 Reduction. [Final Year Project]

Aziz Al-Wakeel, Haitham Behnam (2016) Investigation on Localized Rapid Soot Oxidation using Metal-Assisted High Frequency Electromagnetic Heating. Doctoral thesis, Universiti Teknologi PETRONAS.

Azizuddin, Aliah Azlin (2016) DEVELOPMENT OF THERMAL INSULATION BY UTILIZNG EMPTY FRUIT BUNCH (EFB). [Final Year Project]

Azman, Ahmad Imran (2016) CORROSION INHIBITION PERFORMANCE BY OCTYLMETHYLIMIDAZOLIUM- BROMIDE OMIBr ON API 5L X52 STEEL IN 1.0M H2SO4. [Final Year Project] (Submitted)

Azman, Khairul Imran (2016) DEVELOPMENT OF TRADE SECRET MODEL BASED ON OSHA PROCESS SAFETY MANAGEMENT REQUIREMENT. [Final Year Project] (Submitted)

Azman, Muhammad Amirul (2016) Segmentation and Cell Counting of Fluorescence Oral Cancer Cell Images Using Morphological Operations. [Final Year Project] (Submitted)

Azmei, Wan Sofia (2016) Characteristics Study of Biomass Fuel from Poultry Waste using Thermogravimetric Analysis. [Final Year Project] (Submitted)

Aznan, Muhammad Firdaus (2016) Agricultural Waste or Residue as Adsorbent for Nickel Removal. [Final Year Project] (Submitted)

B Md Ghazali, Luqman Hakim (2016) Petrology of the Southeastern Part of the Gunung Jerai. [Final Year Project] (Submitted)

BALABID, AHMED MOHAMMED OBAID (2016) Selectivity Analysis for Simulated Natural Gas Mixtures Separation via Adsorption on Zeolite 13 X as Solid Desiccants. [Final Year Project]

BASHIRI, ROBABEH (2016) OPTIMIZATION OF TANDEM SOLAR CELL FOR HYDROGEN PRODUCTION. PhD. thesis, Universiti Teknologi PETRONAS.

BATHAEE, MAHMOOD (2016) WELLBORE STABILITY MODEL BASED ON ITERATIVE COUPLING METHOD FOR WATER ALTERNATING GAS (WAG)INJECTION. PhD. thesis, Universiti Teknologi PETRONAS.

BEKDASH, MONES (2016) EVALUATION OF HUMAN VISUAL PERCEPTION AND COGNITION TO CHROMATIC STIMULI USING P100/P300 EVENT RELATED POTENTIALS. Masters thesis, Universiti Teknologi PETRONAS.

BEN-A WUAH, JOEL (2016) Impact of Rock Heterogeneities on Reservoir Rock Quality and Hydrocarbon Distribution in Reservoir Rocks from Offshore West Bararn Delta, Sarawak Basin, Malaysia. PhD. thesis, Universiti Teknologi PETRONAS.

BEN-AWUAH, JOEL (2016) IMPACT OF ROCK HETEROGENEITIES ON RESERVOIR ROCK QUALITY AND HYDROCARBON DISTRIBUTION IN RESERVOIR ROCKS FROM OFFSHORE WEST BARAM DELTA, SARAWAK BASIN, MALAYSIA. PhD. thesis, Universiti Teknologi PETRONAS.

BHARADWAJ, ABHILASH MURALIDHAR (2016) CASING FAILURE ANALYSIS IN STEAM INJECTION WELL OPERATIONS USING FINITE ELEMENT METHODS. Masters thesis, Universiti Teknologi PETRONAS.

BIN ABDUL MALIK, MUHAMMAD HAZMI (2016) Application of Seismic Geomorphology for Exploration: Example of Block PM318, Malay Basin. [Final Year Project] (Submitted)

BOLHASSAN, NURUL SHAFINAZ (2016) IMPLEMENTATION OF NORMALIZED PID CONTROLLER FOR SYSTEMS WITH VARYING DELAY. [Final Year Project] (Submitted)

Ba Wazir, Abdulaziz Saleh Mahfoudh (2016) Performance Analysis and Calibration of a Novel CMOS-MEMS Humidity Sensor. [Final Year Project] (Submitted)

Badrul Hisham, Nor Aqilah Amira (2016) Performance of AlGaN/InGaN Multiple Quantum Well LEDs Simulated Using COMSOL. [Final Year Project] (Submitted)

Bagdat, Mombekov (2016) Wax Deposition Behavior in Ethylene-Tetrafluoroethylene Coated Pipe as Compared to PVC and Steel Pipes at Dynamic and Static Conditions. Masters thesis, Universiti Teknologi PETRONAS.

Baharuddin, Nursyafiqah Auni (2016) GEOLOGICAL RESOURCES OF GUNUNG KANDU, KINTA VALLEY, PERAK. [Final Year Project]

Baharudin, Siti Nur Amiha (2016) Seismic Attributes Analysis of Fluvial Channel in Angsi Field, Malay Basin. [Final Year Project]

Bahtiar, Muhammad Aiman (2016) Nano Polishing of Titanium Alloy with Ionic Liquid. [Final Year Project] (Submitted)

Ban, Zhen Hong (2016) In-line Physical Desorption Unit: Modelling, Design and Opmisation. Doctoral thesis, Universiti Teknologi PETRONAS.

Baqdhimh Barashaid, Ali Abdullah (2016) Effect of Ultrasonic Frequency on the Physical Absorption of CO2. [Final Year Project] (Submitted)

Bashiri, Robabeh (2016) Development of Tandem Solar Cell with Cu-Ni/TiO2 Photocatalyst for Hydrogen Production. Doctoral thesis, Universiti Teknologi PETRONAS.

Baskaran, Prasanth Raj (2016) Experimental Study on Effects of Welding Parameters on Microstructure & Mechanical Properties of AA6061-T6 Material Joined by Friction Stir Welding (FSW). [Final Year Project] (Submitted)

Bathaee, Mahmood (2016) Geomechanical Study of Water Alternating Gas (WAG) Injection Based on Iterative Coupling Method. Doctoral thesis, Universiti Teknologi PETRONAS.

Bekdash, Mones (2016) Evalulation of Human Visual Perception and Cognition to Chromatic Stimuli using P100/P300 Event Related Potentials. Masters thesis, Universiti Teknologi PETRONAS.

Ben Ghanem, Ouahid Ben Omar (2016) Development of Quantitative Structure-Activity Relationship Prediction Models for Non-Toxic Ionic Liquids. Doctoral thesis, Universiti Teknologi PETRONAS.

Bhayo, Bilawal Ahmed (2016) Experimental Investigation of S-rotors for Stand-alone Wind Power Applications. Masters thesis, Universiti Teknologi PETRONAS.

Bin Abdul Jalil, Irfan Azri (2016) Carbonate Sedimentology Of Gunung Kanthan In Chemor, Kinta Valley, Perak. [Final Year Project] (Submitted)

Bin Abdul Rahman, Mohammad Rizal (2016) Geology and Economic Potential of Limestone in Gunung Rapat Area, Perak, Malaysia. [Final Year Project] (Submitted)

Bin Hamzah, Hazeet Fikry (2016) Sedimentology and Depositional Environment of the Semantan Formation, Central Pahang. [Final Year Project] (Submitted)

Bin Mohd Mazlan, Muhammad Radziamir (2016) Tectono-Stratigraphic Model of East Face of Central Gunung Semanggol, Bukit Merah, Taiping, Perak. [Final Year Project] (Submitted)

Bin Mostaffa, Muhammad Iman (2016) Sedimentology of the Early Neogene Sarawak Basin (Onshore at Tatau Town to RumahSupitAkSeriang), Bintulu, Sarawak, Malaysia. [Final Year Project] (Submitted)

Bin Omar, Muhamad Nizarul Idhafi (2016) Modeling of Seismic and Resistivity Responses during the Injection of CO2 in Sandstone Reservoir. [Final Year Project] (Submitted)

Bin Roslan, Shazrul Hazwan (2016) Mineralogy and Geochemistry of Black Shale Outcrops at Batu Gajah, Perak. [Final Year Project] (Submitted)

Bin Roslan , Shazrul Hazwan (2016) Mineralogy and Geochemistry of Black Shale Outcrops at Batu Gajah, Perak. [Final Year Project] (Submitted)

Bin Saifulbahri, Ezzat Amirimran (2016) General Geology and Facies Characteristics of the Lambir Formation, Miri-Lambir, Sarawak, With Special Emphasis on Its Trace Fossil Contents. [Final Year Project] (Submitted)

Binti Mohd Azli, Nadiah (2016) Understanding The Geology of Bukit Tinggi, Pahang Through Geophysical Study. [Final Year Project] (Submitted)

Binti Mohd Rosdi, Nadhirah (2016) Geochemical Characteristic of the Nyalau Formation from Merit-Pila Coal Field, Sarawak, Malaysia: Its Implications on Depositional Condition and Thermal Maturity. [Final Year Project] (Submitted)

Binti Nordin, Nurfaradine (2016) Palaeontology and Depositional Setting of Chert Member, Semanggol Formation, North Kedah. [Final Year Project] (Submitted)

Binti Osman Ash’ari, Nadia Ashikin (2016) 2D TO 3D RESISTIVITY IMAGING ON DETERMINIG THE VOLUME OF SINKHOLE : STUDY CASE IN KAMPAR. [Final Year Project] (Submitted)

Bong, Yin Chung (2016) Functionalisation of Halloysite Nanotube for the Development of Mixed Matrix Membrane. [Final Year Project] (Submitted)

Boon, Tan Han (2016) CFD Comparative Study of 3-D Compressible Flow Over Seamless and Canard Aerodynamic Flying Bodies. [Final Year Project] (Submitted)

Boon Hong, Philip Goh (2016) RHU 3D SEISMIC DATA REPROCESSING, OFFSHORE PENINSULAR MALAYSIA. [Final Year Project]

CHAN , JUN HAN (2016) Dispersion and Distribution of MCM-48 Fillers in Polyethersulfone Matrix for Hybrid Membrane Development. [Final Year Project]

CHANDRAN, KRITTIKA (2016) DEVELOPMENT OF DEMULSIFIER FOR MALAYSIAN CRUDE OIL. Masters thesis, Universiti Teknologi PETRONAS.

CHEAH , YIT HOONG (2016) Properties of Nano Silica Modified High Permeable Concrete. [Final Year Project] (Submitted)

CHEONG, WILLIES Y.D (2016) Thermal Efficiency Study of the Combustion Chamber Designed for Small Scale Gas Turbine Engine Transformed from Turbocharger. [Final Year Project] (Submitted)

CHONG , QI WEN (2016) Treatment of Synthetic Waste Water by Vegetal Biopolymer as Natural Coagulant: A Comparison Study with Ferric Chloride. [Final Year Project] (Submitted)

CHUGHTAI, HAFIZ MUHAMMAD OMER (2016) DISTRIBUTED CONGESTION-A WARE TRAFFIC LOAD BALANCING SCHEMES FOR ROUTING IN WIRELESS SENSOR NETWORKS. PhD. thesis, Universiti Teknologi PETRONAS.

CHUI , PING YEO (2016) STRENGTH PERFORMANCE ANALYSIS OF AGED STEEL CATENARY RISERS. [Final Year Project] (Submitted)

Calvin , Low Eu Jin (2016) Development of a Self-diagnostic System for Photovoltaic based Highway Signage Boards and Warning Devices. [Final Year Project] (Submitted)

Cedric , Lemuel Lee (2016) A Study of Enriched CO2 on the Remediation of Heavy Metal Contaminated Soil Using Jatropha Curcas. [Final Year Project]

Chai, Tan Huat (2016) Root Cause Failure Analysis (RCFA) Root Causes Categorization and Generation of Recommended Data for RCFA Investigation. [Final Year Project] (Submitted)

Chai , Kah Sin (2016) Model-based Performance Analysis of Hydropurification Reactor. [Final Year Project]

Chala, Girma Tadesse (2016) The Formation of Gas Voids in Waxy Crude Oil with Thermal Shrinkage. Doctoral thesis, Universiti Teknologi PETRONAS.

Chan , Sin Wei (2016) Kinetic Studies on CO2 Capture using Rubber Seed Shell Activated Carbon. [Final Year Project]

Chandi, Hanis Nashrah (2016) Geology of Bekenu Area with the Emphasis of Black Shale Properties. [Final Year Project]

Chandran, Krittika (2016) Formulation of Demulsifier for Malaysia Crude oil. Masters thesis, Universiti Teknologi PETRONAS.

Chang, Louis Hou Wei (2016) Toxic Release Consequence Analysis for Inherently Safer Design. [Final Year Project] (Submitted)

Chaudhary, Pulkit (2016) Amplitude Independent Feature Extraction for Effective Speech Retrieval. Other thesis, Universiti Teknologi PETRONAS.

Che Engku Chik, Che Engku Mohd Khairi (2016) Towards Zero - Energy Commercial Offices by Utilizing Phase-Change Energy Storage Heat Exchanger to Replace Conventional Air Conditioning System. [Final Year Project] (Submitted)

Che Husain, Nurul Hazwani (2016) Separation and Fractionation of Phenolic Compound (Gallic Acid) from Selected Herbs and β-Glucans from Oat. [Final Year Project]

Che Jaafar, Nor Aini Aslah (2016) Modelling of Non-Equilibrium Water Condensation in Natural Gas Flowing Through Joule-Thomson Valve. [Final Year Project]

Che Suliman, Muhammad Syahmie (2016) RESIDUAL STRENGTH ANALYSIS OF CORRODED PIPELINE WITH INTERACTING DEFECTS SUBJECTED TO INTERNAL PRESSURE AND LONGITUDINAL COMPRESSIVE STRESS. [Final Year Project] (Submitted)

Cheah , Zong Yuan (2016) Nonlinear Model Predictive Control (NMPC) for Twin Rotor MIMO System (TRMS). [Final Year Project] (Submitted)

Chee , Pui San (2016) Robotics Rehabilitation for Training and Assessment of Upper Extremities. [Final Year Project] (Submitted)

Chen, Swee Keat (2016) Graphene Oxide-Catalyzed Subcritical Hydrothermal Liquefaction of Spirulina to Bio-Oil. [Final Year Project] (Submitted)

Chen , Kar Weng (2016) Enhancement Of Sludge Anaerobic Digestability By Fenton And Photo-Fenton Pretreatments. [Final Year Project] (Submitted)

Cheong Heng, Sean Lee (2016) Microfacies and Diagenesis of Setul Formation, Pulau Langkawi. [Final Year Project] (Submitted)

Cheow , Yeng Peng (2016) Development of Graphical User Interface (GUI) for Antenna Design. [Final Year Project] (Submitted)

Chi, Yew Lih (2016) Characterization and Properties of Powder Metallurgy Alumina-Iron and Alumina-Copper Ceramic Composites. [Final Year Project] (Submitted)

Chian, Cheah Zi (2016) Implementation and Justification of Innovated Three Lines Loop for Single and Multi- Phase Flows Studies. [Final Year Project] (Submitted)

Chiew, Chee Seng (2016) The Effect of Burning Temperature and Solution Concentration on the Characteristic of Silica Gel Extracted from Rice Husk Ash. [Final Year Project] (Submitted)

Chin, Eileen Wong Wee (2016) A Study on the Fatigue Assessment of Offshore Steel Catenary Riser. [Final Year Project] (Submitted)

Chong, Chao Sian (2016) Electrochemical Behavior of Natural Product as Green Inhibitor for Carbon Steel Corrosion in the Acidic Medium. [Final Year Project] (Submitted)

Chong , Kah Hin (2016) Optimizing the Performance of Wave Energy Converter for Power Generation. [Final Year Project]

Chow , Cai Wing (2016) Facies Discrimination Using Well Logs: Input For Seri Iskandar Geological Model. [Final Year Project] (Submitted)

Choy, Cheng Kong (2016) NOVEL SYNTHESIS METHOD AND CHARACTERISATION OF MCM–48. [Final Year Project] (Submitted)

Chuah, Lai Fatt (2016) Studies on Biodiesel Production in a Hydrodynamic Cavitation Reactor. Doctoral thesis, Universiti Teknologi PETRONAS.

Chuah, Kor Sing (2016) Design of Excitation Signals for System Identification. [Final Year Project] (Submitted)

Chung Yang, Nigel Chuah (2016) Investigating the Effect of Drilling Parameters and Mud Rheology for the Flow of Yield Power Law Fluid through Annulus. [Final Year Project] (Submitted)

Clarence , Yong Yee Hern (2016) Polymer-Surfactant Formulation Design Optimization For CO2 Mobility Control For Enhanced Oil Recovery Applications. [Final Year Project]

DOAN , VI KIM KHANH (2016) INTEGRATION OF METAHEURISTIC TECHNIQUE IN THERMO-ELECTRIC COOLING DEVICE TO ENHANCE EFFICIENCY AND PERFORMANCE. Masters thesis, Universiti Teknologi PETRONAS.

Dahlan, Mohamad Khalil (2016) Geology of Setap Shale Formation (Sector 7), Miri, Sarawak, Malaysia. [Final Year Project]

Dalhatu, Binta Usman (2016) The Determinants of Actual Usage Of E-Banking in Nigerian Islamic Bank. Doctoral thesis, Universiti Teknologi PETRONAS.

Danial, Hassan (2016) Study On Reduction In Heat Transfer From The Turbine To Compressor In A Turbocharger. [Final Year Project] (Submitted)

Daro, Chhorn (2016) COMPUTING THE MINIMUM DISTANCE BETWEEN A POINT TO A NURBS CURVE. [Final Year Project]

Desiga Vinayagam, Vimmal (2016) A Study on Rice Husk Briquette at Various Moisture Content for Energy Application. [Final Year Project] (Submitted)

Devan, Vaaghisen (2016) The Effect of Cross-linking Agents on Oil Palm Empty Fruit Bunch Fiber-Grafted Polyvinyl Alcohol (PVA) Hydrogel. [Final Year Project] (Submitted)

Dutsenwai, Hauwa Saleh (2016) Examining the Impact of Services Marketing Strategies on Customer Loyalty: a Case of UTP Students. Masters thesis, Universiti Teknologi PETRONAS.

ECB4313, ADVANCED ELECTRICAL MACHINES (2016) ECB4313 ADVANCED ELECTRICAL MACHINES. [Past Year Examination Question]

ELTAYEB, ABUZAR MOHAMED ABDALLA (2016) DEVELOPMENT OF SOLAR ENERGY HARVESTING FOR WIRELESS SENSOR. [Final Year Project] (Submitted)

EZECHI, EZERIE HENRY (2016) PERFORMANCE AND KINETICS OF AN INTEGRATED SUSPENDED AND SUBMERGED ATTACHED GROWTH BIOREACTOR TREATING INDUSTRIAL WASTEWATER. PhD. thesis, Universiti Teknologi PETRONAS.

Ean , Chin Teck (2016) Real-Time Capacity Monitoring for Lithium Polymer Batteries. [Final Year Project] (Submitted)

Earn, Evon Goh Eu (2016) Development of a New Beam System Based on the Pre-Stressing Concept of Bicycle Wheel. [Final Year Project]

Edmund, Jonathan Emmanuel (2016) Numerical Analysis of Crack Failure in Reinforced Thermoplastic Pipe (RTP). [Final Year Project] (Submitted)

Ee, Ming Fern (2016) Dispersion and Thermal Characteristics of Functionalized Nanoparticles in Oilbased Nanofluids. [Final Year Project] (Submitted)

Eisa Musa, Ahmed Yosreldin (2016) AEROSTAT EFFECT ON UAV STABILITY. [Final Year Project] (Submitted)

Eissa, Eissa Mubarak (2016) Selectivity Modeling Analysis of Natural Gas Binary Components via Adsorption on 5A Zeolites. [Final Year Project]

Ekaputra, Andhy Arya (2016) Effects of Solvents in Mitigating Wax Precipitation of Waxy Crude Oils. Masters thesis, Universiti Teknologi PETRONAS.

El-tahir Mustafa, Sara Galal El-din (2016) Development and Characterization of PES/ EDA-Functionalized TiO2 Mixed Matrix Membrane for CO2 Removal from Natural Gas. [Final Year Project] (Submitted)

Elamin Elsheikh, Islam Abdalla (2016) Implementation of Asymmetric Multiprocessing Support in a Real-Time Operating System. [Final Year Project] (Submitted)

Elanchelian, Sahriven (2016) Fire and Explosion Reduction Analysis for Inherently Safer Design. [Final Year Project] (Submitted)

Elwin , Lau Kieng Wui (2016) Air-Sea Flux Interaction Of CO2 Concentration Due To Oil And Gas Industry And Climate Change In Malaysia. [Final Year Project] (Submitted)

Embong, Rahimah (2016) Pozzolanic Properties of Hydrothermal Silica Gel Extracted from Sugarcane Bagasse using Eco-friendly Approach. Masters thesis, Universiti Teknologi PETRONAS.

Evelynlove, Fosu-Duah (2016) Surface Characteristics and Charging Potentials of Selected Shales from the Setap Formations, Onshore and Offshore Sarawak, Malaysia. Masters thesis, Universiti Teknologi PETRONAS.

Ewan, Amirul Hani (2016) Extended Elastic Impedance Analysis for Rock Properties Prediction from Seismic Data. [Final Year Project]

FATT, CHUAH LAI (2016) Parametric Studies on Biodiesel Production in a Hydrodynamic Cavitation Reactor. PhD. thesis, Universiti Teknologi PETRONAS.

FENG , YING XING (2016) MOOD STATES ON WORKING MEMORY AND BRAIN HAEMODYNAMIC RESPONSE USING OPTICAL TOPOGRAPHY MODALITY. Masters thesis, Universiti Teknologi PETRONAS.

FOSU-DUAH, EVELYNLOVE (2016) SURFACE CHARACTERISTICS OF SELECTED SHALES FROM SETAP FORMATION, SARAWAK, MALAYSIA. Masters thesis, Universiti Teknologi PETRONAS.

Faili, Zahra (2016) Development of Low Cost Heart Rate Monitoring Device and Classification Technique Using Fuzzy Logics Algorithm. [Final Year Project] (Submitted)

Faris, Muhamad Arif (2016) CREEP ASSESSMENT OF REFORMER TUBE BY ULTRASONIC ATTENUATION AND MICROSTRUCTURE ANALYSIS. [Final Year Project]

Febrianto, Rifqi Andi (2016) Process Simulation: Condensate Recovery and Stabilization in Associated Gas Field. [Final Year Project] (Submitted)

Feng, Ying Xing (2016) Mood States on Working Memory and Brain Haemodynamic Response using Optical Topograhy Modality. Masters thesis, Universiti Teknologi PETRONAS.

Foo, Mei Yih (2016) Synthesis, Characterization of MOF-200/Graphene Oxide Composite For Static Adsorption Performance of Carbon Dioxide. [Final Year Project] (Submitted)

GARG, SAHIL (2016) PHYSICOCHEMICAL PROPERTIES AND SOLUBILITY STUDY OF C02 IN AQUEOUS SODIUM AND POTASSIUM SALTS OF L-PHENYLALANINE. Masters thesis, Universiti Teknologi PETRONAS.

GHAZALI, NUR AFIFAH (2016) Third Harmonic Filter Design in Mitigating High Current At the Generator Neutral. [Final Year Project] (Submitted)

GILANI, SYED EHSAN-UL-HAQ (2016) HEAT TRANSFER ENHANCEMENT OF A FREE CONVECTIVE SOLAR AIR HEATER USING CONICAL PIN TURBULATORS. Masters thesis, Universiti Teknologi PETRONAS.

Gabriel , Wong Siong Tung (2016) Integrated Pilot Plant for a Complete Decentralized Sewage Treatment. [Final Year Project] (Submitted)

Gan , Kai Han (2016) Wave Transmission Characteristics of the Rapidly Installed Modular Floating Breakwaters. [Final Year Project] (Submitted)

Ganapathy, Sarvish (2016) Photocatalytic Degradation of Ionic Liquid in Wastewater under Visible Light. [Final Year Project] (Submitted)

Ganesan, Thipashini (2016) Sorption and Desorption Studies of Lead(II) Using Sawdust as Potential New Sorbent. [Final Year Project]

George, Jerin Mathew (2016) Incorporation of Aging Effects of Piles into the Structural Reliability Analysis of Offshore Jacket Platforms. Masters thesis, Universiti Teknologi PETRONAS.

Gobalu, Mohhan (2016) Study of Semanggol Formation: Comparison of Porosity and Permeability in Different Depositional Environments. [Final Year Project]

Goh, Shuen Shyan (2016) Component Reliability Model for Jacket Structures in Malaysia Offshore Waters. Masters thesis, Universiti Teknologi PETRONAS.

Goh, Kheng Seng (2016) Neural Network Modelling for Heat Exchanger. [Final Year Project] (Submitted)

Goh , Wei Min (2016) SUPERCRITICAL EXTRACTION OF VALUE ADDED CHEMICAL FROM GAHARU. [Final Year Project]

Gwee , Yong Ling (2016) Study on the Interfacial Curvature of Oil-Water Two Phase System subjected to Polymeric Additives. [Final Year Project]

HABIB, IFFAT (2016) CONGESTION CONTROL AND LOAD BALANCED ROUTING USING DYNAMIC PROGRAMMING FOR WIRELESS AD HOC NETWORKS. Masters thesis, Universiti Teknologi PETRONAS.

HAMDAN, MUHAMAD HARITH (2016) System Integration and Experimentation for Energy Management System (EMS) Controller for Split-Parallel HEV. [Final Year Project] (Submitted)

HAMZAH, HAMMUZAMER IRWAN (2016) A NEW DIGITAL MUSIC ARCHIVING MODEL BASED ON A NEW COGNITIVE AND CONSTRUCTIVE LEARNING APPROACH. PhD. thesis, Universiti Teknologi PETRONAS.

HANOUNEH, SAMER (2016) EFFECTS OF MULTIMEDIA CONTENTS ON THE BRAIN DURING MEMORY RETENTION AND RECALLING PROCESS. Masters thesis, Universiti Teknologi PETRONAS.

HASHIM, MOHD ASYRAF (2016) AUTOMATED IP CAMERA: ATTENDANCE BASED APPLICATION USING FACIAL RECOGNITION. [Final Year Project] (Submitted)

HASSAN, ASIYAHTUL HUSNA (2016) Sedimentology and Structural Geology of Ayer Hitam area, Johor. [Final Year Project]

HATTA, KHAIRUL ANWAR (2016) ESTABLISHMENT OF SOIL STRENGTH PARAMETERS AND SELECTED INDEX PROPERTIES USING ELECTRICAL RESISTIVITY METHOD. Masters thesis, Universiti Teknologi PETRONAS.

HONG, KEE RI (2016) Structural Integrity of Offshore Platform Duyong (PMO), Kinabalu(SBO) and Tukau (SKO) Under Seismic Loadings in Malaysian Offshore. [Final Year Project] (Submitted)

HOSSEINI, SEYEDNOOROLDIN· (2016) THE EFFECTS OF BRINE COMPONENTS ON WETTABILITY ALTERATION OF CARBONATES DURING SURF ACT ANT FLOODING. PhD. thesis, Universiti Teknologi PETRONAS.

HU, CHEE KIONG (2016) CFD Modeling of Trickle-Bed Reactors for Catalytic Hydropurification Processes. [Final Year Project] (Submitted)

HUSSEIN, KARAMA SAEED AL-JABERI (2016) Investigation the Properties of Ultra High Performance Concrete - Compressive Strength. [Final Year Project]

HUSSEIN ELHASSAN, MOHAMED SALAHELDIN (2016) THE STUDY OF THE STRIPPING PROPERTIES OF BITUMINOUS MIXTURES CONTAINING DIFFERENT AGGREGATE TYPES. [Final Year Project] (Submitted)

Habib, Amir Izzuddin Hasani (2016) Performance of Glass Fibre Reinforced Polymer (GFRP) Grating After Ageing for Offshore Structure Application. Masters thesis, Universiti Teknologi PETRONAS.

Habib, Iffat (2016) Congestion Control and Load Balanced Routing using Dynamic Programming for Wireless Ad Hoc Network. Masters thesis, Universiti Teknologi PETRONAS.

Haji Hamzah, Muhamad Syamim (2016) Study of Crude Palm Oil Diesel Blend Emission on Diesel Engine. [Final Year Project] (Submitted)

Haji Rosihan, Siti Salmiah (2016) Corrosion Study on X65 Steel with Wax Deposition under Thermal Effect. [Final Year Project] (Submitted)

Hamada, Dah (2016) Drive system design for personal electric vehicle (PEV). [Final Year Project] (Submitted)

Hamid, Muhammd Faris (2016) Simulation Studies of Biomass Gasification System. [Final Year Project]

Hamidi, Sheeril Hafiza (2016) FLY ASH BASED GEOPOLYMER MORTAR(FRESH & HARDENED PROPERTIES). [Final Year Project] (Submitted)

Hamizol, Muhammad Syahmi (2016) Extraction for Continuos Cellulose Fiber from Mengkuang Leaves: The Influence of Extraction Process Paremeters. Masters thesis, Universiti Teknologi PETRONAS.

Hamzah, Mohammad Farid (2016) A Study On The Function Of Thermoplastic Starch As Matrics In Biocomposite. [Final Year Project] (Submitted)

Hamzah, Muhamad Hakimin (2016) PROVENANCE STUDY ON SANDSTONE OF KATI FORMATION. [Final Year Project]

Han , Fon Yee (2016) Intrinsic Transesterification Rate of Vegetable Oils. [Final Year Project]

Hang , Li Meng (2016) Performance of Linear Model Predictive Control (MPC) On the Control of a Nonlinear Continuous Stirred Tank Reactor (CSTR). [Final Year Project]

Harolanuar, Nurul Ain (2016) Prospect Mapping of Kerry Field, Taranaki Basin. [Final Year Project]

Haron, Hasrizal (2016) Integrated Matrix of 5S and Autonomous Maintenance for the Processing Industry. [Final Year Project] (Submitted)

Haron, Nur Atikah (2016) Behaviour of Electrical Resistivity with Soil Strength Parameters by Varying the Particle Size Proportion for Mixed Sand and Silt Samples. [Final Year Project] (Submitted)

Hasan, Nur Liyana (2016) Direct Hydrogen Production via Methane Decomposition. [Final Year Project]

Hassan, Saima (2016) Hybrid Learning Algorithms For Interval Type-2 Fuzzy Logic System to Model Nonlinear Dynamic Systems. Doctoral thesis, Universiti Teknologi PETRONAS.

Hassan, Abdullah Fahmi (2016) Evaluation of Hydrogen Embrittlement on Pipeline Steel Due to Cathodic Protection Overpotential. [Final Year Project] (Submitted)

Hassan, Esra Ali (2016) Smart Glasses for the Visually Impaired People. [Final Year Project] (Submitted)

Hassan Eltayeb, Yassin Abdelrasoul (2016) Indoor Simultaneous Localization and Mapping (SLAM) Using Laser Range Finder. [Final Year Project] (Submitted)

Hassin @ Hashim, Hasmiera (2016) Case Study: Optimisation of Federal Land Development Authority (FELDA) Sahabat Supply Chain Management Using P-graph Approach. [Final Year Project] (Submitted)

Haur, Lim Chun (2016) Study on the Effect of Ultrasonic Wave Amplitude on Deemulsification of Crude Oil to enhance Production Process. [Final Year Project] (Submitted)

Hian, Kueh Seow (2016) Airflow study of a Split-Type outdoor unit subjected to near wall effect using Computational Fluid Dynamics (CFD)simulation. [Final Year Project] (Submitted)

Hla Myint, Kyaw Thiha (2016) Structural Integrity Re-Use Assessment for Fixed Structures. [Final Year Project] (Submitted)

Hong, Ho Yik (2016) Burst Strength Analysis of Composite Pressure Vessel using Finite Element Method. [Final Year Project] (Submitted)

Hsien Yoong, John Voon (2016) Effect of the Length of a Torpedo Anchor on Its Vertical Holding Capacity. [Final Year Project] (Submitted)

Huat, Beh Yong (2016) Measurement of Water in Oil Pipelines using Capacitance Method. [Final Year Project] (Submitted)

Husni, Hasrul (2016) Utilization of Solid Biomass Waste (Oil Palm Frond) as Low-Cost Adsorbent for Janus Green B Dye Removal. [Final Year Project]

Hussein, Mohd Al Nazirul Mubin (2016) Electromagnetic Driven Wiper: Conceptual Study and Analysis. [Final Year Project] (Submitted)

Hussein Shah, Mohamad Izzudin (2016) Study of Micro-Explosion Phenomena of Various Water-in-Biodiesel Emulsion (WiBE) Using Visualization Technique. [Final Year Project] (Submitted)

Hussin, Nur Ain Nabilah (2016) Thermal Analysis of Semiconductor: Peak Junction Temperature Prediction. [Final Year Project] (Submitted)

IBRAHIM MOHMMED, ABDALELLAH OMER (2016) THE EFFECT OF SLUG TWO-PHASE FLOW ON THE MECHANICAL STRESS BEHAVIOUR OF RIGID PIPELINES. PhD. thesis, Universiti Teknologi PETRONAS.

IFTIKHAR , BILAL MAKKI (2016) IMPACT OF WORK READINESS ON CAREER SELF-EFFICACY AND CAREER EXPLORATION: A TWO-STEP MODEL. Masters thesis, Universiti Teknologi PETRONAS.

IRSHAD, KASHIF (2016) EXPERIMENTAL STUDY OF THERMOELECTRIC AIR DUCT AND PHOTOVOLTAIC SYSTEM FOR ENERGY EFFICIENT BUILDING DEVELOPMENT. PhD. thesis, Universiti Teknologi PETRONAS.

IRSHAD, MUHAMMAD IMRAN (2016) SYNTHESIS AND CHARACTERIZATION OF MAGNETIC METALLIC NANOWIRES AND THEIR NOVEL HYBRID NANOSTRUCTURES. PhD. thesis, Universiti Teknologi PETRONAS.

IRSHAD, SHAFAQ (2016) A DESIGN AND EVALUATION FRAMEWORK FOR ENHANCING USER EXPERIENCE OF MOBILE AUGMENTED REALITY. Masters thesis, Universiti Teknologi PETRONAS.

ISA, FAEZAH (2016) DEVELOPMENT OF RATE-BASED NON EQUILIBRIUM C02 REMOVAL AT ELEVATED PRESSURE FROM NATURAL GAS. Masters thesis, Universiti Teknologi PETRONAS.

ISMAIL, MOHAMED HAKAM HUSAIRI (2016) RESIDUAL STRENGTH ANALYSIS OF CORRODED PIPELINE WITH SINGLE DEFECT SUBJECTED TO INTERNAL PRESSURE AND LONGITUDINAL COMPRESSIVE STRESS. [Final Year Project] (Submitted)

Ibrahim, Maziah (2016) A Study Of Shock Absorption Performance Of Tapioca Starch As Cushioning Material For Packaging. [Final Year Project] (Submitted)

Ibrahim, Mohamad Haidar (2016) Flexible and Stretchable 3D Graphene/PDMS/PET composite film for strain sensing application. [Final Year Project] (Submitted)

Ibrahim, Muhamad Farhan (2016) Failure Analysis of Hacksaw Blade. [Final Year Project]

Ibrahim Mohmmed, Abdalellah Omer (2016) Effect of Slug Two-phase Flow on Fatigue of Pipe Material. Doctoral thesis, Universiti Teknologi PETRONAS.

Idris, Muhammad Khairi (2016) Effect of Sensor-Actuator Non-collocation to Dynamic Response of Flywheel Energy Storage System Supported by Active Magnetic Bearing. [Final Year Project] (Submitted)

Idrus, Natasha (2016) Application of In-Vessel Composting for Yard Waste Produced in Cameron Highlands. [Final Year Project] (Submitted)

Imam, Abdullahi Abubakar (2016) An Efficient Data Synchronization Model for Heterogeneous Mobile Device Databases and Server-Side Database. Masters thesis, Universiti Teknologi PETRONAS.

Irshad, Muhammad Imran (2016) Synthesis and Characterization of Magnetic Metallic Nanowires and their Novel Hybrid Nanostructures. Doctoral thesis, Universiti Teknologi PETRONAS.

Isa, Faezah (2016) Development of Pressure Modification Index-f in Rate based Model for C02 Removal at Elevated Pressure. Masters thesis, Universiti Teknologi PETRONAS.

Ismail, Norzatul Natrah (2016) Optimizing Volunteer-based Grid scheduling with Thermal Profile Using Genetic Algorithm. Masters thesis, Universiti Teknologi PETRONAS.

Ismail, Mohd Fareid Fareez (2016) Study of Automatic Balancing for Flywheel-based Kinetic Energy Recovery System (KERS). [Final Year Project]

Ismail, Muhammad Harris Fahmi (2016) Segmentation of Synthetic Aperture Radar (SAR) Image Using Graphcut. [Final Year Project] (Submitted)

Ismail, Siti Syahirah (2016) Investigation of Performance On Low and High Temperature Nitrided 316L Austenitic Stainless Steel On Impact Test and Scratch Test. [Final Year Project] (Submitted)

Israr, Muhammad Israr (2016) Temporal and Spatial Characterization of Slug Flow in Pipelines using a Simultaneous PIV-LIF Technique. Doctoral thesis, Universiti Teknologi PETRONAS.

Istab, Nurul Azlan (2016) SEGMENTATION OF PROSTATE IN MRI IMAGES USING GRAPH-CUT SEGMENTATION. [Final Year Project] (Submitted)

Ivan Tan, Sheng Wei (2016) Intelligent Microphone Stand. [Final Year Project] (Submitted)

Izer, Abdullah Fahmi (2016) Prediction and Analysis of Operating Conditions of Industrial Methanol Synthesis Reactor Using Artificial Neural Network-Based Model. [Final Year Project] (Submitted)

JAMAL, IZZAT AMIR ZAFRI (2016) PERFORMANCE OF FREE-PISTON LINEAR GENERATOR BY USING COMPRESSED AIR. [Final Year Project] (Submitted)

JAMALUDDIN, FATIN NABILA (2016) CORRELATION ANALYSIS BETWEEN CHILLED WATER AND ELECTRICAL POWER DEMAND BASED ON GAS DISTRICT COOLING PLANT OPERATIONS. [Final Year Project] (Submitted)

JAYA RAMAN, THINESHRAAJ (2016) Study of Preferential Weld Corrosion in X52 Mild Steel with the Presence of Acetic Acid. [Final Year Project] (Submitted)

JAYAID, MUHAMMAD YASAR (2016) EFFECT OF WING FORM AND WATER CURRENT ON THE DYNAMICS OF AN UNDERWATER GLIDER. PhD. thesis, Universiti Teknologi PETRONAS.

JOHARRY, SITI HAJAR (2016) ANALYSIS AND CLASSIFICATION OF PAP SMEAR CELLS USING SHAPE FEATURES. [Final Year Project]

Jaini, Azmeer Zainurin (2016) Evaluation of “Rust Converter Paint” Mechanism Under Simulated Field Condition. [Final Year Project] (Submitted)

Jamal, Norhidayu (2016) Hydrogen Production Via Carbon Dioxide Reforming. [Final Year Project] (Submitted)

Jamaludin, Muhammad Ikhwan (2016) Development of Spectral Signature Vegetation Stress for Hydrocarbon Microseepage Detection using Spectroscopy. Masters thesis, Universiti Teknologi PETRONAS.

Jamil, Muhammad Akmal (2016) Study on the Effect of Syngas Fuel Temperature to the Performance of a Small-Scale Electrical Power Generator. [Final Year Project] (Submitted)

Jan, Amin (2016) Evaluating Economic Sustainability Profile of the Islamic Banking Industry: Evidence from the World's Top Five Islamic Banking Countries. Masters thesis, Universiti Teknologi PETRONAS.

Javaid, Muhammad Yasir (2016) Effect of Tappered and Rectangular Wing Forms on The Dynamic of an Underwater Glider. Doctoral thesis, Universiti Teknologi PETRONAS.

Jaya, Mohd Rafaei (2016) Dry Deposition Techniques for Biobased Diabetic Inhibitor. [Final Year Project] (Submitted)

Jaya Krishna, Thasarathan (2016) Extraction of Natural Dyes for the Application in Dye Sensitized Solar Cells (DSSCs). [Final Year Project] (Submitted)

Jayabalan, Jayakumaresh (2016) Preparation and Characterization of KIT-6 / Polysulfone Mixed Matrix Membrane. [Final Year Project] (Submitted)

Jayakumar, Khuganeswaran (2016) Investigation of Organic Rankine Cycle Using Different Working Fluids for Conversion of Low Grade Heat Sources. [Final Year Project] (Submitted)

Jinal Ahbidin, Muhammad Firdaus (2016) A STUDY ON THE MECHANICAL EFFECTS OF GAS NITRIDING ON ALUMINIUM ALLOY 6061 FOR THE USE IN MOBILE PHONE CASING. [Final Year Project] (Submitted)

Jing Hang, Eric Teng (2016) Geology and Sedimentology of Transect I – East Face, Central Gunung Semanggol, Bukit Merah, Perak. [Final Year Project] (Submitted)

Jugindar Singh, Ashwin Pal Singh (2016) Effect of Ionic Liquid Pretreatment On the Moisture Absorption Kinetics of Oil Palm Biomass Based Composites. [Final Year Project] (Submitted)

Jumali, Siti Nur Izzaidah (2016) Reliability, Availability and Maintainability (RAM) Analysis for Offshore High Pressure Compressor. [Final Year Project] (Submitted)

KAMAL IQBAL, NUR HIDAYAH (2016) Model-plant Mismatch Detection, Isolation and Estimation using Multivariate ARMAX Mismatch Modeling. Masters thesis, Universiti Teknologi PETRONAS.

KANESAN, KAARTHIK (2016) Thermal maturation and stratigraphy of the black shale beds in Kanthan, Kinta Valley. [Final Year Project]

KANNA DASAN, YALEENI (2016) Isolation and characterization of Nanocrystalline cellulose based nanobiocomposite from oil palm biomass with potential application in packaging. Masters thesis, Universiti Teknologi PETRONAS.

KEE, TAN SIOK (2016) STAKEHOLDERS' ISSUES AND ANALYSIS OF CARBON CAPTURE AND STORAGE (CCS) TECHNOLOGY ADOPTION IN MALAYSIA. Masters thesis, Universiti Teknologi PETRONAS.

KEE, WONG MEE (2016) RAMAN SPECTROSCOPIC STUDY OF VAPOR LIQUID EQUILIBRIUM OF CARBON DIOXIDE ABSORPTION IN AQUEOUS MONOETHANOLAMINE. PhD. thesis, Universiti Teknologi PETRONAS.

KEONG, WOO TZE (2016) DEVELOPMENT AND ANALYSIS OF HIGH SPEED DRILLING INDUCED DELAMINATION IN GLASS FIBER REINFORCED POLYMER. PhD. thesis, Universiti Teknologi PETRONAS.

KHALID, HESHAM (2016) Study and Analysis of Power MOSFET Characteristics in Radiation Environment. [Final Year Project] (Submitted)

KHAN, MUHAMMAD IRFAN (2016) DEVELOPMENT OF GEOPOLYMERS USING FLY ASH AND NANO SILICA FROM PALM ASH FOR COATING STUDY. Masters thesis, Universiti Teknologi PETRONAS.

KHAN, MUHAMMAD MOHSIN (2016) DEVELOPMENT OF A FUZZY LOGIC BASED MODEL FOR CORROSION UNDER INSULATION IN PIPING SYSTEMS. Masters thesis, Universiti Teknologi PETRONAS.

KHAN, TAIMUR (2016) DEVELOPMENT OF RICE HUSK-BASED ADSORBENTS FOR METAL FINISHING WASTEWATER TREATMENT. PhD. thesis, Universiti Teknologi PETRONAS.

KHAW , HAN PING (2016) Characterization and Treatment of River Water with biopolymer: A Comparison Study with Alum. [Final Year Project] (Submitted)

KIM , TSHAI HOE @ CHAI HOE (2016) GREEN AMMONIA AND UREA SYNTHESIS VIA MAGNETIC INDUCTION METHOD USING ALIGNED HEMATITE NANOWIRES. Masters thesis, Universiti Teknologi PETRONAS.

KUEH, BENJAMIN WEI BIN (2016) Adsorption of Carbon Dioxide on Activated Carbon Derived from Asphaltene & Palm Kernel Shell Mixture. [Final Year Project] (Submitted)

Kamal Iqbal, Nur Hidayah (2016) Model-Plant Mismatch Detection, Isolation and Estimation using Multivariate ARMAX Mismatch Model. Masters thesis, Universiti Teknologi PETRONAS.

Kamalruzzaman, Muhammad Badrulnizam (2016) Compression Behaviour of Black Shale and Weathered Chert in Pokok Sena, Kedah. [Final Year Project]

Kamalruzzaman, Muhammad Fadhullah (2016) Prevention of Evaporative Water Loss in Water Reservoir Dam. [Final Year Project]

Kamaruddin, Muhammad Khairulsyamim (2016) Iris Recognition As Biometric Authentication. [Final Year Project] (Submitted)

Kamarudin, Mohamad Aiman Syafiq (2016) The Comparison of Bearing Capacity Calculation Obtained based on SPT-N from Seismic Survey against Strength Parameters (c’ and φ) value from Soil Drilling. [Final Year Project]

Kamarudin, Zul Atiff (2016) Battery Management System for Wireless Mobile Charging. [Final Year Project] (Submitted)

Kamarudzaman, Nur Zahidah (2016) Prediction of Flow Resistance using Artificial Neural Network (ANN) in Natural Vegetated Channel. [Final Year Project]

Kamarul Bahrin, Nurul Syahirah (2016) Modelling Pore Water Pressure Using Sigmoid Kernel Function. [Final Year Project]

Kang , Gim Pin (2016) Automatic Recognition of Handwritten Score Digits. [Final Year Project] (Submitted)

Kanna Dasan, Yaleeni (2016) Isolation and Characterization of Nanocrystalline Cellulose and Its Nanobiocomposite Packaging Application. Masters thesis, Universiti Teknologi PETRONAS.

Karar Balla, Ola Babiker (2016) Modeling of Equilibrium Water Condensation in Natural Gas Flowing Through Joule Thompson Valve. [Final Year Project]

Kardan, Ramtin (2016) Combustion Characteristics of a Curved-Cylinder Crank-Rocker Engine. [Final Year Project] (Submitted)

Kenishan, Yakeshwaran (2016) Removal of Chromium from Wastewater using Activated Eggshells. [Final Year Project] (Submitted)

Khaidzi, Sharifah Nur Ainiza (2016) EFFECT OF WINDSPEED TO WAVE HEIGHT ON CONTINENTAL SHELF MALAYSIA. [Final Year Project] (Submitted)

Khalid, Muhamad Fazillah (2016) Iridium Oxide pH Microsensor Based on Stainless Steel Wire for pH Mapping on Metal Surface. [Final Year Project]

Khan, Humera (2016) An Empirical Study of the Factors Influencing Continuance Intention to use Airline Websites. Doctoral thesis, Universiti Teknologi PETRONAS.

Khan, Muhammad Hammad (2016) Experimental Investigation to Modify the Fanger's Thermal Comfort Model using Blood Pressure as Bio-Maker in the Tropical Climate. Masters thesis, Universiti Teknologi PETRONAS.

Khan, Muhammad Irfan (2016) Development of Geopolymers using Fly Ash and Nano Silica from Palm Ash for Coating Study. Masters thesis, Universiti Teknologi PETRONAS.

Khan, Taimur (2016) Performance of Rice Husk-Based Adsorbents for Metal Finishing Wastewater Treatment. Doctoral thesis, Universiti Teknologi PETRONAS.

Khanh, Doan Vi Kim (2016) Integration of Meta-heuristic Technique in Thermo-electric Cooling Device to Enhance Efficiency and Perfomance. Masters thesis, Universiti Teknologi PETRONAS.

Khoa, Truong Hoang (2016) Application of Mean-Variance Mapping Optimization Techniques for Non-convex Economic Dispatch Problems. Masters thesis, Universiti Teknologi PETRONAS.

Khoo, Boo Kean (2016) Numerical Simulation and Experimental Study of Inductor Fault for Different Winding Contours. Doctoral thesis, Universiti Teknologi PETRONAS.

Kobal, Vinod Kanna (2016) Processing of Kapok Fiber into Biodegradable Pellets for Efficient Oil Absorption. [Final Year Project] (Submitted)

Konjing, Zainey (2016) Paleoenvironmental and Paleogeographic Reconstruction of the Upper Oligocene-middle Miocene Nyalau Formation, South Bintulu,Sarawak. Masters thesis, Universiti Teknologi PETRONAS.

Krishnamoorthy, Shasidaran (2016) Optimum Welding Parameters for Pipeline Welding Using Artificial Neural Network. [Final Year Project] (Submitted)

Krishnan, Yoghender (2016) 3D Fish Culture. [Final Year Project] (Submitted)

Krishnan Moorthy, Vivendran (2016) Removal of Nickel from Aqueous Solution using Coconut Fiber Char as Low Cost Adsorbent. [Final Year Project] (Submitted)

Ku Yusoff, Tengku Ahmad Imran (2016) Sedimentology and Geomorphology Analysis of Coastal Area Along Pantai Penarik, Terengganu before and During Northeast Monsoon Season. [Final Year Project]

Kuanasealan, Keshveeni (2016) Synthesis and Characterization of Coconut Pith Char Adsorbents for Carbon Dioxide Capture. [Final Year Project] (Submitted)

Kung Wen, Justin Lee (2016) Design of ultralow noise and THD low pass filter for audio analyzer. [Final Year Project] (Submitted)

LEOW , WEI NENG (2016) DECENTRALISED SEWAGE TREATMENT USING ANAEROBIC BAFFLED HORIZONTAL WETLAND SYSTEM. [Final Year Project] (Submitted)

LOO , MAN YEE (2016) Solid Fuels From Algae Residues By Biomass Densification. [Final Year Project]

Lai, Chun Hoe (2016) Investigation of Hybrid Solvents for Absorption of CO2. [Final Year Project] (Submitted)

Lam, Jen Hui (2016) SURFACE MODIFIED NANOPARTICLES FOR EOR APPLICATIONS. [Final Year Project] (Submitted)

Lau, Jin Jie (2016) Effect of Ionic Liquid Pretreatment on the Thermal Degradation Kinetics of Oil Palm Biomass Based Composites. [Final Year Project] (Submitted)

Lau, Kevin (2016) Comparative Study of Different Coil Geometries for Wireless Power Transfer. [Final Year Project] (Submitted)

Lau , Kah Mun (2016) Investigation of Heat Transfer Losses to the Combustion Chamber Wall of a Linear Generator Engine. [Final Year Project] (Submitted)

Law , Tzee Sien (2016) Lean Process Improvement on Local Hospitals. [Final Year Project] (Submitted)

Lee, Hsiu Eik (2016) Development of Conceptual Spread Mooring Design Tool for Ship Shaped Offshore Platforms. Masters thesis, Universiti Teknologi PETRONAS.

Lee , Pei Ting (2016) Optimization of Supercritical CO2 Extraction of Essential Oil from Neem Leaves Using Response Surface Methodology. [Final Year Project]

Lee , Weng Soon (2016) CFD Simulation Of The Influence Of Humidity On Explosive Behaviour of Aluminium Nanoparticle. [Final Year Project]

Leong, Siew Yoong (2016) Biodiesel Production using Hermetia Illucens (Black Soldier Fly) Prepupae Biomass through Organic Waste Upcycling. Doctoral thesis, Universiti Teknologi PETRONAS.

Lidu @ Serirama, Seri Rahimah (2016) Retrofit Approach in Palm Oil Refining by Implementing Pinch Analysis (A Case Study at Sahabat Oil Products (SOP), Lahad Datu, Malaysia). [Final Year Project]

Lieng , Kee Wong (2016) PARAMETRIC STUDY OF REINFORCED CONCRETE BEAM SUBJECTED TO IMPACT LOADING USING FINITE ELEMENT ANALYSIS. [Final Year Project] (Submitted)

Lim, Lam Thye (2016) Hydrogen Adsorption Study using Functionalized Carbon Nanomaterials. [Final Year Project] (Submitted)

Lim, Wen Khai (2016) Synthesis of Humic Acid from UTP Vermicompost at Different C/N Ratio for Electricity Generation. [Final Year Project] (Submitted)

Lim , Susin (2016) Study on the Dispersion Characteristics of Thermal Oil Based Nanofluids Using Different Techniques. [Final Year Project]

Liong, Phumphairin (2016) Preparation and Characterization of Alkaline Catalyst Waste from Eggshell for Transesterification Reaction. [Final Year Project] (Submitted)

Logambigai, Perichiappan (2016) Physicochemical Characterization of Lignin Recovered from Agriculture and Forestry Biomass. [Final Year Project]

Loo, Sheau Huey (2016) Integrated Static Reservoir Modeling of Yan’an Formation, X-area, Ordos Basin, China. [Final Year Project] (Submitted)

Loo , Sheau Huey (2016) Integrated Static Reservoir Modeling of Yan’an Formation, X-area, Ordos Basin, China. [Final Year Project]

Luka, Mawa Patrick (2016) IMPROVEMENT OF GEOPHONE SENSITIVITY AT LOWER FREQUENCY (1 to 8HZ). [Final Year Project]

MAHAMUD, AHMAD HAFIZUDDIN (2016) STRUCTURAL GEOLOGY AND MINERALOGY OF THE SEMANTAN FORMATION (MIDDLE-UPPER TRIASSIC) AROUND TEMERLOH, PAHANG. [Final Year Project]

MALIK, UMAIRIA (2016) SEISMIC BOUNDARY REFLECTION APPROXIMATION BY AUTOREGRESSION AND RADON-FOURIER. Masters thesis, Universiti Teknologi PETRONAS.

MANNAN, SOBIA (2016) INNOVATION DIFFUSION OF GREEN FERTILIZER TECHNOLOGY AMONG PADDY FARMERS IN MALAYSIA. Masters thesis, Universiti Teknologi PETRONAS.

MAT DAGANG, NURUL SAFIAH (2016) C02 CAPTURE USING SOLID SUPPORTED IONIC LIQUID [HMIM][TF2N]. Masters thesis, Universiti Teknologi PETRONAS.

MATHUR, NIRBHAY (2016) VISUALIZE VULNERABILITY MAP OF DENGUE INCIDENCES IN SELANGOR STATE USING GAUSSIAN MIXTURE MODEL. Masters thesis, Universiti Teknologi PETRONAS.

MAZLAN, MOHAMMAD AMIR FIRDAUS (2016) BATCH AND CONTINUOUS PYROLYSIS OF RUBBER WOOD SAWDUST FOR PRODUCTION OF BIO-ENERGY AND BIO-CHEMICALS. Masters thesis, Universiti Teknologi PETRONAS.

MD DESA, MUHAMMAD AMIN (2016) APPLICATION OF SHAPE MEMORY ALLOY IN REINFORCED CONCRETE STRUCTURE. [Final Year Project] (Submitted)

MD SHAKUR, NUR FATEHAH (2016) Development of Wireless Transmission Device For Current Detector for AC Motor. [Final Year Project] (Submitted)

MEHMOOD, TAHIR (2016) DYNAMIC ANT COLONY SYSTEM WITH THREE LEVEL UPDATE FEATURE SELECTION FOR INTRUSION DETECTION. Masters thesis, Universiti Teknologi PETRONAS.

MEMON, MUHAMMAD BURHAN (2016) BEHAVIOR OF ELECTRICAL RESISTIVITY AGAINST SHEAR STRENGTH AND INDEX PROPERTIES FOR COMPACTED LATERITE SOIL. Masters thesis, Universiti Teknologi PETRONAS.

MENGAL, ALI NAWAZ (2016) FATIGUE LIFE PREDICTION OF BASALT- CARBON HYBRID COMPOSITE FOR WIND TURBINE ROTOR BLADES. PhD. thesis, Universiti Teknologi PETRONAS.

MKAYES, ABED ALRAHMAN (2016) ELLIPSE - BASED TEMPLATE MATCHING FOR CELL IDENTIFICATION IN FLUORESCENCE MICROSCOPE IMAGES. Masters thesis, Universiti Teknologi PETRONAS.

MOHAMED HAFEZ, NEHAL FAROUK (2016) ECOTOXICITY STUDIES OF PYRIDINIUM BASED IONIC LIQUIDS. Masters thesis, Universiti Teknologi PETRONAS.

MOHAMED HISHAM, MOHAMED SYAKIR (2016) A STUDY OF PHYSICAL PROPERTIES & SHOCK ABSORPTION ABILITIES OF STARCH POLYMER FOAM AS CUSHIONING MATERIAL FOR PACKAGING. [Final Year Project] (Submitted)

MOHAMED OSMAN, MOHAMED ABDELRAHIM (2016) MULTIVARIABLE CLOSED-LOOP SYSTEM IDENTIFICATION USING ITERATIVE LEAKY LEAST MEAN SQUARES METHOD. PhD. thesis, Universiti Teknologi PETRONAS.

MOHAMED YOUSUFF, FARWIZAH (2016) WATER WAVE AND ENERGY GENERATOR. [Final Year Project] (Submitted)

MOHAMMED ABOUD MAFAILEH, ALA (2016) Effectiveness of Safety management practice in construction projects. [Final Year Project]

MOHD AKHIR, NADIRA WAHIDA (2016) GENERAL GEOLOGY AND ENGINEERING GEOLOGY, KM76 - KM61 LOJING-GUA MUSANG ROAD, KELANTAN. [Final Year Project]

MOHD AZAM, MOHD AMIRUL NASRIN (2016) GENERAL GEOLOGY AND ENGINEERING GEOLOGY AT KM40-KM30 LOJING-GUA MUSANG ROAD, KELANTAN. [Final Year Project]

MOHD LAZI , MOHAMAD HAFIDZ (2016) A COMPARISON STUDY OF BIOPOLYMER WITH ALUM IN THE TREATMENT OF WATER. [Final Year Project] (Submitted)

MOHD MUKHTAR, MUHAMMAD ZAID (2016) ESTIMATION OF POLLUTANT CONCENTRATIONS AT ROAD INTERSECTION IN SERI ISKANDAR. [Final Year Project]

MOHD NOOR, NOR SAFIRA ELAINA (2016) EEG-MEG DIPOLE SOURCE LOCALIZATION OF N20 SOMATOSENSORY COMPONENT IN FRONTO-PARIETAL BRAIN TUMOR PATIENTS. Masters thesis, Universiti Teknologi PETRONAS.

MOHD PAUZI, AIDA KHALEEDA (2016) Rotor Dynamic Analysis of Centrifugal Compressor due to Liquid Carry Over. [Final Year Project] (Submitted)

MOHD SAAD, NOR HASWANI (2016) PREDICTION OF PORE WATER-PRESSURE USING GENERALIZED REGRESSION NEURAL NETWORK. [Final Year Project]

MOHD ZAID, HAYYIRATUL FATIMAH (2016) PHOTOOXIDA TIVE-EXTRACTIVE DEEP DESULFURTZA TION OF DIESEL FUEL USING Cu-Fe/Ti02 AND EUTECTIC-BASED TONIC LIQUIDS. PhD. thesis, Universiti Teknologi PETRONAS.

MOHD ZAID, HAYYIRATUL FATIMAH (2016) PHOTOOXIDATIVE-EXTRACTIVE DEEP DESULFURIZATION OF DIESEL FUEL USING Cu-Fe/Ti02 AND EUTECTIC-BASED IONIC LIQUIDS. PhD. thesis, Universiti Teknologi PETRONAS.

MOHD ZULFAKHAR, ANIS INSYIRAH (2016) THE EFFECT OF MILD EXERCISE ON ATTENTION PERFORMANCE AND STRESS LEVEL. [Final Year Project] (Submitted)

MOHMAD @ FIKRI, FAEZ (2016) INVESTIGATION OF TITANIUM ADDITION ON PHYSICAL AND MECHANICAL PROPERTIES OF POWDER INJECTION MOLDED 316L STAINLESS STEEL PARTS. [Final Year Project] (Submitted)

MUHAMAD BARZANI, FADHIL (2016) UNMANNED AERIAL VEHICLE (UAV)-DRONE UNDER ROBOT OPERATING SYSTEM (ROS) FOR OBSTACLE AVOIDANCE via TAG RECOGNITION. [Final Year Project]

MUHAMAD NAZRI, NUR INTAN ADHANI (2016) A MULTIMODAL INTERACTION AND INFORMATION PRESENTATION DESIGN MODEL FOR MOBILE AUGMENTED REALITY APPLICATION. Masters thesis, Universiti Teknologi PETRONAS.

MUHAMMAD LAGHARI, SHUAIB (2016) COMPARATIVE STUDY OF AGRICULTURAL LIGNOCELLULOSIC BIOMASS DELIGNIFICATION BY MICROWAVE ASSISTED CHEMICAL PRETREATMENT. Masters thesis, Universiti Teknologi PETRONAS.

MUMTAZ, WAJID (2016) FEATURE SELECTION OF ELECTROENCEPHALOGRAPHY (EEG) BIOMARKERS FOR UNIPOLAR MAJOR DEPRESSIVE DISORDER (MDD). PhD. thesis, Universiti Teknologi PETRONAS.

MUSA, NUR NASHA (2016) POST FLOOD ASSESSMENT IN PERAK TENGAH. [Final Year Project]

MUSHTAQ, SHAHRYAR (2016) FEASIBILITY STUDIES OF CONVERTING A MECHANISM INTO A DUALOUTPUT PULSATING STATOR-LESS MOTOR. Masters thesis, Universiti Teknologi PETRONAS.

Madzir, Mohammad Naaim (2016) Self-powered kit for lighting system. [Final Year Project] (Submitted)

Mahmoud, Ali Moghavvemi (2016) Investigation on the Phalange Contact Force for a 2 finger Pulley-Tendon Driven Robotic Hand. [Final Year Project] (Submitted)

Mahmoud Mogalid, Sabir Salah (2016) Energy Monitoring of Energy Harvesting Wireless Sensor Networks. [Final Year Project] (Submitted)

Mahmud, Nur Shafiqa Aquilah (2016) Water Quality Assessment of Downstream Penang River and Heavy Metals Accumulation in Seagrass. [Final Year Project]

Mahmud, Ilya Amanina (2016) Inherent Safety Level Assessment of Process Stream Index (PSI): A Case Study of Bio-Refinery Plant. [Final Year Project] (Submitted)

Majeed, Zahid (2016) Biodegradibility of Lignin Reinforced Urea-Crosslinked Starch Composite Films as Slow Release Fertilizer in Soil. Doctoral thesis, Universiti Teknologi PETRONAS.

Makhtar, Muhammad Makram (2016) Inter-Robot Data Exchanged for Locomotion and Localisation. [Final Year Project] (Submitted)

Manoharan, Avinash Kumar (2016) Feasibility of Using Ionic Liquids as an Environment Friendly Corrosion Inhibitor of Carbon Steel in the Saline Solution. [Final Year Project]

Mansor, Md Yazid (2016) Tectono-stratigraphic Development of The Intracratonic Malay Basin: Correlation of Deformation Scale and Hydrocarbon Distribution. Masters thesis, Universiti Teknologi PETRONAS.

Maqsood, Khuram (2016) Development and Optimization of Hybrid Cryogenic Distillation Network for CO2 Removal. Doctoral thesis, Universiti Teknologi PETRONAS.

Marial Amom, James Matungbor (2016) Application of Acoustic Impedance Inversion to Evaluate the Pay Zone Distribution in Sepat Field, Malay Basin. [Final Year Project] (Submitted)

Mat Salleh, Nur Syuhaidah (2016) SCALING RATIO EFFECTS ON THE PREDICTION OF THE DYNAMIC MOTIONS OF SEMI-SUBMERSIBLE PLATFORMS PROTOTYPE IN THE VIEW OF TESTING FACILITIES LIMITATIONS. [Final Year Project] (Submitted)

Mat Tasir, Muhammad Hakim (2016) OPTIMAL DESIGN OF HELICAL COMPRESSION SPRINGS. [Final Year Project] (Submitted)

Mat Yaacob, Muhd Azmi (2016) Framework for Effective Safety Management in Construction Projects. [Final Year Project]

Mazlan, Mohamad Mizal Saiful Anuar (2016) Process Parameters Optimization of High Density Polyethylene (HDPE) Friction Stir Welded Plates. [Final Year Project]

Mazlan, Suraya Fateha (2016) Development of a Powered Exoskeleton for Lower Extremities. [Final Year Project] (Submitted)

Mba Obama, Mari Paz Eyang (2016) Flexible Transparent Conductor Film using Graphene-Carbon Nanotubes on PDMS. [Final Year Project] (Submitted)

Md Arif, Muhammad Nafiz Izzat (2016) Investigation Of The Critical Features Affecting The Condition Of Oil And Gas Pipeline. [Final Year Project] (Submitted)

Md Fuad, Muhammad Aiman (2016) Investigation On The Current Amplification For Multiple Input RF Energy Harvester Circuit. [Final Year Project] (Submitted)

Md Saad, Luqman (2016) Prediction Model for the Toxicity of pyridinium Based Ionic Liquids Towards vibrio fischeri Bacteria Using QSAR Models. [Final Year Project]

Md Said, Mohd Shahruddin (2016) Dynamic Stability of Aerostat-Drone. [Final Year Project] (Submitted)

Md. Ibrahim, Nor Nurulhuda (2016) Diffusion Bonding and Post-Bond Heat Treatment of Sialon-Nitrided AISI 420 Stainless Steel. Doctoral thesis, Universiti Teknologi PETRONAS.

Medhi, Muhammad Fakhrul (2016) Hyperbilirubinemia Treatment Device. [Final Year Project] (Submitted)

Mengal, Ali Nawaz (2016) Mechanical Properties of Basalt-Carbon/Epoxy Hybrid Laminated Composite for Wind Turbine Rotor Blades. Doctoral thesis, Universiti Teknologi PETRONAS.

Mergany, Mohamed Ibrahim Mahgoub (2016) Integrated Reservoir Characterization and 3D Property Modeling of the Paleocene Yabus Sandstone, Melut Rift Basin, Sudan. Doctoral thesis, Universiti Teknologi PETRONAS.

Mhd Nasser, Asma‘ Khairunnisa‘ (2016) Development of Excel-Based Piping Vibration Assessment Model. [Final Year Project] (Submitted)

Midir, Victor (2016) Study on corrosion of offshore jacket platform. [Final Year Project] (Submitted)

Mifumu, Juan Esono (2016) Deep Learning In Retinal Vessel Extraction. [Final Year Project] (Submitted)

Min Chai, Sheng Le (2016) Design & Development of 3 Degree of Freedom Robot Controller. [Final Year Project] (Submitted)

Min Yang, Nicky Tay (2016) Experimental Study on Shear Interaction of Carbon Fibre Reinforced Polymer (CFRP) and Transverse Steel Stirrups on Shear Strengthened RC Beams. [Final Year Project] (Submitted)

Mohamad @ Rusdi, Muhammad Faez Ezanee (2016) Simulation and Modelling of a Gas Separation System. [Final Year Project] (Submitted)

Mohamad Amir, Muhamad Amirul Luttfi (2016) An Investigation on Fibre Loading and Dimension towards Moisture Absorption in Biocomposites. [Final Year Project]

Mohamad Arba’i, Nurul Afiqah (2016) Radial Interaction for Corrosion Defects in Offshore Pipeline. [Final Year Project]

Mohamad Idris, Irham Hameeda (2016) Development of Low Thermal Mass Cement Block Using Peat Soil and Effective Microorganism. [Final Year Project]

Mohamad Kassim, Azmiera (2016) Effect of Sacrificial Anodes on the Wave Forces on Jacket Members. [Final Year Project]

Mohamad Lutfi, Mohamad Ashraf (2016) Effects of Ball Milling Time on the Fire Performance Red Mud Intumescent Coating. [Final Year Project] (Submitted)

Mohamad Nizu, Nurul Ain (2016) General Geology and Engineering Geology from KM61 to KM50 Jalan Lojing – Gua Musang, Kelantan. [Final Year Project]

Mohamad Yusoff, Syaza Yasmin (2016) CFD Modeling of Thermoelectric Air Duct System for Cooling of Building Envelope. [Final Year Project] (Submitted)

Mohamed, Azza Hashim (2016) Keyboard-less System Using EEG Signals. [Final Year Project]

Mohamed Raffek, Mohamed Ashnor (2016) Predicting Standard Penetration Test (SPT-N) Value from Electrical Resistivity Result. [Final Year Project]

Mohamed Salleh, Putra Ahmad Khalifa (2016) PORTABLE STABILIZER FOR PICO-SCALE BUOY GENERATOR. [Final Year Project]

Mohamed Termizi, Noor Aniza (2016) Thermogravimetric Kinetic Analysis and Characterization of Poultry Processing Dewatered Sludge. Masters thesis, Universiti Teknologi PETRONAS.

Mohamed Yunus, Mohmed Azman (2016) Simulation of Parabolic Trough Collector (PTC) for Direct Steam Generation (DSG) under Malaysia Weather. [Final Year Project] (Submitted)

Mohamed@Mohamad, Nurul’ Ain (2016) Total Sites Analysis (TSA) Implementation in Sahabat Oil Products, Lahad Datu, Sabah, Malaysia. [Final Year Project]

Mohammad, Mohamad Asyraf (2016) Stratigraphy and Depositional Model of the Chert Member of the Semanggol Formation, Kebun 500, Pokok Sena, Kedah. [Final Year Project]

Mohammad Azam, Siti Fatimah (2016) Remote Temperature Sensing in Campus: An Internet of Things Environmental Monitoring Application. [Final Year Project] (Submitted)

Mohammad Izani, Nik Mohd Hakim (2016) Analysis and Simulation of PDC Drill Bit Design In Mitigating Stick and Slip. [Final Year Project] (Submitted)

Mohammad Rabeek, Mohamed Tawfeek (2016) Development of a Model to Predict the Global Solar Radiation Using Statistical Techniques. [Final Year Project] (Submitted)

Mohammad Rafi, Mohammad Syafiq (2016) Aerodynamic Analysis on Small Race Car Body by using CFD Simulation. [Final Year Project] (Submitted)

Mohammad Yatim, Amirah Izzati (2016) Mobile Robot with Navigation Control and Communication. [Final Year Project] (Submitted)

Mohammed Al-Hashimy, Zahid Ibrahim (2016) Experimental and Numerical Investigation on the Vibrations Induced by Slug Flow Interaction with Horizontal Pipe Structure. Doctoral thesis, Universiti Teknologi PETRONAS.

Mohammed Saeed Dahi, Saleh (2016) Analytical Investigation of Precast Post-Tensioned Column of Ultra-High Performance Concrete (UHPC). [Final Year Project]

Mohammed Salem Alqoushah, Sulaiman (2016) Experimental Study on the Effects of Various Scale Ratios of Physical Models on the Prediction of the Semi-Submersible Platform Dynamic Motions. [Final Year Project]

Mohd Ali, Syazwani (2016) Studying the Parameters Which Affect Sprinkler Fire Protection System Performance in Buildings. [Final Year Project] (Submitted)

Mohd Anuar, Nurulain Husna (2016) PREDICTION OF SOIL PORE WATER PRESSURE RESPONSES TO RAINFALL USING RADIAL BASIS KERNEL FUNCTION. [Final Year Project] (Submitted)

Mohd Ariffin, Mazeyanti (2016) Serious Game-Design Model for Malaysia Culture. Doctoral thesis, Universiti Teknologi PETRONAS.

Mohd Arshad, Mohamad Hazrul Azli (2016) The Study of the Effects of Drilled Hole on Tensile Strength of Hybrid Fiber Reinforced Epoxy (HFRE) Composite. [Final Year Project] (Submitted)

Mohd Aziz, Wan Shahira (2016) Harmonic Study on UTP New Building Network. [Final Year Project] (Submitted)

Mohd Azmi, Muhamad Aizat Syafiq (2016) NITRIDING OF 2205 DUPLEX STAINLESS STEELS TO ENHANCE CORROSION RESISTANCE. [Final Year Project] (Submitted)

Mohd Azmi, Muhammad Nazirul (2016) Indoor Lighting Coverage Simulator In A Process Plant. [Final Year Project] (Submitted)

Mohd Eilham, Mohamad Anis (2016) Study on Low Boost Pressure Effect of Electric Turbocharger on Engine Performance. [Final Year Project] (Submitted)

Mohd Hailami, Nur Nadhirah (2016) Sedimentology and Stratigraphy of Two Mesozoic Successions along the Jerantut-Maran Road, Pahang. [Final Year Project]

Mohd Isa, Mohd Fazlie (2016) Pattern Classification of Human Epithelial Images. [Final Year Project] (Submitted)

Mohd Kamarudin, Nur Eliza (2016) DEVELOPMENT OF IRIS RECOGNITION SYSTEM. [Final Year Project] (Submitted)

Mohd Kamel, Muhamad Aizuddin (2016) Study and Analysis of Material Characteristics for Capacitive Coupling Wireless Power Transfer System. [Final Year Project] (Submitted)

Mohd Karim, Ariff Hakimy (2016) Design Improvement of Existing Slip-on Sprocket. [Final Year Project] (Submitted)

Mohd Misri, Sarah (2016) Development of the Circuit to Detect Electric Currents in AC Motors for Wireless Monitoring. [Final Year Project] (Submitted)

Mohd Mokhtar, Munirah Radin (2016) Integrated Unmanned Aerial Vehicle and Close Range Photogrammetry for Remote Landslide Monitoring System. Doctoral thesis, Universiti Teknologi PETRONAS.

Mohd Nasir, Asyraf (2016) KIRCHHOFF PRE-STACK DEPTH MIGRATION ON COMPLEX STRUCTURES. [Final Year Project]

Mohd Nasir, Muhammad Ahnaf (2016) Investigating the Effects of Addition of Different Copper Amount in Fe-Cu-C by Powder Metallurgy. [Final Year Project] (Submitted)

Mohd Nazree, Muhammad Azlan Nasrin (2016) Reducing Re-Absorption Losses In Luminescent Solar Concentrators ( LSC’s) By Using Nanomaterials. [Final Year Project] (Submitted)

Mohd Nordin, Muhamad Nabil (2016) Parametric Study on Spectral Fatigue Analysis of Offshore Jacket Platform X with Software SESAM. [Final Year Project] (Submitted)

Mohd Nordzi, Nur Amirah (2016) Experimental Study on Inertia Coefficient of Fixed Vertical Cylinder Subjected to Short Crested Waves. [Final Year Project] (Submitted)

Mohd Rawi, Noor Aiman Zafira (2016) Camera Alignment System for Face Detection. [Final Year Project] (Submitted)

Mohd Rodzhan, Nur Syahirah (2016) Evaluation of Epoxy-Based Fire Retardant Basalt Fibre Reinforced Intumescent Coating with Aluminum Trihydrate (ATH) for Fire Retardancy Protection of Structural Steel. [Final Year Project]

Mohd Roslim, Mohd Iqbal (2016) Adsorption Mechanism of Chitosan/Polyvinyl Alcohol (PVA) Hydrogels in Wastewater Treatment. [Final Year Project]

Mohd Sahimy, Mohamad Razman (2016) Hydrodynamics and loadings of tsunami waves with different fluid characteristics: Newtonian & non-Newtonian. [Final Year Project]

Mohd Saiful Bahren, Mohd Danial (2016) Small Car Carbon Dioxide Emission Analysis Through Drive Cycle Patterns on Chassis Dynamometer. [Final Year Project]

Mohd Salleh, Muhammad Farid (2016) Performance of Geopolymer Concrete in Aggressive Environment. [Final Year Project]

Mohd Shaib, Siti Nur Fatihah (2016) Nonlinear and Linear System Identification Step Reflux Flow Rate for Distillation Column. [Final Year Project] (Submitted)

Mohd Shapri, Nurul Syahirah (2016) The Effectiveness of Orange Peel in Removing Nickel in Wastewater. [Final Year Project] (Submitted)

Mohd Sharif, Noor Shaerra Amiera (2016) Road Speed Profile at Accident Prone-Areas in Universiti Teknologi PETRONAS (UTP). [Final Year Project]

Mohd Shariff, Jakiah Shahira (2016) Nutrients Removal (Nitrogen) From the Wastewater in an Integrated Wastewater Treatment Reactor. [Final Year Project] (Submitted)

Mohd Sharil, Muhammad Shameer (2016) Solar Roof Distilling Tiles. [Final Year Project]

Mohd Subri, Mohd Syauqi (2016) Development of Incident Investigation Model for Process Safety Management Compliance. [Final Year Project] (Submitted)

Mohd Suhaimi, Nor Atiqah b (2016) Prediction of Peak Junction Temperature of Semiconductor Devices: A Simulation Study. [Final Year Project] (Submitted)

Mohd Tarik, Mohammad Haizad (2016) Design and development of fuzzy logic controller for cascade control application. [Final Year Project] (Submitted)

Mohd Thulus, Shahmirul Azri (2016) Green Fuel: Improvement of Engine Performance using Water-in-Diesel Emulsion (WiDE) with a Small Percentage of Hydrogen. [Final Year Project] (Submitted)

Mohd Yusoff, Muhamad Syazwan (2016) Propensity of Commercial Automotive Fuel for Boilover. [Final Year Project]

Mohd Yusuf, Muhammad Firdaus (2016) CHARACTERIZING SURFACE GROUND SETTLEMENT INDUCED BY UNDERGROUND TUNNEL EXCAVATION. [Final Year Project]

Mohd Zahid, Puteri Nor Atikhah Fadhilah (2016) Enhancing Productivity of Passive Solar Still Using Black Cylindrical Fins. [Final Year Project]

Mohd Zaid, Hayyiratul Fatimah (2016) Photooxidative-Extractive Deep Desulfurization of Diesel Fuel Using Cu-Fe/TIO2 and Eutectic Based Ionic Liquids. Doctoral thesis, Universiti Teknologi PETRONAS.

Mohd Zaihan, Muhammad Zarief Fittry (2016) Detection of Potential Shallow Hazards through Shallow Subsurface Mapping at Bujang Field: Malay Basin. [Final Year Project]

Mohd Zaini, Fatin Norlyana (2016) THE STUDY OF THE EFFECTIVENESS OF SAFETY PRECAUTIONS IN CONSTRUCTION PROJECT. [Final Year Project] (Submitted)

Mohd Zaini, Mohammad Haniff (2016) Consequence Study of CO2 Droplet Leakage in Seawater using Computational Fluid Dynamic (CFD) Approach. [Final Year Project]

Mohd Zamri, Ahmad Aiman Afif (2016) Mechanical Properties of Palas Fiber Reinforced Composite. [Final Year Project] (Submitted)

Mohd Zian, Muhammad Danial (2016) A Study of Acoustic Properties of Coconut Coir and Vermiculite Composite as Noise Insulation in Vehicles. [Final Year Project] (Submitted)

Mohideen Batcha, Mohd Faizal (2016) Aerodynamics and Hydrodynamics Study of a Swirling Fluidized Bed with Inward Sloped Distributor. Doctoral thesis, Universiti Teknologi PETRONAS.

Mohshim, Dzeti Farhah (2016) Synthesis of Enhanced Ionic Liquid Mixed Matrix Membranes for Carbon Dioxide Separation from Methane. Doctoral thesis, Universiti Teknologi PETRONAS.

Mubin, Mukhriz (2016) STUDY OF DISSOLUTION FEATURES IN CARBONATE RESERVOIR IN CENTRAL LUCONIA PROVINCE, SARAWAK. [Final Year Project]

Muhamad, Muhamad Fikri (2016) EFFECTS OF DRILLING GENERATED HEAT ON DELAMINATION IN GLASS FIBER REINFORCED EPOXY (GFRE) COMPOSITES. [Final Year Project]

Muhammad, Muhammad Faiz (2016) Development of A Wireless Sensor Network For Flood Monitoring. [Final Year Project] (Submitted)

Muhammad Fauzi, Fateh Hakeem (2016) The Production of 1, 3-Propanediol by Aqueous Phase Reforming of Glycerol over Nickel Based Catalyst. [Final Year Project] (Submitted)

Muhammad Hasni, Danial Ilman (2016) Terrain Characterizations and Classifications of Semanggol Formation and Its Adjacent Areas by Using Remote Sensing and GIS Techniques. [Final Year Project]

Muhammad Nizam, Hariz Asnawi (2016) General Geology and Petrophysical Properties of Interval III (300 M to 400 M) in Well CTW01 : Input for the Geologic Model of Seri Iskandar. [Final Year Project]

Muhammed Khan, Abid (2016) Pilot based Time OFDM Channel Estimation for DVB Applications. Doctoral thesis, Universiti Teknologi PETRONAS.

Muhd Nor, Nik Nur Izzatul Ikmal (2016) Metalloporphyrin Encapsulated Zeolite Y for Efficient Photocatalysis. [Final Year Project] (Submitted)

Muosteut, Muosteufa (2016) Life Cycle Cost Comparison of Heat Recovery Steam Generator and Auxiliary Boiler. [Final Year Project] (Submitted)

Murugiah, Pannir Selvam (2016) Development of PSF/APTES-nano-MCM-48 Mixed Matrix Membrane for CO2/CH4 Separation. [Final Year Project] (Submitted)

Mustafa, Ayad Tareq (2016) Performance Evaluation of A Developed Solar Vortex Engine. Doctoral thesis, Universiti Teknologi PETRONAS.

Mustaffa, Muhammad Dinie Akmal (2016) Analysis of Epileptic Seizure Using Wavelet Transform. [Final Year Project] (Submitted)

Mustaffa Kamal Basha, Abdul Aziz (2016) Development of LabVIEW FPGA program for Energy Management System (EMS) Controller for Hybrid Electric Vehicle (HEV). [Final Year Project] (Submitted)

Mustapha, Muhamad Nizam (2016) Fast Train Track Quality Measurement Using Gyro Sensors. [Final Year Project] (Submitted)

Mustapha, Nur Nadiah (2016) Substitution Study for Cost Effective Hybrid Power System using Power Pinch Analysis. [Final Year Project] (Submitted)

N SETHAMBARAM, CARTHIKRAJA N SETHAMBARAM (2016) Numerical Simulation of Rock-Cutter Interaction in Drilling Operation Using ANSYS AUTODYN 3D. [Final Year Project] (Submitted)

N. Narayanasamy, Anand (2016) Diagnosis of Poor Control Loop Performance: Development of a Model Based Compensation Algorithm for Control Valve Stiction Nonlinearity. [Final Year Project]

NELSON , YANG SOON KIT (2016) EVALUATION OF MODIFIED KENT-EISENBERG MODEL TO PREDICT HYDROGEN SULPHIDE SOLUBILITY IN METHYLDIETHANOLAMINE. [Final Year Project]

NGO , THI PHUONG THUY (2016) HEAT EXCHANGER NETWORK SYNTHESIS AND OPTIMIZATION BY PINCH ANALYSIS AND DIFFERENTIAL EVOLUTION METHOD. Masters thesis, Universiti Teknologi PETRONAS.

NGUYEN , TIEN THANH (2016) THE GROWTH AND CHEMICAL COMPOSITION OF FRESHWATER MICROALGAE SCENEDESMUS QUADJUCAUDA UNDER VARIOUS CULTIVATION CONDITIONS. Masters thesis, Universiti Teknologi PETRONAS.

NIK MAHAMED, NIK SAHIRA NAJIHA (2016) Development of Solid Fuel Briquette from Coal Waste. [Final Year Project] (Submitted)

NORDIN, AFIF AIMAN (2016) Comparative Study on Red Mud Modified Intumescent Coating. [Final Year Project] (Submitted)

NORDIN, AZMI HADZALIE (2016) ESTIMATES OF WAVE ENERGY SPECTRA IN MALAYSIAN WATERS. Masters thesis, Universiti Teknologi PETRONAS.

Na, Kai Lun (2016) Novel Decommissioning Selection Toolkit for Fixed Offshore Platforms in Malaysia. Masters thesis, Universiti Teknologi PETRONAS.

Nagasparan, Sivaneswaran (2016) Synthesis and Characterization of Metakaolin Acid-Based Geopolymer for Hydrogen Adsorption Study Using Fixed Bed Reactor. [Final Year Project]

Nair Suthesan, Tharaniya S (2016) Photocatalytic Degradation of Diisopropanolamine (DIPA) in Wastewater Under Visible Light. [Final Year Project] (Submitted)

Najmudin, Nor Syahirah (2016) Comparative analysis of lateral earth pressure acting on braced excavation wall. [Final Year Project]

Nanimina, Alexis Mouangue (2016) Powder Mixed Electrical Discharge Machining on Titanium Alloy and Molybdnenum High Speed Steel. Doctoral thesis, Universiti Teknologi PETRONAS.

Narin, Sovann (2016) Enhancement of Short-term Load Forecasting Based on Parallel Hybrid Wavelet Neural Network. Masters thesis, Universiti Teknologi PETRONAS.

Nasir, Rizwan (2016) Synthesis, Characterization and Performance Evaluation of Amine Mixed Matrix Membranes for CO2/CH4 Separation. Doctoral thesis, Universiti Teknologi PETRONAS.

Nawawi, Mohammad Aidil (2016) APPLICATION OF SEISMIC INVERSIONS AND SPECTRAL DECOMPOSITION OF KTN FIELD, TAIWAN. [Final Year Project]

Nawaz, Faiza (2016) Efficient Data Delivery in Dense Reader Environment of Passive Sensor Network. Doctoral thesis, Universiti Teknologi PETRONAS.

Nazily, Siti Ameera Nadya (2016) Immobilization of Chlorella vulgaris for Palm Oil Mill Effluent(POME) Treatment and Heavy Metals Removal. [Final Year Project]

Ng, Jia Ping (2016) Synthesis and Characterization of Bed Adsorbent from Coconut Shell for Separation of CO2 from Natural Gas. [Final Year Project] (Submitted)

Ngaing , Ing Kai (2016) Experimental Investigation of Engine Performance and Exhaust Emissions of DI Diesel Engine using various Water in Diesel Emulsion. [Final Year Project] (Submitted)

Ngui, Jia Qi (2016) Sedimentology and Stratigraphy of the Early Neogene Sarawak Basin (Tatau-Bintulu Road), Sarawak, Malaysia. [Final Year Project] (Submitted)

Nik Ab Rashid, Nik Nur Nailini (2016) Thermal Analysis of VLSI System: A Simulation Study. [Final Year Project] (Submitted)

Nik Ahmad Ridzlan, Nik Aiemen Razieq (2016) Pipeline modelling for leak detection using pressure gradient method. [Final Year Project] (Submitted)

Nizam Shah, Muhammad A’izuddin (2016) Investigation on Grain Size Changes in Gamma Prime Precipitate on Varying Surface Location of IN738 Engine Turbine Blade. [Final Year Project] (Submitted)

Nizamuddin, Mohamed Fazlan (2016) Subsea Pipelines Health Prognostics Using Rate of Crack Propagation and Marco-Starkey, Cumulative Damage Theory. [Final Year Project] (Submitted)

Nmdjandod , Patrick Beriman (2016) Presenter Tracking for Video Recording on Intel Galileo Board. [Final Year Project] (Submitted)

Noor Azman, Nur Allia Ellysa (2016) Patterning Monolayer Graphene Using Plasma Etcher For Transparent Conducting Electrode Applications. [Final Year Project] (Submitted)

Noor Zulkifli, Nur Amalina (2016) Estimation of Composition for Depropanizer Column Using Neural Network. [Final Year Project] (Submitted)

Nor Azlan, Adam (2016) Failure Analysis of Broken Pump Shaft. [Final Year Project] (Submitted)

Nordin, Azmi Hadzalie (2016) Formulation of wave Energy Spectra in Malaysian Waters. Masters thesis, Universiti Teknologi PETRONAS.

Nordin, Normayati (2016) Performance Investigation of Turning Diffusers at Various Geometrical and Operating Parameters. Doctoral thesis, Universiti Teknologi PETRONAS.

Nordin, Amzani Nazmi (2016) Performance Monitoring Analysis of Centrifugal Compressor Using Statistical Process Control. [Final Year Project]

Nordin, Idayu (2016) The Use Of Algae Wastes As Bio Adsorbent For Heavy Metals Removal. [Final Year Project] (Submitted)

Norman, Nazrul Iqhwan (2016) Embedded System for Train Track Quality Assessment. [Final Year Project] (Submitted)

Noslan, Muhammad Zulhilmi (2016) Wearable sensors for personalized health. [Final Year Project] (Submitted)

Ntutumu Nsang, Dionisio Miguel (2016) Study on Reduction of Cooling Energy for Air Conditioning by Flexible Space Compartmentalization in Residential Houses. [Final Year Project] (Submitted)

Nugraheni, Rosmalia Dita (2016) Deposition Architecture and Diagenesis of the Clastic Sedimentary Systems of the Belaga Balingian and Begrih Formations. Doctoral thesis, Universiti Teknologi PETRONAS.

OBAID BA TIS, MANSOOR ABDULLAH (2016) Adsorption Characteristics of Benzene in Surface Modified Montmorillonite. [Final Year Project]

Omar, Mohammad Ali Syafiq (2016) Prospect Mapping Of Reservoir Z, Maari-Manaia Field, Taranaki Basin, New Zealand. [Final Year Project]

Omar, Nurul Syuhada (2016) Rapid Data Exchange Using RFID for Examination Result Process. [Final Year Project] (Submitted)

Omar Al-Shaeer, Osamah Hasan (2016) Design and Development of Pipeline Inspection Vehicle (PIG). [Final Year Project] (Submitted)

Omar Baslasl, Maher Saleh (2016) Methanol Production via CO2 Hydrogenation on Promoted Cu-based Catalyst. [Final Year Project] (Submitted)

Ong, Ching Yee (2016) Geology of Batu Gajah with Emphasis on the Characteristics of Carbonaceous Schist for Hydrocarbon Prediction. [Final Year Project]

Ong , See Ching (2016) An Integrated Static Reservoir Modelling of Yan Chang formation, Ordos Basin, China. [Final Year Project] (Submitted)

Ooi, Wei Chian (2016) Geology & Geomechanics of Rhyolite, Lanchang, Pahang. [Final Year Project] (Submitted)

Ooi , Yong Seng (2016) Developing A Single Phase Energy Monitoring System. [Final Year Project] (Submitted)

Osman, Hala Hatim (2016) ARTERIAL PULSE WAVEFORM AND ESTIMATION OF BLOOD PRESSURE. [Final Year Project]

Osman Mohamed, Ola Yahia (2016) Dynamic Light Scattering and UV-Vis Spectrophotometric Assessment of Stability of Metal Nanoparticles in Aqueous Medium. [Final Year Project] (Submitted)

Osmira, Nur Husna Anira (2016) Development of Markov Model for Piping System Reliability Analysis Subjected to Corrosion Under Insulation. [Final Year Project]

Othman, Ir Idris (2016) Risk Framework for Successful Completion of Sustainable Construction Projects. Doctoral thesis, Universiti Teknologi PETRONAS.

Othman, Shuhadah (2016) Multi-Creteria Decision Making Model in Stock Trading Malaysia Using Fuzzy Analytical Herarchy process. Masters thesis, Universiti Teknologi PETRONAS.

Othman, Mohamed Azeem (2016) Studies of structural properties of char from intumescent coating. [Final Year Project] (Submitted)

Owolabi, Afolabi Lukmon (2016) Performance Enhancement of Nano-additives in a Flat-plate Solar Collector Integrated with Thermal Energy Storage Systems. Doctoral thesis, Universiti Teknologi PETRONAS.

PASHA, MOHSIN (2016) INHERENTLY SAFER DESIGN FRAMEWORK FOR THE HEAT EXCHANGER NETWORK AT PRELIMINARY DESIGN STAGE. Masters thesis, Universiti Teknologi PETRONAS.

PHAM , LAM VUONG (2016) DEVELOPMENT OF SCREENING METHOD FOR ALCOHOL USE DISORDER BASED ON ELECTROENCEPHALOGRAM ANALYSIS. Masters thesis, Universiti Teknologi PETRONAS.

PING, KAM CHONG (2016) EXPERIMENTAL AND NUMERICAL INVESTIGATION ON THE ENHANCEMENT OF NATURAL UP DRAFTING IN A CHIMNEY. [Final Year Project] (Submitted)

POULINO, MBIKOYESU MOSES (2016) Corrosion modeling for condition assessment of offshore jacket Leg for life extension. [Final Year Project]

PURNOMO, EKO WIDI (2016) ENERGY CONSTRAINED STOCHASTIC SEISMIC INVERSION FOR THIN BED. PhD. thesis, Universiti Teknologi PETRONAS.

PUSPALINGAM, TARVINTHRANATH (2016) SEMI-CONTINUOUS CULTIVATION OF MICROALGAE USING COMPOST AS NUTRIENTS SOURCE FOR BIOMASS AND LIPID PRODUCTION. [Final Year Project] (Submitted)

Palaniappan, Thenappan (2016) Synthesis and Characterisation of Sulphur-Functionalised Silica Nanocapsules for Mercury Removal Process. [Final Year Project] (Submitted)

Pang, Zhen Hong (2016) Polymer Ionic Liquid Electrolyte for Dye-sensitized Solar Cell. [Final Year Project] (Submitted)

Pang , Chang-Tze (2016) Investigation of Factors Affecting Performance of Solar Still. [Final Year Project] (Submitted)

Pangestu, Ligar Anggara (2016) EXPERIMENTAL INVESTIGATION OF HYDRODYNAMIC COEFFICIENTS ON VERTICAL CYLINDER SUBJECTED TO SHORT-CRESTED WAVES. [Final Year Project] (Submitted)

Panneerchelvam, Hemala (2016) Study on the Flow Dynamics of Nitrogen and Hydrogen Gases in a Monolithic Microchannel. [Final Year Project]

Param Kumar, Vanisha Kumar (2016) Thermodynamic Effect Of Tetra-N-Butylammonium Hydroxide On CO2 Hydrate Promotion. [Final Year Project] (Submitted)

Paramaguru, Dhanis (2016) CFD Simulation of Temperature and Humidity Distribution over Large Manufacturing Facilities. [Final Year Project] (Submitted)

Parameswaran, Shaavesh Kumaran (2016) Carbon Dioxide Solubility Study of Piperazine Added Solvent. [Final Year Project] (Submitted)

Pardiansyah, Indratno (2016) A Combined Histogram of Orinted Gradients and Completed Local Binary Pattern Method for People Counting in a Dense Crowd Scenario. Masters thesis, Universiti Teknologi PETRONAS.

Pasha, Mohsin (2016) Inherently Safer Design Framework for the Heat Exchanger Network at Preliminary Design Stage. Masters thesis, Universiti Teknologi PETRONAS.

Past Year Exam Question (2016) 11 VDB1033 GEOLOGY FOR ENGINEERS. [Past Year Examination Question]

Past Year Exam Question (2016) 23 QAB4083 SEISMIC DATA PROCESSING(ME). [Past Year Examination Question]

Past Year Exam Question (2016) CCB1033 CDB1033 CHEMICAL ENGINEERING FLUID MECHANICS. [Past Year Examination Question]

Past Year Exam Question (2016) CCB2033 / CDB2023 HEAT TRANSFER DESIGN / PROCESS HEAT TRANSFER. [Past Year Examination Question]

Past Year Exam Question (2016) CCB2044 CHEMICAL ENGINEERING THERMODYNAMICS. [Past Year Examination Question]

Past Year Exam Question (2016) CCB2053 / CDB2013 MASS TRANSFER DESIGN / SEPERATION PROCESS I. [Past Year Examination Question]

Past Year Exam Question (2016) CCB2073 CDB3093 ANALYTICAL CHEMISTRY. [Past Year Examination Question]

Past Year Exam Question (2016) CCB3013 /CDB3013. [Past Year Examination Question]

Past Year Exam Question (2016) CCB3033 / CDB3033 ADVANCED TRANSPORT PROCESSES / TRANSPORT PHENOMENA. [Past Year Examination Question]

Past Year Exam Question (2016) CCB3043 CDB2043 REACTION ENGINEERING. [Past Year Examination Question]

Past Year Exam Question (2016) CCB3053 PROCESS SAFETY & LOSS PREVENTION. [Past Year Examination Question]

Past Year Exam Question (2016) CCB4213 AIR POLLUTION ENGINEERING. [Past Year Examination Question]

Past Year Exam Question (2016) CCB4233 INDUSTRIAL EFFLUENT ENGINEERING. [Past Year Examination Question]

Past Year Exam Question (2016) CCB4333 PROCESS OPTIMIZATION. [Past Year Examination Question]

Past Year Exam Question (2016) CCB4413 GAS PROCESS ENGINEERING. [Past Year Examination Question]

Past Year Exam Question (2016) CCB4423 POLYMER PROCESS ENGINEERING. [Past Year Examination Question]

Past Year Exam Question (2016) CCB4523 MULTIVARIABLE PROCESS CONTROL. [Past Year Examination Question]

Past Year Exam Question (2016) CCB4613 HUMAN FACTORS FOR PROCESS SAFETY. [Past Year Examination Question]

Past Year Exam Question (2016) CCB4633 TECHNICAL MANAGEMENT FOR PROCESS SAFETY. [Past Year Examination Question]

Past Year Exam Question (2016) CDB1013 CCB1013 ORGANIC CHEMISTRY. [Past Year Examination Question]

Past Year Exam Question (2016) CDB1013 ORGANIC CHEMISTRY. [Past Year Examination Question]

Past Year Exam Question (2016) CDB1023 CCB1023 PHYSICAL CHEMISTRY. [Past Year Examination Question]

Past Year Exam Question (2016) CDB1023 PHYSICAL CHEMISTRY. [Past Year Examination Question]

Past Year Exam Question (2016) CDB1042 INTRODUCTION TO MATERIAL SCIENCE & ENGINEERING. [Past Year Examination Question]

Past Year Exam Question (2016) CDB1053 INTRODUCTION TO ENGINEERING THERMODYNAMICS. [Past Year Examination Question]

Past Year Exam Question (2016) CDB1064 PRINCIPLES OF CHEMICAL ENGINEERING. [Past Year Examination Question]

Past Year Exam Question (2016) CDB2033 CHEMICAL ENGINEERING THERMODYNAMICS. [Past Year Examination Question]

Past Year Exam Question (2016) CDB3022 ENVIRONMENTAL CHEMICAL ENGINEERING. [Past Year Examination Question]

Past Year Exam Question (2016) CDB3044 / CCB3024 PROCESS PLANT DESIGN. [Past Year Examination Question]

Past Year Exam Question (2016) CDB3072 PROCESS SAFETY & LOSS PREVENTION. [Past Year Examination Question]

Past Year Exam Question (2016) DB2093 BUSINESS VENTURES. [Past Year Examination Question]

Past Year Exam Question (2016) EBB4023 ECB4023 EDB3023 DATA AND COMPUTER NETWORK. [Past Year Examination Question]

Past Year Exam Question (2016) ECB1014 / EDB1013 CIRCUIT THEORY. [Past Year Examination Question]

Past Year Exam Question (2016) ECB1033 EDB1053 MICROELECTRONICS PHYSICS AND DEVICES. [Past Year Examination Question]

Past Year Exam Question (2016) ECB1053 DIGITAL ELECTRONICS. [Past Year Examination Question]

Past Year Exam Question (2016) ECB1053 EDB1034 DIGITAL ELECTRONICS. [Past Year Examination Question]

Past Year Exam Question (2016) ECB2123 EDB2023 SIGNALS AND SYSTEMS. [Past Year Examination Question]

Past Year Exam Question (2016) ECB2133 DIGITAL ELECTRONICS II. [Past Year Examination Question]

Past Year Exam Question (2016) ECB2143 EDB2063 MICROPROCESSOR. [Past Year Examination Question]

Past Year Exam Question (2016) ECB2163 EDB2043 COMMUNICATION SYSTEMS. [Past Year Examination Question]

Past Year Exam Question (2016) ECB2173 EDB2013 ELECTROMAGNETIC THEORY. [Past Year Examination Question]

Past Year Exam Question (2016) ECB3113 EDB2073 DIGITAL SIGNAL PROCESSING. [Past Year Examination Question]

Past Year Exam Question (2016) ECB3123 EDB3083 CONTROL SYSTEMS. [Past Year Examination Question]

Past Year Exam Question (2016) ECB3133 EDB2053 PROBABILITY AND RANDOM PROCESS. [Past Year Examination Question]

Past Year Exam Question (2016) ECB3153 EDB3063 POWER SYSTEMS. [Past Year Examination Question]

Past Year Exam Question (2016) ECB3153 POWER SYSTEMS. [Past Year Examination Question]

Past Year Exam Question (2016) ECB3163 EDB3073 POWER ELECTRONICS. [Past Year Examination Question]

Past Year Exam Question (2016) ECB3173 / EDB3053 ELECTRICAL MACHINES. [Past Year Examination Question]

Past Year Exam Question (2016) ECB4023 DATA AND COMPUTER NETWORK. [Past Year Examination Question]

Past Year Exam Question (2016) ECB4223 INDUSTRIAL AUTOMATION AND CONTROL SYSTEMS. [Past Year Examination Question]

Past Year Exam Question (2016) ECB4233 PLANT PROCESS CONTROL SYSTEMS. [Past Year Examination Question]

Past Year Exam Question (2016) ECB4313 ADVANCED ELECTRICAL MACHINES. [Past Year Examination Question]

Past Year Exam Question (2016) ECB4313 EBB4313 ADVANCED ELECTRICAL MACHINES. [Past Year Examination Question]

Past Year Exam Question (2016) ECB4333 ADVANCED POWER SYSTEMS. [Past Year Examination Question]

Past Year Exam Question (2016) ECB4413 COMPUTER SYSTEMS ARCHITECTURE. [Past Year Examination Question]

Past Year Exam Question (2016) EDB1013 CIRCUIT THEORY. [Past Year Examination Question]

Past Year Exam Question (2016) EDB1063 NETWORK ANALYSIS. [Past Year Examination Question]

Past Year Exam Question (2016) EDB1603 ELECTRICAL TECHNOLOGY. [Past Year Examination Question]

Past Year Exam Question (2016) EDB2034 ECB2113 ANALOGUE ELECTRONICS / ANALOGUE ELECTRONICS I. [Past Year Examination Question]

Past Year Exam Question (2016) EDB3013 INSTRUMENTATION & MEASUREMENT. [Past Year Examination Question]

Past Year Exam Question (2016) EDB3043 ECB2153 MICROELECTRONICS CIRCUITS ANALOG ELECTRONICS II. [Past Year Examination Question]

Past Year Exam Question (2016) FCM1023 FDM1023 ORDINARY DIFFERENTIAL EQUATION. [Past Year Examination Question]

Past Year Exam Question (2016) FCM1033 FDM1033 VECTOR CALCULUS. [Past Year Examination Question]

Past Year Exam Question (2016) FCM2043 FDM2043 EBB2143 COMPUTATIONAL METHODS. [Past Year Examination Question]

Past Year Exam Question (2016) FCM2063 FDM2063 PROBABILITY & STATISTICS. [Past Year Examination Question]

Past Year Exam Question (2016) FDM1023 FCM1023 ORDINARY DIFFERENTIAL EQUATIONS. [Past Year Examination Question]

Past Year Exam Question (2016) GCB1013 GDB2013 BUSINESS ACCOUNTING. [Past Year Examination Question]

Past Year Exam Question (2016) GCB1033 GDB1033 MANAGEMENT AND ORGANIZATIONAL BEHAVIOUR. [Past Year Examination Question]

Past Year Exam Question (2016) GCB1043 GDB2043 PRINCIPLE OF MARKETING. [Past Year Examination Question]

Past Year Exam Question (2016) GCB1053 GDB2053 PRINCIPLES OF FINANCE. [Past Year Examination Question]

Past Year Exam Question (2016) GCB2013 SDB2133 STATISTICS AND EMPIRICAL METHOD. [Past Year Examination Question]

Past Year Exam Question (2016) GCB3023 GDB3033 CORPORATE FINANCE. [Past Year Examination Question]

Past Year Exam Question (2016) GCB3053 GDB3073 HUMAN RESOURCE MANAGEMENT. [Past Year Examination Question]

Past Year Exam Question (2016) GCB3073 GDB3043 INTERNATIONAL FINANCIAL MANAGEMENT. [Past Year Examination Question]

Past Year Exam Question (2016) GCB3093 GDB3013 SMALL BUSINESS AND ENTREPRENEURSHIP. [Past Year Examination Question]

Past Year Exam Question (2016) GCB3113 GDB3103 BUSINESS AND CYBER LAW. [Past Year Examination Question]

Past Year Exam Question (2016) GCB3123 MANAGEMENT ACCOUNTING. [Past Year Examination Question]

Past Year Exam Question (2016) GCB3133 GDB3063 PERSONAL FINANCIAL MANAGEMENT. [Past Year Examination Question]

Past Year Exam Question (2016) GCB3173 ENGINEERING ECONOMICS AND ENTREPRENEURSHIP. [Past Year Examination Question]

Past Year Exam Question (2016) GCB3173 GDB3023 ENGINEERING ECONOMICS AND ENTREPRENEURSHIP. [Past Year Examination Question]

Past Year Exam Question (2016) GDB1023 GCB2023 ECONOMICS. [Past Year Examination Question]

Past Year Exam Question (2016) GDB1033 GCB1033 MANAGEMENT & ORGANIZATIONAL BEHAVIOUR. [Past Year Examination Question]

Past Year Exam Question (2016) GDB2033 GCB2033 INTRODUCTION TO MANAGEMENT. [Past Year Examination Question]

Past Year Exam Question (2016) GDB2053 GCB1053 PRINCIPLES OF FINANCE. [Past Year Examination Question]

Past Year Exam Question (2016) GDB2063 FINANCIAL SYSTEM IN MALAYSIA. [Past Year Examination Question]

Past Year Exam Question (2016) GDB2063 FINANCIAL SYSTEMS IN MALAYSIA. [Past Year Examination Question]

Past Year Exam Question (2016) GDB2073 THE MALAYSIAN ECONOMY. [Past Year Examination Question]

Past Year Exam Question (2016) GDB2083 ASSET MANAGEMENT IN MALAYSIA. [Past Year Examination Question]

Past Year Exam Question (2016) GDB2093 BUSINESS VENTURES. [Past Year Examination Question]

Past Year Exam Question (2016) GDB3013 GCB3093 SMALL BUSINESS AND ENTREPRENEURSHIP. [Past Year Examination Question]

Past Year Exam Question (2016) GDB3023 GCB3173 ENGINEERING ECONOMICS AND ENTREPRENEURSHIP. [Past Year Examination Question]

Past Year Exam Question (2016) GDB3033 GCB3023 CORPORATE FINANCE. [Past Year Examination Question]

Past Year Exam Question (2016) GDB3043 GCB3073 INTERNATIONAL FINANCIAL MANAGEMENT. [Past Year Examination Question]

Past Year Exam Question (2016) GDB3053 GCB3083 INVESTMENT AND PORTFOLIO MANAGEMENT. [Past Year Examination Question]

Past Year Exam Question (2016) GDB3063 GCB3133 PERSONAL FINANCIAL MANAGEMENT, PERSONAL FINANCE. [Past Year Examination Question]

Past Year Exam Question (2016) GDB3073 GCB3053 HUMAN RESOURCE MANAGEMENT. [Past Year Examination Question]

Past Year Exam Question (2016) GDB3073 GCB3053 HUMAN RESOURCES MANAGEMENT. [Past Year Examination Question]

Past Year Exam Question (2016) GDB3083 GCB3063 INTERNATIONAL BUSINESS. [Past Year Examination Question]

Past Year Exam Question (2016) GDB3093 GCB3103 STRATEGIC MANAGEMENT. [Past Year Examination Question]

Past Year Exam Question (2016) GDB3103 GCB3113 BUSINESS AND CYBER LAW. [Past Year Examination Question]

Past Year Exam Question (2016) GDB3113 HCB2043 CORPORATE COMMUNICATION. [Past Year Examination Question]

Past Year Exam Question (2016) HCB2023 ISLAMIC KNOWLEDGE AND SCIENCE. [Past Year Examination Question]

Past Year Exam Question (2016) HCB2023 ISLAMIC KNOWLEDGE AND SCIENCES. [Past Year Examination Question]

Past Year Exam Question (2016) HCB2053 INTRODUCTION TO SOSIAL AND POLITICAL SCIENCE. [Past Year Examination Question]

Past Year Exam Question (2016) HCB2063 GENERAL PSYCHOLOGY. [Past Year Examination Question]

Past Year Exam Question (2016) HDB2043 ISLAMIC CRITICAL THINKING. [Past Year Examination Question]

Past Year Exam Question (2016) HDB2053 ISLAMIC & CONTEMPORARY LEADERSHIP. [Past Year Examination Question]

Past Year Exam Question (2016) HDB2063 STRESS MANAGEMENT SKILLS. [Past Year Examination Question]

Past Year Exam Question (2016) HDB2073 INNOVATION & CREATIVITY SKILLS. [Past Year Examination Question]

Past Year Exam Question (2016) HDB2073 INNOVATION AND CREATIVITY SKILLS. [Past Year Examination Question]

Past Year Exam Question (2016) HDB2083 PROBLEM SOLVING AND DECISION MAKING. [Past Year Examination Question]

Past Year Exam Question (2016) HDB2093 RELIGIONS IN MALAYSIA. [Past Year Examination Question]

Past Year Exam Question (2016) HDB2103 CULTURAL DIVERSITY IN MALAYSIA. [Past Year Examination Question]

Past Year Exam Question (2016) HDB2113 DAKWAH IN MALAYSIA. [Past Year Examination Question]

Past Year Exam Question (2016) HDB2123 WORKPLACE SAFETY IN MALAYSIA. [Past Year Examination Question]

Past Year Exam Question (2016) HDB2143 MALAYSIA AND GLOBAL GEOPOLITICS. [Past Year Examination Question]

Past Year Exam Question (2016) HDB2153 GCB3013 ETHICS & SOCIAL RESPONSIBILITY, CORPORATE ETHICS. [Past Year Examination Question]

Past Year Exam Question (2016) HDB2153 GCB3013 MPW2143 MPW2153 ETHICS AND SOCIAL RESPONSIBILITY CORPORATE ETHICS. [Past Year Examination Question]

Past Year Exam Question (2016) LCB2013 BASIC ARABIC COMMUNICATION. [Past Year Examination Question]

Past Year Exam Question (2016) LCB2013 LDB2013 BASIC ARABIC COMMUNICATION. [Past Year Examination Question]

Past Year Exam Question (2016) LCB2023 MANDARIN. [Past Year Examination Question]

Past Year Exam Question (2016) LCB2033 LDB2063 FRENCH LANGUAGE BASIC FRENCH COMMUNICATION. [Past Year Examination Question]

Past Year Exam Question (2016) LCB2053 LDB2043 TECHNICAL WRITING TECHNICAL AND PROFESSIONAL WRITING. [Past Year Examination Question]

Past Year Exam Question (2016) LCB2063 BASIC KOREAN COMMUNICATION. [Past Year Examination Question]

Past Year Exam Question (2016) LDB1042 LCB1042 ACADEMIC WRITING. [Past Year Examination Question]

Past Year Exam Question (2016) LDB1042 LCB1042 LBB1042 ACADEMIC WRITING. [Past Year Examination Question]

Past Year Exam Question (2016) LDB2013 LCB2013 BASIC ARABIC COMMUNICATION. [Past Year Examination Question]

Past Year Exam Question (2016) LDB2023 LCB2023 BASIC MANDARIN COMMUNICATION MANDARIN LANGUAGE. [Past Year Examination Question]

Past Year Exam Question (2016) LDB2033 MPW2113 BAHASA KEBANGSAAN A (LOCAL ONLY). [Past Year Examination Question]

Past Year Exam Question (2016) LDB2043 LCB2053 TECHNICAL WRITING, TECHNICAL & PROFESSIONAL WRITING. [Past Year Examination Question]

Past Year Exam Question (2016) LDB2053 LCB2063 BASIC KOREAN COMMUNICATION. [Past Year Examination Question]

Past Year Exam Question (2016) LDB2063 LCB2033 BASIC FRENCH COMMUNICATION. [Past Year Examination Question]

Past Year Exam Question (2016) LDB2083 BASIC JAPANESE COMMUNICATION. [Past Year Examination Question]

Past Year Exam Question (2016) MBB2094 MCB3013 MDB3013 CONTROL SYSTEMS. [Past Year Examination Question]

Past Year Exam Question (2016) MBB4133 MCB4123 VEHICLE DYNAMICS. [Past Year Examination Question]

Past Year Exam Question (2016) MCB1012 MDB1022 INTRODUCTION TO MATERIAL SCIENCE. [Past Year Examination Question]

Past Year Exam Question (2016) MCB1033 MDB1033 ELECTRICAL POWER AND MACHINES. [Past Year Examination Question]

Past Year Exam Question (2016) MCB1053 STATICS. [Past Year Examination Question]

Past Year Exam Question (2016) MCB2013 MDB2013 FLUID MECHANICS I. [Past Year Examination Question]

Past Year Exam Question (2016) MCB2043 MDB2043 DYNAMICS. [Past Year Examination Question]

Past Year Exam Question (2016) MCB2053 FLUID MECHANICS II. [Past Year Examination Question]

Past Year Exam Question (2016) MCB2053 MDB2053 FLUID MECHANICS II. [Past Year Examination Question]

Past Year Exam Question (2016) MCB3023 MDB3023 ENGINEERING MATERIALS. [Past Year Examination Question]

Past Year Exam Question (2016) MCB3043 MDB3043 MECHANICS OF MACHINES. [Past Year Examination Question]

Past Year Exam Question (2016) MCB3103 MDB3093 VIBRATION. [Past Year Examination Question]

Past Year Exam Question (2016) MCB4123 VEHICLE DYNAMICS. [Past Year Examination Question]

Past Year Exam Question (2016) MCB4223 ENERGY MANAGEMENT. [Past Year Examination Question]

Past Year Exam Question (2016) MCB4233 REFRIGERATION AND AIR CONDITIONING. [Past Year Examination Question]

Past Year Exam Question (2016) MCB4233 REFRIGERATION AND AIR-CONDITIONING. [Past Year Examination Question]

Past Year Exam Question (2016) MCB4433 FAILURE ANALYSIS AND NON DESTRUCTIVE EXAMINATION. [Past Year Examination Question]

Past Year Exam Question (2016) MCB4433 FAILURE ANALYSIS AND NON-DESTRUCTIVE EXAMINATION. [Past Year Examination Question]

Past Year Exam Question (2016) MCB4513 FLOW ASSURANCE IN PIPELINES AND FLOW-LINES. [Past Year Examination Question]

Past Year Exam Question (2016) MCB4623 PLANT EQUIPMENT DESIGN. [Past Year Examination Question]

Past Year Exam Question (2016) MDB2023 MECHANICAL ENGINEERING THERMODYNAMICS I. [Past Year Examination Question]

Past Year Exam Question (2016) MDB2034 MCB2034 MBB2043 SOLID MECHANICS. [Past Year Examination Question]

Past Year Exam Question (2016) MDB2063 MECHANICAL ENGINEERING THERMODYNAMICS II. [Past Year Examination Question]

Past Year Exam Question (2016) MDB3033 MCB3033 MBB3033 HEAT TRANSFER. [Past Year Examination Question]

Past Year Exam Question (2016) MDB3053 NUMERICAL METHODS. [Past Year Examination Question]

Past Year Exam Question (2016) MDB3073 MCB3073 MANUFACTURING TECHNOLOGY II. [Past Year Examination Question]

Past Year Exam Question (2016) MDB3083 MECHANICAL ENGINEERING DESIGN. [Past Year Examination Question]

Past Year Exam Question (2016) MPU3143 MPW2123 BAHASA MELAYU KOMUNIKASI 2 BAHASA KEBANGSAAN B. [Past Year Examination Question]

Past Year Exam Question (2016) MPU3143 MPW2123 BAHASA MELAYU KOMUNIKASI 2, BAHASA KEBANGSAAN B. [Past Year Examination Question]

Past Year Exam Question (2016) MPU3143 MPW2123 BAHASA MELAYU KOMUNIKASI2 BAHASA KEBANGSAAN B. [Past Year Examination Question]

Past Year Exam Question (2016) MPU3173 MALAYSIAN STUDIES 3. [Past Year Examination Question]

Past Year Exam Question (2016) MPU3173 MALAYSIAN STUDIES 3 (PENGAJIAN MALAYSIA 3). [Past Year Examination Question]

Past Year Exam Question (2016) MPW2133 MALAYSIAN STUDIES. [Past Year Examination Question]

Past Year Exam Question (2016) PCB2023 PDB2023 RESERVOIR ENGINEERING I. [Past Year Examination Question]

Past Year Exam Question (2016) PCB2033 PDB3033 DRILLING ENGINEERING 1. [Past Year Examination Question]

Past Year Exam Question (2016) PCB2044 PDB2044 WELL LOGGING AND FORMATION EVALUATION. [Past Year Examination Question]

Past Year Exam Question (2016) PCB3023 PETROLEUM ECONOMICS. [Past Year Examination Question]

Past Year Exam Question (2016) PCB3043 WELL DESIGN AND COMPLETION. [Past Year Examination Question]

Past Year Exam Question (2016) PCB3053 PDB3053 RESERVOIR MODELLING AND SIMULATION. [Past Year Examination Question]

Past Year Exam Question (2016) PCB4013 GAS FIELD ENGINEERING. [Past Year Examination Question]

Past Year Exam Question (2016) PCB4133 ADVANCED RESERVOIR SIMULATION. [Past Year Examination Question]

Past Year Exam Question (2016) PCB4213 ADVANCED DRILLING ENGINEERING. [Past Year Examination Question]

Past Year Exam Question (2016) PCB4323 WELL STIMULATION TECHNIQUE. [Past Year Examination Question]

Past Year Exam Question (2016) PDB1013 PCB1013 STATICS AND DYNAMICS. [Past Year Examination Question]

Past Year Exam Question (2016) PDB1034 RESERVOIR ROCK AND FLUID PROPERTIES. [Past Year Examination Question]

Past Year Exam Question (2016) PDB2012 PCB2013 RESERVOIR GEOSCIENCE. [Past Year Examination Question]

Past Year Exam Question (2016) PDB3013 WELL TEST ANALYSIS. [Past Year Examination Question]

Past Year Exam Question (2016) PDB3023 RESERVOIR ENGINEERING II. [Past Year Examination Question]

Past Year Exam Question (2016) PDB3043 PCB3063 PRODUCTION ENGINEERING I. [Past Year Examination Question]

Past Year Exam Question (2016) PDB3053 PCB3053 RESERVOIR MODELING & SIMULATION. [Past Year Examination Question]

Past Year Exam Question (2016) PDB3063 DRILLING ENGINEERING II. [Past Year Examination Question]

Past Year Exam Question (2016) PDB3073 PCB3073 PRODUCTION ENGINEERING II. [Past Year Examination Question]

Past Year Exam Question (2016) QAB1043 QBB1043 MINERALOGY & PETROGRAPHY. [Past Year Examination Question]

Past Year Exam Question (2016) QAB2033 QBB3033 CARBONATE SEDIMENTOLOGY AND PETROGRAPHY. [Past Year Examination Question]

Past Year Exam Question (2016) QAB3013 SEISMIC WAVE AND IMAGING. [Past Year Examination Question]

Past Year Exam Question (2016) QAB3023 ROCK PHYSICS AND AVO ANALYSIS. [Past Year Examination Question]

Past Year Exam Question (2016) QAB3043 RESERVOIR CHARACTERIZATION & GEOLOGICAL MODELING. [Past Year Examination Question]

Past Year Exam Question (2016) QAB3043 RESERVOIR CHARACTERIZATION AND GEOLOGICAL MODELING. [Past Year Examination Question]

Past Year Exam Question (2016) QAB4013 REGIONAL & PETROLEUM GEOLOGY OF MALAYSIA & SEA. [Past Year Examination Question]

Past Year Exam Question (2016) QAB4013 REGIONAL AND PETROLEUM GEOLOGY OF MALAYSIA AND SEA. [Past Year Examination Question]

Past Year Exam Question (2016) QAB4053 GEODYNAMICS & BASIN DEVELOPMENT (ME). [Past Year Examination Question]

Past Year Exam Question (2016) QAB4053 GEODYNAMICS AND BASIN DEVELOPMENT. [Past Year Examination Question]

Past Year Exam Question (2016) QAB4063 PETROLEUM GEOCHEMISTRY & BASIN MODELLING(ME). [Past Year Examination Question]

Past Year Exam Question (2016) QAB4063 PETROLEUM GEOCHEMISTRY AND BASIN MODELLING. [Past Year Examination Question]

Past Year Exam Question (2016) QAB4073 GEOMECHANICS & FRACTURED RESERVOIRS(ME). [Past Year Examination Question]

Past Year Exam Question (2016) QAB4073 GEOMECHANICS AND FRACTURED RESERVOIRS. [Past Year Examination Question]

Past Year Exam Question (2016) QAB4083 SEISMIC DATA PROCESSING. [Past Year Examination Question]

Past Year Exam Question (2016) QAB4103 NON SEISMIC METHODS. [Past Year Examination Question]

Past Year Exam Question (2016) QAB4103 NON SEISMIC METHODS(ME). [Past Year Examination Question]

Past Year Exam Question (2016) QBB1013 PHYSICAL GEOLOGY. [Past Year Examination Question]

Past Year Exam Question (2016) QBB1022 FUNDAMENTALS OF GEOPHYSICS. [Past Year Examination Question]

Past Year Exam Question (2016) QBB1053 STRUCTURAL GEOLOGY. [Past Year Examination Question]

Past Year Exam Question (2016) QBB1063 EARTH PROCESSES. [Past Year Examination Question]

Past Year Exam Question (2016) QBB2012 PALEONTOLOGY. [Past Year Examination Question]

Past Year Exam Question (2016) QBB2013 GEOCHEMISTRY. [Past Year Examination Question]

Past Year Exam Question (2016) QBB2022 PETROLEUM GEOLOGY. [Past Year Examination Question]

Past Year Exam Question (2016) QBB2023 CLASTIC SEDIMENTOLOGY & PETROGRAPHY. [Past Year Examination Question]

Past Year Exam Question (2016) QBB2023 CLASTIC SEDIMENTOLOGY AND PETROGRAPHY. [Past Year Examination Question]

Past Year Exam Question (2016) QBB2032 PRINCIPLES OF STRATIGRAPHY. [Past Year Examination Question]

Past Year Exam Question (2016) QBB2033 SEISMIC METHODS. [Past Year Examination Question]

Past Year Exam Question (2016) QBB2043 SEISMIC INTERPRETATION. [Past Year Examination Question]

Past Year Exam Question (2016) QBB3013 REGIONAL & PETROLEUM GEOLOGY OF MALAYSIA & SEA. [Past Year Examination Question]

Past Year Exam Question (2016) QBB3023 BASIN ANALYSIS. [Past Year Examination Question]

Past Year Exam Question (2016) QBB3043 GEOLOGICAL DATA ANALYSIS. [Past Year Examination Question]

Past Year Exam Question (2016) QBB3053 ATTRIBUTES AND 3D VOLUME INTERPRETATION. [Past Year Examination Question]

Past Year Exam Question (2016) QBB3054 WELL LOGGING AND SUBSURFACE MAPPING. [Past Year Examination Question]

Past Year Exam Question (2016) QBB3063 PETROLEUM ENGINEERING FOR GEOSCIENCES. [Past Year Examination Question]

Past Year Exam Question (2016) SCB3293 ENTERPRISE ARCHITECTURE. [Past Year Examination Question]

Past Year Exam Question (2016) SCB3303 ENTERPRISE INFORMATION SYSTEMS DEVELOPMENT. [Past Year Examination Question]

Past Year Exam Question (2016) SCB3343 DATA MINING AND KNOWLEDGE DISCOVERY. [Past Year Examination Question]

Past Year Exam Question (2016) SCB3363 KNOWLEDGE MANAGEMENT SYSTEM. [Past Year Examination Question]

Past Year Exam Question (2016) SCB3373 FUNDAMENTAL OF KNOWLEDGE MANAGEMENT. [Past Year Examination Question]

Past Year Exam Question (2016) SCB3443 ENTERPRISE DATA MANAGEMENT AND ANALYSIS. [Past Year Examination Question]

Past Year Exam Question (2016) SDB1113 SCB1033 DATA AND INFORMATION MANAGEMENT. [Past Year Examination Question]

Past Year Exam Question (2016) SDB1123 SCB2053 SYSTEMS ANALYSIS AND DESIGN. [Past Year Examination Question]

Past Year Exam Question (2016) SDB2133 GCB2013 STATISTICS AND EMPIRICAL METHOD. [Past Year Examination Question]

Past Year Exam Question (2016) SDB3113 DATABASE ADMINISTRATION. [Past Year Examination Question]

Past Year Exam Question (2016) SDB3113 SCB3163 DATABASE ADMINISTRATION. [Past Year Examination Question]

Past Year Exam Question (2016) SDB3123 IT RISK AND AUDITING. [Past Year Examination Question]

Past Year Exam Question (2016) SDB3123 SCB3023 IT RISK AND AUDITTING / IS STRATEGY AND PLANNING. [Past Year Examination Question]

Past Year Exam Question (2016) TCB1033 TDB2143 WEB APPLICATION DEVELOPMENT. [Past Year Examination Question]

Past Year Exam Question (2016) TCB1063 TDB1023 ALGORITHM AND DATA STRUCTURE. [Past Year Examination Question]

Past Year Exam Question (2016) TCB2023 TDB2043 OPERATING SYSTEMS. [Past Year Examination Question]

Past Year Exam Question (2016) TCB2043 TDB2163 SOFTWARE ENGINEERING. [Past Year Examination Question]

Past Year Exam Question (2016) TCB2053 TDB2153 OBJECT ORIENTED PROGRAMMING. [Past Year Examination Question]

Past Year Exam Question (2016) TCB2073 TDB2073 STRUCTURED PROGRAMMING AND DATABASE SYSTEM. [Past Year Examination Question]

Past Year Exam Question (2016) TCB2083 TDB2053 WIRELESS TECHNOLOGY. [Past Year Examination Question]

Past Year Exam Question (2016) TCB3313 SOFTWARE DESIGN AND ARCHITECTURE. [Past Year Examination Question]

Past Year Exam Question (2016) TCB3313 TDB4323 SOFTWARE DESIGN AND ARCHITECTURE. [Past Year Examination Question]

Past Year Exam Question (2016) TCB3323 TDB4333 SOFTWARE TESTING AND QUALITY ASSURANCE. [Past Year Examination Question]

Past Year Exam Question (2016) TCB3333 EMBEDDED SYSTEMS. [Past Year Examination Question]

Past Year Exam Question (2016) TDB1013 DISCRETE MATHEMATICS. [Past Year Examination Question]

Past Year Exam Question (2016) TDB1013 FCM1013 DISCRETE MATHEMATICS. [Past Year Examination Question]

Past Year Exam Question (2016) TDB1023 TCB1063 ALGORITHM AND DATA STRUCTURE. [Past Year Examination Question]

Past Year Exam Question (2016) TDB1113 STRUCTURED PROGRAMMING. [Past Year Examination Question]

Past Year Exam Question (2016) TDB1113 TCB1013 STRUCTURED PROGRAMMING. [Past Year Examination Question]

Past Year Exam Question (2016) TDB1123 COMPUTER ORGANISATION. [Past Year Examination Question]

Past Year Exam Question (2016) TDB1133 DATA COMMUNICATIONS AND NETWORKING. [Past Year Examination Question]

Past Year Exam Question (2016) TDB1133 TCB1083 DATA COMMUNICATIONS AND NETWORKING. [Past Year Examination Question]

Past Year Exam Question (2016) TDB2033 HUMAN COMPUTER INTERACTION. [Past Year Examination Question]

Past Year Exam Question (2016) TDB2043 OPERATING SYSTEMS. [Past Year Examination Question]

Past Year Exam Question (2016) TDB2053 WIRELESS TECHNOLOGY. [Past Year Examination Question]

Past Year Exam Question (2016) TDB2073 TCB2073 STRUCTURED PROGRAMMING AND DATABASE SYSTEM. [Past Year Examination Question]

Past Year Exam Question (2016) TDB2143 WEB APPLICATION DEVELOPMENT. [Past Year Examination Question]

Past Year Exam Question (2016) TDB2153 OBJECT ORIENTED PROGRAMMING. [Past Year Examination Question]

Past Year Exam Question (2016) TDB2163 TCB2043 SOFTWARE ENGINEERING. [Past Year Examination Question]

Past Year Exam Question (2016) TDB3063 DISTRIBUTED COMPUTING. [Past Year Examination Question]

Past Year Exam Question (2016) TDB3063 TCB3023 DISTRIBUTED COMPUTING. [Past Year Examination Question]

Past Year Exam Question (2016) TDB3073 NETWORK SECURITY. [Past Year Examination Question]

Past Year Exam Question (2016) TDB3073 TCCB2063 NETWORK SECURITY. [Past Year Examination Question]

Past Year Exam Question (2016) TDB3173 TCB3073 IT PROJECT MANAGEMENT. [Past Year Examination Question]

Past Year Exam Question (2016) VCB 4133 DEEPWATER TECHNOLOGY. [Past Year Examination Question]

Past Year Exam Question (2016) VCB1023 VDB1023 ENGINEERING MECHANICS. [Past Year Examination Question]

Past Year Exam Question (2016) VCB2013 VDB1063 SOLID MECHANICS, MECHANICS OF SOLIDS. [Past Year Examination Question]

Past Year Exam Question (2016) VCB2023 VDB2013 CIVIL ENGINEERING MATERIALS. [Past Year Examination Question]

Past Year Exam Question (2016) VCB2043 VDB2053 GEOTECHNICAL ENGINEERING. [Past Year Examination Question]

Past Year Exam Question (2016) VCB3013 VDB2063 STRUCTURAL ANALYSIS. [Past Year Examination Question]

Past Year Exam Question (2016) VCB3013 VDB2063 STRUCTURAL ANALYSYS. [Past Year Examination Question]

Past Year Exam Question (2016) VCB3022 VDB3032 DESIGN OF STEEL STRUCTURES. [Past Year Examination Question]

Past Year Exam Question (2016) VCB3033 VDB2023 ENVIRONMENTAL ENGINEERING. [Past Year Examination Question]

Past Year Exam Question (2016) VCB3043 VDB3023 DESIGN OF FOUNDATION. [Past Year Examination Question]

Past Year Exam Question (2016) VCB3043 VDB3023 FOUNDATION AND EARTH STRUCTURE, DESIGN OF FOUNDATION. [Past Year Examination Question]

Past Year Exam Question (2016) VCB3053 VDB3043 HYDROLOGY. [Past Year Examination Question]

Past Year Exam Question (2016) VCB3064 VDB3063 DESIGN OF REINFORCED CONCRETE STRUCTURE. [Past Year Examination Question]

Past Year Exam Question (2016) VCB3064 VDB3063 DESIGN OF REINFORCED CONCRETE STRUCTURES. [Past Year Examination Question]

Past Year Exam Question (2016) VCB3073 VDB3073 WASTEWATER ENGINEERING. [Past Year Examination Question]

Past Year Exam Question (2016) VCB3073 WASTEWATER ENGINEERING. [Past Year Examination Question]

Past Year Exam Question (2016) VCB3083 VDB3054 HIGHWAY ENGINEERING, HIGHWAY AND TRAFFIC ENGINEERING. [Past Year Examination Question]

Past Year Exam Question (2016) VCB4013 VDB3013 CONSTRUCTION PROJECT MANAGEMENT. [Past Year Examination Question]

Past Year Exam Question (2016) VCB4043 ENGINEEERS IN SOCIETY. [Past Year Examination Question]

Past Year Exam Question (2016) VCB4043 ENGINEERS IN SOCIETY. [Past Year Examination Question]

Past Year Exam Question (2016) VCB4113 OFFSHORE STRUCTURES. [Past Year Examination Question]

Past Year Exam Question (2016) VCB4123 OFFSHORE GEOTECHNICS AND GEOHAZARDS. [Past Year Examination Question]

Past Year Exam Question (2016) VCB4133 DEEPWATER TECHNOLOGY. [Past Year Examination Question]

Past Year Exam Question (2016) VCB4213 DESIGN OF COASTAL STRUCTURES. [Past Year Examination Question]

Past Year Exam Question (2016) VCB4213 DESIGNS OF COASTAL STRUCTURES. [Past Year Examination Question]

Past Year Exam Question (2016) VCB4223 VDB4213 OCEAN AND COASTAL ENGINEERING. [Past Year Examination Question]

Past Year Exam Question (2016) VCB4233 VDB4233 COASTAL PLANNING AND MANAGEMENT. [Past Year Examination Question]

Past Year Exam Question (2016) VCB4323 RENEWABLE TECHNOLOGY. [Past Year Examination Question]

Past Year Exam Question (2016) VCB4333 SUSTAINABLE MANAGEMENT OF BUSINESS AND COMMUNICATION. [Past Year Examination Question]

Past Year Exam Question (2016) VCB4413 SLUDGE MANAGEMENT AND DISPOSAL. [Past Year Examination Question]

Past Year Exam Question (2016) VCB4413 SLUDGE MANAGEMENT AND DISPOSSAL. [Past Year Examination Question]

Past Year Exam Question (2016) VCB4423 SOLID AND HAZARDOUS WASTES ENGINEERING. [Past Year Examination Question]

Past Year Exam Question (2016) VCB4433 MARINE POLLUTION AND CONTROL. [Past Year Examination Question]

Past Year Exam Question (2016) VCB4523 CONSTRUCTION ENGINEERING AND TECHNOLOGY. [Past Year Examination Question]

Past Year Exam Question (2016) VCB4533 VALUE ENGINEERING AND RISK MANAGEMENT. [Past Year Examination Question]

Past Year Exam Question (2016) VDB1023 ENGINEERING MECHANICS. [Past Year Examination Question]

Past Year Exam Question (2016) VDB1033 GEOLOGY FOR ENGINEERS. [Past Year Examination Question]

Past Year Exam Question (2016) VDB1042 GEOMATICS. [Past Year Examination Question]

Past Year Exam Question (2016) VDB1042 VCB1043 GEOMATICS. [Past Year Examination Question]

Past Year Exam Question (2016) VDB1052 ENGINEERING FLUID MECHANICS. [Past Year Examination Question]

Past Year Exam Question (2016) VDB1063 MECHANICS OF SOLIDS. [Past Year Examination Question]

Past Year Exam Question (2016) VDB2013 CIVIL ENGINEERING MATERIALS. [Past Year Examination Question]

Past Year Exam Question (2016) VDB2033 HYDRAULICS. [Past Year Examination Question]

Past Year Exam Question (2016) VDB2043 THEORY OF STRUCTURE. [Past Year Examination Question]

Past Year Exam Question (2016) VDB2043 THEORY OF STURCTURES. [Past Year Examination Question]

Past Year Exam Question (2016) VDB2053 GEOTECHNICAL ENGINEERING. [Past Year Examination Question]

Past Year Exam Question (2016) VDB3032 DESIGN OF STEEL STRUCTURES. [Past Year Examination Question]

Past Year Exam Question (2016) VDB3043 VCB3053 HYDROLOGY. [Past Year Examination Question]

Past Year Exam Question (2016) VDB3054 HIGHWAY AND TRAFFIC ENGINEERING. [Past Year Examination Question]

Past Year Exam Question (2016) VDB3083 URBAN WATER SYSTEM DESIGN. [Past Year Examination Question]

Past Year Exam Question (2016) YAB1013 INORGANIC CHEMISTRY. [Past Year Examination Question]

Past Year Exam Question (2016) YAB1033 ANALYTICAL CHEMISTRY. [Past Year Examination Question]

Past Year Exam Question (2016) YAB2013 ORGANIC CHEMISTRY II. [Past Year Examination Question]

Past Year Exam Question (2016) YAB2023 PHYSICAL CHEMISTRY II. [Past Year Examination Question]

Past Year Exam Question (2016) YAB2032 SEPARATION PROCESS. [Past Year Examination Question]

Past Year Exam Question (2016) YAB2062 ANALYTICAL INSTRUMENTATION. [Past Year Examination Question]

Past Year Exam Question (2016) YAB2073 QUANTUM CHEMISTRY. [Past Year Examination Question]

Past Year Exam Question (2016) ZAB1013 MECHANICS. [Past Year Examination Question]

Past Year Exam Question (2016) ZAB1023 THERMODYNAMICS. [Past Year Examination Question]

Past Year Exam Question (2016) ZAB1043 MATHEMATICAL METHODS FOR PHYSICS. [Past Year Examination Question]

Past Year Exam Question (2016) ZAB2024 QUANTUM MECHANICS. [Past Year Examination Question]

Past Year Exam Question (2016) ZAB2033 OPTICS. [Past Year Examination Question]

Past Year Exam Question (2016) ZAB2043 VIBRATION AND WAVES. [Past Year Examination Question]

Past Year Exam Question (2016) ZAB2053 ELECTROMAGNETICS II. [Past Year Examination Question]

Past Year Exam Question (2016) ZAB2063 ATOMIC PHYSICS. [Past Year Examination Question]

Past Year Exam Question (2016) ZAB2072 PHILOSOPHY OF SCIENCE & TECHNOLOGY. [Past Year Examination Question]

Past Year Exam Question (2016) ZAB2072 PHILOSOPHY OF SCIENCE AND TECHNOLOGY. [Past Year Examination Question]

Pham, Vuong Lam (2016) Development of Screening Method for Alcohol Use Disorder based on EEG Signal. Masters thesis, Universiti Teknologi PETRONAS.

Phoo , Khai Yong (2016) Portable EEG Systems for Application in Neuroergonomics. [Final Year Project] (Submitted)

Phu Huan, Vo Nguyen (2016) Numerical Simulation of Submarine Slide Generated Tsunami using Smoothed Particle Hydrodynamics Method. Doctoral thesis, Universiti Teknologi PETRONAS.

Ping, See Itt (2016) Investigation of Charging and Discharging Process in a Rotating Latent Heat Storage. [Final Year Project] (Submitted)

Pransisco, Prengki (2016) Synthesis and Characterization of NiZnCu Ferrite as Magnetic Feeder for Electromagnetic Transmitter. Masters thesis, Universiti Teknologi PETRONAS.

Purnomo, Eko Widi (2016) Energy Constrained Stochastic Elastic Inversion for Thin Bed-Reservoir Resolution. Doctoral thesis, Universiti Teknologi PETRONAS.

RAFLI, MUHAMMAD ASRAF (2016) WAVE HYDRODYNAMIC INTERACTION STUDY ON ARTIFICIAL REEF BREAKWATER. [Final Year Project] (Submitted)

RAHMAN, IMRAN (2016) OPTIMAL POWER ALLOCATION SCHEME FOR PLUG-IN HYBRID ELECTRIC VEHICLES USING SWARM INTELLIGENCE TECHNIQUES. Masters thesis, Universiti Teknologi PETRONAS.

RAJABI, MANSOURE SADAT (2016) IONIC LIQUIDS FOR EXTRACTION OF B CAROTENE: MODELING AND EXPERIMENTAL APPROACHES. Masters thesis, Universiti Teknologi PETRONAS.

RIZWAN NASIR, . (2016) SYNTHESIS, CHARACTERIZATION AND PERFORMANCE EVALUATION OF AMINE MIXED MATRIX MEMBRANES FOR CO2/CH4 SEPARATION. PhD. thesis, Universiti Teknologi PETRONAS.

ROSLI, NURFATIHAH SYALWIAH (2016) NEURAL NETWORK PREDICTION MODEL FOR FIELD INSTRUMENTS IN GAS METERING SYSTEM BASED ON PARTICLE SWARM OPTIMZATION. Masters thesis, Universiti Teknologi PETRONAS.

Rabie, Fatthie Khairullah Hishyam (2016) INFLUENCE OF TEMPERATURE ON STABILITY OF ALUMINUM FOAM CELL WALL DURING FOAMING PROCESS. [Final Year Project]

Rafeek, Mohamed Rizwan (2016) Adsorption and Desorption Mechanism of Oil Palm Empty Fruit Bunch Grafted Polyvinyl Alcohol (OPEFB-g-PVA) Hydrogel in Nickel(II) Removal. [Final Year Project] (Submitted)

Ragab Mousa, Mahmoud Shehata AbdAlfatah (2016) Experimental Evaluation of Zero Energy PG Office Under Natural and Forced Ventilation. [Final Year Project] (Submitted)

Rahman, Imran (2016) Optimal Power Allocation Scheme for Plug-in Hybrid Electric Vehicles using Swarm Intelligence Technique. Masters thesis, Universiti Teknologi PETRONAS.

Rahman, Shaikh Atikur (2016) Structural Response of Offshore Corrugated Blast Wall under Accidental Explosion. Masters thesis, Universiti Teknologi PETRONAS.

Raja Badrol Hisham, Raja Muhammad Nazirul Mubin (2016) FULLY AUTOMATED DIABETIC RETINOPATHY MONITORING AND GRADING SYSTEM. [Final Year Project] (Submitted)

Rajasegaan, Sarasuwathi (2016) Model Predictive Control for Tracking. [Final Year Project]

Ramachanderan, Mageshwaran (2016) Development and Char Morphology Analysis of Siloxane Based Intumescent Fire Retardant Coatings. [Final Year Project] (Submitted)

Ramali, Azlan (2016) Medicinal Compound Extraction from the Whole Body of Cynodon Dactylon (L.) Pers. by Using Hot Water. [Final Year Project] (Submitted)

Ramdan, Amira Nurain (2016) Experimental and Modelling Studies of CO2 Adsorption by Activated Carbon Derived from Rubber Seed Shell. [Final Year Project] (Submitted)

Ramlan, Farah Asyikin (2016) Outdoor Surveillance Camera Coverage For Process Plant. [Final Year Project] (Submitted)

Ramlee, Mohd Firdaus (2016) Heave Response of Truss Spar Due to Truss Member Losses. [Final Year Project]

Ramli, Mohammad Faiz (2016) Modeling and Control of a Pilot Plant Carbon Dioxide Absorption Column for High Carbon Dioxide Content Natural Gas. [Final Year Project] (Submitted)

Ramli, Muhammad Nurshafiq (2016) Analyze Performance of Torque Boosting Device. [Final Year Project] (Submitted)

Ramzi, Muhamad Syafiq (2016) Mineralogy and Geochemistry of the Black Shales, Selangor. [Final Year Project]

Ranjit Singh, Gurjit Kaur (2016) Plant Based Dye for Dye Sensitized Solar Cells (DSSC). [Final Year Project] (Submitted)

Ravichandran, Nalinii (2016) Parametric Study on Spectral Fatigue Analysis of Offshore Jacket Platform with SACS software. [Final Year Project] (Submitted)

Razali, Rodiah (2016) Removal of Synthetic Dyes By Adsorption Using Treated Oil Palm Waste Biomass. [Final Year Project] (Submitted)

Rehan, Muhammad Maaz (2016) Zoomout Geographic Location Service (ZGLS) : A Flat Quorum-based and Reliable Location Management Protocol for VANETs. Doctoral thesis, Universiti Teknologi PETRONAS.

Robin , Low Nyok Bing (2016) Free Vibration of Precast Cold-formed Composite Beam. [Final Year Project] (Submitted)

Roslan, Muhamad Fazril (2016) Power Flow Study for UTP Microgrid. [Final Year Project] (Submitted)

Roslan, Rabiatul Adawieah (2016) TORREFACTION OF EMPTY FRUIT BUNCH IN BIOMASS COMBUSTION GAS. [Final Year Project]

Roslee, Nur Aqilah (2016) Segmentation of MRI Prostate Images using Gaussian Mixture Models (GMMs). [Final Year Project] (Submitted)

Rosli, Nurfatihah Syalwiah (2016) Neural Network Prediction Model for Field Instruments in Gas Metering System Based on Particle Swarm Optimization. Masters thesis, Universiti Teknologi PETRONAS.

Rosli, Luqman Hakim Rosli (2016) Carbon dioxide removal from natural gas using dual layer-silica membrane on alumina support disk. [Final Year Project]

Rosli, Muhammad Anisuddin (2016) The Hydrodeoxygenation of Non-Edible Oil for Green Diesel Production. [Final Year Project] (Submitted)

Rosli, Muhammad Haiqal (2016) Intensification Strategy For Cost-Effective Hybrid Power System Using Power Pinch Analysis. [Final Year Project] (Submitted)

Rosli, Siti Noriayana (2016) Synthesis and Characterize Geopolymer as Erosion Mitigation for Seawater Application. [Final Year Project] (Submitted)

Rushdan, Muaz (2016) General Characteristics of Rain Triggered Shallow Landslide and Driven Landslide. [Final Year Project] (Submitted)

Ruslan, Ibtihal (2016) Parametric Study on Effectiveness of Heat Exchangers for Primary and Secondary Chilled Water Distribution Lines of an Academic Complex. [Final Year Project] (Submitted)

Ruslan, Nurquratul Atiqah (2016) Sedimentology and Structural Geology of Parit Sulong, Johor. [Final Year Project]

S/O Naranasamy, Arjun Raj (2016) Investigation on Filter Mechanism for Air Polluted Environment. [Final Year Project] (Submitted)

SAADON, SHAZLEEN (2016) TORREFACTION OF OIL PALM KERNEL SHELL IN THE ABSENCE AND PRESENCE OF OXYGEN AND CARBON DIOXIDE. Masters thesis, Universiti Teknologi PETRONAS.

SADEQ, QAYS MOHAMMED (2016) HETEROGENEITY, CONNECTIVITY AND GEOLOGICAL MODELING OF TERTIARY CARBONATE RESERVOIR IN BAI HASSAN OIL FIELD, NORTHERN IRAQ. PhD. thesis, Universiti Teknologi PETRONAS.

SADEQ, QAYS MOHAMMED (2016) HETEROGEJ\TEITY, CONJ\TECTIVITY AND GEOLOGICAL MODELING OF TERTIARY CARBONATE RESERVOIR TN BAI HASSAN OIL FIELD, NORTHERN IRAQ. PhD. thesis, Universiti Teknologi PETRONAS.

SAFDAR GARDEZI, SYED SHUJAA (2016) DEVELOPMENT OF LIFE CYCLE CARBON FOOTPRINT PREDICTION MODEL FOR HOUSING SECTOR OF MALAYSIA. PhD. thesis, Universiti Teknologi PETRONAS.

SAIPUDDIN, NURAMALINA (2016) PERFORMANCE ASSESSMENT OF AN OFF DESIGN AIR FINNED COOLER. [Final Year Project] (Submitted)

SALEH MOHAMMED AL-AQEL, ABDULLAH (2016) A NOVEL FLOATING SOLUTION FOR MARGINAL FIELDS IN CHALLENGING OIL ECONOMICS. [Final Year Project]

SALEM BASYOAL, OMAR AHMED (2016) Prediction of Cooling Load of a Glazed Building under Malaysia Weather Conditions. [Final Year Project] (Submitted)

SALVADOR MAMBO, ACACIO (2016) INVESTIGATION ON INCREMENTAL WAVE ANALYSIS METHOD IN JACKET PLATFORM REASSESSMENT. [Final Year Project]

SAMSUDIN, NUR SHAHIRA (2016) Investigation on Shortening of Post Closure Duration in a Hazardous Waste Landfill. [Final Year Project] (Submitted)

SAMSUDIN, SITY JUAEIRIAH (2016) THE PERFORMANCE OF ALLICIN IN ALLIUM SATIVUM AS UREASE BIO-INHIBITOR FOR UREA FERTILIZER APPLICATION. Masters thesis, Universiti Teknologi PETRONAS.

SAMSUDIN, YON NORASYIKIN (2016) DROPLET IMPACT BEHAVIOUR OF MODIFIED BIOPOLYMER ON UREA SURFACE: EFFECT OF FILLERS. Masters thesis, Universiti Teknologi PETRONAS.

SARWAR, MUHAMMAD BILAL (2016) Design and Development of Wireless Stakeout System based on ZigBee Transceiver Modules. Masters thesis, Universiti Teknologi PETRONAS.

SATHIVEL, SHALINI (2016) Prediction of Pore water Pressure Responses to Rainfall Using Auto Regressive Integrated Moving Average Method (ARIMA). [Final Year Project]

SAZALI, SYAZWAN (2016) Vortex Induced Vibration (VIV) Reduction Measure on Dimpled Concrete Coated Pipeline. [Final Year Project] (Submitted)

SENG, LEE WENG (2016) INTERACTIVE HANDWRITING RECOGNITION FOR COURSEWORK DATA ENTRY. [Final Year Project] (Submitted)

SHABIB ASL, ABDOLMOHSEN SHABIB ASL (2016) INVESTIGATION INTO THE EFFECTS OF LOW SALINITY WATER ION COMPOSITIONS ON WETT ABILITY ALTERATION DURING FOAM FLOODING. PhD. thesis, Universiti Teknologi PETRONAS.

SHAH, SYED NASIR (2016) DE-ACIDIFICATION OF CRUDE OIL USING IONIC LIQUIDS. PhD. thesis, Universiti Teknologi PETRONAS.

SHAHRUDIN, ALIA FARHANA (2016) Experimental Study on Dynamic Responses of Tension Leg Platform (TLP) Subjected to Short Crested Waves with Current. [Final Year Project] (Submitted)

SHAMIM, AMJAD (2016) Model Development for Customer Value Co-Creation Attitude and Behavior using Service Logic of Marketing. PhD. thesis, Universit Teknologi PETRONAS.

SHAMSUL KAMAR, FARAH AZLIN (2016) IMAGE STITCHING USING HARRIS CORNER & SIFT FEATURES. [Final Year Project] (Submitted)

SHERN, LEOW YENN (2016) Modelling of coastal flooding due to the dissolved CO2 in the ocean emitted from oil refinery. [Final Year Project] (Submitted)

SHETTY, NITIN (2016) MODIFIED THRESHOLD FOULING MODEL FOR CRUDE OILS. Masters thesis, Universiti Teknologi PETRONAS.

SIDDIQUI, NUMAIR AHMED (2016) RESERVOIR CHARACTERISTICS AND 2D-CONNECTIVITY MODELING OF NEOGENE SILICICLASTIC SHALLOW-MARINE SUCCESSIONS OF SARA W AK AND SABAH. MALAYSIA. PhD. thesis, Universiti Teknologi PETRONAS.

SOVANN , NARIN (2016) ENHANCEMENT OF SHORT-TERM LOAD FORECASTING BASED ON PARALLEL HYBRID WAVELET NEURAL NETWORK. Masters thesis, Universiti Teknologi PETRONAS.

SUHAIRY, MUHAMMAD SHAZWAN (2016) COMPARATIVE STUDY OF DIFFERENT COIL GEOMETRIES FOR WIRELESS POWER TRANSFER USING PROTOTYPES. [Final Year Project] (Submitted)

SULAIMAN, NUR SHAZMEEN (2016) LOAD DEFLECTION OF ENGINEERED CEMENTITIOUS COMPOSITES (ECC) OF REINFORCED SLAB. [Final Year Project]

SULEMAN, HUMBUL (2016) ENHANCED SEMI-EMPIRICAL THERMODYNAMIC MODEL FOR CARBON DIOXIDE SOLUBILITY IN AQUEOUS ALKANOLAMINES. PhD. thesis, Universiti Teknologi PETRONAS.

SUNDRAMOORTHY, JEGA DIVAN (2016) CATASTROPHIC GAS HYDRATE GROWTH UNDER SHUT-IN AND COLD START UP CONDITIONS. Masters thesis, Universiti Teknologi PETRONAS.

Saad Qasim, Muthanna (2016) EVALUATION OF ECC BASED ON UPV AND REBOUND HAMMER TESTS. [Final Year Project]

Saadon, Muhammad Syukri (2016) Wave Transmission and Reflection of the Alternatively Submerged Geotube Breakwater. [Final Year Project]

Saand, Abdul Sattar (2016) Optimization in a Dual-hop MIMO Amplify-and-forward Relay Network. Doctoral thesis, Universiti Teknologi PETRONAS.

Sabri, Muhammad Amirul Faris (2016) Steam Reforming of Glycerol over Nickel-based Catalyst. [Final Year Project] (Submitted)

Sadik, Haylay Tsegab Gebret (2016) Stratigraphy, Geochemistry, and Hydrocarbon Potential of the Upper Paleozoic Kinta Limestone, Peningsular Malaysia. Doctoral thesis, Universiti Teknologi PETRONAS.

Sadiq Azizur, Nor Iskandar (2016) FLUX AND SALT REJECTION OF RO MEMBRANES FOR UTILIZATION OF UNTAPPED WATER SOURCES. [Final Year Project] (Submitted)

Saeed Al-Haddad, Saeed Ahmed (2016) Multi-Hop Wireless Sensor Network for Continuous Oxygen Tank’s Level Detection. [Final Year Project] (Submitted)

Safdar, Sohail (2016) A framework for Ad Hoc data Migration and Password Authetication for Continuous System Availability. Doctoral thesis, Universiti Teknologi PETRONAS.

Sahardin, Abdul Malek (2016) Fabrication of Iridium Oxide Screen Printed pH Sensor for Microbial Induced Corrosion Monitoring Application. [Final Year Project] (Submitted)

Saharuddin, Muhammad Dzulhafiz (2016) THE EFFECTIVENESS OF ENTERPRISE RESOURCE PLANNING (ERP) IN OIL & GAS AND CONSTRUCTION INDUSTRY. [Final Year Project] (Submitted)

Saiful Bahri, Laila Izyana (2016) Thermodynamic Analysis of Organic Flash Cycle (OFC) for Power Generation from Low to Medium Heat Sources. [Final Year Project] (Submitted)

Saini, Sanjay (2016) Markerless Articulated Human Motion Tracking Using Hierarchical Multi-Swarm Cooperative Particle Swarm Optimization. Doctoral thesis, Universiti Teknologi PETRONAS.

Salami, Oladipupo Luqman (2016) Sustainability, Corporate Governance and Firms' Performance: A Study on Listed Companies in Malaysia. Masters thesis, Universiti Teknologi PETRONAS.

Saleh, Muhammad Ridhwan (2016) Study on Effect of Surfactants on Dispersion Characteristics of Nanofluids. [Final Year Project]

Saleh Alyafeai, Ali Abdullah (2016) Storage Tank Fire - Boilover Study of Biodiesel/Biofuel. [Final Year Project] (Submitted)

Salem Al-Gariri, Hesham Saeed (2016) Gravimetric Study of the Solubility and Dissociation of Benzoic Acid: Effect of Cosolvent and Temperature. [Final Year Project] (Submitted)

Salim, Ahmad Tirmidzi Zarfan (2016) THE STUDY OF TIME AND COST OVERRUN IN THE CONSTRUCTION AND OIL AND GAS INDUSTRY. [Final Year Project] (Submitted)

Salleh, Nor Hidahayati (2016) Corrosion Damage Analysis using Image Processing. [Final Year Project] (Submitted)

Salleh, Siti Fatimah Zahraa’ (2016) Performance of Engineered Cementitious Composite (ECC) Substituting Coconut Fiber. [Final Year Project] (Submitted)

Samsuddin, Nur Syasalbila Peat soil is one of the most soft soils ever exis (2016) Stabilization of Peat Soil by Using Effective Microorganism (EM). [Final Year Project]

Samsudin, Yon Norasyikin (2016) Droplet Impact Behaviour of Modified Biopolymer on Urea Surface: Effect of Fillers. Masters thesis, Universiti Teknologi PETRONAS.

Samsuri, Hairul Nazri (2016) Preparation and Characterization of Montmorillonite Modified Chitosan Nano-composites for Zinc Metal Removal. [Final Year Project]

Samuji, Muhammad Fakhruddin (2016) Flood Monitoring and Alert System Using Wireless Sensor Network. [Final Year Project] (Submitted)

Sareekam, Napon (2016) Simulated Offshore Structure Monitoring System Using Global Positioning System (GPS) and Accelerometer. [Final Year Project] (Submitted)

Saw , Nixon Hong Ken (2016) FPSO Mooring Line Fatigue. [Final Year Project] (Submitted)

Sayid Basri, Sayid Izwan (2016) Study on Irreversible and Coefficient Performance of Double Effect Lithium Bromide and Water Steam Absorption Chiller. [Final Year Project] (Submitted)

Sa’adan, Nurulain (2016) Development of a Solar Distilling Roofing System for Drinking Water Supply. [Final Year Project]

Sek, Edmund Chun Hei (2016) Simulation of Biomass Gasification System. [Final Year Project] (Submitted)

Selvathurai, Govindarajoo (2016) Development of Instrumented Cane for Control of Exoskeleton of Lower Limb. [Final Year Project] (Submitted)

Shabib Asl, Abdolmohsen (2016) Potential of Low Salinity Water Assisted Foam Flooding for Enhanced Oil Recovery in Sandstone Reservoir. Doctoral thesis, Universiti Teknologi PETRONAS.

Shad, Muhammad Kashif (2016) Examining Enterprise Risk Management Implementation and Firm Performance Through Economic Value Added Analysis. Masters thesis, Universiti Teknologi PETRONAS.

Shafie, Siti Nur Alwani (2016) Development of Polycarbonate-Silica Mixed Matrix Membrane for CO2/CH4 Separation. [Final Year Project]

Shafquet, Areeba (2016) Non-Invasive Non-Newtonian Wax and Gas Void Formation Using Electrical Capacitance Tomography. Doctoral thesis, Universiti Teknologi PETRONAS.

Shah, Syed Nasir (2016) De-acidification of Crude Oil Using Ionic Liquids by Neutralization Reaction and Liquid-Liquid Extraction. Doctoral thesis, Universiti Teknologi PETRONAS.

Shahabudin, Nursyamimi (2016) Design and Modelling of Portable Pico Linear Generator for Wave Energy Conversion. [Final Year Project] (Submitted)

Shahrom, Marsha Daeyana (2016) An Investigation on Heavy Metal Concentration in Tree Barks at Areas Affected by the 2015 Haze in Malaysia. [Final Year Project]

Shahrul Amar, Abdul Qayyum (2016) Investigation on the Dynamic Response of a Horizontal Axis Wind Turbine with Active Blade Pitch Control. [Final Year Project] (Submitted)

Shahzad, Basit (2016) Resource Rationalization for Large Scale Software Projects by Reducing Risks. Doctoral thesis, Universiti Teknologi PETRONAS.

Shamim, Amjad (2016) Model Development for Customer Value Co-Creation Atitude and behaviour Using Service Logic of Marketing. Doctoral thesis, Universiti Teknologi PETRONAS.

Shamsuddin, Nurul Naqila (2016) PERFORMANCE DESIGN OF BUBBLE-INCORPORATED SLAB. [Final Year Project] (Submitted)

Shamsudin, Muhammad Fasha Haiqal (2016) Computational Fluid Dynamics (CFD) Study of Gas Separation Process for High Pressure Horizontal Separator. [Final Year Project] (Submitted)

Shamsul Azman, Muhammad Ameer (2016) Path Planning Using Image Captured By Overhead Camera. [Final Year Project] (Submitted)

Sheng, Caleb Ng Zhu (2016) Assessment of the Uncoated Carbide inserts in end milling of Titanium Alloy Ti-6AI-4V. [Final Year Project] (Submitted)

Sheng, Goh Ting (2016) The Effect of Using Coolant during Bone Drilling for Surgery Application. [Final Year Project] (Submitted)

Sheng, Jason Ngu Kai (2016) Preliminary Study of Renewable Pico Hydro Electrification Schemes to Improve Current Electrification Method in Royal Belum. [Final Year Project] (Submitted)

Sheng, Ong Kai (2016) PDC Bit Hydraulic and Mud Rheological Simulation to Model Pressure Drop across Bit. [Final Year Project] (Submitted)

Shien, Goh Aik (2016) Improving the Efficiency of an Offshore Wave Energy Converter for Power Generation. [Final Year Project] (Submitted)

Shiong, Ernest Ho Zhan (2016) Testing The Efficiency And Re-evaluating the design on the Removal of Organics With the Usage of Baffled Integrated Suspended Growth System. [Final Year Project]

Shiun, Onn Wei (2016) INVESTIGATING THE OPTICAL LOSSES OF A SECOND REFLECTOR IN A BEAM DOWN POWER TOWER. [Final Year Project] (Submitted)

Shoghi, Mohammad Javad (2016) Performance of ECC Link Slab. [Final Year Project]

Shuib, Siti Suhaili (2016) Simulation Study on Combustion Characteristics of Water Tube Boiler with Different Type of Fuel. [Final Year Project] (Submitted)

Sibawaihi, Muhammad Nizam (2016) A study on Peak-Load Shaving at UTP Hoste. [Final Year Project] (Submitted)

Sihar, Nur Ain (2016) State of Charge Estimation for Lithium Polymer Batteries. [Final Year Project] (Submitted)

Silvia , Maquina Alo (2016) Comparative Estimation of Stability of Gold Nanoparticles in Aqueous Solution by Spectrophotometric Absorbance and Zeta Potential Methods. [Final Year Project]

Siyal, Ahmer Ali (2016) A Study on Synthesis and Geopolymerazation Kinetics of Fly Ash Based Geopolym. Masters thesis, Universiti Teknologi PETRONAS.

Soh, Jo Khuan (2016) Toxicology Model for Inherently Safer Design. [Final Year Project] (Submitted)

Somasundaram, Shoban Raj (2016) Study and Prediction of Ionic Liquid Viscosity Via Means of Quantitative Structure-Property Relationship. [Final Year Project]

Soon , Yung Wang (2016) Modeling and Simulation of Organic Rankine Cycle (ORC) for Power Generation. [Final Year Project]

Soriadi, Nurhidaya (2016) Development of Titanium Dioxide Nanotube Synthesized by Anodiazation for Hydrogen Sensing Application. Masters thesis, Universiti Teknologi PETRONAS.

Sowad, Rabea Saleh Rabea (2016) Caffeine as a Green Corrosion Inhibitor for Carbon Steel in Corrosive Media. [Final Year Project] (Submitted)

Srinivasan, Suppulakshmi (2016) Thermogravimetric analysis (TGA) decomposition and morphological study of Empty Fruit Bunch (EFB) torrefied under N2, O2 and CO2 atmosphere. [Final Year Project]

Su , Wen Xin (2016) Biochar Enhanced Starch (BES) Gel. [Final Year Project]

Subramaniam, Ramesh (2016) Experimental Study of Paraffin Wax Precipitation and Its Effect on Corrosion Behavior of Carbon Steel Pipeline. [Final Year Project] (Submitted)

Sukri, Ahmad Nasif (2016) DOCUMENT CONVERTER USING SMARTPHONE TO REFRESHABLE BRAILLE READER. [Final Year Project] (Submitted)

Sulaiman, Mohamad Noor Solehin (2016) General Geology and Petrophysical Properties of Interval II (200 M to 300 M) in Well CTW01: Input for the Geologic Model of Seri Iskandar. [Final Year Project]

Sulaiman, Sufi Sayyid (2016) Articulated Three Degree of Freedom (DOF) Robot Arm Manipulator Design. [Final Year Project] (Submitted)

Suleman, Humbul (2016) Enhaced Modified Kent-Eisenberg Model for Carbon Dioxide Solubility in Aqueous Alkanolamines. Doctoral thesis, Universiti Teknologi PETRONAS.

Suliman Mohamed, Yasreen Gasm Alkhig (2016) Optmization of Aggregate Gradation Combination to Improve the Asphalt Mixture Volumetric, Engineering Properties, Durability and Performance. Doctoral thesis, Universiti Teknologi PETRONAS.

Sundramoorthy, Jega Divan (2016) Catastrophic Gas Hydrate Growth under SHUT-IN and Cold START-UP Conditions. Masters thesis, Universiti Teknologi PETRONAS.

Syafrudin, Fitri Nadia (2016) Design and Improvement of Ventilation Air Cooling System for HVAC Unit Using PID Controller and VFD Techniques. [Final Year Project] (Submitted)

Syed Yusof, Syed Nazrin (2016) Analysis of energy production for local biomass resources in Perak Tengah. [Final Year Project] (Submitted)

TAN , TECK YING (2016) Lighting System Design for Commercial Buildings with Higher Energy Efficiency. [Final Year Project] (Submitted)

TSEGAB, HAYLAY GEBETSADIK (2016) STRATIGRAPHY, PALEONTOLOGY, GEOCHEMISTRY, PALEOGEOGRAPHY AND HYDROCARBON POTENTIAL OF THE UPPER PALEOZOIC KINTA LIMESTONE. PENINSULAR MALAYSIA. PhD. thesis, Universiti Teknologi PETRONAS.

Talebian, Seyedeh Hosna (2016) Evaluation of CO2-Philic Foam Surfactants as Mobility Control Agent. Doctoral thesis, Universiti Teknologi PETRONAS.

Tan, Lian See (2016) Experimental and Mathematical Modeling of CO2 from Natural Gas using MEA-Based Aqueous and Hybrid Solvent in Packed Column. Doctoral thesis, Universiti Teknologi PETRONAS.

Tan, Hua Nee (2016) Removal of Oxidized Paint using Ionic Liquid. [Final Year Project] (Submitted)

Tan, Wei Yein (2016) The Effect of Sodium Bicarbonate towards the Growth Performance and Biomass Production of Microalgae. [Final Year Project] (Submitted)

Tan, Xun (2016) Fabrication of ZIF-8/Cellulose Acetate Mixed Matrix Membrane for CO2/CH4 Separation. [Final Year Project] (Submitted)

Tan , Hon Shin (2016) Development Of Internet Of Things (IOT) For Process Control. [Final Year Project] (Submitted)

Tan , Jor Yi (2016) Comparative FE Study between MAT159 and MAT072R3 for Concrete Behaviour Modelling under Quasi-static Loading in LS-DYNA. [Final Year Project] (Submitted)

Tan , Khang Lim (2016) 3D Fish Culture and Monitoring System. [Final Year Project] (Submitted)

Tan , Yee Tong (2016) Synthesis of Low Transition Temperature Mixtures (LTTMs) From Natural Resources. [Final Year Project]

Tan Jianming , Nicholas (2016) TRACKING THE EXTENSION OF THE SEMANGGOL FORMATION USING REMOTE SENSING AND GIS TECHNIQUES. [Final Year Project] (Submitted)

Tangavaloo, Vishantini (2016) Synthesis and Characterization of Thermally Treated HKUST-1 Metal Organic Framework for Carbon Dioxide Capture. [Final Year Project]

Tasfy, Sara Faiz Hanna (2016) Development and Performance Analysis of Cu-ZnO/SBA-15 Catalysts for Hydrogenation of Carbon Dioxide to Methanol. Doctoral thesis, Universiti Teknologi PETRONAS.

Tay, Yu Cong (2016) Investigation of Activated Carbon Synthesis Process and Processes Scale-up Simulation. [Final Year Project] (Submitted)

Teh , Huey Ying (2016) Harvesting of Microalgae Biomass via Coagulation and Flocculation Process. [Final Year Project]

Teh , Weng Kean (2016) Removal of Heavy Metal Ions using Amine-Functionalized Mesoporous Adsorbent. [Final Year Project]

Ten , Joon Kit (2016) Ionic Liquid Mediated Biosynthesis of Gold Nanoparticles using Oil Palm Kernel Extract. [Final Year Project]

Terry , Teh Kim Leong (2016) Investigation of Banana Biomass for Low Cost Biofuel Production. [Final Year Project]

Thanga Raj, Joanna Ruth (2016) Characterization of Activated Carbon-Waste Tyre Char by CO2 Activation from Calcium Carbonate. [Final Year Project] (Submitted)

Thanh, Lieu Thi Ngoc (2016) Microwave-Assisted Technique for Biodiesel Production from Ceiba Pentandra (Kapok) Seed Oil. Masters thesis, Universiti Teknologi PETRONAS.

Thanh, Nguyen Tien (2016) The Growth and Chemical Composition of Freshwater Microalgae Scenedesmus Quadricauda under Various Cultivation Condition. Masters thesis, Universiti Teknologi PETRONAS.

Thanh, Trinh Hoai (2016) Study the Release of Nitrogen from Coated Urea Granule: Modelling and Simulation. Doctoral thesis, Universiti Teknologi PETRONAS.

Thennarasu, Thamarai (2016) Production of Biosurfactant From Pseudomonas Aeruginosa for Micellar Aggregates with Ionic Liquid. [Final Year Project]

Thian , Xian Khai (2016) Enhancement of Power Generation by Capacitive Mixing. [Final Year Project] (Submitted)

Thomas Martin, Diana Lia (2016) Process Improvement in Healthcare through the Application of Lean Concepts. [Final Year Project] (Submitted)

Thuy, Ngo Thi Phuong (2016) Heat Exchanger Network Synthesis and Optimization by Pinch Analysis and Differential Evolution Method. Masters thesis, Universiti Teknologi PETRONAS.

Ting, Vennesa Johnny (2016) PVTSim Prediction of Hydrate Phase Equilibrium of a Modified Natural Gas Composition in Sabah Operation Sumandak-Bravo Field (SUPGB). [Final Year Project]

Torng, Hea Yih (2016) On-Bottom Stability Study of Non-Metallic Pipeline Due To Hydrodynamic Loadings. [Final Year Project] (Submitted)

ULLAH, ZAHOOR (2016) SYNTHESIS AND CHARACTERIZATION OF IONIC LIQUIDS AS CATALYSTS FOR BIODIESEL PRODUCTION FROM WASTE COOKING OIL. PhD. thesis, Universiti Teknologi PETRONAS.

UR RAHMAH, ANISA (2016) ADVANCED OXIDATION PROCESS OF WASTEWATER CONTAINING OXYTETRACYCLINE ANTIBIOITIC CONTAMINANT USING UV/H20 2 SYSTEM. PhD. thesis, Universiti Teknologi PETRONAS.

Uka, Orji Kalu (2016) Development of an Innovative Electrocoagulation (EC) Reactor for Lead Removal from Ex-Mining Pond Water. Doctoral thesis, Universiti Teknologi PETRONAS.

Ur Rahman, Anisa (2016) Advance Oxidation Process of Wastewater Containing Oxytetracycline Antibiotic Contaminant using UV/H202 System. Doctoral thesis, Universiti Teknologi PETRONAS.

Vetsandonphong, Natthawin (2016) Arduino Based Fall Detection and Alert System. [Final Year Project] (Submitted)

Vincent, Ivan (2016) Kinetics of Prilezhaev Epoxidation of Palm Olein. [Final Year Project] (Submitted)

Voon, Min Chin (2016) Reliability Assesment on Jacket Platforms using Regression, Pushover and Reliability Methods. Masters thesis, Universiti Teknologi PETRONAS.

WAN AB RASHID, WAN NORITA (2016) EFFECT OF MILLICHANNEL REACTOR MATERIAL ON BIODIESEL PRODUCTION FROM REFINED PALM OIL. Masters thesis, Universiti Teknologi PETRONAS.

WAN MOHD NOOR, WAN NURAFIFAH HANI (2016) EXPERIMENTATION OF COMPOSITE PATCH REPAIR FOR CORRODED TUBULAR MEMBER. [Final Year Project] (Submitted)

WAN SARIS, WAN MOHD FARID (2016) FLOOD MONITORING USING AUTOMATIC PACKET REPORTING SYSTEM APRS ON VHF. [Final Year Project] (Submitted)

WOO , TZE KEONG (2016) DEVELOPMENT AND ANALYSIS OF HIGH SPEED DRILLING INDUCED DELAMINATION IN GLASS FIBER REINFORCED POLYMER. PhD. thesis, Universiti Teknologi PETRONAS.

Wan Abdul Halim, Wan Maizatul Fathirah (2016) Synthesis of Fly Ash-Based Geopolymers Using Various Alkali Activators for Dye Removal. [Final Year Project]

Wan Ameri, Wan Amirah (2016) Photocatalytic Degradation of Aqueous Ionic Liquid. [Final Year Project] (Submitted)

Wan Nadhari, Wan Noor Azleen (2016) Mechanical Properties of “Mengkuang” Fibre Reinforced Composite. [Final Year Project] (Submitted)

Wan Rahim, Wan Abdul Azeem (2016) Real Time Algorithm of Wear Detection. [Final Year Project] (Submitted)

Wee Kiat, Benjamin Chen (2016) Design and Development of Breathing Air Level Transmitter by using Arduino. [Final Year Project] (Submitted)

Wei, Wong Hoong (2016) Setting Up a Remote Accessing of a PV Plant and Its Analysis. [Final Year Project] (Submitted)

Wei Ren, Ivan Gan (2016) Numerical Simulation of Extreme Wave Loading on Deep-water SPAR Platforms using the SPH Method. [Final Year Project] (Submitted)

Wolian, Duku Paul (2016) Characterization and Properties of Powder Metallurgy Alumina-Copper Ceramic Composites. [Final Year Project] (Submitted)

Wong , Keng Mun (2016) Design of Bluetooth Compatible Temperature and Photoplethysmogram (PPG) Monitoring System. [Final Year Project] (Submitted)

Wong , Theen Meng (2016) PVdF-HFP/Chitosan Polymer-blend Quasi-solid State Electrolyte for Dye-Sensitized Solar Cells Application. [Final Year Project]

Woo, Tze Keong (2016) Develepment and Analysis of High Speed Drilling Induced Delamination in Woven Glass Epoxy Composites. Doctoral thesis, Universiti Teknologi PETRONAS.

Woon , Tian Lok (2016) A Simplified GUI for EEG Acquisition and Signal Pre-Processing. [Final Year Project] (Submitted)

YA'COB, ASYRAN SYAFIQ (2016) FRAMEWORK FOR SUSTAINABLE CONSTRUCTION WASTE MANAGEMENT PRACTICE AT SITE. Masters thesis, Universiti Teknologi PETRONAS.

YAQUB, SANA (2016) MICROWAVE-ASSISTED SYNTHESIS AND CHARACTERIZATION OF COVALENT ORGANIC POLYMER ADSORBENT FOR EFFICIENT C02 CAPTURE. Masters thesis, Universiti Teknologi PETRONAS.

YOONG, LEONG SIEW (2016) BIODIESEL PRODUCTION USING HERMETIA ILLUCENS (BLACK SOLDIER FLY)PRE-PUPAE BIOMASS THROUGH ORGANIC WASTE UPCYCLING. PhD. thesis, Universiti Teknologi PETRONAS.

YUSOF, HASAN KARAMI (2016) I-V CHARACTERISTICS OF GRAPHENE FIELD EFFECT TRANSISTOR. [Final Year Project] (Submitted)

YUSSIFF, ALIMATU-SAADIA (2016) A FRAMEWORK FOR EFFECTIVE E-COLLABORATION AND DIDACTICS ENHANCEMENT. PhD. thesis, Universiti Teknologi PETRONAS.

Yahaya, Mohd Afzal Syahin (2016) Mechanical Properties and Corrosion Resistance of Nitrided Austenitic Stainless Steel (ASS) 316L at Low Temperature. [Final Year Project] (Submitted)

Yahaya, Safuan (2016) Development of Flexible 3D Graphene/PDMS Composite Film for Strain Sensing. [Final Year Project] (Submitted)

Yakee, Nur Aishi (2016) General Geology of Semanggol Formation in Kg Rambutan, Pokok Sena area, Kedah with Emphasis on Deformation within the Chert Member. [Final Year Project]

Yang, Chong Yew (2016) Texture Surface Analysis of Hydrodynamic Journal Bearing. [Final Year Project] (Submitted)

Yang, Por Hong (2016) Monitoring Class Attendance Via Mobile Application. [Final Year Project] (Submitted)

Yaqub, Sana (2016) Microwave Assisted Synthesis and Characterization of Covalent Organic Polymer Adsorbent for Efficient CO2 Capture. Masters thesis, Universiti Teknologi PETRONAS.

Yau , Wing Tim (2016) Biodegradable Binder from Natural Resources for Biomass Densification. [Final Year Project]

Yaw, Yong Hong (2016) Single Phase Turbulent Flow Regime Characterization Using Image Processing Techniques. [Final Year Project] (Submitted)

Yegarajoo, Seridheren (2016) Design Smart In-Field Liner Hose IFL for Offshore Petroleum Pipeline Rehabilitation. [Final Year Project] (Submitted)

Yew , Jia-Ming (2016) Exploration of IEC 1131-3’s LAD and SFC Languages in PLC Programming. [Final Year Project] (Submitted)

Yew , Jia-Wei (2016) EXPERIMENTAL AND NUMERICAL INVESTIGATION OF THE TOP PLATE INFLUENCE ON THE PERFORMANCE OF SOLAR VORTEX ENGINE. [Final Year Project] (Submitted)

Yiin, Chung Loong (2016) Synthesis and Characterization of Natural Malic Acid Based Low Transition Temperature Mixtures for Biomass Delignification. Masters thesis, Universiti Teknologi PETRONAS.

Yim, See Cheng (2016) Extraction of Value-Added Products from Empty Fruit Bunch by Using Supercritical CO2 and Water as Co – Solvent. [Final Year Project] (Submitted)

Yong, Wen Pin (2016) Phase Behavior Prediction for Hydrocarbons/Carbon Dioxide/Water Systems at Low Temperatures. Masters thesis, Universiti Teknologi PETRONAS.

Yousof Kunju, Mohammad Fadzil (2016) Nitriding of A316 Stainless Steel Pipe with Improvement of Corrosion Resistance. [Final Year Project] (Submitted)

Yusni, Alif Aiman (2016) Heat Transfer Study of Helically Coiled Tube Heat Exchanger. [Final Year Project]

Yusof, Ain Munirah (2016) Optimization of Ethanol Production from Banana via Fermentation of Pre-treated Hydrolysate using Response Surface Methodology (RSM). [Final Year Project]

Yussiff, Alimatu-Saadia (2016) A Framework for E-Collaboration and Didactics Enhancement. Doctoral thesis, Universiti Teknologi PETRONAS.

ZAABA, FADIA DYNI (2016) ENGINEERING PROPERTIES OF BITUMINOUS MIXTURES CONTAINING HYDROPHILIC AND HYDROPHOBIC AGGREGATES. [Final Year Project]

ZAKARIA, MUHAMMAD HAFIZZUDDIN (2016) Comparative Investigation of Optimization Techniques for Photovoltaic Based Multilevel Inverter. [Final Year Project] (Submitted)

ZOHAIR, SYED ALI QASIM (2016) STUDY OF CARBON DIOXIDE ADSORPTION ON NANOPOROUS ACTIVATED CARBON IN FIXED-BED USING COMPUTATIONAL APPROACH. Masters thesis, Universiti Teknologi PETRONAS.

Zafar, Muhammad Adeel (2016) Material Flow Behavior and Mechanical Properties of Friction Stir Welded 16MM-Thick Nylon-6 Plates. Masters thesis, Universiti Teknologi PETRONAS.

Zafian, Syaza Syahira (2016) Simulation Of Stiffness Control In Automotive Suspension Using Matlab-Simulink. [Final Year Project] (Submitted)

Zailan, Fatin Syamimi (2016) IMPLEMENTATION OF HOME AUTOMATION USING WIRELESS COMMUNICATION. [Final Year Project] (Submitted)

Zainal Ariffin, Azree Farees (2016) The Effect Of Compaction Temperatures On The Marshall Properties Of Asphaltic Concrete. [Final Year Project]

Zainalabidin, Muhammad Amirul Luthfi (2016) Effect of Agitated Turbulence on Demulsification of Crude Oil Emulsions in Production Separator. [Final Year Project] (Submitted)

Zainol Arrifin, Khairul Akram (2016) Versatile Techniques, Algorithms and tools for Dynamics Memory Analysis to Support the Traditional Computer Forensic Approach. Doctoral thesis, Universiti Teknologi PETRONAS.

Zainudin, Qistina (2016) A Study on Structural Patterns of Trap Systems in K Field, Taranaki Basin, New Zealand. [Final Year Project]

Zakaria, Abdul Aziz (2016) Automatic License Plate Recognition Software for Malaysian Vehicle License Plates. [Final Year Project] (Submitted)

Zakaria, Ahmad Syafiq (2016) DESIGN AND PERFORMANCE ASSESSMENT OF A PHOTO-FENTON REACTOR WITH IMMOBILIZATION OF FE ON NAFION MEMBRANE; FOR REMOVAL OF PAHs FROM THE SUPPLY WATER. [Final Year Project] (Submitted)

Zakaria, Mohd Zakwan (2016) Enhancement Of Strength And Fire Resistance Properties Of Intumescent Coatings By Basalt Fibre. [Final Year Project] (Submitted)

Zakaria, Siti Zubaidah (2016) MULTI-HOP WIRELESS SENSOR NETWORKS FOR REMOTE MONITORING OF SOIL MOISTURE. [Final Year Project] (Submitted)

Zakaria, Zuhaiza (2016) Assessment of GPS Accuracy in Detecting Simulated Reservoir Subsidence. [Final Year Project]

Zawawi, Muhammad Helmi Zin (2016) Thermodynamic Modelling of Organic Rankine Cycle (ORC) for Waste Heat Recovery of a Gas Turbine Engine. [Final Year Project] (Submitted)

Zemri, Nurul Syuhadah (2016) Development of an Automated Three-Phase Distribution Box System. [Final Year Project] (Submitted)

Zohair, Syed Ali Qasim (2016) Study of Carbon Dioxide Adsorption on Nanoporous Activated Carbon in Fixed-bed using Computational Approach. Masters thesis, Universiti Teknologi PETRONAS.

Zoolkepli, Izzaty Hannis (2016) The Investigation on Geomechanical Properties of Shale from Semanggol Formation, Bukit Merah as Analogue to Cap Rock Integrity for Hydrocarbon Sealing. [Final Year Project]

Zukhri, Syifaa (2016) Boron Removal from Model Waste Water Using Adsorption Process: A Case Study. [Final Year Project] (Submitted)

Zul Azri, Azril Danial (2016) Simulation Study Effect of Fine Particle on Choke Valve by Using Computational Fluid Dynamic (CFD). [Final Year Project] (Submitted)

Zul Kamal, Nurul Atiqah (2016) The Characteristics of Tsunami Deposit based on Mineralogy Studies. [Final Year Project]

Zulkafli, Muhammad Harith (2016) Investigation of Nanofluids Selection for Solar Thermal Collectors. [Final Year Project] (Submitted)

Zulkafly, Muhammad Hafiz (2016) Determination Spatial Location of Regional Landslide Using GIS. [Final Year Project]

Zulkarnain, Ahmad Fahim (2016) Optimize Build Orientation for 3D Printing to Minimize Build Time and Support Structure. [Final Year Project] (Submitted)

Zulkarnain , Ahmad Farhan (2016) Petrophysical Properties and Reservoir Potential of Setul Formation, Langkawi Island. [Final Year Project] (Submitted)

Zulkifli, Fadhlullah Hassan (2016) Multi-Robot Platooning Using Cameras. [Final Year Project] (Submitted)

Zulkifli, Muhammad Ridhwan (2016) Geology, Petrology and Fracture Survey Of Granite In Lumut Area, Perak. [Final Year Project]

Zulkifli, Muhammad Zulfadli (2016) Dropped Object Protection Modelling for Subsea Equipment. [Final Year Project] (Submitted)

Zulkifli, Nor Adiba (2016) Technical Losses Evaluation on UTP Electrical Network. [Final Year Project] (Submitted)

Zulkipli, Muhammad Shamil (2016) Performance Study on Hot Air Recovery for Solar Thermoelectric Cooler System. [Final Year Project]

Zulkofli, Muhamad Hazim (2016) Exploration of Multilevel Inverter Topology Using Single and Double Source Unit with Solar System. [Final Year Project] (Submitted)

Zulkurnain, Zulmukhris Hazazi (2016) Smart Motor Driver System for Speed and Position Control of a DC Geared Motor. [Final Year Project] (Submitted)

a/l Asokan, Arravinthan (2016) Mechanical Properties and Performance Evaluation of Polypropylene (PP)/Lalang Grass Composite. [Final Year Project] (Submitted)

a/l Etiapan, Sivaraj (2016) A Comparison Study of Kinta Valley Limestone and Gomantong Limestone: Mineralogy and Economic Potentiality. [Final Year Project] (Submitted)

a/l Gurdial Singh, Dalvinder Singh (2016) Performance Analysis of Ice Crystals Collection Mechanism in a Freezing Desalination Process. [Final Year Project] (Submitted)

a/l Jeyaprakasam, Gajendran (2016) Study of Free Falling Particle in Viscous Fluid. [Final Year Project] (Submitted)

a/l Malaichelvan, Arevind Chelvan (2016) Influence of alkali activator concentration on synthesis of high calcium fly ash geopolymer. [Final Year Project]

a/l Muniandy, Devendraa (2016) Thermophilic Aerobic Digestion of Food Waste to Pelletized Fertilizer. [Final Year Project]

a/l N.Rajandran, Vinod (2016) New innovative methodology concept for Product Development Process. [Final Year Project] (Submitted)

a/l Paramesura Rao, Satish Rao (2016) Study on Economic Evaluation of Different Techniques for CO2 Separation from Natural Gas. [Final Year Project]

a/l Sukhdev Singh, Sukhveender Singh (2016) The Potential Tsunami Impact to Coastal Vegetation and Geological Landscape in Segari, Lumut. [Final Year Project] (Submitted)

a/p Gurbachan Singh, Veerinder Kaur (2016) Coir Rolls as Temporary Measure For Wave Attenuation. [Final Year Project] (Submitted)

a/p Muthusamy, Mugilleswari (2016) Android Application to Detect and Alert Tachycardia and Bradycardia using Pulse Rate Sensor. [Final Year Project] (Submitted)

bin Ahmad Shahran, Muhammad Saufi (2016) Structural Geology Of Semanggol Formation Emphasis on Gunung Semanggol, Perak Area. [Final Year Project] (Submitted)

bin Ash’ari, Norhalimi (2016) Petrology of Northeastern Part of Gunung Jerai. [Final Year Project] (Submitted)

bin Md. Nor, Mohamad Hanif (2016) Coal Petrology and Geochemistry of Upper Coal Zones and Lower Coal Zones of Nyalau Formation from Merit-Pila Coalfield. [Final Year Project] (Submitted)

bin Md. Nor , Mohamad Hanif (2016) Coal Petrology and Geochemistry of Upper Coal Zones and Lower Coal Zones of Nyalau Formation from Merit-Pila Coalfield. [Final Year Project] (Submitted)

bin Rafiuddin, Mohammad Ashraf (2016) The Potential Tsunami Impact to Coastal Vegetation and Geological Landscape at Teluk Senangin, Lumut, Perak. [Final Year Project] (Submitted)

binti Abu Bakar, Nur Aimi Asyiqin (2016) General Geology of Kijal area in Terengganu with emphasize on Characterization of Carbonaceous Slate. [Final Year Project] (Submitted)

binti Azhar, Nur Afifah (2016) Semanggol Formation: Geological and Sedimentology Study of Kg. Jabi Area, Pokok Sena, Kedah. [Final Year Project] (Submitted)

binti Jamaludin, Nur Farhana (2016) Exploration and Detection of sinkhole in Lahat, Perak with Emphasis on Electrical Resistivity. [Final Year Project] (Submitted)

bt Suharto, Nur Shafiqah Athirah (2016) General Geology of Bukit Tinggi Area, Pahang with emphasis on Bukit Tinggi Fault Zone. [Final Year Project] (Submitted)

khamis, Abubakr Sirageldin (2016) Malicious Web Page Detection Framework Based on URL and Content Features. Doctoral thesis, Universiti Teknologi PETRONAS.

This list was generated on Fri Apr 19 18:03:27 2024 +08.