Browse by Type

Wan Mohamed Rizal, Wan Nur Aleez (2017) Treatment of Jaundice using Blue LED Strips as a Light Source. [Final Year Project]

AHMAD SHUKRI, MEGAT AHMAD FAIZ (2017) WIRELESS TIME SYNCHRONIZATION BETWEEN IOT DEVICES. [Final Year Project]

Roslee, Muhamad Faris Izzuddin (2017) Development of Power Management Circuit for Hybrid Energy Harvester. [Final Year Project]

Ahmad, Abdul Muhaimin (2017) Underwater Glider Maneuvering Mechanism. [Final Year Project]

Maslan, Nur Amal Aqilah (2017) The Implementation of Electronic Speed Control on Electric Scooter for Optimum Performance. [Final Year Project]

ADENAN, NUR AQILAH (2017) MONITORING AND CONTROLLING SYSTEM OF AN AUTOMATED THREE-PHASE DISTRIBUTION BOX SYSTEM. [Final Year Project]

SYED MOHD NAIM, SYED AHMAD NABIL (2017) ENERGY HARVESTER SYSTEM BY USING ANAEROBIC DIGESTION AND FOOD WASTE AS FUEL. [Final Year Project]

MATHEW, NAILO JACKSON (2017) IMPROVEMENT OF POWER QUALITY METRIC EVALUATION. [Final Year Project]

RONG, LOO KAI (2017) Aerodynamic Characteristics of Gas Engine Compressor Under Different Surface Roughness Conditions. [Final Year Project]

VIN, LYE KEL (2017) PNEUMATIC SYSTEM OPERATED BY COMPRESSED AIR (C.A.E): AIR-POWERED VEHICLE. [Final Year Project]

ZULAZNI, MUHAMMAD ASYRAF (2017) PART LOAD PERFORMANCE ANALYSIS OF ELECTRIC CHILLER AND STEAM ABSORPTION CHILLER AT DISTRICT COOLING PLANT. [Final Year Project]

Xin Wei, Yeap (2017) Gas Turbine Health Prognostics Using Artificial Neural Network. [Final Year Project] (Submitted)

MUHAMMAD ALI, MOHAMED AMIN (2017) DEGRADATION OF AQUEOUS 1-BUTYL-3-METHYLIMIDAZOLIUM CHLORIDE USING FENTON’S OXIDATION: THE OPTIMIZATION STUDY. [Final Year Project]

A

Ahmad Faudzi, Muhammad Izwan Asraf (2017) MULTI INPUTS MULTI OUTPUTS (MIMO) DC DC CONVERTER FOR DC MICRO GRID APPLICATIONS. [Final Year Project]

Abdullah, Nurul Naiemah (2017) HEAVY METAL IONS DETECTION USING GRAPHENE FET DNA SENSOR. [Final Year Project]

ABDUL RASHID, DANIAL HAFIZ (2017) CHARACTERIZATION OF A CMOS-MEMS DEVICE FOR THE DETECTION OF WEAK VIBRATION. [Final Year Project]

ABD RASHID, NOOR AISYAH (2017) ROBOT NAVIGATION USING CAMERA BY IDENTIFYING SIGNAGES. [Final Year Project]

ABDUL RAZAK, NUSRAH (2017) IMPLEMENTATION OF BEHAVIOUR BASED NAVIGATION IN A PHYSICALLY CONFINED SITE. [Final Year Project]

ABDUL RAZAK, FARAH NABILLAH (2017) INVESTIGATION OF IMPROVED CHROMAMETRY MEASUREMENT ALGORITHM FOR PALM OIL FRESHNESS & SAFETY IDENTIFICATION USING MOBILE PHONE. [Final Year Project]

ANUAR, NUR ATIKAH (2017) DESIGNING THE CIRCULAR MAGNETIC STRUCTURE FOR IMPLEMENTATION IN THE ELECTRICAL VEHICLE. [Final Year Project]

AHMAD PUAT, NADHIRA NATASYA (2017) DEVELOPMENT OF SOLAR ENERGY HARVESTER FOR INTERNET OF THINGS. [Final Year Project]

ABDUL MANAF, MUHAMAD AMIR FARID (2017) DESIGNING A SELF-CONTROL ROOM TEMPERATURE AND HUMIDITY USING FUZZY LOGIC. [Final Year Project]

Abdul Wahid, Mohamad Zuhaili (2017) Comparative and Analysis of Controllers in Three-Phase Three-Level Neutral Point Clamped PWM Rectifier for Power Quality Assessment. [Final Year Project]

Afandi, Abdul Muiz (2017) Automated Vehicle Counting And Classification System. [Final Year Project]

AZMAN, DANIAL HANIF (2017) DEVELOPMENT OF FLOOD MONITORING SYSTEM. [Final Year Project]

ABDEL MOTAGALY, ZIAD (2017) DESIGN OF A MILLIMETER WAVE E-PLANE WAVEGUIDE BANDPASS FILTER FOR FUTURE 5G MOBILE NETWORKS. [Final Year Project]

Abdullah, Siti Nur Ashikin (2017) WIRELESS DATA TRANSMISSION AND ACTUATION OF FLOW CONTROL PROCESS. [Final Year Project]

ABDUL JALIL, MUHAMMAD ADLAN (2017) DATA FITTING FOR SOLAR RADIATION MODELING. [Final Year Project]

Abdul Rashid, Nurun Najihah (2017) A Proposal of Mercury Removal Technique for Oil and Gas Industrial Wastewater. [Final Year Project] (Submitted)

Amran, Noranaty Athirah (2017) ENHANCEMENT OF WATER PRODUCTION USING SOLAR STILLS COUPLED WITH LOW POWER PV/DC HEATER. [Final Year Project] (Submitted)

Alqerbi, Adel Abdulwahid (2017) Junction Analysis Using Sidra Intersection. [Final Year Project] (Submitted)

Abdul Khalif, Mohd Zamri (2017) How Individuals’ Activity-Travel Behaviour Shape Human Activity Space. [Final Year Project] (Submitted)

Amri, Aufa (2017) Enhancement of Water Production Using Solar Still Coupled with High Power PV/AC Heater. [Final Year Project] (Submitted)

Azhar, Muhammad Nur Iman (2017) EFFECT OF LOCAL JOINT FLEXIBILITY (LJF) IN STRUCTURAL ASSESSMENT OF AGEING JACKET OFFSHORE PLATFORM. [Final Year Project] (Submitted)

Abdul Ghafar, Nor Haslinayati (2017) Theoretical Study of Safe Braking Line at Signalized Intersection. [Final Year Project] (Submitted)

AZAHARI, FATIN AZUREEN (2017) FRAMEWORK ON CRITICAL SUCCESS FACTORS AFFECTING ON MAINTENANCE MANANGEMENT AND PRACTICE IN PUBLIC PROJECT. [Final Year Project] (Submitted)

Ahmad Rashidi, Zaty Amirah (2017) Preliminary Study of Stabilization of Peat Soil Using Effective Microorganism. [Final Year Project] (Submitted)

ABDUL LATIF, MOHD FATEHAH (2017) A STUDY ON THE EFFECT OF MARINE GROWTH ON FIXED JACKET PLATFORM DAMAGED BY CORROSION. [Final Year Project] (Submitted)

Abdul Rahman, Mohamad Hakim (2017) Identification Of Potential Energy Harvesting Technique From KTM Railway Track. [Final Year Project] (Submitted)

Abdul Rahim, Mohamed Hyrul Amry (2017) he Use of Red Algae Wastes as Bio Adsorbent for Heavy Metals Removal. [Final Year Project] (Submitted)

Abd Aziz, Nur Zahirah (2017) Effectiveness of Safety Control and Implementation in Construction Project. [Final Year Project] (Submitted)

ABD JALIL, MUHAMMAD NURTASLIM (2017) NUMERICAL STUDIES ON THE GAP RESONANCE OF FPSO AND SHUTTLE TANK SIDE BY SIDE DUE TO OCEAN EXCITING WAVES. [Final Year Project] (Submitted)

Al-Sheikh Ali, Anas Khaled Ali (2017) Probabilistic Distribution of Ultimate Pile Capacity Based on Pile Load Test Data. [Final Year Project] (Submitted)

Aziz, Nur Atiqrah (2017) INVESTIGATION ON WETTING PATTERN OF NORMAL AND SURGE IRRIGATION FOR VARIATION OF SOIL TYPES. [Final Year Project] (Submitted)

ABDUL RASHID, NUR AMIRA (2017) LANDSLIDE ASSESSMENT ON UTP CUT SLOPE. [Final Year Project] (Submitted)

AHMAD, MUHAMAD SHUHAIRI (2017) DESIGN AND IMPLEMENTATION OF SEPIC CONVERTER FOR NANOSATELLITE APPLICATIONS. [Final Year Project]

Ahmad Shukri, Muhammad Zulmarzuqi (2017) Numerical Studies on Tension-leg Platform Wind Turbine In Malaysia. [Final Year Project] (Submitted)

Azahar, Ahmad Zahin (2017) The Study of Wave Run-up by Varying Roughness Pattern. [Final Year Project] (Submitted)

AHMAD ZAINUDIN, MUHAMMAD FAIZ (2017) FEASIBILITY STUDY ON SUPERSONIC CENTRIFUGE FOR FREE WATER REMOVAL FROM BIOGAS. [Final Year Project] (Submitted)

Ahamad Azahari, Ahmad Syahmi (2017) Grey Relational Analysis For Piping Systems Subject To Corrosion Under Insulation. [Final Year Project] (Submitted)

Adzmi, Muhammad Azrin (2017) Simulation on Emotion Recognition for Autism Therapy. [Final Year Project] (Submitted)

A. Ghani, Aslam (2017) Design and Development of Pipeline Inspection System. [Final Year Project] (Submitted)

AWAN MAPER, ATER ISAAC (2017) STRESS ANALYSIS OF SPUR GEARS, WITH TIP RELIEF. [Final Year Project]

Abdelsalam Elhassan, Ali Ogail (2017) Performance validation of a Remotely Monitored Off-Grid PV Plant in UTP. [Final Year Project]

ADHI, VINCENT ADRIAN (2017) MODELLING AND OPTIMIZATION OF HYBRID POWER SYSTEMS FOR RURAL AREAS. [Final Year Project]

ARUMUGAM, UVANISWARAN (2017) INTERNAL COMBUSTION ENGINE INTAKE MANIFOLD AIR FLOW OPTIMIZATION. [Final Year Project]

Awalludin, Azlan (2017) Electrodeposition and Characterization of Ni-Mo-ZrO2 Composite Coatings. [Final Year Project]

AHMAD KAMAL, NURUL ATIQAH (2017) CORROSION IMPACT AND COMPATIBILITY STUDY OF METALLIC MATERIALS WITH BIODIESEL FUEL. [Final Year Project]

ABDULLAH MAHMOUD Y, ALSOMALI (2017) THE EFFECTS OF THERMOPLASTIC OLEFIN (TPO) ON MECHANICAL PROPERTIES OF RECYCLED POLYPROPYLENE (r-PP). [Final Year Project]

AHMAD NIZAM, NUR FARAH IZZATI (2017) INFLUENCE OF SUBSTRATE ENERGY ON THE ADHESION COMPATIBILITY OF EPOXY ADHESIVE USING MOLECULAR SIMULATION TOOL. [Final Year Project]

Abdullah Mahmoud Y, Alsomali (2017) THE EFFECTS OF THERMOPLASTIC OLEFIN (TPO) ON MECHANICAL PROPERTIES OF RECYCLED POLYPROPYLENE (r-PP). [Final Year Project]

AHMED AHMED AL-AWADHI, KHOBAIB (2017) VALIDATION OF PROCESS SAFETY CULTURE MODEL USING DELPHI METHOD. [Final Year Project]

ALIAS, NADHIRAH (2017) PREPARATION AND CHARACTERIZATION OF CAESIUM BASED CLAY CATALYST FOR GLYCEROL CONVERSION. [Final Year Project]

ABDUL SAMAD, NUR IZZATI (2017) SOLAR-PV BASED SINGLE INPUT MULTIPLE OUTPUT (SIMO) DC-DC CONVERTER FOR ELECTRIC VEHICLE APPLICATION. [Final Year Project] (Submitted)

Ahmad, Solihin Khaiessa (2017) Thermal Image Analysis of Holistic based Treatment. [Final Year Project] (Submitted)

ABD GHANI, ABDUL FATAH FIKRI (2017) INTEGRATED ULTRASONIC-CAPACITANCE LIQUID LEVEL SENSOR. [Final Year Project] (Submitted)

Adjayeng, Gerardo Ondo Micha (2017) VARIABLE FREQUENCY DRIVE (VFD) DESIGN IMPROVEMENT TO SURVIVE DURING VOLTAGE DIP. [Final Year Project] (Submitted)

Abd Razak, Najihah (2017) Keyboard-less system using EEG Signal. [Final Year Project] (Submitted)

A. RAMLAN, NADIA FATIHA (2017) OPTOELECTRONIC DEVICE FOR STRESS DETECTION. [Final Year Project] (Submitted)

Awg Ajis, Dayang Dyanna (2017) Bilirubin Level Detection Using Different UV Light. [Final Year Project] (Submitted)

AHMAD, MOHD SHAFARIZ AKMAL (2017) DEVELOPMENT OF FIRE ENGINE NAVIGATION SYSTEM AND FIRE HYDRANT WATER FLOW RATE. [Final Year Project] (Submitted)

ABDUL MANAB, MUHAMMAD HARIZ (2017) AMBIENT LIGHT MONITORING SYSTEM USING INTERNET OF THINGS (IoT). [Final Year Project] (Submitted)

Azhar, Mohammad Azzam (2017) Electric Scooter with Efficient Power Monitoring and Extended Distance. [Final Year Project] (Submitted)

Aminudin, Nurul Bazlaa’ (2017) Development of Fuzzy Multi-Criteria Analysis Method for Tender Cleaning Service Selection. [Final Year Project] (Submitted)

AMIN ALI, AHMED ABDELAZIZ (2017) Characterization of a MEMS-Based Humidity Sensor. [Final Year Project] (Submitted)

Ab Halim, Mohammad Farhan (2017) Corrosion Under Insulation Testing and Simulation of Insulated Piping. [Final Year Project]

ABDELRAHMAN ALI GASIM, ALRASHEED (2017) Joining of SiAlON to Nitrided Duplex Stainless Steel at Elevated Temperature. [Final Year Project]

ARIFF SHAH, ABDUL (2017) FINITE ELEMENT ANALYSIS OF SOLID-STATE THERMOELECTRIC GENERATOR WITH VARYING CONFIGURATIONS. [Final Year Project]

B

BADRUL HAIRI, NIZARUL HAZIM (2017) HEART BEAT SENSING SYSTEM FOR HEART ATTACK DETECTION. [Final Year Project]

Boo, Yee Ying (2017) Computational Study of Tsunami Inundation by Using LABSWETM – Sisko Model. [Final Year Project] (Submitted)

Badrol Hisham, Muhammad Nadzmi Faez (2017) A Techno-Economic Investigation of a Residential Solar Photovoltaic System at Bandar Universiti, Perak, Malaysia. [Final Year Project] (Submitted)

Babu, Dhanesh Kumar (2017) Development of Amine-Functionalized MCM-41/Cellulose Acetate Mixed Matrix Membrane for CO2 Separation from CH4. [Final Year Project]

BONG, DAVID CHUNG HUA (2017) REAL-TIME PLATOONING OF MOBILE ROBOTS: STUDY OF TRAJECTORY WITH OBSTACLE AVOIDANCE. [Final Year Project] (Submitted)

C

Chan, Yee Ling (2017) Functional Connectivity Assessment on Aging Brain using Functional Near Infrared Spectroscopy (fNIRS). [Final Year Project]

Che Hassan, Nur Muhammad Hadri (2017) Settlement Analysis due to Micro-Tunnelling Works. [Final Year Project] (Submitted)

Chandrasegaran, Shanker (2017) Developing a SDSS for multi-criteria flood susceptibility mapping in Malaysia. [Final Year Project] (Submitted)

Che Aslan, Nasrul Haziq (2017) MECHANICAL PROPERTIES AND PERFORMANCE EVALUATION OF RECYCLED POLYPROPYLENE AND TREATED MENGKUANG LEAVES COMPOSITES. [Final Year Project]

CHENG WYEI YEE, SHARON (2017) THE EFFECT OF DRILLING DIAMETER AND CUTTING SPEED ON THE MACHINABILITY DURING DRILLING MAGNESIUM ALLOYS. [Final Year Project]

CUI TING, CHUE (2017) HYDRODYNAMIC STUDIES ON LIQUID-LIQUID TWO PHASE FLOW SEPARATION IN MICROCHANNEL BY CFD MODELLING. [Final Year Project]

CHEE MUN, MAK (2017) STUDY ON THE EFFECT OF PRESSURE AND TEMPERATURE ON HYDRODEOXYGENATION OF GUAIACOL USING BATCH REACTOR WITH NI/AL-MCM-41 CATALYST. [Final Year Project]

CHANDRAN, RATANASHANGKARI (2017) AGRICULTURAL WASTES BASED FIBROUS POZZOLANIC CONCRETE AS A GREEN CONSTRUCTION MATERIAL. [Final Year Project]

Chong, Yi Chuan (2017) IOT Application in DUT High Frequency Measurement. [Final Year Project] (Submitted)

CHAN, GENEVIEVE CHEAU YANN (2017) DEEP LEARNING FOR IMAGE PROCESSING, APPLICATION TO DIABETIC MACULAR EDEMA (DME) DETECTION ON OPTICAL COHERENCE TOMOGRAPHY (OCT) IMAGES. [Final Year Project] (Submitted)

Chua, Yean Fang (2017) Development of Flood Monitoring System. [Final Year Project] (Submitted)

CHEN, ZHENG HORNG (2017) DESIGN AND ASSESSMENT OF BRAIN TRAINING GAME. [Final Year Project] (Submitted)

Che Ku Amran, Che Ku Hariz (2017) Design and MATLAB Simulation of Pitch Motion System Controller for Underwater Vehicle. [Final Year Project]

CHANG, YEE JIAN (2017) STUDY ON THE EFFECTIVENESS OF INORGANIC CORROSION INHIBITOR FOR MILD STEEL IN COOLING WATER SYSTEM. [Final Year Project]

D

da Costa Gaspar, Hugo Aureliano (2017) Investigation of the Effect of Different Types of Steel Fiber on High Performance Fiber Reinforced Cementitious Composite (HPFRCC) Beams with Different Aspect (a/d) Ratios. [Final Year Project] (Submitted)

Darasahudin, Dalila Sarah (2017) Recycle Concrete Waste from Laboratory as Aggregates for Concrete. [Final Year Project] (Submitted)

DJALILOV, FARRUH (2017) MECHANICAL PROPERTIES OF RECYCLED HIGH DENSITY POLYETHYLENE REINFORCED WITH KENAF FIBERS. [Final Year Project] (Submitted)

Daran, Vivegan Murali (2017) Analysis Of Multiple Hole Structures Of Basalt Epoxy Laminates. [Final Year Project]

DEGEN, TEE (2017) INVESTIGATION OF WATER-IN-BIODIESEL EMULSION CHARACTERISTICS PRODUCED BY ULTRASONIC HOMOGENIZER. [Final Year Project]

DAMIRI, ANASUHA BALQIS (2017) THE STUDY OF FACTORS AFFECTING TWO PHASE FLOW SEPARATION IN MICRO-REACTOR. [Final Year Project]

DECK YIK, DING (2017) EFFECT OF IONIC LIQUID CONCENTRATION ON PRETREATMENT OF OIL PALM BIOMASS FOR FABRICATION OF COMPOSITE BOARD. [Final Year Project]

DORAISELVAN, KIRENRAJ (2017) DEVELOPMENT AND PERFORMANCE EVALUATION OF POLYMERIC MEMBRANE FOR CARBON DIOXIDE SEPARATION UNDER WET FEED CONDITIONS. [Final Year Project]

DADEBAYEV, DIDAR (2017) INVESTIGATION OF THE INHIBITION EFFECT OF IONIC LIQUIDS ON METHANE HYDRATES. [Final Year Project]

E

EVANS SEBIT, PARIDE (2017) CONTROL OF AZEOTROPIC DISTILLATION COLUMN. [Final Year Project]

ELISEUS, ARTHUR (2017) TILTED MEMBRANE PANEL: A NEW MODULE CONCEPT TO MAXIMIZE THE IMPACT OF AIR BUBBLES FOR MEMBRANE FOULING CONTROL IN MICROALGAE HARVESTING. [Final Year Project]

F

FEI LING, HAN (2017) AN INTERNET OF THINGS ENVIRONMENTAL MONITORING IN CAMPUS. [Final Year Project]

Fakhruddin, Faten Syazwani (2017) DEVELOPMENT OF IOT-BASED HEALTHCARE SYSTEM. [Final Year Project]

Fauzi, Mohamad Nasaruddin (2017) Thermal Analysis of VLSI System: A Computational Fluid Dynamics Approach. [Final Year Project]

Fahrulrazi, Amir Fitri (2017) ARM Based Motor Driver for Robotic Application. [Final Year Project]

Farelle, Charles Joseph (2017) Investigation of The Ambient Nitrogen Oxides (NOx) Trends at Tronoh, Perak. [Final Year Project] (Submitted)

FADLALLA, MOHAMED AHMED ELTAYEB (2017) Optimization of a CMOS-MEMS Resonator for Applications of Relative Humidity Measurement. [Final Year Project] (Submitted)

G

GABAN, IVAN (2017) ANSYS Modelling and Vibration Stability Analysis of Pipelines Conveying Fluid. [Final Year Project]

GHANI, FATIN SYAMIMI (2017) THE EFFECT OF CUTTING SPEED AND FEED RATE ON THE DRILLED HOLES QUALITY OF TITANIUM ALLOYS, TI-6AL-4V. [Final Year Project]

GUAN THENG, SOONG (2017) MOLECULAR DYNAMICS SIMULATION OF PVDF MEMBRANE IN IONIC LIQUID AND MODEL OIL. [Final Year Project]

Ghovind, Dina (2017) Data Processing of an Energy Management System Using the Google Cloud Platform. [Final Year Project] (Submitted)

Gan, Heng Yi (2017) Software Tool for Brain Connectivity Analysis. [Final Year Project] (Submitted)

H

Hanmuhammet , Gayypov (2017) PARAMETRIC STUDY ON THE GEOMETRIC PARAMETERS OF CORRUGATED BLAST WALL. [Final Year Project] (Submitted)

Hamidun, Mohd Arif Ikhwan (2017) DEVELOPMENT OF CLOSED LOOP CONTROL OF CASCADED H-BRIDGE MULTILEVEL INVERTER FOR PHOTOVOLTAIC APPLICATION. [Final Year Project]

HADRI, MASHAZRINA (2017) ANALYSIS OF MOTION DETECTION IN VIDEO SECURITY SURVEILLANCE SYSTEM. [Final Year Project]

Ho, Agnes Yin Yee (2017) Extraction and Application of Fruit Waste (Citrus Maxima) in Microalgae Harvesting. [Final Year Project] (Submitted)

Harun, Mohamad Bakhit Aiman (2017) Multi Body Approach to Dynamical System: The Case of Wind Turbine. [Final Year Project] (Submitted)

Hui Cin, Chong (2017) Additive Manufacturing for Structures Generated by Topology Optimization. [Final Year Project]

HARUN, MUHAMMAD ERMAN (2017) INFLUENCE OF NITRIDING PROCESS VARIABLES ON THE TENSILE STRENGTH OF AUSTENITIC STAINLESS STEEL 316L. [Final Year Project]

HZIEN HUNG, SIEW (2017) STUDY OF PROGRESSIVE FREEZE CONCENTRATION IN BIODIESEL WASTEWATER VOLUME REDUCTION. [Final Year Project]

Ho, Sharon Siew Wan (2017) Assessment of Upper Extremities Using an Interactive Robotics Rehabilitation Training System. [Final Year Project] (Submitted)

I

Ismail, Muhammad Hamizan (2017) How Activity-Travel Behaviour Influenced Individuals’ Rate of Accident. [Final Year Project] (Submitted)

IBRAHIM, NURUL AIDA RADHIAH (2017) CLASSIFICATION OF EMPHYSEMA USING CONVOLUTIONAL NEURAL NETWORK. [Final Year Project]

Ismail, Muhammad Zulhafiz (2017) Assessment of Non-Methane Hydrocarbon Trends in Ambient Air of Tronoh, Perak, Malaysia. [Final Year Project] (Submitted)

Ismail, Muhammad Izzuddin (2017) Forces on fixed offshore structures: effects of nonlinear irregular wave kinematics. [Final Year Project] (Submitted)

IBRAHIM, NURUL ASYIQIN (2017) DEVELOPMENT OF PVDF/ZIF-8 COMPOSITE MEMBRANE FOR DOMESTIC WASTEWATER TREATMENT. [Final Year Project]

Iampita, Ivan Manuel (2017) Smith Predictor-based Control of Systems with Time Delay. [Final Year Project] (Submitted)

J

Jofri, Mohd Kholil (2017) Automatic License Plate Recognition System for Recognizing Overlapping Characters in Malaysian License Plates. [Final Year Project]

Jin Chien, Lim (2017) APPLICATION OF WIRELESSHART ADAPTOR FOR CONTROL VALVE ACTUATION. [Final Year Project]

Joseph, Ann Joann (2017) DEVELOPMENT OF AN INTELLIGENT CAT SAND BASIN. [Final Year Project]

JAJULI, MUHAMMAD SYAHMI (2017) PHYSICAL AND CORROSION ANALYSIS OF DISSIMILAR METAL WELD OF CARBON STEEL AND AUSTENITIC CARBON STEEL IN MULTIPASS WELD DEPOSIT. [Final Year Project] (Submitted)

Jie, Yu Jun (2017) Systematic Procedure of Acid Leaching for Removal of Impurities from Used Abrasive Blasting Media for Powder Metallurgy Application. [Final Year Project]

JAGINDAR SINGH, TESHVINDER KAUR MANN (2017) COMPARATIVE STUDIES OF ROOT CAUSE ANALYSIS (RCA) TECHNIQUES IN RCA SOFTWARE IN OIL AND GAS INDUSTRY. [Final Year Project]

JUN YONG, YAP (2017) OPTIMIZATION OF OIL PALM EMPTY FRUIT BUNCH GRAFTED POLYVINYL ALCOHOL HYDROGEL BY TAGUCHI METHOD AND INVESTIGATION OF ITS METAL IONS ADSORPTION. [Final Year Project]

JAYALLAN, YUWARAAJ (2017) REMOVAL OF FLUORIDE FROM WATER USING EGGSHELLS. [Final Year Project]

JIE QIAN, LOH (2017) DISRUPTING AND HARVESTING OF MICROALGAE CELLS USING OZONE BUBBLES. [Final Year Project]

K

KHAIRUDDIN, AHMAD SYAUQI (2017) Human Vital-Sign Measurement Using Non-Invasive and Non-Destructive Optical Detection Technique. [Final Year Project]

Kiew, Long Jun (2017) DESIGN A TESTING DEVICE FOR BCD MODULE OF ELECTRIC DRIVE BY MASCHINENFABRIK REINHAUSEN (MR). [Final Year Project]

Koh, Xu-Ming (2017) DEVELOPMENT OF PREDICTIVE MAINTENANCE DATA ANALYTIC FOR INTERNET OF THINGS (IOT) IMPLEMENTATION. [Final Year Project]

Kamarudin, Mohd Afidz Ainul (2017) IMPROVEMENT AND SYSTEMATIZATION IN BUILDING MAINTENANCE MANAGEMENT MALAYSIA LIQUEFIED NATURAL GAS SDN BHD. [Final Year Project] (Submitted)

Kamarul Zaman, `Aifaa Balqis (2017) Reliability Analysis of Grate Inlets. [Final Year Project] (Submitted)

Kashfi, Mohammadmahdi (2017) Influence of micro-size titanium powders on mechanical properties of powder injection molded 316L stainless steel. [Final Year Project] (Submitted)

KHAN, AURANGZAIB (2017) DEVELOPING A MULTI-HOP BLE NETWORK TO MONITOR PATIENTS WITH CHRONIC DISEASES. [Final Year Project]

KHAIRDDIN, MUHAMAD FIKRI (2017) CHARACTERIZATION AND PROPERTIES INVESTIGATION OF AUTOMOTIVE STEEL EXHAUST PIPING FAILURE. [Final Year Project]

KINAN, AZRIE (2017) COMPUTATIONAL FLUID DYNAMICS (CFD) SIMULATION OF SAND DEPOSITION IN PIPELINE. [Final Year Project]

KAMARUZAMAN, NURUL AFIQAH (2017) SIMULATION OF ADSORPTION COOLING SYSTEM DRIVEN BY WASTE HEAT FROM ENGINE. [Final Year Project]

KHYE YEE, YONG (2017) Obstacle Avoidance System in Underwater Glider. [Final Year Project]

KAR KIN, LOOI (2017) CHARGING PERFORMANCE EVALUATION OF STRATIFIED THERMAL ENERGY STORAGE (TES) BY USING HALF CYCLE FIGURE OF MERIT (1/2 FOM). [Final Year Project] (Submitted)

KAH WAI, EYU (2017) THE EFFECT OF COAGULATION BATH ON THE CELLULOSE ACETATE POLYMERIC MEMBRANE. [Final Year Project]

KE XIN, LOKE (2017) CFD SIMULATION OF NATURAL CONVECTION HEAT TRANSFER IN NANOFLUIDS. [Final Year Project]

KAH WAI, TEOW (2017) DEVELOPMENT OF GEOPOLYMER COMPOSITES WITH BIOPOLYMERS REINFORCEMENT. [Final Year Project]

KAMARUDIN, MUHAMMAD HAZIM (2017) SYNTHESIS OF SUPPORTED CATALYST FOR CONVERSION OF METHANE AND CARBON DIOXIDE TO SYNGAS. [Final Year Project]

KAI BIN, YOONG (2017) SYNTHESIS AND CHARACTERIZATION OF SILYLATED MCM-41/POLYSULFONE MIXED MATRIX MEMBRANE FOR CO2/CH4 SEPARATION. [Final Year Project]

KERUPAGARAN, SAATHISH (2017) A STUDY ON AREA AFFECTED BY THE SPREAD OF BURNING FUEL DURING BOILOVER. [Final Year Project]

Kho, Daren Ying Cheng (2017) Operating Drones under Robot Operating System (ROS). [Final Year Project] (Submitted)

Khan, Abdallah Sadurdeen (2017) Integration of IoT And WBAN for Remote Health Monitoring. [Final Year Project] (Submitted)

Khalid, Muhammad Arif Akmal (2017) Face Recognition Technique for Attendance Management System. [Final Year Project] (Submitted)

KAMILIN, MUHAMAD HAFIZ (2017) CHARACTERIZATION OF SURFACE CRACK ON STAINLESS STEEL PLATE BY LIQUID PENETRANT TEST AND PHASED ARRAY ULTRASONIC TEST (PAUT). [Final Year Project]

KULDIP SINGH, LUPETE KAUR BHULLAR (2017) TECHNO-ECONOMIC ANALYSIS FOR THE PRODUCTION OF BUTYL CELLOSOLVE ACETATE AND EO-3 PHOSPHATE ESTER. [Final Year Project]

L

Loganathan, Rubendran (2017) Deformation Properties of Concrete Containing Crumb Rubber from Scrap Tire as a Partial Replacement to Fine Aggregate. [Final Year Project] (Submitted)

LOGANATHAN, KHUMANANARASU (2017) ADSORPTION KINETICS OF NICKEL IONS REMOVAL BY COCONUT FIBRE CHAR ADSORBENT. [Final Year Project]

LOY CHUN MINH, ADRIAN (2017) Development of Bi-functional Graphene Based Catalyst for Biodiesel Production from Microalgae Oil. [Final Year Project]

Liew, Minzhao (2017) The study of heat transfer enhancement of solar air heater using airfoiled extended surface. [Final Year Project] (Submitted)

LOH, JEREMY GUO XIANG (2017) EEG SIGNAL ANALYSIS FOR HUMAN EMOTIONAL INTELLIGENCE. [Final Year Project] (Submitted)

Liew, Qiao Jun (2017) Software Tool for Brain Morphometry Analysis. [Final Year Project] (Submitted)

LEONG, YUHAO (2017) PERFORMANCE COMPARISON REVIEW OF 8-3 COMPRESSOR ON FPGA. [Final Year Project] (Submitted)

Lee, Zhi Yan (2017) Design, Development and Implementation of Standalone Transmission Control Module for Mercedes-Benz 722.6 5G-Tronic Gearbox. [Final Year Project] (Submitted)

M

Mohammed, Momin Alsir (2017) Protection Coordination Study for Upgrading Heglig Power Grid in Greater Nile Petroleum Operating Company. [Final Year Project]

MASROL, AMIRUL ALIF (2017) DEVELOPMENT OF SECURITY DETECTION USING A WIRELESS SENSOR NETWORKS (WSN). [Final Year Project]

MOHAMED ISA, SITI NAIMAH (2017) INTERNET OF RIVERS AND ITS APPLICATIONS. [Final Year Project]

Mohd Dali, Muhamad Anisrudien (2017) Embedded Virtual Simulator for Vehicle Powertrain Studies. [Final Year Project]

Mohd Faisal Baskaran, Fatimah (2017) Design, Modeling and Simulation of Microhotplate in Gas Detection Application. [Final Year Project]

Mohamad Afandi, Nur Alifah (2017) Harmonic Analysis in Light Rail Transit Traction. [Final Year Project]

MAT DAUD, AMIRA SYAFEQAH (2017) OPTIMIZATION STUDY OF VOLTAGE MULTIPLIER CIRCUIT STAGES IN RF ENERGY HARVESTER. [Final Year Project]

Mohammed Iqbal, Zaid (2017) Speech Recognition using Deep Neural Network. [Final Year Project]

MOHAMAD YAKOP, SYER MOHAMAD KHOMAINIE (2017) APPLICATION OF ARTIFICIAL NEURAL NETWORK FOR PREDICTIVE MAINTENANCE ON PLATE HEAT EXCHANGER. [Final Year Project]

MOHD AMIN, AIMAN NAIM (2017) Effect of Axial Impact Loading On Energy Absorption Capability of Thin-Walled Structures in Automotive Application. [Final Year Project]

MAHADZIR, MOHAMAD LUQMAN (2017) PETROLEUM SLUDGE AS AN ALTERNATIVE FOR GREEN CONSTRUCTION MATERIAL. [Final Year Project] (Submitted)

Mohmad Sakarnor, Muhammad Nadzmi (2017) Impact of Vegetation Species on the Elimination of Total Nitrogen and Total Phosphorus by Bioretention System. [Final Year Project] (Submitted)

Murthy, Kiren Raj (2017) Effect of Crack Propagation on Condition Assessment of Aged Offshore Jacket Platform. [Final Year Project] (Submitted)

Mahadi, Nur Hidayah (2017) Research on Fiber Bragg Grating (FBG) Sensor: Strain and Temperature Measurements. [Final Year Project] (Submitted)

Mohd Yusof, Mohd Kamal (2017) ACCURACY ASSESSMENT OF UTP GPS CONTINUOUSLY OPERATING REFERENCE STATION FOR SIMULATED STRUCTURAL DEFORMATION MONITORING. [Final Year Project] (Submitted)

MOHD TARMIZI, FARIDA HAMIMI (2017) EXPLORING POTENTIAL OF COASTAL RESERVOIRS FOR WATER RESOURCES DEVELOPMENT. [Final Year Project] (Submitted)

Mohd Safri, Ahmad El Afify (2017) STUDY OF RECIRCULATING FLOW AROUND COASTAL STRUCTURE BY USING LABSWETM. [Final Year Project] (Submitted)

Mazuki, Ahmad Izzat Asyraf (2017) Life Cycle Cost Analysis of Highway Project. [Final Year Project] (Submitted)

MOHD FUAD, NORFATIN NAJWA (2017) Decommissioning Asset Management System for Fixed Steel Jacket. [Final Year Project] (Submitted)

MUHAMAD JANI, MUHAMAD AFIQ (2017) ASSESSMENT OF PARTICULATE MATTER 10µM (PM10) TRENDS IN TRONOH. [Final Year Project] (Submitted)

Mohammad Jamin, Wan Izzudin (2017) ADSORPTION OF HEAVY METAL USING SLUDGE ACTIVATED CARBON DERIVED FROM SLUDGE. [Final Year Project] (Submitted)

Mohammed AL-HADHEQ, Abdulghani (2017) Subgrade improvement using lime powder, sand and rice husk ash. [Final Year Project] (Submitted)

Muhd Hasbi, Muhamad Alif (2017) Prediction of Soil Pore Water Pressure Using Polynomial Kernel Support Vector Machine. [Final Year Project] (Submitted)

Muhd Hasbi, Muhamad Alif (2017) Prediction of Soil Pore Water Pressure Using Polynomial Kernel Support Vector Machine. [Final Year Project] (Submitted)

MOHD NAIM, AHMAD FAIZ (2017) IMPINGEMENT OF NON-NEWTONIAN TSUNAMI BORES ON A VERTICAL STRUCTURE. [Final Year Project] (Submitted)

Mohd Azmi, Aqilah (2017) Bond Strength of Concrete Containing Crumb Rubber as Partial Replacement to Fine Aggregate. [Final Year Project] (Submitted)

Mohd Razali, Nawal Nadia Nabilla (2017) The Effect of Compost Variation in Engineered Soil Media on Hydraulic and Hydrologic Performance - Soil Column Study. [Final Year Project] (Submitted)

Mohammad Room, Fazira (2017) Determination of Mangrove Adequacy as Natural Coastal Defence Against Wave Dynamics Using Remote Sensing Analysis for Southern Kedah Coastline. [Final Year Project] (Submitted)

Mior Azman, Mohamad Hafizi (2017) The Impacts of Quarry Activities on Eco-Hydrological Systems. [Final Year Project] (Submitted)

Md Adros, Faiz Hashemi (2017) Assessment of Landscape Characteristics on Spatial Distribution of Soil Moisture Index. [Final Year Project] (Submitted)

Mohd Saidi, Muhammad Hafiz (2017) Comparison Between Thickness Design Based on Arahan Teknik Jalan 5/85 and 5/85 (2013). [Final Year Project] (Submitted)

Mokhtar, Mohamad Nor Syahid (2017) Development of Real-Time IoT based Water Quality Monitoring System. [Final Year Project]

MOHD SYAZWAN, MUHAMMAD ASYRAF (2017) Land-use Conservation Assessment and Its Influence on Rainfall Erosivity Distribution. [Final Year Project] (Submitted)

Matlan, Mohd Joharif (2017) Metallurgical and Mechanical Study of Dissimilar Friction Stir Welding of Carbon Steel and Stainless Steel. [Final Year Project] (Submitted)

Mohd Rashid, Ahmad Syauqi (2017) LIE DETECTION SYSTEM BY USING RESTING-STATE EEG AND P300-BASED GKT. [Final Year Project] (Submitted)

Mohd Johan, Adida (2017) Evaluation of Contributing Factors of Wave-In-Deck Using Pushover Analysis Results for Fixed Jacket Structures. [Final Year Project] (Submitted)

Minzhao, Liew (2017) The Study of Heat Transfer Enhancement of Solar Air Heater Using airfold Extended Surface. [Final Year Project]

MOHAN, GOPI NATH NAMBIAR (2017) INFLUENCE OF DEPOSITION TEMPERATURE ON THE CORROSION RESISTANCE OF ELECTRODEPOSITED ZINC-NICKEL ALLOY COATINGS. [Final Year Project] (Submitted)

Mohamad Ismol, Mohamad Ismail (2017) INVESTIGATION ON THE EFFECTIVENESS OF NITROGEN GAS FOR SURFACE NITRIDING OF INTERNAL PIPE SURFACE EROSION. [Final Year Project]

Mohd Nazri, Muhammad Syamil (2017) MODELLING AND SIMULATION OF PERFORMANCE MAP FOR VARIABLE GEOMETRY AXIAL COMPRESSOR. [Final Year Project]

Mohd Zahid, Muhammad Ilyas (2017) Contact and Bending Stress Analysis of Helical Gear Pair with Tip Relief. [Final Year Project] (Submitted)

Md Noor, Muhammad Aimran (2017) The Effect of Cutting Speed on the Machinability During Drilling D2 Hardened Steel. [Final Year Project]

MOHD SHARFRI, RAIHAN AMALINA (2017) The Development of Synthetic Algorithm of Fluid Flow Through Particle Image Velocimetry (PIV). [Final Year Project]

MOHAMMAD ALSAAFEEN, MOUAATH (2017) Characterization and Properties Investigation on the Industrial Mold finishing stone. [Final Year Project]

MOHD ZAID, AHMAD AMIR FARHAAN (2017) PRODUCTION OPTIMIZATION OF GRAPHENE OXIDE VIA ELECTROCHEMICAL EXFOLIATION. [Final Year Project]

MAZLAN, MOHAMAD HAFEZ (2017) FUZZY LOGIC CONTROL OF FLOTATION COLUMN. [Final Year Project]

MOKHTAR, MUHAMMAD AMIRUL (2017) RECOVERY OF FOOD GRADE ETHANOL FROM INDUSTRIAL WASTE. [Final Year Project]

MOHAMMED JAMIL MUSTAFA MALOSOK, OMAR (2017) STRUCTURED OPERATIONAL READINESS FOR PROCESS SAFETY MANAGEMENT. [Final Year Project]

MAHENDRAN, SARVEEN (2017) EVALUATION OF ENVIRONMENTAL FRIENDLY ULTRA LOW IFT SURFACTANTS FOR CHEMICAL EOR APPLICATION. [Final Year Project]

MD NADZRI, NOR NADIAH NADHIRAH (2017) SIMULATION ON ANHYDROUS ETHANOL PRODUCTION IN EXTRACTIVE DISTILLATION USING GLYCEROL WITH SPLIT-FEED CONFIGURATION. [Final Year Project]

MASH’AL, AL-AMEERAH (2017) ELUCIDATION ON THE EFFECT OF OPERATING TEMPERATURE TO THE TRANSPORT PROPERTIES OF MEMBRANES USING MOLECULAR SIMULATION TOOL. [Final Year Project]

MOHD SHAH, MOHAMED IMRAN SHAH (2017) COMPARATIVE STUDY OF OPEN-LOOP AND CLOSED-LOOP IDENTIFICATION OF MIMO SYSTEMS. [Final Year Project]

Mohd Ala’uyun, Husna Khalilah (2017) Harmonics Analysis at Low Voltage (LV) Systems in Universiti Teknologi PETRONAS (UTP). [Final Year Project] (Submitted)

MOHAMAD SHOFFIAN, MOHAMAD AQIL (2017) DEVELOPMENT OF GANODERMA DETECTION AND IMAGING USING ELECTRICAL RESISTANCE TOMOGRAPHY. [Final Year Project] (Submitted)

Mohamed Firoz, Mohamed Fazari Raidi (2017) Sun Position Tracking in Solar Panel. [Final Year Project] (Submitted)

Mohd Nizam, Ainul Shazwanie (2017) Amplifier and Filter for Geophone Sensitivity Studies. [Final Year Project] (Submitted)

MOHAMAD HUSSIN, NUR HAZIQAH FARAH (2017) REAL TIME CHROMAMETRY MEASUREMENT FOR FOOD QUALITY DETECTION USING MOBILE DEVICE. [Final Year Project] (Submitted)

Mohd Zamri, Muhammad Adib Idzam (2017) Indoor Localization and Guidance using Augmented Reality Toolbox. [Final Year Project] (Submitted)

Mohd Arifin, Izuan Alif (2017) ARDUINO-BASED FALL DETECTION AND ALERT SYSTEM. [Final Year Project] (Submitted)

MOHAMED MASARIK, MUHAMMAD SAFWAN (2017) DESIGN OF LOWPASS FILTER WITH LOW TOTAL HARMONIC DISTORTION. [Final Year Project] (Submitted)

Mohd Shaber, Nasuha (2017) 3D Surface Reconstruction Using Infrared (IR) Signal. [Final Year Project] (Submitted)

MOHAMAD, ISMAIL (2017) MOBILE ROBOT PATH PLANNING USING IMAGE CAPTURED BY A HIGH VIEW CAMERA. [Final Year Project] (Submitted)

Mohd Shahar, Nur Aqilah (2017) Design of Microwave Oscillator for IM3 Measurement Training Kit. [Final Year Project] (Submitted)

Mohd Reduan, Aimi Adhilah (2017) Segmentation of MRI Prostate Images. [Final Year Project] (Submitted)

MOHD SAMSURI, MUHAMAD SHAZARIZUL HAZIQ (2017) CHARACTERIZATION AND PROPERTIES INVESTIGATION OF SINGLE ROW DEEP GROOVE BALL BEARING FAILURE. [Final Year Project] (Unpublished)

MALKEET SINGH, JASPREET KAUR SIDHU (2017) PHYSICOCHEMICAL STUDY OF THERMOPLASTIC STARCH(TPS) USING IONIC LIQUID AS PLASTICIZER. [Final Year Project]

MYADYSOYUNOV, BATYR (2017) ASH DEPOSITION CHARACTERISTICS ON BIOMASS FUEL. [Final Year Project]

N

Nor Salim, Nor Zafry (2017) Assessment of Cutting Technology Above Seabed for Cost Reduction Purpose. [Final Year Project] (Submitted)

Nor Khairul Azha, Nur Nadia (2017) Design and Modelling Linear Motor for Air Conditioning Compressor System. [Final Year Project] (Submitted)

NIZAM AKBAR, AMAR NAZMI ZULKARNAIN (2017) COMPARATIVE ANALYSIS OF OPTICAL FLOW MEASUREMENT TECHNIQUE. [Final Year Project] (Submitted)

Nguan, Heng Kok (2017) Heat Transfer Enhancement on Geothermal Energy Extraction from Unused Oil Well. [Final Year Project]

NANDA KUMAR, KISHEN (2017) CARBOTHERMAL REDUCTION PROCESS OF MILLED AMORPHOUS SILICON DIOXIDE USING TAGUCHI’S METHOD. [Final Year Project] (Submitted)

NAZER MOHAMED, MOHAMED HAZSRIM (2017) THERMODYNAMIC MODELLING OF ORGANIC RANKINE CYCLE (ORC) FOR WASTE HEAT RECOVERY OF A GAS TURBINE ENGINES. [Final Year Project]

NOOR AZAHAN, AHMAD FAIZ SAFWAN (2017) DYNAMIC STABILITY OF AEROSTAT DRONE. [Final Year Project] (Submitted)

NESARAJ, JESHURUN (2017) INVESTIGATION OF THE THERMAL PERFORMANCE OF A SOLAR ASSISTED AIR CONDITIONER UNDER TROPICAL CLIMATE. [Final Year Project]

Naidu GenggayaNaidu, Thineswary (2017) TREATMENT OF PALM OIL MILL EFFLUENT (POME) USING MORINGA OLEIFERA SEEDS AS NATURAL COAGULANT AND NANOFILTRATION MEMBRANE. [Final Year Project]

NAZLIM, MUHAMMAD ARDANY (2017) BINARY IONIC LIQUID USING QUINOLINIUM IODIDE AND 1-BUTYL-3-METHYLIMIDAZOLIUM IODIDE AS ELECTROLYTE FOR DYE-SENSITIZED SOLAR CELL. [Final Year Project] (Unpublished)

NUREEN, MUHAMMAD ZIQQRY (2017) SIMULATION AND ANALYSIS OF ELECTRIC BUS FOR EXTENSION OF OPERATION RANGE AND DURATION. [Final Year Project] (Submitted)

Ng, Guan Shen (2017) A Study of Hypertensive Retinopathy Changes for Stroke Prediction. [Final Year Project] (Submitted)

Norhaidi, Ummi Anisah (2017) Risk Analysis of Lifeline Infrastructures Threaten By Landslide. [Final Year Project] (Submitted)

NASRUDIN, MUHAMMAD ARIF (2017) FABRICATION OF COMPOSITE BALL SOCKET PIPELINE JACKET FOR SUBSEA FLOWLINES PROTECTION SYSTEMS. [Final Year Project]

NORAIMAN, WAN MUHAMMAD (2017) ANALYSIS OF OPTIMAL MANUFACTURING METHOD FOR DISCRETE PARTS WITH THIN SECTIONS. [Final Year Project]

O

Osman, Muhammad Fizwadi (2017) A Study on Efficiency of DC Home System over AC Home System in Low Power Appliances. [Final Year Project]

Ong, Khai Woei (2017) Resonance Monitoring System. [Final Year Project]

Omar, Omar Farouk Ashraf (2017) DRIVE-THRU SUPERMARKET. [Final Year Project]

Othman, Nurul Atikah (2017) Development and Analysis of Trajectory Tracking. [Final Year Project]

Oh, Jia Wei (2017) Seaweed Biocomposite as a Green Construction Material. [Final Year Project] (Submitted)

Othman, Amirul Ashraf (2017) Optimizing Decommissioning: Reuse of Fixed Steel Jacket. [Final Year Project] (Submitted)

Othaman, Mohamad Aiman (2017) DESIGN AND ANALYSIS FOR MIXER AND AMPLIFIER FOR AMATEUR RADIO APPLICATION. [Final Year Project] (Submitted)

P

Perumal, Nyanambkai (2017) Pore Structures and Abrasion of Concrete Containing Crumb Rubber from Scrap Tyre as a Partial Replacement to Fine Aggregate. [Final Year Project] (Submitted)

PATRICK TUNAGI, SWORO (2017) PREPARATION AND CHARACTERIZATION OF CELLULOSE ACETATE (CA)/KIT-6 MIXED MATRIX MEMBRANE. [Final Year Project]

PERUMAL, PRASSHANTH (2017) Evaluation of Hybrid System for Domestic Power Generation by Harvesting of Rainwater. [Final Year Project]

Q

QING, LIM JIA (2017) Solid-state Air Conditioning System for Electric Vehicle Application. [Final Year Project]

R

Rosli, Muhammad Solihin (2017) Design a Reconfigurable Microwave Combline Filter. [Final Year Project]

ROSLI, ROSLINA (2017) THE DEVELOPMENT OF NEXT GENERATION BLOOD PRESSURE MONITOR. [Final Year Project]

Roslan Yong, Mohamad Erdi Asraf (2017) Critical Success Factors of Integrated Team in delivering Sustainable Construction. [Final Year Project] (Submitted)

Rosli, Nur Heiyqal Hidayat (2017) Cost Elements of Offshore Platform Decommissioning in Malaysia. [Final Year Project] (Submitted)

Raja Abdullah, Raja Rosenani (2017) Durability of Rubbercrete Containing Fly Ash and Nano Silica in terms of Deterioration Mechanism through Chemical Attack. [Final Year Project] (Submitted)

Razali, Mohamad Amir (2017) Life Cycle Assessment of Heat Recovery Steam Generator. [Final Year Project]

ROSMAN, MUHAMMAD AIZADT (2017) TEMPERATURE PREDICTION IN HOT TAPPING PROCESS FOR HIGH PRESSURE PIPELINE. [Final Year Project]

RAZMANI, RADHI (2017) OPTIMIZATION STRATEGY IN ENERGY SAVING OF CHILLER PLANT SYSTEMS. [Final Year Project] (Submitted)

RAMLI, MUHAMAD FAIZ (2017) AQUEOUS PHASE REFORMING OF SORBITOL VIA GROUP II DOPED NI/AL2O3 CATALYST FOR VALUE ADDED CHEMICALS PRODUCTION. [Final Year Project]

ROSLAN, MOHAMED YASSIN (2017) DEVELOPMENT OF CONTROL VALVE STICTION DETECTION METHOD USING NEURAL NETWORK (NN). [Final Year Project]

RUSILEH, ELLFIRA FANIRA (2017) DEVELOPMENT OF GRANULATED BLAST FURNACE SLAG-BASED GEOPOLYMER COATING FOR METAL SUBSTRATES. [Final Year Project]

Reisinafchi, Behnam (2017) Research on New Approach to Patient Specific Instruments for Improving Mechanical and Anatomical Alignment Accuracy during Total Knee Arthroplasty. [Final Year Project] (Submitted)

Radzi, Nur Syahirah (2017) Monitoring Fuel Oil Tank Level at Petrol Station. [Final Year Project] (Submitted)

S

Salehian, Sina (2017) Autonomous Camera Alignment System. [Final Year Project]

Shahidi, Mohamad Izzat Asyraf (2017) Design and Analysis of Micro-Strip Yagi Shaped Antenna for Wi-Fi Application. [Final Year Project]

SIHAB, AIDA SYAFIQAH (2017) INTERLEAVED 4-PHASES DC/DC CONVERTER FOR ELECTRIC SCOOTER TO IMPROVE EFFICIENCY. [Final Year Project]

Sobri, Mohamad Hafiz (2017) PID Controller For Six Degrees Of Freedom (DOF) Stewart Platform Hexapod. [Final Year Project]

SUKRI, FIRMAN SYAH (2017) ON CAMPUS IOT DEMONSTRATION FOR STUDENT HOTSPOT TRACKING USING WIRELESS SENSORS NETWORK AND INTEGRATED SOFTWARE PLATEFORM. [Final Year Project]

Shaidan, Nur Sufini (2017) DESIGNING AND MODELLING OF PORTABLE PICO LINEAR GENERATOR FOR WAVE ENERGY CONVERSION SYSTEM. [Final Year Project]

SYED ZAINUDIN, SYED AMIR ADAM (2017) EFFECT OF THE ROTATING BLADES ON THE STABILITY OF FLOATING WIND TURBINE. [Final Year Project] (Submitted)

Sundera Raj, Diviyan Raj (2017) Design of Linear Model for Water Hardness Removal by Activated Coconut Shell Carbon using Design of Experiment Method. [Final Year Project] (Submitted)

Saleh Hoddin, Muhamad Amirul Hafiz (2017) Degradation of Polycyclic Aromatic Hydrocarbon from hazardous waste landfill leachate using Photo-Fenton process. [Final Year Project] (Submitted)

Sabri, Fatin Nabilah (2017) A New Divergence Method for Heat Transfer with Neumann Boundary Condition. [Final Year Project] (Submitted)

SAMSURI, AIN SYAFINAZ (2017) CRITICAL SUCCESS FACTORS AFFECTING QUALITY, COST AND TIME CONTROL IN CONSTRUCTION PROJECTS. [Final Year Project] (Submitted)

Saparuddin, Nurul Ameera (2017) Tensile and Flexural Behaviour of Concrete Containing Crumb Rubber as Partial Replacement of Fine Aggregate. [Final Year Project] (Submitted)

Sazalli, Nurul Farhana (2017) Spatial Analysis for Some UTP Campus Facilities for The Betterment of Their Services. [Final Year Project] (Submitted)

Suhardi, Muhammad Safiq Safwan Hady (2017) Investigation of Titanium Dioxide Reinforcement on Thermal Performance of Siloxane Epoxy Based Intumescent Fire-Retardant Coating Systems. [Final Year Project] (Submitted)

Shakidi, Siti Suaidah (2017) Computational Investigation of Fluidized Drying of Paddy by Air with a State Variable of Time. [Final Year Project]

SEENI MOHAMED, MUHAMMAD ANWAR IBRAHIM (2017) IMPROVING PATIENT'S SATISFACTION USING LEAN HEALTHCARE AND KANO MODEL. [Final Year Project]

Sulaiman, Mohammad Syafiq (2017) Development of Framework for Data and Evidence Collection in Root Cause Analysis for Petrochemical Plant. [Final Year Project]

Suppiah, Avieneish (2017) Development of Alkali Metal through the Ashing of Rice Husk and Kenaf. [Final Year Project]

SINGH, DILRAJDEEP (2017) FORMULATION AND CHARACTERIZATION OF IONIC LIQUID IN OIL MICROEMULSIONS. [Final Year Project]

SINNASAMI, RAVIN (2017) VISCOSITIES OF TRIGLYCERIDES IN A VARIETY OF SOLVENTS. [Final Year Project]

SHARMINI FERNANDES, CHARLENE (2017) Characterisation and Performance Evaluation of Silica Incorporated Membrane for Wastewater Filtration. [Final Year Project]

SAMSUDDIN, NUR EZZATU NISWAN (2017) DRYING OF VIRGIN COCONUT OIL FROM FERMENTATION PROCESS USING DRY AIR METHOD. [Final Year Project]

SELVARAJAH, DESHALINEE (2017) IONIC LIQUID IMPREGNATED ALGINATE BEADS FOR ADSORPTION OF LEAD. [Final Year Project]

Shaharizal, Syafiq (2017) Development of Hybrid Energy Harvester for Self-Powered Environmental Sensor. [Final Year Project] (Submitted)

SUBRAMANIAN, VISALACHY (2017) REMOVAL OF IMPURITIES FROM MILLED AMORPHOUS SILICON DIOXIDE THROUGH THERMAL ANNEALING AND ACID LEACHING USING TAGUCHI METHODS FOR 3C SILICON CARBIDE PHOTOVOLTAIC APPLICATION. [Final Year Project]

T

Tan Bee Chin, Agnes (2017) Design and Synthesis of Surface Acoustic Wave Ladder-Type Filter. [Final Year Project]

Tengku Mohd Nasir, Tengku Muhamad Fizri (2017) Modeling and Development of Hybrid Energy Harvester for Self-Powered Iot Applications. [Final Year Project]

TERRY, DARYL LUKE (2017) VEHICLE DYNAMICS MODELING AND SIMULATION OF A 110 C.C. MOTORCYCLE DURING CORNERING. [Final Year Project]

TAT, HON LIAN (2017) CFD Simulation of Two-phase Slug Flow Liquid Carryover in T-junction Corresponds to Various Diameter Ratio. [Final Year Project]

Tian Hui, Chan (2017) Degradation of Polymers in the Presence of Sulfate Reducing Bacteria Microbes. [Final Year Project]

THAW , ZIN HTUN (2017) A CORROSION STUDY OF PINHOLE COATING DEFECTS IN CARBON DIOXIDE ENVIRONMENT. [Final Year Project]

TAJUL ARIFFIN, MOHD ARIF (2017) CHLORIDE STRESS CORROSION CRACKING FOR 304L AUSTENITIC STAINLESS STEEL. [Final Year Project] (Submitted)

TAHIR, MUHAMMAD HUZAIMI (2017) MODELLING STUDY OF TEMPERATURE EFFECT ON THE EFFICIENCY OF INDUSTRIAL HYDROPURIFICATION PROCESS. [Final Year Project]

TEH, CHOON KEONG (2017) CLASSIFICATION OF BEARING FAULTS USING EXTREME LEARNING MACHINE ALGORITHMS. [Final Year Project] (Submitted)

TANG, HON PANN (2017) Implementation of Graph Based Path Planning Algorithms on a Mobile Robot in a Confined Site. [Final Year Project] (Submitted)

V

VENGADARAMAN, SATESH (2017) WAVE TRANSMISSION, REFLECTION AND ENERGY LOSS OF AN ALTERNATIVELY SUBMERGED GEOTUBE BREAKWATER SUBJECTED TO REGULAR WAVES. [Final Year Project] (Submitted)

VIJAYAKUMAR, THESIKAN (2017) TORSIONAL CONTROL OF STICK-SLIP OSCILLATIONS IN DRILL-STRING SYSTEM. [Final Year Project] (Submitted)

VIN, TAN AL (2017) Investigation of Effectiveness of Statistical Methods to Gas Turbine Vibration Diagnostics and Synthesis of SVM Based Approach. [Final Year Project]

V’shnu Nair, Kamesh (2017) Densification and Combustion Studies of Empty Fruit Bunch and Napier Grass for Pellet Production. [Final Year Project]

W

Wong, Wai Leong (2017) Production of Biodiesel form Annona Muricata Seeds. [Final Year Project] (Submitted)

Wong, Kelvin Toh Kiak (2017) Developing an Emergency Offshore Hazard Map and risk assessment indices using Spatial Decision Support System (SDSS). [Final Year Project] (Submitted)

Wan Abdullah Sani, Wan Muhammad Aiman (2017) Preliminary Study on the Potential of Harvesting Energy from Malaysian Road Pavement. [Final Year Project] (Submitted)

Wan Mohd Yusof, Wan Mardhiah (2017) Connected Devices in Internet-of-things (IoT) for Driver Fatigue Alert System (16S041). [Final Year Project] (Submitted)

Wan Rozuhan, Wan Nur Hamizah (2017) Conversion of Rice Husk into Amorphous Silicon Dioxide Using Taguchi’s Method. [Final Year Project] (Submitted)

WEI JIE, NG (2017) REMOVAL OF DYE FROM AQUEOUS WASTEWATER USING THE TECHNIQUE OF LIQUID-LIQUID EXTRACTION WITH IONIC LIQUID. [Final Year Project]

Wong, Chun Yew (2017) Integration of Image Processing Algorithm and Path Planning for Search and Rescue Robot. [Final Year Project] (Submitted)

WONG, NICHOLAS ZEN NGIU (2017) COST-EFFECTIVE ROTATING INFRA-RED SENSOR FOR ROBOTIC APPLICATIONS. [Final Year Project] (Submitted)

Wan Mat, Wan Muhammad Zubair (2017) Laser Scribed Porous Graphene on Polyimide Film for Flexible Strain Sensor. [Final Year Project] (Submitted)

Y

YAHAYA, AHMAD WAFIY ADLI (2017) CHARACTERIZATION OF ZINC OXIDE AS DIELECTRIC CERAMICS FOR REDUCTION OF INTERFACIAL TENSION BETWEEN OIL AND WATER. [Final Year Project] (Submitted)

YAO, MOK WEN (2017) PERFORMANCE INVESTIGATION OF DESICCANT SYSTEM FOR DEHUMIDIFICATION OF TOPICAL AIR. [Final Year Project]

YOONG, DESMOND LIM CHIN (2017) COMPUTER SIMULATION AND ENERGY ANALYSIS OF LOW ENERGY OFFICE ROOM THROUGH UTILIZING PHASE CHANGE MATERIAL-COUPLED HEAT EXCHANGER. [Final Year Project]

YUAN, SHU SHIK (2017) MIXING DYNAMICS OF STRATIFIED VORTEX PAST TILTED PIPELINE. [Final Year Project]

YUN HOCK, PHUA (2017) APPLICATION OF ORGANIC ADDITIVES AS VOLTAGE ENHANCERS FOR VERMICOMPOST-DERIVED BIO-BATTERY. [Final Year Project]

Yee Rui, Kuek (2017) Production of methanol from carbon dioxide via photocatalysis route. [Final Year Project]

YA CHING, LIM (2017) EVALUATION AND SELECTION OF THIN-LAYER DRYING MODELS FOR DRYING KINETICS OF GRATED COCOS NUCIFERA USING TRAY DRYER. [Final Year Project]

YOONG ZHAN HAO, KLIFF (2017) THE FEASIBILITY STUDY OF ACTIVATED CARBON DERIVED FROM INDUSTRIAL BIOMASS WASTE FOR HEAVY METAL IONS REMOVAL. [Final Year Project]

YIN YAN, SUM (2017) Fatty Acids Extraction from Oil Palm Mesocarp Fiber Through Synergistic Effect of Supercritical Carbon Dioxide and Ethanol as Co-Solvent. [Final Year Project]

YUAN PING, LIM (2017) DESIGN OF A MILLIMETER WAVE WAVEGUIDE BANDPASS FILTER FOR FUTURE 5G MOBILE NETWORKS. [Final Year Project] (Submitted)

Yacob, Muhammad Zulkhairol (2017) Development of Graphene Based Field Effect Transistor (FET). [Final Year Project] (Submitted)

Z

ZAILI, MUHAMMAD FAIRUZ (2017) ROTATING IR SENSORS FOR ROBOTIC MAPPING AND NAVIGATION. [Final Year Project]

Zainal Arifin, Nur Ilyana (2017) Slope Risk Assessment from Geospatial Data. [Final Year Project] (Submitted)

Zulkifli, Hafizul Fahmi (2017) Study on Coral Reefs Influences on Wave Runup Using LABSWETM. [Final Year Project] (Submitted)

Zainal Ariffin, Aina Farzana (2017) Development of Cement-less Brick Using Microbes. [Final Year Project] (Submitted)

Zulkifili, Nur Hamizah (2017) The Influence of Bonding between Pavement Layers on the Performance of Malaysian Road. [Final Year Project] (Submitted)

ZAKARIA, MOHAMAD SYAMIM (2017) EFFECT OF RUDDER DESIGN ON HYDRODYNAMIC FORCES OF AUTONOMOUS UNDERWATER GLIDER. [Final Year Project]

ZAIDI, NURULJANNAH (2017) DEVELOPMENT OF HONEYCOMB CORE FROM NATURAL AND TROPICAL WOOD FIBER FOR STRUCTURAL APPLICATION. [Final Year Project]

ZAMRI, MOHAMAD FAIZ (2017) FABRICATION OF AUTOMOBILE COMPOSITE SHELL STRUCTURE USING COMPRESSION MOLDING PROCESS. [Final Year Project]

Zainur, Muhammad Zakri (2017) Study on Compressibility of Gelled Waxy Crude Oil in Production Pipeline in Relation to Restart Flow. [Final Year Project]

ZAHED, MOHD HAIDAR (2017) Experimental Investigation of Contact and Bending Stresses of Involute Gear Pair. [Final Year Project] (Submitted)

ZI YAN MICHELLE, LEOW (2017) BIODIESEL PRODUCTION USING CANOLA OIL WITH HETEROGENEOUS CATALYST FROM CONVENTIONAL CALCIUM OXIDE VIA MICROWAVE ASSISTED METHOD. [Final Year Project]

ZAINI, AHMAD AIDEED (2017) DEVELOPMENT OF REAL TIME AIR QUALITY MONITORING SYSTEM. [Final Year Project] (Submitted)

Zainon, Muhammad Kamal Rizal (2017) Development of moving object detection and tracking. [Final Year Project] (Submitted)

ZAKARIA, MUHAMMAD HANIF (2017) DESIGN AND ANALYSIS OF SUPERHETERODYNE RECEIVER FOR AMATEUR RADIO. [Final Year Project] (Submitted)

Zulkifly, Muhammad Amirul Azzim (2017) Speech Analysis using Relative Spectral Filtering (RASTA) and Dynamic Time Warping (DTW) methods. [Final Year Project] (Submitted)