Items where Year is 2021

Group by: Creators | Item Type | No Grouping
Jump to: | , | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z
Number of items: 722.

AFSHARIAN, AZADEH (2021) BLENDED LEARNING INDICATORS FOR ENGINEERING EDUCATION. PhD. thesis, Universiti Teknologi PETRONAS.

ALI HUSSAIN, NUR AFANDE (2021) A U-MODEL BASED NONLINEAR ADAPTIVE CONTROL FOR UNDERACTUATED MULTIVARIABLE UNMANNED MARINE VEHICLES. PhD. thesis, Universiti Teknologi PETRONAS.

HUSSAIN, MAHAM (2021) MODEL PREDICTIVE CONTROL DESIGN OF PALM KERNEL SHELL GASIFICATION SYSTEM FOR HYDROGEN PRODUCTION. PhD. thesis, Universiti Teknologi PETRONAS.

SURESH KUMAR, SUBHALAKSHMI (2021) DEVELOPMENT OF SMART ANTI-CORROSION COATINGS WITH METAL ION END CAPPED NANOCONTAINER LOADED WITH SINGLE AND DUO GREEN CORROSION INHIBITORS. Masters thesis, Universiti Teknologi PETRONAS.

,

,, Nurul Arifarhana (2021) The Feasibility of Floating, Production, Storage and Offloading (FPSO) Vessel in Marginal Field. [Final Year Project] (Submitted)

A

A Ganesh, Dinnassh (2021) Evaluation of Economic Production Quantity For Continuous Production System : Case Of Chilled Water Generation, Storage And Distribution. [Final Year Project] (Submitted)

A RAHAMAN, MD SHOKOR (2021) DEVELOPMENT OF TREE-BASED ENSEMBLE LEARNING ALGORITHMS FOR ESTIMATING TOTAL ORGANIC CARBON FROM WIRELINE LOGS. Masters thesis, Universiti Teknologi PETRONAS.

A. Rahman, Ahmad Zairin Fadzil (2021) Failure pressure analysis of corroded pipeline with circumferential interacting defects subjected to combined loadings using FEM and ANN. [Final Year Project] (Submitted)

A/L ANANTHAN, DEVANDRAN (2021) Numerical investigation on the effect of short-crested waves subjected to different cross-sectional shapes. [Final Year Project] (Submitted)

A/L Aeehappa, Thivagar (2021) Slope Stability Analysis on Sedimentary Rock. [Final Year Project] (Submitted)

AB RAHIM, ASYRAF HANIM (2021) SYNTHESIS AND CHARACTERIZATION OF ETHER-FUNCTIONALIZED IONIC LIQUIDS FOR BAMBOO DISSOLUTION BY USING SONOCHEMICAL METHOD. Masters thesis, Universiti Teknologi PETRONAS.

ABD HALIM, MOHAMAD ATHIF (2021) EVALUATION OF TASK SPECIFIC SOLVENTS FOR GAS HYDRATE INHIBITORS. [Final Year Project] (Submitted)

ABD MAJID, NAJWA (2021) SALT AND WATER RECOVERY FROM A MIXTURE OF SALT SOLUTION THROUGH MEMBRANE DISTILLATION-CRYSTALLIZATION. [Final Year Project] (Submitted)

ABD MALEK, MUHAMMAD DZARIF (2021) BOILING HEAT TRANSFER MODELLING USING MACHINE LEARNING ALGORITHM. [Final Year Project] (Submitted)

ABD RAHMAN, NURUL JANNAH (2021) BIFUNCTIONAL Bi2O3/ZrO2 CATALYSTS FOR SYNTHESIS OF THIRD GENERATION BIODIESEL FROM NANNOCHLOROPSIS SP. LIPID. PhD. thesis, Universiti Teknologi PETRONAS.

ABD WAHAB, NUR WASIMAH (2021) HIGH DISPERSION OF IRON CATALYST ONTO CARBON NANOFIBER (CNF) AS CATALYST SUPPORT FOR HABER BOSCH PROCESS. Masters thesis, Universiti Teknologi PETRONAS.

ABD.RAHMAN, FARRAH ATIKAH (2021) EFFECT OF THERMOCHEMICAL TREATMENT TO INCINERATED SEWAGE SLUDGE ASH (ISSA) USING X-RAY DIFFRACTION ANALYSIS. [Final Year Project] (Submitted)

ABDOL SALAM, MUHAMMAD SYAHIR (2021) APPLICATION OF DICATIONIC IONIC LIQUID FOR FUEL CLEANING PROCESS: A RESPONSE SURFACE METHODOLOGY APPROACH. [Final Year Project] (Submitted)

ABDUH SAEED AL-MASGARI, ABD AL-SALAM (2021) SEISMIC SEQUENCE STRATIGRAPHY AND DEPOSITIONAL GEOMETRIES OF MIOCENE - QUATERNARY SUCCESSION OF MALAY BASIN, MALAYSIA: NEW PERSPECTIVES. Doctoral thesis, Universiti Teknologi PETRONAS.

ABDUL AZIZ, AHMAD FUAD (2021) COMPENSATION CIRCUIT OF INDUCTIVELY COUPLED POWER TRANSFER FOR ELECTRIC MOTORCYCLE WIRELESS CHARGING. Doctoral thesis, UNSPECIFIED.

ABDUL AZIZ, MUHAMAD AMIR JOHAN (2021) INVESTIGATING THE POTENTIAL OF TASK SPECIFIC SOLVENTS FOR PREVENTING NAPHTHENATES DEPOSITION IN OIL PRODUCTION FACILITIES: CRITICAL LITERATURE REVIEW. [Final Year Project] (Submitted)

ABDUL AZIZ, MUHAMMAD AMIRUL HAZIQ (2021) CO2 ADSORPTION STUDY ONTO GALLATE-BASE METAL ORGANIC FRAMEWORK. [Final Year Project] (Submitted)

ABDUL FAATAH, AIN SYUHADA (2021) Synthesis, Characterization and Catalytic Evaluation of Sonicated Nickel-based Catalysts for 1,3-Propanediol Production via Aqueous Phase Glycerol Reforming. Masters thesis, Universiti Teknologi PETRONAS.

ABDUL FADIL, NURHAZWANE (2021) PALM OIL-BASED POLYMER GEL FOR WATER SHUTOFF APPLICATION IN LOW-TEMPERATURE RESERVOIRS. Masters thesis, Universiti Teknologi PETRONAS.

ABDUL GHANI ZUKRI, MUHAMMAD SHAFIQ (2021) STUDY OF EFFECTIVENESS BENZOTRIAZOLE LOADED HALLOYSITE NANOTUBE IN EPOXY AS ANTICORROSION COATING ON CARBON STEEL. [Final Year Project] (Submitted)

ABDUL HAMID, MOHD SAMSUDIN (2021) ECO-EFFICIENCY INDEX ANALYSIS OF REINFORCED CONCRETE RESIDENTIAL HOUSES FOR IMPLEMENTATION IN GREEN BUILDING DESIGN. PhD. thesis, Universiti Teknologi PETRONAS.

ABDUL KHALID, SYAZANI (2021) OPTIMIZATION OF PROGRESSIVE FREEZE CRYSTALLIZATION PROCESS FOR PURIFICATION OF ANTHOCYANIN EXTRACT FROM RED PITAYA PEEL. [Final Year Project] (Submitted)

ABDUL MALIK, MUHAMMAD HAZMI (2021) SEISMIC STRATIGRAPHY ANALYSIS OF ABU FIELD, BLOCK PM 318, MALAY BASIN. Masters thesis, Universiti Teknologi PETRONAS.

ABDUL RAHMAN, AL SHAMEIR (2021) CONVERSION OF HYDROGEN SULFIDE (H2S) USING METAL BASED IONIC LIQUIDS. [Final Year Project] (Submitted)

ABDUL RAHMAN, SITI NUR SYAZA (2021) DEVELOPMENT OF ACTIVATED BIOCHAR-BASED CARBON (ABC) MATERIALS FOR REMOVING PHENOLIC-LIKE ORGANICS FROM WASTEWATER. [Final Year Project] (Submitted)

ABDUL RAKESH, MOHD ISQANDAR HAKIMI (2021) COMPARISON STUDY OF RISK-BASED AND GEOGRAPHICAL METHODS ON FLAMMABLE GAS DETECTORS MAPPING FOR OFFSHORE INSTALLATION. [Final Year Project] (Submitted)

ABDUL RASHID, AMIERUL (2021) DEVELOPMENT AND CHARACTERIZATION OF BIO SOLUTION FOR OILY WASTEWATER TREATMENT. [Final Year Project] (Submitted)

ABDULKADIR, BASHIR ABUBAKAR (2021) OPTIMIZATION OF ELECTROSPUN POLYMER ELECTROLYTE BASED ON PVA-K2CO3-SIO2-CELLULOSE COMPOSITE FOR IMPROVED ELECTROCHEMICAL PROPERTIES. Doctoral thesis, UNSPECIFIED.

ABDULLAH FADZIL, ISMAH SYAMILAH (2021) ACIDIC IONIC LIQUID AS CATALYST FOR INVERSE VULCANIZATION REACTION OF SULFUR POLYMER. [Final Year Project] (Submitted)

ABED, SAAD ADNAN (2021) AN IMPROVED HARMONY SEARCH ALGORITHM FOR MULTIPLE DOMINATING SET PROBLEMS. PhD. thesis, Universiti Teknologi PETRONAS.

ABU BAKAR, ZURINA (2021) INTRINSIC MOTIVATION AND JOB SATISFACTION OF FEMALE TEACHERS IN PERAK: THE MEDIATING ROLE OF WORK-FAMILY CONFLICT. Doctoral thesis, UNSPECIFIED.

ABU BAKAR, MOHD AZIZUL (2021) BURST CAPACITY OF REINFORCED THERMOPLASTIC PIPE (RTP) UNDER IMPACT OF LATERAL LOAD. Masters thesis, Universiti Teknologi PETRONAS.

ADAM SHOIEB, MONERA ADAM (2021) THE MINERALOGICAL, GEOCHEMICAL, AND PETROPHYSICAL ANALYSIS OF SILURIAN-DEVONIAN SHALES OF THE KROH FORMATION: THEIR POTENTIAL FOR HYDROCARBON EXPLORATION. PhD. thesis, Universiti Teknologi PETRONAS.

ADNAN, NURAREESYA AMALIN (2021) GEOGRAPHIC INFORMATION SYSTEM (GIS) PIPELINE INSPECTION AND VISUALIZATION. [Final Year Project] (Submitted)

ADNAN, NURNAJLA (2021) Macroscopic and Microscopic Studies of Nanoparticles-Stabilized Foam for Carbon Dioxide Gas Flooding. Masters thesis, Universiti Teknologi PETRONAS.

ADRIANSAH, NUR FAZLINIZA (2021) MICROSCALE STUDY ON WATER INJECTION FLOW PATTERN IN FRACTURED HELE-SHAW CELL. [Final Year Project] (Submitted)

AFANDI, MUHAMMAD ALIFF FARHAN (2021) DECLINE CURVE ANALYSIS: IMPACT OF CALENDAR DAYS AND PRODUCING DAYS TOWARDS RESERVE ESTIMATION USING NONLINEAR REGRESSION METHODS. [Final Year Project] (Submitted)

AHMAD, RABI KABIR (2021) EXPERIMENTAL INVESTIGATION ON COCONUT SHELL BIOMASS PYROLYSIS USING A DOWNDRAFT REACTOR FOR CHARCOAL PRODUCTION. Doctoral thesis, UNSPECIFIED.

AHMAD BADARUDDIN, NUR AQILAH (2021) SIMULATION STUDY ON FUEL COMBUSTION OF WATER-TUBE BOILER IN PALM OIL MILL. [Final Year Project] (Submitted)

AHMAD DAUD, NURUL AMIRA (2021) DEVELOPMENT OF FLY ASH-BASED GEOPOLYMER MEMBRANE FOR METHYLENE BLUE DYE REMOVAL. Masters thesis, Universiti Teknologi PETRONAS.

AHMAD FARID, AHMAD SYAHMI (2021) PROCESS SIMULATION AND OPTIMAL DESIGN OF CROSS-FLOW FILTRATION FOR PRODUCED WATER TREATMENT. [Final Year Project] (Submitted)

AHMAD KAMAL, UMAR MUSLIM (2021) DEVELOPMENT OF ANALYSIS STUDY ON MAINTENANCE DOWNTIME (MAINTAINABILITY) OF EQUIPMENT AND SYSTEM IN PETROCHEMICAL PLANT. [Final Year Project] (Submitted)

AHMAD LATIFF, NOOR RASYADA (2021) EFFECT OF COBALT SUBSTITUTION ON THE SATURATION MAGNETIZATION OF MAGNETITE FOR ENHANCED OIL RECOVERY. Doctoral thesis, UNSPECIFIED.

AHMAD SUHAIMI, MUHAMMAD SYAKIR (2021) COMPARISON OF VARIOUS PAVEMENT THICKNESS DESIGN METHOD. [Final Year Project] (Submitted)

AHMAD YUNUS, NUR HIDAYAH (2021) DEVELOPMENT OF AMINOSILANE GRAFTING ON SAPO-34/ POLYSULFONE MIXED MATRIX MEMBRANE FOR CO2/CH4 SEPARATION. [Final Year Project] (Submitted)

AKHTER, JAVE (2021) THEORETICAL AND EXPERIMENTAL EVALUATION OF A MODIFIED COMPOUND PARABOLIC CONCENTRATING SOLAR COLLECTOR USING OIL-BASED NANOFLUIDS. Doctoral thesis, UNSPECIFIED.

AL-AMIN, MD (2021) COATING OF BIOMEDICAL GRADE 316L STAINLESS STEEL WITH HA/MWCNT USING PM-EDM PROCESS. Masters thesis, Universiti Teknologi Petronas.

AL-ATESH, EZZADDIN ABDULLAH ALI (2021) DECISION-MAKING MODEL FOR SELECTING GREEN BUILDING MATERIALS IN SUPPORTING MALAYSIAN SUSTAINABILITY. Masters thesis, Universiti Teknologi PETRONAS.

AL-DHAWI, BAKER NASSER SALEH (2021) BIOKINETICS OF ORGANICS AND NUTRIENTS REMOVAL OF WASTEWATER TREATMENT USING PALM OIL CLINKER (POC) MEDIA IN A SUBMERGED ATTACHED GROWTH SYSTEM. Masters thesis, Universiti Teknologi PETRONAS.

AL-NINI, AHMED AHMED MOHSEN (2021) FLEXURAL BEHAVIOUR OF HIGH-PERFORMANCE FIBRE REINFORCED COMPOSITE-FILLED DOUBLE SKIN STEEL TUBE BEAMS WRAPPED CARBON FIBRE REINFORCED POLYMER SHEETS. Masters thesis, Universiti Teknologi PETRONAS.

AL-QURAISHI, MAGED SLAEH SAEED (2021) MULTIMODAL APPROACH BASED ON PHYSIOLOGICAL SIGNALS FOR DETECTION AND RECOGNITION OF THE LOWER LIMB MOVEMENTS. Doctoral thesis, UNSPECIFIED.

AL-SABAEEI, ABDULNASER MOHAMMED (2021) BIOCOMPOSITE MODIFIED BITUMEN (BMB) FOR DURABLE PAVEMENT. PhD. thesis, Universiti Teknologi PETRONAS.

ALI, MUJAHID (2021) INTERACTION OF TIME-USE AND ACTIVITY TRAVEL PARTICIPATION ON THE PHYSICAL AND SOCIAL HEALTH OF TRAVELERS. Masters thesis, Universiti Teknologi PETRONAS.

ALI AL-WAJIH, RANYA AHMED ABDO (2021) An improved grey wolf optimizer for wrapper feature selection using harris hawks optimization. Masters thesis, Universiti Teknologi PETRONAS.

ALI ALZANAM, ALI AREF (2021) Multifunctional resin-based nanocomposite coated proppants as propping agent with enhanced mechanical and thermal properties and scale inhibitor active adsorber. Masters thesis, Universiti Teknologi PETRONAS.

ALQUSHAIBI, ALAWI ALI ALI MANEA (2021) ENHANCED WEIGHT OPTIMIZED RECURRENT NEURAL NETWORKS BASED ON SINE COSINE ALGORITHM FOR WAVE HEIGHT PREDICTION. Masters thesis, Universiti Teknologi PETRONAS.

ALWASITI, HAIDER (2021) MOTOR IMAGERY CLASSIFICATION FOR BCI USING STOCKWELL TRANSFORM, DEEP METRIC LEARNING, AND DCNN WITH MIXUP AUGMENTATION. PhD. thesis, Universiti Teknologi PETRONAS.

ALYAN, EMAD AHMED MUBARAK (2021) EEG-FNIRS FUSION APPROACH FOR THE MEASUREMENT OF WORKPLACE STRESS RELATED TO DESIGN AND NOISE. PhD. thesis, Universiti Teknologi PETRONAS.

AMBEHABATI, SAMITHA (2021) REGENERATION STUDY AND DETERMINATION OF CO2 BREAKTHROUGH CURVE OF WASTE RUBBER SEED SHELL ACTIVATED CARBON. [Final Year Project] (Submitted)

AMINUDIN, ARINAH MARIAM (2021) WAVE ENERGY ASSESSMENT IN DUMARAN ISLAND, PALAWAN, PHILIPPINES. [Final Year Project] (Submitted)

AMINUR RASHID, MUHAMMAD FAKHRUL ARIFFIN (2021) CHARACTERISATION OF ORGANIC-INORGANIC HYBRID COMPOSITE ADSORBENT DERIVED FROM OIL PALM EMPTY FRUIT BUNCH AND ALUM SLUDGE. [Final Year Project] (Submitted)

AMIR, ALIYA NAJIHA (2021) P-BBA: A MASTER/SLAVE PARALLEL BINARY-BASED ALGORITHM FORMINING FREQUENT ITEMSETS IN LARGE-SCALE DATASETS. Masters thesis, Universiti Teknologi PETRONAS.

AMIR SOFFIAN, MUHAMMAD ASHRAF (2021) NUMERICAL MODELING OF SUPERHEATED STEAM CONDENSATION IN HEAT EXCHANGER. [Final Year Project] (Submitted)

AMMAD, SYED (2021) A FRAMEWORK FOR PERSONAL PROTECTIVE EQUIPMENT(PPE) IMPLEMENTATION IN INFRASTRUCTURE PROJECTS. Masters thesis, Universiti Teknologi PETRONAS.

AMMAR, NUR QAMARINA (2021) A BINARY MIXTURE OF IONIC LIQUID AND GAS CONDENSATE AS A SOLVENT TO ENHANCE DISSOLUTION OF WAX IN OIL TRANSPORT PIPELINE. [Final Year Project] (Submitted)

AMRI, HAZWAN ARIEF (2021) GREEN FUEL SYNGAS PRODUCTION WITH AN ADJUSTABLE H2/CO RATIO OVER GREEN BIMETALLIC CATALYST. [Final Year Project] (Submitted)

ANAK PENGUANG, ALVIN LEON ANJIE (2021) COOLING STRATEGIES OF LITHIUM-ION BATTERIES USING AIR. [Final Year Project] (Submitted)

ANAK RADIN, DAISY (2021) WATER-BASED DRILLING FLUID FORMULATION USING GRAPHENE NANOPARTICLES FOR UNCONVENTIONAL SHALE APPLICATION. [Final Year Project] (Submitted)

ANDI RADI, ANDI MOHD SYAIFUL (2021) THE STUDY OF THE EFFECT OF TEMPERATURE AND PH VALUE ON ADSORPTION CHARACTERISTICS OF UREA BASED SACRIFICIAL AGENT IN POROUS MEDIA. [Final Year Project] (Submitted)

ANMOL, FATIMA (2021) PREDICTION AND CONTROL OF AN INDUSTRIAL DEBUTANIZER COLUMN COMPOSITIONS USING ANN AND ANFIS TECHNIQUES. Masters thesis, Universit Teknologi PETRONAS.

ANUAR, AHMAD HAKIMATULLAH (2021) OPTIMIZING OPERATING PARAMETERS OF NAPHTHA STABILIZER DISTILLATION COLUMN TO IMPROVE PRODUCT QUALITY WITH MINIMUM ENERGY REQUIREMENTS. [Final Year Project] (Submitted)

ANUAR, ANIS SURAYA (2021) TOXICITY ASSESSMENT OF IONIC LIQUIDS TOWARDS VIBRIO FISCHERI BY USING QSAR TECHNIQUE. [Final Year Project] (Submitted)

ANUAR, MOHAMAD ASEEF (2021) INVESTIGATION OF HYDROLYSED POLYACRYLAMIDE AND PHENOL FORMALDEHYDE RESIN FOR WATER SHUT OFF. [Final Year Project] (Submitted)

AONG, BENG HUI (2021) MEFENAMIC ACID EXTRACTION FROM WASTEWATER GENERATED IN HOSPITAL USING IONIC LIQUID BASED EMULSION LIQUID MEMBRANE TECHNOLOGY. [Final Year Project] (Submitted)

ARIFFIN, ARIFF SYAZWAN (2021) STUDY OF AMINE-BASED CO2 CAPTURE TECHNOLOGY USING ANFIS AND ANN. [Final Year Project] (Submitted)

ARPANDI, MUHAMMAD AMIR AQMAR (2021) VALIDATION OF KINETIC MODEL FOR GLYCEROL CONVERSION TO DIGLYCEROL. [Final Year Project] (Submitted)

ARSHAD, USHTAR (2021) Experimental Investigation and Data-driven Modeling of the Minimum Ignition Temperature of Corn and Iron Dust. Masters thesis, Universiti Teknologi PETRONAS.

ATO, QUAINOO KWAMENA (2021) EVALUATING NATURAL AMINO-ACIDS AS EFFECTIVECLAY STABILIZERS FOR WATER-BASED FLUIDS: EXPERIMENTAL AND COSMO-RS SIMULATION STUDIES. Masters thesis, Universiti Teknologi PETRONAS.

ATTA, DENNIS YAW (2021) EXPERIMENTAL EVALUATION OF L-AMINO ACID AS CHEMICAL AGENT FOR ENHANCED OIL RECOVERY. Masters thesis, Universiti Teknologi PETRONAS.

AWAIS, MUHAMMAD AHSAN (2021) CLASSIFICATION OF MOTOR IMAGERY BASED ELECTROENCEPHALOGRAPHIC BRAIN COMPUTER INTERFACE USING BRAIN CONNECTIVITY. Masters thesis, Universiti Teknologi PETRONAS.

AZAMI, NAZMIR IKHWAN (2021) AUTOMATED TARGETING MODEL FOR EVALUATION OF ENERGY STORAGE TECHNOLOGIES IN HYBRID POWER SYSTEMS. [Final Year Project] (Submitted)

AZHAR, AMELIA (2021) A BINARY MIXTURE OF BIO-BASED SURFACTANT AND IONIC LIQUID SURFACTANT AS ‘GREEN’ DISPERSANT FOR OIL SPILL REMEDIATION. [Final Year Project] (Submitted)

AZHAR, MUHAMMAD HAZIQ SYAHMI (2021) MOLECULAR SIMULATION OF ZIF-8 FOR CO2 CAPTURE. [Final Year Project] (Submitted)

AZHARI, AMMAR FIRDAUS (2021) GRATED COCONUT WASTE (GCW) FOR METHYLENE BLUE DYE ADSORPTION. [Final Year Project] (Submitted)

AZLAN, AHMAD HADI (2021) PREDICTION METHOD OF WAX DEPOSITION RISK OF MALAYSIAN CRUDE. [Final Year Project] (Submitted)

AZLAN, NUR AAINAA NADIRAH (2021) AUTOMATIC DETECTION OF MASSES FROM MAMMOGRAPHIC IMAGES VIA ARTIFICIAL INTELLIGENCE TECHNIQUES. Masters thesis, Universiti Teknologi PETRONAS.

AZLAN SHAH, EZMIR NAQQEES (2021) ANALYSIS ON RHEOLOGICAL BEHAVIOR AND FILTRATION PERFORMANCE OF WATER BASED DRILLING FLUID MODIFIED BY HYBRID NANOPARTICLES: GRAPHENE-HEXAGONAL BORON NITRIDE. [Final Year Project] (Submitted)

AZLIE, LYNNIE AFIERRA (2021) COMPARATIVE STUDY OF SAND CONTROL METHODS IN SELECTIVE SABAH BASIN. [Final Year Project] (Submitted)

AZMAN NOR, ALIF NUR AIMAN (2021) STUDY OF STABILITY AND RHEOLOGICAL PROPERTIES OF CTAB-BASED EMULSION. [Final Year Project] (Submitted)

AZMI, NOOR SARA ANISAH (2021) ELUCIDATION OF THE EFFECT OF OPERATING CONDITIONS ON THE FOAMING BEHAVIOR OF METHYL DIETHANOLAMINE (MDEA) PIPERAZINE SOLVENT BLEND USED FOR CO2 ABSORPTION IN THE PRESENCE OF BICINE. [Final Year Project] (Submitted)

AZMI, AZYAN SYAHIRA (2021) SEDIMENTOLOGY AND SOURCE ROCK EVALUATION OF THE JURASSIC - CRETACEOUS DEPOSITS IN CENTRAL PAHANG, MALAYSIA. Masters thesis, Universiti Teknologi Petronas.

Abd Manaf, Aiman Shaker (2021) The Effect Of Origami-Inspired Quadrilateral Mesh On The Mechanical Behaviour Of Carbon Fiber Reinforced Silica Composite. [Final Year Project] (Submitted)

Abd Razak, Amir Al Hafiz (2021) Biochemical Oxygen Demand Removal Enhancement of Agricultural Runoff Using Treatment Train System. [Final Year Project] (Submitted)

Abdul Fatah, Muhammad Faris Fahmi (2021) The Effect of the Involvement of Other Persons Within Activity Travel Patterns On People's Social and Mental Health. [Final Year Project] (Submitted)

Abdul Halim, Muhammad Hafiz (2021) THE INFLLUENCE OF TEMPERATURE ON THE CORROSION BEHAVIOUR OF GLASS FIBRE REINFORCED POLYMER STRENGTHENED STEEL. [Final Year Project] (Submitted)

Abdul Malik, Aida Marini (2021) Investigating the Effect of Cornering Maneuver on the Bituminous Racetrack Pavement Performance. [Final Year Project] (Submitted)

Abdul Razak, Muhammad Hafiz Isyraf (2021) Remote Irrigation Monitoring For Smart Greenhouse. [Final Year Project] (Submitted)

Abdul Razak, Muhammad Sallehuddin Yusof (2021) IOT RIVER POLLUTION MONITORING SYSTEM USING LORA. [Final Year Project] (Submitted)

Abdullah, Ahmad Zaimmul Adli (2021) Remaining Useful Life Assessment of Pipeline via Finite Element Analysis and FITNET FFS Method by Evaluating Burst Pressure of Cylindrical Pipeline and Probabilistic Method. [Final Year Project] (Submitted)

Abdullah, Kamal Hanafi (2021) DEVELOPMENT OF RELIABILITY, AVAILABILITY AND MAINTAINABILITY MODEL FOR RECIPROCATING COMPRESSOR IN MRCSB. [Final Year Project] (Submitted)

Adam Adonis, Iskandar Danial (2021) Mobile Application Utilization for Measuring Wettability. [Final Year Project] (Submitted)

Adnan, Siti Nur Fatihah (2021) SYNGAS PRODUCTION VIA COMBINED STEAM AND CO2 REFORMING OF METHANE OVER CARBON RESISTANT NI/KCC-1 CATALYST. [Final Year Project] (Submitted)

Affendy, Muhammad Hakiim (2021) Parametric Studies on FPSO Mooring Tension for Various Mooring Line Materials. [Final Year Project] (Submitted)

Ahmad, Khairun Radhiah (2021) Framework for Successful Implementation of Sustainable Construction in Infrastructure Projects. [Final Year Project] (Submitted)

Ahmad Fahmi Lim, Aimi Fazira (2021) MULTIVARIATE PROCESS MONITORING OF STRUCTURAL CHANGES USING CUSUM AND EWMA-BASED MULTISCALE PCA. [Final Year Project] (Submitted)

Ahmad Fauzi, Abu Zar (2021) Performance Evaluation of Hot Mix Asphalt containing Recycled Asphalt Pavement. [Final Year Project] (Submitted)

Ahmad Fauzi, Muhamad Faiz Danial (2021) COMPUTATIONAL FLUID DYNAMIC (CFD) INVESTIGATION ON PERFORMANCE OF PARABOLIC TROUGH COLLECTOR (PTC) USING OIL BASED NANOFLUID. [Final Year Project] (Submitted)

Ahmad Rusli, Muhammad Amin (2021) Flow Characteristics for Pipeline Placed Crossing a River. [Final Year Project] (Submitted)

Ahmad Tarmizi, Muhammad Syahiman (2021) Development of Water Budget Equation for Single and Series Bioretention Systems. [Final Year Project] (Submitted)

Ali Asgar, Almalik Abdullah (2021) COMPUTATIONAL MODELLING OF OPEN CHANNEL FLOW SUBJECTED TO ENERGY DISSIPATOR USING LATTICE-BOLTZMAN METHOD. [Final Year Project] (Submitted)

Ami Ardi, Muhamad Afiq Affandi (2021) INVESTIGATIONS OF MECHANICAL PROPERTIES AND MICROSTRUCTURE ANALYSIS OF AL 7075 GNP’S COMPOSITES. [Final Year Project] (Submitted)

Ami Ardi, Muhamad Afiq Affandi (2021) INVESTIGATIONS OF MECHANICAL PROPERTIES AND MICROSTRUCTURE ANALYSIS OF AL 7075 GNP’S COMPOSITES. [Final Year Project] (Submitted)

Amirthalingam, Triambakan (2021) RFID SMART ELECTRONIC VOTING MACHINE(EVM). [Final Year Project] (Submitted)

Amirzali, Nurizzati Binti Amirzali (2021) Experimental Study on the Influence of Embedded Length on Bond Behaviour Between Reinforcement Bar and Engineered Geopolymer Composite. [Final Year Project] (Submitted)

Anuar Shah, Nur Afiq Arif Shah (2021) Application of Tea Waste Biochar for Degradation of Micropollutants from Wastewater. [Final Year Project] (Submitted)

Appanna, Pretta Malaysia (2021) THE EFFECTS OF CRUMB RUBBER TREATMENTS ON THE INTERFACIAL BONDING WITH HARDENED CEMENT MATRIX. [Final Year Project] (Submitted)

Asun, Fiorentina Richelle (2021) Evaluation of Life Cycle Assessment in Drinking Water Treatment Plant. [Final Year Project] (Submitted)

Aswane, Muhammad Elishah Asylam (2021) Simulating the Impact of Extreme Aircraft Loading on the Performance of Bituminous Pavement for Airport Application. [Final Year Project] (Submitted)

Azahar, Siti Zunairah (2021) Developing Knowledge Base Website with an Intelligent Search Engine. [Final Year Project] (Submitted)

Azarol Nazwi, Azril Aiman (2021) Feasibility of Single Barrel Heave Compensator 5MT. [Final Year Project] (Submitted)

Azhari, Muhammad Naqiyuddin (2021) PROCESS SIMULATION AND TECHNO-ECONOMIC ANALYSIS OF ƴ- ALUMINA PRODUCTION FROM SECONDARY ALUMINIUM DROSS. [Final Year Project] (Submitted)

Azian Sufardi, Nur Alia Shafiah (2021) Fake News on COVID-19 Detector, CovFaq. [Final Year Project] (Submitted)

Azizzulrahman, Siti Nuur Shahira Shadzlin (2021) Response Surface Methodology (RSM) on Extraction of Silica Particle from Rice Husk Ash. [Final Year Project] (Submitted)

Azlan, Alissa binti Azlan (2021) MOLECULAR DYNAMIC SIMULATION STUDY ON ADMISSIBILITY OF GREEN ADDITIVES IN HYDRAULIC FRACTURING FLUID. [Final Year Project] (Submitted)

Azman, Azizul Qusyairin (2021) COVID-19 Sentiment Analysis Dashboard on Tweets and Trending Hashtags. [Final Year Project] (Submitted)

Azman, Ezzat (2021) Investigating the Effect of High Vehicle Speed and High Traction Forces on the performance of Formula-one Racetrack. [Final Year Project] (Submitted)

Azman, Muhammad Aidil Aiman (2021) Experimental Investigation on Flexural Behavior of Sandwich Sections Utilizing Engineered Geopolymer Composites (EGC), Ordinary Portland Cement (OPC) and Engineered Cementitious Composite (ECC). [Final Year Project] (Submitted)

Azman, Nur Athirah Alwani (2021) BIM Implementation for Safety Control in Infrastructure Projects. [Final Year Project] (Submitted)

B

BABA, MAVEEYA (2021) OPTIMIZATION OF PHASOR MEASUREMENT UNIT PLACEMENT USING SEVERAL PROPOSED CASE FACTORS FOR POWER NETWORK MONITORING. Masters thesis, Universiti Teknologi PETRONAS.

BABATUNDE, KAWTHAR ADEWUMI (2021) MOLECULAR MODELING OF MULTICOMPONENT ADSORPTION ON HETEROGENEOUS SHALE MINERALS. Masters thesis, Universiti Teknologi PETRONAS.

BADRUL HISHAM, MUHAMMAD AMIRUL DANIEL (2021) COMPUTER SIMULATION FOR DESULPHURIZATION OF FUEL USING TERNARY GLYCOL-BASED EUTECTIC MIXTURE. [Final Year Project] (Submitted)

BADRULZAMAN, IQMAL HAKEEM (2021) OPTIMIZATION OF PROCESS VARIABLES OF PEBAX-1657/SAPO-34 FOR ETHYLENE RECOVERY BY USING STATISTICAL APPROACH. [Final Year Project] (Submitted)

BAHARUDEAN, NUR NADIRAH (2021) Studies on Polyacrylonitrile-Methylcellulose Blend Based Electrolytes for Application in Symmetric Electrochemical Double Layer Capacitor. Masters thesis, Universiti Teknologi PETRONAS.

BAHARUDIN, AMEER NAQIUDDIN (2021) ESTER-BASED COMPOUND AS POTENTIAL FLOW IMPROVER. [Final Year Project] (Submitted)

BALA, ABUBAKAR (2021) HYBRID METAHEURISTIC ALGORITHM BASED OPTIMIZATION OF ECHO STATE NETWORK FOR FAULT PREDICTION IN AIRCRAFT ENGINES. Doctoral thesis, UNSPECIFIED.

BALAKRISHNAN, THIVYA (2021) STUDY ON THE REMEDIATION TECHNIQUES FOR USED HOLLOW FIBER MEMBRANE TOWARDS THE IMPROVEMENT OF CO2/CH4 SEPARATION. [Final Year Project] (Submitted)

BANERJEE, ATANU (2021) ESTABLISHING THE DEEP-WATER DEPOSITIONAL ELEMENTS AND SYSTEMS IN THE DANGEROUS GROUNDS, NW SABAH PLATFORM REGION, MALAYSIA. PhD. thesis, Universiti Teknologi PETRONAS.

BAVOH, CORNELIUS BORECHO (2021) THE IMPACT OF IONIC LIQUIDS ON HYDRATE SEDIMENTS DRILLING MUD RHEOLOGICAL AND HYDRATE INHIBITION PROPERTIES. PhD. thesis, Universiti Teknologi PETRONAS.

BISWAS, KALLOL (2021) A MODIFIED PARTICLE SWARM OPTIMIZATION ALGORITHM FOR WELLBORE TRAJECTORY DESIGN. Masters thesis, Universiti Teknologi PETRONAS.

BORHAN, NOORAZLENAWATI (2021) SYNTHESIS AND CHARACTERISATION OF FATTY HYDRAZIDE DERIVATIVES TO ACT AS NAPHTHENATE INHIBITOR-DEMULSIFIER. Masters thesis, Universiti Teknologi PETRONAS.

Bahari, Muhammad Rahimi (2021) DESIGN AND ANALYSIS OF SUSTAINABLE URBAN DRAINAGE SYSTEM USING EPA-SWMM: A CASE STUDY OF UTP ACADEMIC COMPLEX. [Final Year Project] (Submitted)

Balachandran, Mokhan (2021) Thermal Comfort Study of a Building Equipped with Nanofluid Assisted Thermoelectric Air Conditioner for the Hot Humid Climate of Malaysia. [Final Year Project] (Submitted)

Balwant Singh, Galvinjit Singh (2021) Numerical Investigation for the Diffraction of Wave Forces due to Array. [Final Year Project] (Submitted)

Baskaran, Balakumariswaran (2021) Enhancement of BOD Removal Using Treatment Train System for Stormwater Runoff. [Final Year Project] (Submitted)

Boon Wei, Cheah (2021) Stress Analysis on Steel Box Girder of Long Span Suspension Bridges Based on Finite Element Analysis Methods. [Final Year Project] (Submitted)

Brynner, Parir Elvis (2021) SEVERITY OF VULNERABILITIES IN FEATURES AND ITS COUNTERMEASURES TO ENSURE DATA SECURITY AND PERSONALIZED DATA SAFETY IN AN AUTONOMOUS DRIVING WEB APPLICATION WITH CLOUD STORAGE IN THE EU. [Final Year Project] (Submitted)

C

CHAN, LEE JING (2021) STUDY OF CRITICAL MICELLE CONCENTRATION OF MIXED SURFACTANT IN PURE WATER. [Final Year Project] (Submitted)

CHANDERENG, NAWIIN (2021) Development and Characterization of Carbon Quantum Dots from Green Synthesis Route for Potential Supercapacitor Application. [Final Year Project] (Submitted)

CHANDRAN, ALWIN POORANA (2021) REMOVAL OF CARBON DIOXIDE FROM LANDFILL GAS BY USING PEBAX-1657/HIERARCHICAL ZEOLITE T MIXED MATRIX MEMBRANE OPTIMIZATION. [Final Year Project] (Submitted)

CHANDRASAGARAN, DIVYA (2021) DEVELOPMENT OF INHERENT SAFETY INDEX (ISI), HAZARD IDENTIFICATION & RANKING (HIRA) AND SAFETY WEIGHTED HAZARD INDEX (SWEHI) FOR PROCESS SAFETY EVALUATION OF DIMETHYL ETHER PRODUCTION ALONGSIDE INHERENTLY SAFER DESIGN (ISD) INITIATIVE AND IT’S CORRESPONDING QUANTITATIVE RISK ANALYSIS (QRA). [Final Year Project] (Submitted)

CHAWFA, FAZEDEKA (2021) EXPERIMENTAL STUDY ON THE HEAT TRANSFER CHARACTERISTICS OF HYBRID NANOFLUID USING GRAPHENE NANOPLATELETS AND SILICON CARBIDE IN THERMAL OIL. [Final Year Project] (Submitted)

CHE HASSAN, NUR MUHAMMAD HADRI (2021) FIELD OBSERVATION OF GROUND RESPONSE DUE TO PIPE JACKING CONSTRUCTION UNDERNEATH ELECTRIC TRAIN SERVICE RAILWAY TRACK. Masters thesis, Universiti Teknologi PETRONAS.

CHEA, TAN BEE (2021) EFFECTS OF NANOPARTICLES IN SURFACTANT ON FOAM STABILITY FOR GAS MOBILITY CONTROL. Masters thesis, Universiti Teknologi PETRONAS.

CHENG, KAI BOON (2021) EXTRACTION AND CHARACTERIZATION OF LIGNIN FROM COCONUT HUSKS AS POTENTIAL SURFACTANT: A CRITICAL LITERATURE REVIEW. [Final Year Project] (Submitted)

CHEW, CHIN SHEN (2021) APPLICATION OF PORTABLE CHEMICAL DETECTOR IN QUANTIFYING PROCESS MIXTURES. [Final Year Project] (Submitted)

CHIN, ADAM REDUAN (2021) PORE-SCALE MODELLING OF FLOW BOILING HEAT TRANSFER IN METAL FOAM HEAT EXCHANGER. [Final Year Project] (Submitted)

CHIN, KAREN MAY LIN (2021) DEVELOPMENT AND COST ANALYSIS OF A NEW IBS SYSTEM. [Final Year Project] (Submitted)

CHONG, QI ZHENG (2021) STUDY AND DEVELOPMENT OF MINIMUM IGNITION ENERGY FOR DUST EXPLOSION. [Final Year Project] (Submitted)

CHONG, CHEE KEONG (2021) SYNTHESIS OF 3D MRI BRAIN IMAGES WITH SHAPE AND TEXTURE GENERATIVE ADVERSARIAL DEEP NEURAL NETWORKS. Masters thesis, Universiti Teknologi PETRONAS.

CHONG, SE CHERN (2021) PREDICTIVE MODELLING FOR BASE OIL PROPERTIES. [Final Year Project] (Submitted)

COANA, ARMANDO FRANCISCO (2021) OPTIMIZATIONS OF COMMINGLE FLOW USING AUTOMATIC FLOW RATE CONTROL USING RESERVOIR SIMULATION. [Final Year Project] (Submitted)

COMANDA MOMADE, ABDUL CARIM (2021) RHEOLOGICAL MODELING AND EXPERIMENTAL RESEARCH PROGRESS ON HYDRATE SLURRY RELATED APPLICATIONS. [Final Year Project] (Submitted)

COSSA, KÁTIA NELSON (2021) SAPONIN INTERFACIAL TENSION MEASUREMENTS CRITICAL ANALYSIS. [Final Year Project] (Submitted)

Chan, Yong Yeah (2021) Developing Strategies of Integrated Whole System Design Approach for Energy Efficient Buildings. [Final Year Project] (Submitted)

Chang, Jia Wei (2021) Push-Out Test on SCS sandwich composite members with various concrete cores and shear connectors. [Final Year Project] (Submitted)

Cheah , Yuen Hung (2021) Experimental Study of the Influences of Temperature and Thermal Insulation on Stress Corrosion Cracking using 3-point bend test. [Final Year Project] (Submitted)

Chong, Hao Nan (2021) PELLETIZATION OF TORREFIED NAPIER GRASS. [Final Year Project] (Submitted)

Crist Ting, May Yie (2021) Microstructural and Mechanical Behaviour of Powder Metallurgy Processed TiC Reinforced Al7075-Based Composites. [Final Year Project] (Submitted)

D

DALHA, IBRAHIM BABANGIDA (2021) EXPERIMENTAL INVESTIGATION AND OPTIMIZATION OF SYNTHETIC BIOGAS INTAKE AND MIXING REGIMES IN DUAL-FUEL RCCI COMBUSTION. Doctoral thesis, UNSPECIFIED.

DAMIYATI, NADHRAH (2021) DEVELOPMENT OF COPPER CATALYST FOR ELECTROCHEMICAL REDUCTION OF CARBON DIOXIDE. [Final Year Project] (Submitted)

DERAHMAN, ROSMANIZAH (2021) UNDERSTANDING MALAY ELDERLY’S EMOTION IN CONSUMPTION EXPERIENCE OF SOCIAL SUPPORT AND LIFE SATISFACTION FROM ISLAMIC PERSPECTIVES. PhD. thesis, Universiti Teknologi PETRONAS.

DHANAPALAN, NAGAAMMAI (2021) AMINO FUNCTIONALIZED CARBON DOTS & HYDROXYAPATITE AS DRUG DELIVERY AGENT. [Final Year Project] (Submitted)

DZULHIKAM, DZULAISAR (2021) EFFECTS OF AMPLITUDES OF EXTERNAL MECHANICAL EXCITATION ON VIBRATION RESPONSE OF PIPING SYSTEM. [Final Year Project] (Submitted)

Danarajan, Puvaneswari (2021) Response Surface Methodology and Optimization of Crumb Rubber Concrete Containing Silica Fume. [Final Year Project] (Submitted)

Dr Safiuddin, Shabbir (2021) THE REMOVAL OF PESTICIDE ATRAZINE FROM WASTEWATER BY FACTORY TEA WASTE THROUGH BIOSORPTION. [Final Year Project] (Submitted)

Dzulkifli, Irdina (2021) STRUCTURAL INTEGRITY ASSESSMENT OF THE REVETMENT AT CORAL BEACH, PANGKOR ISLAND. [Final Year Project] (Submitted)

E

EDDIE HIRAWAN, DAYANA (2021) EXPERIMENTAL STUDY ON BOND BEHAVIOR BETWEEN REBAR AND ENGINEERED GEOPOLYMER COMPOSITE: BAR DIAMETER EFFECT. [Final Year Project] (Submitted)

EDDY LIMBANG, ANDERSON MARCELLINUS (2021) CRUDE OIL DISPERSION EFFECTIVENESS USING GREEN DISPERSANT: RSM OPTIMIZATION OF ENVIRONMENTAL FACTORS. [Final Year Project] (Submitted)

EJAZ, MUHAMMAD MUDASSIR (2021) AUTONOMOUS VISUAL NAVIGATION AND COLLISION-FREE STRATEGY USING DEEP REINFORCEMENT LEARNING. Masters thesis, Universiti Teknologi PETRONAS.

ELANCHELIAN, JENANY (2021) THE REMOVAL OF NON-STEROIDAL ANTI-INFLAMMATORY DRUG (NSAIDs) IN AQUEOUS EFFLUENT. [Final Year Project] (Submitted)

Elavarasu, Vinoshan (2021) Effect Of Tungsten Carbide Tool On The Mechanical Properties Of Friction Stir Lap Welded Aluminium And Stainless Steel Alloy. [Final Year Project] (Submitted)

F

FAKHRULDIN, AFEEFAH (2021) UPGRADING OF HEAVY NAPHTHA TO GASOLINE-LIKE LIQUID USING Fe AND Zn SUPPORTED ZEOLITE CATALYSTS. Masters thesis, Universiti Teknologi PETRONAS.

FAZAL MOHAMED, MOHAMED LUTFI HAKIM (2021) EFFECT OF PH ON THERMAL STABILITY AND RHEOLOGICAL PROPERTIES ANALYSIS OF HBN WBDF AFTER HOT ROLLING. [Final Year Project] (Submitted)

FEROZE, HATEEM (2021) BIODIESEL PURIFICATION BY SOLVENT-AIDED CRYSTALLIZATION USING n-HEXANE AS SOLVENT. [Final Year Project] (Submitted)

FOO, ZHE RUI (2021) FABRICATION OF SUPPORTED HOLLOW FIBER MEMBRANE FOR SEAWATER DESALINATION USING VACUUM MEMBRANE DISTILLATION. [Final Year Project] (Submitted)

Fadzil Akhma, Amera Natasya (2021) Impact of Monoethanolamine (MEA) on Organic Removals in an Activated Sludge System. [Final Year Project] (Submitted)

Farhan, Faridul Hakim (2021) Using Natural Language Processing to Analyse the Musical Lyric Decency of Malaysia’s Top Hit Songs. [Final Year Project] (Submitted)

Fazley, Nurul Eleyna (2021) SIMULATION OF FATIGUE EFFECT IN MANAGING INTEGRITY OF FIXED OFFSHORE PLATFORMS. [Final Year Project] (Submitted)

G

GANESH, SURRYA SHOVANESH (2021) EXTRACTION OF CELLULOSE FROM BAMBOO MATERIAL. [Final Year Project] (Submitted)

GILL, PAVENJEET KAUR (2021) TOXICITY ANALYSIS OF IONIC LIQUIDS TOWARDS VIBRIO FISCHERI USING QSAR. [Final Year Project] (Submitted)

GIMBUTAR@JUDE, STEVE (2021) ADSORPTION MECHANISMS OF VISCOELASTIC SURFACTANTS ONTO SOLID SURFACES; PORE SCALE STUDY. [Final Year Project] (Submitted)

GOVINDASAMY, MAHA LETCHUMY (2021) MODELING AND DESIGN OF OSMOTIC POWER PLANT: AN INVESTIGATION ON OPERATING FACTORS. [Final Year Project] (Submitted)

Ganesan, Kogulan (2021) The Effects of Metal Organic Framework (MOF) On Thermal Performance of Intumescent Fire-Retardant Coating. [Final Year Project] (Submitted)

Ghazali, Ahmad Farhan Izzuddin (2021) Evaluation of Cathodic Protection Potential Criteria for Stainless Steel and Carbon Steel Couple in Seawater Environment. [Final Year Project] (Submitted)

Ghazali, Ahmad Farhan Izzuddin (2021) Evaluation of Cathodic Protection Potential Criteria for Stainless Steel and Carbon Steel Couple in Seawater Environment. [Final Year Project] (Submitted)

Ghazali, Nur Ajwa (2021) Study of Preferential Weld Corrosion in Carbon Dioxide Environment with Flowing Conditions. [Final Year Project] (Submitted)

Ghumman, Ali Shaan Manzoor (2021) Inverse Vulcanization of Copolymers for Slow-Release Urea Fertilizers: Synthesis, Performance Analysis and Regression Modelling. Masters thesis, Universiti Teknologi PETRONAS.

H

HABEEB, NURSYAHIRA (2021) IMPACT OF DEBRIS FLOW INTENSITIES ON PIPELINE. [Final Year Project] (Submitted)

HABIBUL RASHIDI, HABIBUL AQIL (2021) FAULT DETECTION IN ACID GAS REMOVAL UNIT (AGRU) SYSTEM. [Final Year Project] (Submitted)

HAFEEZ, YASIR (2021) ENHANCED NEUROFEEDBACK CONTENT TO IMPROVE THE TRAINING EFFICACY FOR STRESS MITIGATION. Doctoral thesis, UNSPECIFIED.

HAIZAL, MUHAMMAD ANWAR (2021) PROCESS MODELLING AND ECONOMIC ANALYSIS OF IONIC LIQUID@METAL ORGANIC FRAMEWORK. [Final Year Project] (Submitted)

HAMDI AL-HAKEEM, SINAN SALMAN (2021) EXPERIMENTAL INVESTIGATION ON NATURAL POLYMER GRAFTED SINGLE AND HYBRID NANOPARTICLES BASED NANOFLUIDS FOR ENHANCED OIL RECOVERY. Doctoral thesis, UNSPECIFIED.

HAMIN, ABDUL RAZAK (2021) THE STUDY OF EFFECT OF DIFFERENT SURFACTANTS TOWARD OIL RECOVERY IN CARBONATE RESERVOIR. [Final Year Project] (Submitted)

HAMZAH, MUHAMMAD FIKRI (2021) SIMULATION STUDY OF A TWO-STAGE LIQUEFACTION PROCESS FOR LNG PRODUCTION. [Final Year Project] (Submitted)

HAMZAH, MOHAMAD NASHRIQ (2021) CHARACTERIZATION OF AA6061/ GRAPHITE COMPOSITES FOR ENHANCED MECHANICAL PROPERTIES USING MULTI-PASS FRICTION STIR PROCESSING. [Final Year Project] (Submitted)

HANAFI, AHMAD HAZIM (2021) DEVELOPMENT OF PROBABILISTIC MODEL TO PREDICT CONSEQUENCES DUE TO VIBRATION RISK OF HYDROCRACKER COMPRESSOR (K-31203 E). [Final Year Project] (Submitted)

HANEEF, TAHIR (2021) REMOVAL OF POLYCYCLIC AROMATIC HYDROCARBONS AND CHEMICAL OXYGEN DEMAND FROM PRODUCED WATER USING NANOSCALE ZERO-VALENT IRON AND FERRATE (VI) OXIDATION. Masters thesis, Universiti Teknologi PETRONAS.

HARBHAJAN SINGH, ALWINJEET SINGH (2021) ANALYZE THE ACCURACY AND PRECISION OF SLIP-ON SPROCKETS. [Final Year Project] (Submitted)

HARUNA, ABDULRAHMAN (2021) DEVELOPMENT OF MULTI CRITERIA APPROACH AND GRAPHICAL USER INTERFACE FOR LOW EMBODIED ENERGY BUILDINGS. PhD. thesis, Universiti Teknologi PETRONAS.

HASHIM, MOHD HAMIZAN (2021) L-AMINO ACIDS AS ADDITIVE FOR LOW SALINITY WATER FLOODING AND THEIR SYNERGISTIC EFFECT ON THE RECOVERY PERFORMANCE OF CONVENTIONAL SURFACTANTS. [Final Year Project] (Submitted)

HASNI, NORAZIF ANUAR (2021) Geohazard-Seismic: Qualitative and Quantitative Risk Analysis based on Seismic Attribute at Bujang Field, Malay Basin. Masters thesis, Universiti Teknologi PETRONAS.

HASSAN, ALMILA (2021) MODIFICATION OF COMMERCIAL DEFOAMERS FOR EFFICIENT FOAM MITIGATION UNDER SIMULATED ENHANCED WATER-ALTERNATING GAS (EWAG) TREATMENT. Masters thesis, Universiti Teknologi PETRONAS.

HISAMUDIN, NUR ‘AINUL SYIFAA (2021) INVESTIGATION OF KEY INFLUENCING VARIABLE EFFECTING FURNACE EFFICIENCY. [Final Year Project] (Submitted)

HISHAMUDDIN, MUHAMMAD NUR FIKRI (2021) Design and Development of Fuzzy Discretization and Random Forest Framework (FDRFF) for Continuous Data in Decision Making. Masters thesis, Universiti Teknologi PETRONAS.

HO, VICENT ZHEN LEONG (2021) SYNTHESIS AND CHARACTERIZATION OF AMINE-FUNCTIONALIZED AlPO-18/POLYSULFONE MIXED MATRIX MEMBRANE. [Final Year Project] (Submitted)

HOE, ONG YIN (2021) LOAD TRANSFER BEHAVIOUR OF BORED PILE IN TROPICAL SOILS AND ROCKS. PhD. thesis, Universiti Teknologi PETRONAS.

HOSSAIN, TOUHID MOHAMMAD (2021) RULE BASED MACHINE LEARNING FOR EXPLAINABILITY OF RESULTS IN COMPLEX LITHOLOGY CLASSIFICATION. Masters thesis, Universiti Teknologi PETRONAS.

HUSSAIN SHAH, SYED ZULFIQAR (2021) CHARACTERIZATION AND DAMAGE MODELLING OF RESIN INFUSED THERMOPLASTIC 3D FIBRE REINFORCED COMPOSITE. Doctoral thesis, UNSPECIFIED.

HUSSEIN, OMAR ASSI (2021) EXPERIMENTAL AND NUMERICAL INVESTIGATION OF HYBRID NANOFLUID WITH CORROBORATIVE CHARACTERISTICS FOR SOLAR COLLECTOR APPLICATIONS. PhD. thesis, Universiti Teknologi PETRONAS.

Harip, Nur Zaiha Liyana (2021) Azobenzene Derivatives as Corrosion Inhibitors for Carbon Steel Corrosion in Carbon Dioxide (CO2) Saturated Sodium Chloride (NaCl). [Final Year Project] (Submitted)

Hassan, Muhammad Aqib (2021) Improvement in oxidation resistance and electrical properties of SOFCs interconnect via annealing of spinel layer. Masters thesis, Universiti Teknologi Petronas.

Hassan, Muhammad Syahiran (2021) Assessment of Straight and Bend Aluminium Alloy 6061 Pipelines Operating Under High Pressure and Temperature Condition Up to 24 Hours by Using Finite Element Analysis. [Final Year Project] (Submitted)

Hazamudin, Muhammad Hadiratul Quddus (2021) Development of Tire Pressure Monitoring System Using Vibration Energy Focusing on Electromagnetic Energy Harvester. [Final Year Project] (Submitted)

Hemman, Moshakkir (2021) Parametric Analysis of Sand Particle Erosion in Piping Elbow. [Final Year Project] (Submitted)

Hisham, Muhammad Abdullah Azmie (2021) Quantification of Mangrove Forest Cover’s Declination in Kedah via Remote Sensing and GIS. [Final Year Project] (Submitted)

I

IDOWU, NAHEEM ADEBISI (2021) Nationwide assessment of coastal sea level and shoreline dynamics in Malaysia using Geospatial Technology and Machine Learning. Masters thesis, Universiti Teknologi PETRONAS.

INDRAN, LISHETRA (2021) THE POTENTIAL OF BIO-FLOCCULANT EXTRACTION FROM CHICKEN FEATHER WASTE TO HARVEST MICROALGAE FOR BIODIESEL PRODUCTION. [Final Year Project] (Submitted)

IRWANSYAH, NADZIRAH HAZIQAH (2021) MACHINE LEARNING MODELING IN THERMODYNAMIC GAS HYDRATE INHIBITION APPLICATION. [Final Year Project] (Submitted)

ISAH, BALARABE WADA (2021) THE USE OF FIBRE BRAGG GRATING SENSOR (FBGs) FOR MEASURING THE DEFORMATION OF ROCK MATERIALS IN COMPRESSION TESTS. PhD. thesis, Universiti Teknologi PETRONAS.

ISLAM, JAHEDUL (2021) AN ENSEMBLE APPROACH OF METAHEURISTIC ALGORITHMS WITH PARABOLIC APPROXIMATION TO OPTIMIZE WELL PLACEMENT PROBLEM. Masters thesis, Universiti Teknologi PETRONAS.

ISMAIL, FAUDZIAH (2021) UTILIZATION OF SHRINKING CORE MODEL AS CO2 MODELLING SORPTION ONTO RUBBER-SEED SHELL ACTIVATED CARBON. [Final Year Project] (Submitted)

Ibrahim, Muhamad Faiz (2021) Development for Application of Malaysia License Plate Recognition (MLPR) using Convolutional Neural Network (CNN). [Final Year Project] (Submitted)

Imran, Ahmad Iqbal (2021) APPLICATIONS OF MACHINE LEARNING TO OPTIMIZE PLATE HEAT EXCHANGER PERFORMANCE. [Final Year Project] (Submitted)

Irwan, Iman Munirah (2021) 0Q (Zero Queue) Virtual Queue Management System for Banking Sector. [Final Year Project] (Submitted)

Ishak, Muhammad Nazarul Hafis (2021) Forget Me Not-Children Detection In Vehicle And Warning System Device. [Final Year Project] (Submitted)

Ismail, Danial Fitri (2021) Centralized and Real-Time Monitoring System for COVID-19 Quarantine Subject. [Final Year Project] (Submitted)

Ismail, Nur Nabilah Hidayah (2021) Impact of Monoethanolamine (MEA) on Nutrient Removal in an Activated Sludge Process. [Final Year Project] (Submitted)

J

JAGJIT SINGH, RASHWEEN KAUR (2021) OXALATE MODIFIED PYRITE AND CHITOSAN AS BIOACTIVE MATERIAL. [Final Year Project] (Submitted)

JALAL, NAS ADDILA (2021) WATER-BASED DRILLING FLUID FORMULATION USING SILICA NANOPARTICLES FOR UNCONVENTIONAL SHALE APPLICATION. [Final Year Project] (Submitted)

JAMAL, IRFAN IBRAHIM (2021) STUDY ON CEMENT-FORMATION BONDING BY USING DIFFERENT FORMATION LITHOLOGY. [Final Year Project] (Submitted)

JAMEEL, SYED MUSLIM (2021) ADAPTIVE CNN ENSEMBLE TO HANDLE CONCEPT DRIFT IN ONLINE IMAGE CLASSIFICATION. PhD. thesis, Universiti Teknologi PETRONAS.

JASBIR SINGH, ARVINDERPAL SINGH GILL (2021) EVALUATING THE IMPACT OF OIL PRICES AND GDP ON IBS LABOUR WAGES AND DEVELOPING A REGRESSION MODEL. [Final Year Project] (Submitted)

JAWED, SOYIBA (2021) DEEP LEARNING-BASED ASSESSMENT MODEL FOR IDENTIFICATION OF VISUAL LEARNING STYLE USING RAW EEG SIGNALS. Doctoral thesis, UNSPECIFIED.

JAYA SAGRA, DANEESHA (2021) INVESTIGATION OF BARITE SAGGING IN MUD STABILITY. [Final Year Project] (Submitted)

JAYAGOBI, MATHANRAJ (2021) THE EFFECT OF JATROPHA BASED BLEND FOR DUAL INHIBITION APPLICATION. [Final Year Project] (Submitted)

JAYASANDRAN, SAHANAGESEE (2021) THE INFLUENCE OF NUMBER OF LAYERS OF CFRP ON THE STRENGTH OF HIGH-PERFORMANCE CONCRETE FILLED DOUBLE SKIN STEEL TUBE BEAMS. [Final Year Project] (Submitted)

JIN JAAFAR, MOHAMAD SYAFIQ (2021) THE EFFECT OF SALINITY TOWARDS CRITICAL MICELLE CONCENTRATION OF LIGNIN-BASED SURFACTANT IN INTERFACIAL TENSION REDUCTION BETWEEN DISPLACING BRINE AND DECANE. [Final Year Project] (Submitted)

JOAO MESSO, JOSE FRANCISCO (2021) SIMULATION OF POLYMER FLOODING IN FRACTURED RESERVOIR USING TNAVIGATOR. [Final Year Project] (Submitted)

JOHARI, MUHAMMAD ADWA (2021) WOMAN CAREER IN CONSTRUCTION INDUSTRY AFTER INDUSTRIAL REVOLUTION 4.0 NORM. [Final Year Project] (Submitted)

JOHN JAYABALAN, PRASENNA (2021) Photodegradation of Diclofenac in Aqueous Solution using Visible Light driven TiO2/g-C3N4. Masters thesis, Universiti Teknologi PETRONAS.

JONIT, NADIA SYAZANA (2021) Experimental Investigation on the Flexural Behaviour of Sandwich Sections Utilising Engineered Geopolymer Composites. [Final Year Project] (Submitted)

Jaimon, Jc Jcy (2021) FEASIBILITY OF UTILIZING HYDROPHILIC MEMBRANE AIR DIFFUSER FOR ALGAE CULTIVATION. [Final Year Project] (Submitted)

Jaleel Faiyaz Ahmed, Allif Imran (2021) Effect of Coconut Fibre on Strength Properties of Fibre-Reinforced Concrete (FRC). [Final Year Project] (Submitted)

Jamaludin, Nur Diana (2021) Prediction on Digital Addiction among Undergraduate Students during Pandemic using Machine Learning. [Final Year Project] (Submitted)

Jamian, Nur Aina Syaqinah (2021) GIS For Landslides Susceptibility Modelling Using Fuzzy Analytic Hierarchy Process (F-AHP). [Final Year Project] (Submitted)

Jan, Amin (2021) The Nexus of Sustainability Practices and Financial Performance in the Islamic Banking Industry of Malaysia: The Moderating Role of Islamic Corporate Governance. PhD. thesis, Universit Teknologi PETRONAS.

Jannet Yong, Siaw Tze (2021) Acylated Amino acids for enhanced oil recovery: Interfacial properties, wettability alteration, and recovery potential. [Final Year Project] (Submitted)

Jassandi, Muhammad Syahmi (2021) An evaluation of IEC 61131-3 Ladder diagram and Sequential function chart languages as PLC programming approach for automation system. [Final Year Project] (Submitted)

Jaya Kumar, Jaya Vicknessvar (2021) VEP and ERP measurement for Amplitude and Latency in one Metric. [Final Year Project] (Submitted)

Jeyaseelan, Deertanan (2021) Preliminary Study on the Synthesis of Silica Dioxide Using CoconutFibre Ash(CFA). [Final Year Project] (Submitted)

Jia Pei, Jessica Chong (2021) TECHNO-ECONOMIC ANALYSIS OF IONIC LIQUID FOR HYDROGEN PRODUCTION VIA WATER ELECTROLYSIS. [Final Year Project] (Submitted)

Jin Mei, Teoh (2021) Pet Charity Mobile Application. [Final Year Project] (Submitted)

Johari, Nurhameezah (2021) Application of Modified Activated Carbon for Adsorption of Micropollutants in Wastewater. [Final Year Project] (Submitted)

Junaidi, Muhammad Fadhlan (2021) Edu4UX: Mobile Application for Year 6 Students to learn science based on UX Model. [Final Year Project] (Submitted)

Justtin, Joan Rhona (2021) THE COMPARISON ON THE EFFECT OF ACTIVITY SPACE (EUCLIDIAN DISTANCE METHOD) ON HEALTH PERFORMANCE (PHYSICAL HEALTH AND MENTAL HEALTH) BETWEEN MALAYSIA CITY AND INDONESIA CITY. [Final Year Project] (Submitted)

K

K GNANASEGARAN, KAVIN RAJ NAIDU (2021) DEVELOPMENT OF NI-BASED CATALYSTS FOR SYNGAS PRODUCTION. [Final Year Project] (Submitted)

KABIR, A K M SAROWER (2021) INTUMESCENT COATING INFLUENCE ON DRILLED HOLE INTEGRITY OF GLASS-CARBON HYBRID EPOXY COMPOSITE. Masters thesis, Universiti Teknologi PETRONAS.

KAMALUDDIN, AHMAD KAMAL (2021) CONDUCTIVITY STUDY ON METHYLIMIDAZOLIUM TRIFLUOROACETATE AND METHYLIMIDAZOLIUM TRIFLUOROMETHANESULFONATE PROTIC IONIC LIQUIDS FOR FUEL CELL APPLICATION. [Final Year Project] (Submitted)

KAMAR, MOHD ADIB FIKRI (2021) Sign Language Learning Web Application. [Final Year Project] (Submitted)

KAMARUDDIN, BASHARIAH (2021) AN INTEGRATED FRAMEWORK FOR CONTROL VALVE STICTION DETECTION AND SEVERITY QUANTIFICATION USING BUTTERFLY SHAPE-BASED METHOD. PhD. thesis, Universiti Teknologi PETRONAS.

KAMARUL AZMAN, MUHAMMAD HAKIM (2021) PARAMETRIC INVESTIGATION OF HPAM/GO-SIO2 THROUGH EXPERIMENTAL AND MACHINE LEARNING MODELING. [Final Year Project] (Submitted)

KASHIM, MUHAMMAD ZUHAILI (2021) EVALUATING THE EFFECT OF SALINITY, PRESSURE AND TEMPERATURE ON CO2-WATER-ROCK REACTION IN BASALT. Masters thesis, Universiti Teknologi PETRONAS.

KASIMIN, NICK MITCHEALL (2021) EXTRACTION OF FATTY ACID METHYL ESTERS (FAME) FROM WASTE COOKING OIL AS POTENTIAL FLOW IMPROVER. [Final Year Project] (Submitted)

KAUR, KIRANJEET (2021) A DEVELOPMENT OF USER EXPERIENCE (UX) GUIDELINE FOR CHILDREN EDUCATIONAL MOBILE APPLICATION. Masters thesis, Universiti Teknologi PETRONAS.

KHAIDZIR, SAKINAH (2021) Naphthenic acid removal from crude oil by liquid-liquid extraction using ionic liquids. Masters thesis, Universiti Teknologi PETRONAS.

KHALID, KHALID SAAD (2021) A REVIEW OF NATURAL FRACTURE SYSTEM AND PORE THROAT SIZE CLASSIFICATION IN CORE SAMPLES OF CARBONATE AND SANDSTONE RESERVOIRS USING 60-KPSI -MICP SYSTEM. [Final Year Project] (Submitted)

KINEBER, AHMED FAROUK ELSAYED (2021) Value Management Implementation Model for Construction Projects in Developing Countries. PhD. thesis, Universiti Teknologi PETRONAS.

KOI, ZI KANG (2021) Prediction of Viscosity and Ionic Conductivity of Imidazolium-Based Ionic Liquids at Different Temperatures Using a Quantitative Structure-Property Relationship Approach. Masters thesis, Universiti Teknologi PETRONAS.

KOK, CLARICE HUI YI (2021) Anaerobic and Aerobic Treatment of Chicken Manure: Biogas and Compost Production, Kinetic Study and Flies Alleviation Test. Masters thesis, Universiti Teknologi PETRONAS.

KONSUNG, DAVELIANY (2021) EFFECT OF ANIONIC SURFACTANTS IN SLICKWATER ON WATER BLOCKAGE IN GAS SHALE RESERVOIR. [Final Year Project] (Submitted)

KRISHNA, SHWETANK (2021) EXPERIMENTAL INVESTIGATION AND MODELLING OF SURGE/SWAB PRESSURE FOR NON-NEWTONIAN FLUIDS. PhD. thesis, Universiti Teknologi PETRONAS.

KUMAR, RAHUL (2021) HIGH STEP-UP SWITCHED Z-SOURCE DC-DC CONVERTER WITH MINIMAL COMPONENTS COUNT. Masters thesis, Universiti Teknologi PETRONAS.

KUNALAN, KERISHMAA THEAVY (2021) A PERFORMANCE INVESTIGATION OF A MULTI STAGED HYDROKINETIC TURBINE FOR RIVER FLOW. [Final Year Project] (Submitted)

Kai Ying, Tan (2021) Prediction of flood in tropical region using geographic information system and multi layer perceptron neural netwrok. [Final Year Project] (Submitted)

Kamarozaman, Nur Adrina (2021) Thermal Analysis of Geothermal Piles using FLOW-3D Model. [Final Year Project] (Submitted)

Kamaruzaman, Nurul Adini (2021) Performance Analysis of Semicircular Breakwater for Wave Protection in Coastal Zones. [Final Year Project] (Submitted)

Kamil, Ernie Amira (2021) Determination of Mangrove Adequacy in Dissipating Waves along Kedah Coastline. Masters thesis, Universiti Teknologi PETRONAS.

Khairulannuar, Redhwan Ariff (2021) Replacement Model for Discrete Manufacturing Facilities Adopting Job Shop Type Production. [Final Year Project] (Submitted)

Kharuddin, Amirul Asyraf (2021) Heart Care By Diet Mobile Application. [Final Year Project] (Submitted)

Koay, Wen Xin (2021) Wave in deck loads using Lagrangian Momentum Absorption (LMA) scheme. [Final Year Project] (Submitted)

Komarudin, Aiman Hamzi (2021) Finite Element Analysis of Composite Hybrid Pipes through Ring Tests. [Final Year Project] (Submitted)

Kueh, Shao Chih (2021) Chemically Infused Scale Inhibitor Based Nanoadditives in Porous Proppants for Improved Fracture Conductivity. [Final Year Project] (Submitted)

Kulothungan, Gayathiri (2021) Characterization of Ocular Blood Flow Dysregulation Due to Carotid Artery Stenosis Using Laser Speckle Flowgraphy. [Final Year Project] (Submitted)

Kushairi, Mohammad Hisyamuddin (2021) MODELLING OF MINIMUM IGNITION TEMPERATURE OF CORN STARCH DUST USING ARTIFICIAL NEURAL NETWORK. [Final Year Project] (Submitted)

L

LAM GHAI, LIM (2021) OPTIMIZING MENTAL WORKLOAD ESTIMATION BY DETECTING BASELINE STATE USING VECTOR PHASE ANALYSIS APPROACH. Doctoral thesis, UNSPECIFIED.

LAU, JOON REI (2021) ELUCIDATION OF THE EFFECT OF DIFFERENT IMPURITIES CONCENTRATIONS ON THE FOAMING BEHAVIOUR IN METHYL DIETHANOLAMINE (MDEA) PIPERAZINE SOLVENT BLEND USED FOR CO2 ABSORPTION. [Final Year Project] (Submitted)

LAU, XIAN LING (2021) BLENDED NYLON 6,6 AND CHOLINE GLYCINATE-IONIC LIQUID FOR ADSORPTIVE NANOFIBER MEMBRANE ON THE REMOVAL OF Fe(III). [Final Year Project] (Submitted)

LAZREG, BELAZREG (2021) DEVELOPED MATHEMATICAL TOOL FOR CO2 WAG AND HYDROCARBON IMMISCIBLE WAG INCREMENTAL RECOVERY PREDICTION FOR MEDIUM TO LIGHT OIL IN UNDERSATURATED RESERVOIRS. PhD. thesis, Universiti Teknologi PETRONAS.

LEE, WEN XUAN (2021) ELUCIDATION ON THE EFFECT OF GRAPHENE OXIDE FILLER LOADINGS TOWARDS CO2/CH4 GAS SEPRATION OF PSF BASED MIXED MATRIX MEMBRANE. [Final Year Project] (Submitted)

LEONG, ZHENG YAN (2021) DIGITAL CONTROL SIMULATION AID. [Final Year Project] (Submitted)

LIEW, YI LING (2021) WATER FOOTPRINT OF OIL PALM CULTIVATION ON PEATLANDS IN SIBU, SARAWAK. [Final Year Project] (Submitted)

LOGA RAJU, SANJEEVEN (2021) Effect of Emulsifiers on Oil Base Mud. [Final Year Project] (Submitted)

LOH, LI TYNG (2021) FACTORS AFFECTING THE IMPACT OF AMMONIA INCINERATION PROCESS TO THE ENVIRONMENT. [Final Year Project] (Submitted)

LUCAS, ERVIN ARISTAR (2021) HEAT EXCHANGER PERFORMANCE PREDICTION ANALYTICS. [Final Year Project] (Submitted)

LYE, HUI LI (2021) BOND STUDIES OF CFRP STRENGTHENED STEEL PLATES EXPOSED TO SERVICE TEMPERATURE. Masters thesis, Universiti Teknologi PETRONAS.

Lam, Yik Foo (2021) Preparation and Assessment of Natural Coagulant (Dillenia Indica) in Water Treatment. [Final Year Project] (Submitted)

Lee, Zhe Kaai (2021) STUDY ON HEAT CAPACITY AND THERMAL PERFORMANCE OF HYBRID NANOFLUID. [Final Year Project] (Submitted)

Liew, Zhi Bin (2021) Study of Rooftop Hybrid Solar Wind Renewable Energy Applications for East Coast of Peninsular Malaysia. [Final Year Project] (Submitted)

M

M MATHIVANAN, AKILA (2021) EFFECTIVENESS OF ULTRA SONICATION ON GRAPHENE CHARACTERIZATION IN WATER BASED DRILLING FLUID (WBDF) AT ELEVATED TEMPERATURE. [Final Year Project] (Submitted)

MACIA, IVANDER NELSON (2021) FRAMEWORK FOR SUCCESSFUL COMPLETION OF SUSTAINABLE CONSTRUCTION PROJECTS. [Final Year Project] (Submitted)

MADSOM, AMIER NURHAKEEM (2021) THE EFFECT OF ION COMPOSITION ON METHANE HYDRATE FORMATION: A CRITICAL LITERATURE REVIEW. [Final Year Project] (Submitted)

MAHAT, SITI QURRATU' AINI (2021) INVESTIGATION ON PERFORMANCE OF CATIONIC-ANIONIC SCALE INHIBITORS ON FORMATION OF SILICATE SCALE. Doctoral thesis, UNSPECIFIED.

MAHMUD, ABDULLAHI (2021) SYNTHESIS OF POLY (OCTANEDIOL CITRATE) BASED NANO SILICA COMPOSITE FOR BIOMEDICAL APPLICATION. PhD. thesis, Universiti Teknologi PETRONAS.

MAHMUD, MUHAMMAD NABIL AHNAF (2021) COATING PERFORMANCE UNDER EXCESSIVE CATHODIC POLARIZATION. [Final Year Project] (Submitted)

MAHMUD, SHAZRULHISHAM (2021) THE EFFECTS OF SOCIO-DEMOGRAHIC ON AFFECTIVE WELL-BEING DURING COVID-19 PANDEMIC. [Final Year Project] (Submitted)

MAHRA, AMIR IRFAN (2021) SYNTHESIS OF GREEN SURFACTANT – NANOPARTICLE MIXTURE FOR ENHANCED OIL RECOVERY (EOR). [Final Year Project] (Submitted)

MAJDI, AMIR MUSTAQIM (2021) VELOCITY MODEL BUILDING OF COMPLEX STRUCTURE USING DEEP LEARNING: APPLICATION OF FINITE DIFFERENCE ALGORITHM IN FORWARD MODELING. Masters thesis, Universiti Teknologi PETRONAS.

MANAN, FATIN SHAHIRAH (2021) GEOCHEMICAL, DOLOMITIZATION AND THE IMPACT ON PETROPHYSICAL PROPERTIES OF CARBONATE ROCKS IN KINTA LIMESTONE. Masters thesis, Universiti Teknologi Petronas.

MANOGARAN, M.DEVENDRAN (2021) Performance Evaluation of Diallyl Disulfide (DADS) as a Soil Urease Inhibitor. Masters thesis, Universiti Teknologi PETRONAS.

MANZOOR GHUMMAN, ALI SHAAN (2021) INVERSE VULCANIZATION OF COPOLYMERS FOR SLOW-RELEASE UREA FERTILIZERS: SYNTHESIS, PERFORMANCE ANALYSIS AND REGRESSION MODELLING. Masters thesis, Universiti Teknologi PETRONAS.

MARDANI, DANIALNAEEM EMIRZAN (2021) CRYSTAL STRUCTURE, VIBRATIONAL SPECTROSCOPY AND IONIC CONDUCTIVITY OF IONIC LIQUID@METAL-ORGANIC FRAMEWORK. [Final Year Project] (Submitted)

MARMAN, MUHAMMAD NAZRI (2021) SURFACE ROUGHNESS EFFECT TO DISPLACEMENT PATTERN OF FOAM FLOODING. [Final Year Project] (Submitted)

MAT AKHIR, SITI HAJAR (2021) IMPACT OF ROCK ANISOTROPY ON WELLBORE STABILITY ANALYSIS. [Final Year Project] (Submitted)

MAT EZAM, EAINA NAHRISHA (2021) PURIFICATION OF BIODIESEL PRODUCED FROM TRANSESTERIFICATION OF SLUDGE PALM OIL WITH METHANOL OR ETHANOL SOLVENT USING DIFFERENT CATALYSTS. [Final Year Project] (Submitted)

MAT GHANI, SITI MUSLIHA (2021) SYNTHESIS AND OPTIMIZATION OF FLY ASH-GRAFTED-POLY(VINYL ALCOHOL/ACRYLIC ACID-CO-METHYL METHACRYLATE) COMPOSITE HYDROGEL AS ANTI-BIOFOULING COATING. Masters thesis, Universiti Teknologi PETRONAS.

MAT SHAYUTI, MUHAMMAD SHAFIQ (2021) MECHANISM OF CRUDE OIL REMOVAL FROM SAND USING ULTRASONIC ENERGY. Doctoral thesis, UNSPECIFIED.

MAT YAAKOB, SARINI (2021) PERFORMANCE EVALUATIONS OF GLASS FIBER REINFORCED GEOPOLYMER COMPOSITES AS COATING FOR CARBON STEEL PROTECTION FROM CORROSION. Doctoral thesis, UNSPECIFIED.

MAT ZAKI, MUHAMMAD FARIS DANIAL (2021) EXPERIMENTATION OF THE EFFECT OF AGITATION SPEED AND DROPLET SIZE ON THE RHEOLOGICAL BEHAVIOUR OF EMULSIFIED ACID. [Final Year Project] (Submitted)

MATHIALAGAN, RANITHA (2021) A STUDY ON ALLICIN AS BIOINHIBITOR OF UREA HYDROLYSIS FOR UREA FERTILIZER EFFICIENCY. PhD. thesis, Universiti Teknologi PETRONAS.

MAZLAN, MUHAMMAD ARIF IZZUDDIN (2021) SYNTHESIS, CHARACTERISATION AND SWELLING BEHAVIORS OF DIETHANOLAMINE (DEA) INFUSED POLYMER HYDROGELS. [Final Year Project] (Submitted)

MAZLAN, NISHA FAIRUZ (2021) THE INFLUENCE OF PROCESSING PARAMETERS ON THE FORMATION OF SILICON DIOXIDE FROM RICE HUSK. [Final Year Project] (Submitted)

MAZLAN, NORHIDAYAH (2021) INVESTIGATION OF TRANSPORT PROPERTIES OF 6FDADURENE POLYMERIC MEMBRANE FOR LANDFILL GAS APPLICATION USING MOLECULAR SIMULATION APPROACH. [Final Year Project] (Submitted)

MAZUKI, NOR MARZIDA (2021) STEAM NETWORK MODELLING AND OPTIMIZATION STUDY. [Final Year Project] (Submitted)

MAZUNI, MUHAMMAD FARITH (2021) SYNTHESIS OF PREFORMED PARTICLE GEL FOR WATER SHUT-OFF APPLICATION. [Final Year Project] (Submitted)

MD ASRI, NUR ASYIMAH (2021) EVALUATION OF DEEP EUTECTIC SOLVENT IONIC LIQUID AS ADDITIVE FOR FOAM STABILITY ENHANCEMENT IN OIL RECOVERY. Masters thesis, Universiti Teknologi PETRONAS.

MD ESA, MAS EZZATY NASUHA (2021) STUDY ON THE EFFECT OF PARTICLE SIZE ON PRODUCTION OF RUBBER-SEED SHELL ACTIVATED CARBON FOR REMOVAL OF CO2. [Final Year Project] (Submitted)

MD HAFIZ, MOHAMMAD FAKHUMA UBAIDILLAH (2021) FEASIBILITY STUDY OF TREATING CHEMICAL FERTILIZER WASTEWATER USING BENCH SCALE EXTENDED AERATION ACTIVATED SLUDGE SYSTEM. Masters thesis, Universiti Teknologi PETRONAS.

MD NAZRI, MUHAMMAD FIKRI (2021) ENERGY COMPARISON USING DIFFERENT TYPES OF SCHEDULED WASTE TREATMENT. [Final Year Project] (Submitted)

MD SAAD, NUR AMIRAH IZZATI (2021) LIFE CYCLE ENERGY ASSESSMENT IN A SIMULATED GROUP III BASE OIL PRODUCTION REFINERY PLANT. [Final Year Project] (In Press)

MD TAUFIK, MOHAMAD NUR FIKRI (2021) EFFECT OF AEROGEL LOADING ON THE IONIC CONDUCTIVITY OF POLYSTYRENE/ETHYL CELLULOSE BASED POLYMER ELECTROLYTE. [Final Year Project] (Submitted)

MD YUSOF, MUHAMMAD ASLAM (2021) EXPERIMENTAL STUDY AND MODELLING OF CO2 INJECTIVITY IMPAIRMENT BY SALT PRECIPITATION AND FINES MIGRATION. Doctoral thesis, UNSPECIFIED.

MEMON, ABDUL MUHAIMIN (2021) CHEMICAL, RHEOLOGICAL AND MORPHOLOGICAL PROPERTIES OF BITUMEN INCORPORATING PETROLEUM SLUDGE. Masters thesis, Universiti Teknologi PETRONAS.

MHD SHOFI, FATIN NABILAH (2021) KINETICS STUDY OF PHYTOREMEDIATION PROCESS OF ETHYLENE DICHLORIDE CONTAMINATED GROUNDWATER. [Final Year Project] (Submitted)

MISHRA, KSHITIZ (2021) HOLE CLEANING EFFECT OF BENTONITE AND CALCIUM CARBONATE IN WATER-BASED MUD. [Final Year Project] (Submitted)

MNOCARAN, YUNESYA PREM (2021) PHOTOCATALYTIC HYDROGEN PRODUCTION BY NANOMATERIALS UNDER VISIBLE LIGHT. [Final Year Project] (Submitted)

MOHAMAD, NURDEANNA (2021) PID COMPENSATION METHOD FOR OSCILLATION CAUSED BY CONTROL VALVE STICTION. [Final Year Project] (Submitted)

MOHAMAD GHANI, MUHAMMAD FAIZ (2021) ALTERNATIVE ALKALI-SURFACTANT-POLYMER (ASP) FORMULATION FOR ENHANCED OIL RECOVERY IN SANDSTONE RESERVOIR. [Final Year Project] (Submitted)

MOHAMAD JAMEL BASHA, MOHD HAFIF BASHA (2021) INVESTIGATION OF DOWNDRAFT CO-GASIFICATION OF PALM KERNEL SHELL AND POLYSTYRENE WITH AIR AS THE GASIFYING AGENT FOR PRODUCTION OF SYNTHESIS GAS. Doctoral thesis, UNSPECIFIED.

MOHAMAD NOOR, MOHD ZULKIFLI (2021) STUDY ON THE EFFECT OF NANOPARTICLES ON THE RESISTIVITY OF POROUS MEDIUM CONTAINING TWO-PHASE FLUID. PhD. thesis, Universiti Teknologi PETRONAS.

MOHAMAD NOR, LUQMAN HAKIM (2021) IMMERSION OF NYLON 6,6 NFM WITH CHOLINE GLYCINATE-IONIC LIQUID FOR Fe(III) REMOVAL. [Final Year Project] (Submitted)

MOHAMAD RAMZI, MOHD. LUQMAN AIDIL (2021) CRITICAL REVIEW ON THE EFFECT OF GAS INJECTION ON RESTART PRESSURE OF WAXY CRUDE OIL PIPELINE. [Final Year Project] (Submitted)

MOHAMAD RAZIP, MARYM (2021) A Sustainable Household IoT E-waste Management Guideline in Malaysia. Masters thesis, Universiti Teknologi PETRONAS.

MOHAMAD YUSOFF, DAUD NAQIB (2021) MACHINE LEARNING OF HEAT EXCHANGER PERFORMANCE. [Final Year Project] (Submitted)

MOHAMED, ABDIRAHMAN HASSAN (2021) MODELLING FLUID PHASE DISTRIBUTION AND FLUID-FLUID INTERFACIAL AREA IN TWO-PHASE FLOW IN POROUS MEDIA. [Final Year Project] (Submitted)

MOHAMED ANUAR, MUHAMMAD ATHIR (2021) RECOVERY OF RESIDUAL CRUDE PALM OIL FROM PALM OIL MILL EFFLUENT THROUGH PROGRESSIVE FREEZING. Masters thesis, Universiti Teknologi PETRONAS.

MOHAMED HANIF, AIMAL ‘AQILLAH (2021) CHARACTERISATION OF ACTIVATED CARBON-ZEOLITE OMPOSITE DERIVED FROM KENAF AND FLY ASH. [Final Year Project] (Submitted)

MOHAMED HANIFFA, MUHAMAD HILMI (2021) WEB APPLICATION SIGN LANGUAGE TRANSLATOR. [Final Year Project] (Submitted)

MOHAMED KHAIR, WALAA ELNASIR IBRAHIM (2021) MINERALOGICAL, GEOCHEMICAL AND PETROPHYSICAL CHARACTERIZATION OF SHALES AND MUDSTONES OF CENTRAL SARAWAK, MALAYSIA. PhD. thesis, Universiti Teknologi PETRONAS.

MOHAMED RASHIDI, NUR AMIRAH (2021) Mixing Profile of Nitrogen and Hydrogen Gases in Monolithic Channel through Computational Fluid Dynamics. Masters thesis, Universiti Teknologi PETRONAS.

MOHAMED RIMSAN, MOHAMED MOHIDEEN (2021) A MODEL OF BLOCKCHAIN TECHNOLOGY IN PAYMENT SETTLEMENT IN ENERGY SUPPLY INDUSTRY. Masters thesis, Universiti Teknologi PETRONAS.

MOHAMED SHAJAHAN, MOHAMED AZMAN (2021) COST ANALYSIS STUDY OF MIXED MATRIX MEMBRANES FOR CO2/CH4 GAS SEPARATION. [Final Year Project] (Submitted)

MOHAMMAD AZIZI, AINA MAISARAH (2021) HYDROGEL PRODUCTION FROM EXTRACTED CELLULOSE OF NAPIER PAKCHONG, NAPIER INDIA, AND NAPIER KOBE. [Final Year Project] (Submitted)

MOHAMMAD AZMI, MOHAMMAD AKMAL (2021) ANALYSING THE EFFECT OF HTHP, MONOVALENT CATION MOLALITY AND DIVALENT CATION MOLALITY ON IFT MEASUREMENTS BASED ON BRINE/CO2 SYSTEM. [Final Year Project] (Submitted)

MOHAMMAD YUSOF, MUHAMMAD SYAFIQ (2021) UPGRADING FULL-SCALE MEMBRANE BIOREACTOR FOR TREATMENT OF FOOD INDUSTRIAL WASTEWATER. [Final Year Project] (Submitted)

MOHAMMED HASSAN, ANAS (2021) A NOVEL HYBRID ENHANCED OIL RECOVERY METHOD BY SMART WATER ASSISTED FOAM (SWAF)-FLOODING IN CARBONATE RESERVOIRS. Doctoral thesis, UNSPECIFIED.

MOHANARAJU, HARESH (2021) INVESTIGATION OF GAS HYDRATE FORMATION IN A 60° PIPE ELBOW USING COMPUTATIONAL FLUID DYNAMICS. [Final Year Project] (Submitted)

MOHD AFFENDY, FATIN FARZANA (2021) POLYMER INJECTIVITY EFFECT TO OIL RECOVERY IN NATURALLY FRACTURED RESERVOIR. [Final Year Project] (Submitted)

MOHD AMERUDIN, MUHAMMAD AMIR ARIF (2021) OPTIMISATION OF POLYMER IN THE SULFUR/CONDUCTIVE POLYMER COMPOSITE AS POTENTIAL CATHODE IN LITHIUM-SULFUR BATTERY. [Final Year Project] (Submitted)

MOHD FADZIL, FIRDAUS HAFIZUDDIN (2021) INVESTIGATION OF SAPONIN AS WETTABILITY ALTERATION AGENT. [Final Year Project] (Submitted)

MOHD FARID, MOHD FIKRI AMRI (2021) COMPARISON OF PREDICTIVE MODEL FOR RELATIVE PERMEABILITY OF CO2 AND CH4 GAS IN MATRIMID® 5218-CMS MIXED MATRIX MEMBRANE. [Final Year Project] (Submitted)

MOHD FARIDZ HILMY, NURFATHIAH IZZATY (2021) Development of Eutectic Ionic Liquids as an Electrolyte in Dye-Sensitized Solar Cells (DSSCs). Masters thesis, Universiti Teknologi PETRONAS.

MOHD FIRDAUS, NUR FATIN NADHIRAH (2021) PYROLYSIS OF DIFFERENT FEEDSTOCK OF BAMBOO TO PRODUCE BIO-OIL. [Final Year Project] (Submitted)

MOHD FUAD, AMIRUL ADLI (2021) EFFECTS OF NON-REACTING GAS INJECTION ON RESTART PRESSURE OF WAXY CRUDE OIL PIPELINE. [Final Year Project] (Submitted)

MOHD GHANI, SITI NOFARAHHANIM (2021) TOTAL QUALITY MANAGEMENT (TQM) MODEL FOR MALAYSIAN CONSTRUCTION ORGANIZATIONS. Masters thesis, Universiti Teknologi PETRONAS.

MOHD HAFEEZ, ABDULLAH (2021) COMPARISON AND PREDICTION OF CO2 – BRINE SOLUBILITY FOR APPLICATION IN CO2 SEQUESTRATION AND EOR. [Final Year Project] (Submitted)

MOHD ISA, NUR FARIHA (2021) A MATHEMATICAL MODEL FOR ENHANCED OIL RECOVERY FACTOR USING SILICA OXIDE. Masters thesis, Universiti Teknologi PETRONAS.

MOHD KAMAL, MUHAMMAD AMIRUL AKMAL (2021) PROCESS DEVELOPMENT AND TECHNO ECONOMIC ANALYSIS FOR SEPARATION OF NI-TPP, NI-EP, VO-TPP, VO-EP FROM HEAVY OIL MODEL USING [BMIM][OS] IONIC LIQUID. [Final Year Project] (Submitted)

MOHD KAMONWEL, NURUL DIYANA (2021) ABSORPTION OF CARBON DIOXIDE IN AMINO ACID BASED IONIC LIQUID MEDIA. [Final Year Project] (Submitted)

MOHD LAZIZ, AFIQ (2021) CFD SIMULATION AND EXPERIMENTAL STUDY ON HYDRODYNAMIC BEHAVIOUR OF TRANSESTERIFICATION REACTION IN MICROCHANNEL REACTOR. PhD. thesis, Universiti Teknologi PETRONAS.

MOHD NOOR, SITI NURSYUKRINA (2021) EXPERIMENTAL INVESTIGATION ON THE ADSORPTION OF GRAPHENE NANOPLATELETS INTO SANDSTONES USING SODIUM CARBOXYMETHYL CELLULOSE. [Final Year Project] (Submitted)

MOHD NOR, MOHD AZRI (2021) ANALYSIS AND OPTIMIZATION OF HYDROCYCLONE GEOMETRY USING BOX-BEHNKEN AND MULTI-OBJECTIVE OPTIMIZATION ALGORITHM. Doctoral thesis, UNSPECIFIED.

MOHD RAZALI, NUR DINIE (2021) DENTAL AUGMENTED REALITY – AUGMENTED REALITY (AR) BASED ON DEEP LEARNING FOR DENTAL EDUCATION. [Final Year Project] (Submitted)

MOHD ROSLANI, MUHAMMAD FAKRUL IMAN (2021) DIRECT HEATED SLUDGE ASH FOR HEAVY METAL RECOVERY. [Final Year Project] (Submitted)

MOHD SAID, MUHAMMAD AFIQ AMINUDDIN (2021) EFFECTS OF GRAPHENE ON THE PROPERTIES OF ENGINEERED CEMENTITIOUS COMPOSITE. [Final Year Project] (Submitted)

MOHD SAIFUDDIN, MUHAMMAD SYAMIM (2021) Effects of Void Fractions on Vibration Behaviour of Pipe Conveying Fluids. [Final Year Project] (Submitted)

MOHD SHAFIAN, SITI ROHAIDA (2021) DEVELOPMENT OF COLLOIDAL SILICA NANOPARTICLES FOR FINES MIGRATION CONTROL. Doctoral thesis, UNSPECIFIED.

MOHD SHAFIEE, EMIR AFIF HAIKAL (2021) STUDY ON THE SULPHURIC ACID RESISTANCE OF CALCIUM ALUMINATE PHOSPHATE (CAP)-BASED OIL WELL CEMENT. [Final Year Project] (Submitted)

MOHD SHAH, MUHAMMAD FIRDAUS (2021) PHASE BEHAVIOR STUDIES OF ALPHA OLEFIN SULFONATE (AOS), LAURYL GLUCOSIDE, AND DECANE IN CREATING WINSOR TYPE-III MICROEMULSION. [Final Year Project] (Submitted)

MOHD SHUKUR, AFIKA ADIBAH YANG (2021) A REVIEW OF EXTRACTION OF LIGNIN FROM SUGARCANE BAGASSE AS GREEN FLOW IMPROVER. [Final Year Project] (Submitted)

MOHD SOM, SITI HAJAR RADHIAH (2021) ANALYSIS OF THE EFFECTS OF FLOW PATTERNS ON WAX DEPOSITION ON CRUDE OIL PIPELINE. [Final Year Project] (Submitted)

MOHD YASIN, AMMAR NAZIRUL BIN MOHD YASIN (2021) ADAPTIVE NEURAL-FUZZY INFERENCE SYSTEM (ANFIS) PREDICTION OF CARBON DIOXIDE (CO2) HYDRATE FORMATION KINETICS. [Final Year Project] (Submitted)

MOHD YASIN, MOHAMED SYAFIQ (2021) KINETIC AND DIFFUSION MODELLING OF LEAD USING MAGNETIC RICE STRAW CHAR ADSORBENT. [Final Year Project] (Submitted)

MOHD ZAILAN, KHALIDA ADEEBA (2021) Optimizing Variable Step-Size Least Mean Square Using Support Vector Machine for Motion Artifact Reduction. Masters thesis, Universiti Teknologi PETRONAS.

MOHD ZALGHANI, HAZMAN AKMAL (2021) INVESTIGATION OF THE SYNERGISM OF ORGANIC ALKALI - IONIC LIQUID COMBINATION IN ENHANCED OIL RECOVERY FOR CARBONATE RESERVOIRS. [Final Year Project] (Submitted)

MOHD ZAMRI, MUHAMMAD DANIAL HAKIM (2021) EVALUATION OF PLANT-BASED SURFACTANT AS DEMULSIFIER IN IMPROVING PRODUCED WATER QUALITY. [Final Year Project] (Submitted)

MOHMAD AZMAN, NURIN UMAIRAH (2021) PROCESS SIMULATION & DESIGN OF COOLING SYSTEM FOR EFFICIENT ENERGY UTILIZATION. [Final Year Project] (Submitted)

MOSES, NICLAS GALIH (2021) PHYSIO-CHEMICAL OF ETHYLENE-VINYL ACETATE (EVA) COPOLYMER ON BONDING ABILITY IN THE CEMENTING MATERIAL USED FOR OIL AND GAS WELL. [Final Year Project] (Submitted)

MUBARAK ALYAN, EMAD AHMED (2021) EEG-fNIRS Fusion Approach for the Measurement of Workplace Stress Related to Design and Noise. Doctoral thesis, UNSPECIFIED.

MUHAMMAD, AMIN (2021) FRONTLINE EMPLOYEE VALUE CO-CREATION BEHAVIOUR IN SERVICE INTERACTION: ROLE OF INTERACTIONAL CAPABILITIES AND MOTIVATION TO CO-CREATE. PhD. thesis, Universiti Teknologi PETRONAS.

MUHAMMAD, MUHAMMAD HAMMAD RASOOL (2021) Deep Eutectic Solvent Based Novel Drilling Mud With Improved Rheological and Filtration Behaviour. Masters thesis, Universiti Teknologi PETRONAS.

MUHAMMAD AL SUHAIMI, FARAH BATRISYIA (2021) WEB-BASED E-COMMERCE FOR VISUALLY IMPAIRED USING ARTIFICIAL INTELLIGENCE. [Final Year Project] (Submitted)

MUHAMMAD YUSRI, MUHAMMAD IRFAN (2021) EVALUATING THE POTENTIAL OF OKRA MUCILAGE FOR FLOW ASSURANCE IN PIPELINES. [Final Year Project] (Submitted)

MUHAMMED RASHIK MOJID, MUHAMMED RASHIK MOJID (2021) Investigation of Thickened Supercritical Carbon Dioxide for Waterless Fracturing of Shale Formation. Masters thesis, Universiti Teknologi PETRONAS.

MUJAHID, YASIR (2021) EFFECTS OF VACUUM-BAG-ONLY PROCESSING PARAMETERS ON SHAPE CONFORMATION, VOID CONTENT AND MECHANICAL PROPERTIES OF COMPOSITES. Masters thesis, Universiti Teknologi PETRONAS.

MUSA, NUR IZZATI (2021) STUDY ON THE EFFECT OF ZIF-8/PEBAX SURFACE COATING ON THE PERFORMANCE OF CTA-BASED HOLLOW FIBER MIXED MATRIX MEMBRANE IN CO2 REMOVAL FROM CH4. [Final Year Project] (Submitted)

MUSA, NURUL FERLIENA (2021) RELIABILITY, AVAILABILITY AND MAINTAINABILITY (RAM) ANALYSIS AND THE DEVELOPMENT OF COGENERATION PLANT RELIABILITY BLOCK DIAGRAM (RBD). [Final Year Project] (Submitted)

Maamor, Muhammad Tariq (2021) Hydrokinetic-powered Aquaponics System-A Numerical Study. [Final Year Project] (Submitted)

Manogran, Johan Suppiah (2021) Ultra-Thin Nanocomposite Layers Coated Proppant for improved Compression Strength. [Final Year Project] (Submitted)

Mansor, Mohammad Ali Hashemi (2021) The Assessment of Water Purification Using Active Solar Still. [Final Year Project] (Submitted)

Maswari, Nurul Asyiqin (2021) The Effect of Activity Space and Built Environment on Mental and Social Health Performance in Indonesia City. [Final Year Project] (Submitted)

Mazlan, Muhammad Syazwi (2021) etrophysical And Geological Evaluation Of "X" Formation, Baram Delta, Malaysia. [Final Year Project] (Submitted)

Mazli, Arwie Amri (2021) STRESS ANALYSIS OF STEEL PLATE WITH RECTANGULAR HOLES SUBJECTED TO AXIAL STRESS USING FINITE ELEMENT METHOD. [Final Year Project] (Submitted)

Mazwan, Muhammad Hakim (2021) Shear Strength Properties of Kati Sand Formation. [Final Year Project] (Submitted)

Mirza Kelana, Muhammad Hilmi (2021) FACIAL RECOGNITION AT GATED COMMUNITY. [Final Year Project] (Submitted)

Misnan, Mohd Hamizan Muqri (2021) CFD MODELLING OF MOISTURE SEPARATION IN INLINE SEPARATOR. [Final Year Project] (Submitted)

Mohamad Azmir, Azura (2021) THE EFFECT OF BRINE IONIC CONCENTRATION ON WETTABILITY ALTERATION IN SANDSTONE AND CARBONATE RESERVOIRS: AN EXPERIMENTAL STUDY. [Final Year Project] (Submitted)

Mohamad Matrol, Manaryna Rafhana (2021) Soil Erosion Susceptibility Mapping Using Machine Learning and GIS. [Final Year Project] (Submitted)

Mohamad Nasaruddin, Noradila (2021) Emotion Detection Based on EEG Signal. [Final Year Project] (Submitted)

Mohamad Shoeb, Mujana (2021) Numerical Modelling in Enhancing the Water Desalination of Active Solar Still System. [Final Year Project] (Submitted)

Mohamad Yasin, Muhammad Hilman (2021) Study of Particle Velocity Impact on The Surface of M-152 Steel and SiCp/Ti- 6Al-4V Metal Matrix Composite. [Final Year Project] (Submitted)

Mohamed Asri, Mohamad Aimran (2021) Performance Simulation of a Free Piston Linear Generator by Using MATLAB Simulink. [Final Year Project] (Submitted)

Mohamed Mansoor, Ahmed (2021) Numerical Study of Wave Groups in Wind-Swell Seas. [Final Year Project] (Submitted)

Mohamed Nurul Amin, Mohamed Izzat Haziq (2021) BIODEGRADABILITY STUDY OF INVERSE VULCANIZED COPOLYMER FROM JATROPHA OIL. [Final Year Project] (Submitted)

Mohammad, Muhammad Iqbal (2021) Compression Behaviour of Intact Sintok Marine Clay. [Final Year Project] (Submitted)

Mohammad, Muhammad Syazwan (2021) Individual Tire Mileage Measurement. [Final Year Project] (Submitted)

Mohammad Nasir, Mohammad Arash (2021) Personality Traits Recognition System. [Final Year Project] (Submitted)

Mohd Akram, Muhammad Nur Iman (2021) Study on Mechanical Properties of Silica Fume-Bitumen Emulsion Stabilized Peat. [Final Year Project] (Submitted)

Mohd Asri, Ahmad Fuad (2021) Diagnosability Evaluation of Mechanical Systems Design Using Data Analysis. [Final Year Project] (Submitted)

Mohd Asri, Muhammad Izzudin (2021) Material Flow Modelling During Friction Stir Welding (FSW) Process Using Smooth-Particle Hydrodynamics (SPH) Method. [Final Year Project] (Submitted)

Mohd Assri, Muhammad Amirul Aiman (2021) Mechanical Properties Investigation of Ti-6Al-7Nb as an Alternative Biomedical Tools. [Final Year Project] (Submitted)

Mohd Azid, Nurul Fathonah (2021) Experimental Investigation of Solar Vortex Power Generation System Integrated with Sensible Heat TES. [Final Year Project] (Submitted)

Mohd Basha, Muhamad Amir Zahiruddin (2021) AIR MONITORING SYSTEM USING WIRELESS SENSOR NETWORK. [Final Year Project] (Submitted)

Mohd Burhan, Nur Izza Natilia (2021) Analysis on The Prediction of Homeless using Machine Learning Algorithm. [Final Year Project] (Submitted)

Mohd Burhan, Muhammad Izqandar (2021) ROTOR DYNAMIC DIAGNOSTICS USING FINITE ELEMENT ANALYSIS. [Final Year Project] (Submitted)

Mohd Fadzil, Siti Nursabrina (2021) MONTSENSORY POCKET: DYSGRAPHIA CHILDREN’S LEARNING TOOL USING MOBILE APPLICATION. [Final Year Project] (Submitted)

Mohd Faudzi, Mohamad Faeesol (2021) Development of Tracking Signal for Non-homogeneous Poisson Process Model. [Final Year Project] (Submitted)

Mohd Fauzi, Muhammad Adli Hakim (2021) Nutrient Removal of Pulp Wastewater using Bench Scale Extended Aeration Activated Sludge Treatment. [Final Year Project] (Submitted)

Mohd Fuzi, Nur Hanisah (2021) Restaurant Management System for SME Restaurant. [Final Year Project] (Submitted)

Mohd Izani, Muhammad Izulfikrie (2021) Developments of Contactless Width Measurement Units. [Final Year Project] (Submitted)

Mohd Nafi, Syahmi Aiman (2021) THE EFFECT OF SOCIO-DEMOGRAPHIC ON MENTAL HEALTH DURING COVID19 PANDEMIC. [Final Year Project] (Submitted)

Mohd Nuri Al-Amin, Nu’man Al-Basyir (2021) SIMULATION TO ENHANCE PERFORMANCE OF GLOBE VALVE. [Final Year Project] (Submitted)

Mohd Ramli, Muhammad Faris (2021) ASSESSMENT OF COD REMOVAL ENHANCEMENT FOR TREATING THE INDUSTRIAL EFFLUENT USING TREATMENT TRAIN. [Final Year Project] (Submitted)

Mohd Rasdi, Aiffa Auni (2021) Challenges of Construction Companies to Implement IR 4.0 in Construction Project. [Final Year Project] (Submitted)

Mohd Saharan, Muhammad Suhaimi (2021) Using Gamification Features to Enhance Online Learning for English in Primary Schools. [Final Year Project] (Submitted)

Mohd Zambri @ Shahrin Hilmy, Fatin Anis Syakirah (2021) BIM Implementation for Safety Control in Building Project. [Final Year Project] (Submitted)

Mohd Zamri, Muhammad Adib Idzam (2021) Indoor Localization and Guidance using Augmented Reality Toolbox. [Final Year Project] (Submitted)

Mohsin, Arissa Azreen (2021) THE STUDY OF BIM ON MINIMIZING THE VIOLATION OF SAFETY RULES IN INFRASTRUCTURE PROJECT. [Final Year Project] (Submitted)

Muhammad Juffri, Muhammad (2021) CFD Investigation of Thermal Performance of the Flat Plate Solar Collector by using Vibration. [Final Year Project] (Submitted)

Murali, Mugineysh (2021) Tensile Properties of Rubberized Concrete Containing High Volume Fly Ash. [Final Year Project] (Submitted)

N

NACHIAPPAN, ROHAN (2021) A COMPARATIVE STUDY OF INHIBITORS EFFICIENCY ON CORROSION OF CARBON STEEL REBAR IN CHLORIDE ENVIRONMENT. [Final Year Project] (Submitted)

NAQVI, SYED FARAZ (2021) REAL-TIME STRESS ASSESSMENT USING SLIDING WINDOW BASED CONVOLUTIONAL NEURAL NETWORK. Masters thesis, Universiti Teknologi PETRONAS.

NASEER, HARIS (2021) PERFORMANCE ANALYSIS OF COMPOUND PARABOLIC CONCENTRATOR INTEGRATED WITH EVACUATED TUBE RECEIVER USING HYBRID NANOFLUIDS. Masters thesis, Universiti Teknologi PETRONAS.

NASHARUDDIN, MUHAMMAD AFIF FAHIMI (2021) OPTIMIZATION OF GAS TURBINE GENERATOR (GTG) AND HEAT RECOVERY STEAM GENERATOR (HRSG) USING ICON SYMMETRY PROCESS MODELLING. [Final Year Project] (Submitted)

NAWAB ALI KHAN, NUR RASHEEDAH BEGUM (2021) INVESTIGATION OF VEGETABLE OIL AS DEMULSIFIER FOR OIL-WATER EMULSION. [Final Year Project] (Submitted)

NAWAZ, RAB (2021) PHOTODEGRADATION OF PHENOLIC COMPOUNDS IN TREATED POME USING Mn-MODIFIED DEFECTIVE TiO2 PHOTOCATALYST UNDER VISIBLE LIGHT IRRADIATION. Doctoral thesis, UNSPECIFIED.

NAZARULASMAL, HARIS (2021) IONIC LIQUIDS BASED NANOEMULSIONS FOR ENHANCED CO2 CAPTURE AND SEPARATION. [Final Year Project] (Submitted)

NAZIR, MUHAMMAD HAMZA (2021) MICROWAVE IRRADIATION PROCESS FOR BIODIESEL PRODUCTION USING WASTE SUGARCANE BAGASSE DERIVED ACID ACTIVATED CATALYST. Masters thesis, Universiti Teknologi PETRONAS.

NG, CATRIONA CHOI YEANG (2021) TECHNO-ECONOMIC ANALYSIS OF LOW-PRESSURE MEMBRANE FILTRATION FOR MICROALGAE CONCENTRATION. [Final Year Project] (Submitted)

NG, JIN HUAN (2021) PROCESS SIMULATION OF OFFSHORE ACID GAS ABSORPTION FOR NATURAL GAS PURIFICATION: ENERGY AND UTILITIES COST ANALYSIS. [Final Year Project] (Submitted)

NG GUAN, SHEN (2021) SYNTHESIS OF CHAINED-ELLIPTIC FUNCTION WAVEGUIDE BANDPASS FILTER WITH HIGH REJECTION. Masters thesis, Universiti Teknologi PETRONAS.

NIK BURHANUDDIN, NIK SYAZWINA (2021) REMOVAL OF SULFUR FROM FUEL OIL USING ACIDIC-BASED DEEP EUTECTIC SOLVENT – A STATISTICAL MODELLING STUDY. [Final Year Project] (Submitted)

NOR ZAIDI, ALIYA NURZAFIRA (2021) SCREENING AND DESIGN BIOCOMPATIBLE IONIC LIQUID USING COSMO-RS FOR QUERCETIN PROCESSING IN THE FOOD INDUSTRY. [Final Year Project] (Submitted)

NORAZMISAM, MOHD AMIRUL HANIFF (2021) LIFE CYCLE ASSESSMENT OF TRIACETIN PRODUCTION FROM GLYCEROL: GATE-TO-GATE APPROACH. [Final Year Project] (Submitted)

NORDIN, EIMAN IZZUDDIN (2021) PROTOTYPE DEVELOPMENT IOT MONITORING SYSTEM BASED ON LORA TECHNOLOGY FOR PALM OIL PLANTATION. [Final Year Project] (Submitted)

NUGRAHA, MUHAMMAD WAHYU (2021) Composite of polylactic acid/tungsten oxide/amino-functionalized carbon quantum dots (PLA/WO3/N-CQDs) fibers for oil/water separation and methylene blue decolorization. Masters thesis, Universiti Teknologi PETRONAS.

NUMIN, MOHD SOFI (2021) INVESTIGATING THE MECHANISM OF ASP IN OIL-WATER INTERFACE BY MOLECULAR DYNAMICS. Masters thesis, Universiti Teknologi PETRONAS.

Nasaruddin, Nurain Zayanah binti Nasaruddin (2021) Grafted Locust Bean Gum As A Potential Natural Bio-Based Grafted Coagulant To Enhance Turbidity Removal. [Final Year Project] (Submitted)

Nazreen, Alvin Freiszuan (2021) Numerical Investigation of Diffraction Wave Force Due to Diameter Variation. [Final Year Project] (Submitted)

Nazri, Muhammad Fakhrul Ariffin (2021) COVID-19 Vaccine Scheduler for Private Hospital. [Final Year Project] (Submitted)

Neoh, Jun Yuan (2021) A NUMERICAL INVESTIGATION ON SHORT-CRESTED WAVES EFFECT FOR DIFFERENT CROSS-SECTIONAL SHAPES: CIRCULAR VS I-SECTION. [Final Year Project] (Submitted)

Ng, Hock Heng (2021) Fatigue Design and Assessment under Operating Loads of Tower Crane. [Final Year Project] (Submitted)

Nor Zaihar, Naim Zafran (2021) Non-Linear Structural Analysis of a Tensioner During Pipe Lay. [Final Year Project] (Submitted)

Nurulzahar, Farhan Adib (2021) Study of Organic Acid Corrosion for Steel Pipeline in Wet. [Final Year Project] (Submitted)

O

OBAYES, AMMAR KAREEM (2021) A HYBRID ARTIFICIAL BEE COLONY WITH PARTICLE SWARM OPTIMIZATION FOR MIXED-STRENGTH TEST SUITE GENERATION STRATEGY. PhD. thesis, Universiti Teknologi PETRONAS.

OH, XIAN BIAO (2021) ENERGY-WATER-CARBON EMISSIONS NEXUS STUDY FOR INTEGRATED ENERGY-WATER SYSTEMS. [Final Year Project] (Submitted)

OLALEKAN, SIKIRU SURAJUDEEN (2021) ELECTROMAGNETIC ADSORPTION AND POLARIZATION MECHANISM IN RESERVOIR SANDSTONE WITH NANOPARTICLE APPLICATION IN OIL RECOVERY FACTOR. Doctoral thesis, Universiti Teknologi PETRONAS.

OMAR, MADIAH (2021) LEAN BLOWOUT FAULT PREDICTION FOR DRY LOW EMISSION GAS TURBINE USING HYBRID OF SUPPORT VECTOR MACHINE AND BAYESIAN BELIEF NETWORK. PhD. thesis, Universiti Teknologi PETRONAS.

OMAR BAKRI, MOHD AIMAN IRFAN (2021) PROCESS SIMULATION OF OFFSHORE ACID GAS ABSORPTION SYSTEM FOR NATURAL GAS PURIFICATION: TONNAGE AND CAPITAL EXPENDITURE (CAPEX) ANALYSIS. [Final Year Project] (Submitted)

ONEN OCHAN JOHN, ANTHONY (2021) Characterization of Saponin as a Biosurfactant. [Final Year Project] (Submitted)

ONG, SZE KUAN (2021) STACKING SEQUENCE OPTIMIZATION OF LAMINATE COMPOSITES USING HASHIN FAILURE CRITERIA. [Final Year Project] (Submitted)

ONG, WEI HANG (2021) THE EFFECT OF PRE-TREATMENT ON THE MACROALGAE FOR POTENTIAL BIOETHANOL PRODUCTION. [Final Year Project] (Submitted)

OTHMAN, MOHAMMAD TAUFIQ (2021) TGA AND FTIR STUDIES OF RUBBER SEED SHELL ACTIVATED CARBON WITH MALIC ACID FOR HIGH CO2 ADSORPTION. [Final Year Project] (Submitted)

OTHMAN, NURUL HUSNA (2021) EPOXY COATING REINFORCED WITH GO-ZNO AS COATINGS FOR THE PROTECTION AGAINST HIGH-PRESSURE CO2 GAS ENVIRONMENT. PhD. thesis, Universiti Teknologi PETRONAS.

Obeidy, Arsh (2021) Real Time Malaysian Sign Language (MSL) Translator – Tuturjom. [Final Year Project] (Submitted)

Ong, Wei Hoong (2021) EFFECTS OF NATURAL ANTIOXIDANTS ON THE OXIDATIVE STABILITY OF WINTERIZED BIODIESEL. [Final Year Project] (Submitted)

Ong, Yee Chun (2021) Simulation of temperature effect in designing expansion joint of large shaft structures. [Final Year Project] (Submitted)

Ong, Zhen Liang (2021) Forces on Jacket Structures: Effects of Directionality and Spectral Shapes. [Final Year Project] (Submitted)

Osman, Nur Sabrina (2021) Design and Modelling of a Generator for Pico Hydropower System. [Final Year Project] (Submitted)

Othman, A’ini Sa’adah (2021) An Automated Water Sprinkler Bot. [Final Year Project] (Submitted)

Othman, Muhammad Faris (2021) Design and Implementation of an Efficient Solar Powered BLDC Motor based Water Pumping System for Pumped Hydro Storage Application. [Final Year Project] (Submitted)

P

P.Arumugam, Yogenraj (2021) Investigations on Friction Melt Bonding of Aluminium-steel lap Joints. [Final Year Project] (Submitted)

PALU, THIRUKKUMARRAN (2021) SIMULATION OF GASIFICATION PROCESS FOR OIL PALM BASED BIOMASS PELLETS USING MATLAB. [Final Year Project] (Submitted)

PARAMANATHAN, PREMI (2021) FRNDY: A WOMEN SAFETY MOBILE APPLICATION. [Final Year Project] (Submitted)

PARAMESWARAN, RUPEINHY NAIDU (2021) ADSORPTION OF METHYLENE BLUE DYE USING CORN SILK BIOMASS. [Final Year Project] (Submitted)

PATIL, NAMDEV ASHOK (2021) CHARACTERIZATION AND PARAMETER OPTIMIZATION OF FRICTION STIR PROCESSED AA7075 HYBRID SURFACE COMPOSITES. Doctoral thesis, UNSPECIFIED.

PERAMASIVAM, THILOSHINI (2021) EFFECT OF H2SO4 ON THE PHYSICOCHEMICAL PROPERTIES OF SZSBA-15 CATALYST AND ITS ACTIVITY IN ESTERIFICATION OF GLYCEROL WITH PALMITIC ACID TO MONOPALMITIN. [Final Year Project] (Submitted)

PHILIP, LISSA VANIESHA (2021) DESIGN AND EVALUATION OF EXTRACTIVE DISTILLATION PROCESS FOR SEPARATION OF CYCLOHEXANE AND BENZENE USING 1-BUTYL-3-METHYLIMIDAZOLIUM DICYANAMIDE : TECHNO-ECONOMIC ANALYSIS. [Final Year Project] (Submitted)

PHONG , GUAN MING (2021) FLY ASH NANOPARTICLES ASSITED FOAM INJECTION WATER ALTERNATING GAS FOR ENHANCED OIL RECOVERY. Masters thesis, Universiti Teknologi PETRONAS.

PONG, CHUN HUI (2021) IMPROVEMENT ON STABILITY OF BIOPESTICIDES USING FREEZE CONCENTRATION AND OZONATION. [Final Year Project] (Submitted)

PRAIM KUMAR, DAVIN KUMAR (2021) EFFECTS OF NANOPARTICLES ON POLYMER FOR ENHANCED OIL RECOVERY (EOR). [Final Year Project] (Submitted)

Padil, Syariza Fadli Ansary (2021) Development of Halloysite Nanotube As The Future Coating Inhibitor Against Corrosion. [Final Year Project] (Submitted)

Parman, Siti Nursyahirah (2021) VIRTUAL REALITY ENVIRONMENT TO MONITOR WORKPLACE STRESS. [Final Year Project] (Submitted)

Patthi, Ahmad Farid (2021) THE INFLUENCE OF COMBUSTION PROCESS PARAMETER ON THE FORMATION OF SILICA FROM OIL PALM EMPTY FRUIT BUNCH (OPEFB). [Final Year Project] (Submitted)

Q

QASEM AL-TASHI, QASEM ABDULLAH (2021) AN ENHANCED FEATURE SELECTION METHOD BASED ON GREY WOLF OPTIMIZER FOR CLASSIFICATION PROBLEMS. PhD. thesis, Universiti Teknologi PETRONAS.

R

RADZLAN, ANISSA RIDZUANA (2021) DEVELOPMENT OF STATISTICAL MODEL FOR THE PREDICTION OF HYDRATE FORMATION TEMPERATURE. [Final Year Project] (Submitted)

RAF’EE, SAYANG SYAZANNA (2021) INTERLOCKING BLOCKS: THE IMPACT ON GBI RATING AND SUSTAINABLE CONTRIBUTION ON RESIDENTIAL CONSTRUCTION. Masters thesis, Universiti Teknologi PETRONAS.

RAGAB, MOHAMMED GAMAL (2021) AN ENSEMBLE ONE-DIMENSIONAL CONVOLUTIONAL NEURAL NETWORK WITH BAYESIAN EXPONENTIAL ADAPTIVE GRADIENTS FOR SOUND CLASSIFICATION. Masters thesis, Universiti Teknologi PETRONAS.

RAHIM, NUR FAZLIANA (2021) Crude Palm Oil Prices Forecasting using Type 2 Fuzzy Time Series and Reasoning Based Model. Doctoral thesis, Universiti Teknologi PETRONAS.

RAHIM, MUHAMMAD IKMAL HAZIQ (2021) MACHINE LEARNING BASED TOOLS FOR ACID GAS REMOVAL UNIT (AGRU) PROCESS MONITORING. [Final Year Project] (Submitted)

RAHMAN, MD TAUHIDUR (2021) EFFECTS OF ANIONS AND CATIONS OF IONIC LIQUIDS ON CLAY SWELLING: EXPERIMENTAL AND SIMULATION APPROACHES. Masters thesis, Universiti Teknologi PETRONAS.

RAJA, NAVIN (2021) CRASHWORTHINESS ANALYSIS OF TRAPEZOID 3D ORIGAMI CRASH STRUCTURE. [Final Year Project] (Submitted)

RAJABI, EHSAN ZHALEH (2021) FLUIDIZED BED WET GRANULATION OF UREA USING STARCH BASED BINDER: EXPERIMENTAL AND MODELING STUDIES. PhD. thesis, Universiti Teknologi PETRONAS.

RAJENDIRAN, MUGUNTHAN (2021) MOLECULAR DYNAMICS SIMULATION OF SURFACTANT ADSORPTION IN KEROGEN PORE. [Final Year Project] (Submitted)

RAMELI, NAJIHAH (2021) SYNTHESIS AND CHARACTERIZATION OF IONIC LIQUID TEMPLATED MESOPOROUS SILICA NANOPARTICLES AS A DRUG CARRIER FOR IBUPROFEN AND QUERCETIN. Masters thesis, Universiti Teknologi PETRONAS.

RAMLI, HILMIZAN (2021) PROCESS SIMULATION AND DESIGN OF HYBRID MEMBRANE AND ABSORPTION SYSTEM FOR EFFECTIVE ACID GAS REMOVAL. [Final Year Project] (Submitted)

RANA, MD MASUD (2021) A DECISION TREE ALGORITHM FOR PEAK LOAD SHAVING IN ISOLATED MICROGRID USING HYBRID PV-BESS SYSTEM. Masters thesis, Universiti Teknologi PETRONAS.

RANA, ZAID ASHRAF (2021) COMPUTATIONAL STUDIES BASED ON PIECEWISE-LINEAR RELAXATIONS FOR PETROLEUM REFINERY PLANNING OPTIMIZATION. Masters thesis, Universiti Teknologi PETRONAS.

RANDY KONG, ZHENG CHEN (2021) EVALUATION OF THE PERFORMANCE OF ALPHA-OLEFIN SULFONATE (AOS), COCO GLUCOSIDE AND DECANE IN CREATING WINSOR TYPE-III MICROEMULSION. [Final Year Project] (Submitted)

RASIDI, SYAFIZA (2021) PARAMETRIC STUDY ON THE FACTORS AFFECTING SAND PRODUCTION. [Final Year Project] (Submitted)

RAVEENDRAN, KAVEETA (2021) OPTIMIZATION OF SODIUM BICARBONATE BASED SOLAR POND FOR POWER GENERATION. [Final Year Project] (Submitted)

RAVI, SHARVINESSH (2021) GREENHOUSE SENSING SATION. [Final Year Project] (Submitted)

RAVI, RUBEN (2021) Chloride Induced Stress Corrosion Cracking For Thermally Insulated Austenitic Stainless Steel Type 304 Using Wick Test. [Final Year Project] (Submitted)

RAVI CHANDRAN, NISALLINI (2021) EVALUATION OF DIMENSIONLESS NUMBERS FOR LOW SALINITY WATERFLOOD WITH WATER ALTERNATING GAS EOR. [Final Year Project] (Submitted)

RAZALI, AHMAD IZZUDDIN (2021) Numerical Parametric Study on The Indirect Measurement of Bridge Vibration by and instrumented Stationary Vehicle for Bridge Health Monitoring. [Final Year Project] (Submitted)

REDZUAN, FARAH ROSMANIZA (2021) FOAM STABILITY PERFORMANCE (HALF- LIFE) OF ALPHA OLEFIN SULFONATE (AOS) - COCO GLUCOSIDE (APG) WITH VARIATION IN CONCENTRATION OF SURFACTANTS, THE SALINITY, AND THE TEMPERATURE. [Final Year Project] (Submitted)

REMESH, SATHANISWARMAN (2021) Development of Oil Palm Lignin-Derived LSG Infused with Nanoadditives for Potential Supercapacitor Application. [Final Year Project] (Submitted)

ROSLAN, ANIS ARISA (2021) PREPARATION OF COFE2O4, TIO2 AND ZNO NANOPARTICLES AND THEIR SURFACE MODIFICATION FOR STABLE NANOFLUIDS APPLICATION. Masters thesis, Universiti Teknologi PETRONAS.

ROSLAN, MUHAMMAD NAJMI (2021) MODELLING OF POLYMER BLEND MIXED MATRIX MEMBRANE (MMM) FOR SEPARATION OF CARBON DIOXIDE (CO2) AND METHANE (CH4) SINGLE GAS. [Final Year Project] (Submitted)

ROSLI, NURUL KHAIRAH (2021) THE EFFECT OF ACIDIC IONIC LIQUID ON THE SOLUBILITY OF POLYETHER-ETHERKETONE (PEEK). [Final Year Project] (Submitted)

ROSMAN, AHMAD KHAIRI (2021) Email text analysis web application for emotion recognition using sentiment analysis. [Final Year Project] (Submitted)

ROSMAN, ARIEF AIZAT (2021) SYNTHESIS AND CHARACTERIZATION OF CONTROLLED-RELEASE FERTILIZER USING A ONEPOT SYNTHESIS STRATEGY. [Final Year Project] (Submitted)

ROZIDAN, MUHAMMAD DANISH (2021) RECOVERY OF RESIDUAL CRUDE PALM OIL (CPO) FROM PALM OIL MILL EFFLUENT (POME) VIA PROGRESSIVE FREEZING (PF) FOR VITAMIN E DETERMINATION. [Final Year Project] (Unpublished)

ROZLAN, NUR EZZATI (2021) A COMPARATIVE EFFICIENCY ANALYSIS ON THE USE OF HYDROXYETHYL CELLULOSE AND CARBOXYMETHYL CELLULOSE AS A SCALE INHIBITOR. [Final Year Project] (Submitted)

RUMAIZI, MUHAMMAD AMIRUL HAZIQ (2021) MODELLING OF THE TIME TO BOILOVER USING STATISTICAL ANALYSIS AND ARTIFICAL NEURAL NETWORKS. [Final Year Project] (Submitted)

Rabindran, Barathie (2021) An Automatic Group Formation Tool for Team- Based Learning Using Fuzzy K- means Clustering Method. [Final Year Project] (Submitted)

Ramesh, Yadavan (2021) VALORIZATION OF BIO-COAGULANT IN DRINKING WATER TREATMENT: ITS APPLICATION AND COST-BENEFIT ANALYSIS. [Final Year Project] (Submitted)

Ramli, Amir Qayyum (2021) TO DESIGN A COMPREHENSIVE ENGINEERING TRAINING MODULE USING SWANSOFT CNC SIMULATOR. [Final Year Project] (Submitted)

Ramli, Nur Iman Athilah (2021) EXPLAINABLE AI FOR COLON POLYPS DETECTION. [Final Year Project] (Submitted)

Ramzan Ali, Muhammad Ramzi (2021) Production Profile Economic Optimization and Production Sharing Contract Model Improvement for Malaysian PSC in Fields of 100 MMBOE Recoverable Volume. [Final Year Project] (Submitted)

Ravichanthiran, Dewananthene (2021) LIFE CYCLE ASSESSMENT ANALYSIS OF OIL PALM EMPTY FRUIT BUNCH DELIGNIFICATION USING LOW TRANSITION TEMPERATURE MIXTURES (CACTUS MALIC ACID & SUCROSE) WITH FEEDSTOCK VARIATION. [Final Year Project] (Submitted)

Razali, Muhammad Amirul (2021) Organic Removal of Pulp Wastewater Using Bench Scale Extended Aeration Activated Sludge System. [Final Year Project] (Submitted)

Ridzuan, Muhammad Khairul Shafiq (2021) Autonomous Aerial Quadrotor-Based Disinfectant Dispenser. [Final Year Project] (Submitted)

Rosnizam, Nur Izzah Farzana (2021) Effect of Fluid Velocity and Sand Flowrate on The Intrusive Erosion Probe Using 3D Computational Method. [Final Year Project] (Submitted)

Rozali, Muhammad Adib Zikri (2021) FYP Supervisor Allocation Management System. [Final Year Project] (Submitted)

S

SAAD, MUHAMMAD SYAAMIL (2021) INTEGRATED ELECTROCOAGULATION – MEMBRANE SYSTEM FOR COLOR AND COD REMOVAL OF PALM OIL MILL EFFLUENT: EXPERIMENTAL AND MODELLING. Masters thesis, Universiti Teknologi PETRONAS.

SAEED, ABDULRAHMAN (2021) INVESTIGATION OF LOCAL WOODS AS NATURAL MEMBRANES FOR WATER FILTRATION. [Final Year Project] (Submitted)

SAEIDI, TALE (2021) DEVELOPMENT OF NON-INVASIVE ULTRA-WIDEBAND ANTENNA ARRAY SENSORS FOR OIL PALM TRUNK HOLLOW DETECTION. Doctoral thesis, UNSPECIFIED.

SAFDAR, RIZWAN (2021) DEVELOPMENT OF THE IONIC LIQUID MODIFIED CHITOSAN-TRIPOLYPHOSPHATE MICROPARTICLES FOR CONTROLLING INSULIN RELEASE. PhD. thesis, Universiti Teknologi PETRONAS.

SAFRI, MUHAMMAD SYAHMI (2021) EVALUATION OF RHEOLOGICAL AND FILTRATION CHARACTERISTICS OF WATER-BASED MUD CONTAINED STARCHGRAPHENE NANOPARTICLES. [Final Year Project] (Submitted)

SAHIB, NAZARUL AFIZI (2021) SIMULATION OF COMPUTER'S CPU COOLING SYSTEM USING NANOFLUID AND ITS OPTIMIZATION THROUGH COMSOL MULTIPHYSICS. [Final Year Project] (Submitted)

SAHRIN, NURUL TASNIM (2021) Electrochemical Synthesis of Titania Nanotubes in Glycerol-Choline Chloride Ionic Liquid for Photodegradation of Formaldehyde. Masters thesis, Universiti Teknologi PETRONAS.

SAJID, ZUBAIR (2021) BEARING PERFORMANCE IMPROVEMENT OF SINGLE-LAP, SINGLE-BOLT CARBON/BASALT HYBRID FIBER-REINFORCED COMPOSITE JOINTS. Doctoral thesis, UNSPECIFIED.

SAJID, ZULQARNAIN (2021) SEDIMENTOLOGY AND GEOCHEMISTRY OF TRIASSIC TURBIDITIES OF SEMANGGOL AND SEMANTAN FORMATIONS, PENINSULAR MALAYSIA. Doctoral thesis, UNSPECIFIED.

SAJID, ZULQARNAIN (2021) SEDIMENTOLOGY AND GEOCHEMISTRY OF TRIASSIC TURBIDITIES OF SEMANGGOL AND SEMANTAN FORMATIONS, PENINSULAR MALAYSIA. PhD. thesis, Universiti Teknologi PETRONAS.

SAJJAD, MUHAMMAD (2021) ALJM-based Efficient VLSI Architecture for Fast-ICA in Real-time Signal. Masters thesis, Universiti Teknologi PETRONAS.

SALAH HAGAR, HAITHM SALAH MOHAMMED (2021) Numerical Study of Microbial Hydrogen Sulphide Generation in Hydrocarbon Reservoirs. Masters thesis, Universiti Teknologi PETRONAS.

SALEH ALGHURABI, AHMED MOHAMMED AHMED (2021) EVALUATION OF SAND EROSION IN OPEN-HOLE STANDALONE SAND SCREEN COMPLETION USING NUMERICAL SIMULATION. Masters thesis, Universiti Teknologi PETRONAS.

SALIM, MOHD NORSYAMIL (2021) ROLE OF HEXAGONAL BORON NITRIDE NANOPARTICLES (HBN-NP) IN WATER BASED DRILLING FLUIDS (WBDF) ON SKIN DAMAGE DURING DRILLING AT ELEVATED TEMPERATURE. [Final Year Project] (Submitted)

SALIMO, BOB GAMA (2021) EVALUATION OF MATERIAL BALANCE ERROR FOR OIL RESERVOIRS. [Final Year Project] (Submitted)

SALLEH AL-HUMAIKANI, MOHAMMED ABDULQAWI (2021) AUTOMATED MODEL GENERATION OF FSM AND NUSMV MODEL FROM RSA JAVA SOURCE CODE FOR MODEL CHECKING. Masters thesis, Universiti Teknologi PETRONAS.

SAMSUDIN, MOHAMAD FAKHRUL RIDHWAN (2021) MODIFIED TERNARY BISMUTH VANADATE-BASED PHOTOCATALYSTS FOR PHOTOELECTROCATALYTIC HYDROGEN STUDY. PhD. thesis, Universiti Teknologi PETRONAS.

SANADI, NOR AMIRAH BALQIS (2021) OPTIMIZING THE HUMAN ERROR ASSESSMENT REDUCTION TECHNIQUE (HEART) WITH FUZZY ANALYTIC NETWORK PROCESS (FANP) FOR HUMAN ERROR ASSESSMENT. [Final Year Project] (Submitted)

SANKAR, THENAMUTHAN (2021) ADSORPTION OF SYNTHETIC DYES ON POLYVINYL ALCOHOL GRAFTED CARBON NANOTUBE/ OIL PALM EMPTY FRUIT BUNCH HYDROGEL IN AQUEOUS SOLUTION. [Final Year Project] (Submitted)

SARAVANAN, PRAKASH (2021) MACHINE LEARNING PREDICTIVE MODEL DEVELOPMENT FOR VACUUM DISTILLATION UNIT IN LUBRICANT BASE OIL PRODUCTION. [Final Year Project] (Submitted)

SAVITRI, CINDY DHEVAYANI (2021) INVESTIGATION OF OVERPRESSURE AND MINERALOGY EFFECT ON ROCK MECHANICAL PROPERTIES OF MONTNEY SHALE GAS RESERVOIRS IN BRITISH COLUMBIA, CANADA. Masters thesis, Universiti Teknologi PETRONAS.

SAZALI, MUHAMMAD HAKIMIN (2021) MEASUREMENT OF DISTRIBUTED SITUATION AWARENESS (DSA) FOR OBSERVATION OF REAL-WORLD INSIDE THE PROCESS CONTROL ROOM. [Final Year Project] (Submitted)

SELVAN, SAARANEE NAYAHI (2021) OPTIMIZATION OF PROPYLENE HYDROFORMYLATION PROCESS FOR HIGH SELECTIVITY OF N-BUTYRALDEHYDE. [Final Year Project] (Submitted)

SHABOR RAMELI, ROZILAH (2021) BEHAVIORAL FINANCE FACTORS AND THEIR IMPACT ON RETIREMENT CONFIDENCE AMONG MALAYSIAN OIL AND GAS SKILLED EMPLOYEES. Masters thesis, Universiti Teknologi PETRONAS.

SHAD, MUHAMMAD KASHIF (2021) ENTERPRISE RISK MANAGEMENT IMPLEMENTATION AND ITS ECONOMIC VALUE ADDED ANALYSIS: THE MODERATING EFFECT OF CORPORATE SUSTAINABILITY REPORTING. Doctoral thesis, UNSPECIFIED.

SHAHBUDIN, MUHAMMAD IZHAM (2021) AQUEOUS PHASE REFORMING OF SORBITOL OVER SONOSYNTHESIZED NICKEL-BASED CATALYSTS FOR LIQUID VALUE-ADDED CHEMICALS PRODUCTION. Masters thesis, Universiti Teknologi PETRONAS.

SHAHID, MUHAMMAD ZUBAIR (2021) MODELLING OF PACKED COLUMN FOR CO2 ABSORPTION IN ALKANOLAMINES AT HIGH-PRESSURE AND HIGH-CO2 LOADING CONDITIONS. PhD. thesis, Universiti Teknologi PETRONAS.

SHAIK, NAGOOR BASHA (2021) PIPE CONDITION PREDICTION MODELS FOR OIL AND GAS PIPELINES USING ARTIFICIAL NEURAL NETWORKS. Doctoral thesis, UNSPECIFIED.

SHAMSULZAMAN, AMIRA MASTURINA (2021) CHARACTERIZATION ANALYSIS OF TROPICAL FRUIT FOOD WASTES AS A POTENTIAL FEEDSTOCK FOR BIOGAS PRODUCTION. [Final Year Project] (Submitted)

SHARIFF, SYUKUR (2021) EVALUATION OF DIMENSIONLESS NUMBERS DURING CO2 INJECTION FOR GEOLOGICAL STORAGE IN CARBONATE RESERVOIR. [Final Year Project] (Submitted)

SHAUN, SHAMEER ANWAR (2021) STUDY ON THE STABILITY OF HYBRID NANOFLUIDS AND THEORETICAL CALCULATION OF BULK PROPERTIES. [Final Year Project] (Submitted)

SHENG, CHONG JIE (2021) DETECTION OF EMOTIONAL SENSITIVITY USING FUNCTIONAL NEAR INFRARED SPECTROSCOPY BASED DYNAMIC FUNCTIONAL CONNECTIVITY. Masters thesis, Universiti Teknologi PETRONAS.

SHIVANANTHAN, ASHVIN (2021) SELECTING AN OPTIMAL ROAD CROSSING ROUTE USING SPATIAL ANALYTICS: A CASE STUDY OF THE EAST COAST RAIL LINK (ECRL). [Final Year Project] (Submitted)

SHOUKAT, NOUREEN (2021) DIAGENETIC CONTROLS IN SEQUENCE STRATIGRAPHY: A CASE STUDY OF MIOCENE SUCCESSION, NYALAU FORMATION, SARAWAK, EAST MALAYSIA. Masters thesis, Universiti Teknologi Petronas.

SHOZIB, IMTIAZ AHMED (2021) INVESTIGATION OF ELECTROLESS Ni-P-TiO2 COMPOSITE COATING ON AA7075 FOR SURGICAL TOOLS APPLICATION. Masters thesis, Universiti Teknologi PETRONAS.

SHUIB, NUR NABILA (2021) ELUCIDATION ON THE EFFECT OF GRAPHENE OXIDE FILLER SIZE TOWARDS CO2/CH4 GAS SEPARATION OF POLYSULFONE BASED MIXED MATRIX MEMBRANE. [Final Year Project] (Submitted)

SHUIB, HANIFATUR AFFIQ (2021) COLOR REMOVAL OF METHYLENE BLUE: ELECTROCOAGULATION VS MEMBRANE. [Final Year Project] (Submitted)

SIANG, WIRAWIT LEE (2021) GREEN SYNTHESIS OF SULFUR NANOPARTICLES AS POTENTIAL CATHODE IN LITHIUM-SULFUR BATTERY. [Final Year Project] (Submitted)

SINGH, NIHARIKA (2021) Q-REINFORCEMENT LEARNING BASED MULTI-AGENT BELLMANFORD ROUTING ALGORITHM FOR SMART MICROGRID COMMUNICATION NETWORK. Doctoral thesis, UNSPECIFIED.

SIVA SANGU, SANGEETHA (2021) DEVELOPMENT OF MXENE/CHITOSAN ELECTROCHEMICAL SENSOR FOR EFFECTIVE DETECTION OF DEOXYNIVALENOL AND ZEARALENONE MYCOTOXINS. Doctoral thesis, UNSPECIFIED.

SIVAN, SAILENDRA (2021) PREDICTION OF BUCKLING OF RHS COLUMNS USING FINITE ELEMENT ANALYSIS METHOD. [Final Year Project] (Submitted)

SIYAL, AHMER ALI (2021) DEVELOPMENT OF FLY ASH BASED GEOPOLYMER ADSORBENT FOR THE EFFECTIVE REMOVAL OF SURFACTANTS FROM MODEL WASTEWATER. PhD. thesis, Universiti Teknologi PETRONAS.

SREENIVASAN, PRAVIN (2021) HEALTH AND SAFETY AFTER IR 4.0 NORM: CONSTRUCTION INDUSTRY CASE. [Final Year Project] (Submitted)

SRITHARAN, ALSON ANDREW (2021) REVIEW OF THE NEW TRENDS IN DRILLING FLUID ADDITIVES. [Final Year Project] (Submitted)

SUBRAMANIA, SHAKTHISARAAN MUTHUSAMY (2021) COST ANALYSIS ON DIFFERENT ZEOLITE MEMBRANES FOR CO2/N2 GAS SEPARATION. [Final Year Project] (Submitted)

SUBRAMANIAN, HEMMAVATHANA (2021) METHYLENE BLUE DYE ADSORPTION USING BANANA STEM. [Final Year Project] (Submitted)

SUGUMARAN, S. SARASVATHI (2021) MODIFICATION OF GRAPHITIC CARBON NITRIDE, g-C3N4 PHOTOCATALYST THROUGH REED BED EXTRACTION FOR ANTIBIOTIC REMOVAL. [Final Year Project] (Submitted)

SUHAIMI, SITI NUR SABIHA (2021) SYNGAS PRODUCTION BY USING Ni-BASED CATALYST THROUGH DRY REFORMING OF METHANE. [Final Year Project] (Submitted)

SULAIMAN, MUHAMMAD NOOR FIRDAUS (2021) GENERELIZED PREDICTIVE CONTROLLER FOR SINGLE INPUT SINGLE OUTPUT (SISO) SYSTEM. [Final Year Project] (Submitted)

SUPPIAH, VENUGA (2021) FACTORS AFFECTING BIOMASS TORREFACTION. [Final Year Project] (Submitted)

SURESH, SACHIN DEV (2021) APPLICATION OF GAUSSIAN PROCESS REGRESSION (GPR) IN GAS HYDRATE MITIGATION. [Final Year Project] (Submitted)

SURESH, KASYAP (2021) A FEASIBILITY STUDY ON ORTHOGONAL SAW TAG DESIGN UTILIZING A NOVEL TIME-FREQUENCY LATTICE APPROACH. Masters thesis, Universiti Teknologi PETRONAS.

SYED HALIM, SYED AMIR HILMY (2021) EFFECT OF NANOFLUID ON VEHICLE'S ENGINE COOLING VIA COMSOL MULTIPHYSICS SIMULATION. [Final Year Project] (Submitted)

Sadhik Batcha, Mohd Ansar (2021) Determining Reduction of Diesel Fuel Consumption When Using Emulsified Biodiesel Fuels Derived from Palm Oil. [Final Year Project] (Submitted)

Sahak, Nur Syafiqah ‘Aqilah (2021) Effect of Graphene Modified Cement on Bond Strength. [Final Year Project] (Submitted)

Salem, Ain Farhanim Solha (2021) SMART HAJJ A Mobile Application to Guide the Pilgrims to Perform Hajj. [Final Year Project] (Submitted)

Salleh, Umar Al-Faruqi (2021) TECHNO – ECONOMIC STUDY OF BIOGAS POTENTIAL FROM POULTRY INDUSTRY AS RENEWABLE ENERGY FOR MANJUNG REGION. [Final Year Project] (Submitted)

Sampar, Vanessa Siah (2021) The Effect of Activity Space and Built Environment on Physical and Social Health Performances in Malaysia City. [Final Year Project] (Submitted)

Sandrasagran, Gohvinath (2021) Effects of Ions-DNA Interactions on Surface Charge of Graphene FieldEffect Transistor. [Final Year Project] (Submitted)

Sayed Azman, Syed Faiq Irfan (2021) Portable Small Items Stair-Lift (Detachable). [Final Year Project] (Submitted)

See, Wei Yang (2021) Waveguide Filter Technology Characterization and Analysis. [Final Year Project] (Submitted)

Seenivasan, Ashwiniy (2021) Automated Targeting Modelling for Integration of Diesel Plant into Hybrid Power Systems. [Final Year Project] (Submitted)

Seman, Fatyn Nurraihanah (2021) Dashboard for Monitoring Depression Amongst Twitter Users Using Sentiment Analysis. [Final Year Project] (Submitted)

Senthilvasan, Kishaan Kumar (2021) Study On The Effect Of Contemporary Malaysian House Designs On Energy Consumption. [Final Year Project] (Submitted)

Shaharum, Syahmi Anas (2021) Assessment of Mangrove Replanting Failures in Tanjung Kepah From the Perspective of Environmental Factors. [Final Year Project] (Submitted)

Shahrin Azmi, Faiq Haikal (2021) MyMedicin : Medicine Management Application. [Final Year Project] (Submitted)

Shaik Muhamed Raja, Shaik Shameer (2021) MODELLING, ANALYSIS AND OPTIMIZATION OF FORMILINE PRE-TREATMENT PARAMETERS FOR BIOETHANOL PRODUCTION FROM LIGNOCELLULOSIC BIOMASS USING RESPONSE SURFACE METHODOLOGY. [Final Year Project] (Submitted)

Shamrulismawi, Fatin Nur Syafiqah (2021) Sketch Recognition based on Deep Learning for Children’s Psychological Development Monitoring. [Final Year Project] (Submitted)

Shania Ting, Ying Ying (2021) Investigation on the Effect of Nanoparticle Diameter and Concentration on the Performance of Nanofluid Solar Pond. [Final Year Project] (Submitted)

Sharifudin, Mohamad Aliff Aiman (2021) The Design and Analysis of Self-Cleansing Trash Trap for Capturing Floating Debris at the Drainage System. [Final Year Project] (Submitted)

Sharudin, Mohammad Fazli (2021) THE EFFECT OF BINARY ACID CONCENTRATION ON THE MORPHOLOGY AND GROWTH KINETICS OF THE GREEN SYNTHESIZED SULFUR NANOPARTICLES. [Final Year Project] (Submitted)

Shokib, Nur Hazimah (2021) EFFECT OF SUGARCANE BAGASSE FIBER ON STRENGTH PROPERTIES OF FIBER-REINFORCED CONCRETE (FRC). [Final Year Project] (Submitted)

Shukor, Syazwan (2021) Identification and Grading of Manage Using Image Processing. [Final Year Project] (Submitted)

Sim , Chieh Ying (2021) Numerical simulation and evaluation of solar chimney coupled with heat trap unit. [Final Year Project] (Submitted)

Singh, Ashvirjit (2021) Evaluation of Bio coagulant in Synthetic Water for Turbidity Reduction via Coagulation and Flocculation process. [Final Year Project] (Submitted)

Singham, Yuveraaj Veera (2021) INVESTIGATION ON THE MECHANICAL PERFORMANCE OF SILICA FUME AND OPC STABILISED PEAT. [Final Year Project] (Submitted)

Sirajun Noor, Noor Azmiya (2021) Classification of Diabetes Mellitus (DM) using Machine Learning Algorithms. [Final Year Project] (Submitted)

Sivakumar, Kishen (2021) DATA WRANGLING AND MASSAGING USING ETL TOOL. [Final Year Project] (Submitted)

Sridaran Nair, Wamadevan Nair (2021) Remaining Strength Estimation For AISI 1020 Carbon Steel Pipeline Internal Corrosion Using Finite Element Analysis. [Final Year Project] (Submitted)

Srimurugan, Santheeban (2021) ADSORPTION STUDY OF METHYLENE BLUE DYE REMOVAL FROM AQUEOUS SOLUTION USING LIQUID NATURAL RUBBER/GEOPOLYMER COMPOSITE ADSORBENT. [Final Year Project] (Submitted)

Sugito, Lissaailin (2021) The Study of BIM on Controlling the Violation of Safety Rules in Building Project. [Final Year Project] (Submitted)

Suhaime, Schubrian (2021) Stock Price Prediction Analysis Dashboard using Machine Learning with LSTM Neural Network. [Final Year Project] (Submitted)

Suresh Naidu, Shaarvin Naidu (2021) Fire Hazard Risk Assessment Due to Domino Effect in Petroleum Plant. [Final Year Project] (Submitted)

Syahril, Zuhair Amin (2021) Study of Erosion Formation on M152 Steel Alloy due to Impact Angle. [Final Year Project] (Submitted)

Syed Nasruddin, Syed Muhammad Asim bin Syed Nasruddin (2021) Effect of Gas Injection in Pressure Restart of Waxy Crude Oil in the Pipeline for Different Timings After Pump Shutdown. [Final Year Project] (Submitted)

T

TABRI, AISHAH (2021) SIMULATION OF LOW SALINITY WATERFLOOD WAG TO RECOVER WAXY CRUDE OIL. [Final Year Project] (Submitted)

TAMALMANI, KAUSALYA (2021) A Study on Empty Fruit Bunch Powder and Oil Palm Frond Powder as Green Corrosion Inhibitor for Oil and Gas Application. Masters thesis, Universiti Teknologi PETRONAS.

TAN, WHITNEY WEE NEE (2021) THE IMPACT OF INTRODUCING CARBON BOOST TOWARDS THE GROWTH PERFORMANCE AND LIPID ACCUMULATION OF MICROALGAE. [Final Year Project] (Submitted)

TANG, XIAO HUI (2021) ENERGY PLANNING OPTIMIZATION MODELING FOR ELECTRICITY GENERATION IN MALAYSIA WITH SUSTAINABILITY CONSIDERATIONS. [Final Year Project] (Submitted)

TAUFIQURRAHMAN, IQBAL (2021) THE STUDY ON THE RESISTANCE SPOT WELDING OF DISSIMILAR MATERIALS OF STAINLESS STEEL 316L AND TI-6AL-4V TITANIUM ALLOY WITH THE INTERLAYER OF ALUMINUM ALLOY. Masters thesis, Universiti Teknologi PETRONAS.

TEE, SHU CHING (2021) ARTIFICIAL NEURAL NETWORK (ANN) MODELLING OF HYDROGEN STORAGE IN METAL HYDRIDES. [Final Year Project] (Submitted)

TELLA, ABDULWAHEED ADELEKAN (2021) AIR POLLUTION MODELLING IN MALAYSIA USING GIS AND MACHINE LEARNING ALGORITHMS. Masters thesis, Universiti Teknologi PETRONAS.

TENGKU KHAIRIL ASHRAF, TENGKU NURSOFEA CAMELIA ASHRAF (2021) A CRITICAL LITERATURE REVIEW ON THE EFFECT OF CONCENTRATION ON ADSORPTION RATE OF UREA ON MONTMORILLONITE. [Final Year Project] (Submitted)

TEO, KHAI SHENG (2021) Productivity of construction project after IR4.0 Norms. [Final Year Project] (Submitted)

TIONG, DOROTHEA HUI EN (2021) EXTRACTION OF LIGNIN FROM COCONUT HUSK USING PROTIC IONIC LIQUID. [Final Year Project] (Submitted)

TOHA, MD ABU (2021) Eco-innovation, Board of Directors and Firms Financial Performance: A Study on Malaysian Energy Listed Companies. Masters thesis, Universiti Teknologi Petronas.

Tajudin, Kamal Hafizuddin (2021) The Impact of Floating Debris to The Flow Parameter in The Drainage System. [Final Year Project] (Submitted)

Tan, Et Chian (2021) Design of 3rd Order Intermodulation (IM3) Free Microwave Transmitter. [Final Year Project] (Submitted)

Tan, Jin Shen (2021) ANALYSIS OF LONG-SPAN CABLE-STAYEDSTRUCTURESINCONSTRUCTION PHASE- NUMERICAL MODELLING. [Final Year Project] (Submitted)

Tan, Tai Keong (2021) Performance Analysis of a Novel Nanofluid Assisted Thermoelectric Air Conditioner for Energy Efficient Building. [Final Year Project] (Submitted)

Teh, Chin Siang (2021) DYNAMIC LOADING OF JACKET STRUCTURES DUE TO WAVE-IN-DECK EVENT. [Final Year Project] (Submitted)

Tengku Muhamad, Tengku Fatin Batrisya (2021) Capturing Customers Satisfaction - A Website based Feedback System for UTP Students. [Final Year Project] (Submitted)

Thamil Selvan, Sritharan (2021) Real Time Flow Assurance Diagnostic Using Data Analytics. [Final Year Project] (Submitted)

Thamotharan, Naaventhiran (2021) Study on The Mechanical Properties of Aluminium Wire Made from Friction Extrusion Process. [Final Year Project] (Submitted)

Tony, Charles Runyaam (2021) Prototyping and Piloting the Flexi Hose for Onshore and Offshore Pipeline Rehabilitation. [Final Year Project] (Submitted)

Tormizi, Iqbal Nuril Anwar (2021) Intrusion Detection System on Suricata with Bot Telegram as A Notification System. [Final Year Project] (Submitted)

U

UBA ZANGO, ZAKARIYYA (2021) OPTIMIZATION OF ADSORPTION PARAMETERS FOR EFFECTIVE REMOVAL OF POLYCYCLIC AROMATIC HYDROCARBONS FROM WATER USING METAL-ORGANIC FRAMEWORKS UIO-66(Zr) AND MIL-88(Fe). Doctoral thesis, UNSPECIFIED.

UL MUSTAFA, MUHAMMAD ZIA (2021) SYNTHESIS OF ENHANCED [EMIM][DCA] IONIC LIQUID TIO2 MIXED MATRIX MEMBRANES FOR CO2/CH4 SEPARATION. PhD. thesis, Universiti Teknologi PETRONAS.

ULLAH, ZAKA (2021) ANALYSIS OF GATE TUNING ON HYBRID GRAPHENE-METAL PLASMONIC ANTENNA FOR ABSORPTION ENHANCEMENT. Masters thesis, Universiti Teknologi PETRONAS.

USMAN, FAHAD (2021) INVESTIGATION OF SURFACE PLASMON RESONANCE ACETONE VAPOUR BIOSENSOR FOR NON-INVASIVE SCREENING AND MONITORING OF DIABETES. PhD. thesis, Universiti Teknologi PETRONAS.

Uzair, Muhamad Kamal Hazim (2021) Development of Under Bridge Crossing Navigation for Autonomous Vessel. [Final Year Project] (Submitted)

V

VASUDASS, SELVAPRAKSH (2021) Study On In-Situ Stress And Optimal Location For Hydraulic Fracturing. [Final Year Project] (Submitted)

VEERAPATRAN, ASSWIN (2021) OPTIMIZING ETHANOL PRODUCTION FROM COTTON-BASED ASTE TEXTILES THROUGH ENHANCED PRE-TREATMENT METHOD. [Final Year Project] (Submitted)

VEERENDRA, CHITTURI (2021) INVESTIGATION ON WELDABILITY OF DISSIMILAR FRICTION STIR WELDED AA5052 AND SS304 ALLOYS. Doctoral thesis, UNSPECIFIED.

Vasudevan, Theenendra (2021) Assessment of Alongshore Sediment Transport at Pantai Teluk Nipah, Pulau Pangkor. [Final Year Project] (Submitted)

Veejendran, Shesathri Ram (2021) Development and Characterization of Laser Scribed Polyimide Graphene Electrochemical Supercapacitor Electrodes with Different Substrates. [Final Year Project] (Submitted)

W

WAN BAKAR, WAN ZAIRANI (2021) IMPROVED WATER SATURATION ESTIMATION IN SHALY SANDSTONE THROUGH CLAY MINERALS ELECTROCHEMICAL STUDY. Doctoral thesis, UNSPECIFIED.

WAN IBRAHIM, WAN NUR HAZIQAH (2021) PROACTIVE MANAGEMENT OF NAPHTHENATES FORMATION AND DEPOSITION IN OIL PRODUCTION FACILITIES. [Final Year Project] (Submitted)

WAN MOHD GHAZNI, WAN MUHAMMAD HARRAZ (2021) TECHNO-ECONOMIC ANALYSIS OF PHOTOCATALYSIS UNDER LIGHT IRRADIATION USING TIO2, WO3, AND WO3/CQDS IN REMOVAL OF METHYLENE BLUE DYE. [Final Year Project] (Submitted)

WAN OSMAN, WAN NUR AISYAH (2021) ASSESSMENT OF NEW MEMBRANE CONFIGURATIONS FOR AN ULTRA-LOW-PRESSURE MEMBRANE BASED MICROALGAE FILTRATION. Masters thesis, Universiti Teknologi PETRONAS.

WAN SALIM, WAN SAFIZAH (2021) Risk Assessment Framework for Bridge Integrity Management System in Malaysia (BIMs). PhD. thesis, Universiti Teknologi PETRONAS.

WAN SUHAIMI, ________________ WAN MOHAMAD SYAMEER (2021) TECHNO ECONOMIC ANALYSIS FOR OPTIMAL DESIGN OF CROSS-FLOW FILTRATION FOR PRODUCED WATER TREATMENT. [Final Year Project] (Submitted)

WAZIR, EDRY JOHAN (2021) QUALITATIVE AND QUANTITATIVE CLASSIFICATION OF CONSTRUCTION MATERIALS: MACHINE LEARNING BASED. [Final Year Project] (Submitted)

WILLIS, ERRIC (2021) SIMULATION STUDY ON POLYMER FLOODING FOR EOR IN HETEROGENEOUS RESERVOIRS: EFFECT ANALYSIS OF KEY PARAMETERS. [Final Year Project] (Submitted)

WONG, ADRIAN GUO NENG (2021) THE EFFECT OF THE SATISFACTION OF ACTIVITIES PRIOR AND AFTER TRAVEL EPISODES, AND THE INVOLVEMENT OF PEOPLE ON TRAVEL SATISFACTION. [Final Year Project] (Submitted)

WOON, XIN YI (2021) PARAMETRIC OPTIMIZATION OF REGRESSION MODELS TO PREDICT THE SAYBOLT COLOR OF PETROLEUM CONDENSATES AND LIGHT CRUDE OILS. [Final Year Project] (Submitted)

Walter, Lyana Livan (2021) StandForPaw: Animal Rescue and Pet Adoption Mobile Application. [Final Year Project] (Submitted)

Wan Muhd Aminuddin, Wan Muhd Zulfiras (2021) SEEDED CRYSTALLIZATION AND FILTRATION OF COPPER FROM WASTEWATER AND THEIR EFFECTS ON COPPER RECOVERY. [Final Year Project] (Submitted)

Wan Suhaimi, Wan Irfan Hafez (2021) Convective Heat Transfer of Nanofluids in Helical Tube with Twisted Tape Insert. [Final Year Project] (Submitted)

X

Xiang Yi, Mervin Chang (2021) Parametric Study of FPSO Natural Periods and Mooring Restoring Forces Considering Various Mooring Line Materials. [Final Year Project] (Submitted)

Y

YAMIN, MOHD FADILLAH (2021) MECHANICAL AND MICROSTRUCTURE PROPERTIES EVALUATION OF SIMILAR THIN AA7075-T6 WELDS BY REFILL FRICTION STIR SPOT WELDING. Masters thesis, Universiti Teknologi PETRONAS.

YAP, JEN YANG (2021) DEVELOPMENT AND CHARACTERIZATION OF IONIC LIQUID LOADED HALLOYSITES NANOCONTAINERS FOR SMART PH-RESPONSIVE ANTICORROSION COATINGS. Masters thesis, Universiti Teknologi PETRONAS.

YAQUB, SANA (2021) INVESTIGATION OF BIOPOLYMER-BASED KINETIC GAS HYDRATE INHIBITORS FOR FLOW ASSURANCE. PhD. thesis, Universiti Teknologi PETRONAS.

YAU, WEN ZHEN (2021) EXTRACTION OF OXIDES FROM ALUMINIUM BLACK DROSS AS CATALYST SUPPORT FOR BIOFUEL PRODUCTION. [Final Year Project] (Submitted)

YAZID, A’ISYAH (2021) OPTIMIZATION OF CO2 SEQUESTRATION BY BRINE EXTRACTION. [Final Year Project] (Submitted)

YEE PEI, SHERLYN HEE (2021) OPTIMIZATION OF FURNACE FOR CRUDE HEATER USING ICON SYMMETRY PROCESS MODELLING. [Final Year Project] (Submitted)

YEKEEN, SHAMSUDEEN TEMITOPE (2021) MARINE OIL SPILL POLLUTION DECISION SUPPORT SYSTEM USING NOVEL GEOSPATIAL AND ARTIFICIAL INTELLIGENCE MODELS. Masters thesis, Universiti Teknologi PETRONAS.

YEOH, WAY LIPP (2021) MATHEMATICAL MODELLING TO PREDICT PHYSIOCHEMICAL PROPERTIES FOR LUBRICANT/ BASE OIL PROCESSING. [Final Year Project] (Submitted)

YEOW, KHAI ZHI (2021) EVALUATION STUDY OF RENEWABLE ENERGY POTENTIAL BY POULTRY FARMING IN MANJUNG REGION. [Final Year Project] (Submitted)

YIP, THANG FOONG (2021) ARTIFICIAL NEURAL NETWORK PREDICTION OF ASPHALTENE PRECIPITATION IN CRUDE OILS. [Final Year Project] (Submitted)

YOUNG ROSHNI, MUHAMMAD AMIR IDHAM (2021) EVALUATION OF FINGERING PATTERN IN POLYMER FLOODING PHENOMENA. [Final Year Project] (Submitted)

YUHARMON, NUR AMINATON SUFIA (2021) Development of Aloe Vera based Gel Polymer Electrolyte for Dye Solar Cells Application. Masters thesis, Universiti Teknologi PETRONAS.

YUSRIZAL, ABDUL KARIM (2021) FORECASTING OIL PRODUCTION USING STATISTICAL METHOD. [Final Year Project] (Submitted)

YUSSAINI, MOHAMAD FIKRI AFIQ (2021) THE EFFECTS OF PLANT-BASED CHEMICAL INHIBITOR AND ITS BLENDS WITH SILVER NANOPARTICLES FOR WAX INHIBITION APPLICATION. [Final Year Project] (Submitted)

YUSUF, JEMILAT YETUNDE (2021) DEVELOPMENT OF COBALT OXIDE AND HIERARCHICALLY POROUS ACTIVATED CARBON COMPOSITES FOR MICROWAVE ABSORPTION AT XBAND FREQUENCY. Masters thesis, Universiti Teknologi PETRONAS.

Yahaya, Huda Hannani (2021) Predictive Analytics on Employees Promotion using Machine Learning. [Final Year Project] (Submitted)

Yang, Xiong Liang (2021) FABRICATION AND CHARACTERIZATION OF AL7075-TITANIUM CARBIDE/GRAPHITE COMPOSITES FOR ENCHANCED MECHANICAL PROPERTIES USING FSP. [Final Year Project] (Submitted)

Yap, Hong Yi (2021) Study of Solid Particles Properties In Influencing Erosion of Gas Turbine Using Computational Fluid Dynamics. [Final Year Project] (Submitted)

Yee Ben, Kuek (2021) Using IoT LoRa to monitor the condition of fish farms. [Final Year Project] (Submitted)

Z

ZAHARUDIN, IMAN FIRDAUS (2021) SIMULATION OF NAPHTHA REFORMING PROCESS. [Final Year Project] (Submitted)

ZAHID, IMTISAL (2021) SYNTHESIS OF VALUABLE FUEL ADDITIVE SOLKETAL FROM BIO-GLYCEROL OVER ACID ACTIVATED META KAOLIN CLAY CATALYST. Masters thesis, Universiti Teknologi PETRONAS.

ZAIDI, MOHAMMAD AMIRUL HAKIM (2021) SIMULATION STUDY ON THE EFFECTS OF PENARA CRUDE OIL BLEND WITH JATROPHA OIL IN WAX INHIBITION APPLICATION USING PVTSIM SOFTWARE. [Final Year Project] (Submitted)

ZAIDI, PUTRA NAZARATUNNAIM (2021) EXPERIMENTAL STUDY OF THE EVALUATION OF STABILITY OF DIESEL BASED EMULSIFIED ACID AT DIFFERENT CONDITIONS. [Final Year Project] (Submitted)

ZAIN AZMAN, AFIQ ZARIF (2021) ENERGY RISK MANAGEMENT METHOD FOR AN AMMONIA REFRIGERATION PROCESS. [Final Year Project] (Submitted)

ZAIN EL BYTTEE, SABRINA (2021) CFD SIMULATION OF GAS SEPARATION IN DIVERGING T-JUNCTION. [Final Year Project] (Submitted)

ZAINAL ABIDIN, HAMZAH (2021) PREDICTIVE ANALYTICS MODEL FOR PROCESS SAFETY PERFORMANCE INDICATOR (PSPI) IMPROVEMENT USING BAYESIAN NETWORK APPLICATION ON BOW-TIE STUDIES. [Final Year Project] (Submitted)

ZAINAL ABIDIN, MUHAMMAD AIBAQ (2021) PREDICTION FOR FUTURE POTENTIAL PRODUCTION FOR T-FIELD NERITICS ZONE. [Final Year Project] (Submitted)

ZAINAL ABIDIN, NUR HAFIZAH (2021) Functionalized Carbon Quantum Dots from Rice Husks as Nanofiller in Membrane System. Masters thesis, Universiti Teknologi PETRONAS.

ZAINAL AZMAN, NUR ATIKAH (2021) PRESSURE GAUGE DATA NOISE REDUCTION FOR WELL TEST ANALYSIS USING WAVELET TRANSFORM. [Final Year Project] (Submitted)

ZAKARIA, ELLAYNOR (2021) DEVELOPMENT OF COAGULANT MATERIAL FROM HYBRID SOLID POLYMER ELECTROLYTES (SPE) FOR WASTEWATER TREATMENT. [Final Year Project] (Submitted)

ZIAUDIN AHAMED, MUHAMMAD NABIL (2021) MODELLING THE COMBINED EFFECT OF SALT PRECIPITATION AND FINES MIGRATION ON CO2 INJECTIVITY CHANGES IN SANDSTONE FORMATION. [Final Year Project] (Submitted)

ZOHAIR, SYED ALI QASIM (2021) PERFORMANCE EVALUATION OF AMMONIUM-BASED IONIC LIQUIDS AS THERMODYNAMIC GAS HYDRATE AND CORROSION INHIBITORS. PhD. thesis, Universiti Teknologi PETRONAS.

ZUHAIMI, NUR ALIA FARHAH (2021) INVESTIGATION OF COUPLED GEOMECHANICS AND FLUID FLOW CONSIDERATION ON RESERVOIR RECOVERY. [Final Year Project] (Submitted)

ZULFIQAR, MUHAMMAD (2021) SYNTHESIS AND OPTIMIZATION OF DMF-CONTROLLED NANOMATERIALS USING BBD-RSM APPROACH FOR PHENOL DEGRADATION. PhD. thesis, Universiti Teknologi PETRONAS.

ZULKEFLI, MOHD IKHWAN IZZAT (2021) SOCIO-RELIGIOUS HARMONY INDEX IN PERAK. Masters thesis, Universiti Teknologi Petronas.

ZULKIFLE, AIMAN ASYRAF (2021) NANOMATERIAL HEALTH EFFECT PREDICTION MODEL AND INHERENT SAFETY. [Final Year Project] (Submitted)

ZULKIFLE, MUHAMMAD AL-AMIN (2021) Failure Prediction in Laminated Fiber Reinforced Composite. [Final Year Project] (Submitted)

ZULKIFLI, NUR HIKMAH (2021) OPTIMIZATION OF BIODIESEL PRODUCTION FROM PALM OIL MILL EFFLUENT (POME) USING POTASSIUM HYDROXIDE CATALYST. [Final Year Project] (Submitted)

ZULKIFLI, NURUL MUSYIRA (2021) REMOVAL OF HEAVY METALS BY EMULSION LIQUID MEMBRANE. [Final Year Project] (Submitted)

ZULKIFLI, NAZLIAH NAZMA (2021) Surfactant Evaluation and Static Adsorption at High Temperature Reservoir using Seawater Salinity Surfactant Flooding Application. Masters thesis, Universiti Teknologi PETRONAS.

Zakaria, Mohd Faiz Farhan (2021) Finite Element Analysis of Hybrid Composite Plate through Tensile Test. [Final Year Project] (Submitted)

Zakaria, Muhammad Firdaus (2021) OPTIMIZATION OF FRACTIONATION OF RIFINED, BLEACHED AND DEODORIZED PALM OIL (RBDPO) VIA PROGRESSIVE FREEZING CRYSTALLIZATION (PFC). [Final Year Project] (Submitted)

Zamberi, Mohd Zaim Zarin (2021) Investigation of Solar Refrigeration System with Ground Based Cold Thermal Energy Storage for Tropical Countries. [Final Year Project] (Submitted)

This list was generated on Sat Apr 13 18:15:42 2024 +08.