Browse by Type

Marliyana binti Abdul Wahab, Marliyana (2010) Cooling Storage for Vehicles Using Thermoelectric Cooler. [Final Year Project] (Unpublished)

Filzah Hanis Hairudin, Filzah Hanis (2010) Ray Tracing Analysis For Wireless Propagation. [Final Year Project] (Unpublished)

Mohd Afiq Bin Ariffin, Mohd Afiq (2010) Preliminary Safety Assessment of Biomass Catalytic Gasification System (Pilot Plant Scale). [Final Year Project] (Unpublished)

Nor Jamal, Norzhafran (2010) Application of Solar Dryer in Drying Chilli. [Final Year Project] (Unpublished)

Mohd Khaidi, Mohd Syazwan (2010) Dynamic Analysis and Simulation of Arm Trainer. [Final Year Project] (Unpublished)

Khalid, Nurzafrrah (2010) PORTABLE SECURITY SYSTEM. [Final Year Project] (Unpublished)

Zolkefli, Masmaliza (2010) An Investigation Into Abrasive Resistance of Aluminum 6063, Stainless Steel 316 And Mild Steel Using Taber Linear Abraser And Taber Rotary Abraser. [Final Year Project] (Unpublished)

Hasan Nawawi, Syazana (2010) REMOTE MONITORING OF VITAL SIGNS. [Final Year Project] (Unpublished)

Ong , Wen Sher (2010) Wired LAN Door Access Controller With Web-based Interface. [Final Year Project] (Unpublished)

Mohd Rosdi, Mohd Akhimullah (2010) Contribution of Vehicle System and Accessories on Fuel Consumption of Perodua Viva. [Final Year Project] (Unpublished)

Gonasagran, Yoganathan (2010) DESIGN AND ANALYSIS OF CONTROLLER FORA COUPLED TANK SYSTEM VIA STATE SPACE APPROACH. [Final Year Project] (Unpublished)

Samer , Sherif Kassem (2010) Adaptive MLP Network Reference Model for Control Using Flow of Split Level Coupled Tank. [Final Year Project] (Unpublished)

Mustafa, Fadwa Babiker (2010) Binary Mixtures' Thermophysical Properties Study of Novel Ionic Liquids Incorporating Thiosalicylate Anion. [Final Year Project] (Unpublished)

Abu Bakar, Suliana (2010) Emulsion Stability and Combustion Characteristics Glycerol-Water Mixture. [Final Year Project] (Unpublished)

Aziz, Muzakkir (2010) IONIC LIQUID BASED AQUEOUS TWO PHASE SYSTEMS. [Final Year Project] (Unpublished)

Azid, Nor Amizah (2010) Preparation and Characterization ofCo-Ni/Al203 Catalyst for Steam Reforming of Acetic Acid. [Final Year Project] (Unpublished)

M. Gorres, Oliver (2010) Preparation and characterization of Fe/ Ah03 catalyst for steam reforming of ethanol. [Final Year Project] (Unpublished)

Salleh, Siti Fatihah (2010) Development of Magnetic Zeolites for Removal of Metallic Contaminants from Industrial Wastewater. [Final Year Project] (Unpublished)

Benjamin Salip, Ignatius (2010) Parametric Analysis on the Study of Hydrogen Production From Biomass Using Mixtures of Pure Ceilulosic Material and Adsorbent. [Final Year Project] (Unpublished)

Lee Kar Mun, Carmen (2010) Thermodynamics Properties Modeling Using Cryogenic Process. [Final Year Project] (Unpublished)

Abdull Kadir, Noor Azliza (2010) Finite Element Analysis of Interacting Defects in Corroded Pipelines. [Final Year Project] (Unpublished)

OTHMAN, MOHD HAFIZ (2010) MICROSTRUCTURE AND MECHANICAL PROPERTIES EVALUATIONS OF HEAT TREATED DISSIMILAR METAL JOINT WELDMENT BETWEEN API 5CT C90 AND ASTM A182 F22. [Final Year Project] (Unpublished)

Md Yazid, Mohd Bariq (2010) Cylinder Deactivation ofPERODUA Viva UJL Engine for Better Fuel Consumption. [Final Year Project] (Unpublished)

Fakhrol, Den Agustino (2010) Development of integrated approach employing Fe/TK)2-[BMIMJFeCl4 system for sulfur removal from model oil. [Final Year Project] (Unpublished)

HOAN, LE (2010) Simulation of Membrane Technology for C02 Removal for cross-flow model using ASPEN HYSYS software. [Final Year Project] (Unpublished)

VIRAKRAINGSEI, HAI SOCHEAT (2010) Underwater Acoustic Communication (UWA) Data Packet Size Optimization based on Throughput. [Final Year Project] (Unpublished)

Mohd Yusniman b Yusof, Mohd Yusniman (2010) EFFECT OF PROCESSING TECHNIQUES ON THE MECHANICAL PROPERTIES OF OIL PALM EMPTY FRUIT BUNCH COMPOSITE. [Final Year Project] (Unpublished)

Samsudin, Mohammad Syafiq (2010) Preparation of Oil Palm Frond (OPF) for biomass Gasification. [Final Year Project] (Unpublished)

Nor Saeran, Muhd lrsyaduddin Zakwan (2010) ADSORBENTS BASED ON CARBON NANOTUBES FOR WASTE WATER TREATMENTS. [Final Year Project] (Unpublished)

Omar, Madiah (2010) Model Predictive Control Design and Implementation on a 3x3 Model of Shell Heavy Oil Fractionator. [Final Year Project] (Unpublished)

Muhammad Nazir bin Mohd Ali, Muhammad Nazir (2010) Extraction of Oil from Hevea Brasiliensis by using Ethanol as Solvent. [Final Year Project] (Unpublished)

Tan , Kwong Hoe (2010) Vehicle Ride Investigation Of Myvi With Adams Car. [Final Year Project] (Unpublished)

AB MANAP, AZLYN (2010) SECURED AUTOMATED LOGON FOR WINDOWS USING PRESENCE DETECTION. [Final Year Project] (Unpublished)

Anak Stephen, Hilary (2010) Development of a Game-Based Courseware for Slow Learners. [Final Year Project] (Unpublished)

Muhammad Amsyar bin Faizi, Muhammad Amsyar (2010) The Effect of Welding Different Plate Thickness on Heat Affected Zone Microstructure and Hardness. [Final Year Project] (Unpublished)

Tan Yusoff, Tuan Mohd Faizie (2010) The Influence of Filler Loading on Mechanical Properties of Rice Husk Reinforced High Density Polyethylene. [Final Year Project] (Unpublished)

Zaina Abidin, Noor Azurah (2010) A Study of Cadmium, Nickel and Copper Adsorption Using Multi-walled Nanotubes. [Final Year Project] (Unpublished)

IBRAHIM, ANAS (2010) Absorption Performance Study of STONVENT for C02-Natural Gas System. [Final Year Project] (Unpublished)

Shukri, Farid Faliq (2010) Characterization and Origin of Dolomite Associated with Hydrothermal Iron Ore in Paleozoic limestone, Kinta Valley. [Final Year Project] (Unpublished)

Tengku Yahya Shah, Tengku Zuhaili (2010) Desulfurization of Model Oil using combined Cu/Ti02 Photocatalysis and BMImCu2Cl3 Ionic Liquid Extraction. [Final Year Project] (Unpublished)

Basar, Noor Hemiza (2010) Development of Fe/Ti02 Photocatalyst for Hydrogen Production from Water under Visible Light. [Final Year Project] (Unpublished)

Syed Abdul Rahman, Syarifah Nor Faizah (2010) DEVELOPMENT OF Mnffi02 PHOTOCATALYST FOR HYDROGEN PRODUCTION FROM WATER UNDER VISIBLE LIGHT. [Final Year Project] (Unpublished)

Mat Hassan, Mohd Farhan (2010) Dispersibility Study of Nitrated PETRONAS Cokes. [Final Year Project] (Unpublished)

Abdul Aziz, Mohd Azuary (2010) Effect Of System Pressure Towards Natural Gas Dehydration Efficiency Using Centrifugal Force. [Final Year Project] (Unpublished)

Ayob, Muhammed Syahidan (2010) EFFECTS OF THERMAL TREATMENT ON DECOMPOSITION OF MALAYSIA BIOMASS. [Final Year Project] (Unpublished)

Mamat, Muhd Azimey (2010) Electrochemical Window of l-Butyl-3-Methylimidazoliuiii Hexafluorophosphate. [Final Year Project] (Unpublished)

Md Rosdi, Mohammad Hanif (2010) Experimental Evaluation ofSMART Surfactant (UTP-SmartSurf) Derived From Natural Oil for EOR Application. [Final Year Project] (Unpublished)

Mohamad Zin, Hafiza Bismilhuda (2010) Fouling Mitigation Suite: GUI Development in Excel. [Final Year Project] (Unpublished)

Abd Rahman, Nur Atiqah (2010) Heat Confining Properties of Carbon Dioxide and Other Polyatomic Greenhouse Gases which Potentially Causes Global Warming. [Final Year Project] (Unpublished)

MOHAMMED ELMOLLA, EMAD SOLIMAN (2010) DEVELOPMENT OF A TREATMENT SYSTEM FOR ANTIBIOTIC WASTEWATER. [Final Year Project] (Unpublished)

Masri, Asiah Nusaibah (2010) Modelling and Simulation of Ecotoxicity of Ionic Liquids Using QSAR. [Final Year Project] (Unpublished)

Azme, Muhammad Fahmi (2010) Parameters Affecting Biomass Densification Process of The Rice Husk. [Final Year Project] (Unpublished)

Rozali, Attia (2010) THERMAL CONDUCTIVITY OF LIMESTONE. [Final Year Project] (Unpublished)

Mat Salleh, Muhammad Zulhaziman (2010) HEAT EXCHANGER FOULING MITIGATION BY BLENDING AND ULTRASONIC. [Final Year Project] (Unpublished)

Sani, Lukman (2010) Kinetics of Polymer Retention in Porous Media and its Influence in Enhanced Oil Recovery (EOR) Applications. [Final Year Project] (Unpublished)

Hashim, Mohd Haiqal (2010) Modeling and Economic Optimization of Carbon Capture in Malaysia9 Power Plants. [Final Year Project] (Unpublished)

Hartono, Nasibah (2010) Modeling of Crude Distillation Unit. [Final Year Project] (Unpublished)

Jamil, Mohd Afil Bokhari (2010) Modelling & Predictive Control of a Crude Distillation Unit. [Final Year Project] (Unpublished)

Moksin, Umiah (2010) Optimization ofWater Network Design for a Petroleum Refinery. [Final Year Project] (Unpublished)

Zainal Abidin, Nursyazwani (2010) Preparation and Characterization of Co-Fe/Al203 Catalyst for Steam Reforming of Ethanol. [Final Year Project] (Unpublished)

RAJ AN THIRAN, SIVERANJINI (2010) PREPARATION OF Co/Si02 SPHERICAL MODEL NANOCATALYST USING REVERSE MICROEMULSION METHOD. [Final Year Project] (Unpublished)

Kim Chi, Nguyen (2010) Risk Assessment and Management for C02 Transportation Pipelines. [Final Year Project] (Unpublished)

Zainal Abidin, Azwan Fitri (2010) Solubility of Carbon Monoxide and Hydrogen in Dodecane and 1,4-Dioxane. [Final Year Project] (Unpublished)

Mohd Sapiah, Razak (2010) Thermal Treatment of Marine Soil Contaminated With Hydrocarbon. [Final Year Project] (Unpublished)

Yaacob, Nurul Farhah (2010) Transesterification of Castor Oil to Biodiesel by using Mg-AI Hydrotalcites as a Catalyst. [Final Year Project] (Unpublished)

Kanyadibya , Kirana (2010) Upgrading Bio-oil over Different Solid Catalysts. [Final Year Project] (Unpublished)

Mustaffa, Muhammad Afiq (2010) Dehydration of Natural Gases via High Centrifugal Force (Effect of Inlet Gas Velocity to Separation Efficiency). [Final Year Project] (Unpublished)

Zahari, Aimi Zeti (2010) Development of Fe/Ti02 Photocatalyst via Precipitation Method for Hydrogen Production from Water. [Final Year Project] (Unpublished)

Mohammad Adam, Nur Farhanah Nadhirah (2010) Estimation ofEnthalpy of Dissociation and Hydration Number in Single Hydrate Systems. [Final Year Project] (Unpublished)

Useng, Hooda (2010) Model Predictive Control of Gas Processing Plant Focused on Depropanizer Column. [Final Year Project] (Unpublished)

Ramli, Erry Fareena (2010) Solvent Effect (NMP and DCM) on Morphology and C02/CH4 Separation Performance of Asymmetric Polysulfone Membranes. [Final Year Project] (Unpublished)

RAMLI, FATIN NADIAH (2010) Synthesis and Characterization ofImidazolium Based Ionic Liquid-Intercalated. [Final Year Project] (Unpublished)

STEPHEN, HILARY (2010) DEVELOPMENT OF A GAME- BASED COURSEWARE FOR SLOW LEARNERS. [Final Year Project] (Unpublished)

Mohamad Nazrin B Zainalabidin, Mohamad Nazrin (2010) Design Of Flexible High Rise Structure To Cater To Human Comfort Criteria And Structural Stability. [Final Year Project] (Unpublished)

Thian , Hui Ching (2010) Renewable Energy From UTP Water Supply. [Final Year Project] (Unpublished)

Nur tsyiefa Binyi , Nur Asyifa (2010) Physical Properties Analysis of Amine Based Solvent (STONVENT). [Final Year Project] (Unpublished)

Noorazliza Sulaiman, Noorazliza (2010) Electricity Forecasting For The Small Scale Power System Using Artificial Neural Network. [Final Year Project] (Unpublished)

Munusamy, Vignesh Kumar (2010) Development of Nanocrystalline Cellulose (NCC) from Microcrystalline Cellulose (MCC) via Dissolution using Ionic Liquid: 1-butyl-3-methylimidazolium hydrogen sulfate (BMIM HSO4). [Final Year Project] (Unpublished)

Haszlizah Binti Abd Hamit, Haszlizah (2010) Design of Packed Column for CO2 Absorption from NG at Reserves Using FLUENT. [Final Year Project] (Unpublished)

Tuan Mohd Faizie Bin Tan Yusoff, Tuan Mohd Faizie (2010) The Influence of Filler Loading On Mechanical Properties of Rice Husk Reinforced High Density Polyethylene. [Final Year Project] (Unpublished)

Lenis Chan, Chia Yam (2010) Assessment of Local Material for Drilling Fluid Formulation. [Final Year Project] (Unpublished)

Hamzah, Abdul Hazeem (2010) Parametric Studies on Triangular Tension Leg Platform. [Final Year Project] (Unpublished)

Jailani, Abdul Qadir (2010) Removal of Iron (Fe2+) from Groundwater by Oxidation through Normal and Aerated Lagoon. [Final Year Project] (Unpublished)

AHMAD SOHAIMI, AHMAD FAWWAZ (2010) ULTIMATE STRENGTH ANALYSIS OF STEEL JACKET PLATFORM. [Final Year Project] (Unpublished)

Mohd Sharir, Ainil Husna (2010) The Utilization of Abandoned Mining Pond as Retention Pond to Cater Stormwater Runoff. [Final Year Project] (Unpublished)

YAZID@MAJID, AIZA AMELIA (2010) PARAMETRIC STUDY OF FPSO RESPONSES. [Final Year Project] (Unpublished)

Lim, Bartlemy (2010) Tensile Strength Capacity of Grout-Filled Tubular Steel. [Final Year Project] (Unpublished)

Che Wan Samsudin, Che Wan Muhsi (2010) Permeability Characteristics of Tropical soils at UTP Campus. [Final Year Project] (Unpublished)

Mohamed Zamri, Chyrina (2010) Response of a Truss SPAR Offshore Platform to Environmental Loads (case study : Kikeh Field at Sabah Waters). [Final Year Project] (Unpublished)

PAUZI, FATIN HANANI (2010) WIND-STRUCTURE INTERACTION ON TRANSMISSION TOWER. [Final Year Project] (Unpublished)

Ramdass, Natasha Ramdass (2010) Treatment of Pharmaceutical Wastewater Using Sequencing Batch Reactor. [Final Year Project] (Unpublished)

Sohari, Hazman (2010) ROAD NETWORK ANALYSIS OF PULAU PINANG USING GIS. [Final Year Project] (Unpublished)

Motimbun, Nony Motimbun (2010) Parametric Study of Spar Platform Responses. [Final Year Project] (Unpublished)

Paku Rozi, Izzah (2010) Suitability Location Analysis for Kindergarten. [Final Year Project] (Unpublished)

Saminal, Siti Nurshamshinazzatulbalqish bt. Saminal (2010) REMOVAL OF LEAD FROM AQUEOUS SOLUTION BY ADSORPTION ON COCONUT COIR ACTIVATED CARBON. [Final Year Project] (Unpublished)

JOSHUA LING , ZHONG YIE (2010) Modeling and Simulation of Hill Side Feasibility with GIS. [Final Year Project] (Unpublished)

Lenis Chan , Chia Yam (2010) Assessment of Local Material for Drilling Fluid Formulation. [Final Year Project] (Unpublished)

ASRI, MORD ASFIRDAUS (2010) DESIGN OF A LONG SPAN TRANSFER BEAM (REINFORCED CONCRETE) AND THE MODE OF CONSTRUCTION AND REMOVAL OF SCAFFOLDING TO CATER TO THE TRANSFER BEAM. [Final Year Project] (Unpublished)

Suan , Suan Tee Hooi (2010) EFFECTS OF BENTONITE ON SKIN FRICTION OF BORED PILES. [Final Year Project] (Unpublished)

Mohd Patani, Mohd Farhan (2010) Infiltration Characteristics of Tropical Soils at University Technology PETRONAS Campus. [Final Year Project] (Unpublished)

SYED AMEAR, SYED ARIFF SHAH BIN SYED AMEAR (2010) Effects of Reinforcement On The Ultimate Strength of Tubular Joints of Offshore Jacket Platform. [Final Year Project] (Unpublished)

Tang , Tang Ang Khian (2010) Analysis of Capacity and Level of Service of Medan Kidd, Ipoh. [Final Year Project] (Unpublished)

Mohd Nasohah, Umi Najua Binti Mohd Nasohah (2010) Sequencing Batch Reactor for the Removal of Nickel from Refinery Wastewater. [Final Year Project] (Unpublished)

Maidin, Zareina Bt Maidin (2010) Parametric Study of Semi Submersible Responses. [Final Year Project] (Unpublished)

Mohd Ariffin, Mohd Labib (2010) PRIORITIZING CRITERIA FOR ASSESSMENT OF QUALITY IN COMPLETED RESIDENTIAL BUILDING PROJECTS. [Final Year Project] (Unpublished)

SALEHUDDIN, MUHAMMAD YAZID (2010) GREEN BUILDING INDEX MALAYSIA: DRIVERS AND BARRIERS OF IMPLEMENTING IT IN THE MALAYSIAN CONSTRUCTION INDUSTRY. [Final Year Project] (Unpublished)

ALIF SYAHRIZAD BIN RAMLI, ALIF SYAHRIZAD (2010) Study on Influences of Rear-Wheel Turn Angle to Performance of Four Wheel Steering (4WS) Vehicle. [Final Year Project] (Unpublished)

Mohamad Izham Bin Mohamad Zainal, Mohamad Izham (2010) Dynamic Load Analysis of the Micro Unmanned Aerial Vehicle (UAV)Structure. [Final Year Project] (Unpublished)

Razak, Mohamad Amin (2010) Characterization of Various Biomass Sources for Co-Gasification. [Final Year Project] (Unpublished)

Razak, Mohamad Amin (2010) Characterization of Various Biomass Sources for Co-Gasification. [Final Year Project] (Unpublished)

Suhaimi, Noorazreen (2010) Comparison of Performance between Centrifugal and Positive Displacement Pump at Low Flow Rate. [Final Year Project] (Unpublished)

Mohd Nordin, Mohammad Farhan (2010) Design of Active Suspension using Robust PID Controller. [Final Year Project] (Unpublished)

Selamat, Noor Atilia (2010) Development ofBiocomposite: The Influence of Natural Fillers. [Final Year Project] (Unpublished)

Hashim, Mohammad Hafiz (2010) Stress Intensity Factor for a Crack in a Strip. [Final Year Project] (Unpublished)

Mhd Jamin, Mohd Khairul Hanafi (2010) Study OfiGBT Drive For Three Phase Load. [Final Year Project] (Unpublished)

Drieberg, Micheal (2010) Channel Assignment Strategies for Throughput Enhancement in High Density Wireless Local Area Networks. [Final Year Project] (Unpublished)

Abdul Rahim, Nurul Farhana (2010) POWER SYSTEM ANALYSIS AT PLANT DISTRIBUTION SYSTEM. [Final Year Project] (Unpublished)

Abd Majid, Nur Intan Marlyny (2010) SIMULATION AND DESIGN TRANSMITTER FOR SEABED LOGGING (SBL). [Final Year Project] (Unpublished)

Zakaria, Nurazlin (2010) Synchronization and Delay Techniques for Driving lMHz Totem-Poled Power MOSFET Configuration. [Final Year Project] (Unpublished)

Ahmad Sohaimi, Ahmad Fawwaz (2010) ULTIMATE STRENGTH ANALYSIS OF STEEL JACKET PLATFORM. [Final Year Project] (Unpublished)

Eman Andeme, Felipe Nguema (2010) A PROPOSED LOAD SHEDDING SCHEME FOR EG LNG PLANT. [Final Year Project] (Unpublished)

Saleh, Hairul Nazmi (2010) Application of Automatic Speed Reducer System in Vehicle. [Final Year Project] (Unpublished)

Isahak, Nor Haziana (2010) DESIGN AND MODELING OF A SHORT -STROKE LINEAR PERMANENT MAGNET MOTOR. [Final Year Project] (Unpublished)

Lee , Tze Yang (2010) Economic Analysis of a Deregulated Power System Using the Proportional Tracing Method. [Final Year Project] (Unpublished)

Manab, Hafizul Hasni (2010) EDUCATIONAL PROCESSOR. [Final Year Project] (Unpublished)

Ahmad Kamal, Hayfa Amira (2010) ELECTRICAL POWER SYSTEM MODELING AND SIMULATION OF UNIVERSITI TEKNOLOGI PETRONAS GAS DISTRICT COOLING PLANT. [Final Year Project] (Unpublished)

Sulaiman, Noorazliza (2010) Electricity Forecasting For The Small Scale Power System Using Artificial Neural Network. [Final Year Project] (Unpublished)

Mohamad Azmi, Intan Mastura (2010) Assessment of the EPA-SWMM Software for Urban Stormwter Management Manual (MSMA) Requirement. [Final Year Project] (Unpublished)

Ngan , Yew Teng (2010) Capacity of Grout- Filled Steel Beamunder Flexural Cyclic Load. [Final Year Project] (Unpublished)

Said, Mohd Sallehuddin (2010) CARBON CARBON SUPERCAPACITOR. [Final Year Project] (Unpublished)

Azhar, Khyruzihan (2010) CORRELATION BETWEEN ELECTRICAL RESISTIVITY AND SOIL WATER CONTENT. [Final Year Project] (Unpublished)

Ab llah, Norkaramina (2010) Design of Contactor Vessel for C02 absorption from Natural Gas at Reserves using FLUENT. [Final Year Project] (Unpublished)

ZAINALABIDIN, MOHAMAD NAZRIN (2010) DESIGN OF FLEXIBLE HlGH RISE STRUCTURE TO CATER TO HUMAN COMFORT CRITERIA AND STRUCTURAL STABILITY. [Final Year Project] (Unpublished)

Abd Hamit, Haszlizah (2010) Design of Packed Column for C02 Absorption from NG at Reserves Using FLUENT. [Final Year Project] (Unpublished)

MOHD ZOLKEPLI, MOHAMAD IBRAHIM (2010) Desulphurization of Model Oil using Immobilized [BMIM]FeCL. onto Polysulfone (PSF). [Final Year Project] (Unpublished)

Zulkefli, Muhammad Aminuddin (2010) Development of Coastal Protection Scheme Database for Peninsular Malaysia. [Final Year Project] (Unpublished)

Munusamy, Vignesh Kumar (2010) Development of NanocrystaUine Cellulose (NCC) from Microcrystalline Cellulose (MCC) via Dissolution using Ionic Liquid: 1-butyl-3-methylimidazolium hydrogen sulfate (BMIM HS04). [Final Year Project] (Unpublished)

Shamsuddin, Nurfisah (2010) Eco-Drainage System Towards Sustainable Urban Environment. [Final Year Project] (Unpublished)

Tajudin, Nor Hafizah (2010) Effects of Curing Regime and Binders on Polymeric Concrete. [Final Year Project] (Unpublished)

Mohd. Aris, Siti Humairah (2010) Extraction Technique for Lipid from Microalgae for Biodiesel. [Final Year Project] (Unpublished)

Tigabwa, Yosef Ahmed (2010) Flowsheet Design Of CO2 Adsorption System With Aminated Resin At Natural Gas Reserves. [Final Year Project] (Unpublished)

Ahmad, Fathin Fathiha (2010) Flux and Rejection of Amine Using Membrane Process. [Final Year Project] (Unpublished)

Ahmad Nazar, Nur Ain (2010) Gas Permeation through Polysulfone-Polyl mide (PSF-PI) Miscible Blend Membrane. [Final Year Project] (Unpublished)

Abdullah, Ahmad Syafri (2010) Green Building Index Malaysia -Qualitative Survey on Vernacular Housing Type in Malaysia. [Final Year Project] (Unpublished)

MOHD KHIR, MOHD KHAIRUL FAQIH (2010) DEVELOPMENT OF SOLAR BATTERY CHARGING SYSTEM FOR ELECTRIC CARS. [Final Year Project] (Unpublished)

Mohamed Saad, Ahmed (2010) FLOW ANALYSIS OF OVERTAKING VEIDCLES: CFD STUDY. [Final Year Project] (Unpublished)

SAHARUDIN, NURUL NISHA (2010) FOUNDATION FIELD BUS INTEROPERABILITY TESTING AND SYSTEM CONFIGURATION FOR EMERSON HOST. [Final Year Project] (Unpublished)

Nik Adnan, Nik Mohd lrfan (2010) Heavy Metal Loadings in Residential Yards in Tronoh, Perak. [Final Year Project] (Unpublished)

Tengku Omar, Tengku Faridah (2010) OIL RECOVERY AND HEAVY METALS REMOVAL FROM PALM OIL MILL EFFLUENT BY USING CEIBA PENTANDRA (L.) AS A NATURAL SORBENT. [Final Year Project] (Unpublished)

Said, Mohamad Farhan (2010) Hydrodynamic Analysis on Semi-Submersible Platform. [Final Year Project] (Unpublished)

Mohd Zin, Nurul Ashikin (2010) Operational Characteristics of Ipoh City Bus Services Route : Ipoh- Ipoh Garden East. [Final Year Project] (Submitted)

Mohd Shariai, Aminur Rashid (2010) Remediation and Mitigation Measures for SlowingDown the Decomposition of Black Shale at Batu Gajah, Perak. [Final Year Project] (Unpublished)

Mohd, Mohamad Hazeem (2010) Separation of Zinc Chloride (ZnCI2) Metal Using Membrane Process. [Final Year Project] (Unpublished)

Muhammad Suhaimi, Muhd Aliff (2010) TENSILE AND FATIGUE PROPERTIES OF BITUMINOUS MIXTURES INCORPORATING DIFFERENT BITUMEN GRADES. [Final Year Project] (Unpublished)

Justin, Calvin Jones (2010) Ultimate Pile Capacity of Bored Pile and Driven Pile at Ara Damansara Using Bayesian Inverse Method. [Final Year Project] (Unpublished)

Ahmad Afif, Hafizah (2010) Biomarker as Indicator of Aerial Dispersal of Heavy Metal within Remediated and Abandoned Tin Mine Site. [Final Year Project] (Unpublished)

Jamaludin, Jazli Izzuddin (2010) BIOMASS WASTE POTENTIAL AND ITS EFFECTIVE UTILIZATION IN MALAYSIA INCLUDING AN EXPERIMENTALWORK ONWOOD TORREFACTION. [Final Year Project] (Unpublished)

Ahmad, Ahmad Ashraff (2010) Carbon Dioxide Adsorption on Solvothermolyzed Nano-Dolomite. [Final Year Project] (Unpublished)

Zakaria, Zalinawati (2010) CFD Modelling of Bubble-Bubble Coalescence. [Final Year Project] (Unpublished)

Kamarudin, Farhana (2010) C02 Removal By Using Silica Based Membrane. [Final Year Project] (Unpublished)

Muhammad Wira Aiman b Kelana, Muhammad Wira Aiman (2010) An Analytical Study On Maintainability Of Academic Building Elevators. [Final Year Project] (Unpublished)

Kade Danso, Akosua Abongile (2010) Propane Dehydrogenation Wastewater Treatment using Sequencing Batch Reactors. [Final Year Project] (Unpublished)

Mizwa Anuar Bin Mat Tahir, Mizwa Anuar (2010) Mathematical Modelling and Simulation of Petrochemical Processes. [Final Year Project] (Unpublished)

Masmaliza Binti Zolkefli, Masmaliza (2010) An Investigation Into Abrasive Resistance of Aluminum 6063, Stainless Steel 316 And Mild Steel Using Taber Linear Abraser And Taber Rotary Abraser. [Final Year Project] (Unpublished)

Xi Yi, Chin (2010) Applieation of Swirling fluidized bed in Converting Bio oil to Gasoline. [Final Year Project] (Unpublished)

Shuib, Amir Safwan (2010) Effect ofEOR Surfactant on Reservoir Rock Wettability. [Final Year Project] (Unpublished)

Salehudin, Mohd Taofiq (2010) High Seismic Energy. [Final Year Project] (Unpublished)

Sudin, Mohd Nor Azlan (2010) Study on Effect of Nanosilica Sand Addition on Physicaland Mechanical Properties of Thermoplastic. [Final Year Project] (Unpublished)

ZULKIFL Y, ZULHASRlL (2010) Characterization of Thermal and Mechanical Properties of Polypropylene/Polycarbonate/PP-g-MA Blends. [Final Year Project] (Unpublished)

Shasindran , Shanmugam (2010) Study, Design And Analysis OfH2 Gas Actuated Pneumatic Artificial Muscle Using Metal Hydride as Gas Storage Medium. [Final Year Project] (Unpublished)

Ali, Saufi (2010) Numerical Study on the 3-D Flow of Airfoil-Flat Plate Combination with Gap. [Final Year Project] (Unpublished)

Muhammad Azizul Hikmi Bin Fouzi, Muhammad Azizul Hikmi (2010) Decomposition Of Oil Palm Wastes By Using Hot Compressed Water. [Final Year Project] (Unpublished)

Norhana Mohd Aripin, Norhana (2010) Study On The Flow Characteristic On A Bluff Body Around Circular Cylinder. [Final Year Project] (Unpublished)

Matome, Thabiso Frans Matome (2010) Aggregate Grading Analysis Using the Bailey Method of Gradation Selection. [Final Year Project] (Unpublished)

Mohd Nasir, Muhammad Nazif (2010) An Analytical Study of the Maintainability of Academic Building Air Conditioning System. [Final Year Project] (Unpublished)

Hamid, Ashiran (2010) Dynamic Loading Analysis ofthe Telescopic Jetty Gangway. [Final Year Project] (Unpublished)

Herman, Angga Pratama (2010) Physical and Chemical Properties of Carbonaceous Shale and Their By= Product along Seputeh- Datu Gajah New Road. [Final Year Project] (Unpublished)

Nazir Deen, Muneer Ahmad (2010) Phase Separation of Methane and C01 using Pressure and Temperature Manipulation. [Final Year Project] (Unpublished)

Bastamam, Nor Amalina (2010) Simulation of Dynamics of Heat Exchangers. [Final Year Project] (Unpublished)

Mohamad Nor, Khairul Fahmi (2010) Simulation of Heat Exchanger under Fouled Conditions. [Final Year Project] (Unpublished)

Wei, Nancy Hii Zhun (2010) Study of Operation of Cost Items in LNG Plant. [Final Year Project] (Unpublished)

Muhammad, Mohd Ros Asmawi (2010) Superstructure Optimization of Naphtha Processing System with Environmental Considerations. [Final Year Project] (Unpublished)

Lee , Kok Hock (2010) Synthesis ofintegrated Bio-Refinery. [Final Year Project] (Unpublished)

Salamat, Leonard Ulai (2010) The Influence of Anthropogenic Activity on Heavy Metal Content of Soils in Industrial and non-Industrial Areas. [Final Year Project] (Unpublished)

Jasmi, Farahiyah (2010) Thermal Stability and Heat Capacity Characterization of 1 ,6-Bis(Trioctyiphosphonium-1-yi)Decane Chloride. [Final Year Project] (Unpublished)

Mohamad Yusof, Nordiana (2010) Tracking tbe Origin of Crude Samples. [Final Year Project] (Unpublished)

Sekhon, Ajitpal Singh (2010) Absorber Hydraulies Modifieation for Zero-Foaming ofMDEA Solutions. [Final Year Project] (Unpublished)

Sekhon, Ajitpal Singh (2010) Absorber Hydraulies Modifieation for Zero-Foaming ofMDEA Solutions. [Final Year Project] (Unpublished)

CHAN, CHOON HOONG (2010) Batch Scheduling Using Matrix Approach Under Supply Change. [Final Year Project] (Unpublished)

Othman, Mohammad Saifullah (2010) Development of Carbon Molecular Sieve for Gas Separation. [Final Year Project] (Unpublished)

ABO RAHMAN, SYAZWAN (2010) Doping of Titanium Dioxide with Zirconia for Application of Dye Sensitized Solar Cell. [Final Year Project] (Unpublished)

Dionysius Asai, Crescentia Estrall (2010) Effect of Hydrofluoric Acid on Well Cement during Acidizing. [Final Year Project] (Unpublished)

Abd Wahab, Mohd Elmie Farhan (2010) EVALUATION STUDY ABOUT SYNTHETIC NATURAL GAS. [Final Year Project] (Unpublished)

KAH KHENG, LIM (2010) EXPERIMENTAL STUDY ON OIL WELL CEMENT RESISTANCE TOWARDS HYDROCHCLORIC ACID ATTACK. [Final Year Project] (Unpublished)

MOHO AMADZUN, MOHO HAFIZ (2010) Extraction of Ca2+ from dodecane using 1-bu tyl-3-methylimidazolium octylsulfate. [Final Year Project] (Unpublished)

Omar, Hasliza (2010) A Study on Highway Guardrail Improvement. [Final Year Project] (Unpublished)

Ajitpal Singh, Sekhon (2010) Absorber Hydraulics Modification for Zero-Foaming of MDEA Solutions. [Final Year Project] (Unpublished)

Wan Amat, Wan Norizan (2010) ANALYSIS OF BOILER TUBE LEAKAGE BY USING ARTIFICIAL NEURAL NETWORK. [Final Year Project] (Unpublished)

Nik Zunoh, Nik Nur Intan lzura (2010) Assessment of Flammability and Explosion Potential of Waste from Industries. [Final Year Project] (Unpublished)

Aziz, Istiazah (2010) Carbon Dioxide (CO2) Solubility in New Synthesized Ionic Liquid, 1,10-bis (trioctylphosphonium-1-yl) decane dioctylsulfosuccinate. [Final Year Project] (Unpublished)

Mohd Farid, Nor Farhani (2010) DEVELOPMENT OF A GAS-BASED APPLICATION FOR FIRE MODELING IN THE PROCESS INDUSTRIES. [Final Year Project] (Unpublished)

Zainudin, Mohd. Fahmey (2010) Effect of Hydrodynamic Coefficients on Triangular Tension Leg Platform (TLP) Responses. [Final Year Project] (Unpublished)

Nhlapo, Daniel (2010) A Superstructure-Based Mixed-Integer Linear Optimization for Sequencing of Processes for Olefins Production. [Final Year Project] (Unpublished)

Tan, Melvin Zi Hern (2010) Batch Scheduling Using Matrix Approach under Demand Fluctuation. [Final Year Project] (Unpublished)

Gomez, Ivan Sylvester (2010) Biodiesel Production from Algae. [Final Year Project] (Unpublished)

Mohd Ruba'ai, Nur Akissha (2010) Biological, Corrosion and Characterization Analysis of STONVENT for C02 removal. [Final Year Project] (Unpublished)

Erdi, Houno Sougar (2010) Comparison between Different Ways Used for Condensate Recovery from Natural Gas Field. [Final Year Project] (Unpublished)

REBITANIM, NUR ZALIKHA (2010) COMPARISON BETWEEN TWO ALTERNATIVES METHODS OF GRAPHITIC NANOFIBER PURIFICATION. [Final Year Project] (Unpublished)

Osman, Muhamad Saifuddin (2010) Development of Carbon Nanotubes/Epoxy Composites. [Final Year Project] (Unpublished)

Mukhtar, Nur lzyan (2010) Development of Nanocellulose from Microcrystalline Cellulose (MCC) via Acid Hydrolysis using Sulfuric Acid (H2S04). [Final Year Project] (Unpublished)

Balakrishnan, Shobana (2010) Development of Soft Sensor for Crude Distillation Unit. [Final Year Project] (Unpublished)

Amat, Muhamad Yusuf (2010) ECONOMIC EVALUATION OF C02 RECOVERY FROM FLUE GAS USING HYDRATES. [Final Year Project] (Unpublished)

Muhammad Adib, Nur Adilah (2010) Experimental Determination of Fouling Characteristics of Malaysian Crude Oil. [Final Year Project] (Unpublished)

Kusmaniirat, Norizaidah (2010) Heavy Metals in bark as an indicator of atmospheric deposition near ex-tin mines in Perak. [Final Year Project] (Unpublished)

Nasib, Kamarulzaman (2010) Kinetic Analysis of the Existing Models of Methanol Steam Reforming for Hydrogen Production. [Final Year Project] (Unpublished)

ROSLI, MOHD NAZARUDIN (2010) MODELLING OF SHOCKWAVE IN CONVERGING-DIVERGING NOZZLE USING SHOCK CAPTURING METHOD. [Final Year Project] (Unpublished)

Mohd Ghazali, Mohd Fahdi (2010) Natural Gas Dehydration Optimization. [Final Year Project] (Unpublished)

Ali, Norizan (2010) OIL SPILL CLEANUP USING NATURAL RECYCLABLE ABSORBENTS. [Final Year Project] (Unpublished)

Ngai Yoong, Foo (2010) Optimization of Water Network Retrofit Design for Petroleum Refineries with Water Reuse, Regeneration, and Recycle Strategies (W3R). [Final Year Project] (Unpublished)

Ismail, Norafidah (2010) Optimization with Integrated Offline Parametric Optimization of Detailed Process Model of an Interceptor Unit for Water Network Synthesis and Retrofit Design. [Final Year Project] (Unpublished)

Eh Suk, Som Phong Wetsandornphong (2010) Fabrication of Ordered Uniform Porous Carbon Material and Its Application in Gas Separation. [Final Year Project] (Unpublished)

Tuan Salim, Tengku Hasnul Hadi (2010) Geochemistry of Geothermal Hotspring in Perak (CWS). [Final Year Project] (Unpublished)

Abd Wahi, Muhammad Aizat (2010) Investigation of Fire and Explosion Accidents in the Drainage Systems Related to Process Industries. [Final Year Project] (Unpublished)

Abd Rahman, Muhammad Izzat (2010) Labuan Coal Characteristic. [Final Year Project] (Unpublished)

Syed Hussin, Shariffah Alawiyah (2010) Liquefaction of dry leaves. [Final Year Project] (Unpublished)

Chin, Kim Foh (2010) Modeling of Wax Precipitation in Crude Oils. [Final Year Project] (Unpublished)

Mokhtar, Suzieana (2010) Photocatalytic Study on Fe/Ti02 for Solar Hydrogen Generation. [Final Year Project] (Unpublished)

RAJAN THIRAN, SIVERANJINI (2010) PREPARATION OF Co/Si02 SPHERICAL MODEL NANOCATALYST USING REVERSE MICROEMULSION METHOD. [Final Year Project] (Unpublished)

Sabidi, Aida Azwana (2010) Simultaneous mixed-integer disjunctive optimization for synthesis of petroleum refinery topology Processing Alternatives for Naphtha Produced from Atmospheric Distillation Unit. [Final Year Project] (Unpublished)

Supenah, Mohd Shafiq (2010) The effect of Temperature, Residence Time and Particle Size on Extraction of Hevea Brasiliensis using n-Hexane as Solvent. [Final Year Project] (Unpublished)

WAN ISMAIL, WAN AHMAD ZIKRI (2010) C02 CORROSION IN OIL AND GAS PIPELINES (Mechanistic Modelling). [Final Year Project] (Submitted)

Rahmat, Abdul Hazim (2010) Improvement of Engine Performance to Reduce Fuel Consumption of a Single Cylinder Spark Ignition Engine. [Final Year Project] (Unpublished)

Nasib, Kamarulzaman (2010) Kinetic Analysis of the Existing Models of Methanol Steam Reforming for Hydrogen Production. [Final Year Project] (Unpublished)

Awang, Atikah (2010) PREPARATION OF Fe/Si02 SPHERICAL MODEL NANOCATALYST USING COLLOIDAL METHOD. [Final Year Project] (Unpublished)

Y aacob, Ahmad Budiman (2010) Production of Biogas using Palm Oil Mill Effluent (POME) in an Anaerobic Digester. [Final Year Project] (Unpublished)

Mohd Nasir, Abdullah Yasin (2010) Photohydrogen Production Using Tandem Cell. [Final Year Project] (Unpublished)

ZHARANI, ERNIE NURAZERA (2010) HYDROGEN STORAGE CHARACTERIZATION OF HYDROTALCITEDERIVED REDUCED MIXED OXIDES. [Final Year Project] (Unpublished)

Qais Abro, Mohammad Amer (2010) Computational Fluid Dynamics study of Airflow through a Car's Radiator. [Final Year Project] (Unpublished)

Nuramalina binti Jaafar, Nuramalina (2010) Study on Performance of Aerobic Composting of Oil Sludge Contaminated Soil Using Different Bulking Agents. [Final Year Project] (Submitted)

Muhammad Fadzli bin Zaudi, Muhammad Fadzli (2010) The Case Study of Gumusut Deepwater Project. [Final Year Project] (Submitted)

Azharul Fitri bin Abdul Nifa, Azharul Fitri (2010) Study of Flash Flood in UTP Academic Complex. [Final Year Project] (Submitted)

Faizal Azfar bin Zulkefli, Faizal Azfar (2010) Tensile and fatigue properties of bituminous mixtures between limestone and recycle concrete aggregates. [Final Year Project] (Submitted)

Lim, Bartlemy (2010) Tensile Strength Capacity of Grout-Filled Tubular Steel. [Final Year Project] (Submitted)

Mohd Faiz Ikhwan bin Abdullah, Nohd Faiz Ikhwan (2010) Roles of mangroves in coastal protection. [Final Year Project] (Submitted)

Yasmin Khamis, Yasmin (2010) Study On Batu Gajah Clay as Drilling Fluid Materials. [Final Year Project] (Submitted)

Caesar Bidal Clement Peter, Caesar Bidal (2010) Rubber mill wastewater treatment using sequence batch Reactor in aerobic condition. [Final Year Project] (Submitted)

Rozaini Binti Ismail, Rozaini (2010) Treatment of landfill leachate using Uv-hydrogen peroxide system in batch process. [Final Year Project] (Submitted)

Mohd Ayub Mohd Yaakob, Mohd Ayub (2010) Effectiveness of low-crested (submerged) breakwater in wave attenuation. [Final Year Project] (Submitted)

Syed Ariff Shah bin Syed Amear, Syed Ariff Shah (2010) Effects of reinforcement on the ultimate strength of tubular Joints of offshore jacket platform. [Final Year Project] (Submitted)

Roshazlin binti Rashid, Roshazlin (2010) Feasibility Study of Using Crumb Rubber as Filler in Noise Barrier Wall. [Final Year Project] (Submitted)

Siti Noreha Bt Che Bahrun, Siti Noreha (2010) Feasibility Study to Produce Sound Barrier Brick Using Crumb Rubber. [Final Year Project] (Submitted)

Preetpal Kaur a/p Ragbir Singh, Preetpal Kaur (2010) Flexural strengthening of beams with large Opening in critical bending zone (static conditions). [Final Year Project] (Submitted)

Mohamad Rezafahmi Bin Mohd Saleh, Mohamad Rezafahmi (2010) Flood Mapping And Flood Damage Estimation Using GIS. [Final Year Project] (Submitted)

Dila Sekarini Binti Md Desa, Dila Sekarini (2010) The Study of Intumescent Fire Retardant Coating by Adding Silica Sand as Filler. [Final Year Project] (Unpublished)

Ashfaq Ghafran bin Abdul Rahman, Ashfaq Ghafran (2010) Evaluation of the Transient Response of a Servo Motor Using MATLAB/Simulink. [Final Year Project] (Unpublished)

Lest Maulada Budiman, Lest Maulada (2010) An experimental study on effect of paraffin as liquid medium in methanol synthesis. [Final Year Project] (Unpublished)

Lee , Teng Hong (2010) VARIABLE SPEED DRIVE FOR THREE-PHASE INDUCTION MOTOR IN COOLING APPLICATIONS. [Final Year Project] (Unpublished)

Nurmelissa Suraya binti Md Ridzuan, Nurmelissa Suraya (2010) Implementation of Neural Network Predictive Controller for a Supersonic Separator. [Final Year Project] (Unpublished)

Muhamad Imran Bin Aziz @ Awang, Muhamad Imran (2010) Partial Stroke Test For Emergency Shutdown Valve Masoneilan: Analysis Of Design And Verification Using Aft Fathom Software. [Final Year Project] (Unpublished)

Muhammad Taufiq Bin Tahreb, Muhammad Taufiq (2010) Performance Of 3-Phase Induction Motor With Active Power Filter. [Final Year Project] (Unpublished)

Mohd Farisfaiz Bin Che Lah, Mohd Farisfaiz (2010) Pattern Recognition Using K-Nearest Neighbors (KNN) Technique. [Final Year Project] (Unpublished)

Nur Mohd Fadzli Bin Nordzi, Nur Mohd Fadzli (2010) Automatic Ceiling Fan Controller Based On Temperature Sensor And Reactivated System. [Final Year Project] (Unpublished)

Muhammad Nur Iman Bin Zahari, Muhammad Nur Iman (2010) Wireless MODBUS for Switchgear Applications. [Final Year Project] (Unpublished)

Alif Imran bin Mahaya, Alif Imran (2010) Survey of method of renewable and alternate energy at consumer level. [Final Year Project] (Unpublished)

Zaw, Thurein (2010) Planning Zigbee Network For Monitoring Application. [Final Year Project] (Unpublished)

Ahmad Syahir bin Sufian, Ahmad Syahir (2010) Motor Condition Monitoring Using Wireless Sensors. [Final Year Project] (Unpublished)

Mohd Afnan bin Othman, Mohd Afnan (2010) Breakdowns Behaviour Of Gas-Filled Cylindrically Shaped Capacitor. [Final Year Project] (Unpublished)

Abdul Fattah Bin Badrol, Abdul Fattah (2010) 1D Modelling Electromagnetic (Em) Waves For Offshore Application. [Final Year Project] (Unpublished)

Mohd Izran Bin Zakaria, Mohd Izran (2010) A Descriptive Analysis Of Capacitance And Voltage For Slaughtered And Non-Slaughtered Meat. [Final Year Project] (Unpublished)

Atirah Binti Azmi, Atirah (2010) Modeling and Design Verification of Partial Stroke Test (PST) plant using HYSYS, and Development of PST Procedure for FISHER Emergency Shutdown (ESD) Valve. [Final Year Project] (Unpublished)

Muhammad Baizuri Bin Ramli, Muhammad Baizuri (2010) Vehicle Speed Control Using Neural Network Predictive Controller. [Final Year Project] (Unpublished)

Nurul Saadah Ghafar, Nurul Saadah (2010) Development Of Sensory Mode Interaction In Haptic System. [Final Year Project] (Unpublished)

Mohd Farouk Bin Mohd Saad, Mohd Farouk (2010) Radio Frequency Energy Harvesting. [Final Year Project] (Unpublished)

Munirah binti Abdul Hamid, Munirah (2010) Ripeness Classification Of Oil Palm Fruit To Ensure Optimum Quantity Of Oil Using Image Processing Techniques. [Final Year Project] (Unpublished)

Haniff Bin Hasan, Haniff (2010) Navigation Coat Using Ultrasonic Sensors For Blind Person. [Final Year Project] (Unpublished)

Muhammad Gaddafi bin Rusli, Muhammad Gaddafi (2010) Twitter-Controlled Microcontroller System For Home Automation. [Final Year Project] (Unpublished)

Razan Binti Azuddin, Razan (2010) Autonomous Electric Vacuum Robot. [Final Year Project] (Unpublished)

Wazirah binti Md Esa, Wazirah (2010) The Implementation And Analysis Of Wide Dynamic Range Imaging Methods. [Final Year Project] (Unpublished)

Mohd Hafizi Bin Kamarudin, Mohd Hafizi (2010) Signal And Image Compression Using Discrete Wavelet Transform. [Final Year Project] (Unpublished)

Mohd Afiq Bin Abu Kassim, Mohd Afiq (2010) Street Light Monitoring System Using Gsm/Gprs Network. [Final Year Project] (Unpublished)

Low, Chee Huey (2010) Augmented Reality Based Indoor Positioning Navigation Tool. [Final Year Project] (Unpublished)

Nor Aisyah binti Ghazali, Nor Aisyah (2010) Systematic Design of Simply Structured Compensator. [Final Year Project] (Unpublished)

Ahmad Afnan bin Yusof, Ahmad Afnan (2010) Mobile Hazard Inspection Robot. [Final Year Project] (Unpublished)

Muhammad Azizi bin Mohd Wahidi, Muhammad Azizi (2010) Analysis on Losses Reduction with Series Capacitor Compensation Application in Distribution Network. [Final Year Project] (Unpublished)

Mohd Firdaus Bin Noordin, Mohd Firdaus (2010) Automatic System For Utility Electrical Fault (Fault Location Detection Using Labview). [Final Year Project] (Unpublished)

Bryan anak Simon Titik, Bryan (2010) Velocity Profile Inside The Pipeline An Analysis For Corrosion Detection. [Final Year Project] (Unpublished)

Yeo Hann, Yeo Hann (2010) Tracking Of Rigid Objects. [Final Year Project] (Unpublished)

Nor Athirah binti Zainal, Nor Athirah (2010) PV Based Solar Insolation Measuring Device. [Final Year Project] (Unpublished)

Najla Fatie Binti Mohamad Sukry, Najla Fatie (2010) Foundation Fieldbus Interoperability Testing (Honeywell). [Final Year Project] (Unpublished)

Ahmad Aliff Irwan Bin Zakaria, Ahmad Aliff (2010) Condition Based Monitoring For Protection System. [Final Year Project] (Unpublished)

Liu, Hing Hin (2010) Autonomous Robot for Detecting Hazardous Material Underground. [Final Year Project] (Unpublished)

Nurfatihah Khalid, Nurfatihah (2010) Design and Analysis of Controller for a Robotic Arm Manipulator via State Space Approach. [Final Year Project] (Unpublished)

Aminuddin Bin Azman, Aminuddin (2010) Partial Stroke Test (Pst) Of Rotork Emergency Shutdown Valve: Analysis And Design Simulation. [Final Year Project] (Unpublished)

Ong , Wen Sher (2010) Wired LAN Door Access Controller With Web-based Interface. [Final Year Project] (Unpublished)

Muhamad Syafiq bin Abd Jalil, Muhamad Syafiq (2010) PLC Plant Process Remote Monitoring And User Friendly Gui Using Labview. [Final Year Project] (Unpublished)

Maryam Khirul Annuar, Maryam (2010) Web-Based Scada System For Power System State Estimation. [Final Year Project] (Unpublished)

Khalid Khairulanam bin Mohd Ramli, Khalid Khairulanam (2010) Capacity Study Of Lithium Ion Battery For Handphones. [Final Year Project] (Unpublished)

Noraishah A Razak,, Noraishah (2010) Novel Design For Electrical Fan. [Final Year Project] (Unpublished)

Fara Rozana bt Salikin, Fara Rozana (2010) Analysis Of Properties Of Fatigue Loaded Backbone Discs. [Final Year Project] (Unpublished)

Mohd Nur Amin Bin Hashim, Mohd Nur Amin (2010) Signal And Image De-Noising Using Discrete Wavelet Transform Basis Function. [Final Year Project] (Unpublished)

Nurzafirah binti Khalid, Nurzafirah (2010) Portable Security System. [Final Year Project] (Unpublished)

Syazana binti Hasan Nawawi, Syazana (2010) Remote Monitoring Of Vital Signs. [Final Year Project] (Unpublished)

Muhammad Syazwan Bin Baharuddin, Muhammad Syazwan (2010) Automatic Traffic Volume Census Using Video. [Final Year Project] (Unpublished)

Mohd Fikri Bin Ghazali, Mohd Fikri (2010) Intelligent On-Grid Solar System. [Final Year Project] (Unpublished)

Zul Zarif Bin Sharkawi, Zul Zarif (2010) Intelligent Street Light Monitoring System Using Wireless Sensor Network. [Final Year Project] (Unpublished)

Zafirah Syaza binti Abdul Hadi Sabri, Zafirah Syaza (2010) Water Level Monitoring Using Wireless Sensor. [Final Year Project] (Unpublished)

Sharul Shafiq Bin Abd Aziz, Sharul Shafiq (2010) Small Wind Turbine. [Final Year Project] (Unpublished)

Mohd Hanafi bin Mustaffa, Mohd Hanafi (2010) Diabetic Foot Detector. [Final Year Project] (Unpublished)

Amira Farhana binti Shukari, Amira Farhana (2010) Modeling And Design Verification Of Partial Stroke Test (Pst) Plant Using Hysys And Development Of Pst Procedure For Metso Neles Emergency Shutdown Valve. [Final Year Project] (Unpublished)

Muhammad Waffiudin Bin Ab Aziz, Muhammad Waffiudin (2010) Regenerative Braking Concept In Ceiling Fan. [Final Year Project] (Unpublished)

Majda Bakheit Obaid, Majda Bakheit Obaid (2010) Identify Time varying Concentration of CSTR System Using B-Spline Network. [Final Year Project] (Unpublished)

Samer Sherif Kassem, Samer Sherif (2010) Adaptive MLP Network Reference Model for Controlling Flow of Split Level Coupled Tank. [Final Year Project] (Unpublished)

Aida Yanti Oredi, Aida Yanti (2010) Fuzzy Logic Control For Three Phase Shunt Active Power Filter (Modeling And Simulation). [Final Year Project] (Unpublished)

Zainol Amir Hafizuddin bin Zainol Abidin, Zainol Amir Hafizuddin (2010) Car Key Lock Reminder. [Final Year Project] (Unpublished)

Nurdiana binti Zainal, Nurdiana (2010) Air Knife Drying System Application In Removing Pesticides On The Skin Of Fruit. [Final Year Project] (Unpublished)

Nurdiyana Binti Aziz, Nurdiyana (2010) Driver Fatigue Accident Prevention Using Eye Blink Sensor. [Final Year Project] (Unpublished)

Abdul Hadi bin Saaidin, Abdul Hadi (2010) Study On Statistical Model For Defect Count In Control System. [Final Year Project] (Unpublished)

Sholleh Cahyoadi Bin Suparno, Sholleh Cahyoadi (2010) Qibla And Prayer Time Finder Utilizing Global Positioning System (Gps) And Digital Compass. [Final Year Project] (Unpublished)

Mohd Syafiq bin Abas, Mohd Syafiq (2010) Signal Processing Method for Measuring the Amount of Active Part Displacement Inside Electrical Appliances. [Final Year Project] (Unpublished)

Muhammad Hakimi b Abdullah Zamawi, Muhammad Hakimi (2010) Study Of Mathematical Modeling Of Control System For Continuous Stirred Tank Reactor. [Final Year Project] (Unpublished)

Mohamed Afif bin Che Mohamed Rus, Mohamed Afif (2010) Multi-Touch. [Final Year Project] (Unpublished)

Amir Faiz Bin Ab Malik, Amir Faiz (2010) Probabilistic Circuit Architecture Using Statistical Learning. [Final Year Project] (Unpublished)

Mohd Fikri Bin Baharuddin, Mohd Fikri (2010) Bézier Method For Image Processing. [Final Year Project] (Unpublished)

Mohd Hafifi Bin Mohd Zain, Mohd Hafifi (2010) Simple And Safe Epileptic Seizures Monitoring System With Alarm. [Final Year Project] (Unpublished)

Yoganathan Gonasagran, Yoganathan (2010) Design And Analysis Of Controller For A Coupled Tank System Via State Space Approach. [Final Year Project] (Unpublished)

Matemeke Edwinah Maredi, Matemeke Edwinah Maredi (2010) Comparison of Transmission Loss Allocation Methods and Prediction of Losses in Deregulated Power Systems. [Final Year Project] (Unpublished)

Saifuddin bin Abdul Labeb, Saifuddin (2010) Highway Power Harvester. [Final Year Project] (Unpublished)

Attaullah Dahar, Attaullah (2010) Design And Analysis Of Controller For A Continuos Stirred Tank Reactor Via State Space Approach. [Final Year Project] (Unpublished)

Mohammad bin Nor Akmal, Mohammad (2010) Effect of pretension on triangular tension leg platform (TLP) responses. [Final Year Project] (Unpublished)

Nor Hafizah Binti Tajudin, Nor Hafizah (2010) Effects of curing regime and bunders on polymeric concrete. [Final Year Project] (Unpublished)

Nurfisah Binti Shamsuddin, Nurfisah (2010) ECO-drainage towards sustainable urban environment. [Final Year Project] (Unpublished)

Israel Yohannes Bayou, Israel Yohannes Bayou (2010) Color Detection Using Artificial Retina. [Final Year Project] (Unpublished)

Mohd Afiq Syafiq b Md Noor, Mohd Afiq Syafiq (2010) Foldable and transportable disaster relief shelters. [Final Year Project] (Unpublished)

Ahmad Syafri Bin Abdullah, Ahmad Syafri (2010) Green building index malaysia-qualitative survey on vernacular housing type in malaysia. [Final Year Project] (Unpublished)

Mohamad Farhan b Said, Mohamad Farhan (2010) Hydrodynamic analysis on semi-submersible playform. [Final Year Project] (Unpublished)

Mohd. Fahmey Bin Zainudin, Mohd. Fahmey (2010) Effect of hydrodrnamic coefficients on triangular tension leg platform responses. [Final Year Project] (Unpublished)

Justin, Calvin Jones (2010) Ultimate pile capacity of bored pile and drivenpile at ara damansara using bayesian inverse menthod. [Final Year Project] (Unpublished)

Abang Mohamad Zayd bin Abang Othman, Abang Mohamad Zayd (2010) Dynamic responses of mini-TLP (seastar). [Final Year Project] (Unpublished)

Adilah Binti Mohd Zawawi, Adilah (2010) Hydration characteristic of mirha in normal and foamed concretes. [Final Year Project] (Unpublished)

Nur Dalila Bt Alias, Nur Dalila (2010) Hydrodynamic analysis of spar platform subjected to PM spectrum wave. [Final Year Project] (Unpublished)

Siti Kholijah Binti Abdul Ghaffar, Siti Kholijah (2010) Motion responses of FPSO subjected to P-M wave spectrum. [Final Year Project] (Unpublished)

Siti Dhamina bt Muhamad Fadzil, Siti Dhamina (2010) Occupational safety and health management system for universiti teknologi petronas sewage treatment plant. [Final Year Project] (Unpublished)

Aisyah Safiyah binti Yob Sa'ed, Aisyah Safiyah (2010) Operational characteristics of city bus services in ipoh route-ipoh-bercham. [Final Year Project] (Unpublished)

Ahmad Badruzzaman B Ahmad Sallehim, Ahmad Badruzzaman (2010) Carbon Nanotube Transmitter-Receiver System For Hydrocarbon Exploration. [Final Year Project] (Unpublished)

Faizatul Khasanah Sugeng, Faizatul Khasanah (2010) TWO PHASE FLOW USING ELECTRICAL TOMOGRAPHY. [Final Year Project] (Unpublished)

Atikah Bt. Mohd. Jehan Zaib, Atikah (2010) Study of Waste MDEA Characteristics through Neutralization with Caustic. [Final Year Project] (Unpublished)

Munawar b Abdul Hamid, MUNAWAR (2010) Biodegradibility Studies of Some Functionalized Imidazolium Ionic Liquids. [Final Year Project] (Unpublished)

Mohd Ariff Bin Mohd Tahir, Mohd Ariff (2010) Comparative Study of Polyurea and Epoxy Protective Coating via Salt Spray. [Final Year Project] (Unpublished)

Ahmad Farhan Iberahim, Ahmad Farhan (2010) Adaesogn Of Retractable Spread Breakers. [Final Year Project] (Unpublished)

Abd Malik b Abdullah, Abd Malik (2010) Correlation of Electrical Resistivity and Mackintosh Probe. [Final Year Project] (Unpublished)

Ahmad Saffian Bin Ahmad Husni, Ahmad Saffian (2010) Basin Modelling Using GIS. [Final Year Project] (Unpublished)

Aimran Bin Abd Hamid, Aimran (2010) Ammonia and Nitrate Removal in Refinery Wastewater using Aerobic Treatment Systems. [Final Year Project] (Unpublished)

Azlina Binti Aminulla, Azlina (2010) DEVELOPMENT & STABILITY OF COASTAL SAND SPIT. [Final Year Project] (Unpublished)

Sia , Benny Wan Fung (2010) 3D Reconstruction for Simultaneous Localisation and Mapping System (SLAM) in Robotics using Webcam Images. [Final Year Project] (Unpublished)

Duong Vannak, Duong Vannak (2010) Comparative Study Of A Low Rise Building Design Using Ec2 And Bs8110. [Final Year Project] (Unpublished)

Eeo , Ai Ting (2010) An Fpga-Based Reconfigurable Digital Chip Tester. [Final Year Project] (Unpublished)

TAN , SHWU FEI (2010) Word And Speaker Recognition System. [Final Year Project] (Unpublished)

Mohd Khairul Anuar Bin Zainal Abidin, Mohd Khairul Anuar (2010) The Effect of Resin Viscosity in Vacuum Infusion Process. [Final Year Project] (Unpublished)

Farhana Binti Abd Lahin, Farhana (2010) Application of Anaerobic Baffled Reactor (ABR) for Polishing of Treated Palm Oil Mill Effluent (POME). [Final Year Project] (Unpublished)

Fariz bin Adnan, Fariz (2010) An Industry Survey of Production Rates for Substructure Works. [Final Year Project] (Unpublished)

Mohanad Said Abdel Salam, Mohanad Said Abdel Salam (2010) Micro Aerial vehicle: Experimental Aerodynamics optimization. [Final Year Project] (Unpublished)

Fauso Gulamussen Samade, Fauso Samade (2010) Comparison of Structural System for 300m Tall Buildings in High Wind Areas, Such as KLCC, Kuala Lumpur. [Final Year Project] (Unpublished)

Harpreet Kaur A/P Dalgit Singh, Harpreet Kaur (2010) Application of Remote Sensing Images for Analysis of Coastline Changes. [Final Year Project] (Unpublished)

Muhammad Syukri bin Seam@Sa’im, Muhammad Syukri (2010) Study Into the Effect of Using Crude Palm Oil (CPO) as Cutting Fluid on the Tool Wear and Chip Formation During Milling Operations. [Final Year Project] (Unpublished)

Intan Mastura Bt. Mohamad Azmi, Intan Mastura (2010) Assessment of the EPA-SWMM Software for Urban Stormwater Management Manual (MSMA) Requirement. [Final Year Project] (Unpublished)

Khairul Azri bin Ramli, Khairul Azri (2010) Analysis of Stone Matrix and Compaction of Asphaltic Concrete. [Final Year Project] (Unpublished)

NATASHA AZREEN BT MOHD KAMARUDDIN, NATASHA AZREEN (2010) An Integrated Blood Pressure Monitoring System With Wireless Capabilities. [Final Year Project] (Unpublished)

Khyruzihan Bin Azhar, Khyruzihan (2010) Correlation Between Electrical Resistivity And Soil Water Content. [Final Year Project] (Unpublished)

Nabilah Binti Amir Hamzah, Nabilah (2010) Study of Plain Dent on Seamless Mild Steel Pipe. [Final Year Project] (Unpublished)

Mior Khairul Azinil Bin Mior Rarili, Mior Khairul Azinil (2010) Correlation of Electrical Resistivity with Different Condition of the Soil. [Final Year Project] (Unpublished)

Mohammad Firdaus Bin Kamaruzaman, Mohammad Firdaus (2010) UTP Hostel Energy Saving through Electricity Consumption Control. [Final Year Project] (Unpublished)

Muhammad Aminuddin Zulkefli, Muhammad Aminuddin (2010) Development of Coastal Protection Scheine Database for Peninsular Malaysia. [Final Year Project] (Unpublished)

Mohd Azraf Bin Ramlan, Mohd Azraf (2010) Development of Production Rate Database for Superstructure by Direct Observation. [Final Year Project] (Unpublished)

Mohd Nor Firdaus Bin Mohd Adnan, Mohd Nor Firdaus (2010) 3D Crane Control. [Final Year Project] (Unpublished)

Muhamad Nazim bin Mohamad Nawi, Muhamad Nazim (2010) Development of Production Rates Database for Civil Works of Substructure Activities. [Final Year Project] (Unpublished)

Mohd Burhanuddin Bin Ruslan, Mohd Burhanuddin (2010) Comparative Study on Environmental Impacts of Grocery Bags through LCA. [Final Year Project] (Unpublished)

Mariam Charliza binti Abdullah, Mariam Charliza (2010) Comparison on Effects of Water on Adhesion Properties of Surface Coating Polyurea and Epoxy. [Final Year Project] (Unpublished)

Anas Hakimi bin Kori, Anas Hakimi (2010) Three Dimensional Stress Analysis in a Steam Turbine Blade. [Final Year Project] (Unpublished)

Aliya Binti Muhamad, Aliya (2010) The Effect of Expandable Graphite and Zinc Borate on Performance of Intumescent Fire Retardant Coating. [Final Year Project] (Unpublished)

Omer Awad Elbasha Mohamed Ahmed, Omer Awad Elbasha (2010) Construction Of Bunds For Oil Storage Tanks. [Final Year Project] (Unpublished)

Rosyimah binti Abd Amin, Rosyimah (2010) Self-Balancing Robot. [Final Year Project] (Unpublished)

Muhammad Hafizi bin Ahmed, Muhammad Hafizi (2010) Magnetic Reset Circuit Design for Zero Induced Effects in Linear Transformer Applications. [Final Year Project] (Unpublished)

Nasrul Izzad B Ideris, Nasrul Izzad (2010) Prediction of Pile Capacity using Artificial Neural Network. [Final Year Project] (Unpublished)

Yam , Chee Wai (2010) Stochastic Programming with Economic and Operational Risk Management in Petroleum Refinery Planning under Uncertainty. [Final Year Project] (Unpublished)

Ruzaidi Bin Ab. Aziz, Ruzaidi (2010) Bitumen Filler System for Different Grades of Bitumen. [Final Year Project] (Unpublished)

Ahmad Nadim Bin Faisal, Ahmad Nadim (2010) Effect of Surface Roughness to the Adhesion Strength of Polyurea. [Final Year Project] (Unpublished)

Nur Syazwani Bt Abdul Samat, Nur Syazwani (2010) A Study To Avoid Total Blackout in UTP Whenever GDC Supply Is ParalleL With TNB. [Final Year Project] (Unpublished)

Nur Sahira binti Dusuki, Nur Sahira (2010) Design of Two Stage Charging System for Thermal Energy Storage (TES) Tank for GDC UTP. [Final Year Project] (Unpublished)

Adam Hareezi Abdul Aziz, Adam Hareezi (2010) Three-Dimensional (3D) Reconstruction of Microstructures via Serial Sectioning. [Final Year Project] (Unpublished)

Hamzah Mohamad, Hamzah (2010) PC Based Sweep Signal Generator. [Final Year Project] (Unpublished)

Eva Sarah Bt Zakaria, Eva Sarah (2010) Combustion of Diesel and Syngas Mixtures in a 2-Stroke Diesel Engine. [Final Year Project] (Unpublished)

Aina Liyana Bt Abu Bakar, Aina Liyana (2010) Study on the Flow Characteristics of a Bluff Body Cut From a Square Cylinder. [Final Year Project] (Unpublished)

Shahrul Fazry Bin Abdullah Sani, Shahrul Fazry (2010) Critical Success Factors (CSFs) of Contractor in Industrialised Building System (IBS) Implementation. [Final Year Project] (Unpublished)

Ahmad Syazwan Bin Samsuddin, Ahmad Syazwan (2010) Void Content Analysis of a Polymer Composite Manufactured via Resin Infusion Process. [Final Year Project] (Unpublished)

Akosua Abongile Kade Danso, Akosua Abongile (2010) Propane Dehydrogenation Wastewater Treatment using Sequencing Batch Reactors. [Final Year Project] (Unpublished)

Mohd Faiz Bin Mohd Yaacob, Mohd Faiz (2010) Response of a Semi-sub Platform to Environmental Load. [Final Year Project] (Unpublished)

Chyrina binti Mohamed Zamri, Chyrina (2010) Response of a Truss SPAR Offshore Platform to Environmental Loads (case study : Kikeh Field at Sabah Waters). [Final Year Project] (Unpublished)

Mohd Syazwan bin Ramlan, Mohd Syazwan (2010) Response of a SPAR Offshore Platform to Wave Action- An Experimental Study. [Final Year Project] (Unpublished)

Raihana Bt Rosli, Raihana (2010) Road Safety Analysis For Ipoh - Lumut Highway Using Geographical Information System. [Final Year Project] (Unpublished)

Mohd Amin Bin Harith, Mohd Amin (2010) Road Safety Analysis on Commuting Route: Ipoh to UTP. [Final Year Project] (Unpublished)

Mohd Faiz Fahmi Bin Abu Bakar, Mohd Faiz Fahmi (2010) Characterization of Spatial Variability of Soil Physical Properties at UTP Campus. [Final Year Project] (Unpublished)

Mohd Yusairi Bin Md Yusof, Mohd Yusairi (2010) Shear Strength Characteristics of Tropical Soil at Universiti Teknologi Petronas Campus. [Final Year Project] (Unpublished)

Kirijaa A/P Ratanarajah, Kirijaa (2010) Shear Strengthening of Beams With Large Opening in Critical Shear Zone(Static Conditions). [Final Year Project] (Unpublished)

Mior Nazif B Mior Zahari, Mior Nazif (2010) Structural Landslide Mitigation Technique. [Final Year Project] (Unpublished)

Muhd Aliff B Muhammad Suhaimi, Muhd Aliff (2010) Tensile and Fatigue Properties of Bituminuos Mixtures Incorporating Different Bitumen Grades. [Final Year Project] (Unpublished)

Muhammad Ikhwan Bin Sabli, Muhammad Ikhwan (2010) Tension Capacity Determination of a Normal Sleeve Anchor. [Final Year Project] (Unpublished)

Nadia Nadzirah Binti Jamil, Nadia Nadzirah (2010) The Effect Of Natural Retarder On Geopolymer Concrete With Different Curing Regime. [Final Year Project] (Unpublished)

Nurul Syazwani Binti Mohamed, Nurul Syazwani (2010) The Effect of Various Fly Ash Content on Geopolymer Concrete with Different Curing Regime. [Final Year Project] (Unpublished)

Munirah Bt A.Jabar, Munirah (2010) The Impact of Wind Loads on Curtain Wall Design. [Final Year Project] (Unpublished)

Ainil Husna Binti Mohd Sharir, Ainil Husna (2010) The Utilization of Abandoned Mining Pond as Retention Pond to Cater Stormwater Runoff. [Final Year Project] (Unpublished)

Ong, Shiou Ting (2010) Assessment of Corrosion in Offshore Structures through Inspection Reports and Experiments. [Final Year Project] (Unpublished)

Chai, Kenneth Chai Hung Zui (2010) Biomimetics in Disaster Relief Structures. [Final Year Project] (Unpublished)

Ngan, Yew Teng (2010) Capacity of Grout- Filled Steel Beam under Flexural Cyclic Load. [Final Year Project] (Unpublished)

Ong , Kee Hui (2010) Determining Punching Shear Strength and Performance of Tubular Joints Models. [Final Year Project] (Unpublished)

Ahmad Badnizzaman B Ahmad Sallehim, Ahmad Badnizzaman (2010) CARBON NANOTUBE TRANSMITTER-RECEIVER SYSTEM FOR HYDROCARBON EXPLORATION. [Final Year Project] (Unpublished)

Azrihan Bin Abdullah, Azrihan (2010) Obstacle Sensing Autonomous Mobile Robot. [Final Year Project] (Unpublished)

Dalila binti Mohamad ldris, Dalila (2010) STUDY OF PARTIAL STROKE TEST FOR METSO NELES EMERGENCY SHUTDOWN VALVE. [Final Year Project] (Unpublished)

Fairoz Nadrah bte Mohd Ikhsan, Fairoz Nadrah (2010) 125 kHz RFID READER DESIGN. [Final Year Project] (Unpublished)

Felipe Nguema Eman Andeme, Felipe Nguema (2010) A PROPOSED LOAD SHEDDING SCHEME FOR EG LNG PLANT. [Final Year Project] (Unpublished)

Hairul Nazmi bin Saleh, Hairul Nazmi (2010) Application of Automatic Speed Reducer System in Vehicle. [Final Year Project] (Unpublished)

Law , Jeffrey Han Ling (2010) AUTONOMOUS ROBOT FOR COLLECTING TENNIS BALL. [Final Year Project] (Unpublished)

Mohd Farizol Fuzmi Bin Mohd Bakhi, Mohd Farizol Fuzmi (2010) 3-Phase Brushless Permanent-Magnet Motor Control for Hybrid Electric Vehicle In-Wheel Motor. [Final Year Project] (Unpublished)

Mohd Rushahidi Bin Khalid, Mohd Rushahidi (2010) APPORTIONING THE TRANSMISSION LOSS IN POWER NETWORK TO INDIVIDUAL LOADS AND GENERATOR. [Final Year Project] (Unpublished)

Mohd Yazid Bin Mohd Yohani, Mohd Yazid (2010) Automated Control For Electrical Appliances By Using RFID. [Final Year Project] (Unpublished)

Muhammad Afiq bin Mohd Sadli, Muhammad Afiq (2010) I MHz PWM Generation Using Intersective Method. [Final Year Project] (Unpublished)

Muhammad Hafiz Bin Amir, Muhammad Hafiz (2010) CANSAT INTEGRATION USING MICROCONTROLLER. [Final Year Project] (Unpublished)

Nik Abdul Aziz bin Nik Mustafa, Nik Abdul Aziz (2010) A Study of Partial Stroke Test for Emergency Shutdown System (ESD) Using Masoneilan Valve. [Final Year Project] (Unpublished)

Nor Haziana Binti Isahak, Nor Haziana (2010) Design and Modeling of a Short-Stroke Linear Permanent Magnet Motor. [Final Year Project] (Unpublished)

Nur Anis Binti Nor Azlan, Nur Anis (2010) Bearing Fault Monitoring System using Acoustic Emission. [Final Year Project] (Unpublished)

Nur Melatee binti Mohd Fauzi, Nur Melatee (2010) Corrosion Monitoring using Radio Frequency Identification. [Final Year Project] (Unpublished)

Nurul Atiqah Mat Ayus, Nurul Atiqah (2010) A Fuzzy Logic Approach in Modeling and Simulation of a Scheduling System for Hospital Admissions Using ARENA® simulation software. [Final Year Project] (Unpublished)

Shanthini S. Selvaraja, Shanthini (2010) Bluetooth Accelerometer Mouse. [Final Year Project] (Unpublished)

Siti Rasyidah binti Syed Rabi'i, Siti Rasyidah (2010) DESIGN AND ANALYSIS OF BRAIN EMOTIONAL LEARNING BASED INTELLIGENT CONTROLLER (BELBIC) FOR TEMPERATURE CONTROL. [Final Year Project] (Unpublished)

Tan , Jia Min (2010) ACCESS CONTROL USING WIRELESS FOR DATA COMMUNICATATION TO DATA TERMINAL. [Final Year Project] (Unpublished)

Zaid Bin Najid, Zaid (2010) A Study of Partial Stroke Testing on FISHER ESD Valve. [Final Year Project] (Unpublished)

Ahmad Aizat b. Azra'i, Ahmad Aizat (2010) Intelligent Controller For Controlling Pressure Gas Plant Using Pi-Fuzzy. [Final Year Project] (Unpublished)

Muhammad Afiq bin Mohd Sadli, Muhammad Afiq (2010) 1 MHz PWM Generation Using Intersective Method. [Final Year Project] (Unpublished)

Mohd Yusri B. Mohd Yusoff, Mohd Yusri (2010) Improvement To Shunt Contactors for External Floating Roof Tank Lightning Protection System. [Final Year Project] (Unpublished)

Ahmad Aliff B Abd Ghani, Ahmad Aliff (2010) Segmentation Of Retinal Vasculature Using Contourlet Enhancement For Early Detection Of Diabetic Retinapthy. [Final Year Project] (Unpublished)

Ahmad Marwan Bin Mah Hassan, Ahmad Marwan (2010) Design and Modelling Long Stroke Linear Permanent Magnet Machine. [Final Year Project] (Unpublished)

Ahmad Firdaus bin Ab Lah, Ahmad Firdaus (2010) System Identification Modeling for Gaseous Pilot Plant. [Final Year Project] (Unpublished)

Ahmad Fuad bin Jamaluddin, Ahmad Fuad (2010) Design Of Linear Generator. [Final Year Project] (Unpublished)

Suriansyah Bin Abdullah, Suriansyah (2010) Verifying The Reliability Of Mathematical Model In Plant Process Control. [Final Year Project] (Unpublished)

Ahmed Fiaz, Ahmed (2010) Real And Reactive Power Flow Tracing In Power Networks. [Final Year Project] (Unpublished)

Anith Safura Binti Azmi, Anith Safura (2010) Tracking Of Class Attendance Using RFID System Integrated With Thumbprint Identification Technology. [Final Year Project] (Unpublished)

Areif Azree Bin Mohd Azahari, Areif Azree (2010) Development And Implementation Of A Fuzzy Programmable Logic Controller. [Final Year Project] (Unpublished)

Chong , Gie Chuan (2010) Lightning Protection and Earthing System in Universiti Teknologi PETRONAS. [Final Year Project] (Unpublished)

Effidz Syufrie bin Muhd. Shukor, Effidz Syufrie (2010) Obstacle Sensing Autonomous Mobile (OSAMO) Robot. [Final Year Project] (Unpublished)

Eisak bin Sagiman, Eisak (2010) Segmentation and Grading of Sinus Images. [Final Year Project] (Unpublished)

Elangeshwaran Pathmanatha, Elangeshwaran (2010) Development And Implementation Of Fuzzy Logic Controller For Flow Control Application. [Final Year Project] (Unpublished)

Mohd Zulhilmie bin Mat Kana, Mohd Zulhilmie (2010) Rural Electrification By Using Solar Photovoltaic Generation System. [Final Year Project] (Unpublished)

Faizatul Khasanah Sugeng, Faizatul (2010) Two Phase Flow By Using Electrical Tomography. [Final Year Project] (Unpublished)

Nizar Bin Abdul Nazer, Nizar (2010) The Impact Of High Resonant Frequency In Inverter Application. [Final Year Project] (Unpublished)

Izzati Farhana binti Ab Aziz, 'Izzati Farhana (2010) Monitoring Lighting System Uisng SCADA. [Final Year Project] (Unpublished)

Nurul Shahida Binti Salleh, Nurul Shahida (2010) Enhanced Oil Recovery Using Em Waves. [Final Year Project] (Unpublished)

Mohd Syafiq Mohamed Osman, Mohd Syafiq (2010) Computerized System For Breast Cancer Monitoring And Grading Of Abnormality In Medical Thermogram. [Final Year Project] (Unpublished)

Fathehah Bt Mohamad Azman, Fathehah (2010) Magnetic Nanoparticles For Enhanced Oil Recovery (Eor) Using Em Methods. [Final Year Project] (Unpublished)

Hafizul Hasni Bin Manab, Hafizul Hasni (2010) Educational Processor. [Final Year Project] (Unpublished)

Hayfa Amira Binti Ahmad Kamal, Hayfa Amira (2010) Electrical Power System Modeling And Simulation Of Universiti Teknologi Petronas Gas District Cooling Plant. [Final Year Project] (Unpublished)

Hoe , Fook Yong (2010) PIC Based Master-Slave Microcontroller Board Development. [Final Year Project] (Unpublished)

Nor Azrimi B Abd Halim, Nor Azrimi (2010) Sensor Based: Gas Leakage Detector. [Final Year Project] (Unpublished)

Ili Nadiah Binti Mhd Nasir, Ili Nadiah (2010) Drugs/ Medicine Inventory With Radio Frequency Identification (Rfid) System. [Final Year Project] (Unpublished)

Izzati Farhana binti Ab Aziz, `Izzati Farhana (2010) Monitoring Lighting system using SCADA. [Final Year Project] (Unpublished)

Rozazilainidawati Binti Hj Ahmad, Rozazilainidawati (2010) Document Tracking Using Radio Frequency Identification (RFID) D’traxx. [Final Year Project] (Unpublished)

Khairul Azhar bin Ishak, Khairul Azhar (2010) Experimental Verification Of A Diode-Clamped Resonant Gate Driver Network. [Final Year Project] (Unpublished)

NOORAZLIZA BINTI SULAIMAN, NOORAZLIZA (2010) Electricity Forecasting For The Small Scale Power System Using Artificial Neural Network. [Final Year Project] (Unpublished)

Khairul Azri Bin Jamaluddin, Khairul Azri (2010) Design, Develop And Perform Robustness Test Of Analyzer2 ver2. [Final Year Project] (Unpublished)

Lee , Jun Jia (2010) Smart Automatic Power Factor Correction Device. [Final Year Project] (Unpublished)

Sam Mun Tek, Sam Mun Tek (2010) Development of User-Interface Software Program for Double Weight Code Family for OCDMA. [Final Year Project] (Unpublished)

Lee , Tze Yang (2010) Economic Analysis of a Deregulated Power System Using the Proportional Tracing Method. [Final Year Project] (Unpublished)

Liew , Wui Keong (2010) Sustainable Development (SD) Design of an Electrical System A Case Study of Asiaflex Products Sdn B lid. [Final Year Project] (Unpublished)

Lim , Hwei Ping (2010) Development of a Fault Prediction and Detection System for Analyzer 2ver2. [Final Year Project] (Unpublished)

Liyana binti Hasnul, Liyana (2010) Natural Gas Refueling Technology (Dispenser Controller). [Final Year Project] (Unpublished)

Marziah binti Mahmod, Marziah (2010) Development Of Display System For Ngv Dispenser Panel. [Final Year Project] (Unpublished)

Mohamad Yasser Bin Mohammed Anuar, Mohamad Yasser (2010) Plant Controller Tuning: Investigation of Tuning Method. [Final Year Project] (Unpublished)

Mohd Hissammudin bin Musa, Mohd Hissammudin (2010) Foundation Fieldbus Interoperability Test (FFIT). [Final Year Project] (Unpublished)

Mohamad Zulfadhli Bin Mohamad Idris, Mohamad Zulfadhli (2010) The Effect of Resistive Mediums on the Propagation of Electromagnetic (EM) Wave. [Final Year Project] (Unpublished)

Mohammad Firdaus bin Haris, Mohammad Firdaus (2010) Dual Power Active Rfid Tag. [Final Year Project] (Unpublished)

SITI NOREHAN BINTI JAAFAR, SITI NOREHAN (2010) Characterization of Alumina and Removal of Sulphate Ions in Aqueous Stream Using Alumina Prepared by Precipitation Method. [Final Year Project] (Unpublished)

Mohd Shafiq bin Ramdan, Mohd Shafiq (2010) Removal of Chromium from Aqueous Stream Using Aluminium Oxide (Synthesized by Simple Precipitation Method) as an Adsorbent. [Final Year Project] (Unpublished)

Nur Fatin bte Alias, Nur Fatin (2010) Free Surface Modeling Using CFD: Bubble Bursting. [Final Year Project] (Unpublished)

Noor Aziah binti Othman, Noor Aziah (2010) Effect of Atmosphere and Biomass Form on torrefaction. [Final Year Project] (Unpublished)

Mohd Khairi Bin Mohd Norzian, Mohd Khairi (2010) Clathrate Hydrates in Refrigeration System. [Final Year Project] (Unpublished)

Yasmin Syazwani Binti Yusri, Yasmin Syazwani (2010) Behavior and Toxicity of Phosphonium Based Ionic Liquids. [Final Year Project] (Unpublished)

Aizuddin Alif bin Yusof, Aizuddin Alif (2010) Study Of Chemical and Physical Characteristics Of Bio-oil From EFBs. [Final Year Project] (Unpublished)

CHAI KIAN CHIEW, KIAN CHIEW (2010) Flowsheet Synthesis and Development of Integrated Pressurized Catalytic Fluidized Gasification of Empty Fruit Bunch into Hydrogen. [Final Year Project] (Unpublished)

Erika Goldie Joushua, Erika (2010) Effect of Carbon Dioxide on Oilwell Cement. [Final Year Project] (Unpublished)

Khairunnisa binti Abdul Rapah, Khairunnisa (2010) Separation of Water-Acetone Mixture Using Suitable Entrainer (Simulation). [Final Year Project] (Unpublished)

Nor Muhibbah Binti Mohamed @ Muhammad, Nor Muhibbah (2010) Studies On The Gelation Kinetics Of Silica Sol. [Final Year Project] (Unpublished)

Suliana Binti Abu Bakar, Suliana (2010) Emulsion Stability and Combustion Characteristics Glycerol -Water Mixture. [Final Year Project] (Unpublished)

Nadiah binti Jamil, Nadiah (2010) Conversion of Bio Oil to Biodiesel Using Adsorptive Distillation Approach. [Final Year Project] (Unpublished)

Farhana binti Kamarudin, Farhana (2010) Carbon Dioxide Removal by Using Silica Based Membrane. [Final Year Project] (Unpublished)

Mohd Anis Bin Mohd Shariff, Mohd Anis (2010) Synthesis And Characterization Of Spherical Model Co-Fe Nanocatalyst. [Final Year Project] (Unpublished)

Norkaramina Binti Ab llah, Norkaramina (2010) Design of Contactor Vessel for CO2 absorption from Natural Gas at Reserves using FLUENT. [Final Year Project] (Unpublished)

Wan Mohd Fakhirin Bin Mohamed Hassan, Wan Mohd Fakhirin (2010) Utilizing Layer of Protection Analysis (LOPA) in Verification of Safety Integrity Level (SIL) of Instrumented System. [Final Year Project] (Unpublished)

Muhammad Syuwari bin Mohd Hussa, Muhammad Syuwari (2010) Development of Chemical Reactivity Matrix Databases for Industrial Applications. [Final Year Project] (Unpublished)

Norazima Binti Mat Zaidi, Norazima (2010) Development of Key Performance Indicators for Process Safety Management System. [Final Year Project] (Unpublished)

Izzati Zahidah binti Othman, ‘Izzati Zahidah (2010) Fate and Effect of Hydroxyl Functionalized Imidazolium Ionic Liquids on Biological Systems. [Final Year Project] (Unpublished)

Siti Nurain Roseli, Siti Nurain (2010) Treatment of Soil Contaminated with Ionic Liquids. [Final Year Project] (Unpublished)

Nurul Syafiqin Binti Mohamad Shah, Nurul Syafiqin (2010) A Study Of Nickel And Cadmium Adsorption Using Granulated Charcoal Activated Carbon (Gcac). [Final Year Project] (Unpublished)

Den Agustino Bin Fakhrol, Den Agustino (2010) Development of integrated approach employing Fe/TiO2-[BMIM]FeCl4 system for sulfur removal from model oil. [Final Year Project] (Unpublished)

Noree Stirak, Noree (2010) Modeling and Predictive Control of Carbon Dioxide Removal Unit by Aqueous Alkanolamine. [Final Year Project] (Unpublished)

Nursyazwani Binti Zainal Abidin, Nursyazwani (2010) Preparation And Characterization Of Co-Fe/Al2o3 Catalyst For Steam Reforming Of Ethanol. [Final Year Project] (Unpublished)

Mohd Saiful Bin Mohd Sofian, Mohd Saiful (2010) The Solubility Behavior during Transesterification Of Triglyceride. [Final Year Project] (Unpublished)

Wan Norsuria bt Wan Shukri, Wan Norsuria (2010) Studies on Physical and Chemical Properties of Bio Oil During Storage. [Final Year Project] (Unpublished)

Mohamad Saiful Bin Hamid, Mohamad Saiful (2010) Removal of Lead From Aqueous Stream Using Aluminium Oxide (synthesized by simple precipitation method) as an Adsorbent. [Final Year Project] (Unpublished)

Muhammad Zulhaziman Bin Mat Salleh, Muhammad Zulhaziman (2010) Fleat Exchanger Fouling Mitigation By Biending and ultrasonic. [Final Year Project] (Unpublished)

Nurulizzah Ishak, Nurulizzah (2010) Synthesis and Characterization of Nano Silica from Local Siliceous Sand. [Final Year Project] (Unpublished)

Muhammad Fitri Aziz Bin Addenan, Muhammad Fitri Aziz (2010) Heat Integration Study of Biomass Gasification Plant for Hydrogen Production. [Final Year Project] (Unpublished)

Norazlina Binti Md Yaacob, Norazlina (2010) Optimization of Iron (III) Oxide Catalyst Using Taguchi Method for Development of Carbon Nanofiber. [Final Year Project] (Unpublished)

Amzar bin Abdul Aziz, Amzar (2010) Dehydration of Natural Gas Via High Centrifugal Forces: Effect of Water Loading on Separation Efficiency. [Final Year Project] (Unpublished)

Mohamad Izwan Bin Ramly, Mohamad Izwan (2010) Separation of Nitrogen from Natural Gas using Inorganic Membrane. [Final Year Project] (Unpublished)

Nur Syafina binti Abdul Razak, Nur Syafina (2010) Separation of Rhodium Catalyst in a Homogeneous System by using Nanofiltration. [Final Year Project] (Unpublished)

Nor Amizah Binti Azid, Nor Amizah (2010) Preparation and Characterization of Co-Ni/Al2O3 Catalyst for Steam Reforming of Acetic Acid. [Final Year Project] (Unpublished)

Mohd Syahiran Bin Mohd Saufi, Mohd Syahiran (2010) Influence of Vehicular Emission on Road Dust in Urban and Rural Roads. [Final Year Project] (Unpublished)

Ahmad Budiman Bin Yaacob, Ahmad Budiman (2010) Production of Biogas using Palm Oil Mill Effluent (POME) in Anaerobic Digester. [Final Year Project] (Unpublished)

Mohd Sallehuddin Said, Mohd Sallehuddin (2010) Carbon-Carbon Supercapacitor. [Final Year Project] (Unpublished)

MOHAMAD IBRAHIM BIN MOHD ZOLKEPLI, MOHAMAD IBRAHIM (2010) Desulphurization of Model Oil using Immobilized [BMIM]FeCl4 onto Polysulfone (PSF). [Final Year Project] (Unpublished)

Mohd Norshahril Jailani, Mohd Norshahril (2010) The Effects of Chemical Treatment in the Traditional Creation of Peninsular Keris Blade. [Final Year Project] (Unpublished)

Mohamed Afiq Bin Ramli, Mohamed Afiq (2010) Conversion of Bio-oil to Biodiesel through Reactive Distillation Approach. [Final Year Project] (Unpublished)

Syed Faiq Bin Syed Adnan, Syed Faiq (2010) Effect of Thermal Treatment on Composition of Malaysian Biomass. [Final Year Project] (Unpublished)

Atifah Ahmad Yusoff, Atifah (2010) Calcium Removal from Model Oil using Ionic Liquids. [Final Year Project] (Unpublished)

Nguyen Kim Chi, Kim Chi (2010) Risk Assessment and Management for CO2 Transportation Pipelines. [Final Year Project] (Unpublished)

Ainul Yaqin Binti Jamil, Ainul Yaqin (2010) Non Solvent Effect on Polysulfone Membrane for Carbon Dioxide Removal from Natural Gas. [Final Year Project] (Unpublished)

Mohd.Khairul Anuwar Bin Hussin, Mohd.Khairul Anuwar (2010) Gas Separation using Acrylonitrile Butadiene Styrene Membrane. [Final Year Project] (Unpublished)

Nik Ahmad Romzi Bin Nik Abdul Aziz, Nik Ahmad Romzi (2010) Synthesis & Characterization of Zirconia Promoted Cu/ZnO/Al2O3 Catalyst for Methanol Synthesis Via Hydrogenation of CO2. [Final Year Project] (Unpublished)

Zahrini Iffah Binti Abdul Khalid, Zahrini Iffah (2010) Industrial Wastewater Treatment Employing Surface Modified Activated Carbon. [Final Year Project] (Unpublished)

Muhd Azimey Bin Mamat, Muhd Azimey (2010) Electrochemical Window of 1-Butyl-3-Methylimidazolium Hexafluorophosphate. [Final Year Project] (Unpublished)

Siti Sahirah Noordin, Siti Sahirah (2010) Superstructure Optimization Approach for Optimal Design of a Petroleum Refinery Topology with Heat Integration. [Final Year Project] (Unpublished)

Zeelawati Binti Razak, Zeelawati (2010) Simulation of Petcoke Gasification in Fluidized Bed Gasifier. [Final Year Project] (Unpublished)

Shanmugam, Nisha Nanthini (2010) Effect of Metal Promoter on the Property of Co/SiO2 Nanocatalyst. [Final Year Project] (Unpublished)

NURSYIEFFA BINTI MOHD NOOR, NURSYIEFFA (2010) Physical Properties Analysis of Amine Based Solvent (STONVENT). [Final Year Project] (Unpublished)

Nurhamizah Binti Ismail, Nurhamizah (2010) Kinetics Modelling of CO2 Reactive Absorption from Natural Gas using MATLAB. [Final Year Project] (Unpublished)

Nur Zailie B. Ali Hassan, Nur Zailie (2010) Hydrogen Production Via Aqueous Phase Reforming Of Glucose. [Final Year Project] (Unpublished)

Azman bin Azumi, Azman (2010) Synthesis of zinc titanate for Dye Sensitized Solar Cell (DSSC) application. [Final Year Project] (Unpublished)

Aaron Subash George, Aaron (2010) Treatment of Acidic Soil Contributed By Carbonaceous Shale. [Final Year Project] (Unpublished)

Ahmad Fikree bin Kamil, Ahmad Fikree (2010) Removal of Oil and Grease from Refinery Desalter Effluent Using Carbon Derived from Agricultural Wastes. [Final Year Project] (Unpublished)

Muhammad Afiq Ziekry Bin Mohd Shukry, Muhammad Afiq Ziekry (2010) Identification of potentially toxic elements in crops and aquatic life at former tin mine sites in Perak. [Final Year Project] (Unpublished)

Abdul Adzim Ismail, Abdul Adzim (2010) Optimization of Nano sized NiO Catalyst. [Final Year Project] (Unpublished)

Mohd Hafizudin Bin Rozali, Mohd Hafizudin (2010) The Study of the Effect of Impeller Shape and Location on the Mixing Behaviour Using CFD Modeling. [Final Year Project] (Unpublished)

Nur Hidayah bt Mansor, Nur Hidayah (2010) Inherent Safety Cost Index (Isci) For Preliminary Process Design. [Final Year Project] (Unpublished)

Mohd Khairul Faqih bin Mohd Khir, Mohd Khairul Faqih (2010) Development of Solar Based Battery Charging System for Electric Cars. [Final Year Project] (Unpublished)

Mohd Khairul Hanafi Bin Mhd Jamin, Mohd Khairul Hanafi (2010) Study Of IGBT Drive For Three Phase Load. [Final Year Project] (Unpublished)

Mohd Yusri B. Mohd Yusoff, Mohd Yusri (2010) Improvement To Shunt Contactors For External Floating Roof Tank Lightning Protection System. [Final Year Project] (Unpublished)

Mohd Zulfadhli Bin Mayzan, Mohd Zulfadhli (2010) Development of Hybrid Active-Passive Solar Lighting System. [Final Year Project] (Unpublished)

Muhammad Amin Bin Ab Latif, Muhammad Amin (2010) The Experimental Analysis of Predictive Control Scheme in High Frequency Gate Driver Design. [Final Year Project] (Unpublished)

Muhammad Asraf bin Abdul Rahim, Muhammad Asraf (2010) Modeling of Primary Reformer Tube Metal Temperature (TMT). [Final Year Project] (Unpublished)

Nguyen Ngoc Thanh Phuong, Nguyen Ngoc (2010) Development of a Planning and Analysis Tool for Wireless Mesh Network. [Final Year Project] (Unpublished)

Muhammad Bin Kamarul Baharin, Muhammad (2010) Foundation Fieldbus Interoperability Testing (Yokogawa & Smar). [Final Year Project] (Unpublished)

Muhammad Firdaus B Abdul Halim, Muhammad Firdaus (2010) Electrical Capacitance Tomography Design And Analysis For Bubble Flow Regime. [Final Year Project] (Unpublished)

Muhammad Hafizuddin Hakim Bin Abdul Hamid, Muhammad Hafizuddin Hakim (2010) Development of Photovoltaic (PV) based Electrical Power Generation. [Final Year Project] (Unpublished)

Muhammad Taheri bin Abdul Rashid, Muhammad Taheri (2010) Microwave Filter Computer Code. [Final Year Project] (Unpublished)

Nazirah binti Mat Rashid, Nazirah (2010) Triplen Harmonics Study at Gas District Cooling, University Teknologi PETRONAS (GDC, UTP). [Final Year Project] (Unpublished)

Norazwan b. Bidin, Norazwan (2010) Simulation Of Sinusoidal Commutation Of Brushless Motor For Starting Of Linear Engine - Generator. [Final Year Project] (Unpublished)

Nur Afifah binti Mohd Ramli, Nur Afifah (2010) Method of Detecting Unlighted Utility Street Lighting System. [Final Year Project] (Unpublished)

Nur Intan Marlyny Binti Abd Majid, Nur Intan Marlyny (2010) Simulation And Design Transmitter For Seabed Logging (SBL). [Final Year Project] (Unpublished)

Sohibatul Muizzah Bt Mohd Izhar, Sohibatul Muizzah (2010) Modeling and Predictive Control of Yeast Fermentation Process. [Final Year Project] (Unpublished)

Nurazlin binti Zakaria, Nurazlin (2010) Synchronization and Delay Techniques for Driving 1MHz Totem-Poled Power MOSFET Configuration. [Final Year Project] (Unpublished)

Nurul Farhana Binti Abdul Rahim, Nurul Farhana (2010) Power System Analysis At Plant Distribution System. [Final Year Project] (Unpublished)

Nur Hamizah Binti Shaidan, Nur Hamizah (2010) Removal of Nickel(II) ion from Industrial Waste Water employing Ion Exchange Process. [Final Year Project] (Unpublished)

Nurul Huda binti Mohamed Zakei, Nurul Huda (2010) Resonant Frequency vs Switching Frequency in Resonant Converter System. [Final Year Project] (Unpublished)

Le Phan Quynh Linh, Phan Quynh Linh (2010) Removal of malachite green oxalate from aqueous solution using sawdust as a biosorbent. [Final Year Project] (Unpublished)

Nurul Nisha Binti Saharudin, Nurul Nisha (2010) Foundation Fieldbus Interoperability Testing And System Configuration For Emerson Host. [Final Year Project] (Unpublished)

Raja Syahira binti Raja Abdul Aziz, Raja Syahira (2010) License Plate Recognition Using Wavelet Transform and Cluster-k-Nearest Neighbor Classifier. [Final Year Project] (Unpublished)

Raveen Kumar A/L Ramalingam, Raveen Kumar (2010) Development Of Hybrid Renewable Energy Based Electrical Power Generation System. [Final Year Project] (Unpublished)

Rozazilainidawati Bt Hj Ahmad, Rozazilainidawati (2010) Document Tracking System Using Rfid (RFID) D' Traxx. [Final Year Project] (Unpublished)

Siti Khadijah Binti Abdul Aziz, Siti Khadijah (2010) Development of Digital Controller for BLDC Motor Using dsPIC Controller. [Final Year Project] (Unpublished)

Siti Hajar bt Mat Jam, Siti Hajar (2010) Surface Electromyography (EMG) Signal Acquisition. [Final Year Project] (Unpublished)

Siti Sarah binti Md Yunus, Siti Sarah (2010) Electricity Forecasting for the Small Scale Power System Using Fuzzy Logic. [Final Year Project] (Unpublished)

Soeung Socheatra, Soeung (2010) Wireless Patient Monitoring System. [Final Year Project] (Unpublished)

Stella Anak Jagah@Subeng, Stella (2010) Scada System For Reverse Osmosis Desalination Plant With Enhanced Features. [Final Year Project] (Unpublished)

Syahira Nadia Shaharuddin, Syahira Nadia (2010) Radio Frequency Identification (RFID) Tagging System For Newborn Babies. [Final Year Project] (Unpublished)

Thian Hui Ching, Hui Ching (2010) Renewable Energy From UTP Water Supply. [Final Year Project] (Unpublished)

Ugasciny Arumugam, Ugasciny (2010) Inspection Robot for Power Line. [Final Year Project] (Unpublished)

Vusumuzi Emmanuel Dlamini, Emmanuel Dlamini (2010) Electromagnetic Wave Sensor For Seabed Logging Using The Fluxgate Technology. [Final Year Project] (Unpublished)

Wan Zulfadzhli bin Wan Zaki, Wan Zulfadzhli (2010) Improving The Voltage Runtime With The Combination Of Manganese Battery And Ultracapacitor. [Final Year Project] (Unpublished)

Zulfadli Bin Ahmad, Zulfadli (2010) Study and simulation on the effect of resistive medium to the propagation of electromagnetic wave using CST EM Studio software. [Final Year Project] (Unpublished)

Mohd Aizzat Bin Omar, Mohd Aizzat (2010) The Development of Thermal Insulation from Oil Palm Waste Material. [Final Year Project] (Unpublished)

Mohamad Hafiz Bin Mohd Hasan Abdullah, Mohamad Hafiz (2010) Thermal Mechanical Simulation of Corner Joint Configuration. [Final Year Project] (Unpublished)

Mohamad Hasrul Hilmi b. Khairul Aman, Mohamad Hasrul Hilmi (2010) Risk-Based Inspection – Flyash Erosion on Boiler Tube at Coal-Fired Power Plant. [Final Year Project] (Unpublished)

Najibah bt. Tajul Zahari, Najibah (2010) Effects of Rockwool and Glasswool on Thermal Performance of Intumescent Coating. [Final Year Project] (Unpublished)

Muhammad ‘Ammar bin Kassim, Muhammad ‘Ammar (2010) Residual Stress Measurements via X-ray Diffraction. [Final Year Project] (Unpublished)

Muhammad Zhafir Bin Abd Razak, Muhammad Zhafir (2010) Effects of Curvature on Impact Testing of Mild Steel SS400. [Final Year Project] (Unpublished)

Noor Shahilia Binti Ishak, Noor Shahilia (2010) Study of the Physical and Mechanical Properties of Sintered Nitrided Austenitic Stainless Steel Powder. [Final Year Project] (Unpublished)

Mohamad Ikhwan Bin Kori, Mohamad Ikhwan (2010) Study, Analysis and Implementation of Air-Fuel Ratio Control on Perodua Viva for Better Fuel Consumption. [Final Year Project] (Unpublished)

Kamarul Ariffin B Kasnin, Kamarul Ariffin (2010) Drag Reduction on How to Improve Fuel Consumption of a Vehicle. [Final Year Project] (Unpublished)

Mohd Aliff Omar bin Haris, Mohd Aliff Omar (2010) Micro Wind Turbine as the Power Supply for Micro Unmanned Aerial Vehicle. [Final Year Project] (Unpublished)

Muhammad Shahmi bin Ahmad Shauki, Muhammad Shahmi (2010) Effect of Fluid Flow on Subsea Pipe Line Riser. [Final Year Project] (Unpublished)

Sherrene Crystal Anak Basil, Sherrene Crystal (2010) Fabrication of Bonded Neodymium-Iron-Boron (NdFeB) Permanent Magnet through Warm Compaction. [Final Year Project] (Unpublished)

Muhammad Shazwan Bin Che Ismail, Muhammad Shazwan (2010) Study into the Effect of Elevated Temperature on the Friction, Wear Behavior and Wear Mechanism of Typical KTMB Rail Track using Pin-on-Disc Testing Technique. [Final Year Project] (Unpublished)

Muhammad Atuf Hashim, Muhammad Atuf (2010) Investigation Of The Responses Of Passive Vehicle Suspension Models In Order To Obtain Better Understanding Of Their Performance Limits. [Final Year Project] (Unpublished)

Ahmad Hazwan bin Ahmad Hariri, Ahmad Hazwan (2010) Life Cycle Assessment of Thermal Storage System. [Final Year Project] (Unpublished)

Fifizy Hafiz Safidil, Fifizy Hafiz (2010) Design Of A Crushing Mechanism For A Biomass Briquetting Machine. [Final Year Project] (Unpublished)

Sayidah Nafishah binti Mohd Sabri, Sayidah Nafishah (2010) Powder Metallurgy of Copper Based Composite with Silica Sand. [Final Year Project] (Unpublished)

Fazmi Yuhanis bt Awang, Fazmi Yuhanis (2010) Comparative Analysis of Machinability of Grey Cast Iron between Conventional and Non-conventional Machining. [Final Year Project] (Unpublished)

Anuar bin Ahmad, Anuar (2010) Thermal Stress Distribution in the Drum Brake of a Small Vehicle. [Final Year Project] (Unpublished)

Mohd Syahmi Bin Jamludin, Mohd Syahmi (2010) Optimal Gait Analysis of Quadruped Robot. [Final Year Project] (Unpublished)

Khairil Fadzli Bin Abu Bakar, Khairil Fadzli (2010) “A Numerical Investigation Into The Thermal Distribution In A Steam Cracking Furnace” Optimal Chemicals (M) Sdn. Bhd. Case Study. [Final Year Project] (Unpublished)

Nur Ain Binti Sulaiman, Nur Ain (2010) Transient Simulation of Energy in a Terraced House Using TRNSYS. [Final Year Project] (Unpublished)

Amirul Asyraf Bin Amiruddin, Amirul Asyraf (2010) Stress Analysis on Four Battered-Legs Offshore Jacket Structures. [Final Year Project] (Unpublished)

Syahril Izzat Bin Azmi, Syahril Izzat (2010) Drive mechanism for Personal Transporter (PT). [Final Year Project] (Unpublished)

Mohd Yasser Rabanie Bin Jamaluddin, Mohd Yasser Rabanie (2010) Design and Development of Steel Pipe Profiling Prototype. [Final Year Project] (Unpublished)

Nur Hazwana binti Kabol, Nur Hazwana (2010) Three Dimensional Analysis on Stress Concentration in a Gas Turbine Blade. [Final Year Project] (Unpublished)

Nurul Syahirah Binti Abdul Hamid, Nurul Syahirah (2010) Study On Harnessing Solar Energy For Power Supply From Chancellor Complex Roof. [Final Year Project] (Unpublished)

Nooratikah binti Saari @ Awang, Nooratikah (2010) Estimation of the probability of failure for Corrosion Under Insulation using Logistic Regression Model. [Final Year Project] (Unpublished)

Nor Hazwani bt Abdul Jalil, Nor Hazwani (2010) Engine and Fuel Optimization for Competition in Shell Eco Marathon 2010. [Final Year Project] (Unpublished)

Nazri Talib, Nazri (2010) Development of Spreadsheet MRP model for Panel Front Door Left Hand Side Assembly. [Final Year Project] (Unpublished)

Fikri Bin Muhamad Ismail, Fikri (2010) Computer Simulation of Hollow Buckling Cylinder Tubing by Finite Element Analysis. [Final Year Project] (Unpublished)

Mohd Khairul Izham Bin. Abdul Rahman, Mohd Khairul Izham (2010) Development Of Test Rig For The Study Of The Internal Blade Cooling. [Final Year Project] (Unpublished)

Juni Elyna Jubely, Juni Elyna (2010) Management, Selection, and Installation of engine, powertrain and accessories for The Shell Eco - Marathon 2010 - 1. [Final Year Project] (Unpublished)

Nuzul Hazwani Bt Mohamad Hanafi, Nuzul Hazwani (2010) Study the Effect of Temperature on Crack Propagation in Ceramics. [Final Year Project] (Unpublished)

Mohamad Kamal Ruzaini Bin Mohd Afifi, Mohamad Kamal Ruzaini (2010) Mechanical and Water Absorption Properties of Oil Palm Empty Fruit Bunch Reinforced Polyethylene Composites. [Final Year Project] (Unpublished)

Muhammad Saifuldin Bin Bakri, Muhammad Saifuldin (2010) The Effect of Trim and Form Process on the Plated Leads of IC Packages. [Final Year Project] (Unpublished)

Mohamad Suhaimi Bin Yahaya, Mohamad Suhaimi (2010) Management, Selection, Design and Installation of the running chassis (steering system) and accessories of a simple vehicle for competition in Shell Eco- Marathon 2010 - 1. [Final Year Project] (Unpublished)

Aiman Bin Thalaha, Aiman (2010) Failure Analysis Of The Mechanical Seal Used In The Condensate Booster Pump At Onshore Slugcatcher (OSC). [Final Year Project] (Unpublished)

Le Hoan, Hoan (2010) Simulation of Membrane Technology for CO2 Removal for cross-flow model using ASPEN HYSYS software. [Final Year Project] (Unpublished)

Mohd Aiman bin Mohd Noor, Mohd Aiman (2010) Analyzing Tri-Ethylene Glycol (TEG) Gas Dehydration System Performance of a Gas Processing Plant (GPP) with HYSYS Modeling. [Final Year Project] (Unpublished)

Muhammad Suaidi b Mansor, Muhammad Suaidi b Mansor (2010) Characteristic of Falling Film on Inclined Plane Using FLUENT 12.0. [Final Year Project] (Unpublished)

Muhammad Nabil Hakim bin Nasaruddin, Muhammad Nabil Hakim (2010) The Effects Of Cation-Anion Interaction On The Toxic Properties Of Ionic Liquids. [Final Year Project] (Unpublished)

Nor Mazelen Bt Mohamad Pauzi, Nor Mazelen (2010) Viscosity Studies Of Synthesized Polyol Ester From Jatropha Oil. [Final Year Project] (Unpublished)

Nur Atiqah Bt Abd Rahman, Nur Atiqah (2010) Heat Confining Properties of Carbon Dioxide and Other Polyatomic Greenhouse Gases which Potentially Causes Global Warming. [Final Year Project] (Unpublished)

Nurul Hidayah binti Abu Hanipah, Nurul Hidayah (2010) Process Safety Conflict Index (PSCI) For Toxic Release Using Risk Based Approach. [Final Year Project] (Unpublished)

Nurul Safiah Bt Mat Dagang, Nurul Safiah (2010) Carbon Dioxide Removal From Natural Gas By Using Silica Membrane. [Final Year Project] (Unpublished)

Muhammad Suhair bin Razlan, Muhammad Suhair (2010) Microwave Decomposition Of Malaysian Biomass. [Final Year Project] (Unpublished)

Nor Adilla binti Rashidi, Nor Adilla (2010) Dye Removal Employing Coagulation and Flocculation. [Final Year Project] (Unpublished)

Imran Bin Abdul Halim Zaki, Imran (2010) Studies on Heat Integration in Crude Preheat Train and the Effect of Fouling. [Final Year Project] (Unpublished)

Nurul Farhah bt Yaacob, Nurul Farhah (2010) Transesterification of Castor Oil to Biodiesel by using Mg-Al Hydrotalcites as a Catalyst. [Final Year Project] (Unpublished)

Rosniza Hanim Binti Abdul Rahim, Rosniza Hanim (2010) Recovery of Rh catalyst by using membrane process. [Final Year Project] (Unpublished)

Siti Nurmala bt Abdul Malik, Siti Nurmala (2010) Effect Of Rheological Property Of Blood Flow In Artery : A CFD Simulation Approach. [Final Year Project] (Unpublished)

Jaspreet Kaur A/P Amar Singh, Amar Singh (2010) Separation of Azeotropic Mixture (Water-Ethanol) Using Ionic Liquid. [Final Year Project] (Unpublished)

Mohd Jefri b Yusof, Mohd Jefri (2010) Separation of Carbon Dioxide from Natural Gas using Inorganic Membrane. [Final Year Project] (Unpublished)

Vignesh Kumar a/l Munusamy, Vignesh Kumar (2010) Development of Nanocrystalline Cellulose (NCC) from Microcrystalline Cellulose (MCC) via Dissolution using Ionic Liquid: 1-butyl-3-methylimidazolium hydrogen sulfate (BMIM HSO4). [Final Year Project] (Unpublished)

Norma Syahida binti Mazlan, Norma Syahida (2010) Design Of CO2 Removal System At Natural Gas Reserves. [Final Year Project] (Unpublished)

Ho, Ching Sheam (2010) The Suitability of Barite from East Coast of Peninsular Malaysia as Weighting Agent in Drilling Fluid. [Final Year Project] (Unpublished)

Looi , Lee Teng (2010) Study of Charging Cycle of Methane on Activated Carbon for Gas Storage Application. [Final Year Project] (Unpublished)

Siti Humairah Mohd. Aris, Siti Humairah (2010) Extraction Technique For Lipid From Microalgae For Biodiesel. [Final Year Project] (Unpublished)

Nurliyana Binti Kamarudin, Nurliyana (2010) Hydrogen Production via Aqueous Phase Reforming of Glycerol. [Final Year Project] (Unpublished)

Azman Shah bin Mohd Moideen, Azman Shah (2010) Transesterification Of Jatropha Oil To Biodiesel By Hydrotalcite Derived Mg-Al Oxide. [Final Year Project] (Unpublished)

Nurzarith Izzat Bt Othman, Nurzarith Izzat (2010) Analysis of the Hydro Thermal Behaviour of Waxy Crude during Pipeline Restart. [Final Year Project] (Unpublished)

Nor Azeanty binti Mohd Adzan, Nor Azeanty (2010) Pump as Turbine for Micro Hydro Power. [Final Year Project] (Unpublished)

Azliza Binti Ishak, Azliza (2010) Microstructural Characterization Of Polymer Plate Washer Produce By A Novel Technique. [Final Year Project] (Unpublished)

Mohamad Hazeem Bin Mohd, Mohamad Hazeem (2010) Separation of Zinc Chloride (ZnCl2) Metal Using Membrane Process. [Final Year Project] (Unpublished)

Toh , Jia Lin (2010) Design, Fabrication And Test Of Variable Height Solar Chimney. [Final Year Project] (Unpublished)

Amar Rahimi Bin Ishak, Amar Rahimi (2010) Development of Tronoh Silica Sand Fine Particles Production: Dry and Wet Milling Approaches. [Final Year Project] (Unpublished)

Muhd Zulkifli Md Zain, Muhd Zulkifli (2010) Failure Analysis of a Heat Exchanger Tube. [Final Year Project] (Unpublished)

Mohd Nor Azlan b Sudin, Mohd Nor Azlan (2010) Study on Effect of Nanosilica Sand Addition on Physical and Mechanical Properties of High Density Polyethylene (HDPE). [Final Year Project] (Unpublished)

Chua , Ken Seng (2010) Design of a Glass Wall Cleaning Mechanism. [Final Year Project] (Unpublished)

Muhammad Asyiq bin Ansorudin, Muhammad Asyiq (2010) A CFD Investigation Into The Thermal Comfort Of Building Envelope. [Final Year Project] (Unpublished)

Raffisyazana Binti Romli, Raffisyazana (2010) Performance Evaluation of Various Biomasses in a Gasifier Based Cook Stove. [Final Year Project] (Unpublished)

Ong, Yuin Yee (2010) Parametric Study for Carbon Dioxide Absorption from Natural Gas Using New Solvent. [Final Year Project] (Unpublished)

ERNIE NURAZERA BTE ZHARANI, ERNIE NURAZERA (2010) Hydrogen Storage Characterization Of Hydrotalcite-Derived Reduced Mixed Oxides. [Final Year Project] (Unpublished)

SYAZWAN B. ABD. RAHMAN, SYAZWAN (2010) Doping of Titanium Dioxide with Zirconia for Application of Dye Sensitized Solar Cell. [Final Year Project] (Unpublished)

Afiq Bin Mohd Laziz, Mohd Laziz (2010) CFD assessment of RANS model for simulation of fast mixing nozzle and coaxial flow using OpenFOAM. [Final Year Project] (Unpublished)

Lee , Fuhan (2010) Optimization of Desalination Process. [Final Year Project] (Unpublished)

Jazli Izzuddin Bin Jamaludin, Jazli Izzuddin (2010) Biomass Waste Potential And Its Effective Utilization In Malaysia Including An Experimental Work On Wood Torrefaction. [Final Year Project] (Unpublished)

Akmal Hakim Bin Jamaludin, Akmal Hakim (2010) Temperature Variation Effects Towards Formation of Calcite and Aragonite from Seawater. [Final Year Project] (Unpublished)

Mohd Hafis Irsyad Bin Mohd Faudzi, Mohd Hafis Irsyad (2010) Thermodynamic Analysis of Glycerol Steam Reforming for Hydrogen Production. [Final Year Project] (Unpublished)

Mohd Jeffri bin Mat Amin, Mohd Jeffri (2010) Development of Asset Life Cycle Management System in Process Plant. [Final Year Project] (Unpublished)

Nur Fathanah binti Norhayalim, Nur Fathanah (2010) Thermodynamic Analysis of Transesterification of Palm Oil to Biodiesel. [Final Year Project] (Unpublished)

BAYRAM OVEZOV, BAYRAM (2010) HEAVY METAL ADSORPTION ON MONTMORILLONITE AS A MODIFIER TO CARBON PASTE ELECTRODES. [Final Year Project] (Unpublished)

Maria Elena Bt Zarul Ahmad, Maria Elena (2010) Study of FAME Formation Using Porous Membrane (Hydrophilic & Hydrophobic). [Final Year Project] (Unpublished)

Mohamad Fakarurazi Abd Aziz, Mohamad Fakarurazi (2010) Desulfurization Of Crude Oil Model Using Integrated Technique: Fe/Tio2 Photooxidation And Ionic Liquid Extraction. [Final Year Project] (Unpublished)

Mohamad Rizal bin Budin, Mohamad Rizal (2010) A Study on Calcination Parameters for Co-based Fischer-Tropsch Nanocatalyst. [Final Year Project] (Unpublished)

Lanai Wan, Alvin (2010) The Effects of Filler Loading on Mechanical Properties of Coir and Bagasse Reinforced Polyethylene Biocomposites. [Final Year Project] (Unpublished)

Mohd Nashriq Bin Zulkefle, Mohd Nashriq (2010) Microstructure Studies on Commercially Available Heat Shrinkable Polymeric Materials. [Final Year Project] (Unpublished)

Ahmir B Mohd Nazri, Ahmir (2010) Analysis Of The Air Distribution Through Ventilation Duct In Block 13 Lecturers’s Office Space. [Final Year Project] (Unpublished)

Nur Fauzianie Roslan, Nur Fauzianie (2010) Influence Of Heat Treatment Temperature On Mechanical Properties Of Heat Affected Zone (Haz). [Final Year Project] (Unpublished)

Hairani Sudin, Hairani (2010) Study Into The Effect Of Crude Palm Oil (CPO) As A Cutting Fluid On Surface Finish During Milling. [Final Year Project] (Unpublished)

Mohamad Amirul bin Mohamad Yusuf, Mohamad Amirul (2010) Stress Intensity Factor for a Crack Emanating from a Corner of a Square Hole. [Final Year Project] (Unpublished)

Mohd Faizal Bin Muhamad Tajudin, Mohd Faizal (2010) Study On The Hardness And Microstructure Properties Of Nitrided Ferritic Stainless Steel Powder After Sintering. [Final Year Project] (Unpublished)

Yasmin Binti Mohd. Azmi, Yasmin (2010) Study the Effects of Carbon Nanotube and Expandable Graphite On The Performance Of Intumescent Fire Retardant Coating. [Final Year Project] (Unpublished)

Leong , Ian Mun Choong (2010) Design and Fabrication of a Fuel Efficient Simple Vehicle Chassis. [Final Year Project] (Unpublished)

Pau , Shang Pei (2010) Study of Liquid Flow with Bubbles in Pipes. [Final Year Project] (Unpublished)

Nik Afifi Bin Nik Abd Rahim, Nik Afifi (2010) Stress Analysis of Steam Methane Reformer Tubes. [Final Year Project] (Unpublished)

Hasran bin Che Ismail, Hasran (2010) Stability Analysis of Micro Unmanned Aerial Vehicle during Vertical Take-Off and Landing. [Final Year Project] (Unpublished)

Abid Haq bin Abdul Aziz, Abid Haq (2010) Electrochemical Impedance Spectroscopy (EIS) Analysis of Film Formation in CO2 Corrosion. [Final Year Project] (Unpublished)

Vinod A/L Chandra Sayakaran, Vinod (2010) A Study on the Stiffness of Solid And Hollow Section Brass. [Final Year Project] (Unpublished)

Amir Ainulariff bin Mahmud, Amir Ainulariff (2010) Implementation of Crack Opening Displacement and Compliance Methods In Fatigue Crack Growth Tests. [Final Year Project] (Unpublished)

Tan Kwong Hoe, Kwong (2010) Vehicle Ride Investigation Of Myvi With Adams Car. [Final Year Project] (Unpublished)

Ahmad Yusof bin Nazlan, Ahmad Yusof (2010) The Design of an Autoguide System Prototyped for Conventional Vehicle on Highway. [Final Year Project] (Unpublished)

Mohamad Iskandar Bin Mahbob, Mohamad Iskandar (2010) Study Of Calcium Ions Effect On Pitting Corrosion Using Electrochemical Noise Analysis (Ecn). [Final Year Project] (Unpublished)

Tan Boon Tat, Boon Tat (2010) Determination Of Heat Transfer Coefficients In Heat Exchangers By Genetic Algorithm. [Final Year Project] (Unpublished)

Mazuan Bin Ibrahim, Mazuan (2010) Design And Fabrication Of A Simple Vehicle For Competition In Shell Eco- Marathon 2010 (Vehicle Frame And Body Design). [Final Year Project] (Unpublished)

Muhammad Syafeeq bin Ebining Amir, Muhammad Syafeeq (2010) Impact Resistance of Polyurea Coating. [Final Year Project] (Unpublished)

Muhammad Razi bin Jusoh, Muhammad Razi (2010) Design and Analysis of a Compact In-Wheel Motor with New Disc Brake System for Retrofit Hybrid Electric Vehicle Application. [Final Year Project] (Unpublished)

Houng Nai Hui, Nai Hui (2010) Development Of Walking Gaits For Quadruped Robot (4-Legged Robot). [Final Year Project] (Unpublished)

Yong, Teck Kiong (2010) Mechanical Properties of Filament Wound Composite Pipe for Well Completion Pup Joint Application. [Final Year Project] (Unpublished)

Mohd. Zhafri bin Mahdi, Mohd. Zhafri (2010) A Study Of Co-Firing Biomass With Coal As Potential Fuel. [Final Year Project] (Unpublished)

Nur Aimi Binti Abdul Rahim, Nur Aimi (2010) Attitude Maneuver of a Flexible Satellite by Using Thrusters based on PD Controller. [Final Year Project] (Unpublished)

Ahmad Wazini Bin Ahmad Tajuddin, Ahmad Wazini (2010) Design of Interlocking for the Micro Unmanned Aerial Vehicle Vertical Take-Off and Landing Mechanism. [Final Year Project] (Unpublished)

Gui, Carina Gui Su Ping (2010) Burst Test Simulation of Corroded Pipelines. [Final Year Project] (Unpublished)

Raudhah Binti Ab Majid, Raudhah (2010) Design and Development of an Innovative Flat Plate Solar Collector. [Final Year Project] (Unpublished)

Mohd Hazran bin Mat Rahim, Mohd Hazran (2010) Gas Turbine Internal Blade Cooling Study. [Final Year Project] (Unpublished)

Nur Farah ‘Izzati Bt Zakaria, Nur Farah ‘Izzati (2010) Effects of Ceramic Fibre on Char Strength of Intumescent Coating. [Final Year Project] (Unpublished)

Azman Bin Daud, Azman (2010) A Study Of Solar Chimney Performance Using Fluent Software. [Final Year Project] (Unpublished)

Muhammad Redzuan bin Tauhid Ahmad, Muhammad Redzuan (2010) Computer Simulation of Biomass Gasification Process for Oil Palm Fronds in a Downdraft Gasifier. [Final Year Project] (Unpublished)

Ahmad Rafie bin Mohmad Tahir, Ahmad Rafie (2010) Design and Development of Ball Bearing for Inclined Loads. [Final Year Project] (Unpublished)

Mohd Norhafiz Bin Othman, Mohd Norhafiz (2010) Design and Development of Innovative Solar Water Heater. [Final Year Project] (Unpublished)

Dhinakaran Govindasamy, Dhinakaran Govindasamy (2010) Cfd Of Double-Wedge Spiked Intake Of The Supersonic Jet Engine. [Final Year Project] (Unpublished)

Abdul Hazim Bin Rahmat, Abdul Hazim (2010) Improvement Of Engine Performance To Reduce Fuel Consumption Of �A Single Cylinder Spark Ignition Engine. [Final Year Project] (Unpublished)

Noor Syaffynas bt Yusoff, Noor Syaffynas (2010) Centrifugal Pump Characteristics for Crude Oil Transfer. [Final Year Project] (Unpublished)

Mohamed Khalil Bin Mohamed Razif, Mohamed Khalil (2010) Study On Effect Of Nanosilica Sand Addition On Physical And Mechanical Properties Of Alumina Powder. [Final Year Project] (Unpublished)

Ruzanna Binti Abu Bakar, Ruzanna (2010) Computer Aided Design of Semi-submersible for Deepwater Operations. [Final Year Project] (Unpublished)

Khairul Anuar B Kamarul Baharin, Khairul Anuar (2010) Design And Fabrication Of Biomass Burner For Gas To Gas Heat Exchanger. [Final Year Project] (Unpublished)

Norhafiza Binti Mohd Zukepeli, Norhafiza (2010) Stress Analysis Of Aboveground Atmospheric Storage Tank Due To Edge Settlement. [Final Year Project] (Unpublished)

Lee, Jin Ming (2010) Three-Dimensional Analysis on Thermal Stresses in A Perforated Disc Brake of Vehicle. [Final Year Project] (Unpublished)

Siva Sankara Arudra, Siva (2010) Study Of Corrosion And Engine Performance Characteristics Of Emulsified Diesel. [Final Year Project] (Unpublished)

Quartos Radintletse Maremo Mamabolo, Quartos (2010) Design Of A Heat Recovery System For Bio-Oil Upgradation. [Final Year Project] (Unpublished)

Muhammad Muizzuddin Bin Mazlan, Muhammad Muizzuddin (2010) Cryosurgery Tool For Cataract Removal. [Final Year Project] (Unpublished)

Ahmad Suhaimi Bin Sokiman, Ahmad Suhaimi (2010) Effects of Wall Temperature on the Viscoelastic Fluid Flow through Gradual Contraction. [Final Year Project] (Unpublished)

Mohd Azahari bin Mohamed Buang, Mohd Azahari (2010) Study of PWHT Microstructures and Mechanical Properties for Mild Steel and SA106B Pipe Material. [Final Year Project] (Unpublished)

Zieerwan Zainal, Zieerwan (2010) Sand Erosion Inside Pipe Of Crude Oil With 90° Bend By Cfd. [Final Year Project] (Unpublished)

Che E Zwan bin Che Asaari , Che E Zwan (2010) Numerical Study on Influence of. [Final Year Project] (Unpublished)

Farhanah Binti Ismail, Farhanah (2010) Reliability Modelling of a Diesel Engine System Using Fault Tree Analysis Approach. [Final Year Project] (Unpublished)

Annaorazov Rejep, Annaorazov (2010) Fundamental Study of Sprays of Different Fluids. [Final Year Project] (Unpublished)

Mohd Zafrin bin Zainal Azmi, Mohd Zafrin (2010) The Analysis of Calcium Ions Effect on CO2 Corrosion Using Electrochemical Impedance Spectroscopy. [Final Year Project] (Unpublished)

Mohd Haziq Bin Ahmad Bakhtiar, Mohd Haziq (2010) Design of a Multidisc Pump for Slurry Transfer. [Final Year Project] (Unpublished)

Iylia Elena binti Abdul Jamil, Iylia Elena (2010) Modelling of Pseudo Hydrostatic Force in Two – Phase Flow with Different Layers. [Final Year Project] (Unpublished)

Thayyibah Jamalullail, Thayyibah (2010) Evaluation of Flat Plate Enhanced with Phase Change Material PCM. [Final Year Project] (Unpublished)

Saw, Soon Wei (2010) Study Of A Water Cooled Wall To Reduce Residential Indoor Temperatures At Night. [Final Year Project] (Unpublished)

Muhamad Hafiz bin Bohari, Muhamad Hafiz (2010) The Influence of Varying Polymer Matrices on the Mechanical Properties of Biocomposites. [Final Year Project] (Unpublished)

Muhammad Taufiq bin Tajuddin, Muhammad Taufiq (2010) Stress Analysis on Water Injection Turbine Meter Blades. [Final Year Project] (Unpublished)

Wan Faradinah binti Zainal Abidin, Wan Faradinah (2010) Performance Evaluation Of Thermal Energy Storage For District Cooling Plant. [Final Year Project] (Unpublished)

Muhammad Farid bin Mohamed, Muhammad Farid (2010) Stress Concentration Factor at Two Adjacent Nozzles in a Cylindrical Pressure Vessel. [Final Year Project] (Unpublished)

Nurul Syafiqa Binti Misran, Nurul Syafiqa (2010) Fabrication of Micro Unmanned Aerial Vehicle Using Rapid Prototyping and Rapid Tooling. [Final Year Project] (Unpublished)

Mohd Dzulfikry Bin Mohd Aris, Mohd Dzulfikry (2010) Design and Analysis of Robotic Device for Cleaning Window Glass Panel in High Rise Building. [Final Year Project] (Unpublished)

Norsaiful Bin Rosli, Norsaiful (2010) Effects of Drilling Fluid Rheological Properties on Drill Cuttings Transport. [Final Year Project] (Unpublished)

Wendimu Fanta Gemechu, Wendimu (2010) The Design of Automated Control System for Wastewater Treatment Plant. [Final Year Project] (Unpublished)

Ahmad Luqman Al-Hakim Bin Abd Malik, Ahmad Luqman Al-Hakim (2010) Analysis of a Pneumatic Artificial Muscle and Construction of a Model. [Final Year Project] (Unpublished)

Mohd Azmi Bin Hayat, Mohd Azmi (2010) The Study of Sandpapering Effect on Mechanical Properties of Aircraft Materials (Aluminum Alloy and Carbon Fiber Reinforce Plastic). [Final Year Project] (Unpublished)

Muhammad Zakwan bin Amran, Muhammad Zakwan (2010) Influence of Sodium Chloride (NaCl) Deposition on the Atmospheric Corrosion of Galvanized Steel Roofing. [Final Year Project] (Unpublished)

PUI , WEI JUI (2010) Effect of Recycling on Mechanical Behaviours of Coconut-HDPE Biocomposite. [Final Year Project] (Unpublished)

Mohd Badaruddin Bin Mahmod, Mohd Badaruddin (2010) Simulation of Rotating Seal Ring. [Final Year Project] (Unpublished)

Faizul Azizi b. Ahmad Nordin, Faizul Azizi (2010) Effect of welding tool geometry on microstructure and hardness in Friction Stir Welded Plates. [Final Year Project] (Unpublished)

Noor Atilia binti Selamat, Noor Atilia (2010) Development of Biocomposite: The Influence of Natural Fillers. [Final Year Project] (Unpublished)

Farah Liyana Binti Ab. Ghani, Farah Liyana (2010) Uniformity of Plating Thickness of IC Packages at Various Locations on its Lead Frame. [Final Year Project] (Unpublished)

SYAZANA BT NADZIR, SYAZANA (2010) Mathematical Modelling, Computation & Analysis of Oil Pipeline Buckling. [Final Year Project] (Unpublished)

Mohammad Amer Qais Abro, Amer (2010) Computational Fluid Dynamics Study Of Airflow Throw A Car’s Radiator. [Final Year Project] (Unpublished)

Siti Nur Jehan binti Ismail, Siti Nur Jehan (2010) Resin Infusion Strategy For Wind Turbine Blade. [Final Year Project] (Unpublished)

Muhammad Hariri Bin Wagiman, Muhammad Hariri (2010) Thermal Effect on a Plate While Welding Using Finite Element Method. [Final Year Project] (Unpublished)

Khairil Nizam Bin Mohamad Darus, Khairil Nizam (2010) Palm Waste Briquette & Bio-Briquette As Potential Fuel. [Final Year Project] (Unpublished)

Abdul Hadi Bin Alias, Abdul Hadi (2010) Failure Analysis of Ethylene Cracking Heater, ET-O-F-105 Tube. [Final Year Project] (Unpublished)

Azmal Khuzairi Bin Abdul Wahab, Azmal Khuzairi (2010) Investigation into the Abrasion Resistance of Polyurea Coating by the Taber Abraser. [Final Year Project] (Unpublished)

Mohd Rahman bin Mohd Rosli, Mohd Rahman (2010) The Tribological Study on Metallic Materials Which Had Undergone Surface Preparations Using Pin-on-Disc Testing Technique. [Final Year Project] (Unpublished)

Kumanan A/L Raman, Kumanan (2010) Manufacturing Systems Design For Mass Production Of Disc Brakes. [Final Year Project] (Unpublished)

Nurhafeezan Bin Malik, Nurhafeezan (2010) Study on the Effect of NanoSilica Sand Addition to the Physical and Mechanical Properties of Iron Powder. [Final Year Project] (Unpublished)

Abdul Halim bin Razak , Abdul Halim (2010) The Effects Of Applied Potential And Coating Thickness On Cathodic Disbondment Of Polyurea Coating. [Final Year Project] (Unpublished)

Lee, Keng Huai (2010) Design of Tracking System for Alzheimer Patients. [Final Year Project] (Unpublished)

Wan Norizan B Wan Amat, Wan Norizan (2010) Analysis Of Boiler Tube Leakage Using Artificial Neural Network. [Final Year Project] (Unpublished)

Shah Nadzri Bin Jasmir, Shah Nadzri (2010) Reliability Centered Maintenance Implementation at CUF Kertih. [Final Year Project] (Unpublished)

Mohammad Sollehuddin Bin Sabtu, Mohammad Sollehuddin (2010) Development of Alternative Fuel Briquettes from Poultry Processing Waste (Energy Content and Chemical Characteristic). [Final Year Project] (Unpublished)

Ahmad Helmi Mohd Amin, Ahmad Helmi (2010) Effects of Surface Roughness on the Adhesion and Corrosion Properties of Organic Coating Applied on One Surface of One Sample Set of Mild Steel. [Final Year Project] (Unpublished)

Muhd Syafiq bin Suhaimi, Muhd Syafiq (2010) Study On Improving The Conversion Efficiencies Of Photovoltaic Solar Panels Through The Use Of Water Film. [Final Year Project] (Unpublished)

Yap, Pun Chee (2010) Corrosion Prediction Model Of Corroded Pipeline Using Gumbel. [Final Year Project] (Unpublished)

Asba Madzidah binti Abu Bakar, Asba Madzidah (2010) Performance of Polyurea Coating Under Water Immersion at High Temperature. [Final Year Project] (Unpublished)

Qurratu’aini Binti Ismail, Qurratu’aini (2010) Melt Flow Analysis of Novel Polymer Plate Washer Using Computational Fluid Dynamic (CFD). [Final Year Project] (Unpublished)

Saufi B Ali, Saufi (2010) Numerical Study On The Three Dimensional Flow Of Airfoilflat Plate Combination With Gap. [Final Year Project] (Unpublished)

Haravinthan Arumugam, Haravinthan (2010) Titanium Dioxide-Aluminium High Temperature Thermite Reaction. [Final Year Project] (Unpublished)

Muhammad Zahid bin Md Bahari, Muhammad Zahid (2010) Study Of A Backup Ve_Tilatio_ System For Lecturers’ Office Space. [Final Year Project] (Unpublished)

Muhammad Hafiz Bin Rohimi, Muhammad Hafiz (2010) A Study of An Oscillating Water Column (OWC) to Harvest Wave Energy Using FLUENT Software. [Final Year Project] (Unpublished)

Mohd Syahmi Bin Mohd Yusof, Mohd Syahmi (2010) Modeling Intergranular Fracture at Elevated Temperature. [Final Year Project] (Unpublished)

Mohammad Noor Bin Md Yassin, Mohammad Noor (2010) The Effect Of Pre-Tinning Process With Respect To Gold Embrittlement Issue For Gold Plated Pins. [Final Year Project] (Unpublished)

Mohd Aiman bin Kamaru zaman, Mohd Aiman (2010) Effects of Process Parameters on Strength of Swept Friction Stir Spot Welded Plate. [Final Year Project] (Unpublished)

Mohd Azrul bin Samsuddin, Mohd Azrul (2010) Experimental & Numerical Investigation on the effect of inlet shape of inclined heated channel. [Final Year Project] (Unpublished)

Mohd Fathi Bin Ismail, Mohd Fathi (2010) The Tribological Study On Polymer Matrix Composite Using Pin On Disc Testing Technique. [Final Year Project] (Unpublished)

Mohd Haidzir Bin Anuar, Mohd Haidzir (2010) Studies & Simulation Of Train Suspension System. [Final Year Project] (Unpublished)

Mohd Hanis B Mohd Daud, Mohd Hanis (2010) Thermo-Mechanical Modeling Of Friction Stir Welded Plate. [Final Year Project] (Unpublished)

Mohd Izuddin Bin Ismail, Mohd Izuddin (2010) Failure Analysis on Stainless Steel Tubing of a Lube Oil Console for Gas Generator. [Final Year Project] (Unpublished)

Mohd Kamil Azran bin Md Nadzar, Mohd Kamil Azran (2010) The Effect Of Anti Roll Bar On The Heavy Vehicle Handling. [Final Year Project] (Unpublished)

Mohd Khairul Munir B Kamaruzaman, Mohd Khairul Munir (2010) Improvement on Wear Resistance of 316 Austenitic Stainless Steel by High Temperature Nitriding Technique. [Final Year Project] (Unpublished)

Mohd.Shaiful Baharuddin bin Halim, Mohd.Shaiful Baharuddin (2010) Calorific Values of PETRONAS Cokes Nitrated at Various Temperatures. [Final Year Project] (Unpublished)

Noor Hidayu Bt Alishopian, Noor Hidayu (2010) Mathematical Modelling, Computation & Analysis of Oil Tanker Stability. [Final Year Project] (Unpublished)

Noor Ilyia Binti Mohd Yusnee, Noor Ilyia (2010) Life Cycle Assessment of Gas District Cooling Plant Absorption Chiller at Universiti Teknologi Petronas. [Final Year Project] (Unpublished)

Nor A’tiqah Bt Mohd Nurulhuda, Nor A’tiqah (2010) Harmonic Response of the Offshore Crane Boom Structure. [Final Year Project] (Unpublished)

Noraini Binti Alias, Noraini (2010) Effect of Sintering Time on Properties of Carbon Nanotubes Reinforced Aluminum Composite. [Final Year Project] (Unpublished)

Nurul Rawaida Ain Burhani, Nurul Rawaida Ain (2010) Effect of Compaction Pressure on Final Properties of Multiwall Carbon Nanotubes (MWCNTs) reinforced Aluminum (Al) Composite. [Final Year Project] (Unpublished)

Prathom Suwanno A/L Pet, Prathom Suwanno (2010) Study on Microstructure and Mechanical Properties of Traditional Keris Blade. [Final Year Project] (Unpublished)

Rima Rafiza A. Malik, Rima Rafiza (2010) Study into the Effect of Crude Palm Oil (CPO) as a Cutting Fluid on the Tool Wear and Chip Formation during Lathe Cutting Operation. [Final Year Project] (Unpublished)

Rubiah Binti Ab Ghani, Rubiah (2010) Study into the Effect of Crude Palm Oil (CPO) as a Cutting Fluid on the Surface Finish and Roundness During Lathe Cutting Operation. [Final Year Project] (Unpublished)

Shahida Shazlin binti Saidin, Shahida Shazlin (2010) The Investigation into the Effect of Viscosity to the Friction and Wear Behaviour of Automotive Gear Oils. [Final Year Project] (Unpublished)

Siti Nor Fazilah Binti Abdul Basir, Siti Nor Fazilah (2010) Powder Metallurgy of Iron-based Matrix Composite with Silicon Carbide (SiC) Reinforcement. [Final Year Project] (Unpublished)

SyahrulEhwan Bin Lamat, SyahrulEhwan (2010) Studies and Simulation of Five Link Suspension Systems. [Final Year Project] (Unpublished)

Tengku Shahril Nizam Bin Tengku Mohd Yusof, Tengku Shahril Nizam (2010) Effect of a Moving Load to A Jetty Gangway. [Final Year Project] (Unpublished)

Yew , Kwang Liang (2010) Design Of A Steering Mechanism For A Personal Transporter. [Final Year Project] (Unpublished)

Zikri Fahmi Bin Zainon, Zikri Fahmi (2010) Effect Of Sintering Time On Physical And Mechanical Properties Of Carbon Nano-Tubes Reinforced Copper Composite. [Final Year Project] (Unpublished)

Abdul Rauf Mohamad Nahar, Abdul Rauf (2010) Design of a Steering Linkage Mechanism for a Simple Three Wheeled Car. [Final Year Project] (Unpublished)

Ahmad Firdaus bin Suhardi, Ahmad Firdaus (2010) Analysis of Compaction and Sintering of Compacted Silica Sand and Clay Mixture. [Final Year Project] (Unpublished)

Ahmad Hussaini Bin Hamdan, Ahmad Hussaini (2010) Study and Analysis of Fabrication and Properties of Sand Lime Bricks. [Final Year Project] (Unpublished)

Dayang Fittri Noorkhairunnisa, Dayang Fittri Noorkhairunnisa (2010) Modification and Evaluation of Water Turbine for Power Generation. [Final Year Project] (Unpublished)

Faezah Binti Mohd Nor, Faezah (2010) A Study of The Effect of Weathering on The Expansion of Intumescent Fire Retardant Coating. [Final Year Project] (Unpublished)

Hasliza bt Omar, Hasliza (2010) A Study on Highway Guardrail Design Improvement. [Final Year Project] (Unpublished)

Khairul Anwar bin Azhari, Khairul Anwar (2010) Design of Food Processing Mechanism for An Automatic Sandwich-Making Vending Machine with Filling Selection. [Final Year Project] (Unpublished)

Khairul Izzat Bin Amriem, Khairul Izzat (2010) Computer Aided Design (CAD) of Tension Leg Platform (TLP) Hull for Deepwater Operation. [Final Year Project] (Unpublished)

Khairul Jafni B Abd Hamid, Khairul Jafni (2010) Development of Alternative Fuel Briquettes from Poultry Processing Waste (Collecting, Storage and Handling). [Final Year Project] (Unpublished)

Khairunnisa Bte Md. Said, Khairunnisa (2010) Study On Solar Organic Rankine Cycle Using Geothermal Energy. [Final Year Project] (Unpublished)

Mohamad Haniff Bin Zamahsari, Mohamad Haniff (2010) Studies And Simulations Of Semi-Active Vehicle Suspension System. [Final Year Project] (Unpublished)

AHMAD, MOHD HILMAN (2010) CORRELATION OF ELECTRICAL RESISTIVITY WITH SELECTED SOIL PARAMETERS WITH VARIATION IN MINEROLOGY, ORGANIC CONTENTS AND TEMPERATURE. [Final Year Project] (Unpublished)

SHAHRIN, MOHD SHAFIQ (2010) Properties of Different Aggregate Types Use As Highway Construction Material. [Final Year Project] (Unpublished)

Mohd Syazwan, Ramlan (2010) Response of a SPAR Offshore Platform to Wave Action- An Experimental Study. [Final Year Project] (Unpublished)

MUHAMMAD SUHAIMI, MUHD ALIFF (2010) TENSILE AND FATIGUE PROPERTIES OF BITUMINOUS MIXTURES INCORPORATING DIFFERENT BITUMEN GRADES. [Final Year Project] (Unpublished)

Badarudin, Muhamad Hafidz Al Fatah (2010) AUTOMATED EXAM PROCEDURES CONTROLLER. [Final Year Project] (Unpublished)

MAT AYUS, NURUL ATIQAH (2010) A FUZZY LOGIC APPROACH IN MODELLING AND SIMULATION OF A SCHEDULING SYSTEM FOR HOSPITAL ADMISSIONS USING ARENA® SIMULATION SOFTWARE. [Final Year Project] (Unpublished)

Aliah, Muhammad Hidayat (2010) CULTIVATION OF MICROALGAE FOR BIO OIL PRODUCTION AND CARBON DIOXIDE REMOVAL. [Final Year Project] (Unpublished)

ALlAH, MUHAMMAD HID A Y AT (2010) CULTIVATION OF MICROALGAE FOR BIO OIL PRODUCTION AND CARBON DIOXIDE REMOVAL. [Final Year Project] (Unpublished)

S. Krishnan, Lavin Raj (2010) DEVELOPMENT OF PROCESS SAFETY MANAGEMENT SYSTEM FOR WATER-NATURAL GAS SEPARATION SYSTEM. [Final Year Project] (Unpublished)

GHAFAR, NURUL SAADAM (2010) DEVELOPMENT OF SENSORY-MODE INTERACTION IN HAPTIC SYSTEM. [Final Year Project] (Unpublished)

AZIZ, AHMAD HAZIQ (2010) STRESS CONCENTRATION FACTOR AT BRANCH PIPE UNDER INTERNAL PRESSURE. [Final Year Project] (Unpublished)